Dual Antenna Research Articles

Dual magnetoelectric antenna array with enhanced bandwidth and sensitivity for low-frequency communications

The magnetoelectric coupling effect demonstrated immense potential for miniaturizing antenna applications. However, due to the resonant nature of magnetoelectric (ME) antennas, their bandwidth tended to be relatively narrow. To address this limitation, our study introduced an array design based on coupled ME antennas. A tri-layer FeGa–PZT8–FeGa laminate structure was employed to construct the ME antennas, which utilized inter-array coupling to broaden the frequency range. Both the central frequency and sensitivity of the array structure were theoretically analyzed, and two methods for extending the frequency were proposed. By coupling two ME antennas of similar frequency in the series mode, the arrayed ME antennas exhibited enhanced sensitivity, increasing from 0.225 and 0.247 to 0.413 mV/nT, and an expanded bandwidth from 0.92–1.03 to 1.4 kHz, indicating improved performance through combined configuration. On the other hand, by coupling two ME antennas of different frequencies together in the series mode, a dual-frequency (97.8/98.97 kHz) ME antenna array was formed. The communication capabilities of the ME antenna array under weak magnetic fields were demonstrated using amplitude shift keying and frequency shift keying modulation methods. The designed array of ME antennas elevated low-frequency communication performance and possessed excellent magnetic field detection capabilities, thereby offering a cost-effective technological pathway for bioelectronic and marine communication design.

A Full-Duplex Dual Wideband Horn Antenna With High Port-to-Port Isolation

A Full-Duplex Dual Wideband Horn Antenna With High Port-to-Port Isolation

Symmetric CRLH-TL filter based dual band microstrip antenna design approach

This paper presents a novel filter-based analysis for the conventional rectangular patch antenna (RPA) using the Composite Right/Left-Handed Transmission Line (CRLH-TL) theory. We introduce two circuit models for RPA, described by lumped components and transmission line (TL) elements. An RPA is considered a Symmetric CRLH-TL (SCRLH-TL). We validated the analysis by comparing the circuit model and full-wave analysis simulation results. The TL circuit model error in the full-wave analysis was less than 5%. A dual-band Zeroth-Order Resonant (ZOR) antenna is designed and manufactured based on the introduced Lumped element circuit model, which exhibits filtering characteristics in both bands. We obtain the antenna circuit model by incorporating the RPA lump circuit model with LC resonators. We implemented the antenna structure by combining the RPA and complementary split-ring resonators (CSRR) modeled by the LC resonators. We initialized the antenna center frequency bands for WiMAX 2.45 GHz and 3.60 GHz. The CSRRs control the configuration of the center frequencies. The simulation and measured results are in good agreement. The proposed antenna dimensions are 0.66×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document}0.66×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document}0.012 λg\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\lambda _g$$\\end{document} at 2.45 GHz (43.22×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document}43.22×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document}0.81 mm3). The measured gains are 3.47 dB and 4.64 dB for 2.45 GHz and 3.60 GHz, respectively. Two radiation nulls were observed at 2.09 GHz and 2.98 GHz for the 2.45 GHz band and one radiation null at 3.45 GHz for the 3.60 GHz band. Also, the fractional bandwidth is 4.03% and 1.39%, respectively. The radiation pattern is nearly omnidirectional. The simulated efficiency is 90% for 2.45 GHz and 87% for 3.60 GHz frequency bands.

Performance prediction of a closely spaced dual port dual-band silicon-graphene antenna with high isolation for THz wireless applications using a machine learning algorithm

This article explains the design and optimization of a twin port silicon-graphene radiator in the THz frequency regime. The suggested radiator’s primary attributes are: 1) a plus-formed slot produces dual radiating mode (HEM11δ and HEM12δ) inside the ceramic; 2) the presence of an absorber wall in between the twin port blocks the radiation between the ports and raises the separation level to above 35 dB as well; 3) using a graphene sheet over ceramic and metasurface (MS) provides the tunability in the proposed radiating structure; and 4) machine learning procedures, i.e., ANN and random forest, help to predict the expected S-parameters of the planned antenna. Actual (HFSS/CST software) and projected values (using the ML algorithm) confirm that the design radiator works effectively in the twin working spectrum, i.e., 3.3–3.98 and 4.9–5.45 THz. A good value of the far-field and MIMO parameters confirms its applicability in THz-built biomedical uses.

