Drug Delivery Carriers Research Articles

Nanomaterials for refining tumor microenvironment and enhancing therapy in head and neck squamous cell carcinoma: a review

Abstract Head and neck squamous cell carcinoma (HNSCC) is a prevalent and lethal solid tumor with a high mortality rate. Conventional cancer treatments, including surgery, radiotherapy, and chemotherapy, primarily target cancer cell eradication. However, uncontrolled proliferation and metabolic activities of these cells result in abnormalities in nutrient levels, hypoxia, and immunosuppression within the tumor microenvironment (TME). These factors constrain the efficacy of traditional treatments by promoting drug resistance, recurrence, and metastasis. Nanomaterials (NMs), such as nanozymes, can exhibit enzymatic activity similar to that of natural enzymes and offer a promising avenue for the direct modification of the TME through catalytic oxidation-reduction processes. Moreover, they can serve as sensitizers or drug delivery carriers, enhancing the efficacy of traditional treatment methods. Recently, NMs have garnered significant attention from oncologists. This review begins with an overview of the composition and unique characteristics of the TME. Subsequently, we comprehensively explored the application of NMs in the treatment of HNSCC. Finally, we discuss the potential prospects and challenges associated with using NMs in biomedical research.

Adsorption, Sensor Properties, AIM Analysis, Docking of an Anticancer Drug Benzamide on Nanocones: SERS, Solvent Effects and DFT Investigation

Using first principles, the electrical response of carbon nanocones (NC) to the drug benzamide (BZE) was investigated using density functional theory (DFT). The adsorption energies of BZE at the nanocone’s bottom (Complex I), side (Complex II), and top (Complex III) are −88.35 kcal/mol, −45.46 kcal/mol and −48.73 kcal/mol. The two other adsorptions, Complexes II and III are physisorption, however, the high value of Eads in the case of Complex I with the drop in bond lengths suggests that Complex I adsorption is chemisorption. The electrical conductivity has risen as a result of the considerable decrease in the nanocone energy gap (from 0.63 eV to 0.61 eV, 0.61 eV and 0.60 eV) caused by the adsorption of BZE. It suggests that the nanocones would be a good fit for the electronic sensors and an appropriate choice for BZE detection. Additionally, the BZE adsorption influences the nanocone’s workfunction, which is reduced by approximately 45.19%, 2.8% and 2.05% for complexes I to III. This suggests that the nanocone could be a workfunction-based sensor for the detection of BZE. The increase in binding affinity in complexes reveals that the nanocones will act as a drug delivery carrier. Theoretically, anticipated Raman spectra of BZE and complexes show SERS activity and inactive normal Raman modes are active in the Raman spectrum of complexes. Compounds II and III exhibit weak noncovalent interactions (NCI) and due to the presence of covalent bonding interaction in compound I, significant changes in other bonding and nonbonding electron densities are observed compared to compounds II and III.

Exploring pectin-casein micelles as novel carriers for oral drug delivery of artesunate in the treatment of systemic lupus erythematosus

The oral route of administration is considered the optimal choice for treating chronic diseases due to its convenience and non-invasiveness, which can help prevent physical and mental harm to patients undergoing long-term treatment. However, challenges such as safety, gastrointestinal stability, and bioavailability of oral drugs often limit their effectiveness. Natural biomacromolecule micelles, known for their safety, stability, biocompatibility, and diverse functions, have emerged as promising carriers for oral treatment of chronic diseases like systemic lupus erythematosus (SLE) with fat-soluble drugs. This study introduces an innovative approach by developing an oral delivery system using chemically synthesized natural biomacromolecules to load artesunate for treating SLE. By synthesizing amphiphilic polymer micelles from pectin and casein through a carbodiimide reaction, a more stable structure is achieved. The hydrophobic core of these micelles encapsulates artesunate, resulting in the formation of an oral delivery system (PC-AS) with several advantages, including high drug loading and encapsulation efficiency, small particle size, negative potential, strong stability in the gastrointestinal tract, low toxicity and side effects, strong adhesion in the small intestine, and high bioavailability. These advantages facilitate efficient absorption of artesunate in the gastrointestinal tract, leading to improved bioavailability and effective alleviation of SLE-like symptoms in MRL/lpr mice. By utilizing chemically synthesized natural macromolecular micelles for delivering artesunate in the treatment of SLE, this study overcomes the oral barriers associated with the original drug and presents a novel solution for the long-term oral treatment of chronic diseases.

