Amplitude Dynamic Range Research Articles

Marine magnetotelluric and controlled source electromagnetics signal simulative generator

Ocean bottom electromagnetic receivers (OBEMs) are invaluable tools for observing seafloor electromagnetic signals, primarily used in magnetotelluric (MT) sounding and marine controlled source electromagnetics (MCSEM). However, the high operational costs of deploying OBEMs require thorough pre-deployment testing to enhance the data reliability and quality. Commercial signal generators used for MT and controlled source electromagnetic (CSEM) testing often fall short of the restricted terms of the frequency range, signal-to-noise ratio, storage depth, time synchronization, and amplitude dynamics. To address these limitations, we developed a specialized marine MT and CSEM signal simulative generator. The generator employs pseudorandom number code-based white noise to simulate MT signals and uses multi-frequency synthesis and amplitude modulation (AM) to generate CSEM signals. The system is developed using a low-power microcontroller unit and a field programmable gate array platform, integrating various circuits such as power, clock, encoding, control, data storage, chopper, and amplification circuits. The generator simultaneously outputs four-channel white noise and AM signals. The white noise feature provides a wide and adjustable frequency band and amplitude, while the AM feature provides a large dynamic amplitude range and multi-frequency synthesis at various carrier frequency points. Comprehensive testing verified the performance of the proposed simulative generator. The test results demonstrate that the MT simulated signals cover a frequency range from 1 E4s to 100 Hz, providing adjustable amplitudes between 10 μVpp and 10 mVpp. The CSEM simulated signals include standard square waves, third harmonic waves, and seventh harmonic waves, with amplitudes adjustable from 10 mVpp to 10 Vpp. The proposed simulative generator enhances the efficiency of OBEM functional testing and provides essential equipment support for maintaining the quality of marine data.

A seven-channels microwave interferometer measurement system for measuring electron density distribution in hypervelocity transient plasma flow

When a hypersonic vehicle is flying in the near space region, the strong friction between the vehicle and the air can cause the air to ionize. As a result, the plasma sheath around the vehicle and the wake flow field behind it are formed, significantly affecting the electromagnetic (EM) scattering characteristics of the vehicle and resulting in the communication blackout. Therefore, the investigation of electron density distribution of the plasma sheath and wake flow field is of the great significance in the detection, communication, etc. of the hypersonic target. In order to meet the requirements for on-ground electron density distribution measurement of the transient plasma flow fields, the feasibility of measuring electron density profile with seven-channel microwave interferometer measurement system is demonstrated in this work. The wake plasma is modeled as a non-uniform multilayer medium, and the full-wave simulation software FEKO is used to calculate the phase-shift information of EM wave transmitting through non-uniform single-layered dielectric plate, uniform and non-uniform multi-layered dielectric plates. According to the simulation results, the dielectric constant of the substrate is retrieved and compared with the preset result. The retrieved results show that it is feasible that the dielectric constant distribution of non-uniform multi-layered dielectric plate is measured by utilizing the proposed microwave interferometer system with one transmission port and seven receptions. The amplitude-phase dynamic range analysis of the proposed Ka-band microwave measurement system is also carried out. The key technologies including large instantaneous amplitude-phase dynamic range and ray tracking inversion algorithm for two-dimensional (2-D) electron density distribution are also developed. Finally, the complete scheme of Ka-band seven-channel microwave interferometer measurement system is introduced. The system includes one lens antenna to generate the required plane wave and seven open-ended waveguide receiving antennas which are asymmetrically arranged to improve the lateral spatial resolution of the system. The system exhibits the amplitude dynamic range and the phase dynamic range of over 65 dB and 180° under 1 MHz IF bandwidth respectively. The plasma electron density distributions are measured by utilizing the proposed seven-channel microwave interferometer system in the ballistic range and multi-functional shock tube. The response time of the system is smaller than 1μs, satisfying the requirement for the two-dimensional distribution measurement of the transient plasma flow field generated by the ballistic range and multi-functional shock tube. The differences between experimental and numerical results are less than 0.5 order of magnitude, and the variations in transient plasma generated in both ballistic target and shock tube equipments are well detected. The measurement range of plasma electron density is 10<sup>10</sup>－10<sup>13</sup> cm<sup>–3</sup> and the spatial resolution is better than 15mm. In addition, the proposed ray tracing method is also used to invert the two-dimensional (2D) electron density distributions of both square layered model and cylindrical layered model under identical experimental state. The results are in consistent with each other, indicating that the proposed ray tracing method can be used in the inversion of 2D electron density distribution of plasma with different shapes.

