DNA Probes Research Articles

Amplification-free quantitative detection of genomic DNA using lateral flow strips for milk authentication

With the globalization and complexity of the food supply chain, the market is becoming increasingly competitive and food fraudulent activities are intensifying. The current state of food detection faced two primary challenges. Firstly, existing testing methods were predominantly laboratory-based, requiring complex procedures and precision instruments. Secondly, there was a lack of accurate and efficient quantitative detection methods. Taking cow's milk as an example, this study introduced a novel method for nucleic acid quantification in dairy products, based on lateral flow strips (LFS). The core idea of this method is to design single-stranded DNA (ssDNA) probes to hybridize with mitochondrial genes, which are abundant, stable, and species-specific in dairy products, as detection targets. Drawing inspiration from the principles of nucleic acid amplification, this research innovatively established a new DNA hybridization method, named LAMP-Like Hybridization (HybLAMP-Like). Leveraging the denaturation and DNA polymerization functions of the bst enzyme, efficient binding of the probe and template strand was achieved. This method eliminated the need for nucleic acid amplification, simplifying the procedure and mitigating aerosol contamination, thereby ensuring the accuracy of the detection results. The method exhibited exceptional sensitivity, capable of detecting extremely low to 12.5 ng in visual inspection and 3.125 ng when using a reader. In terms of practicality, it could achieve visual detection of cow's milk content as low as 1% in adulterated dairy products. When combined with a portable LFS reader, it also enabled precise quantitative analysis of milk adulteration.

Bringing to Light the Importance of the miRNA Methylome in Colorectal Cancer Prognosis Through Electrochemical Bioplatforms.

This work reports the first electrochemical bioplatforms developed for the determination of the total contents of either target miRNA or methylated target miRNA. The bioplatforms are based on the hybridization of the target miRNA with a synthetic biotinylated DNA probe, the capture of the formed DNA/miRNA heterohybrids on the surface of magnetic microcarriers, and their recognition with an antibody selective to these heterohybrids or to the N6-methyladenosine (m6A) epimark. The determination of the total or methylated target miRNA was accomplished by labeling such secondary antibodies with the horseradish peroxidase (HRP) enzyme. In both cases, amperometric transduction was performed on the surface of disposable electrodes after capturing the resulting HRP-tagged magnetic bioconjugates. Because of their increasing relevance in colorectal cancer (CRC) diagnosis and prognosis, miRNA let-7a and m6A methylation were selected. The proposed electrochemical bioplatforms showed attractive analytical and operational characteristics for the determination of the total and m6A-methylated target miRNA in less than 75 min. These bioplatforms, innovative in design and application, were applied to the analysis of total RNA samples extracted from cultured cancer cells with different metastatic profiles and from paired healthy and tumor tissues of patients diagnosed with CRC at different stages. The obtained results demonstrated, for the first time using electrochemical platforms, the potential of interrogating the target miRNA methylation level to discriminate the metastatic capacities of cancer cells and to identify tumor tissues and, in a pioneering way, the potential of the m6A methylation in miRNA let-7a to serve as a prognostic biomarker for CRC.

Understanding the chromosomal evolution in cuckoos (Aves, Cuculiformes): a journey through unusual rearrangements.

The Cuculiformes are a family of over 150 species that live in a range of habitats, such as forests, savannas, and deserts. Here, bacterial artificial chromosome (BAC) probes (75 from chicken and 14 from zebra finch macrochromosomes 1-10 +ZW and for microchromosomes 11-28 (except 16)) were used to investigate chromosome homologies between chicken and the squirrel cuckoo (Piaya cayana). In addition, repetitive DNA probes were applied to characterize the chromosome organization and to explore the role of these sequences in the karyotype evolution of P. cayana. We also applied BAC probes for chicken chromosome 17 and Z to the guira cuckoo (Guira guira) to test whether this species has an unusual Robertsonian translocation between a microchromosome and the Z chromosome, recently described in the smooth-billed ani (Crotophaga ani). Our results revealed extensive chromosome reorganization with inter- and intrachromosomal rearrangements in P. cayana, including a conspicuous chromosome size and heterochromatin polymorphism on chromosome pair 20. Furthermore, we confirmed that the Z-autosome Robertsonian translocation found in C. ani is also found in G. guira, not P. cayana. These findings suggest that this translocation occurred prior to the divergence between C. ani and G. guira, but after the divergence with P. cayana.

Click Conjugation of Zwitterionic Peptide with DNA Strand: An Efficient Antifouling Strategy for Versatile Photoelectrochemical Aptasensor.

