Dynamic Behavior Of Materials Research Articles

Experimental and numerical studies of the effects of micro/nano carbon fibers in the dynamic behavior of cement-based grouting materials for reinforcement of sand layers

Geological hazards of sand layers pose a serious threat to engineering safety. Grouting reinforcement technology is widely used in such conditions due to its convenience, economy, and effectiveness. To explore the reinforcement effect of carbon fiber (CF) modified cement-based grouting materials on sand layers, grouting solidified bodies (GSB) with CF contents of 0.0%, 0.5%, 1.0%, and 1.5% are selected for Split Hopkinson Pressure Bar (SHPB) impact tests, scanning electron microscope (SEM) scanning, and numerical simulation experiments. The mechanical properties of specimens under dynamic impact conditions and the reinforcement mechanism of CF are studied. Results show that GSB is a strain-rate-dependent material. With the increase of impact rate, peak stress, incident energy, transmitted energy, and dissipated energy of specimens gradually increase, while the integrity of specimens decreases. The CF content remarkably affects the mechanical properties of specimens. When the impact rate is constant, with the increase of CF content, the peak stress and transmitted energy of specimens show a decreasing–increasing– decreasing trend, and the performance of CF-1.0% specimens is optimal. The cement matrix is the main energy storage and release medium, accounting for 97.66% of the energy. When damaged, the cement matrix is mainly fractured. At the microcrack tip, CF influences the direction of crack propagation, reducing the radius of crack propagation, and the main failure mode of CF is debonding. CF can substantially improve the mechanical properties of specimens and reduce the number of cracks. Compared with CF-0.0%-cementitious material (CM) specimens, the peak stress of CF-1.0%-CM specimens is increased by 19.98%. The magnitude of CF force is related to the angle between crack and CF. As the angle increases from 0° to 90°, the CF force gradually increases, reaching the maximum at 90°, with an increase of 133.82%. At this angle, the anti-cracking effect of CF is most substantial. The research results can provide technical support for sand layer grouting reinforcement technology.

Special Issue “Dynamic Behavior of Brittle Materials”

Special Issue “Dynamic Behavior of Brittle Materials”

Influence of Interface Type on Dynamic Deformation Behavior of 3D-Printed Heterogeneous Titanium Alloy Materials.

Using the Split Hopkinson Pressure Bar technique, strain-limited dynamic compressive loading experiments were performed on TA1/TA15 heterostructure (HS) materials. The plastic deformation mechanisms, fracture forms, and energy absorption properties of an HS material with a metallurgical bonding interface (MB) and an HS material without a metallurgical bonding interface (NMB) are compared and analyzed. The results show that there is no significant difference between the two deformation mechanisms. The fracture forms are all "V-shaped" fractures within the TA1 part. The NMB was carried for 57 μs before failure and absorbed 441 J/cm3 of energy. The MB was carried for 72 μs before failure and absorbed 495 J/cm3 of energy. Microstructure observations show that there is a coordinated deformation effect near the MB interface compared to the NMB, with both TA1 and TA15 near the interface carrying stresses. This causes an enhancement of the MB load-bearing time and a 12% increase in energy absorption.

Effect of Cooling Rate on Dynamic Magnetic Hysteresis Loop Behaviors of Magnetic Materials by Using as a Model Mixed Spin (1, 3/2) Ising System Under an Oscillating Magnetic Field

Effect of Cooling Rate on Dynamic Magnetic Hysteresis Loop Behaviors of Magnetic Materials by Using as a Model Mixed Spin (1, 3/2) Ising System Under an Oscillating Magnetic Field

Dynamic behaviors of nickel coated carbon nanotubes reinforced ultra-high performance cementitious composites under high strain rate impact loading

Understanding the dynamic mechanical behaviors of materials is a prerequisite for reliably analyzing and predicting the dynamic response of structures, which is of great significance for transportation infrastructure and military engineering subjected to extreme loads, particularly dynamic loads at high strain rates. Nickel coated multi-walled carbon nanotubes (Ni-MWCNTs) show promise as a reinforcement to modify the dynamic mechanical behaviors of ultra-high performance cementitious composites (UHPCC). Because Ni-MWCNTs combine the high tensile strength and large aspect ratio characteristics of fibers with the nano effect of nanomaterials, as well as have excellent dispersibility due to the nickel plating on the CNTs’ surface, they effectively improve the dynamic mechanical properties of UHPCC under impact loading at high strain rates of about 100 s−1/300 s−1/500 s−1 and reduce the brittle damage degree of composites. The maximal increase in dynamic compressive strength and energy absorption capacity of UHPCC reaches 47.9% and 68.2%, respectively. This enhancement effect arises from that Ni-MWCNTs improve the microstructure and form multiple fine cracks, resulting in an increased energy consumption required for crack formation, propagation and coalescence. Additionally, the dynamic mechanical properties of Ni-MWCNTs reinforced UHPCC exhibit noticeable strain rate effects. Consequently, a strain rate-dependent logarithmic functional dynamic increase factor model and dynamic constitutive model of UHPCC filled with Ni-MWCNTs are modified herein for predicting and modeling the dynamic mechanical behaviors of composites.

