Dyeing Research Articles

Eco-Friendly Simultaneous Estimation of Ponceau 4R and Carmoisine Employing an Analytical Quality by Design-Aided RP-HPLC Method in Commercial Food Samples Utilizing a Green Ultrasound-Assisted Extraction Technique.

Ponceau 4R (E124) and carmoisine (CMS; E122) are frequently utilized azo synthetic dyes in the food industry owing to their aesthetically pleasing coloration and broad consumer acceptability. It is imperative to prioritize environmentally favorable technologies for quantifying these dyes, as excessive consumption of these poses significant health risks. The primary objective of this research was to establish a reversed-phase (RP)-HPLC method that could simultaneously detect Ponceau 4R and CMS, implementing green analytical chemistry (GAC) and analytical quality by design (AQbD), using an ultrasound-assisted extraction (UAE) technique in commercial food samples. An Agilent Eclipse Plus column (C18, 250 × 4.6 mm id, 5 µm) was utilized for effective separation with a mobile phase of ethanol-acetate buffer pH 5 (60:40, v/v), flow rate of 1 mL/min, and detection wavelength of 515 nm. Critical variables selected for method optimization were ethanol percentage and flow rate, determined using central composite design (CCD). In order to adhere to the 12 principles of green chemistry, hazardous solvents were substituted with ethanol, which is distinguished by its ease of use, effectiveness, and ecological sustainability. The greenness assessment was conducted utilizing the green analytical procedure index (GAPI), analytical eco-scale (AES), and analytical greenness metrics (AGREE). The respective retention times for Ponceau 4R and CMS were 2.276 and 3.450 min. The recovery rate of Ponceau 4R and CMS fluctuated between 70% and 102% and 80% and 102%, respectively, across various marketed food samples. The procedure passed validation in accordance with the International Conference on Harmonization Q14 guidelines. The devised method demonstrates that the validation parameters like linearity, precision, sensitivity, and reproducibility are within the specified limits of ICH guidelines. The greenness assesment tools GAPI, AES, and AGREE produced the most favorable results. In future, environmentally sustainable, solvent-based, robust AQbD methodologies for assessing varieties of food colorants may be adopted and improved commercially.

Combined advanced oxidation dye-wastewater treatment plant: design and development with data-driven predictive performance modeling

The recalcitrant nature of the industrial dyes poses a significant challenge to existing treatment technologies due to the stringent environmental regulations. This combined with the inefficiency of a single treatment method has led to the implementation of the combination of primary, secondary, and tertiary treatment processes, which fails during complex secondary aeration processes due to variable pH loads of industrial effluent wastewater. This article presents a modified design methodology of a pilot-scale micro-pre-treatment unit using a solar-triggered advanced oxidation process reactor that both effectively controls the influent variability at the source and mitigates textile effluents for making the discharge reusable for different industrial purposes. The proposed modified combination technique of controlled serial processes inclusive of primary, secondary, and tertiary treatment steps with ZnO/ZnO-GO NanoMat-based advanced oxidation process demonstrates complete remediation of industrial grade effluent with effective reuse of the discharge. Further, a reliable prediction model for estimating water quality parameter using machine learning models are proposed. Multi-linear regression and Artificial Neural network modeling provide simple, accurate, and robust prediction capabilities, which are evaluated for the efficiency of the processes. The generated prediction models capture the output parameters within an acceptable level of accuracy (Radj2>0.90)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$({{\\boldsymbol{R}}}_{{adj}}^{{\\bf{2}}}\\, >\\, 0.90)$$\\end{document} and allow compliance with the discharge Inland Water Discharge Standards (IWDS).

Adjusting UV-Vis Spectrum of Alizarin by Insertion of Auxochromes.

