Double-crossover Recombination Research Articles

Efficient Production of a Thermostable Mutant of Transglutaminase by Streptomyces mobaraensis.

The transglutaminase (TGase) from Streptomyces mobaraensis is widely used to improve the texture of protein-based foods. However, wild-type TGase is not heat-resistant, which is unfavorable for its application. In this study, we successfully constructed a S. mobaraensis strain that can efficiently produce TGm2, a thermostable mutant of S. mobaraensis TGase. First, S. mobaraensis DSM40587 was subjected to atmospheric room temperature plasma mutagenesis, generating mutant smY2022 with a 12.2-fold increase in TGase activity. Then, based on the double-crossover recombination, we replaced the coding sequence of the TGase with that of TGm2 in smY2022, obtaining the strain smY2022-TGm2. The extracellular TGase activity of smY2022-TGm2 reached 61.7 U/mL, 147% higher than that of smY2022. Finally, the catalytic properties of TGm2 were characterized. The half-life time at 60 °C and specific activity of TGm2 reached 64 min and 71.15 U/mg, 35.6- and 2.9-fold higher than those of the wild-type TGase, respectively. As indicated by SDS-PAGE analysis, TGm2 exhibited demonstrably better protein cross-linking ability than the wild-type TGase at 70 °C, although both enzymes shared a similar ability at 40 °C. With improved enzyme production and thermal stability, smY2022-TGm2 could be a competitive strain for the industrial production of transglutaminase.

A Simple CRISPR/Cas9 System for Efficiently Targeting Genes of Aspergillus Section Flavi Species, Aspergillus nidulans, Aspergillus fumigatus, Aspergillus terreus, and Aspergillus niger.

For Aspergillus flavus, a pathogen of considerable economic and health concern, successful gene knockout work for more than a decade has relied nearly exclusively on using nonhomologous end-joining pathway (NHEJ)-deficient recipients via forced double-crossover recombination of homologous sequences. In this study, a simple CRISPR/Cas9 (clustered regularly interspaced short palindromic repeats/CRISPR-associated nuclease) genome editing system that gave extremely high (>95%) gene-targeting frequencies in A. flavus was developed. It contained a shortened Aspergillus nidulans AMA1 autonomously replicating sequence that maintained good transformation frequencies and Aspergillus oryzae ptrA as the selection marker for pyrithiamine resistance. Expression of the codon-optimized cas9 gene was driven by the A. nidulans gpdA promoter and trpC terminator. Expression of single guide RNA (sgRNA) cassettes was controlled by the A. flavus U6 promoter and terminator. The high transformation and gene-targeting frequencies of this system made generation of A. flavus gene knockouts with or without phenotypic changes effortless. Additionally, multiple-gene knockouts of A. flavus conidial pigment genes (olgA/copT/wA or olgA/yA/wA) were quickly generated by a sequential approach. Cotransforming sgRNA vectors targeting A. flavus kojA, yA, and wA gave 52%, 40%, and 8% of single-, double-, and triple-gene knockouts, respectively. The system was readily applicable to other section Flavi aspergilli (A. parasiticus, A. oryzae, A. sojae, A. nomius, A. bombycis, and A. pseudotamarii) with comparable transformation and gene-targeting efficiencies. Moreover, it gave satisfactory gene-targeting efficiencies (>90%) in A. nidulans (section Nidulantes), A. fumigatus (section Fumigati), A. terreus (section Terrei), and A. niger (section Nigri). It likely will have a broad application in aspergilli. IMPORTANCE CRISPR/Cas9 genome editing systems have been developed for many aspergilli. Reported gene-targeting efficiencies vary greatly and are dependent on delivery methods, repair mechanisms of induced double-stranded breaks, selection markers, and genetic backgrounds of transformation recipient strains. They are also mostly strain specific or species specific. This developed system is highly efficient and allows knocking out multiple genes in A. flavus efficiently either by sequential transformation or by cotransformation of individual sgRNA vectors if desired. It is readily applicable to section Flavi species and aspergilli in other sections ("section" is a taxonomic rank between genus and species). This cross-Aspergillus section system is for wild-type isolates and does not require homologous donor DNAs to be added, NHEJ-deficient strains to be created, or forced recycling of knockout recipients to be performed for multiple-gene targeting. Hence, it simplifies and expedites the gene-targeting process significantly.

