Dynamic Light Scattering Methods Research Articles

Physicochemical Properties of Cetrimonium Bromide in Electrolytes and Nonelectrolyte Environments

Background: The physicochemical properties, including the thermodynamics of micellization studies, received much attention. Cationic surfactant cetrimonium bromide (C16TABr) in electrolytes (sodium chloride and sodium salicylate) and nonelectrolyte (Ethylene glycol) in an aqueous solution were examined, and interesting results were obtained. The present investigation aims to identify a suitable combination of cationic surfactant cetrimonium bromide + electrolytes and nonelectrolytes having the ability to alter the size or shape of the micellar system using available methods. Methods: Surface tension, conductivity, viscosity, ultrasonic velocity, and dynamic light scattering (DLS) methods at different temperatures (303-323K) were used during the experimental research work. Results: The experimental results pointed out that the incorporation of electrolytes and nonelectrolyte into the cationic surfactant affects the physicochemical properties such as critical micelle concentration (CMC), surface tension (ST), degree of ionization (α), degree of counterion binding (β), standard Gibbs free energy of micellization (ΔGo m), standard entropy of micellization (ΔSo m), standard heat of micellization (ΔHo m), viscosities, and acoustic parameters. Dynamic light scattering (DLS) measurements reveal exciting facts related to the size and shape transformation of the mixed micellar assembly. Structure modification can be obtained by choosing right the combination of cationic surfactant cetrimonium bromide + electrolytes (sodium chloride and sodium salicylate) and nonelectrolyte (Ethylene glycol) ratio. Conclusion: It concluded that, over a threshold level, an electrolyte such as NaCl concentration causes the micelle size to rise. The entropy of micellization goes down when a structure-breaker (EG) is added to the water phase, and this is because the structure of the water is changed near hydrophobic groups. The physicochemical features of cetrimonium bromide (C16TABr) show unique behaviour under the influence of micelle-driven and micelle- forbidden systems.

Improved Characterization of Aqueous Single-Walled Carbon Nanotube Dispersions Using Dynamic Light Scattering and Analytical Centrifuge Methods.

Aqueous dispersions of single-walled carbon nanotubes (SWCNTs) with a surfactant were studied by using a combination of differential sedimentation and dynamic light scattering methods. When applied to elongated particles like SWCNTs, the differential sedimentation method makes it possible to measure their diameters in dispersions, while the dynamic light scattering method allows to measure their lengths. Both methods have logarithmic dependence on the ratio between the length and diameter of the particles, and their simultaneous use improves the accuracy of measuring particles' dimensions. It was shown that sonication of dispersions leads not only to unbundling of agglomerates into individual nanotubes but also to a decrease in their lengths and the appearance of new defects detectable in increasing the D/G ratio in the Raman spectra. Unbundling into individual nanotubes occurs after exposure to 1 kWh/L energy density, and the single nanotube diameter with SDBS is ca. 3.3 nm larger than that of the naked nanotubes. Conductivity of thin SWCNT films made out of individual nanotubes demonstrates a power law dependence with the exponent close to the theoretical one for rigid rods.

Two Convenient Methods for Detection of Non-Dairy Fats in Butter by Dynamic Light Scattering and Luminescence Spectroscopy

We propose two convenient methods to quickly detect the presence of non-milk fat (palm oil) in butter, as well as to determine its amount in the product. For the first time, we have experimentally obtained the dependence of the size of drops of an alcoholic emulsion of oil or spread on the content of palm oil in it by the dynamic light scattering (DLS) method. We have also obtained the dependence of intensity ratio of the components of spread luminescence spectrum on palm oil content when excited at a wavelength λ = 266 nm. These results allowed us to propose two methods for determining the adulteration of butter with palm oil using DLS and measuring luminescence spectra. The two methods are physically independent but successfully supplement each other. DLS and luminescent methods for determining the proportion of palm oil give errors of no more than 10% and 6%, respectively.

