Drug Depot Research Articles

Mechanisms by Which Liposomes Improve Inhaled Drug Delivery for Alveolar Diseases.

Diseases of the pulmonary alveolus, such as pulmonary fibrosis, are leading causes of morbidity and mortality, but exceedingly few drugs are developed for them. A major reason for this gap is that after inhalation, drugs are quickly whisked away from alveoli due to their high perfusion. To solve this problem, the mechanisms by which nano-scale drug carriers dramatically improve lung pharmacokinetics using an inhalable liposome formulation containing nintedanib, an antifibrotic for pulmonary fibrosis, are studied. Direct instillation of liposomes in murine lung increases nintedanib's total lung delivery over time by 8000-fold and lung half life by tenfold, compared to oral nintedanib. Counterintuitively, it is shown that pulmonary surfactant neither lyses nor aggregates the liposomes. Instead, each lung compartment (alveolar fluid, alveolar leukocytes, and parenchyma) elutes liposomes over 24 h, likely serving as "drug depots." After deposition in the surfactant layer, liposomes are transferred over 3-6 h to alveolar leukocytes (which take up a surprisingly minor 1-5% of total lung dose instilled) in a nonsaturable fashion. Further, all cell layers of the lung parenchyma take up liposomes. These and other mechanisms elucidated here should guide engineering of future inhaled nanomedicine for alveolar diseases.

An injectable PEG-like conjugate forms a subcutaneous depot and enables sustained delivery of a peptide drug

Many biologics have a short plasma half-life, and their conjugation to polyethylene glycol (PEG) is commonly used to solve this problem. However, the improvement in the plasma half-life of PEGylated drugs' is at an asymptote because the development of branched PEG has only had a modest impact on pharmacokinetics and pharmacodynamics. Here, we developed an injectable PEG-like conjugate that forms a subcutaneous depot for the sustained delivery of biologics. The PEG-like conjugate consists of poly[oligo(ethylene glycol) methyl ether methacrylate] (POEGMA) conjugated to exendin, a peptide drug used in the clinic to treat type 2 diabetes. The depot-forming exendin-POEGMA conjugate showed greater efficacy than a PEG conjugate of exendin as well as Bydureon, a clinically approved sustained-release formulation of exendin. The injectable depot-forming exendin-POEGMA conjugate did not elicit an immune response against the polymer, so that it remained effective and safe for long-term management of type 2 diabetes upon chronic administration. In contrast, the PEG conjugate induced an anti-PEG immune response, leading to early clearance and loss of efficacy upon repeat dosing. The exendin-POEGMA depot also showed superior long-term efficacy compared to Bydureon. Collectively, these results suggest that an injectable POEGMA conjugate of biologic drugs that forms a drug depot under the skin, providing favorable pharmacokinetic properties and sustained efficacy while remaining non-immunogenic, offers significant advantages over other commonly used drug delivery technologies.

Recruiting T cells and sensitizing tumors to NKG2D immune surveillance for robust antitumor immune response.

Although recruiting T cells to convert cold tumors into hot can prevent some tumors from evading immune surveillance, tumors have evolved more mechanisms to achieve immune evasion, such as downregulating major histocompatibility complex I (MHC I) molecules expression to prevent T cells from recognizing tumor-antigens, or secreting immune suppression cytokines that disable T cells. Tumor immune evasion not only promotes tumor growth, but also weakens the efficacy of existing tumor immunotherapies. Therefore, recruiting T cells while reshaping innate immunity plays an important role in preventing tumor immune escape. In this study, we constructed a long-acting in situ forming implant (ISFI) based on the Atrigel technology, co-encapsulated with G3-C12 and sulfisoxazole (SFX) as a drug depot in the tumor site (SFX+G3-C12-ISFI). First, G3-C12 could recruit T cells, and transform cold into hot tumors. Furthermore, SFX could inhibit tumor-derived exosomes secretion, reduce the shedding of NKG2D ligand (NKG2DL), repair NKG2D/NKG2DL pathway, reinvigorate natural killer (NK) cells, and evade the effects of MHC I molecules missing. In the humanized cold tumor model, our strategy showed an excellent anti-tumor effect, providing a smart strategy for solving tumor evasion immune surveillance.

