Early Stages Of Biofilm Formation Research Articles

Modified oxylipins as inhibitors of biofilm formation in Staphylococcus epidermidis

New approaches to combating microbial drug resistance are being sought, with the discovery of biofilm inhibitors considered as alternative arsenal for treating infections. Natural products have been at the forefront of antimicrobial discovery and serve as inspiration for the design of new antibiotics. We probed the potency, selectivity, and mechanism of anti-biofilm activity of modified oxylipins inspired by the marine natural product turneroic acid. Structure-activity relationship (SAR) evaluation revealed the importance of the trans-epoxide moiety, regardless of the position, for inhibiting biofilm formation. trans-12,13-epoxyoctadecanoic acid (1) and trans-9,10 epoxyoctadecanoic acid (4) selectively target the early stage of biofilm formation, with no effect on planktonic cells. These compounds interrupt the formation of a protective polysaccharide barrier by significantly upregulating the ica operon’s transcriptional repressor. This was corroborated by docking experiment with SarA and scanning electron micrographs showing reduced biofilm aggregates and the absence of thread-like structures of extrapolymeric substances. In silico evaluation revealed that 1 and 4 can interfere with the AgrA-mediated communication language in Staphylococci, typical to the diffusible signal factor (DSF) capacity of lipophilic chains.

Attenuation of biofilm and virulence factors of Pseudomonas aeruginosa by tetramethylpyrazine-gold nanoparticles

Pseudomonas aeruginosa is often identified as the causative agent in nosocomial infections. Their adapted resistance makes them strong towards antimicrobial treatments. They protect and empower their survival behind strong biofilm architecture that works as their armor toward antimicrobial therapy. Additionally, P. aeruginosa generates virulence factors, contributing to chronic infection and recalcitrant phenotypic characteristics. The current study utilizes the benevolence of nanotechnology to develop an alternate technique to control the spreading of P. aeruginosa by limiting its biofilm and virulence development. This study used a natural compound, tetramethylpyrazine, to generate gold nanoparticles. Tetramethylpyrazine-gold nanoparticles (Tet-AuNPs) were presented in spherical shapes, with an average size of 168 ± 52.49 nm and a zeta potential of −12.22 ± 2.06 mV. The minimum inhibition concentration (MIC) of Tet-AuNPs that proved more than 90 % effective in inhibiting P. aeruginosa was 256 μg/mL. Additionally, it also shows antibacterial activities against Staphylococcus aureus (MIC, 256 μg/mL), Streptococcus mutans (MIC, 128 μg/mL), Klebsiella pneumoniae (MIC, 128 μg/mL), Listeria monocytogenes (MIC, 256 μg/mL), and Escherichia coli (MIC, 256 μg/mL). The sub-MIC values of Tet-AuNPs significantly inhibited the early-stage biofilm formation of P. aeruginosa. Moreover, this concentration strongly affected hemolysis, protease activity, and different forms of motilities in P. aeruginosa. Additionally, Tet-AuNPs destroyed the well-established mature biofilm of P. aeruginosa. The expression of genes linked with the biofilm formation and virulence in P. aeruginosa treated with sub-MIC doses of Tet-AuNPs was shown to be significantly suppressed. Gene expression studies support biofilm- and virulence-suppressing effects of Tet-AuNPs at the phenotypic level.

Insights into betulinic acid as a promising molecule to fight the interkingdom biofilm Staphylococcus aureus–Candida albicans

The demand for antibiofilm molecules has increased over several years due to their potential to fight biofilm-associated infections, such as those including the interkingdom Staphylococcus aureus-Candida albicans occurring in clinical settings worldwide. Recently, we identified a pentacyclic triterpenoid compound, betulinic acid, from invasive macrophytes, with interesting antibiofilm properties. The aim of the present study was to provide insights into the mechanism of action of betulinic acid against the clinically relevant bi-species S. aureus-C. albicans biofilms. Microscopy examinations, flow cytometry and crystal violet assays confirmed that betulinic acid was effective at damaging mature S. aureus-C. albicans biofilms or inhibiting their formation, reducing biofilm biomass by 70% on average and without microbicidal activity. The results suggested an action of betulinic acid on cell membranes, inducing changes in properties such as composition, hydrophobicity and fluidity as observed in C. albicans, which may hinder the early adhesion step, biofilm growth and the physical interactions of both microbial species. Further results of real-time polymerase chain reaction argued in favour of a reduction in S. aureus-C. albicans physical interaction due to betulinic acid by the modulation of biofilm-related gene expression, as observed in early stages of biofilm formation. This study revealed the potential of betulinic acid as a candidate agent for the prevention and treatment of S. aureus-C. albicans biofilm-related infections.