Preserved structure and function of human serum albumin self-folded in the oxidative cytoplasm of Escherichia coli

Human serum albumin (HSA), a polypeptide featuring 17 disulfide bonds, acts as a crucial transport protein in human blood plasma. Its extended circulation half-life, mediated by FcRn (neonatal Fc receptor)-facilitated recycling, positions HSA as an excellent carrier for long-acting drug delivery. However, the conventional method of obtaining HSA from human blood faces limitations due to availability and potential contamination risks, such as blood-borne diseases. This study introduced SHuffle, an oxidative Escherichia coli (E. coli) expression system, for the production of recombinant HSA (rHSA) that spontaneously self-folds into its native conformation. This system ensures precise disulfide bond formation and correct folding of cysteine-rich rHSA, eliminating the need for chaperone co-expression or domain fusion of a folding enhancer. The purified rHSA underwent thorough physicochemical characterization, including mass spectrometry, circular dichroism spectroscopy, intrinsic fluorescence spectroscopy, esterase-like activity assay, and size exclusion chromatography, to assess critical quality attributes. Importantly, rHSA maintained native binding affinity to FcRn and the albumin-binding domain. Collectively, our analyses demonstrated a high comparability between rHSA and plasma-derived HSA. The expression of rHSA in E. coli with an oxidizing cytosol provides a secure and cost-effective approach, enhancing the potential of rHSA for diverse medical applications.

Magnetic targeting and pH-microwave dual responsive Janus mesoporous silica nanoparticles for drug encapsulation and delivery

In this paper, a new Janus-structured nano drug delivery carrier Fe3O4@TiO2&mSiO2 was designed and synthesized, which consisted of a spherical head and a closely connected rod. The head was a nanocomposite of core/shell structure with magnetic spinel ferric tetraoxide core and anatase titanium dioxide shell (Fe3O4@TiO2), and the rod was ordered mesoporous silica (mSiO2). The nanocarriers showed excellent magnetic targeting capability (saturation magnetization, 25.18 emu g−1). The core/shell heads endowed the carriers with fine microwave responsiveness. The pore volume of mesoporous nanocarriers was 0.101 cm3 g−1, and the specific surface area was 489.0 m2 g−1. Anticancer drug doxorubicin could be loaded in the mesoporous of the carriers to form Fe3O4@TiO2&mSiO2-DOX. The drug loading capacity was 10.4%. Fe3O4@TiO2&mSiO2-DOX exhibited acid-sensitive and microwave-sensitive release properties along with good bio-compatibility. Fe3O4@TiO2&mSiO2 Janus nanoparticles are expected to be ideal drug carriers.

Mesoporous silica nanoparticles as a drug delivery mechanism.

Research in intelligent drug delivery systems within the field of biomedicine promises to enhance drug efficacy at disease sites and reduce associated side effects. Mesoporous silica nanoparticles (MSNs), characterized by their large specific surface area, appropriate pore size, and excellent biocompatibility, have garnered significant attention as one of the most effective carriers for drug delivery. The hydroxyl groups on their surface are active functional groups, facilitating easy functionalization. The installation of controllable molecular machines on the surface of mesoporous silica to construct nanovalves represents a crucial advancement in developing intelligent drug delivery systems (DDSs) and addressing the issue of premature drug release. In this review, we compile several notable and illustrative examples of MSNs and discuss their varied applications in DDSs. These applications span regulated and progressive drug release mechanisms. MSNs hold the potential to enhance drug solubility, improve drug stability, and mitigate drug toxicity, attributable to their ease of functionalization. Furthermore, intelligent hybrid nanomaterials are being developed, featuring programmable properties that react to a broad spectrum of stimuli, including light, pH, enzymes, and redox triggers, through the use of molecular and supramolecular switches.