An intracellular in situ assembly of ultrasmall nanoparticles as drug depots for enhanced chemotherapy

An intracellular in situ assembly of nanoparticles with an initial ultrasmall size undergo transformation to micro-sized particles as drug depots inside tumour cells, which can highly improve the chemotherapy efficacy against B-cell lymphoma.

3D printed and stimulus responsive drug delivery systems based on synthetic polyelectrolyte hydrogels manufactured via digital light processing.

Hydrogels are three-dimensional hydrophilic polymeric networks absorbing up to and even more than 90 wt% of water. These superabsorbent polymers retain their shape during the swelling process while enlarging their volume and mass. In addition to their swelling behavior, hydrogels can possess other interesting properties, such as biocompatibility, good rheological behavior, or even antimicrobial activity. This versatility qualifies hydrogels for many medical applications, especially drug delivery systems. As recently shown, polyelectrolyte-based hydrogels offer beneficial properties for long-term and stimulus-responsive applications. However, the fabrication of complex structures and shapes can be difficult to achieve with common polymerization methods. This obstacle can be overcome by the use of additive manufacturing. 3D printing technology is gaining more and more attention as a method of producing materials for biomedical applications and medical devices. Photopolymerizing 3D printing methods offer superior resolution and high control of the photopolymerization process, allowing the fabrication of complex and customizable designs while being less wasteful. In this work, novel synthetic hydrogels, consisting of [2-(acryloyloxy) ethyl]trimethylammonium chloride (AETMA) as an electrolyte monomer and poly(ethylene glycol)-diacrylate (PEGDA) as a crosslinker, 3D printed via Digital Light Processing (DLP) using a layer height of 100 μm, are reported. The hydrogels obtained showed a high swelling degree q∞m,t ∼ 12 (24 h in PBS; pH 7; 37 °C) and adjustable mechanical properties with high stretchability (εmax ∼ 300%). Additionally, we embedded the model drug acetylsalicylic acid (ASA) and investigated its stimulus-responsive drug release behaviour in different release media. The stimulus responsiveness of the hydrogels is mirrored in their release behavior and could be exploited in triggered as well as sequential release studies, demonstrating a clear ion exchange behavior. The received 3D-printed drug depots could also be printed in complex hollow geometry, exemplarily demonstrated via an individualized frontal neo-ostium implant prototype. Consequently, a drug-releasing, flexible, and swellable material was obtained, combining the best of both worlds: the properties of hydrogels and the ability to print complex shapes.

Thermosensitive biomaterial gels with chemical permeation enhancers for enhanced microneedle delivery of naltrexone for managing opioid and alcohol dependency.

Naltrexone (NTX) can be transdermally delivered using microneedles (MN) to treat opioid and alcohol misuse disorders, but delivery is blunted by rapid in vivo micropore closure. Poloxamer (P407), a thermosensitive biocompatible hydrogel, sustains NTX delivery through MN-treated skin by generating a drug depot within the micropores. Optimizing P407 formulations could maintain sustained delivery after micropore closure while reducing required patch sizes, which would be more discreet and preferred by most patients. Here we developed NTX-loaded P407 gels with chemical permeation enhancers (CPEs) and used these novel formulations alongside MN treatment to enhance NTX permeation, utilizing parallel micropore and intact skin transport pathways. We analyzed physicochemical and rheological properties of CPE-loaded P407 formulations and selected formulations with DMSO and benzyl alcohol for further study. In vitro permeation tests demonstrated more consistent and sustained NTX delivery through MN-treated porcine skin from 16% P407 formulations vs. aqueous solutions. P407 with 1% benzyl alcohol and 10% DMSO significantly, P < 0.05, increased flux through MN-treated skin vs. formulations with benzyl alcohol alone. This formulation would require a smaller size patch than previously used to deliver NTX in humans, with half the NTX concentration. This is the first time poloxamer biomaterials have been used in combination with CPEs to improve MN-assisted transdermal delivery of an opioid antagonist. Here we have demonstrated that P407 in combination with CPEs effectively sustains NTX delivery in MN-treated skin while requiring less NTX than previously needed to meet clinical goals.