Double-pulse-laser volumetric modification of fused silica: the effect of pulse delay on light propagation and energy deposition.

Volumetric modification of dielectrics by ultrashort laser pulses is a complex dynamic phenomenon involving material photoexcitation and associated nonlinear processes. To achieve control over modification, it is necessary to gain a deep insight into the dynamics of laser-excited processes that can be realized using double-laser-pulse experiments with different time separations supported by numerical simulations. In this paper, we apply this approach to investigate fused silica modification with femtosecond laser pulses that provides time-resolved information about the dynamic behavior of the laser-excited bandgap material. It is shown that the laser-generated free-electron plasma causes a shielding effect for the following pulse with a characteristic duration of ∼600 fs after the pulse action. Within this time interval, the second pulse produces a reduced modification as compared to a longer time separation between pulses. For double pulses with different energies, it was found that the volumetric modification is stronger when a lower-energy pulse couples with material first. This is explained by the combination of the effects of the re-excitation of self-trapped excitons, which are generated as a result of free electron recombination and associated light shielding. Experimental results are supported by numerical simulations of double laser pulse propagation in nonlinear media based on Maxwell's equations. Our findings offer a route for better controlling the inscription of 3D photonic structures in bulk optical materials.

The Development of a 2D Numerical Model of a Device Using the Elastocaloric Effect to Cool Electronic Circuits

AbstractThe scientific community has been working hard lately to develop fresh, environmentally friendly refrigeration technologies. Those based on solid-state refrigerants are among the Not-In-Kind Refrigeration Technologies that show great promises. The one based on the elastoCaloric Effect is among the most interesting of them. This paper presents the development of a 2D numerical model for a device harnessing the elastocaloric effect with the primary objective of cooling electronic circuits. The study focuses on the intricate interplay between mechanical and thermal aspects, capturing the dynamic behavior of the elastocaloric material in response to cyclic mechanical loading. The numerical model incorporates detailed descriptions of the electronic circuits, accounting for heat dissipation and thermal management. Through simulations, the optimal configuration for efficient cooling is explored, considering various operative conditions and mechanical loading conditions (tensile and bending). The findings contribute to the advancement of elastocaloric cooling technology, offering insights into the design and optimization of devices aimed at enhancing electronic circuit performance through effective thermal control. The results that the most promising configuration is based on bending, a design choice resulting appropriate for cooling the electronic circuits.

Application of ultrasonic waves to evaluate the rheological properties of non-Newtonian slurries: a preliminary study

An ultrasonic-wave system was developed to measure the rheological properties of non-Newtonian materials based on their responses to shear and pressure waves. This system was composed of a commercial shear wave transducer and various homemade devices, including a signal generator, a signal conditioner, and a transmission/receiving switch. The shear wave reflections at the interface between the delay line and the unknown test materials can be interpreted by the signals measured with calibration materials (e.g. air, water, olive oil and honey) that have well-known rheological properties. If the Voigt viscoelastic model is used to describe the dynamic behaviour of these test materials, the interpreted data can be used to determine the acoustic impedances, and thus solve for their shear moduli (G), kinematic viscosities (ν) and bulk densities (ρ). After the calibration procedures, the proposed system was used to test a consolidating kaolinite slurry with zero salinity and an initial suspended sediment concentration of 420 g l–1. The measurements showed that the shear modulus G is developed until consolidation for approximately 100 h. Afterward, the G gradually approached a value on the order of 500 N m–2 after approximately 200 h. This corresponded to an initial viscosity of approximately 7 × 10−5 m2 s–1, which decreased slowly over time to approximately 4 × 10−6 m2 s–1 after 300 h. With minor modification to capture pressure waves from the shear wave transducer, the bulk density can also be measured. The integrated system offers a non-invasive and efficient method for characterizing non-Newtonian fluids, providing valuable insights into their rheological properties, which are crucial for a wide range of industrial and scientific applications.

