Sewage Research Articles

COMPARING TWO SEAWATER TEMPERATURES FOR HUMAN NOROVIRUS DEPURATION FROM OYSTERS.

Despite regulations set up to monitor the microbiological quality of shellfish in producing areas, shellfish-borne gastroenteritis outbreaks still occur. Indeed, oyster depuration practices that are efficient to eliminate bacteria, fail to eliminate human norovirus from oyster flesh. In order to evaluate the impact of seawater temperature on the elimination of norovirus particles from oysters, large batches of oysters were contaminated using raw sewage containing norovirus and subjected to depuration at 8°C or 18°C. Over the experiment, quantitative RT-qPCR showed a one-log decrease of norovirus (both genogroups combined) genome copies per gram of digestive tissue after 41 days for oysters depurated at 8°C and 24 days at 18°C. The decrease of norovirus (both genogroups combined) in two batches of field-contaminated oysters depurated for two weeks at 18°C was in the same range (21 and 23 days respectively). All experiments showed a difference in genomic decay between the two norovirus genogroups, with norovirus genogroup I being more persistent in March/April compared to April/May.

Temporal and Spatial Dynamics of Carbon, Nitrogen, and Phosphorus in a Subtropical Urban River (Tamanduateí River, São Paulo, Brazil)

Water quality in urban streams often reflects the broader environmental challenges posed by dense population centers, where pollution from untreated sewage and runoff can significantly degrade ecosystems. This study examines the spatial and temporal variations of carbon, nitrogen, and phosphorus concentrations in the Tamanduateí River, which runs through the Metropolitan Region of São Paulo, Brazil. Data were sourced from the annual reports of the Environmental Company of the State of São Paulo (CETESB) covering the period from 2011 to 2022. Between 2011 and 2017, carbon and phosphorus concentrations declined, likely due to sanitation improvements. However, since 2017, these concentrations have been rising again, indicating renewed pollution inputs, primarily from untreated sewage. Nitrogen levels remained consistently high, with elevated concentrations observed upstream, linked especially to domestic effluent discharges. The recent increase in phosphorus levels is also of concern. The absence of spatial variation in phosphorus suggests diffuse pollution from urban areas, while nitrogen decreases downstream, possibly due to biological assimilation. The study underscores the pressing need for enhanced sewage management. Drawing from the successful revitalization of the Cheonggyecheon stream in Seoul, implementing nature-based solutions and regular maintenance could effectively reduce nutrient pollution and improve water quality, facilitating the restoration of the Tamanduateí River.

How Can Restoration Improve the Environmental Conditions of a Meromictic Urban Lake?

This study was conducted on Klasztorne Małe Lake located in the city of Kartuzy. For about 100 years, the lake served as a receiver of domestic, industrial, and rain sewage. The lake was completely degraded. In addition, excessive sewage inflow caused the accumulation of dense pollution in the area of the lake’s deepest part, which caused the formation of a monimolimnion layer. The bradymictic KML became a meromictic lake. After cutting off the inflow of pollutants, the lake was restored by the P inactivation method using coagulants PIX 111 and PAX 18. Before the restoration process of this lake, concentrations of nutrients in the bottom water layers achieved very high values of TN (total N) 65 mg/L and TP (total P) 30 mg/L. An average concentration of chlorophyll was 65 µg/L and visibility did not exceed 1 m. The method used brought very good results. In the entire volume of water, over 90% reduction in TP and a several-fold decrease in the content of TN were noted. The withdrawal of mineral P from the water limited the production processes in the lake, which was reflected in the reduction in chlorophyll amounts (19 µg/L) and the increase in water visibility (2 m). In addition, oxygen conditions in the lake improved. The application of coagulants caused a decrease in the density of the monimolimnion water, which was indicated by a significant decrease in water conductivity. However, the restoration method did not improve the water dynamics.