Multifunctional Double Band Mesh Antenna with Solar Cell Integration for Communications Purposes

A dual band flexible antenna based on a circularly polarized modified meshed patch antenna design. This article focuses on some of the most pressing issues in small satellite applications. The antenna optimization and improvement of antenna performance, such as radiation efficiency. As is well known, circular polarization is immune to the Faraday rotation effect in the ionosphere and can thus prevent a 3-dB loss in geo-satellite communication. With the use of the software program Computer Simulation Technology (CST), the proposed circularly polarized modified meshed patch antenna has been created. Therefore, this article also presents a modified design of a circularly polarized meshed patch antenna to reduce the complexity of the antenna and decrease the size as much as it is capable. However, a meshed patch antenna can support a high communication data rate. The antenna architecture will theoretically be consistent with the installation of solar panels. The antenna utilizes a conductive copper as the core material and the substrate using flexible polyimide. The design antenna is very small, having an overall size of 30 * 30 mm when compared to other conventional non-transparent antenna operating at the same frequencies of 2.6, 3.5 GHz. The antenna that is proposed involves two meshed patch elements of same size but in various shapes. Finally, the proposed antenna is integrated into a solar cell by using the amorphous silicon thin film.

An approach to determine pathological breast tissue samples with free‐space measurement method at 24 GHz

AbstractPathology is an important branch of science in the diagnosis and treatment of several diseases. In cancer diseases, serious investigations have been made about the course of the diseases. A report that is essential for both the patient and the doctor is prepared by the pathologists as a result of a detailed cellular examination. These reports contain information about the disease. Access duration to these reports, which affects the form and duration of the treatment, is extremely important today. It is possible to shorten this period with systems using antenna technologies. The pathological breast tissue samples have been examined by using horn antenna structures with high gain in this study. Dual identical horn antennas have been placed opposite each other as receivers and transmitters in the measurement setup at 24 GHz. Measurements of normal and cancerous breast tissues have been made, and the normalization process has been applied to the measured scattering parameters. The different values between normal and cancerous breast tissues have been shown with this process. The normalized values are compared with other analyzed values. According to the results obtained, the percentage of normalized values for transmission is much more effective and meaningful than other results.

Four‐port dual CP MIMO antenna with enhanced isolation for 5G applications

SummaryIn this paper, a 4 × 4 MIMO (multiple‐input multiple‐output) antenna with metasurface (MS), which is composed of dual circularly polarized (CP) patch antennas, is proposed for 5G (sub‐6 GHz) applications. The MIMO antenna consists of four microstrip patch antennas. In order to improve the isolation of the MIMO antenna, parasitic elements are placed on the MS and layer of patch antennas. In addition, a substrate‐integrated waveguide (SIW) structure is used at the center of the MIMO antenna for this purpose. The proposed MIMO antenna is fabricated for validation tests. The antenna has overall dimensions of 115 mm × 115 mm × 3.2 mm (1.219 × 1.219 × 0.033 , where is the free space wavelength at the lowest operating frequency in 10‐dB impedance bandwidth). The MIMO antenna has 10‐dB impedance bandwidth (IBW) from 3.3 to 3.8 GHz (14.08%), 3‐dB axial ratio bandwidth (ARBW) from 3.42 to 3.69 GHz (7.59%), and 6.36‐dBi peak gain. The isolation is greater than 28.14 dB in the n78 frequency band (3.3–3.8 GHz).