Oxygen-dependent biofilm dynamics in leaf decay: an in vitro analysis

Biofilms are important in the natural process of plant tissue degradation. However, fundamental knowledge of biofilm community structure and succession on decaying leaves under different oxygen conditions is limited. Here, we used 16S rRNA and ITS gene amplicon sequencing to investigate the composition, temporal dynamics, and community assembly processes of bacterial and fungal biofilms on decaying leaves in vitro. Leaves harvested from three plant species were immersed in lake water under aerobic and anaerobic conditions in vitro for three weeks. Biofilm-covered leaf samples were collected weekly and investigated by scanning electron microscopy. The results showed that community composition differed significantly between biofilm samples under aerobic and anaerobic conditions, though not among plant species. Over three weeks, a clear compositional shift of the bacterial and fungal biofilm communities was observed. The alpha diversity of prokaryotes increased over time in aerobic assays and decreased under anaerobic conditions. Oxygen availability and incubation time were found to be primary factors influencing the microbial diversity of biofilms on different decaying plant species in vitro. Null models suggest that stochastic processes governed the assembly of biofilm communities of decaying leaves in vitro in the early stages of biofilm formation and were further shaped by niche-associated factors.

Inhibition of Salmonella Enteritidis adhesion and biofilm formation by β-glucosidase B from Microbacterium sp. BG28

SalmonellaEnteritidis is the most commonly reported pathogen for foodborne illness outbreaks in both underdeveloped and developed regions. S. Enteritidis biofilms, which form on various food contact surfaces, are resistant to conventional physical and chemical cleaning and disinfection procedures routinely used in food processing. The aim of this study was to identify novel, industrially applicable enzymes that are active against S. Enteritidis biofilms. We describe the properties and anti-biofilm activity of heterologously expressed β-glucosidase B derived from the environmental strain Microbacterium sp. BG28 (BglB-BG28) collected from gills of bream fish. The enzyme inhibited adhesion and the early stages of biofilm formation in clinical isolates of S. Enteritidis. At a concentration of 200 μg/mL, BglB-BG28 effectively reduced biofilm formation, by decreasing biofilm biomass by 50% and metabolic activity within biofilms by 80%. The enzyme reduced the formation of air-liquid biofilms on various surfaces, including plastic, glass and metal, as observed by fluorescence microscopy. BglB-BG28 inhibited biofilm formation in Escherichia coli, another important food pathogen that also forms cellulose-rich biofilms. Using o-NPG as substrate, the enzyme showed activity at temperatures up to 50 °C and in a pH range between 4 and 8, high tolerance to sodium chloride and glucose, and compatibility with nonionic detergents. Importantly, no toxicity was observed in the model system Caenorhabditis elegans even at an enzyme concentration of 1 mg/mL. These results suggest that the β-glucosidase BglB-BG28 is a promising candidate for the development of a new enzyme-based disinfection protocol that can be used in food processing facilities.

(Invited) Advanced Scanning Probe Microscopy for Studying Biofilm Formation and Single Cell Entities at Electrified Interfaces

