Double Hexamer Research Articles

Architecture of a Dodecameric Bacterial Replicative Helicase

Hexameric DnaB helicases are often loaded at DNA replication forks by interacting with the initiator protein DnaA and/or a helicase loader (DnaC in Escherichia coli). These loaders are not universally required, and DnaB from Helicobacter pylori was found to bypass DnaC when expressed in E.coli cells. The crystal structure of Helicobacter pylori DnaB C-terminal domain (HpDnaB-CTD) reveals a large two-helix insertion (named HPI) in the ATPase domain that protrudes away from the RecA fold. Biophysical characterization and electron microscopy (EM) analysis of the full-length protein show that HpDnaB forms head-to-head double hexamers remarkably similar to helicases found in some eukaryotes, archaea, and viruses. The docking of the HpDnaB-CTD structure into EM reconstruction of HpDnaB provides a model that shows how hexamerization of the CTD is facilitated by HPI-HPI interactions. The HpDnaB double-hexamer architecture supports an alternative strategy to load bacterial helicases onto forks in the absence of helicase loaders.

Inhibition of Human Papillomavirus DNA Replication by an E1-Derived p80/UAF1-Binding Peptide

The papillomavirus E1 helicase is recruited by E2 to the viral origin, where it assembles into a double hexamer that orchestrates replication of the viral genome. We previously identified the cellular WD40 repeat-containing protein p80/UAF1 as a novel interaction partner of E1 from anogenital human papillomavirus (HPV) types. p80 was found to interact with the first 40 residues of HPV type 31 (HPV31) E1, and amino acid substitutions within this domain abrogated the maintenance of the viral episome in keratinocytes. In this study, we report that these p80-binding substitutions reduce by 70% the ability of E1 to support transient viral DNA replication without affecting its interaction with E2 and assembly at the origin in vivo. Microscopy studies revealed that p80 is relocalized from the cytoplasm to discrete subnuclear foci by E1 and E2. Chromatin immunoprecipitation assays further revealed that p80 is recruited to the viral origin in an E1- and E2-dependent manner. Interestingly, overexpression of a 40-amino-acid-long p80-binding peptide, derived from HPV31 E1, was found to inhibit viral DNA replication by preventing the recruitment of endogenous p80 to the origin. Mutant peptides defective for p80 interaction were not inhibitory, demonstrating the specificity of this effect. Characterization of this E1 peptide by nuclear magnetic resonance (NMR) showed that it is intrinsically disordered in solution, while mapping studies indicated that the WD repeats of p80 are required for E1 interaction. These results provide additional evidence for the requirement for p80 in anogenital HPV DNA replication and highlight the potential of E1-p80 interaction as a novel antiviral target.

The Amino Acid Linker between the Endonuclease and Helicase Domains of Adeno-Associated Virus Type 5 Rep Plays a Critical Role in DNA-Dependent Oligomerization

The adeno-associated virus (AAV) genome encodes four Rep proteins, all of which contain an SF3 helicase domain. The larger Rep proteins, Rep78 and Rep68, are required for viral replication, whereas Rep40 and Rep52 are needed to package AAV genomes into preformed capsids; these smaller proteins are missing the site-specific DNA-binding and endonuclease domain found in Rep68/78. Other viral SF3 helicases, such as the simian virus 40 large T antigen and the papillomavirus E1 protein, are active as hexameric assemblies. However, Rep40 and Rep52 have not been observed to form stable oligomers on their own or with DNA, suggesting that important determinants of helicase multimerization lie outside the helicase domain. Here, we report that when the 23-residue linker that connects the endonuclease and helicase domains is appended to the adeno-associated virus type 5 (AAV5) helicase domain, the resulting protein forms discrete complexes on DNA consistent with single or double hexamers. The formation of these complexes does not require the Rep binding site sequence, nor is it nucleotide dependent. These complexes have stimulated ATPase and helicase activities relative to the helicase domain alone, indicating that they are catalytically relevant, a result supported by negative-stain electron microscopy images of hexameric rings. Similarly, the addition of the linker region to the AAV5 Rep endonuclease domain also confers on it the ability to bind and multimerize on nonspecific double-stranded DNA. We conclude that the linker is likely a key contributor to Rep68/78 DNA-dependent oligomerization and may play an important role in mediating Rep68/78's conversion from site-specific DNA binding to nonspecific DNA unwinding.

