Double Filter Research Articles

Enhancing power quality in distributed generation systems using three-phase shunt active power filter

The current paper presents a new reference current generation algorithm for shunt active power filter (SAPF) combined with distributed generation systems using the instantaneous power theory (IPT) which is organized in two main blocks. The first is the synchronization technique; we propose a new quasi open loop technique that combines a Decoupled double self-tuning filter (DDSTF) and a single-phase frequency locked loop (FLL). The DDSTF is a new technique that extracts and separates the positive and negative sequence voltage under highly unbalanced and distorted conditions with no need to the symmetrical component and/or signals delay. The FLL achieve the grid frequency adaptation. Unlike the existing frequency estimators, this technique is motivated by its simplicity and the immunity to the voltage signal amplitude and phase variation or disturbance, which is a great advantage. The second is an ADALINE in power space to separate the fundamental harmonic from the distortion harmonics of the measured currents. The effectiveness of the proposed OLS technique in their application to the SAPF is validated by simulation.

Method for Calculating the Unbalanced Current in Ungrounded Double Wye C-Type Harmonic Filters

This paper presents a methodology to calculate the neutral unbalanced current in C-type filters with an ungrounded double Wye topology; this equipment is widely used in the steel sector to mitigate the harmonic content in electrical installations caused by electric furnaces used in metal smelting processes. A common failure in these filters is the current unbalance caused by the degradation of the capacitor and inductor modules, leading to dangerous surges that affect these components, possible harmonic resonances, and deficient filtering by the equipment. Currently, there are no documented strategies for calculating the neutral current that allow for the proper adjustment of neutral protection in this type of equipment, resulting in catastrophic failures, costly unscheduled shutdowns, and potential harm to plant personnel. In this paper, we propose a methodology for calculating the unbalanced current in double Wye C-type harmonic filters, considering the natural degradation of capacitor and inductor modules and based on on-site measurements of the impedances for each element of the equipment. This allows for the predictive maintenance of these devices and the precise adjustment of neutral overcurrent protection. First, we review the operating principle of C-type harmonic filters and the neutral protection scheme. Then, the calculation methodology is proposed and validated in two practical case studies. In the first case, a 45 Mvar C-type second harmonic filter connected to a 34.5 kV bus is analyzed. In the second case, an 18.5 Mvar C-type second harmonic filter, part of a ±80 Mvar STATCOM system, connected to a 34.5 kV bus is examined. In both cases, these filters reduce the harmonic content in two steel plants: the first connected to a 400 kV bus and the second to a 230 kV bus. The results obtained with the proposed methodology were implemented in the protection device for a neutral current imbalance, considering different degradation values of the capacitors, and compared with the manufacturer’s suggested settings. The discussion highlights the good performance of the proposed methodology, particularly in terms of the protection device’s response speed to a risky unbalanced current.

A SOH estimation method of lithium-ion batteries based on partial charging data

Accurate and reliable assessment of lithium-ion battery SOH is critical to improving the safety performance of electric vehicles. In the existing data-driven methods, the models are often complex, the calculation is large and the interpretation ability is not strong, so it is difficult to realize the commercial application. In this paper, a novel SOH estimation method is proposed. Firstly, the incremental capacity (IC) curve is used to extract the aging features from part of the charging data, and a linear battery aging state space equation is established based on the features. The aging state of the battery can be directly observed under the condition of small calculation amount. Second, the aging state of the battery can be tracked and corrected by double Kalman filter to improve estimation accuracy. The performance of the proposed method is verified on CACLE dataset, Oxford dataset and DUT dataset respectively. The estimated errors are all <2.5 %, and the mean RMSE is 0.0066. The results show that the method can be effectively applied to different lithium-ion batteries. In order to further demonstrate the advantages of this estimator, we also compare it with literature methods using the same dataset. In the CACLE data set and Oxford data, the average time of this method is 0.848 s and the average RMSE is 0.0050, which is in a dominant position. The proposed method provides a simple and feasible way to estimate the SOH of electric vehicles.