The effect of novel tyrosine-modified polyethyleneimines on human albumin structure – Thermodynamic and spectroscopic study

The interaction of proteins with nanoparticle components are crucial for the evaluation of nanoparticle function, toxicity and biodistribution. Polyethyleneimines (PEIs) with defined tyrosine modifications are a class of novel polymers designed for improved siRNA delivery. Their interactions with biomacromolecules are still poorly described. This paper analyzes the interaction of different tyrosine-modified PEIs with human serum albumin as the most abundant serum protein. The ability of tyrosine modified, linear or branched PEIs to bind human serum albumin (HSA) was analyzed and further characterized. The interaction with hydrophobic parts of protein were studied using 1- nilinonaphthalene-8-sulfonic acid (ANS) and changes in the HSA secondary structure were evaluated using circular dichroism (CD). Complex formation and sizes were studied by transmission electron microscopy (TEM) and dynamic light scattering methods (DLS). We demonstrate that tyrosine modified PEIs are able to bind human serum albumin. Based on thermodynamic studies, van der Waals interaction, H-bonding and hydrophobic interactions are determined as main molecular forces involved in complex formation. Analysis of secondary structures revealed that the polymers decreased α-helix content, while increasing levels of randomly folded structures. Complex formation was confirmed by TEM and DLS. These findings are crucial for understanding polymer-protein interactions and the properties of nanoparticles.

Multiple-Stimuli-Responsive Surfactant-Free Microemulsions Based on Hydrophobic Deep Eutectic Solvents.

Hydrophobic deep eutectic solvents (HDESs) have been applied to colloidal systems such as microemulsions, despite the development of stimulus-responsive HDESs still being in a preliminary stage. Here, menthol and indole were hydrogen bonded to form CO2-responsiveness HDES. A surfactant-free microemulsion constituted of HDES (menthol-indole) as the hydrophobic phase, water as the hydrophilic phase, and ethanol as the double solvent was demonstrated to be CO2- and temperature-responsive. Dynamic light scattering (DLS) proved the single-phase region of the phase diagram, while conductivity and polarity probing techniques confirmed the kind of microemulsion. The ternary phase diagram and DLS methods were used to investigate the responsiveness of CO2 and effect temperature on the microemulsion drop size and behavior of the phase of the HDES/water/ethanol microemulsion. The findings revealed that when temperature increased, the homogeneous phase region increased. The droplet size in the homogeneous phase region of the associated microemulsion may be reversibly and accurately adjusted by adjusting the temperature. Surprisingly, a slight temperature change can cause a significant phase inversion. Furthermore, in the system, there was no demulsification in time for the CO2/N2 responsiveness process but rather the production of a homogeneous and pellucid aqueous solution.

Doxorubicin- and Trastuzumab-Modified Gold Nanoparticles as Potential Multimodal Agents for Targeted Therapy of HER2+ Cancers.

Recently, targeted nanoparticles (NPs) have attracted much attention in cancer treatment due to their high potential as carriers for drug delivery. In this article, we present a novel bioconjugate (DOX-AuNPs-Tmab) consisting of gold nanoparticles (AuNPs, 30 nm) attached to chemotherapeutic agent doxorubicin (DOX) and a monoclonal antibody, trastuzumab (Tmab), which exhibited specific binding to HER2 receptors. The size and shape of synthesized AuNPs, as well as their surface modification, were analyzed by the TEM (transmission electron microscopy) and DLS (dynamic light scattering) methods. Biological studies were performed on the SKOV-3 cell line (HER2+) and showed high specificity of binding to the receptors and internalization capabilities, whereas MDA-MB-231 cells (HER2-) did not. Cytotoxicity experiments revealed a decrease in the metabolic activity of cancer cells and surface area reduction of spheroids treated with DOX-AuNPs-Tmab. The bioconjugate induced mainly cell cycle G2/M-phase arrest and late apoptosis. Our results suggest that DOX-AuNPs-Tmab has great potential for targeted therapy of HER2-positive tumors.

The structure and dynamics of bottlebrushes: Simulation and experimental studies combined

Bottlebrushes are complex macromolecular structures composed of polymer chains densely tethered to another polymer chain via a stable covalent bond linkage. Although numerous experimental techniques have been successfully applied for the characterization of bottlebrush polymers, some parameters still cannot be determined. Herein new simulation method using a dedicated machine was used to confront its applicability for complex macromolecules simulations. The bottlebrushes were synthesized by atom transfer radical polymerization (ATRP) with varied degree of polymerization (N) of the side chains, poly(methyl methacrylate) (PMMA). Poly(2-(2-bromoisobutyryloxy)ethyl methacrylate) (PBiBEM) was used as macroinitiator with a degree of polymerization Nbb = 102. Degree of polymerization of side chains (Nsc) changed from 28 to 113. The bottlebrushes were characterized by Gel Permeation Chromatography – Multiangle Laser Light Scattering (GPC-MALLS), Pulsed-field Gradient Spin Echo Nuclear Magnetic Resonance (PGSE NMR), and combined Static and Dynamic Light Scattering methods (SLS-DLS). A novel calculation strategy via the Monte Carlo-class Dynamic Lattice Liquid (DLL) algorithm executed on a dedicated machine ARUZ was applied for theoretical studies. The experimental values concerning the scaling behavior of polymer size and dynamics were compared and confronted with simulation results.