First synthesized in 1868, alizarin became one of the first synthetic dyes and was widely used as a red dye in the textile industry, making it more affordable and readily available than the traditional red dyes derived from natural sources. Despite extensive both experimental and computational analyses on the electronic effects of substituents on the shape of the visible spectrum of alizarin and alizarin Red S, no previous systematic work has been undertaken with the aim to fine tune the dominant absorption region defining its color by introducing other electron-withdrawing or electron-donor groups. For such, we have performed a comprehensive study of electronic effects of substituents in position C3 of alizarin by means of a time dependent DFT approach. These auxochromes attached to the chromophore are proven to alter both the wavelength and intensity of absorption. It is shown that the introduction of an electron-donor group in alizarin causes the transition bands to be significantly red-shifted whereas electron-withdrawing groups cause a minor blue-shifting.

Multivariate optimization of organic matter and color removal from textile dyeing industry wastewater by ultraviolet-activated oxidants

This study investigated the efficiency of ultraviolet (UV) activation of the oxidants that are used in advanced oxidation processes in textile dyeing industry wastewater treatment with high concentrations of refractory organic matter and strong color. The effect of peroxymonosulfate (PMS), peroxydisulfate (PS), hydrogen peroxide (HP), percarbonate (PC), and chlorine as oxidants in UV-based processes was first evaluated. The two processes with the greatest removal efficiency were determined as UV/PS and UV/PMS. Then the operating parameters for UV/PS and UV/PMS were optimized by the Box-Behnken Design (BBD). Process parameters for both processes were oxidant dosage, initial pH, and reaction time whereas system responses were chemical oxygen demand (COD), UV254, and color removal efficiency. Under optimum conditions in the UV/PS process (pH 5.54, PS dosage 24.4 mM, and reaction time 117 min), COD, UV254, and color removal efficiency were 83.21 %, 92.14 %, and 93.87 %, respectively. Under optimum conditions in the UV/PMS process (pH 5.83, PMS dosage 23.1 mM, and reaction time 120 min), COD, UV254, and color removal efficiency were 66.89 %, 78.45 %, and 96.89 %, respectively. The R2 of all the models that applied for the system responses of both processes was nearly one and the adj R2 values were very near to the R2 values. These findings showed that the BBD is efficient, suitable, and significant in modeling the removal of pollutants in textile dyeing industry wastewater by UV/PS and UV/PMS processes. Electrical Energy per Order (EE/O) calculations for UV/PS and UV/PMS processes were 101 and 167 kWh/m3 for optimum conditions, respectively. The results showed that both UV/PS and UV/PMS processes are effective; however, the UV/PS process is more economical and effective concerning pollutant removal efficiency and EE/O calculations.

Chemical synthesis of ZnO, CuO, MnO and FeO Nano adsorbent and their application in anionic reactive blue turquoise 71 dye (RB-71 dye) and real effluents remediation: Batch adsorption and column studies

Industrial dye production chemicals contribute significantly to environmental pollution. This study explores the use of nanotechnology, specifically nano fertilizers and adsorption technology, for efficient removal of synthetic anionic dyes and enhancing agricultural production. Nano adsorbents (MnO, FeO, ZnO, and CuO) were generated using the co-precipitation method. Optimal conditions for Manganese oxide (MnO) were pH 2 (33.2 mg/g), dosage 0.01 g/50 mL, and adsorption capacity 77.2 mg/g. FeO optimal conditions were pH 2 (21.5 mg/g), dosage 0.01 g/50 mL, and qe 40.5 mg/g. CuO optimal conditions were pH 2 (28.2 mg/g), dosage 0.01 g/50 mL, and qe 71.3 mg/g. ZnO optimal conditions were pH 2 (25.4 mg/g), dosage 0.01 g/50 mL, and qe 64.2 mg/g. Pseudo 1st order and Freundlich sorption isotherms were best-fit models. Endothermic reactions were observed, indicating the sorption process’s nature and feasibility. Electrolyte concentrations affected the sorption potential. Surfactants/detergents reduced sorption efficiency. 0.5 N NaOH proved most effective for desorption. In column studies, optimal conditions for acidic RB-71 dye sorption were 3 cm bed height, 1.8 mL/min flow rate, and 70 mg/L inlet dye concentration. Metal oxide showed exhibited crystal and polymorphs structure. FT-IR spectra depicted metal-oxide peaks between 400 and 899 cm−1. SEM micrograph reveals a spherical shape with an approximate size of 10–50 μm. The adsorption method’s novelty lies in its easy handling, eco-friendliness, and cost-effectiveness, making it a promising technology for practical-scale application in addressing dye pollution.