Synthesis of a Thinned Prephased Electronically Steered Phased Array Using Excitation Control of Both the Small Amplitude Dynamic Range Ratio and Low-Resolution Phase

Synthesis of a Thinned Prephased Electronically Steered Phased Array Using Excitation Control of Both the Small Amplitude Dynamic Range Ratio and Low-Resolution Phase

Refining and extending measures for fricative spectra, with special attention to the high-frequency rangea).

Fricatives have noise sources that are filtered by the vocal tract and that typically possess energy over a much broader range of frequencies than observed for vowels and sonorant consonants. This paper introduces and refines fricative measurements that were designed to reflect underlying articulatory and aerodynamic conditions These show differences in the pattern of high-frequency energy for sibilants vs non-sibilants, voiced vs voiceless fricatives, and non-sibilants differing in place of articulation. The results confirm the utility of a spectral peak measure (FM) and low-mid frequency amplitude difference (AmpD) for sibilants. Using a higher-frequency range for defining FM for female voices for alveolars is justified; a still higher range was considered and rejected. High-frequency maximum amplitude (Fh) and amplitude difference between low- and higher-frequency regions (AmpRange) capture /f-θ/ differences in English and the dynamic amplitude range over the entire spectrum. For this dataset, with spectral information up to 15 kHz, a new measure, HighLevelD, was more effective than previously used LevelD and Slope in showing changes over time within the frication. Finally, isolated words and connected speech differ. This work contributes improved measures of fricative spectra and demonstrates the necessity of including high-frequency energy in those measures.

4D Seismic Least Square Migration in Carbonates: A Case of Successful Matching

4D seismic surveys are now routinely used to monitor hydrocarbon reservoirs. Because seismic reflections are sensitive to formation stress and fluid content, repeated seismic surveys are able to detect pressure changes and fluid exchanges that occur during field production. These measurements can help to optimise recovery strategy and identify areas where hydrocarbons have been bypassed. In practice, the seismic signal associated with such changes may be negligible, especially in heterogeneous carbonate reservoirs. However, by applying a 4D seismic co-processing workflow, we were able to detect and quantify a 4D signal even with suboptimal repeated acquisition geometry. Seismic inversion helped to overcome noise, multiple contamination, and differences in dynamic amplitude range between baseline and monitor seismic surveys. Matching the 4D seismic signal to changes in reservoir production characteristics aided in the investigation of the mechanism underlying the observed 4D signal. Detectability of 4D signals was found to be primarily related to changes in reservoir pressure and fluid saturation, which increased from 2010 to 2020 the time-lapse between the base and monitor survey.

Анализ параметров нелинейности и фазовых соотношений аналоговых окончаний телекоммуникационных сетей

The main calculation ratios for the characteristics of nonlinearity are presented: amplitude characteristic, dynamic range and coefficients of nonlinear distortions (harmonic coefficients). The examples show the order of their calculation and analysis. The article indicates that due to the diversity of reception and transmission of multi-channel transfer systems measuring the phase-frequency characteristic is extremely difficult. As a result, approaches to normalising the group transmission time are proposed. The article presents that the value deviation of the group signal transmission time in the channel from the value measured at a frequency of 1.9 kHz in a simple voice frequency channel is normalised, as well as the relative group transmission time regarding the minimum value for various types of endings built on the basis of digital transmission systems

An Effective Optimization Methods for the Suppression of Edge Effects in Ultrawideband Tightly Coupled Antenna Arrays