Advanced antifouling biosensors have garnered considerable attention for their potential for precise and sensitive analysis in complex human bodily fluids. Herein, a pioneering approach was utilized to establish a robust and versatile photoelectrochemical aptasensor by conjugating a zwitterionic peptide with a DNA strand. Specifically, the branched zwitterionic peptide (BZP) was efficiently linked to complementary DNA (cDNA) through a click reaction, forming the BZP-cDNA conjugate. This intriguing conjugate exploited the BZP domain to create an antifouling biointerface, while the cDNA component facilitated subsequent hybridization with probe DNA (pDNA). To advance the development of the aptasensor, an upgraded PDA/HOF-101/ZnO ternary photoelectrode was designed as the signal converter for the modification of the BZP-cDNA conjugate, while a bipyridinium (MCEPy) molecule with strong electron-withdrawing properties was labeled at the front end of the pDNA to form the pDNA-MCEPy signal probe. Targeting the model of mucin-1, a remarkable enhancement in the photocurrent signal was achieved through exonuclease-I-aided target recycling. Such an engineered zwitterionic peptide-DNA conjugate surpasses the limitations imposed by conventional peptide-based sensing modes, exhibiting unique advantages such as versatility in design and capability for signal amplification.

Electrochemical detection of miRNA using commercial and hand-made screen-printed electrodes: liquid biopsy for cancer management as case of study.

The growth of liquid biopsy, i. e., the possibility of obtaining health information by analysing circulating species (nucleic acids, cells, proteins, and vesicles) in peripheric biofluids, is pushing the field of sensors and biosensors beyond the limit to provide decentralised solutions for nonspecialists. In particular, among all the circulating species that can be adopted in managing cancer evolution, both for diagnostic and prognostic applications, microRNAs have been highly studied and detected. The development of electrochemical devices is particularly relevant for liquid biopsy purposes, and the screen-printed electrodes (SPEs) represent one of the building blocks for producing novel portable devices. In this work, we have taken miR-2115-3p as model target (it is related to lung cancer), and we have developed a biosensor by exploiting the use of a complementary DNA probe modified with methylene blue as redox mediator. In particular, the chosen sensing architecture was applied to serum measurements of the selected miRNA, obtaining a detection limit within the low nanomolar range; in addition, various platforms were interrogated, namely commercial and hand-made SPEs, with the aim of providing the reader with some insights about the optimal platform to be used by considering both the cost and the analytical performance.

Nanoporous Dna Field Effect Transistor with Potential for Random‐Access Memory Applications: A Selectivity Performance Evaluation

AbstractMethods to encode digital data items as strands of synthetic DNA followed by selective data retrieval have been demonstrated. However, these initially bio‐oriented processes remain slow and not optimized. DNA field‐effect transistor (DNA‐FET) is studied here as a possible random‐access memory (RAM) device for simple, selective and rapid ssDNA fragment retrieval used as data pool identifier. The DNA‐FET is based on a co‐planar Au‐gated fully organic transistor appended with short single‐stranded DNA (ssDNA) probes bearing a blocking molecule to prevent partial hybridization and achieve near perfect selectivity for short length ssDNA (up to 45 nt). Examination of transconductance of the novel active layer incorporating a DNA nanopore architecture reveals enhanced binding site accessibility. This, in turn, facilitates discriminatory hybridization, particularly in the physical retrieval of short‐length ssDNA from a competitive, concentrated ssDNA background pool consisting of nine different sequences, with at least one nucleotide difference. The DNA‐FET exhibits rapid operation (9 min) in the millivolt range, low detection limit (sub‐femtomolar), high selectivity and reusability. Considering the straightforward concept, near error‐free identification capacity and hypothetically outstanding scalability, the DNA‐FET described here has potential as a foundation for further exploration of advanced RAM technology in the DNA data storage process.