Design of a High Order Dual Band MIMO Antenna with Improved Isolation and Gain for Wireless Communications

Design of a High Order Dual Band MIMO Antenna with Improved Isolation and Gain for Wireless Communications

Novel metamaterial array-based dual port MIMO antenna using low profile substrate with feature multiband, and high isolation for sub-6G, IoT, and WiMAX applications

This article represents a single-layered two-port MIMO antenna loaded into a compact plane-patterned metamaterial (MTM) structure for a 5G communication system. The antenna operates at three bands to investigate metamaterial properties in addition to diversity parameters, an arrangement of a series of arrays suggested a 2-port design antenna and a circular-shaped split ring resonator unit cell was developed. The design of a single port antenna utilizes 1 × 3 MTM unit cells for each component. This antenna operates within a frequency range ranging from 1 GHz to 15 GHz. Additionally, the suggested MIMO antenna offers a dominant isolation of –55dB. The measurement’s results show that, with an entire antenna size of 112 mm × 26.5 mm and a 3.33 GHz bandwidth, the MIMO antenna is achieved with good efficiency and CCL < 0.35, considerable DG > 9.97dB, ECC < 0.18, and TARC <–9.97. The presented design is suitable for medical imaging, RFID, Bluetooth, Wi-Fi, WiMAX, IOT, satellite communication systems, and the 5G and sub-6 GHz spectrum.

Spoof surface plasmon Polaritons dual beam scanning antenna for 5G application

Dual beam scanning (DBS) antenna exited by two different spoof surface plasmon polaritons (SSPPs) transmission lines is proposed in this paper. The antenna is constructed by placing three rows of circular patches on both sides of two different planar SSPPs waveguide. These patches convert the SSPP guided waves into radiating waves. This simple single-layer antenna is characterized by dual without need to use switches or other complex configurations. It is designed to support application of several 5G sub-6 GHz bands (3.5 (n78) GHz, 3.7 (n77) GHz, and 4.5 (n79) GHz). The proposed antenna realizes the dual beam scanning by controlling the dispersion properties and field confinement along two different SSPPs transmission lines, based on different propagation constant. Numerical simulations are carried out by CST Microwave Studio and Ansys HFSS. These numerical simulations are verified by experimental results over the operating frequency band from 1 GHz to 6 GHz.

Design and Performance of Dual Band Microstrip Nano-Fractal Patch Antenna

Design and Performance of Dual Band Microstrip Nano-Fractal Patch Antenna

Dual band high tuning range frequency reconfigurable dielectric resonator antenna for sub-6 GHz applications

ABSTRACT A high-tuning range frequency reconfigurable dual-band compact cylindrical Dielectric Resonator Antenna (DRA) for 5 G Sub 6 GHz applications is presented in the proposed work. The work presented here provides compactness, frequency reconfigurability (FR), and dual-band. FR is obtained through two PIN diode switches, which operate in ON-ON, ON-OFF, OFF-ON, and OFF-OFF configurations and offer a maximum wide tuning range and a total spectrum of 44.44% and 71.49%, respectively. In the cylindrical DRA, the HE M 11 δ and HE M 12 δ modes create dual-band, while the hybrid structure and higher order mode excitation yield compactness.

Design of dual mode antenna using CMA and broadband dual-polarized antenna for 5G networks

This article proposes a dual mode dual-polarized antenna configuration for IRNSS and fifth generation (5G) applications, operating at a frequency of 3.5 GHz based on characteristic mode analysis (CMA), and aims to provide broadband dual-polarized functionality. The original design of the antenna is a traditional patch antenna, and its dual-polarized features are determined using characteristic mode analysis. The full-wave method is used to stimulate both orthogonal modes using a 50 Ω coaxial input line at 3.5 GHz. In this design, the circular patch has been extended into an elliptical patch through a process of mode separation. The circular patch exhibits resonance at a frequency of 2.5 GHz, whereas the extended elliptical radiator demonstrates two resonance modes at 2.5 GHz and 3.5 GHz. The operational mechanism is elucidated by modal analysis and characteristic angle. This antenna operates on two different frequencies at the 2.5 GHz IRNSS band with horizontal polarization and the 3.5 GHz 5G service with vertical polarization. The maximum gain achieved with these frequency ranges is 5.31 dBi and 4.72 dBi, respectively. A ring resonator is chosen to improve the axial ratio and impedance bandwidth of the suggested prototype. The antenna's ground plane is shaped like a rectangle and features a V-shaped slot in the radiating patch. The antenna's physical footprint is 50 mm × 50 mm × 1.6 mm and an FR4 dielectric substrate serves as its foundation. Through its interaction with a PIN diode, the diode modifies the polarization of the antenna. The antenna functions as a right-handed circular polarization (RHCP), when the diode is operational. The bandwidth from 4.3 to 7.5 GHz is covered. On the other hand, it generates linear polarization (LP) between 4.2 and 5.3 GHz. The experimental antenna is evaluated and examined for its performance characteristics. The simulations are carried out utilizing the CST simulator. A prototype antenna has been manufactured and its performance has been validated against simulated findings.

