Diverse Applications Research Articles

Magnetic analysis of permeability configurable nanocrystalline flake ribbons for medium frequency energy conversion applications

The novel permeability configurable nanocrystalline flake ribbons (NFR) utilizing Fe-based nanocrystalline material has been increasingly adopted in diverse energy conversion applications. However, the application-oriented magnetic properties are rarely examined. In this paper, the flexible NFR materials with different permeabilities are measured while the influence of permeability configuration is analyzed regarding the initial and amplitude permeabilities, B–H curves, and core losses. A measurement method using a full bridge inverter and LCL compensation is designed to test the magnetic material under various flux densities and in the frequency range between 50 kHz–150 kHz. In addition, ferrite materials with similar permeabilities are also tested for comparison. Results reveal that the NFR materials exhibit superior stability in terms of amplitude permeability changes and saturation capability compared with ferrites. Core loss grows with increased crushing, but permeability becomes more stable at higher frequencies. Hence, NFR materials can be matched to various applications based on their characteristics with different permeabilities. Additionally, the NFR materials have shown lower loss densities than their ferrite counterparts at high flux density conditions. Hence, the NFR material can be beneficial to achieve higher power density. Through analysis and experiments, this paper provides measurement optimization bases for practical energy conversion applications.

Impact of Protein Corona Formation and Polystyrene NanoparticleFunctionalisationon the Interaction with Dynamic Biomimetic Membranes Comprising of Integrin.

Plastics, omnipresent in the environment, have become a global concern due to their durability and limited biodegradability, especially in the form of microparticles and nanoparticles. Polystyrene (PS), a key plastic type, is susceptible to fragmentation and surface alterations induced by environmental factors or industrial processes. With widespread human exposure through pollution and diverse industrial applications, understanding the physiological impact of PS, particularly in nanoparticle form (PS-NPs), is crucial. This study focuses on the interaction of PS-NPs with model blood proteins, emphasising the formation of a protein corona, and explores the subsequent contact with platelet membrane mimetics using experimental and theoretical approaches. The investigation involves αIIbβ3-expressing cells and biomimetic membranes, enabling real-time and label-free nanoscale precision. By employing quartz-crystal microbalance with dissipation monitoring studies, the concentration-dependent cytotoxic effects of differently functionalised ~210 nm PS-NPs on HEK293 cells overexpressing αIIbβ3 are evaluated in detail. The study unveils insights into the molecular details of PS-NP interaction with supported lipid bilayers, demonstrating that a protein corona formed in the presence of exemplary blood proteins offers protection against membrane damage, mitigating PS-NP cytotoxicity.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications.

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Enhanced thermal stability and power factor in layered Bi2Se0.5Te2.5 Thin films across a broad temperature range

Bi2Te3-based n-type thin films with high thermoelectric performances are typically synthesised through the formation of dense structures, a process conventionally conducted at high temperatures. However, this method compromises thermal stability. In this study, structural design and multiple-step annealing were employed to enhance the thermal stability of high-performance Bi2Se0.5Te2.5 thin films. Post-annealing, the disparity in the values of the Seebeck coefficient over the entire test temperature range, was reduced to 20 μV K−1, which is approximately 32 % compared to pre-annealing measurements. The layered Bi2Se0.5Te2.5 thin film demonstrated an elevated power factor (28 × 10−4 W m−1K−2), which was maintained across a broad temperature spectrum. This multiple-step annealing approach not only refines the structural integrity by extending the atomic diffusion duration but also mitigates defects and augments compositional uniformity at reduced temperatures. Consequently, layered Bi2Se0.5Te2.5 films emerge as promising candidates for thermoelectric materials, offering enhanced long-term stability for diverse applications, including electric and hybrid electric vehicles, and portable electronic devices.