Extraction and purification techniques of the bio-catalyst cabbage peroxidase enzyme to remove reactive dyes and bisphenol-A pollutants

The industrial dyes and phenols resulting from various industries have a devastating impact on human health and the ecosystem when they enter the food chain, making it necessary to research effective and sustainable treatments. This study informs a novel resource of peroxidase, extracted from discarded cabbage stems purchased from restaurant garbage to use as a biocatalyst treatment. The research focused on comparing the effectiveness of crude and purified enzymes for biodegrading dyes and bisphenol-A. The purification fold for Cabbage legs peroxidase (CLP) was 2.14 with a 39 % yield. At pH 6 and 40 °C the optimum activity of the enzyme was observed, and from its initial activity, the retention is 65% at 60 °C. The (CLP) has been assessed by determining the Michaelis-Menten constant Km value for pyrogallol and H2O2, which were found to be 0.78 mM and 0.047 mM, respectively. For RB49 and RG19 the percentage decolorization was 86% and 78%, respectively after 10-h incubation. The pure enzyme concurrently displayed 79% and 75% decolorization percentages for RB49 and RG19 at the same time and conditions. The crude enzyme demonstrated outstanding effectiveness in removing pollutants. The results indicate that (CLP) holds a promising potential for environmental remediation and bioengineering problems.

Exploring the photocatalytic degradation of organic textile dye using hydrothermally synthesized Ce-doped metal chalcogenide nanomaterial

The advancement of economical, facile and non-toxic approaches towards waste water treatment is a promising research area currently among scientific community. In this regard photocatalysis has specifically received significant attention due to its application in the eradication of toxic elements from wastewater. Hence, in the present study Ce-doped FeSe2 photocatalysts were prepared employing the simple, inexpensive and ecofriendly hydrothermal method. The prepared Ce-FeSe2 nanomaterial was subjected to different characterization techniques like x-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), Cyclic Voltammetry (CV) and UV–visible spectroscopy to explore the characteristic properties of the prepared nanomaterials. XRD results revealed good crystallinity and purity of all synthesized Ce-FeSe2 nanomaterials. Surface morphology and elemental composition of the prepared nanomaterials was determined by FE-SEM and EDS spectroscopy. UV-Visible spectroscopy was used to explore the optical characteristic of the prepared photocatalysts. The results of optical absorption spectrum confirmed that increasing dopant percentage shows an improvement towards optical properties. The photocatalytic ability of the prepared Ce-FeSe2 nanomaterials was examined against the potentially toxic industrial dyes like Rhoadmine B (RB). The photocatalytic results show that 95.21% of dye degradation was exhibited by 7% Ce- doped FeSe2 nanomaterial under UV-visible light illumination duration of 120 min. Findings of the photocatalytic degradation process fitted well with pseudo first order reaction kinetics for RB dye.

High Recovery of Ceramic Membrane Cleaning Remediation by Ozone Nanobubble Technology.

The persistent issue of ceramic membrane fouling poses significant challenges to its widespread implementation. To address this concern, ozone nanobubbles (ozone-NBs) have garnered attention due to their remarkable mass transfer efficiency. In this investigation, we present a novel ozone-NB generator system to effectively clean a fouled ceramic membrane that is typically employed in the dye industry. The surface characteristics of the ceramic membrane underwent significant alterations, manifesting incremental changes in surface roughness and foulant accumulation reduction, as evidenced in atomic force microscopy, scanning electron microscopy, X-ray fluorescence, and energy-dispersive spectroscopy. Remarkably, the sequential 4 h cleaning process demonstrates an effective outcome leading to an almost 2-fold enhancement in the membrane flux. The initial fouled state of 608 L/h/m2 increased to 1050 L/h/m2 in the 4 h state with a recovery of 50%. We propose such membrane performance improvement governed by the ozone-NBs with a size distribution of 213.2 nm and a zeta potential value of -20.26 ± 0.13 mV, respectively. This effort showcases a substantial innovative and sustainable technology approach toward proficient foulant removal in water treatment applications.