Advanced scanning probe microscopy techniques such as atomic force – scanning electrochemical microscopy (AFM-SECM) und scanning electrochemical microscopy (SECM) are highly attractive hybrid techniques for studying biomedically relevant samples down to the single entity level. Our group introduced a new type of AFM-SECM probe having a conductive colloid instead of a sharp AFM tip. As this spherical microelectrode, which is located at the end of an electrically insulated AFM cantilever can be easily modified by electrodeposition with e.g., conductive polymers and electrocatalytic layers, single cell force spectroscopy under potential control allows studying adhesion properties [1,2]. Cell adhesion is a crucial parameter not only for developing new materials serving as substrates for neural scaffolds, electrodes, and biomedical devices but also in biofilm formation. Biofilms are well-organized aggregates of bacteria able to attach to and proliferate at almost every type of solid surface resulting in increased resistance to conventional antimicrobial and antibiofouling agents [3].The first attachment of bacterials is a process highly influenced by the nature of the surface, such as hydrophobicity, chemical structure, surface charge, and presence of antimicrobials [4].In this contribution, we present the potential of various scanning probe microscopy techniques, as suitable tools to locally investigate the early stages of biofilm formation and the effects of various antibiofouling and antimicrobial systems against Escherichia coli and Pseudomonas fluorescens. For example, the properties of polydopamine, a bio-compatible polymer, are studied in respect to early stages of bacterial adhesion in dependence of surface charge density and applied potential [5]. Colloidal conductive AFM probes can also be modified electrocatalytic layers, suitable for detecting signaling molecules and at the same time allow electrochemical force spectroscopy at soft samples like biomedically relevant single entities.

A 3D physical model predicting favorable bacteria adhesion

Predicting the initial steps of bacterial biofilm formation remains a significant challenge accross various fields, such as medical and industrial ones. Here we present a straightforward 3D theoretical model based on thermodynamic rules to assess the early stages of biofilm formation on different material surfaces. This model relying also on morphological aspects of bacteria, we used Atomic Force Microscopy images of two Gram negative bacteria, Pseudomonas fluorescens and Escherichia coli to determine their dimensions and geometries as single cells or in aggregated states. Algorithms developed for our modeling and numerical simulations generated a dataset of energetic minimized states, depending on the substrate. The model was applied to substrates widely used for bacteria immobilization in imaging applications. The results show that the different minimum energy values, depending of the substrate, can be correlated with the bacterial adhesion state, representing a potential tool for evaluating the early stages of biofilm formation on various surfaces.

Effect of plasma-activated water on the biofilm-forming ability of Salmonella enterica serovar Enteritidis and expression of the related genes

In recent years, microbial decontamination with plasma-activated water (PAW) has attracted a lot of research attention in the field of food industry. Despite several studies showing that PAW effectively inactivates planktonic bacteria, few studies have been conducted on biofilms. The present study was, therefore, designed to evaluate the effect of PAW on the biofilm formation characteristics of Salmonella Enteritidis. Comparing the expression patterns of biofilm-related genes in PAW-treated and non-treated planktonic and biofilm cells provided insight into how PAW regulates this process. The results showed that a 30-minute exposure to PAW at room temperature significantly reduced S. enteritidis planktonic cells. This exposure resulted in a decreased expression of the genes involved in the early stages of biofilm formation (csgD, agfA, fimA, lpfE, and rpoS), and an increased expression of the csrA gene in S. enteritidis planktonic cells. These results indicated the inhibitory effect of PAW on the biofilm formation process in S. enteritidis. Results of the initial attachment assay confirmed these findings, where, after 6 h, the number of PAW-treated cells attached to the stainless steel surfaces were significantly lower than non-treated ones. Furthermore, biofilm development assay revealed that the number of PAW-treated biofilm cells were significantly lower than non-treated ones after 24 h incubation at 37 °C. These findings were confirmed by measurements of the major components of biofilm i.e., extracellular DNA (eDNA), protein and carbohydrate. The amount of these components in 24-hour biofilms produced by PAW-treated S. enteritidis cells was significantly lower than that of non-treated cells. PAW's treatment on preformed 24-hour biofilms for 30 min led to a decrease in the expression of genes involved in quorum sensing and cellulose synthesis (csgD, bapA, adrA, luxS and sdiA) and an increase in the expression of the csrA gene. This treatment also reduced the number and metabolic activity of biofilm cells compared to non-treated biofilm cells. In total, the present study demonstrated that PAW has an inhibitory effect on the process of biofilm formation in S. enteritidis and hence, the food industry should pay special attention to PAW as a promising treatment to eliminate bacterial biofilms.

Nondestructive, reagent-free, low-volume fluidic set-up to study biofilms by using a transparent electrode, allowing simultaneous electrochemical and optical measurements.