Plug-and-Play Algorithms for Dynamic Non-line-of-sight Imaging

Plug-and-Play Algorithms for Dynamic Non-line-of-sight Imaging

Surface Coordination Modulated Morphological Anisotropic Engineering of Iron-Benzoquinone Frameworks for Lithium-Ion Batteries.

Morphological anisotropic engineering is powerful to synthesize metal-organic frameworks (MOF) with versatile physicochemical properties for diverse applications ranging from gas storage/separation to electrocatalysis and batteries, etc. Herein, we developed a carbon substrate guided strategy for facet-anisotropic growth of Fe-THBQ (tetrahydroxy-1,4-benzoquinone) frameworks, which is built with cubic Fe octamer bridged by two parallel THBQ ligands along three orthogonal axes, extending to a three-dimensional (3D) framework with pcu-e network topology. The electronegative O-containing functional groups on carbon surfaces compete with THBQ linkers to interact with the unsaturated coordinated Fe cations on the {111} facets and selectively inhibit crystal growth along the <111> direction. The morphology of Fe-THBQ evolves from thermodynamically favored truncated cube to cuboctahedron depending on the O-containing functional groups on carbon substrate. The Fe-THBQ with varied morphologies exhibits facet-dependent performances for lithium storage. This work will shed lights on morphology modulation of MOFs for promising applications.

Triple band diamond-shaped polarization insensitive plasmonic nano emitter for thermal camouflage and radiative cooling

This study proposes the design of a novel Metal-Insulator-Metal (MIM) nano-infrared emitter that uses a unique diamond-shaped grating to achieve selective infrared absorption. Diamond-shaped nano emitter (DNE) structure exhibits four narrow resonant peaks within key absorption windows such as short-wave infrared (SWIR) mid-wave infrared (MWIR), alongside with a wide absorption band in the Non-Transmissive Infrared Range (NTIR) for thermal camouflage applications compatible with radiative cooling. Moreover, the proposed DNE is polarization insensitive as it has an in-plane symmetric design. Using the 3D Finite-Difference Time-Domain (FDTD) simulations, we demonstrate the nanoantenna’s superior performance characterized by its high absorption rates and tuned effective impedance matching. As of our knowledge, the findings suggest that this is the first time that a MIM structure achieved multiple narrow resonance peaks, located in SWIR and MWIR simultaneously, with a wide absorption range in NTIR. Represented DNE stands as a significant innovation in the field of stealth technology, providing a tunable, high-efficiency solution for managing and controlling thermal emissions across diverse applications.

Production and characterization of bacterial cellulose by Rhizobium sp. isolated from bean root

Bacterial cellulose (BC) is a natural polymer renowned for its unique physicochemical and mechanical attributes, including notable water-holding capacity, crystallinity, and a pristine fiber network structure. While BC has broad applications spanning agriculture, industry, and medicine, its industrial utilization is hindered by production costs and yield limitations. In this study, Rhizobium sp. was isolated from bean roots and systematically assessed for BC synthesis under optimal conditions, with a comparative analysis against BC produced by Komagataeibacter hansenii. The study revealed that Rhizobium sp. exhibited optimal BC synthesis when supplied with a 1.5% glucose carbon source and a 0.15% yeast extract nitrogen source. Under static conditions at 30 °C and pH 6.5, the most favorable conditions for growth and BC production (2.5 g/L) were identified. Modifications were introduced using nisin to enhance BC properties, and the resulting BC-nisin composites were comprehensively characterized through various techniques, including FE-SEM, FTIR, porosity, swelling, filtration, and antibacterial activity assessments. The results demonstrated that BC produced by Rhizobium sp. displayed properties comparable to K. hansenii-produced BC. Furthermore, the BC-nisin composites exhibited remarkable inhibitory activity against Escherichia coli and Pseudomonas aeruginosa. This study contributes valuable insights into BC’s production, modification, and characterization utilizing Rhizobium sp., highlighting the exceptional properties that render it efficacious across diverse applications.