Advanced DNA probes for imaging cell membrane order and dynamic interactions

Advanced DNA probes for imaging cell membrane order and dynamic interactions

Polydopamine Functionalized Ti3AlC2 MAX based Electrochemical Biosensor for Early and Sensitive Detection of Mycobacterium Tuberculosis

MAX phase materials have attracted considerable attention for a variety of applications, including high temperature structures and coatings, electric contacts, heat exchangers, concentrated solar power, catalysis, owing to their versatile properties that include high corrosion-resistance and mechanical strength, tunable surface kinetics, excellent thermal and radiation stability, etc. However, chemically engineered MAX phase materials are yet to be explored in development of biosensing devices. Here, for the first time, we report the development of MAX-based electrochemical platform, functionalized with polydopamine (PDA), for the reliable detection of Mycobacterium tuberculosis (MTB), a high-risk infectious pathogen that is spreading at an alarming rate regardless of age. The probe DNA immobilizes onto the surface of MAX/PDA via avidin-biotin coupling to construct ssDNA/avidin/MAX/PDA modified biosensing electrode. Cyclic voltammetry and differential pulse voltammetry results confirm the high charge transfer kinetics, good redox behavior, and excellent stability in modified electrode. Moreover, modified biosensing electrode attains extremely low detection limit of 0.1 attomolar, excellent sensitivity of 1.67 × 10-4 mA μM-1, and high selectivity with low response time towards MTB. The applicability of developed PDA functionalized MAX bio-electrodes may be extended for the detection of other infectious diseases, thus signifying how crucial is the present discovery from the perspective of controlling conventional and emerging infectious diseases and probing critical biomarkers.

A ratiometric electrochemical aflatoxin B1 aptasensor based on DNA tetrahedral scaffold-corbelled 3D DNAzyme walker and AuNP/MOF/g-C3N4 hybrid electrode

Aflatoxin B1 (AFB1) has seriously threatened human health, so it is vital to construct an efficient detection strategy for AFB1 analysis. An exquisitely designed ratiometric electrochemical aptasensor for sensitive detection of AFB1 has been successfully developed in this work. DNA tetrahedral scaffold (DTS) is used to fix the DNA probes, 3D DNAzyme walker is employed to amplify the detection signals, and the composite material AuNP/ZIF-67/g-C3N4 acts as the sensing surface of the detection electrode. In the presence of AFB1, the 3D DNAzyme walker induced the release of the oligonucleotide attached ferrocene (Fc) from the detection electrode and is simultaneously grafted the DNA-modified methylene blue (MB) onto the electrode, leading to a seesaw-like ratiometric electrochemical aptasensor. This ratiometric electrochemical aptasensor provides an outstanding AFB1 analysis in the linear range of 2.0 fg·mL−1 to 1.0 ng·mL−1 with the limit of detection (LOD) 0.67 fg·mL−1. It provides new idea for the analysis of other contaminants in foodstuffs.

Interplay of graphene-DNA interactions: Unveiling sensing potential of graphene materials.

Graphene-based materials and DNA probes/nanostructures have emerged as building blocks for constructing powerful biosensors. Graphene-based materials possess exceptional properties, including two-dimensional atomically flat basal planes for biomolecule binding. DNA probes serve as excellent selective probes, exhibiting specific recognition capabilities toward diverse target analytes. Meanwhile, DNA nanostructures function as placement scaffolds, enabling the precise organization of molecular species at nanoscale and the positioning of complex biomolecular assays. The interplay of DNA probes/nanostructures and graphene-based materials has fostered the creation of intricate hybrid materials with user-defined architectures. This advancement has resulted in significant progress in developing novel biosensors for detecting DNA, RNA, small molecules, and proteins, as well as for DNA sequencing. Consequently, a profound understanding of the interactions between DNA and graphene-based materials is key to developing these biological devices. In this review, we systematically discussed the current comprehension of the interaction between DNA probes and graphene-based materials, and elucidated the latest advancements in DNA probe-graphene-based biosensors. Additionally, we concisely summarized recent research endeavors involving the deposition of DNA nanostructures on graphene-based materials and explored imminent biosensing applications by seamlessly integrating DNA nanostructures with graphene-based materials. Finally, we delineated the primary challenges and provided prospective insights into this rapidly developing field. We envision that this review will aid researchers in understanding the interactions between DNA and graphene-based materials, gaining deeper insight into the biosensing mechanisms of DNA-graphene-based biosensors, and designing novel biosensors for desired applications.

In Situ Cas12a-Based Allele-Specific PCR for Imaging Single-Nucleotide Variations in Foodborne Pathogenic Bacteria.