The aim was to develop an electrochemical/optical set-up and correlate it (as validation) with other chemical and physical methods to obtain a simple and cost-effective system to study biofilm formation. A simple microfluidic cell and methods allowed continuous monitoring of the first, critical steps of microbial attachment. We monitored sulfate-reducing bacteria (SRB) at the early stages of biofilm formation. Herein, we studied the formation and adherence of SRB consortium biofilms over an indium tin oxide (ITO) conducting surface using microbiological and chemical methods, microscopic observations [scanning electron microscopy (SEM) and optical], and electrochemical impedance spectroscopy (EIS) measurements. The SRB biofilm formation was evaluated for 30 d by SEM and EIS. Charge transfer resistance decreased when the microbial population colonized the electrode. The monitoring of early-stage biofilm formation was performed using EIS at a single frequency of 1Hz during the first 36 h. The simultaneous use of optical, analytical, and microbiological methods allowed us to connect the kinetics of the growth of the microbial consortium to the values obtained via the electrochemical technique. The simple setup we present here can help laboratories with limited resources to study biofilm attachment and facilitates the development of various strategies to control biofilm development in order to avoid damage to metallic structures (microbiologically influenced corrosion, MIC) or the colonization of other industrial structures and medical devices.

Resolving a Natural Product Cold Case: Elucidation of Fusapyrone Structure and Absolute Configuration and Demonstration of Their Fungal Biofilm Disrupting Properties.

Fusapyrones are fungal metabolites, which have been reported to have broad-spectrum antibacterial and antifungal properties. Despite the first members of this chemical class being described three decades prior, many aspects of their structures have remained unresolved, thereby constraining efforts to fully understand structure-activity relationships within this metabolite family and impeding the design of streamlined syntheses. Among the main challenges posed by fusapyrones is the incorporation of several single and groups of stereocenters separated by atoms with freely rotating bonds, which have proven unyielding to spectroscopic analyses. In this study, we obtained a series of new (2-5 and 7-9) and previously reported fusapyrones (1 and 6), which were subjected to a combination of spectroscopic, chemical, and computational techniques enabling us to offer proposals for their full structures, as well as provide a pathway to reinterpreting the absolute configurations of other published fusapyrone metabolites. Biological testing of the fusapyrones revealed their abilities to inhibit and disrupt biofilms made by the human fungal pathogen, Candida albicans. These results show that fusapyrones reduce hyphae formation in C. albicans, as well as decrease the surface adherence capabilities of planktonic cells and cells transitioning into early-stage biofilm formation.

Upregulation of ica Operon Governs Biofilm Formation by a Coagulase-Negative Staphylococcus caprae.

Staphylococcus caprae is a Gram-positive, coagulase-negative staphylococci (CoNS), which appears as commensal in the skin, as well as a prevalent mastitis pathogen of goats. Occasionally, it is also associated with infections in humans. Biofilm formation has been identified as a putative virulence factor in S. caprae. Biofilms are multicellular communities protected by a self-produced extracellular matrix (ECM), which facilitates the resistance of bacterial cells to antimicrobial treatments. The ECM is constructed by exopolysaccharides, including the major exopolysaccharide-polysaccharide intercellular adhesion (PIA), regulated by the ica operon in Staphylococcus species. The aim of this study was to characterize the expression of the ica operon in relation to biofilm formation in S. caprae. Results showed that within a few hours of growth, S. caprae could adhere to polystyrene surfaces, start to accumulate, and form biofilm. Peak biofilm biomass and maturation were reached after 48 h, followed by a reduction in biomass after 72 h. Confocal laser scanning microscopy showed the expression of matrix-associated proteins and polysaccharides at various time points. The expression dynamics of the ica operon were investigated using real-time reverse transcriptase PCR (RT)-qPCR, which showed elevated expression during the early stages of biofilm formation and subsequent downregulation throughout the biofilm aging process. In conclusion, our results show that the ica operon is essential in regulating biofilm formation in S. caprae, similar to other Staphylococcus species. Furthermore, the robustness of the observed biofilm phenotype could account for the successful intramammary colonization and may explain disease persistence caused by this pathogenic bacterium.

Ship Hull-Fouling Diatoms on Korean Research Vessels Revealed by Morphological and Molecular Methods, and Their Environmental Implications.