An effective optimization method is proposed for the suppression of edge effects in finite ultrawideband tightly coupled antenna arrays (TCAAs). By designing a practical finite TCAAs, the influences of edge effects on active voltage standing wave ratio (VSWR) are analyzed. Meanwhile, both the active VSWR and the array gain pattern are formulated as analytical expressions with respect to amplitude and phase excitations for analyzing the design freedom of edge effects. Aimed at suppressing the edge effects within an ultrawideband operation band, a nonconvex optimization problem is established for the synthesis of tightly coupled dipole arrays (TCDAs), where array gains at considered scanning angles and frequencies satisfying given maximum active VSWR and amplitude dynamic range ratio (DRR) are maximized. The nonconvex problem is transformed into an iterative convex optimization problem by the use of an iterative way, and the amplitude and phase excitations are efficiently solved by the convex optimization algorithm accordingly. By comparing to the traditional uniform amplitude and progressive phase excitation (UAPPE) method, the simulated and measured results of the ultrawideband TCDA show that the proposed method can slightly improve array gains at most frequencies, while the active VSWRs are suppressed to 3 over a 10:1 bandwidth when scanning up to 45°.

Peculiarities of amplitude spectra of the third order for the early detection of indoor fires

The object of this study is the dynamics of hazardous parameters of the gas environment during the ignition of materials. The problem that was solved is the early detection of fires in the premises. The research results indicate the nonlinear nature of the dynamics of hazardous parameters of the gas environment in the absence and presence of materials ignition. It was established that the bispectrum amplitude, in contrast to the amplitude spectrum of the hazardous parameters of the gas medium, contains information on the reliable detection of fires. As such information, the value of the positive dynamic amplitude range of bispectrum is used. It was established that during the ignition of alcohol, the positive dynamics of the amplitude bispectrum of all dangerous parameters of the gas medium change. Significant changes are characteristic of smoke density (from 1 dB to 30 dB) and temperature (from 1 dB to 70 dB). The dynamic range of amplitude bispectrum for CO concentration is increased from 30 dB to 70 dB. Paper ignition was found to reduce the dynamic range of the amplitude bispectrum for smoke density from 40 dB to 20 dB. At the same time, the dynamic range of amplitude bispectrum for carbon monoxide concentration and temperature increases to 60 dB. The ignition of wood causes an increase in the dynamic range of the amplitude bispectrum relative to the concentration of carbon monoxide from 40 dB to 60 dB, and the temperature – from 30 dB to 40 dB. It was established that when textiles are ignited, the range of dynamics of the amplitude bispectrum for temperature increases from 10 dB to 60 dB. The results indicate that the dynamic characteristics of the amplitudes of the bispectrum of the gas medium can be used in practice for the early detection of fires in the premises

Four-Dimension Seismic Analysis in Carbonate: A Closed Loop Study

Four-dimensional seismic analysis is an effective reservoir surveillance tool to track the changes of fluid and pressure phases in the oil and gas reservoirs over time of the baseline and monitoring seismic acquisition. In practice, the 4D seismic signal associated with such changes may be negligible, especially in heterogeneous carbonate reservoirs. Therefore, 4D seismic analysis is a model for integrating various disciplines in the oil and gas industry, such as seismic, petrophysics, reservoir engineering, and production engineering. In this study, we started the 4D seismic workflow with a 1D well-based 4D feasibility study to detect the likelihood of 4D signals before performing 4D seismic co-processing of the baseline and monitoring surveys starting from the seismic field data of both datasets. As part of a full 4D seismic co-processing of the baseline and monitor surveys, 4D seismic metric attributes were analyzed over the survey area to measure the improvement in seismic acquisition repeatability for the scarce 1994 baseline seismic and the 2014 monitor seismic survey. For the monitor survey, a 4D time-trace shift was performed using the baseline survey as a reference to measure the time shifts between the baseline and monitor surveys at 20-year intervals. The 4DFour-dimensional dynamic trace warping was followed by a 4D seismic inversion to compare the 4D difference in the seismic inverted data with the difference in seismic amplitude. The seismic inversion helped overcome noise, multiple contaminations, and differences in dynamic amplitude range between the baseline and monitor seismic surveys. We then examined the relationship between well logs and seismic volumes by predicting a volume of log properties at the well locations of the seismic volume. In this method, we computed a possibly nonlinear operator that can predict well logs based on the properties of adjacent seismic data. We then tested a Deep Feed Forward Neural Network (DFNN) on six wells to adequately train and validate the machine learning approach using the baseline and monitoring seismic inverted data. The objective of trying such a deep machine learning approach was to predict the density and porosity of both the baseline and the monitoring seismic data to validate the accuracy of the 4D seismic inversion and evaluate the changes in reservoir properties over a time-lapse of 20 years of production from 1994 to 2014. Finally, we matched the 4D seismic signal with changes in reservoir production properties, investigating the mechanism underlying the observed 4D signal. It was found that the detectability of 4D signals is primarily related to changes in fluid saturation and pressure changes in the reservoir, which increased from 1994 to 2014. This innovative closed-loop research proved that the low repeatability of seismic acquisition can be compensated by optimal 4D seismic co-processing with a complete integration workflow to assess the reliability of the 4D seismic observed signal.

