Acoustic Doppler Current Profiler Research Articles

Evaluating water availability and flow characteristics for Dikrong river in Arunachal Pradesh using Acoustic Doppler Current Profiler

Evaluating water availability and flow characteristics for Dikrong river in Arunachal Pradesh using Acoustic Doppler Current Profiler

Mooring observations of tidal currents in the Jailolo Strait of the Indonesian seas

The vertical structure of internal tidal currents in the Jailolo Strait of the Indonesian seas is studied using the year-long mooring observations with two Acoustic Doppler Current Profiler instruments looking upward and downward, respectively, coving the full depth of the strait. The barotropic tides are extracted from the full-depth current profile measurements, showing the dominant M2, K1, and O1 tidal currents with amplitudes of 13.5 cm s−1, 11.0 cm s−1 and 7.6 cm s−1, in nearly reciprocating movement in the direction of 34.5°, 63.1°, and 75.2° clockwise from due north. The internal tidal currents in the Jailolo Strait contributing to about 50% of the total kinetic energy are found to be dominated by the low baroclinic modes, with M2 tide as the most dominant tidal constituent. High-frequency internal tides of D3 and D4 are observed, with baroclinic structure similar to that of M2 tides, and are suggested to be stimulated by nonlinear processes. The complicated vertical structure of tidal currents in the Jailolo Strait is disclosed for the first time in history. Its potential impact on vertical turbulent mixing suggests its importance in global ocean circulation and climate.

Application of coastal acoustic tomography: calibration of open boundary conditions on a numerical ocean model for tidal currents

Coastal acoustic tomography (CAT), which measures path-averaged currents from reciprocal acoustic transmission experiments and reconstructs velocity fields from the multiple path-averaged current data, is useful for monitoring tidal currents in coastal shallow water, especially if data assimilation is employed. Previous CAT data assimilation studies have focused on state estimation problems, i.e., the reconstruction of tidal currents and following dynamical discussion. In this study, we investigate the use of path-averaged currents in a boundary control problem. Specifically, we aim to use the observed path-averaged currents to determine the parameters of a numerical ocean model, which were tidal amplitudes and phases as the open boundary conditions in this study. We investigate two methods: using the ensemble Kalman filter (EnKF) results and a linearization approach called model Green’s function method. Both calibration methods decreased the amplitudes of tidal constituents at the open boundaries. We compare the model performance between the model predictions with and without the calibration of the open boundary conditions. The model predictions with the calibrated open boundary conditions improved the agreement with the observed path-averaged current. We also implemented the sequential updates of EnKF with the two calibrated open boundary conditions. The EnKF results with the independently calibrated two open boundary conditions improved the agreement with the comparison data obtained by acoustic Doppler current profiler measurement compared with the original EnKF result with the initial open boundary conditions.

Analysis of Currents in Open Water Southwest of Lae Lae Island

Ocean currents are one of the movements of horizontal or vertical mass movement of seawater that takes place continuously. The purpose of this study is to determine current conditions in open water close to narrow strait waters, as well as canal estuaries. Current data is the result of measurements that have been carried out using ADCP (Acoustic Doppler Current Profiler) mini type ADP-SONTEK equipment on May 16, 2018, while tidal data refers to the recording results of the Makassar BIG tidal station. The results showed that the total surface current speed ranged from 0.017 – 0.375 m/sec with a dominant direction to the west or to open water both at high tide and at low tide. While the result of separation, the speed of tidal currents ranges from 0.032 – 0.343 m / sec.