Taxonomy of performance shaping factors in manufacturing: A systematic literature review

AbstractHuman error in manufacturing can have substantial consequences, including loss of life, injuries, productivity, and financial losses. Human reliability analysis (HRA) methods can be used to evaluate the likelihood of human error in manufacturing tasks and identify potential sources of error. Performance shaping factors (PSFs) are internal and external factors that influence human performance and can affect the likelihood of human reliability estimates in HRA methods. Understanding the impact of PSFs on human performance in manufacturing is essential for developing effective strategies to minimize the likelihood of human error and improve the safety and efficiency of manufacturing processes. This systematic review scrutinizes the literature on PSFs within manufacturing, highlighting HRA applications. Using the PRISMA protocol, studies from 2000 to 2024 across engineering and psychology were examined, culminating in the analysis of 35 pertinent works. The review identifies and contrasts various PSF taxonomies from established HRA methods like SPAR‐H, HEART, CREAM, and THERP, revealing their diverse applications in different manufacturing settings. The review also uncovers a tendency to devise taxonomies through the lens of experts' domain knowledge, particularly tailored to discrete manufacturing contexts. A critical gap is observed in the lack of a uniform PSF framework, with the current literature reflecting a disparate understanding of PSFs' roles, definitions, and interrelations. This absence is further pronounced by the inadequate integration of human factors in the dialogue surrounding Industry 4.0. The analysis points to the necessity of harmonizing PSFs to better assess human reliability amid technological integration. The findings emphasize the need for an industry‐specific PSF framework that aligns with the intricacies of manufacturing operations, thus enabling more accurate HRA outcomes and informing strategies for error reduction and process optimization.

Development of a ReaxFF reactive force field for ternary phosphate-based bioactive glasses.

Phosphate-based glasses (PBGs) in the CaO-Na2O-P2O5 system have diverse applications as biomaterials due to their unique dissolution properties. A reactive force field (ReaxFF) has been developed to simulate these materials at the atomic level. The ReaxFF parameters of PBGs, including the interaction between phosphorus and calcium atoms, have been developed using a published code based on genetic algorithms. The training data, including the atomic charges, atomic forces, bond and angle parameters, and different differential energies, are chosen and measured from static quantum-mechanical calculations and abinitio molecular dynamics of PBGs. We did different short- and medium-range structural analyses on the bulk simulated PBGs with different compositions to validate the developed potential. Radial and angular distribution functions and coordination numbers of network formers and modifiers, as well as the network connectivity of the glass, are in agreement with experimental and previous simulations using both shell-model classical force fields and abinitio simulated data; for example, the coordination number of phosphorus is 4.0. This successful development of ReaxFF parameters being able to describe the bulk PBGs enables us to work on the dissolution behavior of the glasses, including the interaction of water molecules with PBGs, in future works.

Modificación química de almidón procedente de semillas de frutos: Métodos, propiedades y aplicaciones

The fruit seeds, commonly regarded as waste after consuming the fresh pulp, emerge as a source of unconventional starch with innovative potential. This study focuses on highlighting the significance of these seeds by exploring chemical modification methods in this starch source that add value by transforming their properties. The review emphasizes the influence of key factors such as the type of chemical reagent, its concentration, reaction parameters (pH, temperature, time), and the botanical source of the seed on the degree of modification and the resulting morphological and functional properties of the starch. The importance of specific conditioning during the chemical modification process is underscored, as it significantly contributes to enhancing the properties of the modified starch derived from fruit seed. In this regard, new perspectives are opened to efficiently harness fruit seeds, turning them into a valuable source of starch with diverse applications in both the food and non-food industries.

Copper-Nanoparticle-Decorated Hydrothermal Carbonaceous Carbon-Polydimethylsiloxane Nanocomposites: Unveiling Potential in Simultaneous Light-Driven Interfacial Water Evaporation and Power Generation.