Source apportionment of organic carbon and black carbon in the surface sediments of the Pearl River Estuary and its adjacent South China Sea: insight from stable carbon and nitrogen isotopes

Coastal estuaries and adjacent continental shelf seas constitute vital global carbon reservoirs, and the sources and transformations of organic carbon in these regions are crucial to global biogeochemical cycles and climate change. This study investigated the total organic carbon (TOC), total nitrogen (TN), black carbon (BC), and their stable carbon and nitrogen isotopes (δ15NTN, δ13CTOC, δ13CBC) in the surface sediments of the Pearl River Estuary (PRE) and its adjacent northern South China Sea (NSCS) aiming to assess the impact of human activities on organic carbon dynamics in these areas. Results showed that the highest TOC concentrations occurred in the inner PRE due to intense human activities, and decreased seaward. The west side of the PRE exhibited higher TOC levels than the east side, which was attributed to differences in hydrodynamic processes and human activities. The westward flow of the Pearl River diluted water, which carried terrestrial organic matter inputs due to the influence of the Coriolis effect and intense local human activities, was a primary contributor to higher TOC levels on the west side (terrestrial source). In contrast, increased productivity and intensive mariculture activities on the east side predominated as sources of organic matter (marine source). Similar to the TOC, BC and TN sources were mainly influenced by human activities. δ15NTN distribution shows that TN in the east side of PRE mainly originated from industrial wastewater input from the Pearl River, while in the east side TN was mainly from domestic sewage discharge. Additionally, BC sources have shifted from primarily biomass combustion in the 1990s to fossil fuel emissions presently. Isotopic analysis revealed that over 70% of BC originated from fossil fuel inputs and C3 plant combustion, highlighting the significant influence of human activities in the PRE and adjacent NSCS, and underscoring the need for effective management and protection of the eco-environment in these regions.

Greenhouse gas emissions from urban river waters of China's major cities

Urban rivers are emerging as potent emitters of greenhouse gases (GHGs). However, the magnitude and drivers of GHG emissions from urban rivers are not well understood at a national level. Using a quantitative synthesis of 4633 data records collected from urban river waters of 23 major Chinese cities, this study delved into a systematic analysis of GHG emissions from urban rivers across China. The study showed that GHG emissions in these urban rivers varied spatially and temporally, with the highest carbon emission (CO2 + CH4) from the rivers draining large metropolitan areas and during the summertime. CO2, CH4, and N2O concentrations in the urban river waters ranged from 22.53 to 1052.20 (188.41 ± 223.10) μmolL−1, 0.02 to 21.32 (1.35 ± 1.59) μmolL−1, and 0.01 to 16.81 (0.21 ± 0.72) μmolL−1, respectively, with an average flux of 148.98 ± 245.30 mmolm−2d−1 for CO2, 9.41 ± 25.08 mmolm−2d−1 for CH4, and 0.19 ± 0.65 mmolm−2d−1 for N2O. Urban rivers also received large domestic sewage with high nutrient and carbon loadings due to huge populations, indicating the effect of wastewater treatment plant effluent and urban runoff on GHG production. These findings imply that direct GHG contributions from rivers in urban areas should be accurately quantified and consequently be included in GHG inventories of riverine GHG emissions.

Examining the Potential of Biogas: A Pathway from Post-Fermented Waste into Energy in a Wastewater Treatment Plant

Biogas has improved due to technological advancements, environmental awareness, policy support, and research innovation, making it a more cost-effective and environmentally friendly renewable energy source. The Generalized Linear Model (GLM) was employed to examine the relationship between purchased and generated energy from 2007 to 2023. Metrics such as deviance, log likelihood, and dispersion phi were examined to assess model fit. The Mann–Kendall test was utilized to detect trends in energy datasets. Biochemical Oxygen Demand (BOD5) and Chemical Oxygen Demand (COD) reduction was significant, exceeding 97% from 2014 to 2023. However, treated sewage displayed limited susceptibility to biological degradation, with COD to BOD5 ratios increasing from 2.28 to 6.59 for raw sewage and from 2.33 to 7.05 for treated sewage by 2023. Additionally, the efficiency of sewage purification processes was calculated, and multivariate regression analysis was conducted on gas composition data. Principal Coordinate Ordination (PCO) and k-means clustering were used for dimensionality reduction and biogas component clustering, respectively. This research showed that biogas from the waste water treatment process can be used, particularly in methane production. Technological advancements have made biogas production more efficient, enhancing energy generation within a circular economy framework.