Ship biofouling is one of the main vectors for the introduction and global spread of non-indigenous organisms. Diatoms were the early colonizers of ship hulls; however, their community composition on ships is poorly understood. Herein, we investigated the diatom community on the hull samples collected from two Korean research vessels Isabu (IRV) and Onnuri (ORV) on September 2 and November 10, 2021, respectively. IRV showed low cell density (345cells/cm2) compared to ORV (778cells/cm2). We morphologically identified more than 15 species of diatoms from the two research vessels (RVs). The microalgae in both RVs were identified as Amphora, Cymbella, Caloneis, Halamphora, Navicula, Nitzschia, and Plagiogramma. Of them, the genus Halamphora was found to be predominant. However, both RVs had a varied dominant species with a significant difference in body size; Halamphora oceanica dominated at IRV, and Halamphora sp. at ORV, respectively. Molecular cloning showed similar results to morphological analysis, in which Halamphora species dominated in both RVs. The hull-attached species were distinct from species found in the water column. These results revealed diatoms communities that are associated with ship hull-fouling at an early stage of biofilm formation. Moreover, ships arriving from different regions could show some variation in species composition on their hull surfaces, with the potential for non-indigenous species introduction.

Nanoparticle-Based Photodynamic Inhibition of Candida albicans Biofilms with Interfering Quorum Sensing.

Biofilm formation is a critical event in the pathogenesis and virulence of fungal infections caused by Candida albicans, giving rise to about a 1000-fold increase in the resistance to antifungal agents. Although photodynamic treatment (PDT) has been excellently implicated in bacterial infections, studies on its potential against fungal infection through the clearance of fungal biofilm formation remain at its infancy stage. Here, we have designed photodynamic nanoparticles with different sizes, modifications, and the ability of generating reactive oxygen species (ROS) to examine their effects on inhibiting biofilm formation and destructing mature biofilms of C. albicans. We found that the nanoparticles modified with oligo-chitosan exhibited a better binding efficiency for planktonic cells, leading to stronger inhibitory efficacy of the filamentation and the early-stage biofilm formation. However, for mature biofilms, the nanoparticles with the smallest size (∼15 nm) showed the fastest penetration speed and a pronounced destructing effect albeit conferring the lowest ROS-producing capability. The inhibitory effect of photodynamic nanoparticles was dependent on the disruption of fungal quorum sensing (QS) by the upregulation of QS molecules, farnesol and tyrosol, mediated through the upregulation of ARO 8 and DPP 3 expression. Our findings provide a powerful strategy of nanoparticulate PDT to combat fungal infections through the inhibition of both hyphal and biofilm formation by disrupting QS.

Density and temperature controlled fluid extraction in a bacterial biofilm is determined by poly-γ-glutamic acid production

A hallmark of microbial biofilms is the self-production of an extracellular molecular matrix that encases the resident cells. The matrix provides protection from the environment, while spatial heterogeneity of gene expression influences the structural morphology and colony spreading dynamics. Bacillus subtilis is a model bacterial system used to uncover the regulatory pathways and key building blocks required for biofilm growth and development. In this work, we report on the emergence of a highly active population of bacteria during the early stages of biofilm formation, facilitated by the extraction of fluid from the underlying agar substrate. We trace the origin of this fluid extraction to the production of poly-γ-glutamic acid (PGA). The flagella-dependent activity develops behind a moving front of fluid that propagates from the boundary of the biofilm towards the interior. The extent of fluid proliferation is controlled by the presence of extracellular polysaccharides (EPS). We also find that PGA production is positively correlated with higher temperatures, resulting in high-temperature mature biofilm morphologies that are distinct from the rugose colony biofilm architecture typically associated with B. subtilis. Although previous reports have suggested that PGA production does not play a major role in biofilm morphology in the undomesticated isolate NCIB 3610, our results suggest that this strain produces distinct biofilm matrices in response to environmental conditions.