Beyond microplastics - investigation on health impacts of submicron and nanoplastic particles after oral uptake in vitro

The continuously increasing use of plastics is supposed to result in a rising exposure of MNPs to humans. Available data on human health risks of microplastics after oral uptake increased immensely in the past years and indicates very likely only low risks after oral consumption. Concerning nanoplastics, uptake, transport and potential adverse effects after oral uptake are less well understood. This study aims to investigate differences between microplastic particles and particles in the submicron- and nanoscaled size derived from food-relevant polymers with a particle size range consistent with higher potential for cellular uptake, fate, and effects when applied to human intestinal and liver cells. This work includes the development of cellular and subcellular detection methods for synthetic polymeric particles in the micro- and nanometer-range, using Scanning Electron Microscopy, Small-Angle X-ray and Dynamic Light Scattering methods, Asymmetric Flow Field Flow Fractionation, octanol-water fractionation, fluorescence microscopy and flow cytometry. Polylactic acid (250 nm and 2 μm (polydisperse)), melamine formaldehyde (366 nm) and polymethylmethacrylate (25 nm) were thoroughly characterized. The submicro- and nanoplastic test particles showed an increased uptake and transport quantity through intestinal cells. Both types of particles resulted in observed differences of uptake behavior, most likely influenced by different lipophilicity, which varied between the polymeric test materials. Toxic effects were detected after 24 h only in overload situations for the particles in the submicrometer range. This study provides further evidence for gastrointestinal uptake of submicro- and nanoplastics and points towards differences regarding bioavailability between microplastics and smaller plastic particles that may result following the ingestion of contaminated food and beverages. Furthermore, the results reinforce the importance for studying nanoplastics of different materials of varying size, surface properties, polymer composition and hydrophobicity.

Facile synthesis of rod-like α-FeOOH nanoparticles adsorbent and its mechanism of sorption of Pb(II) and indigo carmine in batch operation

• Nanoparticles of α-FeOOH was synthesized and characterized using XRD, FTIR, SEM, TEM and DLS methods. • The Rod-like α-FeOOH Nanoparticles was used for removal of Pb(II) and Indigo carmine from aqueous solution in batch adsorption mode. • The optimum adsorption of Pb(II) occurred at pH 10 in 180 min agitation with initial concentration of 800 mg/L. • The optimum adsorption of indigo carmine occurred at pH 4 in 150 min agitation with initial concentration of 50 mg/L. • The adsorption capacity of α-FeOOH Nanoparticles for Pb(II) was 287.98 mg/g while indigo carmine was 18.99 mg/g. • Pseudo-second order kinetics and intraparticle diffusin models fitted best and the adsorption processes were spontaneous and endothermic in nature. Nanoparticles (NPs) of α-FeOOH were synthesized by hydrothermal assisted method. X-Ray Diffraction (XRD) result showed that single-crystalline orthorhombic α-FeOOH was formed, Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) images showed that the synthesized α-FeOOH nanoparticles were rod-like in shape, while Dynamic Light Scattering (DLS) study gave average nanoparticles sizes of 58.24 nm. The mechanism of batch adsorption of Pb(II) and IDC onto α-FeOOH NPs adsorbent were studied at various conditions of solution pH, concentration, adsorbent dose, temperature and time of agitation. The optimum adsorption capacity of Pb(II) and IDC at pH 10 and 4 were estimated as 287.98 and 18.99 mg/g at 313 and 318 K respectively. The Langmuir isotherm model fitted well with regression coefficient, R 2 = 0.9898 and 0.9966 for Pb(II) and IDC respectively. The pseudo-second-order kinetics best described the sorption processes of Pb(II) and IDC respectively, with R 2 = 0.9974 and 0.9861. However, intraparticle diffusion and pore filling mechanism were found to control the adsorption rates. The change in Gibbs free energy (ΔG°) obtained were negative indicating spontaneous adsorption processes, while positive values of ΔH (+107.08 and +102.15 KJ/mol) and ΔS (+0.361 and +0.341 KJ/mol) for Pb(II) and IDC respectively, showed endothermic and randomness at the NPs of α-FeOOH-aqueous interface during the adsorption processes. The activation energy, E a , were found to be +3.307 and +6.552 KJ/mol for adsorption of Pb(II) and IDC respectively, showing that adsorption onto α-FeOOH NPs adsorbent were physical processes with external diffusion as the rate determining step.