In situ profiling of single-nucleotide variations (SNVs) can elucidate drug-resistant genotypes with single-cell resolution. The capacity to directly "see" genetic information is crucial for investigating the relationship between mutated genes and phenotypes. Fluorescence in situ hybridization serves as a canonical tool for genetic imaging; however, it cannot detect subtle sequence alteration including SNVs. Herein, we develop an in situ Cas12a-based amplification refractory mutation system-PCR (ARMS-PCR) method that allows the visualization of SNVs related to quinolone resistance inside cells. The capacity of discriminating SNVs is enhanced by incorporating optimized mismatched bases in the allele-specific primers, thus allowing to specifically amplify quinolone-resistant related genes. After in situ ARMS-PCR, we employed a modified Cas12a/CRISPR RNA to tag the amplicon, thereby enabling specific binding of fluorophore-labeled DNA probes. The method allows to precisely quantify quinolone-resistant Salmonella enterica in the bacterial mixture. Utilizing this method, we investigated the survival competition capacity of quinolone-resistant and quinolone-sensitive bacteria toward antimicrobial peptides and indicated the enrichment of quinolone-resistant bacteria under colistin sulfate stress. The in situ Cas12a-based ARMS-PCR method holds the potential for profiling cellular phenotypes and gene regulation with single-nucleotide resolution at the single-cell level.

AND Logic Gate-Regulated DNAzyme Nanoflower for Monitoring the Activity of Multiple DNA Repair Enzymes.

Despite the progress that has been made in diverse DNA-based nanodevices to in situ monitor the activity of the DNA repair enzymes in living cells, the significance of improving both the sensitivity and specificity has remained largely neglected and understudied. Herein, we propose a regulatable DNA nanodevice to specifically monitor the activity of DNA repair enzymes for early evaluation of cancer mediated by genomic instability. Concretely, an AND logic gate-regulated DNAzyme nanoflower was rationally designed by the self-assembly of the DNA duplex modified with both apurinic/apyrimidinic (AP) site and methyl lesion site. The DNAzyme nanoflower could be reconfigured under the repair of AP sites and O6-methylguanine sites by apurinic/apyrimidinic endonuclease 1 (APE1) and O6-methylguanine methyltransferase (MGMT) to produce a fluorescent signal, realizing the sensitive monitoring of the activity of APE1 and MGMT. Compared to the free DNAzyme duplex, the fluorescent response of the DNAzyme nanoflower increased by 60%, due to the effective enrichment of the DNA probes by the nanoflower structure. More importantly, we have demonstrated that the dual-enzyme activated strategy allows imaging of specific cancer cells in the AND logic gate manner using MCF-7 as a cancer cell model, improving the specificity of cancer cell imaging. This AND logic gate-regulated multifunctional DNAzyme nanoflower provides a simple tool for simultaneously visualizing multiple DNA repair enzymes, holding great potential in early clinical diagnosis and drug discovery.

High-volume biological sample processing using microwaves

This paper describes the design and optimization of a 10 ml cartridge for patient sample processing using a 3.5 GHz (empty resonant frequency) TM010 cylindrical microwave cavity. The cartridge has been designed to augment a novel approach for the rapid diagnosis of M. tuberculosis (the causative agent of Ttuberculosis), which uses the direct application of microwaves to a bacteria-containing sample to release pathogen-specific DNA. The target bacterial DNA is then captured and recovered using magnetic nanoparticles coated with pathogen-specific DNA probes. Excitation parameters were optimized using three surrogates for M. tuberculosis, namely, M. smegmatis, M. abscessus, and M. bovis suspended in water and simulated sputum. The paper also explores the mechanism of microwave-mediated DNA release from bacteria using scanning electron microscopy. Examination of bacteria exposed to microwaves at power levels known to mediate the release of DNA reveals no obvious signs of permanent cell disruption, suggesting that a more subtle interaction is taking place. Finally, the presence of microwave-liberated M. bovis DNA was able to be detected at a level of sensitivity comparable to that achieved using microscopy.

Determination of the interior pH of lipid nanoparticles using a pH-sensitive fluorescent dye-based DNA probe

Lipid nanoparticles (LNPs) containing ionizable cationic lipids are proven delivery systems for therapeutic nucleic acids, such as small interfering RNA (siRNA). It is important to understand the relationship between the interior pH of LNPs and the pH of the external environment to understand LNP formulation and function. Here, we developed a simple and rapid approach for determining the pH of the LNP core using a pH-sensitive fluorescent dye-based DNA probe. LNP siRNA systems containing pH-responsive DNA probes (LNP-siRNA&DNA) were generated by rapid mixing of lipids in ethanol and pH 4 aqueous buffer containing siRNA and DNA probes. We demonstrated that DNA probes were readily encapsulated in LNP systems and were sequestered into an environment at a high concentration as evidenced by an inter-probe FRET signal. It was shown that the pH of LNP encapsulated probes closely follows the pH increase or decrease of the external environment. This indicates that the clinically approved LNP RNA systems with similar lipid compositions (e.g., Onpattro and Comirnaty) are highly permeable to protons and that the pH of the interior environment closely mirrors the external environment. The pH-dependent response of the probe in LNPs was also confirmed under buffer conditions at various pHs. Furthermore, we showed that the pH-sensitive DNA probe can be incorporated into LNP systems at levels that allow the pH response to be monitored at a single LNP level using convex lens-induced confinement (CLiC) confocal microscopy. Direct visualization of the internal pH of single particles with the fluorescent DNA probe was achieved by CLiC for LNP-siRNA&DNA systems formulated under both high and normal ionic strength conditions.