The Brazil current cyclonic meandering and shelf-slope water exchanges at 27°S–31°S

The Brazil Current (BC) experiences intense mesoscale activity from its origin on the northeastern Brazilian coast till it reaches the Brazil-Malvinas Confluence. The BC meandering behavior near the Cape Santa Marta (27°S – 31°S), has not been well described in the literature. In this study, in situ observations and satellite images are used to describe the BC meanders and cyclonic eddies near the cape. The results obtained from two Lowered Acoustic Doppler Current Profilers (LADCP) sections show that these structures are surface intensified but extend through the whole water column. Conductivity Temperature and Depth (CTD) profiles show evidence of coastal water trapping inside an eddy. Altimeter data show two hot spots of cyclones, one at 28.5°S and the other at 30.5°S, with an average of ∼5 and 7 eddies per year, respectively. The eddies generated on both sites have a mean lifetime of 37 days, and no significant differences were found between their surface properties. Satellite images of chlorophyll show that coastal water horizontal advection is a recurrent phenomenon in these eddies, imprinting an eddy stirring signal into their average composites. Furthermore, using Empirical Orthogonal Functions to analyze the BC flow in a mooring line, we observed that the mesoscales meanders are responsible for explaining at least 1/3 of the flow variability in this area.

Spatially quantifying and mapping the riverbed roughness of a tropical river via acoustic Doppler current profiler (ADCP) measurements to develop a 2-D numerical model

Field measurement of the bed roughness of tropical tidal rivers is a long and expensive process. In this study, we quantified the roughness coefficient from the acoustic Doppler current profiler (ADCP) measurements considering flow characteristics along a 240 km length of the Vu Gia Thu Bon River system, in central Vietnam. Our approach entailed the application of the logarithmic velocity distribution trend of turbulent flows to determine the bottom roughness height. Then, we applied the equation suggested by Strickler (1923) to calculate the Manning roughness coefficient. The TELEMAC-2D hydraulic model was then used to simulate the effect of the roughness coefficient on the estimated water level. Despite its uncertainty, the estimated bed roughness was sufficient for the accurate calculation of the hydraulic variables. Compared to those in previous research, the statistical indicators showed good performance in the first simulation process during both the calibration and validation periods along the river system.

High-Frequency Surface Wave Radar Current Measurement Corrections via Machine Learning and Towed Acoustic Doppler Current Profiler Integration

High-Frequency Surface Wave Radar Current Measurement Corrections via Machine Learning and Towed Acoustic Doppler Current Profiler Integration

Grid Turbulence Measurements with an Acoustic Doppler Current Profiler

The motivation for this study is to investigate the abilities and limitations of a Nortek Signature1000 acoustic Doppler current profiler (ADCP) regarding fine-scale turbulence measurements. Current profilers offer the advantage of gaining more coherent measurement data than available with point acoustic measurements, and it is desirable to exploit this property in laboratory and field applications. The ADCP was tested in a towing tank, where turbulence was generated from a grid towed under controlled conditions. Grid-induced turbulence is a well-studied phenomenon and a good approximation for isotropic turbulence. Several previous experiments are available for comparison and there are developed theories within the topic. In the present experiments, a Nortek Vectrino acoustic Doppler velocimeter (ADV), which is an established instrument for turbulence measurements, was applied to validate the ADCP. It was found that the mean flow measured with the ADCP was accurate within 4% of the ADV. The turbulent variance was reasonably well resolved by the ADCP when large grid bars were towed at a high speed, but largely overestimated for lower towing speed and smaller grid bars. The effective cutoff frequency and turbulent eddy size were characterized experimentally, which provides detailed guidelines for when the ADCP data can be trusted and will allow future experimentalists to decide a priori if the Nortek Signature can be used in their setup. We conclude that the ADCP is not suitable for resolving turbulent spectra in a small-scale grid-induced flow due to the intrinsic Doppler noise and the low spatial and temporal sample resolution relative to the turbulent scales.

