DNA-directed Immobilization Research Articles

Kinetic Analysis of Semisynthetic Peroxidase Enzymes Containing a Covalent DNA–Heme Adduct as the Cofactor

The reconstitution of apo enzymes with DNA oligonucleotide-modified heme (protoporphyrin IX) cofactors has been employed as a tool to produce artificial enzymes that can be specifically immobilized at the solid surfaces. To this end, covalent heme-DNA adducts were synthesized and subsequently used in the reconstitution of apo myoglobin (aMb) and apo horseradish peroxidase (aHRP). The reconstitution produced catalytically active enzymes that contained one or two DNA oligomers coupled to the enzyme in the close proximity to the active site. Kinetic studies of these DNA-enzyme conjugates, carried out with two substrates, ABTS and Amplex Red, showed a remarkable increase in peroxidase activity of the DNA-Mb enzymes while a decrease in enzymatic activity was observed for the DNA-HRP enzymes. All DNA-enzyme conjugates were capable of specific binding to a solid support containing complementary DNA oligomers as capture probes. Kinetic analysis of the enzymes immobilized by the DNA-directed immobilization method revealed that the enzymes remained active after hybridization to the capture oligomers. The programmable binding properties enabled by DNA hybridization make such semisynthetic enzyme conjugates useful for a broad range of applications, particularly in biocatalysis, electrochemical sensing, and as building blocks for biomaterials.

Protein Biosensors Based on Scanning Potential Hairpin Denaturation and Fluorescence Resonance Energy Transfer

Abstract The ability of detecting multiple analyses simultaneously is an important advantage of protein sensors. But the denaturation of proteins on surfaces is still a challenge. In this article, a protein biosensor providing high selectivity is introduced. This approach is based on DNA-directed immobilization(DDI) method, in which protein-DNA conjugates are immobilized on surfaces by DNA hybridization. Nonspecific binding is reduced by applying fluorescence resonance energy transfer and scanning potential hairpin denaturizing technologies. Excellent discrimination on different recognition patterns is obtained.

Preparation, structural, and optical features of two-dimensional cross-linked DNA/gold-nanoparticle conjugates.

The formation and the optical features of two-dimensional aggregates formed by DNA-directed immobilization and cross-linking of bifunctional DNA–gold nanoparticles at flat gold substrates are analyzed. The samples are structurally characterized by atomic force microscopy to evaluate the particle size, the particle densities, and the degree of aggregation. The optical characteristics determined by UV/visible measurements are correlated with the structural features observed.

Self-assembling protein arrays on DNA chips by auto-labeling fusion proteins with a single DNA address

The high-throughput deposition of recombinant proteins on chips, beads or biosensor devices would be greatly facilitated by the implementation of self-assembly concepts. DNA-directed immobilization via conjugation of proteins to an oligonucleotide would be preeminently suited for this purpose. Here, we present a unique method to attach a single DNA address to proteins in one step during the purification from the E. coli lysate by fusion to human O6-alkylguanine-DNA-alkyltransferase (SNAP-tag) and the Avitag. Use of the conjugates in converting a DNA chip into a protein chip by self assembly is demonstrated.

Direct Readout of Protein–Protein Interactions by Mass Spectrometry from Protein–DNA Microarrays

Catching proteins: Proteins from a protein–DNA microarray can be directly detected by using MALDI mass spectrometry. Capture proteins are attached to silicon chips in a highly selective and reversible way by DNA-directed immobilization (see picture). The analyte proteins bound specifically to their partners on the microarray can be detected from cell lysates.