High molecular weight hyaluronic acid-liposome delivery system for efficient transdermal treatment of acute and chronic skin photodamage

Photodamage is one of the most common causes of skin injury. High molecular weight hyaluronic acid (HHA) has shown immense potential in the treatment of skin photodamage by virtue of its anti-inflammatory, reparative, and antioxidative properties. However, due to its large molecular structure of HHA, HHA solution could only form a protective film on the skin surface in conventional application, failing to effectively penetrate the skin, which necessitates the development of new delivery strategies. Liposomes, with a structure similar to biological membranes, have garnered extensive attention as transdermal drug delivery carriers because of their advantages in permeability, dermal compatibility, and biosafety. Herein, we have developed a HHA-liposome transdermal system (HHL) by embedding HHA into the liposome structure using reverse evaporation, high-speed homogenization, and micro-jet techniques. The effective penetration and long-term residence of HHA in skin tissue were multidimensionally verified, and the kinetics of HHA in the skin were extensively studied. Moreover, it was demonstrated that HHL significantly strengthened the activity of human keratinocytes and effectively inhibits photo-induced cellular aging in vitro. Furthermore, a murine model of acute skin injury induced by laser ablation was established, where the transdermal system showed significant anti-inflammatory and immunosuppressive properties, promoting skin proliferation and scar repair, thereby demonstrating immense potential in accelerating skin wound healing. Meanwhile, HHL significantly ameliorated skin barrier dysfunction caused by simulated sunlight exposure, inhibited skin erythema, inflammatory responses, and oxidative stress, and promoted collagen expression in a chronic photodamage skin model. Therefore, this transdermal delivery system with biocompatibility represents a promising new strategy for the non-invasive application of HHA in skin photodamage, revealing the significant potential for clinical translation and broad application prospects. Statement of significanceThe transdermal system utilizing hyaluronic acid-based liposomes enhances skin permeability and retains high molecular weight hyaluronic acid (HHL). In vitro experiments with human keratinocytes demonstrate significant skin repair effects of HHL and its effective inhibition of cellular aging. In an acute photodamage model, HHL exhibits stronger anti-inflammatory and immunosuppressive properties, promoting skin proliferation and scar repair. In a chronic photodamage model, HHL significantly improves skin barrier dysfunction, reduces oxidative stress induced by simulated sunlight, and enhances collagen expression.

An Investigation into the Effects of Processing Factors on the Properties and Scaling-Up Potential of Propranolol-Loaded Chitosan Nanogels.

Chitosan-triphosphate (TPP) nanogels are widely studied drug delivery carrier systems, typically prepared via a simple mixing process. However, the effects of the processing factors on nanogel production have not been extensively explored, despite the importance of understanding and standardising such factors to allow upscaling and commercial usage. This study aims to systematically evaluate the effects of various fabrication and processing factors on the properties of nanogels using a Design of Experiment approach. Hydrodynamic size, polydispersity index (PDI), zeta potential, and encapsulation efficiency were determined as the dependent factors. The temperature, stirring rate, chitosan grade, crosslinker choice, and the interaction term between temperature and chitosan grade were found to have a significant effect on the particle size, whereas the effect of temperature and the addition rate of crosslinker on the PDI was also noteworthy. Moreover, the addition rate of the crosslinker and the volume of the reaction vessel were found to impact the encapsulation efficiency. The zeta potential of the nanogels was found to be governed by the chitosan grade. The optimal fabrication conditions for the development of medium molecular weight chitosan and TPP nanogels included the following: the addition rate for TPP solution was set at 2 mL/min, while the solution was then stirred at a temperature of 50 °C and a stirring speed of 600 rpm. The volume of the glass vial used was 28 mL, while the stirrer size was 20 mm. The second aim of the study was to evaluate the potential for scaling up the nanogels. Size and PDI were found to increase from 128 nm to 151 nm and from 0.232 to 0.267, respectively, when the volume of the reaction mixture was increased from 4 to 20 mL and other processing factors were kept unchanged. These results indicate that caution is required when scaling up as the nanogel properties may be significantly altered with an increasing production scale.