Cloning and characterization of FMN-dependent azoreductases from textile industry effluent identified through metagenomic sequencing

ABSTRACT Azo dyes, when released untreated in the environment, cause detrimental effects on flora and fauna. Azoreductases are enzymes capable of cleaving commercially used azo dyes, sometimes in less toxic by-products which can be further degraded via synergistic microbial cometabolism. In this study, azoreductases encoded by FMN1 and FMN2 genes were screened from metagenome shotgun sequences generated from the samples of textile dye industries’ effluents, cloned, expressed, and evaluated for their azo dye decolorization efficacy. At pH 7 and 45°C temperature, both recombinant enzymes FMN1 and FMN2 were able to decolorize methyl red at 20 and 100 ppm concentrations, respectively. FMN2 was found to be more efficient in decolorization/degradation of methyl red than FMN1. This study offers valuable insights into the possible application of azoreductases to reduce the environmental damage caused by azo dyes, with the hope of contributing to sustainable and eco-friendly practices for the environment management. This enzymatic approach offers a promising solution for the bioremediation of textile industrial effluents. However, the study acknowledges the need for further process optimization to enhance the efficacy of these enzymes in large-scale applications. Implications: The study underscores the environmental hazards associated with untreated release of azo dyes into the environment and emphasizes the potential of azoreductases, specifically those encoded by FMN1 and FMN2 genes, to mitigate the detrimental effects. The study emphasizes the ongoing commitment to refining and advancing the enzymatic approach for the bioremediation of azo dye-containing effluents, marking a positive stride toward more sustainable industrial practices.

Irradiation Time Optimization on Photocatalytic Activity of Nanoparticles MgO from Dolomite Bangkalan

Dolomite is a type of sedimentary rock material that is often found in the Bangkalan Madura area. This dolomite has a higher MgO compound content than in the other areas, namely 40 %, but its utilization has only been as fertilizer and building materials. For this reason, this research aims to determine the characteristics of MgO nanoparticles and their application in photocatalytic with visible light irradiation. The synthesis of MgO nanoparticles used the hydrochloric acid leaching method, and the results were characterized by X-ray diffraction, Fourier transform infrared, Scanning electron microscopy, Transmission electron microscopy, Raman spectroscopy, Photoluminescence, and Ultraviolet-visible spectroscopy. The results showed that the synthesized MgO nanoparticles had a periclase phase and were shaped like a spherical cube with an average nanoparticle size of 27 nm and an energy gap of 3.9 eV. The optical properties of the MgO nanoparticles showed quite strong luminescence at a Raman shift of 1,087.36 cm−1, which was associated with the type of vibrational waves in the atomic lattice, and there were surface defects on the surface of the MgO nanoparticles, namely in the emission spectra of 720.06 and 740.39 nm originating from oxygen vacancies (F-center) and Mg vacancies (V-center). The photocatalytic activity of MgO nanoparticles in visible light showed the optimum time to degrade 30 ppm methylene blue dye in 360 min and yielded a degradation percentage of 99 %. Therefore, MgO nanoparticles could be used for processing industrial dye waste using visible light. HIGHLIGHTS The synthesis of MgO Nanoparticles from Bangkalan dolomite used the hydrochloric acid leaching method The presence of nanocrystallite size, crystal defects, and oxygen vacancies in MgO nanoparticles can increase photocatalytic activity MgO nanoparticles can degrade methylene blue dye with an optimum time of 360 minutes under visible light irradiation GRAPHICAL ABSTRACT

Facile bio-inspired synthesis of polysaccharide-mediated zinc oxide nanoparticles and their efficient antimicrobial and photocatalytic activity