Building a double hexamer of DNA helicase at eukaryotic replication origins

The Mcm2‐7 complex, the catalytic core of the eukaryotic replicative DNA helicase, undergoes a complex series of transformations at origins of DNA replication. During G1 phase, it is loaded around double‐strand DNA at origins as an inactive double hexamer, which is subsequently remodelled in situ to activate the helicase during S phase. Work in this issue of The EMBO Journal sheds light on the role of the Cdt1 protein in generating Mcm2‐7 double hexamers during the loading reaction.

Multiple Cdt1 molecules act at each origin to load replication-competent Mcm2-7 helicases

Eukaryotic origins of replication are selected by loading a head-to-head double hexamer of the Mcm2-7 replicative helicase around origin DNA. Cdt1 plays an essential but transient role during this event; however, its mechanism of action is unknown. Through analysis of Cdt1 mutations, we demonstrate that Cdt1 performs multiple functions during helicase loading. The C-terminus of Cdt1 binds Mcm2-7, and this interaction is required for efficient origin recruitment of both proteins. We show that origin recognition complex (ORC) and Cdc6 recruit multiple Cdt1 molecules to the origin during helicase loading, and disruption of this multi-Cdt1 intermediate prevents helicase loading. Although dispensable for loading Mcm2-7 double hexamers that are topologically linked to DNA, the essential N-terminal domain of Cdt1 is required to load Mcm2-7 complexes that are competent for association with the Cdc45 and GINS helicase-activating proteins and replication initiation. Our data support a model in which origin-bound ORC and Cdc6 recruit two Cdt1 molecules to initiate double-hexamer formation prior to helicase loading and demonstrate that Cdt1 influences the replication competence of loaded Mcm2-7 helicases.

Structure-based design of a disulfide-linked oligomeric form of the simian virus 40 (SV40) large T antigen DNA-binding domain.

The modular multifunctional protein large T antigen (T-ag) from simian virus 40 orchestrates many of the events needed for replication of the viral double-stranded DNA genome. This protein assembles into single and double hexamers on specific DNA sequences located at the origin of replication. This complicated process begins when the origin-binding domain of large T antigen (T-ag ODB) binds the GAGGC sequences in the central region (site II) of the viral origin of replication. While many of the functions of purified T-ag OBD can be studied in isolation, it is primarily monomeric in solution and cannot assemble into hexamers. To overcome this limitation, the possibility of engineering intermolecular disulfide bonds in the origin-binding domain which could oligomerize in solution was investigated. A recent crystal structure of the wild-type T-ag OBD showed that this domain forms a left-handed spiral in the crystal with six subunits per turn. Therefore, we analyzed the protein interface of this structure and identified two residues that could potentially support an intermolecular disulfide bond if changed to cysteines. SDS-PAGE analysis established that the mutant T-ag OBD formed higher oligomeric products in a redox-dependent manner. In addition, the 1.7 Å resolution crystal structure of the engineered disulfide-linked T-ag OBD is reported, which establishes that oligomerization took place in the expected manner.

MCM2-7 Form Double Hexamers at Licensed Origins in Xenopus Egg Extract

In late mitosis and G1, Mcm2-7 are assembled onto replication origins to license them for initiation in the upcoming S phase. After initiation, Mcm2-7 provide helicase activity to unwind DNA at the replication fork. Here we examine the structure of Mcm2-7 on chromatin in Xenopus egg extracts. We show that prior to replication initiation, Mcm2-7 is present at licensed replication origins in a complex with a molecular mass close to double that of the Mcm2-7 hexamer. This complex has approximately stoichiometric quantities of the 6 Mcm2-7 proteins and we conclude that it consists of a double heterohexamer. This provides a configuration potentially capable of initiating a pair of bidirectional replication forks in S phase. We also show that after initiation, Mcm2-7 associate with Cdc45 and GINS to form a relatively stable CMG (Cdc45-MCM-GINS) complex. The CMG proteins also associate less strongly with other replication proteins, consistent with the idea that a single CMG complex forms the core of the replisome.

How to Unwind

Biochemistry During DNA replication, ring-shaped helicases use energy from ATP hydrolysis to move along and separate DNA strands, creating space for new bases to be added to the emerging template. Initiation of replication in eukaryotes involves two key steps. First, the double hexamer Mcm2-7 helicase is loaded onto duplex DNA. Second, Cdc45 and GINS associate with each hexamer to form the active CMG helicase. To gain insight into these two steps, Costa et al. determined the structures of Mcm2-7 and the full CMG helicase by single-particle electron microscopy. Structural models of Mcm2-7 showed a ring that was open between Mcm2 and Mcm5 and could either be planar or form a slight spiral. The full helicase was constrained to the planar conformation, and GINS and Cdc45 bridged the gap to form a large channel. Imaging of CMG purified in the presence of an ATP analog revealed a conformational change induced by nucleotide binding; the gap between Mcm2 and Mcm5 closed and the channel was divided into two smaller pores. The tendency of Mcm2-7 to form open rings might facilitate loading onto duplex DNA. Upon binding of Cdc45 and GINS, the structural data are consistent with a model in which CMG promotes duplex opening and accommodates a single strand in each of its pores. The two helicases loaded onto DNA could then move apart, leaving the extruded DNA between them accessible for replication. Nat. Struct. Mol. Biol. 18 , 10.1038/nsmb.2004 (2011).