Chitosan mediated smart photodynamic therapy based novel drug delivery systems- a futuristic view

In order to improve the pharmacological and therapeutic properties of drugs, researchers have attempted numerous novel approaches, such as stimuli-responsive systems, and targeted drug delivery systems. These systems can be attempted by nano-based drug delivery systems involving biocompatible polymers. One among which is chitosan, a linear polysaccharide, a promising potential polymer that gained interest in delivering challenging drugs. Chitosan can encapsulate and release the drugs in a controlled/sustained manner. Chitosan can be used to develop a variety of drug delivery carriers, including films, gels, nanoparticles, nanodispersions, nanomicelles, and patches. In this regimen, minimally invasive photodynamic therapy has recently gained much interest in treating vascular diseases, including cancer, ocular diseases, microbial infections, skin disorders, etc. Photodynamic therapy utilizes light excited at a specific wavelength, eliciting singlet oxygen production. Self-lighting photodynamic therapy and combination-based photodynamic therapy also offer synergistic effects. Photodynamic therapy is more selective and specific, which may offer treatment for deep-seated diseased tissues compared to conventional therapeutic modalities. Light-activated novel drug delivery formulations have been reported using various biocompatible polymers, including chitosan. Chitosan offers its effectiveness as mucoadhesiveness, tissue penetrability, antioxidant, antimicrobial properties, supports in singlet oxygen generation, and shown its benefits in photodynamic therapy. Therefore, this review presents numerous applications of chitosan-based light-activated drug delivery systems with particular emphasis on their patents and clinical trials. The literature has been collected and compiled using various search resources such as Science Direct, J-Gate, Google Scholar, PubMed, and research data.

A Novel Approach for Dermal Application of Pranoprofen-Loaded Lipid Nanoparticles for the Treatment of Post-Tattoo Inflammatory Reactions.

Recently, the number of people acquiring tattoos has increased, with tattoos gaining significant popularity in people between 20 and 40 years old. Inflammation is a common reaction associated with tattooing. The purpose of this study was to evaluate a nanostructured lipid carrier loading pranoprofen (PRA-NLC) as a tattoo aftercare formulation to reduce the inflammation associated with tattooing. In this context, the in vitro drug release and the ex vivo permeation-through-human-skin tests using Franz cells were appraised. The tolerance of our formulation on the skin was evaluated by studying the skin's biomechanical properties. In addition, an in vivo anti-inflammatory study was conducted on mice skin to evaluate the efficacy of the formulation applied topically after tattooing the animals. PRA-NLC showed a sustained release up to 72 h, and the amount of pranoprofen retained in the skin was found to be 33.48 µg/g/cm2. The formulation proved to be well tolerated; it increased stratum corneum hydration, and no signs of skin irritation were observed. Furthermore, it was demonstrated to be non-cytotoxic since the cell viability was greater than 80%. Based on these results, we concluded that PRA-NLC represents a suitable drug delivery carrier for the transdermal delivery of pranoprofen to alleviate the local skin inflammation associated with tattooing.

Photoactivatable poly(2-oxazoline)s enable antifouling hydrogel membrane coatings