Synthesis of Covalent Oligonucleotide‐Streptavidin Conjugates and Their Application in DNA‐Directed Immobilization (DDI) of Proteins

Semisynthetic DNA-streptavidin conjugates are synthesized by covalent coupling of thiol-modified DNA oligonucleotides and streptavidin (STV). The resulting conjugates have binding capacities for four equivalents of biotin and a complementary nucleic acid sequence. The conjugates are purified to homogeneity by ultrafiltration and chromatography, and are characterized by spectrophotometry and gel electrophoresis. Subsequently, the conjugates are applied as molecular connectors in the DNA-directed immobilization (DDI) of biotinylated antibodies using DNA microarrays as immobilization matrices. The results are protein microarrays that can be used for the multiplexed detection of various antigens.

Synthesis of covalent DNA–protein conjugates by expressed protein ligation

Semisynthetic DNA-protein conjugates are versatile tools for many applications in bioanalytics and nanobiotechnology. We here report a method based on expressed protein ligation (EPL) for the site-specific coupling of cysteine-modified DNA oligomers with recombinant intein-fusion proteins. The latter contain a C-terminal thioester, enabling the mild and highly specific reaction with N-terminal cysteine compounds. To conveniently couple commercially available DNA oligomers with cysteine groups a universal chemical modifier was developed, containing a protected cysteine and an amino-reactive N-hydroxysuccinimide group connected by a hexaethyleneglycol moiety. Using maltose-binding protein (MBP) and green fluorescent protein mutant EYFP as a model systems, we demonstrate the feasibility of this approach, as well as the integrity and functionality of the DNA-protein conjugates synthesized. We anticipate that our concept will enable many applications, such as the generation of large arrays of surface-bound, recombinant proteins assembled by means of DNA-directed immobilization.

General strategy for biosensor design and construction employing multifunctional surface-tethered components.

Biosensors function by reversibly linking bioreceptor-target analyte binding with closely integrated signal generation and can either continuously monitor analyte concentrations or be returned to baseline readout values by removal of analyte. We present an approach for producing fully reversible, reagentless, self-assembling biosensors on surfaces. In the prototype biosensor, quencher-dye-labeled biotin-linked E. coli maltose binding protein (MBP) bound in a specific orientation to a NeutrAvidin-coated surface is employed as a bioreceptor. To complete sensor formation, a modular tether arm consisting of a flexible biotinylated DNA oligonucleotide, a fluorescence resonance energy-transfer (FRET) donor dye, and a distal beta-cyclodextrin (beta-CD) analyte analogue is bound in an equimolar amount to the same surface by means of DNA-directed immobilization. After self-assembly, a baseline level of FRET quenching is observed due to specific interaction between the beta-CD of the flexible tether arm and the sugar binding site of MBP, which brings the two dyes into proximity. Addition of the target analyte, the nutrient maltose, displaces the linked beta-CD-dye of the DNA-based tether arm, and a concentration-dependent change in FRET results. Biosensor sensitivity and dynamic range can be controlled by either using MBP variants having different binding constants or by binding of modulator DNA oligonucleotides that are complementary to the flexible DNA tether. The sensor can be regenerated and returned to baseline quenching levels by washing away analyte. A complex set of interactions apparently exists on the sensing surface that may contribute to sensor behavior and range. This approach may represent a general way to assemble a wide range of useful biosensors.

Performance of antibody microarrays fabricated by either DNA-directed immobilization, direct spotting, or streptavidin–biotin attachment: a comparative study

Antibody microarrays have the potential to revolutionize protein diagnostics. The major problems in the fabrication of antibody arrays, however, concern the reproducibility and homogeneity of the attachment of the proteins on the solid substrate. We here compare the DNA-directed immobilization (DDI) method with two conventional strategies for immobilization of antibodies on glass substrates. DDI is based on the self-assembly of semisynthetic DNA–streptavidin conjugates which converts an array of DNA oligomers into an antibody microarray. DDI was compared with direct spotting of antibodies on chemically activated glass slides and with immobilization of biotinylated antibodies on streptavidin-coated slides. The immobilized antibodies were used as capture reagents in a two-sided (sandwich) immunoassay for the quantification of rabbit IgG as a model antigen. Detection limits down to 0.001 nM (150 pg/mL) were attained with all three array formats; however, DDI and direct spotting of the antibodies led to the highest fluorescence intensities. DDI led to the best spot homogeneity and intra- and interexperimental reproducibility. Moreover, DDI allowed highly economical use of antibody materials; that is, at least 100-fold less antibody is needed for preparing an array by DDI instead of by direct spotting. Taking into account the greater versatility and convenience of handling of the self-assembly approach, this study demonstrates that DDI is an advantageous alternative for generating versatile and robust protein arrays.