BackgroundGreen synthesis for nanomaterials, an eco-friendly and sustainable technology, has gained prominence in recent decades, especially in dye removal. The widespread use of toxic organic dyes in various industries has become a significant concern for human health, mainly when these dyes contaminate wastewater. This current study focuses on the prevalent use of hazardous dyes, known for their ecotoxicity, and the challenge of effectively removing these pollutants from wastewater. AimThe primary goal is to achieve a bio-inspired synthesis of zinc oxide nanoparticles using polysaccharides as mediators. This synthesis is designed to enhance the antimicrobial attributes of the nanoparticles and facilitate the photocatalytic degradation of organic dyes. Notably, polysaccharides serve a dual purpose as both a reducing and stabilizing agent for synthesizing ZnO nanoparticles. Significant findingsThe XRD distinctive lattice pattern peaks, such as (1 0 0), (0 0 2), and (1 0 1), affirmed the pure formation of the ZnO structure with a hexagonal wurtzite crystal structure. The chemical composition and product purity of green-produced SB-ZnO NPs were assessed through SEM and XPS analysis. The study then utilized polymer-mediated green-synthesized ZnO NPs for the photocatalytic degradation of Congo red and crystal violet under visible light irradiation. The results demonstrated remarkable photocatalytic activity, with around 88.2% of Congo red dye degradation observed within 80 min of visible light exposure. Notably, Congo red exhibited higher catalytic efficiency compared to crystal violet dye. The antimicrobial activity of SB-ZnO NPs obtained through green synthesis was also investigated. The antimicrobial study revealed the formation of zones against both gram-positive and gram-negative bacterial pathogens. These bioassay metal oxides are recognized for their potential in environmental remediation due to their low cost, stability, efficiency, and minimal environmental impact. The enhanced photocatalytic efficiency of polymer-metal nanocomposites shows significant potential in propelling the utilization of photocatalysts for environmental applications, specifically in wastewater treatment and bactericidal processes.

Ameliorative effects of thymoquinone on the caspase 3, kidney function and oxidative stress tartrazine-induced nephrotoxicity

First in the literature this study aimed to investigate the effects of Tartrazine, a common industrial food dye, on kidney and whether Thymoquinone has a protective effect in tartrazine-induced nephrotoxicity. The study conducted on the rats bred at İnönü University Experimental Animals Production and Research Center. Wistar albino rats were randomly divided into 4 groups, where each group included 8 rats: control, Tartrazine, Thymoquinone, and Tartrazine + Thymoquinone groups. The experiments continued for 3 weeks and then, kidney tissues and blood samples were collected from the rats under anesthesia. Malondialdehyde (MDA), super oxidized dismutase (SOD), total oxidant status (TOS), increase in Oxidative stress index (OSI), glutathione (GSH), Glutathione peroxidase (GSH-Px), catalase (CAT), Total antioxidant status (TAS) levels decreased in the kidney tissues collected from the tartrazine group. Serum Bun and Creatinine levels increased in the tartrazine group. Tartrazine administration damaged and degenerated the glomeruli and cortical distal tubes in the histopathology of kidney tissues, also different degrees of inflammatory cell infiltration were observed in the renal cortex and medulla. Thymoquinone and tartrazine administration improved both biochemical and histopathological parameters. Tartrazine administration induced nephrotoxicity. This could be observed with the increase in oxidant capacity and the deterioration of kidney functions. Thymoquinone was observed to demonstrate strong antioxidant properties. Thymoquinone could be used primarily as a protective agent against Tartrazine-induced toxicity.