Co(III)-tetra(4-sulfonatophenyl)porphyrin complexes with bidentate ligands in aqueous buffer media

The processes of hydrophilic Co(III)-tetra(4-sulfonatophenyl)porphyrin supramolecular assembly with 4,4-bipyridyl in aqueous buffer media have been studied by UV-vis, 1D and 2D 1H NMR-spectroscopy. In the case of 1,4-diazabicyclo[2.2.2]octane, pyrazine and piperazine in aqueous solutions, no assembly was observed. Interactions of the hydrophilic Co(III)-tetraarylporphyrin with ionic micelles (cationic surfactants with different alkyl tail lengths) in buffer media were investigated. These studies were performed by the UV-vis, 1D NOESY-spectroscopy and dynamic lightscattering (DLS) methods. The metalloporphyrins were incorporated into the hydrophobic part of micelles, which led to Co(III) reduction to Co(II) in the Co-porphyrinate composition. The rate of Co(III) reduction accompanied by detachment of additional ligands coordinated on Co(III)-porphyrins or disruption of supramolecular dimers and depends on the surfactant concentration and nature. The results obtained indicate the possibility of creating supramolecular porphyrin-based assemblies with the preprogrammed lifetime (from several hours to several days) and could be used in the creation of host-guest systems for recognition, selective binding and the prolonged release of bioactive substrates as the means in the designing of biomimetic systems with effective binding affinities to heterocycles, DNA base pairs and RNA.

Development of Chitosan-Assisted Fe3O4@SiO2 Magnetic Nanostructures Functionalized with Nisin as a Topical Combating System against Vancomycin-Intermediate Staphylococcus aureus (VISA) Skin Wound Infection in Mice

The clinical significance of vancomycin-intermediate S. aureus (VISA) infections is intensified by its tendency to develop resistance to antimicrobials and persistent infections. The decreasing effectiveness of the antimicrobials available is now seriously compromised; thus, there is an emergent need to invent new classes of antimicrobial agents that can rapidly and efficiently eradicate infections. Fe3O4@SiO2@chitosan (CS) nanocomposites were successfully synthesized and then decorated with nisin to gain Fe3O4/SiO2/CS/nisin-based magnetic nanostructures (Fe3O4@SiO2@CS-NISIN). The nanomaterials were characterized comparatively via FTIR (Fourier transform infrared spectroscopy), XRD (X-ray diffraction), FE-SEM (field emission scanning electron microscopes), DLS (dynamic light scattering), and VSM (vibrating sample magnetometer) methods. The methyl thiazol tetrazolium (MTT) assay was performed to determine the inhibitory effects of antibacterial agents on the cell viability. The in vitro bactericidal effect of all compounds was characterized using the microdilution assay. Finally, the topical antibacterial efficacy of free nisin, Fe3O4@SiO2@CS, and Fe3O4@SiO2@CS-NISIN nanocomposites against murine superficial wound infection models was determined. The functionalized nanocomposites were more efficient in suppressing bacterial growth in vitro and in vivo compared to the same quantities of untargeted nanocomposites. MTT results showed acceptable biocompatibility of all nanoformulations, and no substantial difference in the cell viability was recorded between treated cells and untreated control. These results suggest that Fe3O4@SiO2@CS-NISIN nanocomposites can be served as an alternative antimicrobial agent in innovative and emerging technologies to treat a variety of staphylococcal infections.