Evaluation of the effect of disposal of landfill leachate in a sewage treatment plant composed of stabilization ponds

This study aimed to evaluate the combined treatment system of domestic sewage and leachate by serial stabilization ponds in a Wastewater Treatment Plant (WWTP). The WWTP had two parallel pond modules, one receiving (module II—pond M10) and the other not receiving leachate (module I—pond M5). Physical, chemical, and biological monitoring parameters collected from January 2017 to December 2021 were evaluated. High reducing efficiency for ammonium nitrogen was found, with an average of 95.7 ± 2.5%. BOD5 and COD can be considered statistically different for a 95% confidence level in the two pond modules. The phytoplankton community was composed of 46 taxa distributed in four taxonomic classes: 6 belonging to the Cyanobacteria group (13%), 22 to the Green Algae group (48%), 4 to the Diatoms group (9%), and 14 to the Phytoflagellate group (30%). No ecotoxicity was detected for the evaluated pond effluent samples. Thus, although the insertion of leachate impacted the quality of the final effluent of the ponds and the organic matter, it may not have affected the effluents’ ecotoxicity. This research helps to understand the impacts of long-term leachate insertion in a real treatment system using stabilization ponds for combined treatment. In addition to the usual efficiency evaluation parameters, ecotoxicological tests and phytoplankton are also evaluated.

Electrocoagulation as a Remedial Approach for Phosphorus Removal from Onsite Wastewater: A Review

Onsite wastewater treatment systems (OWTSs), although essential for managing domestic sewage in areas without centralized sewerage treatment plants, often release phosphorus (P) into the environment due to inadequate treatment. This unregulated P discharge exacerbates water quality degradation and jeopardizes aquatic habitats and human health. Among different treatment technologies, electrocoagulation (EC) demonstrates considerable potential for addressing this challenge by efficiently removing P from OWTSs and thus protecting water resources and ecological integrity. Through electrochemical reactions, EC destabilizes and aggregates P-bearing particles, facilitating their removal through precipitation. Compared to conventional treatment approaches, i.e., chemical and biological methods, EC offers several advantages, including high efficiency, minimal chemical usage, and adaptability to varying wastewater compositions. This review underscores the urgent need for mitigating P discharge from OWTSs and the efficacy of EC as a sustainable solution for P removal, offering insights into its mechanisms, reactor design considerations, important operational factors, performance, and potential applications in OWTSs as well as providing future research directions.

Study on Operation Effect of Two-Stage MSL System for Rural Decentralized Sewage Treatment

To improve the removal efficiency of rural domestic sewage, a two-stage multi-soil-layer sewage treatment system with an “aeration section + non-aeration section” was designed, and its treatment performance was observed under different influent loads and aeration intensities. The experiment ran for a total of 150 days, and the results showed that the two-stage multi-soil-layer (MSL) system could effectively reduce the effluent concentration of sewage to meet discharge standards. Under the operating conditions of an influent hydraulic load of 1000 L·m−2·d−1 and an air–water ratio of 4:1, the final effluent average concentrations of COD, NH3-N, TN, and TP were 106.5 mg·L−1, 7.4 mg·L−1, 13.9 mg·L−1, 0.12 mg·L−1, and 18.6 mg·L−1, respectively, with average removal rates of 85.3%, 82%, 72.5%, 96%, and 85%. A longer hydraulic retention time and ideal anoxic conditions were ensured by designing a certain effluent height in the system. Adding aeration to the system allowed for a synchronous nitrification–denitrification reaction under reasonable influent loads, ultimately enabling the effluent to meet discharge standards.