Z-domain modelling and performance analysis of high contrast grating embedded micro-optical double ring-resonance filters

Z-domain modelling and performance analysis of high contrast grating embedded micro-optical double ring-resonance filters

Homonuclear J-couplings and heteronuclear structural constraints

In magic angle spinning (MAS) experiments involving uniformly 13C,15N proteins, 13C–13C and 13C–15N dipolar recoupling experiments are now routinely used to measure direct dipole–dipole couplings that constrain distances and torsion angles and determine molecular structures. When the distances are short (<4 Å), the direct couplings dominate the evolution of the spin system, and the 13C–13C and 13C–15N J-couplings (scalar couplings) are ignored. However, for structurally interesting >4 Å distances, the dipolar and J-couplings are generally of comparable magnitude, and the variation in J must be included in order to optimize the precision of the experiment. This problem is circumvented in cases with well resolved spectra by using frequency-selective dipolar recoupling methods where the effects of J-couplings are refocused. However, for larger molecules with more spectral crowding, the requisite pulse length to achieve selectivity becomes long and leads to unacceptable sensitivity losses during the pulse or the spectral overlap precludes selective excitation. In this paper, we address this problem with two approaches aimed at facilitating higher precision internuclear distance measurements in systems that are not fully resolved. Namely, (1) we describe an approach for high precision measurements of specific J-couplings using the in-phase anti-phase (IPAP) sequence which is integrated into a non-selective dipolar recoupling technique and (2) we utilize the measured J-couplings to implement a double quantum filter experiment capable of providing the resolution necessary for frequency selective dipolar recoupling techniques without resorting to multidimensional spectroscopy. We illustrate these methods using a 7-peptide segment from the amyloidogenic Sup-35p protein, U-13C/15N-GNNQQNY, where we have measured 25 of the 27 possible one bond 13C–13C J-couplings.

Wavelength calibration using MEMS-enabled double filter configuration for air gap sensing in the tunable Fabry–Pérot filter

We fabricate a microelectromechanical systems (MEMS)-based device configuring the tunable air gap Fabry–Pérot filter (FPF) with a static gradient thickness filter on the same platform. The proposed double filter configuration offers a wavelength calibration approach that accurately estimates the air gap dimension in the tunable air gap FPF. The wavelength calibration is performed by utilizing the spectrally-selective and spatially-resolved transmission characteristics of the tunable air gap FPF and the static gradient thickness filter, respectively. The MEMS-compatible chip-level integration of the static gradient thickness filter facilitates device miniaturization to enable its use in handheld devices.

#1800 Cascade filtration in severe pulmonary-kidney syndrome: an one-center experience

Abstract Background and Aims In some forms of rapidly progressive glomerulonephritis (RPGN), the effect of plasma exchange (PE) is not well understood. Cascade filtration (CF) differs from standard PE in that it uses a double filter system, where the first filter is used to separate plasma from whole blood and the second filter is used to filter high-molecular weight substances. In this study, we investigated the efficacy and safety of CF in patients with ANCA-associated vasculitis (AAV) and Goodpasture's syndrome (GPS). Method During one year we included 18 patients with RPGN whose received CF in the study. The eligibility criteria was eGFR ≤15 ml/min/1.73 m2 and/or diffuse alveolar hemorrhage (DAH), presence of antineutrophilic antibodies or anti-GBM-antibodies. CF was performed on a Plasauto Sigma using a Plasmaflo OP-05W plasma separator and a Cascadeflo EC-30W separator with a fresh frozen plasma or 25% albumin solution. All patients received immunosuppressive therapy with steroids and cyclophosphamide, one patient with AAV received rituximab due to anemia and thromobocytopenia. All data were obtained from one hospitalization with the median of 43 days. Results Eight patients with AAV and three patients with GPS met the eligibility criteria. The median age of the patients in the AAV group was 59.8 (48; 66) years, with a female to male ratio of 1:1. All patients had evidence of systemic disease: seven patients had lung damage, including DAH, two patients had arthralgia, one had purpura and one had severe sinonasal involvement. The median creatinine level was 588 µmol/l (382; 1352), dialysis was initiated in 6 patients, and the median Birmingham Vasculitis Activity Score (BVAS) was 17 (15; 20). After three procedures of CF, all patients showed positive changes on CT scan, and dialysis was stopped in three patients. The immunological response to CF was observed quite rapidly in seven patients, with decreasing ANCA titer after three exchanges and decreasing antibody levels after six exchanges in one patient. There was a significant decrease in inflammatory markers, median C-reactive protein at baseline 179 (147; 226) decreased to 23 (2.8; 30.9) mg/l (p = 0.041). The CF was well tolerated with no significant adverse events. One patient receiving rituximab died after 4 months due to a severe COVID 19 infection. Three patients with GPS, one male 23 years old and two females 56 and 60 years old, also received CF. Creatinine concentrations at baseline were 1285, 1299 and 661 µmol/l, BVAS scores were 18, 20 and 15, respectively. After three procedures of CF, there was an immunological response: decrease in antibody levels from 121 U/ml to 15 U/ml, from 88.2 to 18.4 U/ml, from &amp;gt; 200.0 to 85.4 U/ml, CRP from 252 to 0.7 mg/l, from 120 to 5 mg/l, from 81.9 to 12.58 mg/l. There were no deaths and all three patients remained on dialysis. Conclusion CF was an effective and well tolerated method of treating severe AAV and GPS in addition to immunosuppressive treatment. Possibly due to the different filtration principle and the absence of donor plasma, we did not observe any infection-related adverse events and a lower number of procedures of CF was required compared to standard plasma exchanges. Further larger studies are needed to evaluate the benefits and safety of CF in combination with immunosuppressive treatment in RPGN patients.