Numerical study on dynamic cracking characteristic and mechanism of quasi-brittle materials under impulsive loading

This study focuses on investigating the dynamic cracking behaviors of quasi-brittle materials under impulsive loading using the extended non-ordinary state-based peridynamic (NOSB-PD) model. This extended model incorporates two stress-based failure criteria: Mohr-Coulomb and maximum tensile stress criteria, to represent shear and tensile fractures of quasi-brittle materials, respectively. By analyzing the evolution characteristics of the maximum principal stress obtained from the NOSB-PD model, the fracture mechanisms of quasi-brittle materials subjected to impulsive loading are explored. The research reveals that tensile failure predominantly governs the initiation and propagation processes of quasi-brittle materials under impulsive loading. The stress concentration effect, transfer effect, and dissipation effect observed in the maximum principal stress fields provide insights into the cracking mechanism during the failure processes of such materials. To validate the findings, the crack initiation modes and crack propagation paths obtained from the NOSB-PD model are compared with those obtained from the existing experimental and numerical approaches. The results demonstrate that the extended NOSB-PD model is effective in addressing fracture problems associated with quasi-brittle materials under impulsive loading conditions.

Finite Element Modeling and Experimental Validation of AA 5052-H34 Machining: A Comprehensive Study on Chip Morphology and Temperature Analysis

An understanding of the dynamic behavior of materials plays a crucial role in machining improvement. According to the literature on this issue, one of the alloys whose dynamic behavior has been investigated less is AA 5052-H34, despite its numerous industrial applications. Using finite element (FE) modeling greatly reduces machining research costs. This research delved into the dynamic behavior modeling of AA 5052-H34 during dry-turning FE simulation. The dynamic behavior of AA 5052-H34 was achieved using the Johnson–Cook (J-C) constitutive equation, which was calculated using the uniaxial tensile and Split-Hopkinson pressure bar (SHPB) tests. To confirm the accuracy of the material model, these SHPB tests were then simulated in Abaqus. The J-C constitutive equation, paired with a J-C damage criterion, was employed in a chip formation and cutting temperature simulation. It was found that the feed rate significantly influences the dynamic behavior of AA 5052-H34. The thickness and morphology of the chip were investigated. The experimental and numerical chip thicknesses showed a direct relationship with the feed rate. The simulation temperature was also analyzed, and, as expected, it showed an upward trend with increasing cutting speed and feed rate. Then, the accuracy of the proposed FE simulation was confirmed by the agreement of the experimental and simulation results.

A review on applications of molecular dynamics in additive manufacturing

Additive manufacturing (AM) is an emerging technology that has significant geometric and material capabilities, because of which it is being used in different fields such as aerospace, healthcare, automotive, architecture, and construction. This process takes the digital data for the three-dimensional model to be made and adds materials accordingly in a layer-by-layer manner. Therefore, the understanding of materials at the atomic level may help in getting optimized output in the AM process, and it can have a significant impact on the final products. Molecular dynamics (MD) studies the dynamic behavior of molecules and materials at the atomic and molecular scales. The main objective of this review article is to briefly discuss how MD simulations may be utilized to examine AM processes. This review also covers the potential benefits of using MD to characterize AM processes, the current literature on using MD to simulate AM processes, the primary obstacles and limitations of MD simulations, and the methodologies utilized in AM simulations using MD. Finally, this article concludes with an in-depth discussion and outlines future research potentials.

Unbiased construction of constitutive relations for soft materials from experiments via rheology-informed neural networks.

The ability to concisely describe the dynamical behavior of soft materials through closed-form constitutive relations holds the key to accelerated and informed design of materials and processes. The conventional approach is to construct constitutive relations through simplifying assumptions and approximating the time- and rate-dependent stress response of a complex fluid to an imposed deformation. While traditional frameworks have been foundational to our current understanding of soft materials, they often face a twofold existential limitation: i) Constructed on ideal and generalized assumptions, precise recovery of material-specific details is usually serendipitous, if possible, and ii) inherent biases that are involved by making those assumptions commonly come at the cost of new physical insight. This work introduces an approach by leveraging recent advances in scientific machine learning methodologies to discover the governing constitutive equation from experimental data for complex fluids. Our rheology-informed neural network framework is found capable of learning the hidden rheology of a complex fluid through a limited number of experiments. This is followed by construction of an unbiased material-specific constitutive relation that accurately describes a wide range of bulk dynamical behavior of the material. While extremely efficient in closed-form model discovery for a real-world complex system, the model also provides insight into the underpinning physics of the material.

