Nitrogen Doping Research Articles

Micro/Meso‐Porous Double‐Shell Hollow Carbon Spheres through Spatially Confined Pyrolysis for Supercapacitors and Zinc‐Ion Capacitor

AbstractEnergy storage in supercapacitors and hybrid zinc ion capacitors (ZIC) using porous carbon materials offers a promising alternative method for clean energy solutions. The unique combination of hierarchical porous structure and nitrogen doping in these materials has demonstrated significant capacity for energy storage. Nevertheless, the full potential of these materials, particularly the relationship between pore structure configuration and performance, remains underexplored. Herein, a confined pyrolysis strategy based on the polymerization characteristics of polydopamine (PDA) was developed to construction of hollow carbon spheres with microporous/mesoporous dual shell structure. The depth of micropores and cavity can be controlled by adjusting the duration of heat treatment and hydrothermal treatment, in accordance with the decomposition and polymerization characteristics of PDA. Due to the elasticity of this structure, the relationship between the micro/mesoporous depth of the prepared carbon spheres and the energy storage performance in supercapacitors and ZIC is established. Through optimizing the ion transport capacity of carbon spheres and considering the influence of its internal cavity structure on energy storage, the resulting carbon spheres exhibit high specific capacitance of 389 F g−1 in supercapacitor and specific capacitance of 260 F g−1 and excellent stability with 99.3 % retention after 30000 chare/discharge cycles in ZIC.

Microwave‐assisted control of PtNi nanoalloy clusters on the nitrogen‐doped graphene oxide for energy conversion with oxygen reduction reaction and hydrogen evolution reaction

AbstractResearch on the production and utilization of hydrogen energy is essential to overcome the environmental issues caused by fossil fuels. Herein, we anchor PtNi nanoalloy clusters (Pt‐Ni NACs) on nitrogen‐doped graphene oxide (NrGO) by a facile microwave‐assisted synthesis and analyze the variations of catalyst properties based on the PtNi composition and the presence of nitrogen. Ni inclusion in the Pt matrix can induce lattice strain and change the electronic structure, while the doped nitrogen into the graphene can enhance electron transfer and improve the durability of the catalyst through strong chemical bonding with the alloy clusters. TEM analysis discovers that the NACs are uniformly decorated in a few‐nanometer‐size on the graphene surface, and the formation of the PtNi NACs and structural changes according to composition are confirmed through XRD and XPS. In addition, the structural changes due to N‐doping and its bonding with the NACs are observed through Raman spectroscopy and XPS. Electrochemical measurements reveal that Pt2.6Ni NACs/NrGO exhibits the highest ORR onset potential (0.893 V) and the lowest HER overpotential at 10 mA cm−2 (22 mV) among other catalysts, and those activities are almost unchanged under long‐term durability tests. From these results, Pt2.6Ni NACs/NrGO is utilized in a zinc‐air battery (ZAB) system, demonstrating better battery performance than commercial Pt and Ir‐based catalysts. Moreover, it is applied to hydrogen collection, showing linear trend in hydrogen production over time, confirming the catalyst's availability in hydrogen production and utilization.image

Enhanced photocatalytic performance of magnetically reclaimable N-doped g-C3N4/Fe3O4 nanocomposites for efficient tetracycline degradation

The growing environmental challenge posed by the persistence of tetracycline (TC) antibiotics in natural waters is of increasing concern. To address this, there is an imperative need for advanced methods to mitigate TC residues. Herein, we demonstrate the preparation of nitrogen-doped graphitic carbon nitride integrated with magnetic Fe3O4 (N-g-CN/Fe3O4) composites, showcasing narrow band gaps optimized for TC degradation. These advanced materials, conceived through a thermal poly-condensation approach, utilize citric acid and melamine as precursors for nitrogen and g-CN, respectively. These composites exhibit a face-centered cubic architecture, with particle dimensions between 8 to 12 nm and encompassing both meso and microporous structure. The results of the Brunauer–Emmett–Teller analysis indicated specific surface areas of 6.73 m²/g for g-CN, 69.80 m²/g for N-g-CN, 62.55 m²/g for Fe3O4, and 148.32 m²/g for N-g-CN/Fe3O4. These values demonstrate an increase in surface area upon the incorporation of heteroatom of nitrogen and Fe3O4, into the g-CN matrix, thus influence the photocatalytic performance. Under solar light exposure, the synthesized photocatalysts demonstrated photocatalytic activity with a degradation efficiency of 94.16 % within 120 min. Specifically, the N-g-CN/Fe3O4 (22.5 %) composites exhibited remarkable photocatalytic efficiency due to the narrow band gap energy between N-g-CN and Fe3O4, enhanced light absorption in the visible range, and effective charge carrier separation and transportation to the pollutants. N-g-CN/Fe3O4 (22.5 %) composites demonstrated good recyclability (five cycles), magnetic sustainability, and stability for the degradation of TC and emerging pollutants from wastewater using photocatalysts. Similarly, FGCN composites exhibited good recyclability (five cycles), magnetic retrievability, and stability for degrading organic and emerging pollutants from wastewater through photocatalysis. This efficiency can be attributed to the harmonious combination of nitrogen doping, refined surface area, and the natural heterojunction between N-g-CN and Fe3O4.