DDI-microFIA--A readily configurable microarray-fluorescence immunoassay based on DNA-directed immobilization of proteins.

We describe a chip-based immunoassay for multiplex antigen detection, based on the self-assembly of semi-synthetic DNA-protein conjugates to generate an easily configurable protein microarray. The general principle of this microarray-fluorescence immunoassay (microFIA) is similar to that of a two-sided (sandwich) immunoassay. However, covalent single-stranded DNA-streptavidin conjugates are employed for the efficient immobilization of biotinylated capture antibodies through hybridization to complementary surface-bound DNA oligomers. In a model system, we use the DNA-directed immobilization (DDI) of antibodies to generate an antibody microarray for the parallel detection of the tumor marker human carcinoembryonic antigen (CEA), recombinant mistletoe lectin rViscumin (rVis), ceruloplasmin (CEP), and complement-1-inactivator (C1A) in human blood serum samples. Detection limits down to 400 pg mL(-1) are reached. In addition, we describe a method for the internal standardization of protein microarray analyses, based on the simultaneous measurement of constant amounts of the blood proteins CEP and C1 A, intrinsically present in human serum, to compensate for interexperimental variations usually occurring in microarray analyses. The standardization leads to a significantly higher data reliability and reproducibility in intra- and interassay measurements. We further demonstrate that the DDI-microFIA can also be carried out in a single step by tagging of the analyte simultaneously with both capture and detection antibody and subsequent immobilization of the immunocomplex formed, on the DNA microarray capture matrix. This protocol significantly reduces handling time and costs of analysis.

Microarray‐Based in vitro Evaluation of DNA Oligomer Libraries Designed in silico

We report on the microarray-based in vitro evaluation of two libraries of DNA oligonucleotide sequences, designed in silico for applications in supramolecular self-assembly, such as DNA computing and DNA-based nanosciences. In this first study which is devoted to the comparison of sequence motif properties theoretically predicted with their performance in real-life, the DNA-directed immobilization (DDI) of proteins was used as an example of DNA-based self-assembly. Since DDI technologies, DNA computing, and DNA nanoconstruction essentially depend on similar prereguisites, in particular, large and uniform hybridization efficiencies combined with low nonspecific cross-reactivity between individual sequences, we anticipate that the microarray approach demonstrated here will enable rapid evaluation of other DNA sequence libraries.

Semi-synthetic DNA-protein conjugates: novel tools in analytics and nanobiotechnology.

This article reports on the syntheses, characterization and applications of semi-synthetic conjugates composed of nucleic acids, proteins and inorganic nanoparticles. For example, self-assembled oligomeric networks consisting of streptavidin and double-stranded DNA are applicable as reagents in immunoassays, model systems for ion-switchable nanoparticle networks as well as nanometer-scaled 'soft material' standards for scanning probe microscopy. Covalent conjugates of single-stranded DNA and streptavidin are utilized as biomolecular adapters for the immobilization of biotinylated macromolecules at solid substrates via nucleic acid hybridization. This 'DNA-directed immobilization' allows for reversible and site-selective functionalization of solid substrates with metal and semiconductor nanoparticles or, vice versa, for the DNA-directed functionalization of gold nanoparticles with proteins, such as immunoglobulins and enzymes. This approach is applicable for the detection of chip-immobilized antigens. Moreover, covalent DNA-protein conjugates allow for their selective positioning along single-stranded nucleic acids, and thus for the construction of nanometre-scale assemblies composed of proteins and/or nanoclusters. Examples include the fabrication of functional biometallic nanostructures from gold nanoparticles and antibodies, applicable as diagnostic tools in bioanalytics.