Heating and ultraviolet irradiation: Gas pressure meter-based analytical system for on-site and rapid monitoring of permanganate index (CODMn)

Permanganate index (CODMn) is one of the important indicators of surface water quality measurement. Herein, a portable analytical system was developed for on-site and rapid analysis of CODMn, organic substances in water were oxidized and transformed into gases, so that CODMn concentration was converted into a change of gas pressure signal, the pressure signal change was further detected by a gas pressure meter. Heating method and ultraviolet (UV) irradiation method were used as assisting technologies for oxidization of organic substances by acidic KMnO4, a linear range of 2–150 mg l-1 and a detectable limit of 2 mg l-1 were obtained. Those methods were further applied to the detection of CODMn in various water samples (lake waters and domestic sewage) and certified reference water samples (BWZ 6974–2016C and BWZ 7617–2016), with recoveries of 89–111 %. Among them, a portable analytical system based on UV irradiation gas pressure meter was further established and used for the analysis of CODMn in field. It is a promising analytical system/device for CODMn monitoring in field, offering advantages of low-cost, easy-operation, portability and rapidness.

In situRaman investigation to electrochemical synthesis of ammonia on Pd nanocrystals.

Nitrate and nitrite are widely present in industrial wastewater and domestic sewage, so electrocatalytic reduction of both nitrate and nitrite to ammonia synthesis is considered to be a sustainable development approach. Pd nanostructures have attracted much attention because of their high activity in catalyzing the nitrate electrochemical reduction reaction. Here we prepare Pd nanocube and octahedron for the electrochemical reduction of nitrate and nitrite. It is found that Pd octahedron shows slightly higher activity toward nitrate reduction than Pd nanocube, while for nitrite reduction, Pd octahedron shows much higher activity than Pd nanocube. The ammonia yield rate is more potential-dependent.In situRaman characterization further confirms the existence of adsorbed ammonia on the surface of nanocube and octahedron, indicating similar reduction pathways on (111)-facet octahedron and (100)-facet nanocube.

Shallow Groundwater Quality Assessment and Pollution Source Apportionment: Case Study in Wujiang District, Suzhou City

Groundwater serves as a crucial resource, with its quality significantly impacted by both natural and human-induced factors. In the highly industrialized and urbanized Yangtze River Delta region, the sources of pollutants in shallow groundwater are more complex, making the identification of groundwater pollution sources a challenging task. In this study, 117 wells in Wujiang District of Suzhou City were sampled, and 16 groundwater quality parameters were analyzed. The fuzzy synthetic evaluation method was used to assess the current status of groundwater pollution in the study area; the principal component analysis (PCA) was employed to discern the anthropogenic and natural variables that influence the quality of shallow groundwater; and the absolute principal component scores–multiple linear regression (APCS-MLR) model was applied to quantify the contributions of various origins toward the selected groundwater quality parameters. The results indicate that the main exceeding indicators of groundwater in Wujiang District are I (28%), NH4-N (18%), and Mn (14%); overall, the groundwater quality is relatively good in the region, with localized heavy pollution: class IV and class V water are mainly concentrated in the southwest of Lili Town, the north of Songling Town, and the south of Qidu Town. Through PCA, five factors contributing to the hydrochemical characteristics of groundwater in Wujiang District were identified: water–rock interaction, surface water–groundwater interaction, sewage discharge from the textile industry, urban domestic sewage discharge, and agricultural non-point source pollution. Additionally, the APCS-MLR model determined that the contributions of the three main pollution sources to groundwater contamination are in the following order: sewage discharge from the textile industry (10.63%) > urban domestic sewage discharge (8.69%) > agricultural non-point source pollution (6.26%).