Hydro‐Sedimentary Processes of a Plunging Hyperpycnal River Plume Revealed by Synchronized Remote Imagery and Gridded Current Measurements

AbstractThe present knowledge of plunging hyperpycnal river plumes is mainly based on two‐dimensional (confined) laboratory experiments. Several hypotheses on three‐dimensional (unconfined) flow processes have been made, but not tested in situ. In this field study, the dominant three‐dimensional hydro‐sedimentary processes related to unconfined plunging were elucidated by synchronizing autonomous time‐lapse camera images with boat‐towed acoustic Doppler current profiler measurements. It was found that the flow field complies with two‐dimensional conceptualizations along the plume centerline. Perpendicular to the centerline, the plume slumped laterally due to its density excess and simultaneously converged laterally due to its vertical divergence. This combination led to a narrowing of the plume near the surface, resulting in a sediment‐rich triangle‐shaped pattern on the surface near the inflow, and a rather stable width near the bed. The formation of secondary flow cells transporting riverine water and suspended particulate matter (SPM) away from the plume near the bed, up toward the surface and back toward the plume near the surface, was revealed. An increase of the average SPM concentration and the SPM flux in the main flow direction indicates net sediment erosion under the investigated conditions of high discharge and sediment load. This suggests transient storage of sediment during conditions of lower discharge and sediment load, and high morphological activity in the plunging area. These findings allowed extending a classical conceptual plunging model to laterally unconfined sediment‐laden plunging inflows for conditions of well‐mixed ambient water in the plunging region and inflow densimetric Froude numbers exceeding 1, common in nature.

Assessing the impact of an offshore longline mussel farm on local water circulation in a highly hydrodynamic energetic bay

Thought to be a sustainable choice, molluscs are the most consumed aquaculture foods after finfish. The expansion of the mussel aquaculture industry offshore reports lower environmental impacts compared to inshore farms. Although an offshore location has the potential to reduce a farm's ecological impacts, the effect of large developments on water currents is still not fully understood. High hydrodynamic regimes can influence the dispersion of farm biodeposits, organic loading, flow alterations with the potential to impact water residence time, particle and sediment dispersal (including larvae and biodeposits) and seabed sediment resuspension, which in turn, can have ecological impacts. Farm-induced flow changes of the UK's first large scale suspended longline mussel farm were assessed by a combination of oceanographic mooring and vessel-mounted Acoustic Doppler Current Profiler (ADCP) measurements. Data was separated by upstream and downstream according to the direction of the flow in relation to the farm. M-ADCP results showed a 28% decrease current velocities within the farm's boundaries, demonstrating within-farm current attenuation produced by mussel ropes drag. Flow was then redistributed above and beneath the farm showing velocity increases of 66% and 7% respectively, resulting in above-farm flow acceleration and downwelling (with up to 171% increase in near-seabed velocities compared to sea surface velocities). However, overall mean downstream sea surface velocities decreased by 63%. An overall 21% increase in near-seabed velocities showed the farm's effect on near-bed currents, the opposite to what is naturally achieved by seabed friction. This was further measured by VM-ADCP results also showing secondary flow acceleration at the farm's flanks and increased near-headline flow perturbations of up to 80% mean u velocities over a small horizontal scale (0.5 km), further demonstrating the effects of the farm on the local circulation. Through-farm surface current velocities (waves) were reduced by up to 72%. Flow changes were localised and dependent on the different tidal phases, the farm's design and, the abundance of mussel ropes providing drag.

Utilization of hydrodynamic modelling to quantify water losses from the Sundays River between Darlington Dam and Korhaans Drift Weir

This study quantified transfer losses over the 2021/2022 water year for irrigation releases from Darlington Dam into the Sundays River, which are diverted at the Korhaans Drift Weir. A one-dimensional (1D) hydrodynamic model was set up and calibrated to simulate the transfer losses which were assumed to consist primarily of evaporation and evapotranspiration (ET). Flow measurements were undertaken with an acoustic doppler current profiler (ADCP) to verify the calibrations of the Parshall flumes at Darlington Dam and at Korhaans Drift Weir. The ADCP results showed that the Department of Water and Sanitation’s (DWS’s) existing discharge tables underestimated lower flows by 13% and higher flows by 16%. The hydrodynamic model results also estimated transfer losses between Darlington Dam and Korhaans Drift to range between 2.0% and 5.3%. It was determined that the transfer losses were seasonal and were lower than those determined by similar studies for other South African rivers.