Bacillus integrative plasmid system combining a synthetic gene circuit for efficient genetic modifications of undomesticated Bacillus strains

BackgroundOwing to CRISPR-Cas9 and derivative technologies, genetic studies on microorganisms have dramatically increased. However, the CRISPR-Cas9 system is still difficult to utilize in many wild-type Bacillus strains owing to Cas9 toxicity. Moreover, less toxic systems, such as cytosine base editors, generate unwanted off-target mutations that can interfere with the genetic studies of wild-type strains. Therefore, a convenient alternative system is required for genetic studies and genome engineering of wild-type Bacillus strains. Because wild-type Bacillus strains have poor transformation efficiencies, the new system should be based on broad-host-range plasmid-delivery systems.ResultsHere, we developed a Bacillus integrative plasmid system in which plasmids without the replication initiator protein gene (rep) of Bacillus are replicated in a donor Bacillus strain by Rep proteins provided in trans but not in Bacillus recipients. The plasmids were transferred to recipients through a modified integrative and conjugative element, which is a wide host range plasmid-delivery system. Genetic mutations were generated in recipients through homologous recombination between the transferred plasmid and the genome. The system was improved by adding a synthetic gene circuit for efficient screening of the desired mutations by double crossover recombination in recipient strains. The improved system exhibited a mutation efficiency of the target gene of approximately 100% in the tested wild-type Bacillus strains.ConclusionThe Bacillus integrative plasmid system developed in this study can generate target mutations with high efficiency when combined with a synthetic gene circuit in wild-type Bacillus strains. The system is free of toxicity and unwanted off-target mutations as it generates the desired mutations by traditional double crossover recombination. Therefore, our system could be a powerful tool for genetic studies and genome editing of Cas9-sensitive wild-type Bacillus strains.

Highly efficient CRISPR/Cas9 system in Plasmodium falciparum using Cas9-expressing parasites and a linear donor template

The CRISPR/Cas9 system is a powerful genetic engineering technology for Plasmodium falciparum. We here report further improvement of the CRISPR/Cas9 system by combining the Cas9-expressing parasite with a liner donor template DNA. The Cas9-expressing parasite was generated by inserting the cas9 gene in the genome by double crossover recombination. The site-directed mutagenesis and the fusion of fluorescence protein was achieved within two weeks with high efficiency (> 85%), by transfecting the schizonts of the Cas9-expressing parasite with the liner donor template and the plasmid carrying the sgRNAs. Notably, there were neither off-target mutations in the resultant transgenic parasites nor unexpected recombination, that are the technical problems of the current CRISPR/Cas9 system. Furthermore, with our system, two genes on different chromosomes were successfully modified in single transfection. Because of its high efficiency and robustness, our improved CRISPR/Cas9 system will become a standard technique for genetic engineering of P. falciparum, which dramatically advances future studies of this parasite.

Single-plasmid systems based on CRISPR-Cas9 for gene editing in Lactococcus lactis

Lactococcus lactis is a food-grade lactic acid bacterial species that is widely used in food and medical industries. Due to its relatively small genome and simple metabolism, L. lactis is commonly engineered to produce large quantities of recombinant proteins. The most common single-gene knockout strategy in L. lactis involves RecA-dependent homologous double-crossover recombination, which is relatively time-consuming and laborious. In this study, a precise and efficient genome-editing plasmid for L. lactis NZ9000 genome engineering, pLL, was established based on clustered regularly interspaced short palindromic repeats (CRISPR)-Cas9 technology. By studying the effects of different single guide RNA (sgRNA) promoters, the efficiency of gene deletion was optimized. For LLNZ_02045 (ldh), gene deletion efficiency of up to 50% was achieved. Effective sequential gene deletion of LLNZ_11240 (upp) and LLNZ_04580 (upp1) was also demonstrated using this tool. Additionally, the gene that encodes for uracil phosphoribosyltransferase was identified using this system. Similar robust gene deletion efficiencies of sgRNA that targeted different regions of a single gene suggested that gene deletion was not affected by the location of sgRNA binding. Thus, our study established a new gene-editing tool that may allow further investigation and understanding of the L. lactis NZ9000 genome.