Nucleic acid hybridization-based detection of pathogenic RNA using microscale thermophoresis

Infectious diseases are one of the world's leading causes of morbidity. Their rapid spread emphasizes the need for accurate and fast diagnostic methods for large-scale screening. Here, we describe a robust method for the detection of pathogens based on microscale thermophoresis (MST). The method involves the hybridization of a fluorescently labeled DNA probe to a target RNA and the assessment of thermophoretic migration of the resulting complex in solution within a 2 to 30-time window. We found that the thermophoretic migration of the nucleic acid-based probes is primarily determined by the fluorescent molecule used, rather than the nucleic acid sequence of the probe. Furthermore, a panel of uniformly labeled probes that bind to the same target RNA yields a more responsive detection pattern than a single probe, and moreover, can be used for the detection of specific pathogen variants. In addition, intercalating agents (ICA) can be used to alter migration directionality to improve detection sensitivity and resolving power by several orders of magnitude. We show that this approach can rapidly diagnose viral SARS-CoV2, influenza H1N1, artificial pathogen targets, and bacterial infections. Furthermore, it can be used for anti-microbial resistance testing within 2h, demonstrating its diagnostic potential for early pathogen detection.

An electrochemical biosensor designed with entropy-driven autocatalytic DNA circuits for sensitive detection of ovarian cancer-derived exosomes

Intelligent artificial DNA circuits have emerged as a promising approach for modulating signaling pathways and signal transduction through rational design, which may contribute to comprehensively realizing biomolecular sensing of organisms. In this work, we have fabricated an electrochemical biosensor for the sensitive and accurate detection of ovarian cancer-derived exosomes by constructing an entropy-driven autocatalytic DNA circuit (EADC). Specifically, the robust EADC is prepared by the self-assembly of well-designed DNA probes, and upon stimulation of the presence of ovarian cancer cells-derived exosomes, numerous inputs can be produced to feedback and accelerate the reaction. The catalytic abilities of the generated input sequences play a pivotal role in EADC and dramatically enhance the signal amplification capability. Through the combination of the autocatalytic circuit and circular cleavage reactions, significantly changed electrochemical signals can be recorded for sensitive analysis of the exosomes with a remarkably low detection limit of 30 particles/μL. Moreover, the proposed enzyme-free biosensor shows exceptional performance in distinguishing patient samples from healthy samples, which exhibits promising prospects for the clinical diagnosis of ovarian cancer.

A chromosome arm from Thinopyrum intermedium × Thinopyrum ponticum hybrid confers increased tillering and yield potential in wheat

Tiller number is a key component of wheat plant architecture having a direct impact on grain yield. Because of their viability, biotic resistance, and abiotic stress tolerance, wild relative species are a valuable gene source for increasing wheat genetic diversity, including yield potential. Agropyron glael, a perennial hybrid of Thinopyrum intermedium and Th. ponticum, was created in the 1930s. Recent genome analyses identified five evolutionarily distinct subgenomes (J, Jst, Jvs, Jr, and St), making A. glael an important gene source for transferring useful agronomical traits into wheat. During a bread wheat × A. glael crossing program, a genetically stable translocation line, WT153397, was developed. Sequential in situ hybridizations (McGISH) with J-, St-, and D-genomic DNA probes and pSc119.2, Afa family, pTa71, and (GAA)7 DNA repeats, as well as molecular markers specific for the wheat 6D chromosome, revealed the presence of a 6DS.6Jvs Robertsonian translocation in the genetic line. Field trials in low-input and high-input breeding nurseries over four growing seasons demonstrated the Agropyron chromosome arm’s high compensating ability for the missing 6DL, as spike morphology and fertility of WT153397 did not differ significantly from those of wheat parents, Mv9kr1 and ‘Mv Karizma.’ Moreover, the introgressed 6Jvs chromosome arm significantly increased the number of productive tillers, resulting in a significantly higher grain yield potential compared to the parental wheat cultivars. The translocated chromosome could be highly purified by flow cytometric sorting due to the intense fluorescent labeling of (GAA)7 clusters on the Thinopyrum chromosome arm, providing an opportunity to use chromosome genomics to identify Agropyron gene variant(s) responsible for the tillering capacity. The translocation line WT153397 is an important genetic stock for functional genetic studies of tiller formation and useful breeding material for increasing wheat yield potential. The study also discusses the use of the translocation line in wheat breeding.