Hydrodynamic modelling to assess habitat suitability of the Ganga River dolphins

AbstractThe Ganga River hosts a metapopulation of endangered aquatic species. This study uses a hydrodynamic model (HEC‐RAS) to assess the habitat suitability of the Ganga River dolphins (GRDs) in a small reach (7.5 km) of the Ganga River at the upstream of Narora barrage in varying flow. We use Lidar points clouds to generate topography, Acoustic Doppler Current Profiler (ADCP), and differential GPS (DGPS) to measure channel bathymetry and streamwise water surface slope. Further, the water level data from satellite altimeter is used to calibrate the model and discharge measured in field to validate the model output. We found that in the high flow period, the required flow depth for dolphin habitat is available throughout in the study reach. However, in the lean flow, the required flow depth and velocity are available only in some patches. The methodology developed here would be very useful in monitoring hydraulic habitat suitability of aquatic species in ungauged rivers.

Characterization of physical properties of a coastal upwelling filament with evidence of enhanced submesoscale activity and transition from balanced to unbalanced motions in the Benguela upwelling region

Abstract. We combine high-resolution in situ data (acoustic Doppler current profiler (ADCP), Scanfish, and surface drifters) and remote sensing to investigate the physical characteristics of a major filament observed in the Benguela upwelling region. The 30–50 km wide and about 400 km long filament persisted for at least 40 d. Mixed-layer depths were less than 40 m in the filament and over 60 m outside of it. Observations of the Rossby number Ro from the various platforms provide the spatial distribution of Ro for different resolutions. Remote sensing focuses on geostrophic motions of the region related to the mesoscale eddies that drive the filament formation and thereby reveals |Ro|<0.1. Ship-based measurements in the surface mixed layer reveal 0.5<|Ro|<1, indicating the presence of unbalanced, ageostrophic motions. Time series of Ro from triplets of surface drifters trapped within the filament confirm these relatively large Ro values and show a high variability along the filament. A scale-dependent analysis of Ro, which relies on the second-order velocity structure function, was applied to the latter drifter group and to another drifter group released in the upwelling zone. The two releases explored the area nearly distinctly and simultaneously and reveal that at small scales (<15 km) Ro values are twice as large in the filament in comparison to its environment with Ro>1 for scales smaller than ∼500 m. This suggests that filaments are hotspots of ageostrophic dynamics, pointing to the presence of a forward energy cascade. The different dynamics indicated by our Ro analysis are confirmed by horizontal kinetic energy wavenumber spectra, which exhibit a power law k−α with α∼5/3 for wavelengths 2π/k smaller than a transition scale of 15 km, supporting significant submesoscale energy at scales smaller than the first baroclinic Rossby radius (Ro1∼30 km). The detected transition scale is smaller than those found in regions with less mesoscale eddy energy, consistent with previous studies. We found evidence for the processes which drive the energy transfer to turbulent scales. Positive Rossby numbers 𝒪(1) associated with cyclonic motion inhibit the occurrence of positive Ertel potential vorticity (EPV) and stabilize the water column. However, where the baroclinic component of EPV dominates, submesoscale instability analysis suggests that mostly gravitational instabilities occur and that symmetric instabilities may be important at the filament edges.