Active Vibration Control on a Tire-Wheel Assembly using Piezoelectric Spatial Modal Filter

Abstract Vibrations due to tire-road contact in wheeled vehicles induce acoustic discomfort especially beyond 35 km·h−1. This paper proposes an active control method to reduce the vibration transmission from the tire-road contact to the vehicle through piezoelectric transducers located directly on the wheel spokes. Our approach relies on a double spatial modal filter to physically focus the control energy on the wheel pumping mode while avoiding any spillover phenomena. In addition, a band pass controller ensures maximum damping on the targeted mode. The proposed control strategy is applied first to the clamped wheel in order to validate the static performance of the spatial controller. Then the wheel is excited through the tire and the efficiency of the controller is evaluated through the measured force passing by the wheel hub. Finally, the tire-wheel assembly (TWA) is placed on an experimental set-up recreating the vehicle operating conditions with wheel rotation at different velocities and road excitation. The experimental results confirm the efficiency of the proposed control method and its robustness to the dynamics evolution of the structure in function of the TWA angular velocity.

NIRis: A low-cost, versatile imaging system for near-infrared fluorescence detection of phototrophic cell colonies used in research and education.

A variety of costly research-grade imaging devices are available for the detection of spectroscopic features. Here we present an affordable, open-source and versatile device, suitable for a range of applications. We provide the files to print the imaging chamber with commonly available 3D printers and instructions to assemble it with easily available hardware. The imager is suitable for rapid sample screening in research, as well as for educational purposes. We provide details and results for an already proven set-up which suits the needs of a research group and students interested in UV-induced near-infrared fluorescence detection of microbial colonies grown on Petri dishes. The fluorescence signal confirms the presence of bacteriochlorophyll a in aerobic anoxygenic phototrophic bacteria (AAPB). The imager allows for the rapid detection and subsequent isolation of AAPB colonies on Petri dishes with diverse environmental samples. To this date, 15 devices have been build and more than 7000 Petri dishes have been analyzed for AAPB, leading to over 1000 new AAPB isolates. Parts can be modified depending on needs and budget. The latest version with automated switches and double band pass filters costs around 350€ in materials and resolves bacterial colonies with diameters of 0.5 mm and larger. The low cost and modular build allow for the integration in high school classes to educate students on light properties, fluorescence and microbiology. Computer-aided design of 3D-printed parts and programming of the employed Raspberry Pi computer could be incorporated in computer sciences classes. Students have been also inspired to do agar art with microbes. The device is currently used in seven different high schools in Finland. Additionally, a science education network of Finnish universities has incorporated it in its program for high school students. Video guides have been produced to facilitate easy operation and accessibility of the device.