Excitation wavelength and time dependent colour tunable room temperature phosphorescence from boron doped carbon nanodots.

Developing metal free room temperature phosphorescence (RTP) materials have received tremendous attention due its potential application in various fields such as sensing, optoelectronics and anticounterfeiting. Herein, we have synthesized an excitation wavelength and time dependent phosphorescent boron doped carbon nanodots (BCNDs) by thermal treatment of ethanolamine and boric acid at 240°C, where boric acid act as both doping and host agents. The obtained BCNDs display blue to orange fluorescence in both aqueous medium and solid state. In addition, the BCNDs display tunable orange-yellow-green phosphorescence in solid state under UV and visible light, lasting upto 10s, visible to naked eye. The boron and nitrogen doping regulates the band gap of the BCNDs, resulting the phosphorescence colour tunability. The average phosphorescence lifetime and quantum yield of BCNDs are found to be 1.27s and 8.61% respectively. Based on the optical properties, the BCNDs are applied as security ink in information encryption and security marking. Hence, this work can promote the development of metal free phosphorescent carbon based materials which may find application in various emerging fields.

N-doping strategy for enhancing the adsorption performance of Ti2CT2 MXene for Sr ion

Radionuclides, such as strontium (Sr), are hazardous radioactive isotopes commonly found in nuclear waste, posing serious environmental and health risks due to their long half-lives and ability to bioaccumulate. Inspired by the electronic modification effect, this study theoretically predicts that doping can significantly enhance the adsorptive performance of MXenes for radionuclides. Specifically, we employed comprehensive first-principles simulations to investigate the impact of nitrogen (N) doping on the adsorption behavior of Ti2CT2 (T = O, F, OH) MXenes for Sr ions, focusing on surface N doping and C-site N doping as effective strategies to improve adsorption. The results confirmed that both types of N doping are beneficial for the adsorption performance of Ti2CT2, and the adsorption strengths of Ti2CT2 with surface N doping are significantly enhanced. This was analyzed and attributed to the ability of N doping to enhance the charge transfer between the Ti2CT2 surface and Sr ions, thus enhancing the adsorption properties. By elucidating the N doping mechanisms, this study is expected to provide theoretical guidance for the design of high-performance MXene materials in radionuclides remediation applications.

HZSM-5 supported with N-doped Fe for microwave catalytic pyrolysis of lignin

Microwave catalytic pyrolysis of lignin is one of emerging technologies for efficiently converting lignin into fuels and chemicals. Molecular sieves (HZSM-5) are widely used as carriers to load metallic components for biomass pyrolysis but often encounter challenges such as high diffusion resistance and insufficient acidity of acidic sites. Traditionally, HZSM-5 is directly modified to enhance the activity of the acidic sites, but this modification is ineffective in improving the metallic components’ activity. Instead, we made nitrogen doping on Fe and then supported on HZSM-5 to construct Fe-N25/HZSM-5 catalysts for microwave catalytic pyrolysis of lignin. The N-doped Fe has the effect of “killing two birds with one stone” on enhancing the catalytic activity. The characterization results indicated that N replaced C of the graphitic carbon network to form carbon nitride structure, and further combined with Fe to generate Fe-N bonds, improving the electronegativity of the metallic component. Besides, the loading of N-doped Fe increased the acidity of the catalyst. The utilization of 1.00Fe-N25/HZSM-5 obtained the greatest bio-gas yield (35.2 wt%), a hydrogen yield of 27.8 mL/min, bio-oil yield (36.4 wt%) and phenol selectivity of 46.2 %. The likely pathway of microwave catalytic pyrolysis on Fe-N25/HZSM-5 was proposed through DFT calculation, using guaiacol as a model compound. The results suggested that N-doped Fe on HZSM-5 8 T tended to break the side-chain methoxy during pyrolysis of guaiacol, with energy barrier of 0.14 eV. This paper provides a promising strategy for modification of microwave pyrolysis catalysts.