A Conserved Amphipathic Helix in the N-Terminal Regulatory Region of the Papillomavirus E1 Helicase Is Required for Efficient Viral DNA Replication

The papillomavirus E1 helicase, with the help of E2, assembles at the viral origin into a double hexamer that orchestrates replication of the viral genome. The N-terminal region (NTR) of E1 is essential for DNA replication in vivo but dispensable in vitro, suggesting that it has a regulatory function. By deletion analysis, we identified a conserved region of the E1 NTR needed for efficient replication of viral DNA. This region is predicted to form an amphipathic α-helix (AH) and shows sequence similarity to portions of the p53 and herpes simplex virus (HSV) VP16 transactivation domains known as transactivation domain 2 (TAD2) and VP16C, which fold into α-helices upon binding their target proteins, including the Tfb1/p62 (Saccharomyces cerevisiae/human) subunit of general transcription factor TFIIH. By nuclear magnetic resonance (NMR) spectroscopy and isothermal titration calorimetry (ITC), we found that a peptide spanning the E1 AH binds Tfb1 on the same surface as TAD2/VP16C and with a comparable affinity, suggesting that it does bind as an α-helix. Furthermore, the E1 NTRs from several human papillomavirus (HPV) types could activate transcription in yeast, and to a lesser extent in mammalian cells, when fused to a heterologous DNA-binding domain. Mutation of the three conserved hydrophobic residues in the E1 AH, analogous to those in TAD2/VP16C that directly contact their target proteins, decreased transactivation activity and, importantly, also reduced by 50% the ability of E1 to support transient replication of DNA in C33A cells, at a step following assembly of the E1-E2-ori preinitiation complex. These results demonstrate the existence of a conserved TAD2/VP16C-like AH in E1 that is required for efficient replication of viral DNA.

Single-Molecule Studies of the Eukaryotic Replicative DNA Helicase MCM2-7

In eukaryotes, double hexamers of the replicative DNA helicase MCM2-7 are loaded onto double-stranded DNA (dsDNA) at each origin of replication in the G1 phase of the cell cycle. In S phase, numerous accessory factors activate the helicase activity of MCM2-7, leading to unwinding of the DNA template. Despite decades of study, it remains unclear how MCM2-7 unwinds DNA. One model is that upon activation, MCM2-7 goes through a conformational change to encircle single-stranded DNA (ssDNA) whereupon it translocates along one strand while excluding the other (steric exclusion). An alternative model envisions that MCM2-7 translocates along dsDNA. As DNA emerges the rear exit channel of MCM2-7, it is split by a rigid pin that bisects the channel. To distinguish between the two scenarios, we used an experimental system that allows single-molecule visualization of DNA replication in Xenopus egg extracts. We attached a quantum-dot (Qdot) to lambda DNA at a specific location that served as a road block for replication forks. Upon exposure of such Qdot-labeled lambda DNA to extracts in a microfluidic flow cell, a significant fraction of forks bypassed the Qdot when it was located on the lagging strand template but not when it was located on the leading strand template. Our results support the model that MCM2-7 translocates in the 3’ to 5’ direction along ssDNA and unwinds DNA by sterically excluding the opposite strand. Our results suggest that the large number of factors that are required to activate the MCM2-7 complex at the G1/S transition function by remodeling the MCM2-7 complex from a dsDNA binding mode to a ssDNA binding mode.