Composite Separable Microneedles for Transdermal Delivery and Controlled Release of Salmon Calcitonin for Osteoporosis Therapy.

A composite separable microneedles (MNs) system consisting of silk fibroin (SF) needle tips and hyaluronic acid (HA) base is developed for transdermal delivery of salmon calcitonin (sCT) for therapy of osteoporosis. Poly(ethylene glycol) (PEG) is used to modulate the conformation structure of SF to achieve controllable sustained release of sCT. The prepared MNs can effectively penetrate the skin stratum corneum. After application to the skin, the HA base is dissolved within 2 min, allowing these SF drug depots to be implanted into the skin for controllable sustained release of sCT. The release kinetics of sCT can be controlled by regulating the conformation of SF with PEG and the interaction between sCT peptide and SF proteins. Compared with traditional needle injection, delivery of sCT using optimized HA-PEG/SF MNs shows better trabecular bone repair for ovariectomized-induced osteoporosis in mice. The proposed MNs system provides a new noninjection strategy for therapy of osteoporosis.

Microporous surface as a new solution for stent surface modification: A review

The introduction of coronary stents into clinical practice has reduced repeated patient visits compared with balloon angioplasty alone. Also, drug-eluting stents substantially reduced the restenosis incidence. Therefore, later complications related to the implantation of a stent coated with a cytostatic-containing polymer became more relevant. The mechanism of late stent complications is multifactorial. It is mainly due to the body's response to the prolonged indwelling of the drug carrier polymer on the coronary stent's surface. There is a trend towards the return of polymer-free drug coating technologies, which are implemented through certain modifications of stent surfaces for better drug retention and proper drug distribution. It is mainly achieved using drug depots in various reservoirs: grooves, nanoparticles in the matrix compound, micropores, through and blind micro reservoirs, etc. New promising technologies for crystallizing cytostatic drugs or depositing them in specially designed reservoirs show good preclinical and clinical results, comparable or even superior to approved coronary stents. Micropores as carriers for antiproliferative agents on the stent surface are a promising direction to rejecting the use of polymers in stents.

Ring inserts as a useful strategy to prepare tip-loaded microneedles for long-acting drug delivery with application in HIV pre-exposure prophylaxis

The role of microneedle array patches (MAPs) and, in particular, dissolving MAPs in transdermal drug delivery has increased exponentially over the last decade. MAPs are able to form drug depots in the viable skin from where poorly soluble drugs dissolve in a long-acting fashion, showing promise in the management of multiple diseases. The manufacture of these systems can present some challenges, including the presence of bubbles in the baseplates and consequent lack of uniformity in microneedle formation and drug content. Here, we present a simple method based on ring inserts to produce tip-loaded MAPs using the antiretroviral drug cabotegravir sodium (CAB). The obtained MAPs presented a high uniformity in terms of microneedle formation, and a suitable insertion capability, as per the mechanical characterisation performed. An optimisation based on design of experiments revealed that centrifugation parameters had a significant impact on the skin deposition of the MAPs in excised neonatal porcine skin using Franz cells, with values ranging from 62.24 ± 47.13 µg to 174.13 ± 41.10 µg of CAB. Pharmacokinetic studies carried out in rats evidenced the capacity of the MAPs to maintain therapeutic plasma levels of CAB for 14 days, with Tmax values reached between 5 and 8 days.

Engineering Multishelled Nanostructures Enables Stepwise Self-Degradability for Drug-Release Optimization.