Covalent coupling of DNA oligonucleotides and streptavidin.

Semisynthetic DNA-protein conjugates are synthesized by covalent coupling of thiol-modified DNA oligonucleotides and streptavidin. The resulting conjugates have a binding capacity for four equivalents of biotin and one nucleic acid of complementary sequence. The conjugates are purified to homogeneity by ultrafiltration and chromatography and characterized by photometry and gel electrophoresis. Subsequently, the conjugates are applied as molecular linkers in the DNA-directed immobilization of a biotinylated enzyme on a microplate, containing complementary capture oligonucleotides.

Supramolecular DNA-Streptavidin Nanocircles with a Covalently Attached Oligonucleotide Moiety

Covalent hybrid conjugates consisting of streptavidin (STV) and a 24-mer single-stranded DNA oligonucleotide have been used as a starting material for the synthesis of supramolecular nanocircles. For this, the covalent hybrid conjugates were oligomerized by cross-linking with 5′,5′-bis-biotinylated double-stranded DNA (dsDNA) fragments of various length. Heat denaturation of the resulting oligomeric conjugates and subsequent rapid cooling led to the formation of the nanocircles, in which the oligonucleotide-containing STV molecule is coupled with both ends of the circular bis-biotinylated dsDNA fragment. The circular structure of the bioconjugates was established by electrophoretic studies including Ferguson plot analysis as well as by scanning force microscopy (SFM) inspection. The formation process and the stability against degradation by ligand exchange with free D-biotin was compared for the nanocircles obtained from covalent oligonucleotide-STV hybrids and native STV. The former nanocircles revealed a decreased stability with respect to ring opening than the circles obtained from native STV. This suggested that the affinity of the covalent oligonu- cleotide-STV hybrid for binding biotinylated DNA is significantly decreased. Nevertheless, the single-stranded oligonucleotide moiety of the hybrid nanocircles can be used as a molecular handle for further functionalization. For instance, it was used for the selective DNA-directed immobilization at a surface, previously functionalized with complementary capture oligonucleotides. Moreover, we demonstrate that a pair of nanocircles, containing complementary oligonucleotide moieties, can be hybridized to form specific dimers, thereby generating a novel type of supramolecular DNA-protein nanostructures.

Immobilization of gold nanoparticles on solid supports utilizing DNA hybridization

Self-organization of colloidal metal nanoparticles into micro- and nanostructured assemblies is currently of tremendous interest promising to find new size- and structure-dependent physical properties. Owing to its unique recognition capabilities and physicochemical stability, DNA can be used as a molecular linker for gold nanoparticles and is a promising construction material for their precise spatial positioning. Due to the enormous specificity of nucleic acid hybridization, the site-specific immobilization of DNA-functionalized gold colloids (1–40 nm) to solid supports, previously functionalized with a complementary DNA array, allows the fabrication of novel nanostructured surface architectures. Scanning force microscopy (SFM), used to characterize the intermediate steps of the DNA-directed immobilization (DDI) on a gold substrate, provides initial insight into the specificity and efficiency of this technique.

Nanostructured dna-protein aggregates consisting of covalent oligonucleotide-streptavidin conjugates.