Supramolecular assembly of hydrophilic Co(III)-porphyrin with bidentate ligands in aqueous buffer media

The processes of hydrophilic Co(III)-tetra(4-sulfonatophenyl)porphyrin supramolecular assembly with 4,4-bipyridyl in aqueous buffer media have been studied by UV–vis, 1D and 2D 1H NMR-spectroscopy. In the case of 1,4-diazabicyclo[2.2.2]octane, pyrazine and piperazine in aqueous solutions, no assembly was observed. Interactions of the hydrophilic Co(III)-tetraarylporphyrin with ionic micelles (cationic surfactants with different alkyl tail lengths) in buffer media were investigated. These studies were performed by the UV–vis, 1D NOESY-spectroscopy and dynamic lightscattering (DLS) methods. The metalloporphyrins were incorporated into the hydrophobic part of micelles, which led to Co(III) reduction to Co(II) in the Co-porphyrinate composition. The rate of Co(III) reduction accompanied by detachment of additional ligands coordinated on Co(III)-porphyrins or disruption of supramolecular dimers and depends on the surfactant concentration and nature. The results obtained indicate the possibility of creating of supramolecular porphyrin-based assembles with the preprogrammed lifetime (from several hours to several days) and could be used in the creation of host–guest systems for recognition, selective binding and prolonged release of bioactive substrates as the means in the designing of biomimetic systems with effective binding affinities to heterocycles, DNA base pairs and RNA.

The Effect of Submicron Polystyrene on the Electrokinetic Potential of Cell Membranes of Red Blood Cells and Platelets.

In recent years, many scientists have studied the effects of polymer micro- and nanostructures on living organisms. As it turns out, plastic can be a component of the blood of livestock, eaten by humans around the globe. Thus, it seems important to investigate possible changes in the physicochemical parameters and morphology of the cell membranes of blood morphotic elements (red blood cells and platelets) under the influence of polymer particles. The article presents research in which cell membranes were exposed to plain polystyrene (PS) and amino-functionalized polystyrene (PS-NH2) of two different sizes. The polymers were characterized by infrared spectroscopy and dynamic light-scattering methods. To analyze possible changes caused by polymer exposure in the structure of the membranes, their zeta potentials were measured using the electrophoretic light-scattering technique. The concentration of the polymers, as well as the exposure time, were also taken into the consideration during the research. Based on the obtained results, we concluded that 100 and 200 nm PS, as well as 100 nm PS-NH2, internalize into the cells. On the contrary, 200 nm PS-NH2 particles attach to cell membranes. Our study clearly shows that particle size and surface chemistry determine the interaction with biological membranes.

Temperature and pH-Dependent Behaviors of mAb Drugs: A Case Study for Trastuzumab

The distortions in the high-order structure of therapeutic monoclonal antibodies (mAbs) under different environmental conditions acutely affect mAb stability, resulting in altered safety, efficacy, and shelf-life profiles. The overall stability of mAbs depends on many factors, and it requires complementary techniques for an in-depth analysis. The stability of mAbs can be characterized by differential centrifugal sedimentation (DCS), differential scanning calorimetry (DSC), differential scanning fluorimetry (DSF), and size exclusion chromatography (SEC) techniques. In this report, temperature-ramped dynamic light scattering (DLS), and circular dichroism (CD) spectroscopy were employed as complementary tools to show how temperature and pH affect the aggregation of a model mAb, trastuzumab, in solution. The results showed that the aggregation onset temperature of trastuzumab defined by DLS was 75 °C, which decreases the amount of β-sheets and causes a slight increase in helix structures. Moreover, the melting temperature of trastuzumab was determined to be between 80–83 °C by temperature-ramped CD spectrophotometry, which is in line with the Tm of trastuzumab’s Fab region tested with DSC. Thus, unfolding and aggregation of trastuzumab start simultaneously at 75 °C, and unfolding triggers the aggregation. The temperature-ramped CD and DLS methods are robust tools to determine the thermal behavior of biosimilars in various solution conditions. Their complementary usage provides solid scientific background for regulatory applications and a better understanding of mAb instability and its relationship with structural changes.

Development of Submicrocapsules Based on Co-Assembled Like-Charged Silica Nanoparticles and Detonation Nanodiamonds and Polyelectrolyte Layers.

Capsules with shells based on nanoparticles of different nature co-assembled at the interface of liquid phases of emulsion are promising carriers of lipophilic drugs. To obtain such capsules, theoretically using the Derjaguin–Landau–Verwey–Overbeek (DLVO) theory and experimentally using dynamic light-scattering (DLS) and transmission electron microscopy (TEM) methods, the interaction of like-charged silica nanoparticles and detonation nanodiamonds in an aqueous solution was studied and their ratios selected for the formation of submicron-sized colloidosomes. The resulting colloidosomes were modified with additional layers of nanoparticles and polyelectrolytes, applying LbL technology. As a model anti-cancer drug, thymoquinone was loaded into the developed capsules, demonstrating a significant delay of the release as a result of colloidosome surface modification. Fluorescence flow cytometry and confocal laser scanning microscopy showed efficient internalization of the capsules by MCF7 cancer cells. The obtained results demonstrated a high potential for nanomedicine application in the field of the drug-delivery system development.