The balance between degradability and drug release kinetics is a major challenge for the development of drug delivery systems. Here we develop hierarchically structured nanoparticles comprising multiple noncontact silica shells using an amorphous calcium carbonate template. The system could be degraded in a sequential fashion on account of the molecularly engineered multishelled structures. The hydrolysis rate of drug-containing cores is inversely correlated with the nanoparticle concentration due to the shielding effect of the hierarchical nanostructure and could be exploited to regulate the release kinetics. Specifically, multishelled nanospheres show a low drug release rate with high doses that increases steadily as the concentration decreases due to continuous degradation, thus stabilizing the local drug concentration for effective tumor therapy. Moreover, the nanoparticles could be eventually degraded completely, which may reduce their health risks. This kind of hierarchically structured silica-based nanoparticle could serve as a sustainable drug depot and provides a new avenue for tumor treatment.

Bacterial cellulose adhesive patches designed for soft mucosal interfaces

The wet environment in the oral cavity is challenging for topical disease management approaches. The compromised material properties leading to weak adhesion and short retention (<8 h) in such environment result in frequent reapplication of the therapeutics. Composites of bacterial cellulose (BC) and carbene-based bioadhesives attempt to address these shortcomings. Previous designs comprised of aqueous formulations. The current design, for the first time, presents dry, shelf-stable cellulose patches for convenient ready-to-use application. The dry patches simultaneously remove tissue surface hydration while retaining carbene-based photocuring and offers on-demand adhesion. The dry patch prototypes are optimized by controlling BC/adhesive mole ratios and dehydration technique. The adhesion strength is higher than commercial denture adhesives on soft mucosal tissues. The structural integrity is maintained for a minimum of 7 days in aqueous environment. The patches act as selective nanoporous barrier against bacteria while allowing permeation of proteins. The results support the application of BC-based adhesive patches as a flexible platform for wound dressings, drug depots, or combination thereof.

Lidosomes: Innovative Vesicular Systems Prepared from Lidocaine Surfadrug.

Lidocaine is a local anaesthetic drug with an amphiphilic structure able to self-associate, under certain conditions, in molecular aggregates playing the role of both carrier and drug. The aim of this study was to determine the optimal conditions for obtaining vesicular carriers, called lidosomes. The new formulations were obtained using both lidocaine and lidocaine hydrochloride and different hydration medias (distilled water, acid, and basic aqueous solution). Lidosomes formulations were characterized in terms of size, ζ-potential, drug retained, stability formulation, and ex vivo permeation profile. Moreover, lidosomes were incorporated in two different gel structures: one based on carboxymethylcellulose and one based on pluronic F-127 to achieve suitable properties for a topical application. Results obtained showed that lidocaine showed a better performance to aggregate in vesicular carriers in respect to hydrochloride form. Consequently, only formulations comprised of lidocaine were studied in terms of skin permeation performance and as carriers of another model drug, capsaicin, for a potential combined therapy. Lidocaine, when in form of vesicular aggregates, acted as percutaneous permeation enhancer showing better permeation profiles with respect to drug solutions. Moreover, lidosomes created a significant drug depot into the skin from which the drug was available for a prolonged time, a suitable feature for a successful local therapy.

Thermosensitive acetylated carboxymethyl chitosan gel depot systems sustained release caffeic acid phenethyl ester for periodontitis treatment

AbstractPeriodontitis is a chronic inflammatory disease of tooth support tissues leading to progressive destruction of periodontal soft tissues as well as alveolar bone, and can be treated with anti‐inflammatory and bone‐protective agents to prevent disease progression. Caffeic acid phenethyl ester (CAPE) is a natural polyphenolic compound with anti‐inflammation, anti‐oxidation and bone tissue repair efficacy. In this work, we synthesized a thermosensitive hydrogel matrix of acetylated carboxymethyl chitosan (A‐CC), and firstly applied for periodontal local drug delivery. The biocompatible CAPE‐loaded A‐CC hydrogel (CAPE‐A‐CC) has the advantages of forming a drug depot in situ, sustained release and precisely improving the drug concentration in the lesion sites compared with traditional systemic administration. In addition, CAPE‐A‐CC could significantly inhibit the expression of inflammatory cytokines of TNF‐α, IL‐1β, IL‐6, and IL‐17 in macrophages, and increased the expression of alkaline phosphatase (ALP) in human periodontal ligament stem cells (hPDLSC) related to osteogenesis. This study develops a novel in situ thermosensitive hydrogel delivery system to improve the therapeutic potential of natural active ingredient for periodontitis therapy.