Conformational Rearrangements of SV40 Large T Antigen during Early Replication Events

The Simian virus 40 (SV40) large tumor antigen (LTag) functions as the replicative helicase and initiator for viral DNA replication. For SV40 replication, the first essential step is the assembly of an LTag double hexamer at the origin DNA that will subsequently melt the origin DNA to initiate fork unwinding. In this study, we used three-dimensional cryo-electron microscopy to visualize early events in the activation of DNA replication in the SV40 model system. We obtained structures of wild-type double-hexamer complexes of LTag bound to SV40 origin DNA, to which atomic structures have been fitted. Wild-type LTag was observed in two distinct conformations: In one conformation, the central module containing the J-domains and the origin binding domains of both hexamers is a compact closed ring. In the other conformation, the central module is an open ring with a gap formed by rearrangement of the N-terminal regions of the two hexamers, potentially allowing for the passage of single-stranded DNA generated from the melted origin DNA. Double-hexamer complexes containing mutant LTag that lacks the N-terminal J-domain show the central module predominantly in the closed-ring state. Analyses of the LTag C-terminal regions reveal that the LTag hexamers bound to the A/T-rich tract origin of replication and early palindrome origin of replication elements are structurally distinct. Lastly, visualization of DNA density protruding from the LTag C-terminal domains suggests that oligomerization of the LTag complex takes place on double-stranded DNA.

The SV40 Large T-Antigen Origin Binding Domain Directly Participates in DNA Unwinding

The origin binding domain (OBD) of SV40 large T-ag serves a critical role during initiation of DNA replication to position T-ag on the origin. After origin recognition, T-ag forms a double hexamer over the origin. Within each hexamer, the OBD adopts a lock washer structure where the origin recognizing A1 and B2 loops face toward the helicase domain and likely become unavailable for binding DNA. In this study, we investigated the role of the central channel of the OBD hexamer in DNA replication by analyzing the effects of mutations of residues lining the channel. All mutants showed binding defects with origin DNA and ssDNA especially at low protein concentrations, but only half were defective at supporting DNA replication in vitro. All mutants were normal in unwinding linear origin DNA fragments. However, replication defective mutants failed to unwind a small origin containing circular DNA whereas replication competent mutants did so normally. The presence of RPA and/or pol/prim restored circular DNA unwinding activity of compromised mutants probably by interacting with the separated DNA strands on the T-ag surface. We interpret these results to indicate a role for the OBD central channel in binding and threading ssDNA during unwinding of circular SV40 DNA. Mixing experiments suggested that only one monomer in an OBD hexamer was necessary for DNA unwinding. We present a model of DNA threading through the T-ag complex illustrating how single-stranded DNA could pass close to a trough generated by key residues in one monomer of the OBD hexamer.

Concerted Loading of Mcm2–7 Double Hexamers around DNA during DNA Replication Origin Licensing

The licensing of eukaryotic DNA replication origins, which ensures once-per-cell-cycle replication, involves the loading of six related minichromosome maintenance proteins (Mcm2-7) into prereplicative complexes (pre-RCs). Mcm2-7 forms the core of the replicative DNA helicase, which is inactive in the pre-RC. The loading of Mcm2-7 onto DNA requires the origin recognition complex (ORC), Cdc6, and Cdt1, and depends on ATP. We have reconstituted Mcm2-7 loading with purified budding yeast proteins. Using biochemical approaches and electron microscopy, we show that single heptamers of Cdt1*Mcm2-7 are loaded cooperatively and result in association of stable, head-to-head Mcm2-7 double hexamers connected via their N-terminal rings. DNA runs through a central channel in the double hexamer, and, once loaded, Mcm2-7 can slide passively along double-stranded DNA. Our work has significant implications for understanding how eukaryotic DNA replication origins are chosen and licensed, how replisomes assemble during initiation, and how unwinding occurs during DNA replication.

Putting Two Heads Together to Unwind DNA

The loading of replicative helicases onto DNA is tightly regulated in all organisms, yet the molecular mechanisms for this event remain poorly defined. Remus et al. (2009) provide important insights into helicase loading in eukaryotes, showing that the Mcm2-7 replicative helicase encircles double-stranded DNA as head-to-head double hexamers.

Double Hexamer Structure Of The Archaeal Helicase MCM From Methanobacterium Thermoautotrophicum

Hexameric DNA helicases are key enzymes in the replicative machinery. They are also an example of flexible proteins which undergo conformational changes related to their function. The minichromosome maintenance factor MCM of Methanobacterium thermoautotrophicum (mtMCM) is at present the best characterized archaeal replicative helicase, as well as a useful experimental model for the more complex eukaryotic helicases. Biochemical and crystallographic evidence indicate that the double hexamer is the functional form of mtMCM, but previous EM reports have detected assembly as single heptamer, single hexamer, or other stoichiometries.In our studies, we have observed not only 6-fold and 7-fold structures, but also open rings and double rings in the same wild type mtMCM preparation. This is an indication of polymorphism in the assembly of mtMCM, and possibly of equilibrium between these various forms. It is not clear at present, what is the functional relevance of each of the structural arrangements, although a hexameric form would correlate best with the presence of six MCM components in the eukaryotic MCM2-7 complex. The presence of open ring forms, reported here for the first time, suggests that loading of mtMCM onto DNA might be achieved through a ring opening mechanism. Such an MCM loading mechanism would be similar to that proposed for the T7 helicase or the bacterial Rho terminator, and different to that of the SV40 large T antigen, where monomers assemble around the DNA to form the hexameric rings.We also present the first three-dimensional reconstruction of the MCM double hexamer from negatively stained samples. The map allows direct observation of the dodecameric complex for the first time, and highlights characteristics similar to those found for SV40 large T antigen, such as the existence of side channels in each hexamer.