Development of an analytical method for pattern synthesizing of linear and planar arrays with optimal parameters

Typically, in the synthesis problem of an equally-spaced array, the number of array elements and the element spacing should be specified before. In this paper, based-on the Nyquist–Shannon sampling theorem, a new procedure is introduced, which is used in choosing the optimal value of the number of array elements and the element distance. After specifying the number of array elements and the element spacing, an analytical method based-on the integral transform with the Gegenbauer kernel is used for the calculation of the excitation weights of the array. Also, directivity, amplitude dynamic range and mutual coupling considerations are regarded in the introduced procedure. Additionally, it is shown that the proposed method can be developed for planar and ring arrays. Several test cases with special features are examined to verify the performance of the presented method.

Control of optical chaos spectrum in semiconductor laser for secure RoF communication

A critical requirement in optical chaos based secure radio over fiber (RoF) system design is the ability to control center frequency, spectral bandwidth, power level and signature of chaos to submerge message with sufficient horizontal and vertical margins both in time and frequency domains. Once frequency domain masking is completely achieved, time domain masking is met automatically, the former being more stringent. In a direct modulated semiconductor laser, the three control parameters are bias current (Ibias), modulation current (Imod) and modulation frequency (ωa). It is found that Imod increases bandwidth and amplitude dynamic range of chaotic pulses. Ibias increases the cavity power and hence average peak amplitude of laser chaotic pulses. The modulation frequency increases the speed of overall cavity dynamics and hence is used to increase the bandwidth of chaos but a corresponding increase in bias and modulation currents is required to support high repetition pulses. The results show relationship between three control parameters (bias current, modulation current and modulation frequency) in a direct modulated semiconductor laser and optical chaos bandwidth using regression.

Research on Multibeam Pattern Synthesis of Time Modulated Array Based on Convex Optimization

An efficient multibeam pattern synthesis method for time modulated array (TMA) is proposed in this paper. The aim of this method is to generate a beam pattern on the specified sideband of TMA. The pattern synthesis problem is divided into two stages. In the first stage, the sequential convex optimization method is used to suppress the sidelobe of the center frequency and reduce the amplitude dynamic range ratios (DRR). In the second stage, the iterative convex optimization method is used to realize the multibeam pattern synthesis in the sideband. Owing to the introduction of convex optimization, the proposed method could be more efficient than approaches using a global optimization algorithm. The proposed method is capable of realizing pattern synthesis under different DRR constraints and different beam radiation directions. Numerical examples of two beams and four beams patterns of 1000-element time modulated linear array verify the effectiveness of the proposed method.

Low-Frequency Vibration Measurement Based on the Concentric-Circle Grating Projection System