Evaluation of the low-velocity impact response of high-performance multi-axial warp-knitted flexible composites

This article aims to investigate the dynamic behavior of high-performance multi-axial warp-knitted flexible composite materials under low-velocity impact tests through experiments and numerical simulations. In this paper, high-performance multi-axial warp-knitted flexible composites were prepared. Three different preparation processes, 175°C-5 min, 185°C-10 min, and 195°C-15 min, were designed for the multi-axial warp-knitted flexible composites. Studied the impact response of different preparation processes, initial impact energy, and punch shapes and diameters on materials. The results showed that the flexible composites prepared by various processes exhibit the same impact response curves in the impact resistance process, while the damage morphology and failure modes of the samples are different. Different initial impact energies caused multiple failure modes in the samples. The material showed penetration damage at high energy impacts and permanent depression damage at low energies. For different punch shapes, the impact resistance of materials to hemispherical punches is better than that of cylindrical punches. Numerical simulations were carried out using the finite element software ABAQUS. The custom material subroutine (VUMAT) based on the Hashin damage criterion model was implemented in the finite element program. The experimental and numerical simulation results agree regarding impact response characteristics. This paper analyzes the composite damage shapes, crack extensions caused by low-velocity impact tests and finite element simulation on multi-axial warp-knitted flexible composites. It provides a valuable reference for failure and structural optimization of multi-axial warp-knitted flexible composites for architectural applications.

A Review: Principles and Applications of High-Pressure In Situ Time-Resolved Transient Absorption Spectroscopy

Time-resolved transient absorption (TA) spectroscopy measurement technology provides detailed information into the ultrafast dynamics by tracking the transitions and deactivation processes of the excited-state carriers, which holds vast potential for investigating processes related to the luminescence and nonradiative recombination of materials. Pressure is considered a potent tool for tuning the carrier dynamic behaviors. The combination of high-pressure experimental technology and time-resolved TA spectroscopy measurement technology enables researchers to reveal the inherent relation between the structure and optical properties of materials, which is crucial for optimizing material performance and applications in the field of optoelectronics. In this review, the principles and the theoretical foundations of high-pressure time-resolved TA spectroscopy measurement technology will be introduced, and the research advancements in ultrafast dynamics processes of materials under high pressure will be summarized and discussed. In addition, we will expound on the future prospects of time-resolved TA spectroscopy measurement technology to detect the ultrafast dynamic behaviors of materials and complexes under the coregulation of temperature and pressure.

Aquatic Functional Liquid Crystals: Design, Functionalization, and Molecular Simulation.

Aquatic functional liquid crystals, which are ordered molecular assemblies that work in water environment, are described in this review. Aquatic functional liquid crystals are liquid-crystalline (LC) materials interacting water molecules or aquatic environment. They include aquatic lyotropic liquid crystals and LC based materials that have aquatic interfaces, for example, nanoporous water treatment membranes that are solids preserving LC order. They can remove ions and viruses with nano- and subnano-porous structures. Columnar, smectic, bicontinuous LC structures are used for fabrication of these 1D, 2D, 3D materials. Design and functionalization of aquatic LC sensors based on aqueous/LC interfaces are also described. The ordering transitions of liquid crystals induced by molecular recognition at the aqueous interfaces provide distinct optical responses. Molecular orientation and dynamic behavior of these aquatic functional LC materials are studied by molecular dynamics simulations. The molecular interactions of LC materials and water are key of these investigations. New insights into aquatic functional LC materials contribute to the fields of environment, healthcare, and biotechnology.

Light-powered sustained chaotic jumping of a liquid crystal elastomer balloon

Chaotic systems comprising of active materials have the capability to absorb energy directly from the external environment to preserve their own sustained motion, holding tremendous potential for utilization in diverse fields, for instance, controllable sensors, energy harvesting, motion behavior control of smart materials and more. In this paper, a sustained jumping system consisting of photosensitive liquid crystal elastomer (LCE) balloon is developed innovatively, in which the LCE balloon can transition from a static state to a sustained jumping state under periodic illumination. Given the dynamic constitutive model of LCE and Hertz contact theory, the nonlinear dynamics model of the sustained jumping LCE balloon system is established. Numerical calculations demonstrate the existence of two jumping modes for the LCE balloon, i.e., periodic jumping and chaotic jumping. The mechanism of sustained jumping that counterbalances the energy dissipation by the net work combining contact expansion and buoyancy variation, as well as the mechanism of chaotic phenomena, are revealed. In addition, the influences of vital parameters on the jumping mode of the balloon are examined, and the conversion of the jumping modes with parameters is illustrated by bifurcation diagrams. This work can broaden the knowledge of the dynamic behavior of smart materials, which is of guiding significance for the research on chaos control and chaotic system design.