Covalent conjugates consisting of streptavidin and a 24-mer single-stranded DNA oligonucleotide have been oligomerized by cross-linking with a 5',5'-bis-biotinylated 169-base-pair double-stranded DNA (dsDNA) fragment. The oligomeric conjugates formed have been analyzed by nondenaturing gel electrophoresis and scanning-force microscopy (SFM). The comparison of analogous oligomers, prepared from native STV and the bis-biotinylated dsDNA fragment, revealed that the covalent STV-oligonucleotide hybrid conjugates self-assemble to generate oligomeric aggregates of significant smaller size, containing on average only about 2.5 times less dsDNA fragments per aggregate. Likely, this is a consequence of electrostatic or steric repulsion between the dsDNA and the single-stranded oligomer covalently attached to the hybrid, as indicated from control experiments. Nevertheless, the single-stranded oligonucleotide moiety within the oligomeric conjugates can be used as a selective molecular handle for further functionalization and manipulation. For instance, it was used for specific DNA-directed immobilization at a surface, previously functionalized with complementary capture oligonucleotides. Moreover, we demonstrate that macromolecules, such as STV and antibody molecules, which are tagged with the complementary oligonucleotide, specifically bind to the supramolecular DNA-STV oligomeric conjugates. This leads to a novel class of functional DNA-protein conjugates, suitable, for instance, as reagents in immuno-PCR or as building blocks in molecular nanotechnology.

Site-selective immobilization of gold nanoparticles functionalized with DNA oligomers

The organization of metal and semiconductor nanoparticles to form micro- and nanostructured assemblies is currently of tremendous interest. This communication reports on the utilization of DNA molecules as positioning elements for generating microstructured surface architecture from gold nanoparticles. Citrate-passivated 40 nm gold colloids were modified by chemisorptive coupling with a 5′-thiol-derivatized DNA oligomer. The nucleic acid was used as a molecular handle for the specific immobilization on solid supports, previously functionalized with capture DNA oligomers, complementary to the nanoparticle-bound DNA. As a consequence of the enormous specificity of nucleic acid hybridization, the DNA-directed immobilization (DDI) allows, to site-specifically target the hybrid nanoparticles to microlocations which contain the complementary oligomers. The site-selectivity of the surface adsorption is demonstrated by immobilizing the gold colloids on a DNA microarray on a glass cover slide. Moreover, scanning force microscopy (SFM) analysis, used to characterize the intermediate steps of the DDI on a gold substrate, provided initial insights into the specificity and efficiency of this technique. The application of the DDI to fabricate complex colloidal micro- and nanostructures is anticipated.

DNA-Directed Immobilization: Efficient, Reversible, and Site-Selective Surface Binding of Proteins by Means of Covalent DNA–Streptavidin Conjugates

Covalent DNA–streptavidin conjugates have been utilized for the reversible and site-selective immobilization of various biotinylated enzymes and antibodies by DNA-directed immobilization (DDI). Biotinylated alkaline phosphatase, β-galactosidase, and horseradish peroxidase as well as biotinylated anti-mouse and anti-rabbit immunoglobulins have been coupled to the DNA–streptavidin adapters by simple, two-component incubation and the resulting preconjugates were allowed to hybridize to complementary, surface-bound capture oligonucleotides. Quantitative measurements on microplates indicate that DDI proceeds with a higher immobilization efficiency than conventional immobilization techniques, such as the binding of the biotinylated proteins to streptavidin-coated surfaces or direct physisorption. These findings can be attributed to the reversible formation of the rigid, double-stranded DNA spacer between the surface and the proteins. Moreover, BIAcore measurements demonstrate that DDI allows a reversible functionalization of sensor surfaces with reproducible amounts of proteins. Ultimately, the simultaneous immobilization of different compounds using microstructured oligonucleotide arrays as immobilization matrices demonstrate that DDI proceeds with site selectivity due to the unique specificity of Watson–Crick base pairing.

The accomodation of trivalent gold in silver chloride

The present review concerns the recent advances in DNA directed immobilization (DDI) based glycocluster array. The impact of glycan immobilization on subsequent interactions with protein is discussed and the consequent pros and cons of DDI-based glycocluster array are reviewed. Finally, application in the discovery of anti-pathogen molecules is illustrated by screening for galactose or fucose glycoclusters targeting two Pseudomonas aeruginosa virulence factors (PA-IL and PA-IIL).