Application of organic silicon quaternary ammonium salt (QSA) to reduce carbon footprint of sewers: Long-term inhibition on sulfidogenesis and methanogenesis

Sulfidogenic and methanogenic processes are undesirable in sewer management, yet the derived problems regarding organic losses are often neglected. Traditional chemical dosing methods aimed at sulfide and methane control commonly involve similar mechanisms of oxidation and/or precipitation. Moreover, previous focuses were centered on elevating control efficacy rather than investigating interactions between dosed chemicals and biofilms. In this work, organic silicon quaternary ammonium salt (QSA) of 75 mg-N/L was firstly applied in laboratory pressurized sewer reactors. After three dosing events, it took 20 days for sulfidogenic activities to recover to 50 % without further elevations. Meantime, methanogenic activities were stable ca. 11 % without significant inclinations to recover. Notably, consumption rate of chemical oxygen demand (COD) was suppressed to 50 % at most, and no microbial resistance to QSA but better control efficacy was observed. Characterizations of physicochemistry, microbial community and metabolism were conducted to elucidate mechanisms. Results showed that QSA was attached on sewer biofilms via electrostatic attraction to exert enduring control efficacy. Biofilms tended to become more hydrophobic and compact after QSA exposure. Microbial analyses indicated that relative abundances of microbes regarding hydrolysis, acidogenesis and methanogenesis were sharply decreased together with down-regulation of pivotal enzymatic activities. Additionally, denitrification batch tests initially suggested that the biodegradability of effluent was significantly enhanced, which ensured the safety of QSA dosing into sewers. Overall, results of this work were expected to lay a theoretical foundation on employing QSA to wastewater management.

Preparation of a novel organic-inorganic composite sludge bioflocculant (SBF) from dewatered sludge as raw material: Characteristics, flocculation mechanism and application for domestic sewage

In this work, a green sludge bioflocculant (SBF) was prepared via chemical hydrolysis of dewatered sludge and applied to flocculation of domestic wastewater. The process parameters for the preparation of the SBF were 1.80 % hydrochloric acid concentration, 60 min extraction time, and 4000 r/min centrifugation speed. SBF is polymeric flocculant composed of organic and inorganic compounds. Flocculation efficiency reached 97.31 ± 0.26 % under optimal flocculation conditions. Charge neutralization promotes the surface adsorption, bridging and net trapping and sweeping of Fe (OH)3, Al (OH)3 and active functional groups OH/NH and C = O in SBF, which together achieve efficient flocculation reactions. SBF had high efficiency and stable flocculation performance for phosphorus in urban domestic wastewater, and the concentration of TP in effluent was lower than 0.30 mg/L. Therefore, SBF prepared from dewatered sludge has efficient flocculation properties and is suitable for removing pollutant phosphorus, which has good application prospects in the field of wastewater treatment.

Sanitary sewer overflows, household sewage backups, and antibiotic-resistant bacteria: the new frontier of environmental health risks and disasters

Abstract Untreated sewage discharges leading to environmental contamination are increasingly common in communities across the globe. The cause of these discharges range from sewer lines in disrepair, blockages, and in the era of more extreme wet weather events, the infiltration of stormwater into the system during heavy downpours. Regardless of the driver of these events, the aftermath results in raw sewage spilling into local waterways, city streets, and commercial and residential structures. Historical research in public health has thoroughly documented the connection between exposure to untreated sewage and waterborne disease. Recent research has detected antibiotic-resistant bacteria at wastewater treatment facilities at a time when deaths by antibiotic-resistant infections are on the rise. However, no research has explored the exposure pathways of antibiotic resistant bacteria during sanitary sewer overflows and household-level sewage backups. In this commentary, we aim to introduce this new frontier of environmental health risks and disasters. To do this we describe the history of modern sanitation and sewer infrastructure with a particular focus on wastewater infrastructure in the U.S. We also explore emerging risks and current methods for identifying antibiotic-resistant bacteria in the environment. We end with future directions for interdisciplinary scholarship at the nexus of urban planning, engineering, and public health by introducing the Water Emergency Team (WET) Project. WET is a community-based multi-method effort to identify environmental risks in the aftermath of household backups through 1) residential surveys, 2) indoor visual inspections, 3) environmental sampling, and 4) laboratory processing and reporting. Our hope is that by introducing this comprehensive approach to environmental risks analysis, other scholars will join us in this effort and ultimately towards addressing this grand challenge of our time.