CD3 aptamers promote expansion and persistence of tumor-reactive T cells for adoptive T cell therapy in cancer

The CD3/TCR complex is responsible for antigen-specific pathogen recognition by T cells, and initiates the signaling cascade necessary for activation of effector functions. CD3 agonistic antibodies are commonly used to expand T lymphocytes in a wide range of clinical applications, including in adoptive T-cell therapy for cancer patients. A major drawback of expanding T-cell populations ex vivo using CD3 agonistic antibodies is that they expand and activate T cells independent of their TCR antigen specificity. Therapeutic agents that facilitate expansion of T cells in an antigen-specific manner and reduce their threshold of T-cell activation, are therefore of great interest for adoptive T-cell therapy protocols. To identify CD3-specific T-cell agonists, several RNA aptamers were selected against CD3 using SELEX combined with high-throughput sequencing. The extent and specificity of aptamer binding to target CD3 were assessed through SPR, P32 double filter assays and flow cytometry. Aptamer-mediated modulation of the threshold of T-cell activation was observed in vitro and in pre-clinical transgenic TCR mouse models. The aptamers improved efficacy and persistence of adoptive T-cell therapy by low affinity TCR-reactive T lymphocytes in melanoma-bearing mice. Thus, CD3-specific aptamers can be applied as therapeutic agents which facilitate the expansion of tumor-reactive T lymphocytes while conserving their tumor specificity. Furthermore, selected CD3 aptamers also exhibit cross-reactivity to human CD3, expanding their potential for clinical translation and application in the future.

Research on Complementary Filtered Attitude Solution Method for Quadcopter Based on Double Filter Preprocessing

In the attitude calculation process of quadrotor, the traditional pre-filtering method has degraded the attitude solving accuracy due to incomplete denoising of accelerometer and gyroscope measurements. Therefore, a complementary filtered attitude solution method based on double filter pre-processing is proposed to address this problem. First, the signal decomposition, hard threshold denoising, and signal reconstruction of the accelerometer and gyroscope acquired data are performed using the Haar real-time wavelet filtering algorithm. The reconstructed signal is then filtered by the infinite impulse response ( IIR ) low-pass filtering algorithm to remove the residual high-frequency noise and complete the dual filtering preprocessing. Next, the gyroscope data is corrected with accelerometer data according to the complementary filtering algorithm. Finally, the corrected data are used to solve the quaternion and thus the attitude angle by combining the Longacurta method. The results show that the dual filtering preprocessing method can further reduce the noise in the measurements of accelerometer and gyroscope. The attitude angle results calculated by the proposed method in the static and dynamic hovering states of the four-rotor aircraft have a small degree of dispersion, which can effectively improve the accuracy of attitude calculation.

Quickly tunable ultra-narrow filter via a metal film waveguide.

The development of fast, efficient, and cost-effective tunable optical filters is a tireless pursuit of the goal in the field of optical signal processing and communications. However, the traditional filters have been limited by their complex structures, slow tuning speed, and high cost. To address this challenge, we present a tunable ultra-narrow bandpass filter, which is fabricated by a metal layer cladded in a high-parallelism and high-precision piezoelectric ceramic for an interlayer. Experimental results show a remarkable full width at half maximum of 51 pm and a fast response time of 800 ns. In addition, by cascading double filters, the wavelength of the output light has been fine-tuned from a Vernier effect. Moreover, we realize a tunable filter to select and output several ultra-narrow single peaks with 56% efficiency in the 2 nm range. Furthermore, it offers a wide tunable range, exceptional narrowband filtering performance, and fast piezoelectric response times. Hence, it is particularly well suited to applications requiring precise wavelength selection and control, opening new possibilities in the field of tunable optical filters.

Tunable double notch filter on a thin-film lithium niobate platform.

Tunable optical filters at the chip scale play a crucial role in fulfilling the need for reconfigurability in channel routing, optical switching, and wavelength division multiplexing systems. In this Letter, we propose a tunable double notch filter on thin-film lithium niobate using dual microring architecture. This unique integrated filter is essential for complex photonic integrated circuits, along with multiple channels and various frequency spacing. With only one loaded voltage, the device demonstrates a wide frequency spacing tunability from 16.1 to 89.9 GHz by reversely tuning the resonances of the two microrings while the center wavelength between the two resonances remains unaltered. Moreover, by utilizing the pronounced electro-optic properties of lithium niobate associated with the tight light confined nanophotonic waveguides, the device demonstrates a spacing tunability of 0.82 GHz/V and a contrast of 10-16 dB. In addition, the device has an ultracompact footprint of 0.0248 mm2.