Development of a pyrF-based counterselectable system for targeted gene deletion in Streptomyces rimosus.

Streptomyces produces many valuable and important biomolecules with clinical and pharmaceutical applications. The development of simple and highly efficient gene editing tools for genetic modification of Streptomyces is highly desirable. In this study, we developed a screening system for targeted gene knockout using a uracil auxotrophic host (ΔpyrF) resistant to the highly toxic uracil analog of 5-fluoroorotic acid (5-FOA) converted by PyrF, and a non-replicative vector pKC1132-pyrF carrying the complemented pyrF gene coding for orotidine-5'-phosphate decarboxylase. The pyrF gene acts as a positive selection and counterselection marker for recombinants during genetic modifications. Single-crossover homologous integration mutants were selected on minimal medium without uracil by reintroducing pyrF along with pKC1132-pyrF into the genome of the mutant ΔpyrF at the targeted locus. Double-crossover recombinants were generated, from which the pyrF gene, plasmid backbone, and targeted gene were excised through homologous recombination exchange. These recombinants were rapidly screened by the counterselection agent, 5-FOA. We demonstrated the feasibility and advantage of using this pyrF-based screening system through deleting the otcR gene, which encodes the cluster-situated regulator that directly activates oxytetracycline biosynthesis in Streptomyces rimosus M4018. This system provides a new genetic tool for investigating the genetic characteristics of Streptomyces species.

Engineering Bacillus subtilis ATCC 6051a for the production of recombinant catalases.

Catalases are a large group of enzymes that decompose hydrogen peroxide to oxygen and hydrogen, and have been applied widely in numerous areas. Bacillus subtilis ATCC 6051a is a well-known host strain for high level secretion of heterologous peptides. However, the application of 6051a was seriously hampered by insufficient transformation efficiency. In this study, D-xylose inducible comK was integrated into the genome of B. subtilis ATCC 6051a, generating 164S, a mutant owns a transformation efficiency of 1 000-fold higher than its parent strain, thus allowing gene replacement by double crossover recombination using linear dsDNAs. The efficiency of the flanking arms for homologous recombination was then analyzed. We found that 400 bp was the minimal length of homologous fragments required to initiate efficient recombination in the 164S strain. In addition, DNA cassettes encoding two mesophilic catalases (Orf 2-62 and Orf 2-63) from B. licheniformis were integrated onto 164S. The catalytic properties of recombinant Orf 2-62 and Orf 2-63 were analyzed, and were found to be predominantly secreted into the fermentation broth, although they obviously lack any known secretory signal peptide. This work demonstrated that B. subtilis 164S is an excellent cell tool, not only for its superior secretion capacity, but also for its convenience in genetic modification.

Molecular Biology Methods in Streptomyces rimosus, a Producer of Oxytetracycline.

Streptomyces rimosus is used for production of the broad-spectrum antibiotic oxytetracycline (OTC). S. rimosus belongs to Actinomyces species, a large group of microorganisms that produce diverse set of natural metabolites of high importance in many aspects of our life. In this chapter, we describe specific molecular biology methods and a classical homologous recombination approach for targeted in-frame deletion of a target gene or entire operon in S. rimosus genome. The presented protocols will guide you through the design of experiment and construction of homology arms and their cloning into appropriate vectors, which are suitable for gene-engineering work with S. rimosus. Furthermore, two different protocols for S. rimosus transformation are described including detailed procedure for targeted gene replacement via double crossover recombination event. Gene deletion is confirmed by colony PCR, and colonies are further characterized by cultivation and metabolite analysis. As the final step, we present in trans complementation of the deleted gene, to confirm functionality of the engineering approach achieved by gene disruption. A number of methodological steps and protocols are optimized for S. rimosus strains including the use of the selected reporter genes. Protocols described in this chapter can be applied for studying function of any individual gene product in diverse OTC-producing Streptomyces rimosus strains.