Performance analysis of microstrip patch antenna for wireless communication systems

&lt;p&gt;An antenna may be thought of as a temporary tool that directs radio waves for transmission or reception. Aside from being inexpensive, small, easy to manufacture, and compatible with integrated electronics, the microstrip patch antenna (MPA) offers several other benefits as well. These two methods are often seen as low-cost, adaptable, dependable, high-speed data connection choices that promote user mobility. An overview of how MPA have been used throughout the last several decades is provided in this article. It has been suggested that there are many approaches to enhance the performance of MPA, including the use of composite antennas, highly integrated antenna/array and feeding networks, operating at relatively high frequencies, and using cutting-edge manufacturing methods. Dual or multiband antennas are essential for meeting the demands of wireless services in this rapidly evolving wireless communication environment. Here is an overview of the patch antenna literature for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications.&lt;/p&gt;

Enhancement of Luminescence, Multiple-Sensing, and Differentiated Live-Cell-Imaging Properties of High-Nuclear Lanthanide Nanoclusters via the Zn(II)-Chelate-Controlled Dual Antenna Effect

Enhancement of Luminescence, Multiple-Sensing, and Differentiated Live-Cell-Imaging Properties of High-Nuclear Lanthanide Nanoclusters via the Zn(II)-Chelate-Controlled Dual Antenna Effect

2 × 2 MIMO dual spiral octagonal prism liquid DRA with snake-shaped DGS for OAM multiplexing.

In this paper, we proposed a 2 × 2 multiple-input multiple-output (MIMO) dual spiral octagonal prism liquid dielectric resonator antenna (DRA) with snake-shaped defective ground structure (DGS) for space multiplexing of orbital angular momentum (OAM). The DRA element adopts an inner and outer nested dual spiral structure filled with 0.035 g/ml of brine outside and a cylinder filled with distilled water inside. The proposed MIMO antenna can generate resonance at 1.78-3.02 GHz and 4.01-7.73 GHz (S11≤-10 dB). The isolation among ports is below -20 dB at 2.6 GHz and below -40 dB at 5.1 GHz, which can effectively isolate the l = ±1 and l = ±3 modes' OAM waves through the snake-shaped DGS. The proposed MIMO antenna improves spectral efficiency by OAM spatial multiplexing with l = ±1 and l = ±3 modes' OAM, which improves the data transmission efficiency. The proposed MIMO antenna provides a novel, to the best of our knowledge, solution for wireless communications to improve spectral efficiency.

A simulation study of dual band THz soft antenna for biomedical applications

The demand for multiband and high-gain THz antennas is escalating due to advancements in terahertz (THz) applications, particularly in biomedical conditions. An innovative fork microstrip antenna design has been introduced, operating at THz frequencies, providing multi-band capability, soft characteristics, and high-gain results. The recommended antenna utilizes a series-fed configuration with dual patch elements constructed on a polyethylene substrate, with a thickness of 0.0224 mm, a loss tangent of 0.001, and a permittivity of 2.25. The proposed antenna, with dimensions of 1 × 0.6 × 0.0224 mm³ in its maximum configuration and operating at 0.530 THz and 0.590 THz, exhibits a 10 dB return loss bandwidth of 13 GHz and 15 GHz, respectively. Notably, the realized antenna gain is simulated at 9.01 dBi and 9.53 dBi for their respective frequencies. To assess the antenna's flexibility, simulations are conducted with the antenna configured in bent positions, considering radii of 7 mm, 6 mm, and 5 mm. Furthermore, the study includes an examination of the specific absorption rate (SAR) to validate the suitability of this pliable antenna. The outcomes underscore the potential of the recommended antenna for flexible biomedical THz applications such as the detection of skin tumours and medical imaging.