Regulating Peripheral Nitrogen Dopants in Single‐Atom Catalysts to Enhance Propane Dehydrogenation

Regulating Peripheral Nitrogen Dopants in Single‐Atom Catalysts to Enhance Propane Dehydrogenation

Regulating Peripheral Nitrogen Dopants in Single-Atom Catalysts to Enhance Propane Dehydrogenation.

For single-atom catalysts (SACs), the dopants situated near the metal site have demonstrated a significant impact on the catalytic properties. However, the effect of dopants situated further away from the metal centers and their working mechanisms remain to be elucidated. Herein, we conduct density functional theory-driven studies on regulating the peripheral nitrogen dopants in graphene-based SACs, with a particular focus on Ir1 SAC, for propane dehydrogenation (PDH). It is found that increasing the distance between the N dopant and the Ir1 site results in a different energy change for the reaction process compared to the dense doping model with only first and second-shell N species. The proposed stochastic doping models demonstrate statistically that increasing the N dopant in farther shells not only enhances the activity of Ir1 but also maintains a high selectivity for propene, which is verified by experimental tests. The modulation of the d-band center of Ir1 by stochastic N dopants effectively modifies the binding strength of reaction intermediates, thereby enabling the optimization of the potential energy surface of PDH. These results deepen the understanding of dopant states around metal sites and provide an important implication for the doping engineering in heterogeneous catalysis.

Sensitive determination of hydroquinone and catechol using an electrochemical sensor based on nitrogen-doped malic acid carbon quantum dots

This study introduces an advanced electrochemical sensor fabricated by immobilizing nitrogen-doped malic acid carbon quantum dots (N-MCQDs) onto a glassy carbon electrode (GCE) via microwave-assisted synthesis and electrodeposition. The N-MCQDs were comprehensively characterized using high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and atomic force microscopy (AFM), confirming their successful synthesis and uniform distribution on the GCE surface. The N-MCQDs-modified GCE electrode (N-MCQDs/GCE) sensor displayed a remarkable linear detection range of 1–500 μM for hydroquinone (HQ) and 1–200 μM for catechol (CC), with ultra-low detection limits of 0.18 μM for HQ and 0.13 μM for CC. It also exhibits commendable stability, interference resistance, and the capability to accurately measure in complex real sample. These superior characteristics were attributed to the enhanced electrical conductivity and increased active sites due to nitrogen doping. This study not only broadens the application spectrum of carbon quantum dots but also offers a novel perspective for the design of high-performance electrochemical sensors for environmental analysis.

Pd Nanoparticles Immobilized on Pyridinic N-Rich Carbon Nanosheets for Promoting Suzuki Cross-Coupling Reactions

Palladium (Pd) catalysts play a crucial role in facilitating Suzuki cross-coupling reactions for the synthesis of valuable organic compounds. However, conventional heterogeneous Pd catalysts often encounter challenges such as leaching and deactivation during reactions, leading to reduced catalytic efficiency. In this study, we employed an innovative intercalation templating strategy to prepare two-dimensional carbon nanosheets with high nitrogen doping derived from petroleum asphalt, which were utilized as a versatile support for immobilizing Pd nanoparticles (Pd/N-CNS) in efficient Suzuki cross-coupling reactions. The results indicate that the anchoring effect of high-pyridinic N species on the two-dimensional carbon nanosheets enhances interactions between Pd and the support, effectively improving both the dispersibility and stability of the Pd nanoparticles. Notably, the Pd/N-CNS catalyst achieved an overall turnover frequency (TOF) of 2390 h−1 for the Suzuki cross-coupling reaction under mild conditions, representing approximately a nine-fold increase in activity compared to commercial Pd/C catalysts. Furthermore, this catalyst maintained an overall TOF of 2294 h−1 even after five reaction cycles, demonstrating excellent stability. Theoretical calculations corroborate these observed enhancements in catalytic performance by attributing them to improved electron transfer from Pd to the support facilitated by abundant pyridinic N species. This work provides valuable insights into feasible strategies for developing efficient catalysts aimed at sustainable production of biaromatic compounds.