Estimation of vehicle state and road surface adhesion coefficient based on double square root cubature Kalman filter

Estimation of vehicle state and road surface adhesion coefficient based on double square root cubature Kalman filter

Application of the Double Series Filter Technique for the Treatment of Acute Inferior Vena Cava Filter-Mediated Thrombosis

In this study, we examined the safety and effectiveness of removing inferior vena cava (IVC) filters with residual acute thrombosis after endovascular therapy. A retrospective chart review of 712 patients who underwent retrievable IVC filter implantation between July 2018 and December 2022 was conducted. Residual thrombosis with the IVC filter occurred in 18 patients, and the volume of residual acute thrombosis in the IVC filter exceeded 1mL in all cases. Angiography was performed to evaluate the size of the residual thrombosis and its position with respect to the filter. The double series filter technique (first filter, infrarenal IVC filter; second filter, suprarenal IVC filter) was used to remove the filter and thrombosis. We summarize the diagnosis, treatment, and surgical experience of these patients. In this study, 16 of 18 patients (88.9%) demonstrated residual thrombosis in the IVC filter. One patient (5.6%) demonstrated thrombosis located both inside and floating above the filter, and one patient (5.6%) demonstrated thrombosis located both inside and underneath the filter. The technical success rate of double series IVC filter retrieval was 100%. Seventeen patients (94.4%) underwent single-stage suprarenal IVC filter retrieval, and one patient (5.6%, 1/18) underwent two-stage retrieval. In terms of residual thrombosis removal, 14 patients (77.7%) achieved complete removal and 4 patients (22.3%) achieved partial removal. Residual thrombosis could not be removed through the sheath in one patient, so femoral vein thrombectomy was performed. No other procedure-related complications were observed. The median follow-up time was 22.5±6.8months. No recurrence of thrombus symptoms was reported, and B ultrasound and computed tomography demonstrated smooth blood flow in the IVC, renal veins, and pulmonary artery. For patients with residual acute thrombosis on the IVC filter and in whom there was absence of a more appropriate treatment after percutaneous mechanical thrombectomy or catheter-directed thrombolysis therapy, the double series IVC filter technique was a safe approach to improve the IVC filter retrieval rate in the early stage, as well as for simultaneous residual thrombus removal.

Ameliorating the Courant-Friedrichs-Lewy condition in spherical coordinates: A double FFT filter method for general relativistic MHD in dynamical spacetimes

Ameliorating the Courant-Friedrichs-Lewy condition in spherical coordinates: A double FFT filter method for general relativistic MHD in dynamical spacetimes

Expansion of the functional capacities of electrostatic mirror analyzers for electron spectroscopy

Electron spectroscopy methods are widely used in scientific research and for technological purposes. The main element of spectrometers is an analyzer of charged particle beams. Electrostatic mirror systems are widely used due to their simpler practical realization. At their development two purposes were set: to improve the quality of spatial focusing of charged particles or to increase the value of linear energy dispersion. The objects of the study are electrostatic systems characterized by small sizes, simplicity of stabilization and localization of the working field and its shielding from the external electromagnetic disturbances. From all the known types of energy analyzers, suitable for the analysis of solid surfaces, preference is given to those that have good electron-optical properties, are simple in manufacture and operation. Therefore, spherical and cylindrical mirrors, which have become a basic tool for firms producing spectrometers, have been chosen as the object of study. The work solves the problem of expansion of the functional capacities of these systems by, firstly, combining several research methods in one device; and secondly, by solving specific narrower problems. A photoelectron or Auger spectrometer with an increased scanning area is proposed, where the initial angular opening of the beam 4° after passing a cylindrical mirror is increased to 10°, and the image smearing is reduced to 0.05 %. An Auger-electron spectrometer for analysis of rough surface has been developed, which allows to increase the probing depths by more than 5 times. A double filter type energy analyzer is calculated. Energy resolution was improved to 1.37 % by eliminating potential barrier smearing in low energy filter mode. Previously, the energy resolution was limited to 10 % due to this drawback

High‐precision state of charge estimation of lithium‐ion batteries based on improved particle swarm optimization‐backpropagation neural network‐dual extended Kalman filtering