Novel hydrogen-bonded organic frameworks-based coating for fat oil and grease deposition control in the sewer system

Hydrogen-bonded organic frameworks (HOFs) represent an emerging class of porous materials characterized by crystalline frame structures, self-assembled from organic molecules through hydrogen bonding. This study demonstrates that HOFs fragment into small particles while preserving their original structure when dispersed in a polymeric epoxy solution. The intermolecular hydrogen bond structural and electronic properties of the LH4-HOF complex as well as the mechanism of HOF incorporated epoxy were extensively studied using density functional theory. LH4-HOF has a high Langmuir surface area of 2758.3 m2/g and nonlocal density functional theory pore size distributions of 3 A°. This unique solution processability enables the fabrication of coatings with high stability in aqueous systems. Results from a 30-day leaching test under controlled conditions (pH 7, temperature 20 ± 2 °C) indicate that LH4-HOF incorporated epoxy-coated concrete samples exhibited an over 85 % reduction in calcium release compared to uncoated samples, with epoxy-coated samples alone showing a 60 % reduction in calcium leaching. Additionally, the LH4-HOF-incorporated epoxy coating reduced the formation of fats, oils and grease deposits by more than 73 % on the concrete samples. Thus, this novel coating approach offers a sustainable solution with significant potential applications in sewer management.

Spatiotemporal Variation Characteristics and Source Identification of Nitrogen in the Baiyangdian Lake Water, China

To study the characteristics and sources of nitrogen in the Baiyangdian Lake, this research conducted water quality monitoring during three hydrological periods (normal period, flood period, and dry period), and 165 pieces of routine water quality monitoring data were collected from the three national control sections for Baiyangdian Lake and its inflow rivers. By integrating water chemical analysis with multivariate statistical techniques, the study comprehensively investigated the spatiotemporal variation patterns of nitrogen in Baiyangdian Lake and identified the sources of nitrogen pollution. The results showed that the concentration of total nitrogen (TN) was highest during the dry period, reaching an average of 0.924 mg/L, and 31.3% of the sites exceeded the national Grade III surface water quality standard, reflecting a potential risk of nitrogen pollution. Based on the ion ratio method and principal component analysis (PCA), the main sources of nitrogen pollution in Baiyangdian Lake were identified as manure and domestic sewage, with agricultural fertilizers also having a certain impact on water nitrogen pollution. In addition, the study also compared the nitrogen concentration in Baiyangdian Lake with several important lakes in China. The results showed that the concentrations of TN and ammonium nitrogen (NH4+-N) in Baiyangdian Lake are lower than those in lakes in areas with similar human activity intensity, indicating that the water quality of Baiyangdian is relatively good. This study can provide a scientific basis for water quality management and pollution prevention for Baiyangdian Lake.

Source apportionment and influencing factors of surface water pollution through a combination of multiple receptor models and geodetector

In line with sustainable development goals (SDGs), precise quantification of water pollution and analysis of environmental interactions are crucial for effectively safeguarding water resources. In this study, Nemerow's pollution index was used to evaluate water quality, three receptor models were used to identify pollution sources, and Geodetector analysis was applied to explore environmental interactions in the North Shangyu Plain, Southeast China. Using 5207 surface water samples from September 2023 with 11 physicochemical parameters, the results showed that surface rivers in the North Shangyu Plain exhibited varying degrees of pollution: slight pollution upstream, moderate pollution in midstream and downstream, and concentrated high pollution in certain areas, with TN, CODCr, and TP as the primary pollutants. Multimethod source apportionment significantly improved the accuracy of pollution source attribution and identified five main sources: domestic sewage (1.42%–3.54%) characterized by NO3-N, phytoplankton source (38.43%–50.05%) indicated by chl and PC, agricultural cultivation (16.1%–17.63%) marked by TP and CODMn, industrial wastewater (17.64%–25.1%) primarily associated with TN, and natural source (10.32%–13.26%) characterized by DO, NH3-N, and CODCr. Influencing factor analysis validated the source identification. Natural factors had minor impacts on water parameters, while pollution control from agricultural activities was suggested to diversify fertilizer types rather than merely reduce quantities. The combined effects of industrial and aquaculture activities intensified pollution from TN, chl, and PC, underscoring the need for targeted management practices. This study showed the objectivity and reliability of using a combined approach of multiple receptor models and Geodetector to evaluate the river water quality status, which helps assist decision-makers in formulating more effective water resource protection strategies.