Counter-Selection Method for Markerless Allelic Exchange in Bordetella bronchiseptica Based on sacB Gene From Bacillus subtilis.

Bordetella bronchiseptica is a gram-negative bacterium that causes respiratory tract infections. It is a natural pathogen of a wide variety of mammals, including some used as laboratory models. This makes B. bronchiseptica an ideal organism to study pathogen-host interactions in order to unveil molecular mechanisms behind pathogenic processes. Even though genetic engineering is an essential tool in this area, there are just a few reports about genome manipulation techniques in this organism. In this article we describe an allelic exchange protocol based on double crossover recombination facilitated by the Bacillus subtilis sacB gene that can be applied for partial or complete gene knockouts, single-nucleotide mutations, or even introduction of coding sequences for transcriptional fusions. In contrast to previously employed techniques, this protocol renders genetically manipulated chromosomes without foreign DNA and enables the construction of successive genome manipulation using the same vector backbone. The entire procedure has been developed for fast and reliable manipulations with a total duration of 2 weeks. © 2020 Wiley Periodicals LLC. Basic Protocol 1: Setting up strains Basic Protocol 2: Homologous recombination (first crossing-over) Alternate Protocol: B. bronchiseptica electroporation Basic Protocol 3: Screening for sucrose-sensitive clones Basic Protocol 4: Homologous recombination (second crossing-over) Basic Protocol 5: PCR screening of putative marker-exchange mutants Support Protocol: Electrocompetent cell preparation.

High frequency of double crossover recombination facilitates genome engineering in Pseudomonas aeruginosa PA14 and clone C strains

Pseudomonas aeruginosa is a key opportunistic human pathogen. An established procedure to replace a target gene is two-step allelic exchange, i.e. selection of single crossover at homologous sequences and subsequent counter selection to induce double crossover for excision of the suicide vector. In this study, we found that certain strains of P. aeruginosa display a high rate of instant double crossover upon introduction of a suicide vector containing an antibiotic resistance cassette flanked by adjacent sequences for gene replacement, making the counter selection step to achieve the second crossover superfluous. Assessment of a limited panel of target genes commonly showed negligible double crossover with a frequency <20 % in the genetic reference strain PAO1, whereas a high double crossover frequency of >70 % was observed for PA14 and clone C strains. Consequently, for certain P. aeruginosa strains replacement of an ORF by a antibiotic resistance cassette can be shortened by directly selecting for double crossover recombination.

Optimization of RK2-based gene introduction system for Bacillus subtilis.

The Gram-positive bacterium Bacillus subtilis plays important roles in both industrial applications and basic research. However, transformation of competent B. subtilis cells is more difficult to achieve compared with that of Escherichia coli. It has been reported that the conjugative broad host range plasmid RK2 can be transferred to various organisms, including B. subtilis. Nevertheless, the protocol for conjugation from E. coli to B. subtilis has not been properly established. Thus, we optimized interspecies conjugation from E. coli to B. subtilis using the RK2 system. We constructed mobilizable shuttle and integrative vectors pEB1 and pEB2, respectively. pEB1 was used to evaluate the effect of mating media, time, temperature, and genetic background of the recipient and donor strains. We found that conjugation was not significantly affected by the conjugation time or genetic background of the recipient and donor strains. Conjugation on agar was more efficient than that in a liquid medium. A low temperature (16°C and lower) drastically decreased conjugation efficiency. When using the optimized protocol for homologous recombination after conjugation, we could not obtain double crossover mutants, as only single crossover mutants were observed in the initial selection. We then established a two-step homologous recombination method whereby positive colonies were cultivated further, which finally allowed efficient yield of double crossover recombinants. The optimized conjugation method described here allowed facility and efficient gene introduction into B. subtilis from E. coli.