Enhancing lithium storage performance of Carbon/SiOx composite via coating edge-nitrogen-enriched carbon

Silicon oxide (SiOx) exhibits promising potential as a lithium-ion battery anode. However, its practical application is impeded by low electrical conductivity and significant volumetric expansion. To overcome these limitations, we developed a novel co-precipitation and selectively etching approach that leveraged the nitrogen-retaining effect of ZnNCN to prepare an edge-nitrogen-enriched carbon/SiOx composite (NEC@LC-SiOx). This NEC@LC-SiOx showed enhanced electrical conductivity and reduced volumetric expansion. Our innovative approach effectively prevented excessive decomposition of nitrogen species, resulting in a high nitrogen doping content of 21.67 at.% while maintaining a stable structure and mitigated volume expansion during charging and discharging. Consequently, the prepared NEC@LC-SiOx exhibited excellent performance as an anode material for lithium-ion batteries, demonstrating a high reversible specific capacity of 802 mAh/g and outstanding rate capability. This work presents a novel strategy for designing high-performance SiOx anode materials.

Enhanced Efficiency of Dye-Sensitized Solar Cells Using Nitrogen-Titanium Dioxide Composites and Optimized Azo Dye Mixtures

In response to the increasing global energy demand, developing cost-effective and reliable renewable energy sources is crucial. Dye-Sensitized Solar Cells (DSSCs) have emerged as a promising alternative due to their low production cost, flexibility, and capability to operate under diffuse sunlight. This study aims to enhance the efficiency of DSSCs by incorporating Nitrogen-Titanium Dioxide (N-TiO2) composites synthesized via the Sol-Gel method [1]. The DSSCs were constructed using N-TiO2 composites in conjunction with VC, RP, and RM azo dyes. Nitrogen in the TiO2 matrix effectively reduced the band gap, leading to improved light absorption. The presence of Nitrogen dopants is expected to introduce additional energy levels within the TiO2 bandgap, enhancing light absorption and charge carrier separation, which are crucial factors for improved DSSC performance [2,3]. The current-voltage (I-V) characteristics of the DSSCs revealed significant variations in key performance metrics, including short circuit current (Isc), fill factor, and power conversion efficiency. Specifically, DSSCs utilizing N-TiO2 with VC-RP dye mixture achieved a higher efficiency of 0.349%, an Isc of 0.85 mA, and a fill factor of 44.59%, with Rs and Rsh values of 328.13Ω and 1637.18Ω, respectively [4]. These results underscore the potential of N-TiO2 composites, particularly when paired with optimized dye mixtures, to significantly enhance the electronic properties and overall efficiency of DSSCs.

Effective Determination of Diosmin Using Nitrogen Doped Carbon Dots as Probe Based on Internal Filtering Effect.

The establishment of a convenient and efficient testing method is crucial and needed for the monitoring of diosmin. In this study, nitrogen doped carbon dots (N-CDs) with the particle size distribution of 2.5-5.7nm and the average diameter of 4.1nm were successfully synthesized using a simple strategy. N-CDs exhibited excellent and stable fluorescence performance with the quantum yield of 22.33%. Correspondingly, a fluorescence analytical method was developed for diosmin determination using N-CDs as probe. UV-vis absorbance spectroscopy and the evaluation of internal filtering parameters verified that the mechanism causing the quenching of N-CDs was an internal filtering effect (IFE). The concentration of diosmin can be directly evaluated based on the quenched fluorescence intensities. After optimizing experimental conditions, it was found that the fluorescence quenching efficiency ((F0-F)/F0) of N-CDs exhibited a good linear relationship with the concentration of diosmin (CDiosmin) in the range of 3.0-50µg/mL. The limit of detection (LOD) was 0.86µg/mL based on 3σ/slope (n = 13). This method was successfully applied to accurately determine the content of diosmin in diosmin tablets and human plasma samples with good reproducibility. It stands out for its simplicity, speed, and acceptable determination performance.

Chemistry of Reduced Graphene Oxide: Implications for the Electrophysical Properties of Segregated Graphene-Polymer Composites.