Polymeric ethosomal gel loaded with nimodipine: Optimisation, pharmacokinetic and histopathological analysis

This study was performed with the main objective of formulating and evaluating the potential of ethosomesl gel (Etho gel) to deliver nimodipine (NiM) for cardiovascular disease, a potent water insoluble anti-hypertensive drug via skin to reach the deeper layers of skin. The Box-Behnken design (BBD) was used to optimize the NiM-Eth to determine the impact of the independent and depended variables. The effectiveness of drug entrapment, vesicle size, and cumulative drug release were assessed for the NiM loaded ethosomes and NiM-Eth gel using carbopol 934 as a gelling agent. Fourier transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), Power X-ray diffraction (PXRD), and scanning electron microscopy (SEM) analysis were performed and analysed their physicochemical characters. Rat abdomen skin was used to investigate drug permeability and deposition. As compared to marketed products, NiM-Eth gel produced an improved drug permeability in ex vivo experiments. The mean AUC0 to AUC0-∞ of NiM-Eth gel when compared to oral formulation (Nymalize oral preparation) was found to be increased from 4.1 to 5.9 folds which was found to be resulted from first pass effect. Histophatlogical findings revealed that the maximum amount of NiM penetrated the stratum corneum of the skin and create drug depots in the deep layer. In summary, it can be said that NiM might be successfully prepared in NiM-Eth gel for transdermal drug delivery.

Engineering of hybrid spheroids of mesenchymal stem cells and drug depots for immunomodulating effect in islet xenotransplantation.

Immunomodulation is an essential consideration for cell replacement procedures. Unfortunately, lifelong exposure to nonspecific systemic immunosuppression results in immunodeficiency and has toxic effects on nonimmune cells. Here, we engineered hybrid spheroids of mesenchymal stem cells (MSCs) with rapamycin-releasing poly(lactic-co-glycolic acid) microparticles (RAP-MPs) to prevent immune rejection of islet xenografts in diabetic C57BL/6 mice. Hybrid spheroids were rapidly formed by incubating cell-particle mixture in methylcellulose solution while maintaining high cell viability. RAP-MPs were uniformly distributed in hybrid spheroids and sustainably released RAP for ~3 weeks. Locoregional transplantation of hybrid spheroids containing low doses of RAP-MPs (200- to 4000-ng RAP per recipient) significantly prolonged islet survival times and promoted the generation of regional regulatory T cells. Enhanced programmed death-ligand 1 expression by MSCs was found to be responsible for the immunomodulatory performance of hybrid spheroids. Our results suggest that these hybrid spheroids offer a promising platform for the efficient use of MSCs in the transplantation field.

Subcutaneous delivery of a dendrimer-BH3 mimetic improves lymphatic uptake and survival in lymphoma.

As a malignant tumour of lymphatic origin, B-cell lymphoma represents a significant challenge for drug delivery, where effective therapies must access malignant cells in the blood, organs and lymphatics while avoiding off-target toxicity. Subcutaneous (SC) administration of nanomedicines allows preferential access to both the lymphatic and blood systems and may therefore provide a route to enhanced drug exposure to lymphomas. Here we examine the impact of SC dosing on lymphatic exposure, pharmacokinetics (PK), and efficacy of AZD0466, a small molecule dual Bcl-2/Bcl-xL inhibitor conjugated to a 'DEP®' G5 poly-l-lysine dendrimer. PK studies reveal that the plasma half-life of the dendrimer-drug conjugate is 8-times longer than that of drug alone, providing evidence of slow release from the circulating dendrimer nanocarrier. The SC dosed construct also shows preferential lymphatic transport, with over 50% of the bioavailable dose recovered in thoracic lymph. Increases in dose (up to 400mg/kg) are well tolerated after SC administration and studies in a model of disseminated lymphoma in mice show that high dose SC treatment outperforms IV administration using doses that lead to similar total plasma exposure (lower peak concentrations but extended exposure after SC). These data show that the DEP® dendrimer can act as a circulating drug depot accessing both the lymphatic and blood circulatory systems. SC administration improves lymphatic exposure and facilitates higher dose administration due to improved tolerability. Higher dose SC administration also results in improved efficacy, suggesting that drug delivery systems that access both plasma and lymph hold significant potential for the treatment of haematological cancers where lymphatic and extranodal dissemination are poor prognostic factors.