Nitrogen and sulfur-doped biochar supported magnetic CuZnFe2O4 as a sustainable adsorbent for efficient reactive black dye 5 removal from industrial wastewater

AbstractThe shortage of clean and safe water resources, due to the growing pollution and the high cost of water treatment techniques, has become a real threat. Herein, CuZnFe2O4@N,S-doped biochar (CZF@N,S-BC), a novel magnetic, cleaner, and completely green-based composite, was fabricated using the aqueous extract of Beta vulgaris (sugar beet) leaves for the efficient removal of reactive black dye 5 (RB5) from industrial wastewater discharge. With the aid of numerous techniques, including Fourier-Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Spectroscopy (SEM), Vibrating Sample Magnetometer (VSM), and zeta potential analyses, CZF@N,S-BC was well-characterized. The results revealed the successful fabrication of CZF@N,S-BC with good magnetic saturation of 12 emu/g and a highly positively charged surface of 32 mV at pH 2. The removal efficiency of RB5 was reached 96.5% at equilibrium time 60 min, and adsorbent dose of 80 mg. The equilibrium data fitted well with the Freundlich isotherm model, while the adsorption kinetics followed a pseudo-second-order model (PSO), with a maximum adsorption capacity of 276.57 mg/g. The thermodynamics results confirmed the physical interaction between the composite and RB5. Additionally, the composite also demonstrated exceptional reusability, maintaining a removal efficiency of 57.27% even after six consecutive cycles. To evaluate the performance of CZF@N,S-BC composite in a real water matrix, the composite was subjected to remove RB5 from a real wastewater sample obtained from an industrial discharge of a textile dyeing industry. Also, a plausible mechanism of RB5 removal by the composite was intensively discussed using XPS before and after adsorption.

Synthesis and characterizations of conocarpus- and azadirachta-derived activated carbons as wastewater recycling material.

Water being the most important fluid supporting the life as well as industry is getting sparse and polluted day by day. Activated carbon (AC) can be utilized in various applications of significant environmental impact and sustainable living such as carbon dioxide sensing and capturing, air purification, and water recycling. However, in the wake of the recent corona pandemic which resulted in global lockdown and took the entire world by shock, a cost-effective and simple synthesis of such a useful material remains dire need of time. Therefore, this paper describes a simple and cost-effective synthesis of activated carbon (AC) of high porosity and surface area derived from the pruning of conocarpus and azadirachta trees. In reference to the study under consideration, alongside numerous others, a furnace was employed to synthesize activated carbon. However, our approach utilized a more conventional methodology wherein the environmental parameters were not optimized. In furnace-based procedures, factors such as temperature, pressure, and humidity are meticulously regulated, contrasting with the conventional methodologies where such parameters lack optimal control. Consequently, employing a furnace does not constitute a cost-effective approach for the physical activation of organic samples thus proving a furnace is not imperative for physical activation. The synthesis was carried out by physical activation in the form of carbonization followed by chemical activation with potassium hydroxide (KOH). The influence of activated carbon from each pruning over filtration of water containing industrial dye was investigated. Activation temperature and impregnation ratio of 600-800°C and 1:5 were selected respectively. X-ray diffraction patterns (XRD) for all AC samples indicted the appearance of broad peaks at 2θ value of 20-30° which confirms the presence of carbon in the sample. The physical morphology arrangement by SEM analysis showed uneven arrangement of pores of conocarpus which indicated higher iodine number and hence higher adsorption capacity of 442.13mg/g.

Study of the dyeing industry pollution after mandatory installation of ETP in Madhabdi municipality, Bangladesh

ABSTRACT Madhabdi municipality of the Narsingdi district of Bangladesh, the “Manchester of the East,” is famous for its cloth market and fabric dyeing industries. The untreated effluent discharge has been mixed with the water and soil, degrading the environmental standards of this area for years. Installing an effluent treatment plant (ETP) in all textile industries in Bangladesh is mandatory. This study evaluates the soil condition, surface water quality, and heavy metal contamination in cultivated vegetables after the compulsory installation of ETP. Soil and water samples from eight locations and cultivated vegetable samples from three locations are collected and analyzed for this study. The pH, EC (electric conductivity), TDS (total dissolved solids), DO (dissolved oxygen), and heavy metal concentrations are observed. The water quality index, contamination index, metal evaluation index, pollution load index, and metal pollution index are calculated from the collected samples. The study found that the physico-chemical properties of water pH (9.19), EC (2232.38 µScm-1), and DO (0.79 mgL-1) violate the national standards. The mean TDS is below the maximum permissible level. The heavy metal concentrations of Cr and Pb in water are 1.03 and 0.13 mgL-1, crossing the permissible limit, respectively, but Mn, having 0.89 mgL-1, is within the limit. The water quality is unsuitable for domestic and agricultural use, contamination is “medium,” and metal evaluation is “medium.” The soil is alkaline, having a pH of 8.58. The soil’s Cr, Pb and Mn concentrations are 68.21 µgg-1, 52.73 µgg-1and 805.16 µgg-1, respectively. The soil contamination level is low to moderate. Cultivated leafy vegetables have a concentration of Cr, Pb and Mn; 2.61 µgg-1, 0.30 µgg-1and 288.67 µgg-1, respectively, where Cr has crossed, Pb is within, and Mn is lower than the permissible limit. Produced vegetables have high (12.10–33.09) MPI (metal pollution index) and are at a high-risk level for consumption as food.