Conductive polymer composites (CPCs) with nanocarbon fillers are at the high end of modern materials science, advancing current electronic applications. Herein, we establish the interplay between the chemistry and electrophysical properties of reduced graphene oxide (rGO), separately and as a filler for CPCs with the segregated structure conferred by the chemical composition of the initial graphene oxide (GO). A set of experimental methods, namely X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy, van der Paw and temperature-dependent sheet resistance measurements, along with dielectric spectroscopy, are employed to thoroughly examine the derived materials. The alterations in the composition of oxygen groups along with their beneficial effect on nitrogen doping upon GO reduction by hydrazine are tracked with the help of XPS. The slight defectiveness of the graphene network is found to boost the conductivity of the material due to facilitating the impact of the nitrogen lone-pair electrons in charge transport. In turn, a sharp drop in material conductivity is indicated upon further disruption of the π-conjugated network, predominantly governing the charge transport. Particularly, the transition from the Mott variable hopping transport mechanism to the Efros-Shklovsky one is signified. Finally, the impact of rGO chemistry and physics on the electrophysical properties of CPCs with the segregated structure is evaluated. Taken together, our results give a hint at how GO chemistry manifests the properties of rGO and the CPC derived from it, offering compelling opportunities for their practical applications.

An Ultrasensitive and Broad-Spectrum MoS2 Photodetector with Extrinsic Response Using Surrounding Homojunction.

As unique building blocks for advancing optoelectronics, 2D semiconducting transition metal dichalcogenides have garnered significant attention. However, most previously reported MoS2 photodetectors respond only to visible light with limited absorption, resulting in a narrow spectral response and low sensitivity. Here, a surrounding homojunction MoS2 photodetector featuring localized p-type nitrogen plasma doping on the surface of n-type MoS2 while preserving a high-mobility underlying channel for rapid carrier transport is engineered. The establishment of p-n homojunction facilitates the efficient separation of photogenerated carriers, thereby boosting the device's intrinsic detection performance. The resulting photoresponsivity is 6.94×104AW-1 and specific detectivity is 1.21×1014 Jones @ 638nm, with an optimal light on/off ratio of ≈107 at VGS = -27V. Notably, the introduction of additional bands within MoS2 bandgap through nitrogen doping leads to an extrinsic broadband response to short-wave infrared. The device exhibits a photoresponsivity of 34AW-1 and a specific detectivity of up to 5.92×1010 Jones @ 1550nm. Furthermore, the high-performance broadband response is further demonstrated through imaging and integration with waveguides, paving the way for next generation of multifunctional imaging systems and high-performance photonic chips.

Study of the influence of nitrogen doping on magnetic anisotropy in CoFe/MgO thin films with different deposition sequences

Abstract The ferromagnetic (FM)/MgO structure multilayers with perpendicular magnetic anisotropy (PMA) play a crucial role in magnetic random-access memory. It is essential to explore the methods for modulating magnetic anisotropy and to clarify the underlying mechanisms. We study the regulation of the magnetic anisotropy with nitrogen (N) doping concentration (CN) in two samples: Ta/CoFe(N)/MgO/Ta (S1) and Ta/MgO/CoFe(N)/Ta (S2) with different deposition sequences. The S1 sample exhibits in-plane magnetic anisotropy (IMA) without N doping. And the sample presents PMA when CN = 15%. The S2 sample shows weak PMA without N doping, and the sample converts to IMA when CN = 15%. X-ray photoelectron spectroscopy is performed to evaluate the oxidation level of Fe at the CoFe/MgO interface by the peak area ratio of Fe oxide to Fe (ϵ). It is believed that excessively high and low ϵ values correspond to over-oxidation and under-oxidation of Fe, respectively. For films deposited in different sequences, both over-oxidation and under-oxidation lead to IMA, while moderate oxidation facilitates the formation of PMA. The microstructure analysis reveals that the N doping does not affect the crystallization of the films, indicating that magnetocrystalline anisotropy has a minor influence on the changes of K eff.

Boosting HER performance by using plasma prepared N-doped CNTs to support Pt nanoparticles

Developing highly-efficient and stable Pt-based catalysts towards alkaline hydrogen evolution reaction (HER) offers a promising strategy for future renewable energy. In this work, radio-frequency (RF) cold plasma-prepared N-doped MWCNTs were adopted to support Pt nanoparticles (NPs) (Pt/NCNTs) via pretreating MWCNTs with RF nitrogen plasma and combining with traditional thermal reduction method. The as-synthesized Pt/NCNT featured an ultra-small size of Pt NPs (1.5 nm) and plentiful doped nitrogen, exhibiting ultra-low overpotential of 28 mV@10 mA cm−2 and ultra-high mass activity of 3.2 A mg Pt−1@100 mA in 1 M KOH solution, which are superior to those of commercial 20 wt% Pt/C catalyst. This is because RF plasma can realize fast, high-efficient and specific N-doping structure of MWCNTs. The lone electron pairs of N species (mainly pyri-N and pyrr-N) on MWCNTs surface transfer to the empty orbitals of Pt NPs, forming a strong coordination effect between Pt and nitrogen, thereby boosting the alkaline HER catalytic performance.