Concerted Loading of Mcm2–7 Double Hexamers around DNA during DNA Replication Origin Licensing

Concerted Loading of Mcm2–7 Double Hexamers around DNA during DNA Replication Origin Licensing

The Methanothermobacter thermautotrophicus MCM Helicase Is Active as a Hexameric Ring

The minichromosome maintenance (MCM) complex is thought to function as the replicative helicase in archaea and eukarya. The structure of the single MCM protein homologue from the archaeon Methanothermobacter thermautotrophicus is not yet clear, and hexameric, heptameric, octameric, and dodecameric structures, open rings, and filamentous structures have been reported. Using a combination of biochemical and structural analysis, it is shown here that the M. thermautotrophicus MCM helicase is active as a hexamer.

Crystal Structure of the Avian Reovirus Inner Capsid Protein σA

Avian reovirus, an important avian pathogen, expresses eight structural and four nonstructural proteins. The structural sigmaA protein is a major component of the inner capsid, clamping together lambdaA building blocks. sigmaA has also been implicated in the resistance of avian reovirus to the antiviral action of interferon by strongly binding double-stranded RNA in the host cell cytoplasm and thus inhibiting activation of the double-stranded RNA-dependent protein kinase. We have solved the structure of bacterially expressed sigmaA by molecular replacement and refined it using data to 2.3-A resolution. Twelve sigmaA molecules are present in the P1 unit cell, arranged as two short double helical hexamers. A positively charged patch is apparent on the surface of sigmaA on the inside of this helix and mutation of either of two key arginine residues (Arg155 and Arg273) within this patch abolishes double-stranded RNA binding. The structural data, together with gel shift assay, electron microscopy, and sedimentation velocity centrifugation results, provide evidence for cooperative binding of sigmaA to double-stranded RNA. The minimal length of double-stranded RNA required for sigmaA binding was observed to be 14 to 18 bp.

Identification of Amino Acids Important for the Biochemical Activity of Methanothermobacter thermautotrophicus MCM

Methanothermobacter thermautotrophicus minichromosomal maintenance protein (mtMCM) is a 75 kDa protein that self-assembles into a double hexamer structure. The double hexamer formed by the N-terminal region of mtMCM has a highly charged (overwhelmingly net positive) inner channel. Here we investigate the effects of point mutations of some of these charged residues on the biological activities of mtMCM. Although all of the mutants were similar to the wild type in protein folding and complex assembly, we found that mutations impaired helicase activity. The study of the DNA binding and ATPase activities of these mutants revealed that the impairment of the helicase activity was highly correlated with a decrease in DNA binding, providing evidence consistent with the role of these charged residues of the inner channel in interactions with DNA.

Simian Virus 40 DNA Replication Is Dependent on an Interaction between Topoisomerase I and the C-Terminal End of T Antigen

Topoisomerase I (topo I) is needed for efficient initiation of simian virus 40 (SV40) DNA replication and for the formation of completed DNA molecules. Two distinct binding sites for topo I have been previously mapped to the N-terminal (residues 83 to 160) and C-terminal (residues 602 to 708) regions of T antigen. By mutational analysis, we identified a cluster of six residues on the surface of the helicase domain at the C-terminal binding site that are necessary for efficient binding to topo I in enzyme-linked immunosorbent assay and far-Western blot assays. Mutant T antigens with single substitutions of these residues were unable to participate normally in SV40 DNA replication. Some mutants were completely defective in supporting DNA replication, and replication was not enhanced in the presence of added topo I. The same mutants were the ones that were severely compromised in binding topo I. Other mutants demonstrated intermediate levels of activity in the DNA replication assay and were correspondingly only partially defective in binding topo I. Mutations of nearby residues outside this cluster had no effect on DNA replication or on the ability to bind topo I. These results strongly indicate that the association of topo I with these six residues in T antigen is essential for DNA replication. These residues are located on the back edges of the T-antigen double hexamer. We propose that topo I binds to one site on each hexamer to permit the initiation of SV40 DNA replication.