Engineering Salinispora tropica for heterologous expression of natural product biosynthetic gene clusters.

The marine actinomycete genus Salinispora is a remarkably prolific source of structurally diverse and biologically active secondary metabolites. Herein, we select the model organism Salinispora tropica CNB-440 for development as a heterologous host for the expression of biosynthetic gene clusters (BGCs) to complement well-established Streptomyces host strains. In order to create an integratable host with a clean background of secondary metabolism, we replaced three genes (salA-C) essential for salinosporamide biosynthesis with a cassette containing the Streptomyces coelicolor ΦC31 phage attachment site attB to generate the mutant S. tropica CNB-4401 via double-crossover recombination. This mutagenesis not only knocks-in the attachment site attB in the genome of S. tropica CNB-440 but also abolishes production of the salinosporamides, thereby simplifying the strain's chemical background. We validated this new heterologous host with the successful integration and expression of the thiolactomycin BGC that we recently identified in several S. pacifica strains. When compared to the extensively engineered superhost S. coelicolor M1152, the production of thiolactomycins from S. tropica CNB-4401 was approximately 3-fold higher. To the best of our knowledge, this is the first example of using a marine actinomycete as a heterologous host for natural product BGC expression. The established heterologous host may provide a useful platform to accelerate the discovery of novel natural products and engineer biosynthetic pathways.

Application of methylation in improving plasmid transformation into Helicobacter pylori

Helicobacter pylori is an important gastrointestinal pathogen. Its strains possess different levels of powerful restriction modification systems, which are significant barriers to genetic tools used for studying the role of functional genes in its pathogenesis. Methylating vectors in vitro was reported as an alternative to overcome this barrier in several bacteria. In this study we used two H. pylori-E. coli shuttle plasmids and several single/double-crossover homologous recombination gene-targeting plasmids, to test the role of methylation in H. pylori transformation. According to our results, transformants could be obtained only after shuttle plasmids were methylated before transformation. It is helpful in gene complementation and over-expression although at a low frequency. The frequency of gene-targeting transformation was also increased after methylation, especially for the single-crossover recombination plasmids, the transformants of which could only be obtained after methylation. For the double-crossover recombination targeting plasmids, the initial yield of transformants was 0.3–0.8 × 102 CFUs per microgram plasmid DNA. With the help of methylation, the yield was increased to 0.4–1.3 × 102 CFUs per microgram plasmid DNA. These results suggest that in vitro methylation can improve H. pylori transformation by different plasmids, which will benefit the pathogenic mechanism research.

Development and evaluation of an efficient heterologous gene knock-in reporter system in Lactococcus lactis

BackgroundLactococcus lactis is a food grade probiotics and widely used to express heterologous proteins. Generally, target genes are knocked into the L. lactis genome through double-crossover recombination to express heterologous proteins stably. However, creating marker-less heterologous genes knocked-in clones is laborious. In this study, an efficient heterologous gene knock-in reporter system was developed in L. lactis NZ9000.ResultsOur knock-in reporter system consists of a temperature-sensitive plasmid pJW and a recombinant L. lactis strain named NZB. The pJW contains homologous arms, and was constructed to knock-in heterologous genes at a fixed locus of NZ9000 genome. lacZ (β-galactosidase) gene was knocked into the chromosome of NZ9000 as a counter-selective marker through the plasmid pJW to generate NZB. The engineered NZB strain formed blue colonies on X-Gal plate. The desired double-crossover mutants formed white colonies distinctive from the predominantly blue colonies (parental and plasmid-integrated clones) when the embedded lacZ was replaced with the target heterologous genes carried by pJW in NZB.ConclusionsBy using the system, the heterologous gene knocked-in clones are screened by colony phenotype change rather than by checking colonies individually. Our new knock-in reporter system provides an efficient method to create heterologous genes knocked-in clones.