Nitrogen and Sulfur Doped Porous Carbon Sheet with Trace Amount of Iron as Efficient Polysulfide Conversion Catalyst for High Loading Lithium-Sulfur Batteries.

The major challenges in enhancing the cycle life of lithium-sulfur (Li-S) batteries are the polysulfide (PS) shuttling and sluggish reaction kinetics (S to Li2S, Li2S to S). To alleviate the above issues use of hetero atom doped carbon as cathode host matrix is a low-cost and efficient approach as it works as a dual-functional framework for PS anchoring as well as electrocatalyst for faster redox kinetics. Here, the dual role of the Fe-containing heteroatom-doped carbon sheets (CS) in chemisorption of Li2S6 and catalyzing its faster conversion to Li2S is established through UV-Vis, XPS and CV studies. To substantiate the catalytic effect composite cathodes were prepared by encapsulating sulfur in CS which is further blended with carbon nanotubes (CNTs) to form free-standing cathode. The electrochemical performance of the three cathodes viz., S@Fe-N-CS-CNT, S@Fe-S-CS-CNT and S@Fe-NS-CS-CNT were evaluated by constructing Li-S cells. Among all, the S@Fe-NS-CS-CNT delivers a high initial discharge capacity of 1017 mAh g-1 at 0.5 C rate and sustains 751 mAh g-1 capacity after 260 cycles with a capacity retention of 73.8 %. Even at high S-loading (12 mg cm-2), it delivers an initial discharge capacity of 892 mAh g-1 and it retained 575 mAh g-1 after 200 cycles.

Nitrogen doping of cuprous oxide films: A surface science perspective

Nitrogen doping of Cu2O films grown on Au(111) and Pt(111) supports was explored by a variety of surface-science techniques, including electron-diffraction, X-ray photoelectron-spectroscopy (XPS), scanning tunneling microscopy and photoluminescence spectroscopy (PL). The films were prepared by Cu vapor deposition and high-pressure oxidation at 50 mbar O2. Nitrogen was inserted by adding N2 to the reactive gas or via sputter doping. Only the latter resulted in a clear N1s signal in XPS, compatible with the insertion of N-atoms at O substitutional sites. The N-doping caused an overall degradation of the oxide lattice and suppressed the formation of the (√3×√3)R30° surface reconstruction observed on pristine Cu2O(111). Moreover, the oxide Fermi level shifted from the valence-band top into the band gap, indicative for a reduced p-type conductivity of the sample upon doping. The N-dopants featured low thermal stability and largely desorbed at around 500 K, leaving behind a pronounced 850 nm PL peak due to O vacancy emission. Our findings indicate that the N-atoms initially occupy O substitutional sites but get removed easily at moderate temperature, casting doubts whether N-doping is a suitable pathway to improve the conductance and luminescence behavior of Cu2O.

Nitrogen Doping Engineering of V2CTx based Zinc Ion Hybrid Microcapacitors with Quadruple High Energy Density

To accommodate the long-term and stable energy supply requirements for wearable electronics, the reported flexible zinc ion hybrid microcapacitor (ZIHMC) needs to further increase the energy density. So, a nitrogen doped V2CTx (N-V2CTx) based ZIHMC was proposed to achieve high electrochemical performance. The introduction of N heteroatoms by NH3 annealing can dramatically increase the electrical conductivity of V2CTx and simultaneously widen the voltage window to 1.9 V. In detail, the doped nitrogen atoms in V2CTx based device has a maximum capacity of 293.0 mF cm–2, four times higher than that of pure V2CTx based ZIHMC. The mechanism of the enhanced electrochemical performance by nitrogen doped V2CTx was revealed by the experimental analysis and theoretical simulation. And the N-V2CTx based ZIHMC demonstrated high energy density with 150.0 μWh cm–2 at a power density of 380.0 μW cm–2 and excellent stability with 94.80% capacitance retention after 3000 charge-discharge cycles. The N-V2CTx based ZIHMC also presents excellent flexibility without virtually capacity loss after 3000 bending cycles. The good electrochemical performance and flexibility of N-V2CTx ZIHMC make it has potential applications in flexible wearable electronics.