Vascular bursts-mediated tumor accumulation and deep penetration of spherical nucleic acids for synergistic radio-immunotherapy.

While nanomedicines have attracted great interests for tumor therapy, their targeting and intra-tumoral penetrating efficiencies have been questioned. Here, we report a two-step low-dose radiotherapy (RT) strategy to realize significant accumulation and deep penetration of spherical nucleic acids (SNAs)-based nanomedicine for synergistic radio-immunotherapy. The first step RT was employed to recruit large amounts of macrophages into tumor. The tumor infiltrated macrophages not only served as nanoparticles drug depots, but also elicited dynamic bursts extravasation to enhance nanoparticles accumulation. We optimized the spatiotemporal combination of RT and SNAs administration for higher level of SNAs delivery, and the delivered SNAs promote M2-to-M1 phenotype switch of macrophages to increase phagocytosis of nanoparticles by 6-fold, resulting in positive feedback with even higher accumulation and intra-tumor penetration of SNAs. Through vascular bursts and macrophage repolarization, as high as 25-fold enhancement of nanoparticles accumulation was achieved as compared to passive targeting of nanoparticles, and the nanoparticles were eventually distributed throughout the tumor tissue with efficient deep penetration. Finally, SNAs in tumor simultaneously sensitized the second dose of RT and remodeled tumor immune microenvironment, resulting in a synergistic anticancer therapy in combination of anti-PD-L1 antibody (αPD-L1) with no noticeable side effects caused by either RT or αPD-L1.

A double crosslinking adhesion mechanism for developing tough hydrogel adhesives

Tough hydrogel adhesives that consist of a robust gel network and can strongly adhere to wet tissues have shown great promise as the next generation of bioadhesives. While a variety of chemistries can be utilized to construct the tough gel network, the covalent conjugation methods for tissue adhesion are still limited. Here we report, for the first time, the use of side product-free amine-thiolactone chemistry which initiates a double crosslinking adhesion mechanism to develop tough gel adhesives. Thiolactone groups can conjugate with tissue-surface amines via a ring-opening reaction. The resultant thiol end groups can be further crosslinked into disulfide linkages, enabling the formation of a robust and stable adhesion layer. The thiolactone-bearing tough hydrogel composed of methacrylate-modified gelatin, acrylic acid, and thiolacone acrylamide exhibited good biocompatibility and mechanical properties, and strong adhesion to various types of engineering solids and tissues. We also demonstrated its ability to function as a tissue sealant and drug depot. The novel adhesion mechanism will diversify future design of bioadhesives for hemostasis, drug delivery, tissue repair, and other applications. Statement of significanceTough hydrogel adhesives with excellent tissue-adhesive and mechanical properties have demonstrated tremendous promise for hemostasis, tissue repair, and drug delivery applications. However, the covalent chemistry for tissue adhesion has been limited, which narrows the choice of materials for the design of bioadhesives and may pose a safety concern. Here, for the first time, we report the use of side product-free amine-thiolactone chemistry, which involves a double crosslinking adhesion mechanism, for developing tough hydrogel adhesives. We demonstrate that thiolactone-bearing tough hydrogels exhibit favorable biocompatibility and mechanical properties, and superior adhesion to both engineering solids and tissues. Our new adhesion technology will greatly facilitate future development of advanced bioadhesives for numerous biomedical applications.