This study introduces a hydrothermal synthesis method that uses glucose and Cu2+ ions to create a Cu-nanoparticle (NP)-decorated hydrothermal carbonaceous carbon hybrid material (Cu-HTCC). Glucose serves both as a reducing agent, efficiently transforming Cu2+ ions into elemental Cu nanostructures, and as a precursor for HTCC microstructures. An enhanced plasmon-induced electric field resulting from Cu NPs supported on microstructure matrices, coupled with a distinctive localized π-electronic configuration in the hybrid material, as confirmed by X-ray photoelectron spectroscopic analysis, lead to the heightened optical absorption in the visible-near-infrared range. Consequently, flexible nanocomposites of Cu-HTCC/PDMS and Cu-HTCC@PDMS (PDMS=polydimethylsiloxane) are designed as 2 and 3D structures, respectively, that exhibit broad-spectrum solar absorption. These composites promise efficient photo-assisted thermoelectric power generation and water evaporation, demonstrating commendable mechanical stability and flexibility. Notably, the Cu-HTCC@PDMS composite sponge simultaneously exhibits commendable efficiency in both water evaporation (1.47kgm-2h-1) and power generation (32.1mV) under 1 sunlight illumination. These findings unveil new possibilities for innovative photothermal functional materials in diverse solar-driven applications.

Nanotechnology's potential in advancing renewable energy solutions

Nanotechnology has emerged as a promising frontier in the quest for sustainable energy solutions, offering transformative opportunities to address pressing challenges in renewable energy generation, storage, and conversion. This review explores the potential of nanotechnology in advancing renewable energy solutions, encompassing a wide range of applications spanning solar energy, wind energy, energy storage, and fuel cells. By leveraging the unique properties of nanomaterials, such as high surface area-to-volume ratio, tunable optical and electronic properties, and enhanced catalytic activity, researchers and engineers can develop innovative materials and devices with unprecedented performance and efficiency. Nanotechnology-enabled advancements in solar photovoltaics include the development of next-generation solar cells incorporating nanostructured materials, such as quantum dots, nanowires, and perovskite-based solar cells, to enhance light absorption, charge transport, and overall power conversion efficiency. In the realm of energy storage, nanomaterials hold promise for improving the performance and longevity of batteries, supercapacitors, and other energy storage devices through enhanced electrode materials, electrolytes, and nanostructured architectures. Furthermore, nanotechnology-driven innovations in wind energy, such as lightweight and durable nanocomposite materials for turbine blades, and advancements in fuel cell technologies, including catalyst nanoparticles for efficient hydrogen production and conversion, exemplify the diverse applications and transformative potential of nanotechnology in renewable energy. Through a comprehensive analysis of recent research and development efforts, this abstract underscores the critical role of nanotechnology in accelerating the transition to a sustainable and renewable energy future. Keywords: Nanotechnology, Renewable Energy, Solar Energy, Wind Energy, Energy Storage, Nanomaterials.

Preparations and Thermal Properties of PDMS-AlN-Al2O3 Composites through the Incorporation of Poly(Catechol-Amine)-Modified Boron Nitride Nanotubes