In recent years, hydrophilic poly(2-oxazoline)s have been examined as an alternative polymer to poly(ethylene glycol) (PEG) with added stability and chemical versatility. They show excellent anti-fouling properties and, like PEG, are of interest in many fields where bio-inertness or anti-adhesiveness are important such as for medical devices, tissue engineering, biosensors, or drug delivery carriers. Surprisingly few studies have utilized this polymer class for the preparation of anti-fouling membranes. Here we describe a new termination reaction of the living cationic ring-opening polymerization of 2-oxazolines in which a benzophenone group is introduced as a photoactivatable terminal head group of poly(2-oxazoline)s. Using 4-vinylbenzyl chloride as initiator, heterotelechelic poly(2-methyl-2-oxazoline) (PMOXA) macromonomers were synthesized and copolymerized with hydroxyl-functional PMOXA macromonomers to yield photoactivatable PMOXA-based prepolymer bottle brushes. Likewise, star-PMOXAs were synthesized by using a trifunctional initiator. Photoactivatable PMOXA prepolymers allowed us to readily form anti-fouling hydrogels by a simple and versatile CH-insertion cross-linking (CHic) process. Hydrogels were applied to poly(ether sulfone) ultrafiltration membranes as pore coating and the pure water permeance (PWP) was investigated as a function of hydrogel architecture and cross-link density. Anti-fouling hydrogel pore-coated membranes having PWPs on the order of hundred kg·m−2·h−1·bar−1 were obtained.

Human plasma derived exosomes: Impact of active and passive drug loading approaches on drug delivery

The aim of the current study was to explore the potential of human plasma-derived exosomes as versatile carriers for drug delivery by employing various active and passive loading methods. Exosomes were isolated from human plasma using differential centrifugation and ultrafiltration method. Drug loading was achieved by employing sonication and freeze thaw methods, facilitating effective drug encapsulation within exosomes for delivery. Each approach was examined for its effectiveness, loading efficiency and ability to preserve membrane stability. Methotrexate (MTX), a weak acid model drug was loaded at a concentration of 2.2 µM to exosomes underwent characterization using various techniques such as particle size analysis, transmission electron microscopy and drug loading capacity. Human plasma derived exosomes showed a mean size of 162.15 ± 28.21 nm and zeta potential of −30.6 ± 0.71 mV. These exosomes were successfully loaded with MTX demonstrated a better drug encapsulation of 64.538 ± 1.54 % by freeze thaw method in comparison 55.515 ± 1.907 % by sonication. In-vitro drug release displayed 60 % loaded drug released within 72 h by freeze thaw method that was significantly different from that by sonication method i.e., 99 % within 72 h (p value 0.0045). Moreover, cell viability of exosomes loaded by freeze thaw method was significantly higher than that by sonication method (p value 0.0091) suggested that there was membrane disruption by sonication method. In conclusion, this study offers valuable insights into the potential of human plasma-derived exosomes loaded by freeze thaw method suggest as a promising carrier for improved drug loading and maintenance of exosomal membrane integrity.

In-depth Mechanism, Challenges, and Opportunities of Delivering Therapeutics in Brain Using Intranasal Route.

Central nervous system-related disorders have become a continuing threat to human life and the current statistic indicates an increasing trend of such disorders worldwide. The primary therapeutic challenge, despite the availability of therapies for these disorders, is to sustain the drug's effective concentration in the brain while limiting its accumulation in non-targeted areas. This is attributed to the presence of the blood-brain barrier and first-pass metabolism which limits the transportation of drugs to the brain irrespective of popular and conventional routes of drug administration. Therefore, there is a demand to practice alternative routes for predictable drug delivery using advanced drug delivery carriers to overcome the said obstacles. Recent research attracted attention to intranasal-to-brain drug delivery for promising targeting therapeutics in the brain. This review emphasizes the mechanisms to deliver therapeutics via different pathways for nose-to-brain drug delivery with recent advancements in delivery and formulation aspects. Concurrently, for the benefit of future studies, the difficulties in administering medications by intranasal pathway have also been highlighted.

Microemulsion as Novel Drug Delivery for Fungal Eye Infection

The cornea, orbit, and other ocular tissues may get infected by fungi. Ophthalmic mycoses, often known as ocular fungal infections, are a significant cause of morbidity and blindness. For fungus infections, a brand-new azole derivative has been authorized. New immunological techniques would also be beneficial in the future for enhancing patient outcomes. Treatment of ocular illnesses presents a significant barrier in terms of getting medications into the eyes using traditional drug delivery methods, such as solutions. The main barriers are those between blood and the eyes, between lachrymal fluid and the eyes, and between medication losses from the ocular surface brought on by lachrymal fluid secretion. To increase the bioavailability and lengthen the residence duration of medications administered topically to the eye, a variety of ocular drug delivery carriers have been developed. The microemulsion is created using the PHASE TITRATION METHOD. Due to the dual hydrophilic and lipophilic properties of microemulsions, the loaded medications can diffuse passively and become significantly partitioned in the varying lipophilic-hydrophilic ocular barrier. This abstract will provide details on the microemulsions used to treat fungal infections of the eyes.