Preliminary Performance Assessment of the Wave Parameter Retrieval Algorithm from the Average Reflected Pulse

To obtain new information about surface waves, it is proposed to use an underwater acoustic wave gauge, and an assessment of its effectiveness can be performed using a numerical simulation and field experiment. A new device, an underwater acoustic wave gauge named “Kalmar”, was developed by the Institute of Applied Physics of the Russian Academy of Sciences for long-term, all-weather monitoring of wind waves. The instrument uses ultrasound to probe the water surface from underwater and can be used to verify remote sensing data. In this work, the capabilities of the device are tested and compared with ADCP data. Two independent methods for processing underwater acoustic wave gauge data are discussed and compared. One of them is completely new for acoustic measurements and is based on the analysis of the shape of the reflected acoustic pulse averaged over space and time. The other allows processing individual reflected pulses and calculating the time implementation of the distance to the water surface. It is shown that two independent methods of significant wave height retrieval from the acoustic wave gauge measurements are highly correlated. The “Kalmar” acoustic wave gauge and the RDI WH-600 acoustic Doppler current profiler operated simultaneously at the test site in Gelendzhik from 1 February to 10 February 2020. The significant wave heights measured by the two instruments are in good agreement.

Measurement of backscattering strength of artificial bubbles in the Southern Sea of the Korean Peninsula

Bubbles greatly affect the propagation of sound waves as the acoustic characteristics of a bubble cluster in water are distinct from those of undisturbed water. Therefore, bubble clusters affect the ability of sensors to detect underwater targets by blocking or reflecting sound waves. Additionally, the bubble wakes produced by ships in movement can be detected by wake-homing torpedoes, thus greatly threatening the safety of the ship. Thus, research on bubble dynamics in water is crucial for the development of military technology. Recently, we conducted a quantitative estimation of the acoustic characteristics of artificial bubbles, including their backscattering strength, existence time, population density spectrum level and void fraction in an ideal water-tank environment. Based on our previous findings, the present study sought to measure the acoustic characteristics of artificial bubbles using an acoustic Doppler current profiler (ADCP) in the southern sea of the Korean Peninsula, which is a real marine environment. Additionally, we validated the ADCP measurements by comparing them to those obtained using a scattering strength measurement system (SSMS) developed by our team. Collectively, our findings provide a basis for the development of military technology, as well as for the study of bubble in water.

Flood Discharge Measurement by STIV Coupled with Maximum Entropy Method Using Parameter Estimation by Numerical Analysis

The coupling of surface velocity measurement by image analysis and the maximum entropy method (MEM) is a non-contact measurement technique to estimate river discharge during flood with high accuracy. The MEM can represent complex vertical velocity distributions including velocity dips, but there is a challenge that the measurement of the cross-sectional velocity distribution by Acoustic Doppler Current Profiler (ADCP), etc. must be required at least once to determine the entropy parameter, which is a specific value at the cross section. This study proposes a new framework for determining the entropy parameter at new measurement sites based on the results of 3-D flow simulations. The framework is applied to two measurement sites, and the cross-sectional velocity distribution and the discharge estimated by the MEM with the entropy parameter are evaluated. The result shows that the framework enables the setting of an appropriate entropy parameter at a given site, and that the discharge estimated using the entropy parameter has a relative error of less than 10% to those measured by the ADCP.

Estimation of Bedform Friction Factor Directly from Bathymetry Data

We present a procedure to systematically estimate the form friction factor through the analysis of spatial data obtained by acoustic Doppler current profiler. The form friction factor is related to the geometric characteristics of the bedform. The zero-crossing method was used to determine the geometric parameters of the bedform, which were then utilized to construct the probability density function for Chezy coefficients. Subsequently, Chezy coefficients were generated from the probability density function and assigned to each grid cell of a numerical model. To evaluate the performance of the presented friction factor estimation method, it was applied to the numerical simulation for the Nakdong River in South Korea. Sensitivity tests were performed to address the potential influence of random extraction from the probability density function, filtering length, and different form predictors during the estimation process. The proposed method showed more robust and accurate results compared to those with Manning's n value.