Influence of medium and gelling agents concentration on in vitro rooting of Polygonum tinctorium

Polygonum tinctorium has long been employed in the medical and dye industries in many nations, particularly in Korea and Japan, for traditional fabric staining as a source of blue color. The plant tissue culture method has proven to be a rapid and sustainable approach for the regeneration of various plant species, particularly those with medicinal or ornamental value. In this study, we explored the in vitro root regeneration and growth of P. tinctorium in response to different growth media and gelling agents. Among the tested media, Schenk and Hildebrandt medium (SH medium) demonstrated superior performance, resulting in the highest number and length of roots per explant. SH media produced about 53 and 18% higher root per explant and a 40% and 14% increase in root length compared to B5 and MS media, respectively. Half strength of SH medium proved to be the optimal condition for both root number (7.46 roots per explant) and root length (3.81 mm). Among the gelling agents, 2 g/L of Gelrite medium was most effective in promoting the highest and tallest roots. These findings have the potential to enhance rooting abilities in various crops, particularly in the case of medicinal and ornamental plants, and may offer valuable insights for future industrial-scale root production of P. tinctorium.

Fenton-mediated solar-driven photocatalysis of industrial dye effluent with polyaniline impregnated with activated TiO2-Nps

Various integrated technologies have been investigated for the remediation of heavily polluted industrial dye effluent. Also, more than 70 % of these dyes are known to be solely azo dyes used in the textile industry with 5–30 % presence in the effluent as loose dye molecules which are recalcitrant to treatment. These challenges led to the investigation of energy-efficient processes (solar) and the fabrication of high-performance nano-photocatalysts for proficient photocatalysis of dye effluent while mediating the process with Fenton reagents. The study fabricated nanopolymeric catalyst composites (P-AKT) via novel in situ coupling and impregnation of the polyaniline (PANI) with surface-activated TiO2 NPs. This fabrication is aimed at developing a high-performance catalyst with rapid and proficient photocatalytic activities to photons from sunlight irradiation. The photocatalytic process was mediated using a novel Fenton reagent to enhance the generation of radical species for dye degradation. Various instrumental characterization methods were used to study the structural, molecular, elemental, functional and optoelectronic properties of the fabricated nanocomposite photocatalysts. The result reveals functional groups aiding dye-catalyst bonding and morphological interaction reveal a surface-activated tetragonal crystalline mixture of anatase and rutile from TiO2−Nps embedded in the macromolecular chain of PANI. It also reveals the optimal conditions of 20 mg dosage, 10 mg/L initial concentration with substantial effectiveness at pH of 5 and 7. However, the most efficient photocatalyst recorded was P-AKT-2 % and P-AKT-3 % having 95 % and 94 % efficiencies at 90 min of solar irradiation. The photocatalyst equally demonstrated its capacity for effluent treatability up to 4 cycles of use.