Fabrication of Rhenium Disulfide/Mesoporous Silica Core-Shell Nanoparticles for a pH-Responsive Drug Release and Combined Chemo-Photothermal Therapy.

A stimuli-responsive drug delivery nanocarrier with a core-shell structure combining photothermal therapy and chemotherapy for killing cancer cells was constructed in this study. The multifunctional nanocarrier ReS2@mSiO2-RhB entails an ReS2 hierarchical nanosphere coated with a fluorescent mesoporous silica shell. The three-dimensional hierarchical ReS2 nanostructure is capable of effectively absorbing near-infrared (NIR) light and converting it into heat. These ReS2 nanospheres were generated by a hydrothermal synthesis process leading to the self-assembly of few-layered ReS2 nanosheets. The mesoporous silica shell was further coated on the surface of the ReS2 nanospheres through a surfactant-templating sol-gel approach to provide accessible mesopores for drug uploading. A fluorescent dye (Rhodamine B) was covalently attached to silica precursors and incorporated during synthesis in the mesoporous silica walls toward conferring imaging capability to the nanocarrier. Doxorubicin (DOX), a known cancer drug, was used in a proof-of-concept study to assess the material's ability to function as a drug delivery carrier. While the silica pores are not capped, the drug molecule loading and release take advantage of the pH-governed electrostatic interactions between the drug and silica wall. The ReS2@mSiO2-RhB enabled a drug loading content as high as 19.83 mg/g doxorubicin. The ReS2@mSiO2-RhB-DOX nanocarrier's cumulative drug release rate at pH values that simulate physiological conditions showed significant pH responsiveness, reaching 59.8% at pH 6.8 and 98.5% and pH 5.5. The in vitro testing using HeLa cervical cancer cells proved that ReS2@mSiO2-RhB-DOX has a strong cancer eradication ability upon irradiation with an NIR laser owing to the combined drug delivery and photothermal effect. The results highlight the potential of ReS2@mSiO2-RhB nanoparticles for combined cancer therapy in the future.

Droplet Microfluidics-Assisted Fabrication of Shape Controllable Iron-Alginate Microgels with Fluorescent Property.

Droplet-based microfluidics-assisted fabrication of alginate microgels has extensive applications in biomaterials, biomedicines, and related fields. This approach is typically achieved by crosslinking droplets of an aqueous solution of sodium alginate with various divalent and trivalent ions, such as Ca2+, Ba2+, Sr2+, etc. Despite the exceptional features exhibited by bulk alginate hydrogels when using iron ions as the crosslinking reagent, including stimulus responsiveness and complex chemistry, no attention has been given to studying the fabrication of Fe-alginate microgels through droplet microfluidics. In this work, a facile method is presented for fabricating Fe-alginate microgels using single emulsion droplets as templates and an off-chip crosslinking technique to solidify the droplets. The morphologies of the resulting microgels can be systematically adjusted by manipulating different parameters such as viscosities and ionic strength of the collecting solutions. It should be noted that these resulting microgels undergo a color change from light brown to dark brown due to presumed self-oxidation of iron ions within their skeleton structure. Furthermore, these Fe-alginate microgels are functionalized by decorating them with a positively charged linear polymer via electrostatic interactions to impart them with stable fluorescent property. These functionalized Fe-alginate microgels may find potential applications in drug delivery carriers and biomimetic structures.

Hyperosmotic cold shock mouse melanoma cells encapsulated with doxorubicin for targeted treatment of melanoma.