Cas9 Nickase-Assisted RNA Repression Enables Stable and Efficient Manipulation of Essential Metabolic Genes in Clostridium cellulolyticum.

Essential gene functions remain largely underexplored in bacteria. Clostridium cellulolyticum is a promising candidate for consolidated bioprocessing; however, its genetic manipulation to reduce the formation of less-valuable acetate is technically challenging due to the essentiality of acetate-producing genes. Here we developed a Cas9 nickase-assisted chromosome-based RNA repression to stably manipulate essential genes in C. cellulolyticum. Our plasmid-based expression of antisense RNA (asRNA) molecules targeting the phosphotransacetylase (pta) gene successfully reduced the enzymatic activity by 35% in cellobiose-grown cells, metabolically decreased the acetate titer by 15 and 52% in wildtype transformants on cellulose and xylan, respectively. To control both acetate and lactate simultaneously, we transformed the repression plasmid into lactate production-deficient mutant and found the plasmid delivery reduced acetate titer by more than 33%, concomitant with negligible lactate formation. The strains with pta gene repression generally diverted more carbon into ethanol. However, further testing on chromosomal integrants that were created by double-crossover recombination exhibited only very weak repression because DNA integration dramatically lessened gene dosage. With the design of a tandem repetitive promoter-driven asRNA module and the use of a new Cas9 nickase genome editing tool, a chromosomal integrant (LM3P) was generated in a single step and successfully enhanced RNA repression, with a 27% decrease in acetate titer on cellulose in antibiotic-free medium. These results indicate the effectiveness of tandem promoter-driven RNA repression modules in promoting gene repression in chromosomal integrants. Our combinatorial method using a Cas9 nickase genome editing tool to integrate the gene repression module demonstrates easy-to-use and high-efficiency advantages, paving the way for stably manipulating genes, even essential ones, for functional characterization and microbial engineering.

Gene Replacement and Fluorescent Labeling to Study the Functional Role of Exopolysaccharides in Bifidobacterium animalis subsp. lactis.

An extracellular layer of exopolysaccharides (EPS) covers the surface of some Bifidobacterium animalis subsp. lactis strains, which could be of relevance for its probiotic performance. In order to understand the functional characteristics of B. animalis subsp. lactis, two isogenic strains that differ in their EPS-producing phenotype, due to a single mutation in the gene Balat_1410, were studied. By means of a double crossover recombination strategy, successfully used for the first time in bifidobacteria, Balat_1410 in the type strain B. animalis subsp. lactis DSM10140 was replaced by a mutated gene containing a non-synonymous mutation previously associated with the appearance of a mucoid-ropy phenotype. Nuclear magnetic resonance and SEC-MALS analyses showed that the novel strain harboring the mutation acquired a ropy phenotype, due to the production of a high molecular weight (HMW)-EPS that is not produced in the wild-type strain. Fluorescence labeling of both strains with two fluorescent proteins, m-Cherry and Green Fluorescent Protein, was achieved by expressing the corresponding genes under the control of a native selected promoter (the elongation factor Tu promoter). Remarkably, qualitative and quantitative fluorescence analyses demonstrated that the ropy strain displays a lower capability to adhere to human intestinal epithelial cells. In addition, the presence of the HMW-EPS reduced the capability of the producing strain to form biofilms upon three different abiotic surfaces. This work also highlights the fact that different EPS confer variable functional characteristics to the bifidobacterial surface, which may be relevant for the performance of B. animalis subsp. lactis as a probiotic. The construction of molecular tools allowing the functional characterization of surface structures in next generation probiotics is still a challenging issue that deserves further attention, given the relevant role that such molecules must play in the interaction with the host.

High-Frequency Targeted Mutagenesis in Pseudomonas stutzeri Using a Vector-Free Allele-Exchange Protocol.