In low-frequency vibration measurement field, optical dynamic 3-D measurement based on camera-projector system is a novel approach. In this system, linear sinusoidal grating is the most common projection mode, which can meet the requirements of some vibration measurement. However, the dynamic measurement range of amplitude using the combination of linear grating and Fourier transform profilometry (FTP) is limited in some vibration measurement environments, because the linear fringe is periodic. To solve the problem, this article proposes a low-frequency vibration measurement method based on the concentric-circle grating camera-projector system and FTP. The center of the circle is traced dynamically and the coordinate system is transformed with the center of the circle as the origin. The phase distribution of concentric-circle grating is obtained by coordinate system transformation and FTP. By exploring the relationship between phase and relative height, the time-varying curve of the object surface height is recovered, which contains the vibration information. The experiments compare the measurement ability of the concentric-circle and linear grating. The results show that the linear grating and concentric-circle grating with the similar amplitude resolution have different amplitude measurement range. In this experiment, the maximum measurement range of linear grating is about 2.4 mm, while that of concentric-circle grating is more than about 3.9 mm. It means that the concentric-circle grating projection method can measure a large dynamic range of amplitude under the condition that the center of the circle can be traced, and solve the problem of amplitude limitation of linear grating in the use of FTP.

Research on Side Lobe Suppression of Time-Modulated Sparse Linear Array Based on Particle Swarm Optimization

An efficient pattern synthesis approach is proposed for the synthesis of a time-modulated sparse linear array (TMSLA) in this paper. Due to the introduction of time modulation, the low/ultralow side lobe level can be obtained with a low amplitude dynamic range ratio. Besides, it helps reduce the difficulty of antenna feeding system effectively. Based on particle swarm optimization (PSO) and convex (CVX) optimization, this paper proposes a hybrid optimization method to suppress the grating lobes of the sparse arrays, peak side lobe level (PSLL), and peak sideband level (PSBL). Firstly, the paper utilizes the CVX optimization as a local optimization algorithm to optimize the elements’ switch-on duration time, which reduces the side lobe of the array. Secondly, with the PSBL as the objective function, the paper adopts the PSO as a global optimization algorithm to optimize the elements’ positions and switch-on time instant, which helps reduce the loss of sideband power caused by time modulation. With respect to the time modulation model, variable aperture sizes (VAS) and more flexible pulse-shifting (PS) schemes are used in this paper. Owing to the introduction of time modulation and CVX optimization, the proposed method is much more feasible and efficient than conventional approaches. Furthermore, it has better array pattern synthesis performance. Numerical examples of the TMSLA and comparisons with the reference are presented to demonstrate the effectiveness of the proposed method.

Spectral and temporal manipulations of SFF envelopes for enhancement of speech intelligibility in noise

This paper presents a method for modifying speech to enhance its intelligibility in noise. The features contributing to intelligibility are analyzed using the recently proposed single frequency filtering (SFF) analysis of speech signals. In the SFF method, the spectral and temporal resolutions can be controlled using a single parameter of the filter, corresponding to the location of the pole on the negative real axis with respect to the unit circle in the z-plane. The SFF magnitude (envelope) and phase at several frequencies can be used to synthesize the original speech signal. Analysis of highly intelligible speech shows that the speech signal is more intelligible when it has higher dynamic range of amplitude locally (fine structure) and/or lower dynamic range of amplitude globally (gross structure) in both the spectral and temporal domains. Some features of normal speech are modified at fine and gross temporal and spectral levels, and the modified SFF envelopes are used to synthesize speech. The proposed method gives higher objective scores of intelligibility compared to original and the reference method (spectral shaping and dynamic range compression), under different conditions of noise. In subjective evaluation, though the word accuracies are not significantly different between the proposed and reference methods, listeners seem to prefer the proposed method as it gives louder and crisper sound.

Wideband and High Dynamic DFB Laser Used for Short Pulse Recovery

The directly modulated distributed feedback (DM-DFB) laser module is applied as a signal recovery device in a ~3ns pulse modulated 1053 nm laser system. We present its performance on short pulse recovery with various pulse waveforms. The DM-DFB laser has a bandwidth as high as 20 GHz with in-band flatness less than ±3 dB. The dynamic range of the high linear DM-DFB laser is as high as 60 dB. The recovery system employing this DM-DFB laser can operate normally with the original pulse peak amplitude dynamic range of 100:1. The experimental results show that both rectangular wave pulse and exponential wave pulse have been excellently recovered through the recovery system. The normalized deviation is lower than 0.3% when the original pulse peak amplitude is higher than 1000 mV.