Effect of hydrodynamics on the transformation of nitrogen in river water by regulating the mass transfer performance of dissolved oxygen in biofilm

Biofilms drive crucial ecosystem processes in rivers. This study provided the basis for overall quantitative calculations about the contribution of biofilms to the nitrogen cycle. At the early stage of biofilm formation, dissolved oxygen (DO) could penetrate the biofilms. As the biofilm grew and the thickness increased, then the mass transfer of DO was restricted. The microaerobic layer firstly appeared in biofilm under the turbulent flow conditions, with the appearance of the microaerobic and anaerobic layer, the nitrification and denitrification reaction could proceed smoothly in biofilm. And the removal efficiency of total nitrogen (TN) increased as the biofilm matured. Under the turbulent flow conditions, mature biofilms had the smallest thickness, but the highest proportion the anaerobic layer to the biofilm thickness, the highest density, and the highest nitrogen removal efficiency. However, the nitrogen removal efficiency of biofilm was the lowest under laminar flow conditions. The difference of layered structure of biofilm and the DO flux in biofilm explained the difference of nitrogen migration and transformation in river water under different hydrodynamic conditions. This study would help control the growth of biofilm and improve the nitrogen removal capacity of biofilm by regulating hydrodynamic conditions.

Early stage biofilm formation on bio-based microplastics in a freshwater reservoir

Bio-based plastics (BP) produced from renewable biomass resources, such as high-density polyethylene (HDPE), polylactic acid (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), is currently increasing in terms of both products and applications. However, their biodegradability and environmental fate are not yet fully understood, especially in freshwaters. Here, we present the results of an in-situ study in a freshwater reservoir, where we submerged HDPE, PLA and PHBV microscale BP (mBP) in dialysis bags to enable exchange of small organic and inorganic molecules, including nutrients, with the surrounding water. After one and two months, the bacterial biofilm that formed on each mBP was characterised by 16S rRNA amplicon sequencing. After two-months, Oxalobacteraceae, Pedosphaeraceae, Flavobacteriaceae (Flavobacterium) and Chitinophagaceae (Ferruginibacter) had increased by up to four times. Both these and other common members (≥1 % relative total biomass) of the microbial community were similarly abundant on all mBP. Low-abundance (0.3–1 %) bacterial taxa, however, were significantly more diverse and differed on each mBP. Notably, some low-abundance families and genera increased on specific materials, e.g. Sphingomonadaceae on HDPE, Sphingobacteriaceae on PHBV, Gemmatimonas and Crenothrix on PLA. Overall, abundant bacteria were regarded as a pioneering community, while low-abundance bacteria were more diverse and preferred mBP types in the early stages of biofilm formation on mBP. It could be influenced by the environmental conditions, where nutrient levels and low temperatures might shape the low-abundance of attached bacterial communities than the plastic material itself.

Bacterial Attachment and Biofilm Formation on Antimicrobial Sealants and Stainless Steel Surfaces.

Biofilms are highly resistant to external forces, especially chemicals. Hence, alternative control strategies, like antimicrobial substances, are forced. Antimicrobial surfaces can inhibit and reduce microbial adhesion to surfaces, preventing biofilm formation. Thus, this research aimed to investigate the bacterial attachment and biofilm formation on different sealants and stainless steel (SS) surfaces with or without antimicrobials on two Gram-positive biofilm forming bacterial strains. Antimicrobial surfaces were either incorporated or coated with anti-microbial, -fungal or/and bactericidal agents. Attachment (after 3 h) and early-stage biofilm formation (after 48 h) of Staphylococcus capitis (S. capitis) and Microbacterium lacticum (M. lacticum) onto different surfaces were assessed using the plate count method. In general, bacterial adhesion on sealants was lower compared to adhesion on SS, for surfaces with and without antimicrobials. Antimicrobial coatings on SS surfaces played a role in reducing early-stage biofilm formation for S. capitis, however, no effects were observed for M. lacticum. S. capitis adhesion and biofilm formation were reduced by 8% and 25%, respectively, on SS coated with an antimicrobial substance (SS_4_M), compared to the same surface without the antimicrobial coating (SS_4_control). Incorporation of both antifungicidal and bactericidal agents (S_5_FB) significantly reduced (p ≤ 0.05) early-stage biofilm formation of M. lacticum, compared to the other sealants incoportating either solely antifungal agents (S_2_F) or no active compound (S_control). Furthermore, the thickness of the coating layer correlated weakly with the antimicrobial effect. Hence, equipment manufacturers and food producers should carefully select antimicrobial surfaces as their effects on bacterial adhesion and early-stage biofilm formation depend on the active agent and bacterial species.