Versatile Diblock Polyampholytes Can Form Two Types of Charged and Internally Structured Core-Shell Particles by Complexation with Cationic or Anionic Surfactants.

We used diblock poly(acrylic acid)-b-poly(2-dimethylamino ethyl methacrylate) (PAA-b-PDMAEMA) polyampholytes to prepare core-shell complexes with ionic surfactants. The dispersions have been characterized by means of small-angle X-ray scattering (SAXS), cryogenic transmission electron microscopy (Cryo-TEM), dynamic light-scattering, and zeta potential methods. Using cationic or anionic surfactants it is possible to produce particles with either positively or negatively charged shells, both having an internal liquid-crystalline core structure. For the different systems, different preparation protocols were found to be successful to produce stable and reproducible particles. The particle morphologies depend on the surfactant used. Complexes with the cationic surfactant hexadecyltrimethylammonium (CTA+) form oblate particles, while complexes with dodecyl sulfate (DS-) form cylindrical rods. In both complexes, the smallest dimension of the core does not exceed twice the block length of the core-forming polymer block. For the particles with CTA+, nonelectrostatic attractive interactions among the PDMAEMA chains in the shells seem to be present, affecting the particle shape. In both types of particles, the surfactant in the core forms rod-like aggregates, arranged in a two-dimensional hexagonal structure with the surfactant rods aligned with the axis of rotational symmetry in the particle. With charged polymer chains in the shell, the aggregates present a striking stability over time, displaying no change in particle size over the time scale investigated (10 months). Nevertheless, the aggregates are highly dynamic in nature, and their shapes and structures can be changed dramatically in dispersion, without intermediate precipitation, by changes in the composition of the medium. Specifically, a transition from aggregates with cationic surfactant to aggregates with anionic surfactant can be achieved.

Auxiliary mechanism of in-situ micro-nano bubbles in oxide chemical mechanical polishing

Silicon dioxide is the most important gate oxide dielectric material, and its surface planarization is an important factor in the continuous shrinking of the size of integrated circuits. Developing a novel chemical mechanical polishing auxiliary technique to achieve efficient polishing of oxide wafers is a significant challenge. In this study, a novel in-situ micro-nano bubbles auxiliary method, which used a nano-hydrophobic film to prepare a gas supersaturated slurry that can generate instant in-situ micro-nano bubbles during polishing, was developed for oxide wafers. Compared with conventional slurries, this auxiliary method increased the material removal rate by about 30% and ensured the low surface roughness of the wafer of 0.14 nm. The existence of micro-nano bubbles and the multi-size distribution and zeta potential of the micro-nano bubbles were measured by optical microscope and dynamic light-scattering methods. Then, to investigate the auxiliary mechanism of this in-situ micro-nano bubbles, different analytical methods, such as oxide thickness measurement system, scanning electron microscopy, Fourier transform infrared spectroscopy, and atomic force microscopy, were used to characterize the sample. The results indicated that during the polishing process, the micro-nano bubbles generated in situ have a good cleaning effect. In addition, the free radicals generated after in-situ micro-nano bubbles burst simultaneously modified the surfaces of the wafer and the pad. The improvement of the adsorption between the wafer and abrasives promoted the chemical reaction between them. After conditioning, the rougher and cleaner pad had a higher mechanical effect. Most importantly, this in-situ micro-nano bubbles auxiliary method has the potential to be applicable to all slurries.

Intraprostatic injection of exosomes isolated from adipose-derived mesenchymal stem cells for the treatment of chronic non-bacterial prostatitis.