Design and Optimization of Dual Port Dielectric Resonator Based Frequency Tunable MIMO Antenna with Machine Learning Approach for 5G New Radio Application

SummaryIn this article, a dual port Multiple Input Multiple Output (MIMO) cylindrical Dielectric Resonator (DR)‐based frequency tunable antenna with a machine learning (ML) approach for a 5G New Radio (NR) application is presented. According to the author's best knowledge, it is the first time‐frequency tunable MIMO hybrid DR with ML is reported. A dual port MIMO DRA is placed in the orthogonal configuration with the connected ground to obtain higher isolation in the entire frequency range. The proposed dual port antenna provides a total spectrum (TS) and tuning range (TR) of 98.99% and 80.93%, respectively. The different MIMO parameters, Envelope Correlation Coefficient (ECC), Total Active Reflection Coefficient (TARC), and Diversity Gain (DG) are investigated and found within the acceptable limits. The optimization of the proposed dual port tunable antenna is done through the various ML algorithms, including Artificial Neural Network (ANN), K‐Nearest Neighbor (KNN), Decision Tree (DT), Random Forest (RF), and Extreme Gradient Boosting (XGB). The KNN ML algorithm provides more than 98% accuracy for predicting the S‐parameters in all configurations. Hence, the proposed antenna is suitable for 5G NR applications.

The accuracy of vehicle position and heading angle improvement based on dual-antenna GNSS/INS/Barometer integration using extended Kalman filter

Abstract In the field of autonomous driving progresses, obtaining the precise position and attitude of vehicles through measurement technology is vital. An integrated GNSS/INS/Barometer (Global Navigation Satellite System/Inertial Navigation System/Barometer) fusion method is proposed to improve vehicle positioning and heading angle accuracy. An extended Kalman filter (EKF) based on horizontal dilution of precision (HDOP) is designed to fuse the INS error and the GNSS measurement. Furthermore, GNSS dual antennas are utilized to increase a state variable in EKF based on HDOP in addition to position and velocity. The kinematic constraint of zero velocity in the lateral and vertical directions of vehicle movement is used to measure the mounting angle to reduce error. The position and heading angle accuracy of the proposed method are 0.483 m and 1.358°, which represent reductions of 37.03% and 43.86% compared to the conventional EKF method, respectively. The experimental results demonstrate that the proposed method can measure accurate position and heading angle in both open and occluded environments.

Dual-mode Antenna Tracking System for Rocket Launch Applications

Rocket launches are complex events that require tracking antennas to maintain a communication link. This study introduces a hybrid tracking strategy that combines manual and program modes by utilizing a predetermined trajectory of the rocket. Automatic switching between tracking modes ensures ongoing monitoring, even during unexpected trajectory changes with the monopulse approach. The dual parabolic antenna arrangement enables this switching. The system estimates the monopulse ratio from the signal strength of each antenna, allowing automatic program tracking to shift to manual mode when reception concerns arise. Performance evaluations included manual, programmable, and dual-mode tests. The system responded to human input and automatically aligned the antenna with slight elevation errors during the initial phase. Adjusting the initial elevation reduced the error. The mode transition was examined by measuring the antenna radiation patterns and monopulse ratio. The system’s performance was evaluated in rocket launches, with the rocket trajectory input into the graphical user interface. The antenna exhibited an azimuthal movement of up to 10 °, and the ratio fluctuation values remained within the antenna’s field of view. After 8.8 seconds, the mode switched from program to manual, indicating that the functioning of the system’s functioning was stable.