The complexity of the bacterial recombination system is a barrier for the construction of bacterial mutants for the further functional investigation of specific genes. Several protocols have been developed to inactivate genes from the genus Pseudomonas. Those protocols are complicated and time-consuming and mostly do not enable easy construction of multiple knock-ins/outs. The current study describes a single and double crossover-recombination system using an optimized vector-free allele-exchange protocol for gene disruption and gene replacement in a single species of the family Pseudomonadaceae. The protocol is based on self-ligation (circularization) for the DNA cassette which has been obtained by overlapping polymerase chain reaction (Fusion-PCR), and carries an antibiotic resistance cassette flanked by homologous internal regions of the target locus. To establish the reproducibility of the approach, three different chromosomal genes (ncRNA31, rpoN, rpoS) were knocked-out from the root-associative bacterium Pseudomonas stutzeri A1501. The results showed that the P. stutzeri A1501 mutants, which are free of any plasmid backbone, could be obtained via a single or double crossover recombination. In order to optimize this protocol, three key factors that were found to have great effect on the efficiency of the homologous recombination were further investigated. Moreover, the modified protocol does not require further cloning steps, and it enables the construction of multiple gene knock-in/out mutants sequentially. This work provides a simple and rapid mutagenesis strategy for genome editing in P. stutzeri, which may also be applicable for other gram-negative bacteria.

Construction of Novel Plasmid Vectors for Gene Knockout in Helicobacter pylori.

Helicobacter pylori infection plays an important role in the etiology of various gastroduodenal diseases. However, pathogenic mechanism of H. pylori is not clear. More potential pathogenic factors need to be further discovered and studied. In this study, two vectors for generating double-crossover recombination gene knockout plasmids in H. pylori were designed based on the backbone of plasmid pLYL03. Genes on plasmid pLYL03 were rearranged, and the redundant sequences were reduced. Erythromycin-resistant gene on pLYL03 was replaced by aphA or catGC to generate the kanamycin-resistant plasmid pSJHK or the chloramphenicol-resistant plasmid pSJHC. The sizes of pSJHK and pSJHC are 4371 and 3949 bp, respectively. Based on plasmids pSJHK and pSJHC, double-crossover recombination gene knockout plasmids targeting hp0169 and hp0788 were constructed, and deletion mutants were achieved by electroporation of the gene-targeting plasmids. The results indicated that plasmids pSJHK and pSJHC are efficient for gene deletion in H. pylori, and the transformation efficiency of pSJHC is slightly higher than pSJHK. These plasmids provide convenient genetic tools for further research of novel pathogenic factors in H. pylori. Derivative plasmids developed by changing antibiotic-resistant genes would also provide valuable tools for the study of functional genes in other bacteria.

A shuttle vector series for precise genetic engineering of Saccharomyces cerevisiae.

Shuttle vectors allow for an efficient transfer of recombinant DNA into yeast cells and are widely used in fundamental research and biotechnology. While available shuttle vectors are applicable in many experimental settings, their use in quantitative biology is hampered by insufficient copy number control. Moreover, they often have practical constraints, such as limited modularity and few unique restriction sites. We constructed the pRG shuttle vector series, consisting of single- and multi-copy integrative, centromeric and episomal plasmids with marker genes for the selection in all commonly used auxotrophic yeast strains. The vectors feature a modular design and a large number of unique restriction sites, enabling an efficient exchange of every vector part and expansion of the series. Integration into the host genome is achieved using a double-crossover recombination mechanism, resulting in stable single- and multi-copy modifications. As centromeric and episomal plasmids give rise to a heterogeneous cell population, an analysis of their copy number distribution and loss behaviour was performed. Overall, the shuttle vector series supports the efficient cloning of genes and their maintenance in yeast cells with improved copy number control.

Utilization of a reporter system based on the blue pigment indigoidine biosynthetic gene bpsA for detection of promoter activity and deletion of genes in Streptomyces

The integrative promoter-probe plasmid pBPSA1 was constructed using a promoterless Streptomyces aureofaciens CCM3239 bpsA gene encoding a non-ribosomal peptide synthase for the biosynthesis of a blue pigment, indigoidine. bpsA was also used to prepare pAMR4 plasmid for the deletion of genes in Streptomyces with facile identification of double crossover recombination.