Cationic peptide carriers enable long-term delivery of insulin-like growth factor-1 to suppress osteoarthritis-induced matrix degradation

BackgroundInsulin-like growth factor-1 (IGF-1) has the potential to be used for osteoarthritis (OA) treatment but has not been evaluated in clinics yet owing to toxicity concerns. It suffers from short intra-joint residence time and a lack of cartilage targeting following its intra-articular administration. Here, we synthesize an electrically charged cationic formulation of IGF-1 by using a short-length arginine-rich, hydrophilic cationic peptide carrier (CPC) with a net charge of +14, designed for rapid and high uptake and retention in both healthy and arthritic cartilage.MethodsIGF-1 was conjugated to CPC by using a site-specific sulfhydryl reaction via a bifunctional linker. Intra-cartilage depth of penetration and retention of CPC-IGF-1 was compared with the unmodified IGF-1. The therapeutic effectiveness of a single dose of CPC-IGF-1 was compared with free IGF-1 in an IL-1α-challenged cartilage explant culture post-traumatic OA model.ResultsCPC-IGF-1 rapidly penetrated through the full thickness of cartilage creating a drug depot owing to electrostatic interactions with negatively charged aggrecan-glycosaminoglycans (GAGs). CPC-IGF-1 remained bound within the tissue while unmodified IGF-1 cleared out. Treatment with a single dose of CPC-IGF-1 effectively suppressed IL-1α-induced GAG loss and nitrite release and rescued cell metabolism and viability throughout the 16-day culture period, while free IGF at the equivalent dose was not effective.ConclusionsCPC-mediated depot delivery of IGF-1 protected cartilage by suppressing cytokine-induced catabolism with only a single dose. CPC is a versatile cationic motif that can be used for intra-cartilage delivery of other similar-sized drugs.

Inflammation-homing “living drug depot” for efficient arthritis treatment

Delivering therapeutic agents efficiently to inflamed joints remains an intractable problem in rheumatoid arthritis (RA) treatment due to the complicated physiological barriers. Circulating monocytes could selectively migrate to inflamed sites and differentiate into resident macrophages to aggravate RA. Therefore, a drug carrier that can be specifically internalized by circulating monocytes and switch monocytes into anti-inflammatory phenotype when reaching inflamed sites, might bypass the in vivo physiological barriers and achieve efficient RA therapy. Herein, we design a dextran sulfate (DS) functionalized nanoparticle (ZDNP) to selectively deliver anti-inflammatory agent dexamethasone (Dex) to circulating monocytes via the scavenger receptors on monocytes. Monocytes engulfing drug-loaded ZDNP could subsequently home to arthritic joints and act as a “living drug depot” to combat RA. Results revealed that ZDNP could be preferentially internalized by circulating monocytes when intravenously administrated in vivo. In a rat arthritic model, we found that circulating monocytes remarkably facilitated drug distribution and retention in inflamed joints. Moreover, monocytes engulfing drug-loaded nanoparticles exhibited favorable anti-inflammatory ability and M2-biased differentiation. Our work offers a facile approach to achieve site-directed anti-inflammatory therapy by taking advantage of the inflammation-homing ability of circulating monocytes. Statement of significanceCirculating monocytes can migrate to inflamed sites and then differentiate into macrophages to aggravate arthritis. Therefore, a drug carrier that can be specifically internalized by circulating monocytes and switch monocytes into anti-inflammatory phenotype when reaching inflamed sites may achieve efficient arthritis therapy. Here, we designed a monocyte-targeting nanoparticle (ZDNP) to selectively deliver anti-inflammatory Dex to circulating monocytes. When injected intravenously, ZDNP was effectively internalized by circulating monocytes via a scavenger receptor and subsequently was transported to arthritic joints, where monocytes engulfing the drug-loaded nanoparticles could switch to an anti-inflammatory phenotype to inhibit arthritis progress. We provide detailed evidence about the in vivo fate of ZDNP and unravel how monocytes act as a “living drug depot” to achieve site-directed arthritis therapy.