Smart nanocomposites: Harnessing magnetically recoverable MWCNT-CF for efficient organic dyes reduction in water quality monitoring applications

The accelerating use of organic dyes in various industries has led to a surge in water pollution, especially from non-biodegradable dye effluents discharged into water resources. This study addresses the critical issue of catalyzing the reduction of two prevalent dyes, methylene blue (MB) and rhodamine-B (RhB), using a multiwalled carbon nanotube-cobalt ferrite (MWCNT-CF) nanocomposite. The synthesized nanocomposite demonstrates exceptional catalytic activity, stability, and recyclability. Conventional methods for treating dye-containing wastewater often prove expensive. This study explores the efficacy of catalytic reduction, a relatively fast process facilitated by semiconductor nanoparticles. Structural analyses using X-ray diffraction and high-resolution transmission electron microscopy (HRTEM) confirm the formation of the nanocomposite, revealing unsaturated surface bonds and chains conducive to adsorption. The nanocomposite exhibits a remarkable reduction in both dyes, with easy recyclability for multiple cycles. Magnetization studies confirm the ferrimagnetic nature of the nanocomposite, facilitating its efficient separation from the reaction mixture using a magnet. The study delves into the kinetics of the catalytic reduction following pseudo-first-order kinetics. The surface modifications of the nanocomposite, as revealed by TEM, contribute to enhanced adsorption and catalytic efficiency. Notably, the MWCNT-CF nanocomposite demonstrates negligible loss of catalytic activity during recycling, highlighting its potential for cost-effective and sustainable applications in dye reduction across various industries.

Extraction of organic pigments from tomato (Solanum lycopersicum L.), turmeric (Curcuma longa L.) and red amaranth (Amaranthus tricolor L.) for safe use in agro-products

The utilization of synthetic dyes in food industries is a great concern for food safety and health issues. So, natural pigments can be an excellent substitute for synthetic dyes and also health-friendly for consumers. In the experiment, natural pigments were extracted from tomato (Solanum lycopersicum L.), turmeric (Curcuma longa L.) and red amaranth (Amaranthus tricolor L.). Then the stability and consumer acceptance of the extracted pigments were examined. The highest amount of pigment was extracted from turmeric (2.14 ± 0.30 %) with ethanol solvent, followed by tomato (0.67 ± 0.06 %) with hexane: acetone (1:1) solvent, and red amaranth (0.78 ± 0.05 %) with acetone solvent. Turmeric pigment showed the highest stability in high temperatures and light exposure. All of the pigments were highly stable in a neutral environment; however, tomato pigment showed the highest stability index (84.33 ± 2.52) at pH 3.0, but turmeric pigment showed the highest stability (91.67 ± 1.53) at pH 5.0. The simple preference test revealed that the use of turmeric pigment in boiled rice had the highest acceptance rate, and in terms of taste and flavor, red amaranth pigments in ice cream. So turmeric pigment can be utilized in high-temperature processing and/or acidic foods, but tomato and red amaranth pigments might be in low-temperature processing foods such as the ice-cream and soft drinks processing industry.

Isolation and Identification of Pigment-Producing Endophytic Fungi from the Amazonian Species Fridericia chica.

Pigments of fungal origin have aroused increasing interest in the food dye and cosmetic industries since the global demand for natural dyes has grown. Endophytic microorganisms are a source of bioactive compounds, and Amazonian plant species can harbor fungi with a wide range of biotechnological applications. Popularly known in Brazil as crajiru, Fridericia chica is a medicinal plant that produces a red pigment. In this study, a total of 121 fungi were isolated in potato dextrose agar from three plants. We identified nine pigment-producing endophytic fungi isolated from branches and leaves of F. chica. The isolates that showed pigment production in solid media were molecularly identified via multilocus analysis as Aspergillus welwitschiae, A. sydowii, Curvularia sp., Diaporthe cerradensis (two strains), Hypoxylon investiens, Neoscytalidium sp. (two strains) and Penicillium rubens. These isolates were subjected to submerged fermentation in two culture media to obtain metabolic extracts. The extracts obtained were analyzed in terms of their absorbance between 400 and 700 nm. The pigmented extract produced by H. investiens in medium containing yeast extract showed maximum absorbance in the red absorption range (UA700 = 0.550) and significant antioxidant and antimicrobial activity. This isolate can thus be considered a new source of extracellular pigment.