A Single Set of Well‐Designed Aptamer Probes for Reliable On‐site Qualitative and Ultra‐Sensitive Quantitative Detection

AbstractAptamer‐based probes are pivotal components in various sensing strategies, owing to their exceptional specificity and versatile programmable structure. Nevertheless, numerous aptamer‐based probes usually offer only a single function, limiting their capacity to meet the diverse requirements of multi‐faceted sensing systems. Here, we introduced supersandwich DNA probes (SSW‐DNA), designed and modified on the outer surface of nanochannels with hydrophobic inner walls, enabling dual functionality: qualitative detection for on‐site analysis and quantitative detection for precise analysis. The fragmented DNAs resulting from the target recognition, are subsequently identified through lateral flow assays, enabling robust on‐site qualitative detection of microcystin‐LR with an impressively low limit of detection (LOD) at 0.01 μg/L. Meanwhile, the nanochannels enable highly sensitive quantification of microcystin‐LR through the current analysis, achieving an exceptionally low LOD at 2.5×10−7 μg/L, with a broad dynamic range spanning from 1×10−6 to 1×102 μg/L. Furthermore, the process of target recognition introduces just a single potential error propagation, which reduces the overall risk of errors during the entire qualitative and quantitative detection process. This sensing strategy broadens the scope of applications for aptamer‐based composite probes, holding promising implications across diverse fields, such as medical diagnosis, food safety, and environmental protection.

A Single Set of Well-Designed Aptamer Probes for Reliable On-site Qualitative and Ultra-Sensitive Quantitative Detection.

Aptamer-based probes are pivotal components in various sensing strategies, owing to their exceptional specificity and versatile programmable structure. Nevertheless, numerous aptamer-based probes usually offer only a single function, limiting their capacity to meet the diverse requirements of multi-faceted sensing systems. Here, we introduced supersandwich DNA probes (SSW-DNA), designed and modified on the outer surface of nanochannels with hydrophobic inner walls, enabling dual functionality: qualitative detection for on-site analysis and quantitative detection for precise analysis. The fragmented DNAs resulting from the target recognition, are subsequently identified through lateral flow assays, enabling robust on-site qualitative detection of microcystin-LR with an impressively low limit of detection (LOD) at 0.01 μg/L. Meanwhile, the nanochannels enable highly sensitive quantification of microcystin-LR through the current analysis, achieving an exceptionally low LOD at 2.5×10-7 μg/L, with a broad dynamic range spanning from 1×10-6 to 1×102 μg/L. Furthermore, the process of target recognition introduces just a single potential error propagation, which reduces the overall risk of errors during the entire qualitative and quantitative detection process. This sensing strategy broadens the scope of applications for aptamer-based composite probes, holding promising implications across diverse fields, such as medical diagnosis, food safety, and environmental protection.

Tetrahedral DNA nanostructures enhance transcription isothermal amplification for multiplex detection of non-coding RNAs

This study introduces an innovative detection system for multiple cancer biomarkers, employing transcription isothermal amplification methods in conjunction with a tetrahedral DNA nanostructure (TDN). We demonstrate that TDN enhances various transcription isothermal amplification methods by placing DNA probes in proximity. Notably, the TDN-enhanced split T7 promoter-based isothermal transcription amplification with light-up RNA aptamer (STAR) system stands out for its optimal performance and operational simplicity, especially in identifying non-coding RNAs such as microRNAs and long non-coding RNAs (lncRNAs). Multiplex detection of lncRNAs was also achieved by generating distinct light-up RNA aptamers, each emitting unique fluorescence signals. The system effectively identified the target lncRNAs, demonstrating high sensitivity and selectivity in both cell lines and clinical samples. The system, utilizing the single enzyme T7 RNA polymerase, can be easily tailored for alternative targets by substituting target-specific sequences in DNA probes and seamlessly integrated with other isothermal amplification methods for greater sensitivity and accuracy in the detection of multiple cancer biomarkers.