Precision vector control of a superconducting RF cavity driven by an injection locked magnetron

The technique presented in this paper enables the regulation of both radio frequency amplitude and phase in narrow band devices such as a Superconducting RF (SRF) cavity driven by constant power output devices i.e. magnetrons [1]. The ability to use low cost high efficiency magnetrons for accelerator RF power systems, with tight vector regulation, presents a substantial cost savings in both construction and operating costs - compared to current RF power system technology. An operating CW system at 2.45 GHz has been experimentally developed. Vector control of an injection locked magnetron has been extensively tested and characterized with a SRF cavity as the load. Amplitude dynamic range of 30 dB, amplitude stability of 0.3% r.m.s, and phase stability of 0.26 degrees r.m.s. has been demonstrated.

Recognition of Acoustic Emission Signal based on the Algorithms of TDNN and GMM

Friction fault diagnosis of rotating machinery based on acoustic emission ( AE) technique is a research hotspot in recent years. The rotating machinery will produce multi-source noise during the operation process, so how to correctly identify the friction acoustic emission signals has become a key factor for accurate diagnosis of the fault. In this paper, it proposes a Gaussian mixed model (GMM) based on an embedded time delay neural network (TDNN) to identify friction acoustic emission signals. It comprehensively utilizes the advantages of the learning ability of time delay neural network abo ut data structure and data distribution presentation capability of Gaussian mixture model. Time delay neural network fully exploits the time-ordered of eigenvector set, makes the maximum likelihood probability more reasonable which needs to assume that the variables are independent of each other through the transformation of the time delay network and uses them for the training as a whole with the criteria of maximum likelihood (ML) probability. During the training process, the parameters of Gaussian mixture model and neural network update alternately. The average amplitude, maximum amplitude, amplitude dynamic range, the Hurst exponent and approximate entropy (ApEn) of friction acoustic emission signals are selected as the characteristic parameters of fault recognition and these five parameters constitutes the input parameters vector of the identification model. Through the verificatio n the AE signals of different friction states collected on the rotor test bed, the experimental results show that the identification method o f rotor friction acoustic emission signals of Gaussian mixed model based on embedded time delay neural network is an effective mean of identification with high recognition efficiency.

Higher order parametric excitation modes for spaceborne quadrupole mass spectrometers

This paper describes a technique to significantly improve upon the mass peak shape and mass resolution of spaceborne quadrupole mass spectrometers (QMSs) through higher order auxiliary excitation of the quadrupole field. Using a novel multiresonant tank circuit, additional frequency components can be used to drive modulating voltages on the quadrupole rods in a practical manner, suitable for both improved commercial applications and spaceflight instruments. Auxiliary excitation at frequencies near twice that of the fundamental quadrupole RF frequency provides the advantages of previously studied parametric excitation techniques, but with the added benefit of increased sensed excitation amplitude dynamic range and the ability to operate voltage scan lines through the center of upper stability islands. Using a field programmable gate array, the amplitudes and frequencies of all QMS signals are digitally generated and managed, providing a robust and stable voltage control system. These techniques are experimentally verified through an interface with a commercial Pfeiffer QMG422 quadrupole rod system. When operating through the center of a stability island formed from higher order auxiliary excitation, approximately 50% and 400% improvements in 1% mass resolution and peak stability were measured, respectively, when compared with traditional QMS operation. Although tested with a circular rod system, the presented techniques have the potential to improve the performance of both circular and hyperbolic rod geometry QMS sensors.

Parallel-coupled dual racetrack silicon micro-resonators for quadrature amplitude modulation

A parallel-coupled dual racetrack silicon micro-resonator structure is proposed and analyzed for M-ary quadrature amplitude modulation. The over-coupled, critically coupled, and under-coupled scenarios are systematically studied. Simulations indicate that only the over-coupled structures can generate arbitrary M-ary quadrature signals. Analytic study shows that the large dynamic range of amplitude and phase of a modulated over-coupled structure stems from the strong cross-coupling between two resonators, which can be understood through a delicate balance between the direct sum and the "interaction" terms. Potential asymmetries in the coupling constants and quality factors of the resonators are systematically studied. Compensations for these asymmetries by phase adjustment are shown feasible.