Special Issue on the Dynamic Behavior of Energetic Materials

Special Issue on the Dynamic Behavior of Energetic Materials

Additive manufacture of ultrasoft bioinspired metamaterials

The dynamic loading behavior of materials plays a vital role in various engineering applications, such as aerospace protective components, armor, marine infrastructures, and automotive crash safety. The advent of additive manufacturing technologies has enabled the design of metamaterials that exhibit exceptional mechanical performance and artificially engineered properties not found in nature. However, fabricating ideal materials that resist dynamic loading is challenging because of the complexity of dynamic mechanical processes and varying requirements across different applications. In this study, a novel hierarchical design is proposed that combines natural fiber-inspired frameworks with graphene-inspired parent structures. This design aims to produce metamaterials, with characteristics such as reduced dynamic compressive strength, high energy absorption, and programmable dynamic loading, via advanced manufacturing technologies. An additive-manufacturing-oriented digital design approach and machine learning techniques were employed to engineer the dynamic loading performance of graphene-inspired metamaterials using the bonding principles inspired by natural fibers, to facilitate the design of next-generation metamaterial for advanced manufacturing. Experimental results illustrate the significant improvements achieved with our metamaterials compared to their existing counterparts. These improvements include a decrease in dynamic compressive strength of up to 86 %, while maintaining a remarkable 682 % enhancement in energy absorption during dynamic compressions, with a 42 % reduction in the energy decay rate. A compositional design strategy and programmable dynamic compression curve methodology is proposed that enable the tailored optimization of dynamic loading behaviors without modifying the base topology of metamaterials. This research offers a promising pathway for the development of next-generation materials, engineered to withstand dynamic loadings with intelligent and programmable performances suitable for aerospace, defense, and other high-value applications. By leveraging the advantages of natural fiber-inspired structures and graphene-inspired metamaterials, this work contributes to the advancement of materials with tailored resistance to dynamic loading and opens new possibilities for intelligent dynamic loading performance.

Impact induced compression and decompression waves in porous meta-materials modeled using a continuum theory of phase transitions

Porous meta-materials with both regular and random microstructure are of intense research interest today due to their interesting dynamical properties, including but not limited to, their acoustic band structure, shock absorption properties, and fracture toughness. Some of these materials can exist in a rarefied or densified state depending on the state of stress, and recover their original configuration after a cycle of loading and unloading. Often, they exhibit a hysteretic stress–strain response under quasistatic uniaxial compression. As such, many aspects of their mechanical behavior can be captured using a continuum theory of phase transitions. In this work, the dynamical behavior of such materials is explored. It is shown that the impact problem for these materials can result in propagating shocks, phase boundaries, and fans. The impact problems admit multiple solutions for the same set of initial and boundary conditions leading to non-uniqueness. This non-uniqueness can be remedied using a nucleation criterion and kinetic laws, as is known from the continuum theory of phase transitions. The fan solutions which arise in decompressive impact problems have not received much attention in the literature and may be regarded as a novel contribution of this work. The analysis presented here may have applications in the dynamic behavior of a broad class of porous materials including architected truss-like metastructures and random fiber networks.

Goufo-Caputo fractional viscoelastic photothermal model of an unbounded semiconductor material with a cylindrical cavity

In order to describe the photothermal dynamic behavior of viscoelastic semiconductor materials, the authors of this work propose a fractional modification of the Kelvin-Voigt type. The generalized Mittag-Leffler function method with two parameters was utilized as the non-local, nonsingular kernel of the Goufo-Caputo fractional operator, which is similar to the AB fractional derivative. Also, a new concept of photovoltaic heat transfer has been developed to describe the process of photothermal heating in semiconductors, in which light energy is converted into thermal energy by absorption. This unique model is grounded in the theoretical framework of the Moore-Gibson-Thompson (MGT) equation, and it offers additional insights into the underlying process of light sensitive heat transfer, as well as the intricate interaction between heating signals, elasticity, and plasma. As a direct application of the proposed model, the photothermal interactions that occur when an infinitely rotating semiconductor material with a cylindrical hole is subjected to a laser thermal flux and immersed in a constant axial magnetic field have been investigated. These findings may have implications for developing optically absorbent nanostructures and their use in photothermal energy generation. For this reason, the comparison of modified photoelasticity models with spherical derivatives and classical models applied to semiconducting materials seems interesting.