Hydrochemical variation characteristics and driving factors of surface water in arid Areas—a case study of Beichuan River in Northwest China

Examining the chemical properties of river water and the controlling factors is crucial for devising efficacious strategies in water resources management and ecological conservation. This study investigates the hydrochemical characteristics and driving factors of the Beichuan River in the arid region of Northwest China. Surface water samples were collected during wet and dry seasons, and analyzed using hydrochemical diagrams, mathematical statistics, and principal component analysis (PCA). The results show that the pH value of Beichuan River is generally weakly alkaline, the main hydrochemical types are HCO3-Ca, and the average TDS are 224 mg/L and 236 mg/L respectively, which are higher than the world average level (115 mg/L). The seasonal variation of hydrochemical components is mainly controlled by rainfall, showing that the concentrations of Na+, Cl− and NO3− in the wet season are higher than those in the dry season, while the concentrations of other chemical components show an opposite trend, while the spatial variation is mainly controlled by human activities, and the concentrations of hydrochemical components show a gradual increasing trend from upstream to downstream, especially Na+, Mg2+, Cl− and NO3−. Rock weathering is the key natural factor controlling the Hydrochemical Composition of Beichuan River. Na+ and Cl− are mainly from the dissolution of silicate, Ca2+ and Mg2+ are mainly from the weathering of carbonate rocks and silicate, and SO42- is mainly from the dissolution of evaporite. It is noted that human activities, especially domestic sewage and agricultural runoff, contribute significantly to NO3− in the water body. PCA identified rock weathering and agricultural runoff as major wet-season factors, while domestic sewage predominantly affects the dry season. This study can provide a scientific basis for the rational development of water resources and ecological environment protection in arid areas.

Source apportionment and ecological risk assessment of antibiotics in Dafeng River Basin using PMF and Monte-Carlo simulation.

Antibiotics, prevalent in aquatic ecosystems, pose a grave threat to human health and the ecological well-being. This paper performed a case study on Dafeng River Basin in southern China. Specifically, techniques including positive matrix factorization (PFM) and Monte-Carlo simulation were employed to comprehensively investigate the spatial variations, possible sources, and ecological risks of antibiotics in four groups: sulfonamides (SAs), macrolides (MLs), quinolones (QNs), and tetracyclines (TCs). The major findings were as follows: first, 43 and 39 antibiotics were detected in the surface water and sediments of the basin, respectively, where the respective total content were ND-490.08ng/L and ND-144.34μg/kg, and the QNs and TCs were the two dominating groups. Second, the highest antibiotic content in surface water (441.43ng/L) was observed in the midstream area, whereas the highest concentration in sediments (68.41μg/kg) was found in the upstream region. Third, the investigation identified five sources of antibiotics discharged to surface water: domestic sewage, agricultural drainage, livestock discharge, sewage treatment plants, and aquaculture; three sources were detected for antibiotics in sediments: aquaculture, sewage treatment plants, and livestock discharge. Fourth, QNs had a significantly higher ecological risk than the other three groups of antibiotics, and livestock discharge (31.4% contribution) and aquaculture (23.4% contribution) were the main sources of risks of antibiotic contamination in Dafeng River Basin. This study is expected to provide some reference for control and risk management of antibiotic pollution in Dafeng River Basin.