The primary treatment strategies for melanoma include surgical excision, chemotherapy, and radiotherapy. However, the efficacy of these treatments is often limited by drug resistance, recurrence, and severe side effects. Therefore, we aimed to develop a targeted drug delivery system capable of selectively locating tumor sites to minimize systemic toxicity and enhance therapeutic efficacy. This cell drug delivery system can also deliver chemotherapeutic drugs to the tumor microenvironment. We treated B16F10 cells with hyperosmotic cold shock (HCS) to obtain and characterize HCS cells. We then investigated the anti-tumor effects and immune activation capabilities of these cells and explored their potential as a targeted drug delivery system. HCS cells not only maintained an intact cellular structure and tumor antigens but also exhibited high expression of the homologous melanoma-associated antigen glycoprotein 100. These cells demonstrated an exceptional capacity for loading and releasing doxorubicin, which has chemotherapeutic anti-tumor effects. HCS cells can precisely target the tumor microenvironment to minimize systemic toxicity, inducing an immune response by activating CD3+ and CD4+ T cells. HCS cells are non-carcinogenic, with both cellular and tumor antigens intact; thus, they are suitable drug delivery carriers. Our findings highlight the potential of HCS cells for carrying doxorubicin because of their high drug-loading efficiency, effective tumor-targeting and anti-tumor effects. Therefore, our results will facilitate the development of melanoma treatments that have higher efficacy than those in the literature.

Bilosomes As Oral Drug Delivery Carrier

Bilosomes As Oral Drug Delivery Carrier

Role and uptake of metal-based nanoconstructs as targeted therapeutic carriers for rheumatoid arthritis.

Rheumatoid Arthritis (RA) is a chronic autoimmune systemic inflammatory disease that affects the joints and other vital organs and diminishes the quality of life. The current developments and innovative treatment options have significantly slowed disease progression and improved their quality of life. Medicaments can be delivered to the inflamed synovium via nanoparticle systems, minimizing systemic and undesirable side effects. Numerous nanoparticles such as polymeric, liposomal, and metallic nanoparticles reported are impending as a good carrier with therapeutic properties. Other issues to be considered along are nontoxicity, nanosize, charge, optical property, and ease of high surface functionalization that make them suitable carriers for drug delivery. Metallic nanoparticles (MNPs) (such as silver, gold, zinc, iron, titanium oxide, and selenium) not only act as good carrier with desired optical property, and high surface modification ability but also have their own therapeutical potential such as anti-oxidant, anti-inflammatory, and anti-arthritic properties, making them one of the most promising options for RA treatment. Regardless, cellular uptake of MNPs is one of the most significant criterions for targeting the medication. This paper discusses the numerous interactions of nanoparticles with cells, as well as cellular uptake of NPs. This review provides the mechanistic overview on MNPs involved in RA therapies and regulation anti-arthritis response such as ability to reduce oxidative stress, suppressing the release of proinflammatory cytokines and expression of LPS induced COX-2, and modulation of MAPK and PI3K pathways in Kuppfer cells and hepatic stellate cells. Despite of that MNPs have also ability to regulates enzymes like glutathione peroxidases (GPxs), thioredoxin reductases (TrxRs) and act as an anti-inflammatory agent.

Microsponges: Development, Characterization, and Key Physicochemical Properties.

Microsponges are promising drug delivery carriers with versatile characteristics and controlled release properties for the delivery of a wide range of drugs. The microsponges will provide an optimized therapeutic effect, when delivered at the site of action without rupturing, then releasing the cargo at the predetermined time and area. The ability of the microsponges to effectively deliver the drug in a controlled manner depends on the material composition. This comprehensive review entails knowledge on the design parameters of an optimized microsponge drug delivery system and the controlled release properties of microsponges that reduces the side effects of drugs. Furthermore, the review delves into the fabrication techniques of microsponges, the mechanism of drug release from the microsponges, and the regulatory requirements of the U.S. Food and Drug Administration (FDA) for the successful marketing of microsponge formulation. The review also examines the patented formulations of microsponges. The prospects of these sophisticated drug delivery systems for improved clinical outcomes are highlighted.