SummaryHigh‐precision state of charge (SOC) estimation is essential for battery management systems (BMSs). In this paper, a new SOC estimation method is proposed. The dual Kalman filter algorithm and backpropagation neural network (particle swarm optimization ‐ backpropagation neural network ‐ double extended Kalman filter [PSO‐BPNN‐DEKF]) are combined to estimate and correct the SOC of lithium‐ion batteries, in which the initial weight and threshold of the BPNN are optimized by particle swarm optimization algorithm. Based on the second‐order RC equivalent circuit model, parameter identification is carried out using the adaptive forgetting factor least squares (AFFRLS) method. Online parameter updates and SOC estimation are realized by DEKF algorithm. Then, the trained PSO‐BPNN is used to predict the SOC estimation error in real time, and the SOC estimation value is corrected by adding prediction errors. The SOC estimates before and after correction under Beijing Dynamic Stress Test (BBDST), dynamic stress test (DST), and hybrid pulse power characterization (HPPC) were compared. Under BBDST, DST, and HPPC tests, the maximum errors of the corrected SOC estimates are 0.0107, 0.0090, and 0.0147, respectively. The root mean square error (RMSE) of the corrected SOC estimates decreased by 94.02%, 83.18%, and 88.03%, respectively, compared with the extended Kalman filtering (EKF). The mean absolute error (MAE) of the corrected SOC estimates remained around 0.1% for all the BBDST dynamic operating conditions at different temperatures. The experimental results demonstrate the accuracy, effectiveness, and temperature adaptability of the proposed algorithm for SOC estimation under complex conditions of lithium‐ion batteries.

Fabrication of Ultra-High-Performance PVDF-HFP Air Filters by Electrospinning

This research aims to fabricate hydrophobic electrospun air filters with ultra-high performance against virions. In order to achieve this goal, constant basis weight electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) with low-bead, high-bead, and ultra-high-bead fibre structures were used to fabricate single and multilayer filters by controlling the Dimethylformamide (DMF)-to-acetone ratio of the solvent. The water contact angle of the fabricated layers ranged from 131° for low-bead structures to 135° for ultra-high-bead structures, indicating their overall high hydrophobicity. The size-resolved filtering efficiency and pressure drop tests on the fabricated filters showed that low-bead structure for both single and multilayer filters and high-bead structure for single-layer filters enhance the quality factor remarkably. The results showed that the single-layer ultra-high-bead structure air filters had a filtering efficiency of 99.33%, superior to N95 air filters (96.54%) and comparable to double N95 filters (99.86%). However, the electrospun air filter showed a pressure drop of 169.3 Pa and a quality factor of 27.6×10−3 Pa−1compared to a pressure drop of 388 Pa and quality factor of 16.9×10−3 Pa−1 for double N95 air filters. Therefore, it has a high potential to be used as the filtration media in hospitals, long-term care centers, and masks to provide superior protection against virions for healthcare providers and patients.

Trajectories of Value Generation and Capturing by Public–Private Hybrids: Mechanisms of multi-level governance in healthcare

Our paper unpacks the multi-level process through which hybrids generate value in the long term. By combining interviews, archival and survey data, we examine the longitudinal trajectories of value generation of public–private hybrids (PPHs) established in the regionalized Italian healthcare system (1992–2018). We identify three ideal-type trajectories: (a) long-term value generation by stable PPHs; (b) long-term value generation by transient PPHs; and (c) interrupted value generation by terminated PPHs. We uncover how these trajectories are shaped by the interplay between regional governance arrangements – i.e. institutionally embedded norms regarding who is entitled to generate value for the field, the scope for organizational value capturing and the institutional monitoring system – and organizational governance mechanisms – i.e. the strategic orientation of individual PPHs and their internal monitoring functions. Our paper contributes to theory by conceptualizing the mechanism of ‘double filter’, which we define as the set of field- and organizational-level governance compensatory mechanisms that, together, allow long-term value generation by hybrids. We also problematize the relationship between hybrids’ value-generation capacities and the persistence of hybrid organizational forms, and ultimately trace it to different field governance arrangements. In so doing, we conceptualize ‘transient hybrids’ as a distinctive organizational form for long-term value generation.