Surface modification of poly(methyl-methacrylate) with farnesol to prevent Candida biofilm formation.

Candida albicans promotes biofilm formation on dentures, which compromises the use of poly(methyl-methacrylate) (PMMA) as a dental material. Farnesol (FAR), a natural compound that prevents C. albicans filamentation and biofilm formation, was incorporated into the PMMA matrix, to obtain antifungal PMMA_FAR materials. The tested concentrations (0·0125% and 0·4%) of FAR, 24 h after incubation on YPD agar, inhibited filamentation of C. albicans. PMMA was modified with different FAR concentrations (3-12%), and physicochemical properties, antifungal activity and cytotoxicity of these modified materials (PMMA_FAR) were tested. The presence of FAR in PMMA_FAR composites was verified by Fourier-transform infrared spectroscopy (FT-IR). Incorporation of FAR into the polymeric matrix significantly decreased hydrophilicity at all tested concentrations and significantly reduced biofilm and planktonic cells metabolic activity in the early stage of biofilm formation at ≥6% FAR in PMMA. PMMA_FAR composites with <9% FAR were non-toxic. Modification of PMMA with FAR is a good strategy for reducing C. albicans biofilm formation on dentures.

An adaptive tracking illumination system for optogenetic control of single bacterial cells.

Single-cell behaviors are essential during early-stage biofilm formation. In this study, we aimed to evaluate whether single-cell behaviors could be precisely and continuously manipulated by optogenetics. We thus established adaptive tracking illumination (ATI), a novel illumination method to precisely manipulate the gene expression and bacterial behavior of Pseudomonas aeruginosa on the surface at the single-cell level by using the combination of a high-throughput bacterial tracking algorithm, optogenetic manipulation, and adaptive microscopy. ATI enables precise gene expression control by manipulating the optogenetic module gene expression and type IV pili (TFP)-mediated motility and microcolony formation during biofilm formation through bis-(3'-5')-cyclic dimeric guanosine monophosphate (c-di-GMP) level modifications in single cells. Moreover, we showed that the spatial organization of single cells in mature biofilms could be controlled using ATI. Therefore, this novel method we established might markedly answer various questions or resolve problems in microbiology. KEY POINTS: • High-resolution spatial and continuous optogenetic control of individual bacteria. • Phenotype-specific optogenetic control of individual bacteria. • Capacity to control biologically relevant processes in engineered single cells.

Modulation of sensitivity to gaseous signaling by sterol-regulatory hypoxic transcription factors in Aspergillus nidulans biofilm cells

Fungal biofilm founder cells experience self-generated hypoxia leading to dramatic changes in their cell biology. For example, during Aspergillus nidulans biofilm formation microtubule (MT) disassembly is triggered causing dispersal of EB1 from MT tips. This process is dependent on SrbA, a sterol regulatory element-binding transcription factor required for adaptation to hypoxia. We show that SrbA, an ER resident protein prior to activation, is proteolytically activated during early stages of biofilm formation and that, like SrbA itself, its activating proteases are also required for normal biofilm MT disassembly. In addition to SrbA, the AtrR transcription factor is also found to be required to modulate cellular responses to gaseous signaling during biofilm development. Using co-cultures, we further show that cells lacking srbA or atrR are capable of responding to biofilm generated gaseous microenvironments but are actually more sensitive to this signal than wild type cells. SrbA is a regulator of ergosterol biosynthetic genes and we find that the levels of seven GFP-tagged Erg proteins differentially accumulate during biofilm formation with various dependencies on SrbA for their accumulation. This uncovers a complex pattern of regulation with biofilm accumulation of only some Erg proteins being dependent on SrbA with others accumulating to higher levels in its absence. Because different membrane sterols are known to influence cell permeability to gaseous molecules, including oxygen, we propose that differential regulation of ergosterol biosynthetic proteins by SrbA potentially calibrates the cell’s responsiveness to gaseous signaling which in turn modifies the cell biology of developing biofilm cells.