Morphological Model for Erosion Prediction of India’s Largest Braided River Using MIKE 21C Model

The Brahmaputra River has a dynamic, highly braided channel pattern with frequent river bar formation, making it morphologically very dynamic, especially during the monsoon season with high discharge and sediment load. To understand how the river changes over time, this study focused on two stretches: Palasbari-Gumi and Dibrugarh. Using 2D morphological models (MIKE-21C), the study aimed to predict erosion patterns, plan protective measures, and assess morphological changes over short-term (1 year), medium-term (3 year), and long-term (5 year) periods. Model runs were conducted to predict design variables across these river reaches, encompassing different hydrological scenarios and development-planning scenarios. The coarse sand fraction yielded mean annual sediment load predictions of 257 Mt/year for the 2021 hydrological year and 314 Mt/year under bankfull discharge conditions in the Palasbari-Gumi reach. In the Dibrugarh reach, the corresponding values were 78 Mt/year and 100 Mt/year. Notably, historical records indicate an annual sediment load of 400 Mt/year in the Brahmaputra River. The model results were compared to measurements from Acoustic Doppler Current Profilers (ADCP), showing good accuracy for flow velocities, flood levels, and sediment loads. Discrepancies in peak model velocities compared to ADCP measurements remain consistently below 9% across the majority of recorded data points. The predicted flood levels for the bankfull discharge condition exhibited an outstanding accuracy, reaching nearly 91% at the Palasbari-Gumi site and a notable 95% at the Dibrugarh site. This study has presented a valuable methodology for enhancing the strategic planning and implementation of river training endeavours, particularly within the dynamic and highly braided channels of rivers such as the Brahmaputra River. The approach leverages predictive models to predict morphological changes over a 2–3 years timeframe, contributing to improved river management.

Performance Assessment of a High-Frequency Radar Network for Detecting Surface Currents in the Pearl River Estuary

The performance of a high-frequency (HF) radar network situated within the Pearl River Estuary from 17 July to 13 August 2022 is described via a comparison with seven acoustic Doppler current profilers (ADCPs). The radar network consists of six OSMAR-S100 compact HF radars, with a transmitting frequency of 13–16 MHz and a direction-finding technique. Both the radial currents and vector velocities showed good agreement with the ADCP results (coefficient of determination r2: 0.42–0.78; RMS difference of radials: 11–21.6 cm s−1; bearing offset Δθ: −4.8°–16.1°; complex correlation coefficient γ: 0.62–0.96; and phase angle α: −24.3°–17.8°). For these radars, the Δθ values are not constant but vary with azimuthal angles. The relative positions between the HF radar and ADCPs, as well as factors such as the presence of island terrain obstructing the signal, significantly influence the errors. The results of spectral analysis also demonstrate a high level of consistency and the capability of HF radar to capture diurnal and semidiurnal tidal frequencies. The tidal characteristics and the Empirical Orthogonal Function (EOF) results measured by the HF radars also resemble the ADCPs and align with the characteristics of the estuarine current field.

Performance of moored GPS wave buoys

ABSTRACT Small, lightweight, and easy-to-deploy Global Positioning Satellite (GPS)-based miniature wave buoys (mini-buoys) are increasing in popularity. Most are deployed as Lagrangian drifters, so their utility for engineering applications, requiring a nearshore mooring, has remained in question. We evaluated the performance of five moored mini-buoys off the coast of Duck, North Carolina at Field Research Facility (FRF). We collected 8 months of data over two deployments; first near the FRF’s 8-m array and then near a Datawell Waverider in 17-m depth. We deployed an Acoustic Doppler Current Profiler (ADCP) that measured waves and currents, and compared it to the nearby operational system as a performance benchmark for the mini-buoys. The mini-buoys performed well, with statistics similar to the benchmark for wave frequency spectra and spectral parameters, and they outperformed the benchmark on directional parameters. However, mini-buoy communication was sometimes interrupted by tilting or submersion, which manifested as low-frequency noise or drop-outs. If a mooring was taut, forced by winds or currents and exacerbated by tangled lines or shallower depths, then mini-buoys were more susceptible to communication issues. Overall, these issues were rare; thus, mini-buoys were found to be appropriate for many applications.