Mesenchymal stem cells (MSCs) own the capacity to secrete trophic factors as exosomes which play significant roles in regulating the functions of other cells and preventing inflammation. Due to the inflammatory process in chronic non-bacterial prostatitis (CNP) and the ambiguity in the treatment of this disease, the present study was aimed to investigate the therapeutic use of adipose-derived MSC exosomes in an animal model of CNP. MSCs were first isolated from rat subcutaneous adipose tissue, and exosomes were extracted from them. Specific features of exosomes were characterized by a scanning electron microscope, western blot technique, and Dynamic Light Scattering methods. To establish CNP in rats, intraprostatic injection of Freund's complete adjuvant was done. After confirmation of prostatitis, intraprostatic injections of exosomes were performed for treatment. Histological evaluation revealed that treatment with exosomes resulted in a relative improvement of lesions caused by CNP. The expression of p-NF-κB and p-IκBα proteins along with inflammatory markers was significantly increased in the CNP group, which treatment with exosomes significantly reduced their expression as well as IL-1β and TNF-α proteins. The antioxidant effects of exosomes were also determined by significantly regulating glutathione peroxidase and superoxide dismutase activity and malondialdehyde levels in these animals. Our results cautiously suggest the therapeutic effects of MSC-derived exosomes against CNP-induced prostatitis through their antioxidant and anti-inflammatory activities, which should be further considered in the future.

A comparison between plain eugenol and eugenol-loaded chitosan nanoparticles for prevention of in vitro selenite-induced cataractogenesis

The purpose of this work was to improve the antioxidant and anticataractogenic potential of eugenol by encapsulating it within chitosan nanoparticles via an emulsion–ionic gelation crosslinking method. Various ratios of chitosan to eugenol (1:0.75, 1:1 and 1:1.25) were optimized by encapsulation efficiency, loading capacity, drug-releasing profile, and in-vitro antioxidant potential. Synthesized eugenol-loaded chitosan nanoparticles (ECNP 1:1) and plain chitosan nanoparticles (CNPs) were characterized by UV–visible spectrometry, dynamic light scattering (DLS), X-ray powder diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and atomic force microscopy (AFM). The range of sizes of ECNPs, as determined by the AFM and DLS methods, was approximately 200–600 nm. 3–4,5-(dimethyl-thyazol-2-yl)-2,5-diphenyltetrazolium (MTT) analysis revealed that ≥ 50% of cultured human lenticular epithelial (HLE-B3) cells remained viable when exposed to an ECNP concentration of 150 μM or less. These ECNPs were evaluated for efficacy in preventing experimental in-vitro selenite-induced cataractogenesis. Encapsulation of eugenol within chitosan nanoparticles appeared to improve the antioxidant capacity of plain eugenol; this could conceivably improve the anticataractogenic potential of eugenol.

Anticancer Potential of Temozolomide-Loaded Eudragit-Chitosan Coated Selenium Nanoparticles: In Vitro Evaluation of Cytotoxicity, Apoptosis and Gene Regulation.

Resistance to temozolomide (TMZ) is the main cause of death in glioblastoma multiforme (GBM). The use of nanocarriers for drug delivery applications is one of the known approaches to overcome drug resistance. This study aimed to investigate the possible effect of selenium–chitosan nanoparticles loaded with TMZ on the efficacy of TMZ on the expression of MGMT, E2F6, and RELA genes and the rate of apoptosis in the C6 cell line. Selenium nanoparticles (SNPs) were loaded with TMZ and then they were coated by Eudragit® RS100 (Eud) and chitosan (CS) to prepare Se@TMZ/Eud-Cs. Physicochemical properties were determined by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX), thermal gravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS) methods. Se@TMZ/Eud-Cs was evaluated for loading and release of TMZ by spectrophotometric method. Subsequently, SNPs loaded with curcumin (as a fluorophore) were analyzed for in vitro uptake by C6 cells. Cytotoxicity and apoptosis assay were measured by MTT assay and Annexin-PI methods. Finally, real-time PCR was utilized to determine the expression of MGMT, E2F6, and RELA genes. Se@TMZ/Eud-Cs was prepared with an average size of 200 nm as confirmed by the DLS and microscopical methods. Se@TMZ/Eud-Cs presented 82.77 ± 5.30 loading efficiency with slow and pH-sensitive release kinetics. SNPs loaded with curcumin showed a better uptake performance by C6 cells compared with free curcumin (p-value < 0.01). Coated nanoparticles loaded with TMZ showed higher cytotoxicity, apoptosis (p-value < 0.0001), and down-regulation of MGMT, E2F6, and RELA and lower IC50 value (p-value < 0.0001) than free TMZ and control (p-value < 0.0001) groups. Using Cs as a targeting agent in Se@TMZ/Eud-Cs system improved the possibility for targeted drug delivery to C6 cells. This drug delivery system enhanced the apoptosis rate and decreased the expression of genes related to TMZ resistance. In conclusion, Se@TMZ/Eud-Cs may be an option for the enhancement of TMZ efficiency in GBM treatment.