As one of the emerging nanomaterials, boron nitride nanotubes (BNNTs) provide promising opportunities for diverse applications due to their unique properties, such as high thermal conductivity, immense inertness, and high-temperature durability, while the instability of BNNTs due to their high surface induces agglomerates susceptible to the loss of their advantages. Therefore, the proper functionalization of BNNTs is crucial to highlight their fundamental characteristics. Herein, a simplistic low-cost approach of BNNT surface modification through catechol-polyamine (CAPA) interfacial polymerization is postulated to improve its dispersibility on the polymeric matrix. The modified BNNT was assimilated as a filler additive with AlN/Al2O3 filling materials in a PDMS polymeric matrix to prepare a thermal interface material (TIM). The resulting composite exhibits a heightened isotropic thermal conductivity of 8.10 W/mK, which is a ~47.27% increase compared to pristine composite 5.50 W/mK, and this can be ascribed to the improved BNNT dispersion forming interconnected phonon pathways and the thermal interface resistance reduction due to its augmented compatibility with the polymeric matrix. Moreover, the fabricated composite manifests a fire resistance improvement of ~10% in LOI relative to the neat composite sample, which can be correlated to the thermal stability shift in the TGA and DTA data. An enhancement in thermal permanence is stipulated due to a melting point (Tm) shift of ∼38.5 °C upon the integration of BNNT-CAPA. This improvement can be associated with the good distribution and adhesion of BNNT-CAPA in the polymeric matrix, integrated with its inherent thermal stability, good charring capability, and free radical scavenging effect due to the presence of CAPA on its surface. This study offers new insights into BNNT utilization and its corresponding incorporation into the polymeric matrix, which provides a prospective direction in the preparation of multifunctional materials for electric devices.

A Review of Real-Time Implementable Cooperative Aerial Manipulation Systems

This review paper focuses on quadrotor- and multirotor-based cooperative aerial manipulation. Emphasis is first given to comparing and evaluating prototype systems that have been implemented and tested in real-time in diverse application environments. The underlying modeling and control approaches are also discussed and compared. The outcome of this review allows for understanding the motivation and rationale to develop such systems, their applicability and implementability in diverse applications and also challenges that need to be addressed and overcome. Moreover, this paper provides a guide to develop the next generation of prototype systems based on preferred characteristics, functionality, operability, and application domain.

Stress Analysis of Transmission Shafts: A Multi-Faceted Investigation

Transmission shafts constitute pivotal components in mechanical systems, responsible for transferring power from the engine to various mechanisms. The integrity and longevity of these systems hinge on the robustness of transmission shafts, necessitating comprehensive stress analysis. This paper presents an in-depth exploration into stress analysis methodologies applied to transmission shafts. Analytical, numerical, and experimental approaches are scrutinized, with a focus on their efficacy, limitations, and advancements. Material properties, geometric configurations, loading conditions, and manufacturing intricacies are dissected to discern their influence on shaft behavior. Through this comprehensive examination, this paper endeavors to contribute to the advancement of transmission shaft design, ensuring reliability and performance across diverse engineering applications.

Electromagnetic–thermal–mass transport triple hybrid model for energy-efficient hydrogen release from metal particles by induction heating

Hydrogen storage in metals is anticipated to be a highly promising technical approach for managing hydrogen in diverse energy applications, emphasizing the need to establish efficient operating conditions. In this study, we developed a numerical model that can simultaneously calculate hydrogen and heat transport combined with electromagnetic induction heating of metal particles. Using the developed numerical simulator, we investigated the behavior of the hydrogen release process from the hydrogen-absorbing metal and proposed important indicators for the operation. The fractions of the electromagnetic energy absorbed by the metal particle used for the hydrogen release, sensible heat, interfacial heat conduction, and thermal radiation were systematically evaluated. Considering the trade-off between temperature rise and the hydrogen concentration gradient, an optimal diameter of metal particles existed for the maximum hydrogen release rate. Similarly, the trade-off between temperature rise and energy consumption revealed an optimal electromagnetic power density for the heat utilization fraction for hydrogen release. Our electromagnetic–thermal–mass transport triple hybrid model constitutes a useful numerical simulator for the design of energy-efficient hydrogen storage systems.

Development of New Polyimide/Spirulina Hybrid Materials: Preparation and Characterization

This study presents the synthesis and characterization of polyimide (PI-2) films incorporated with spirulina powder for potential biomedical applications. The synthesis of PI-2 was achieved through a two-step polycondensation reaction using N-methyl-2-pyrrolidone (NMP) as the solvent. The incorporation of spirulina was systematically varied to investigate its effects on the structural and surface properties of the hybrid materials. Scanning electron microscopy revealed a tightly bound interface between spirulina and the PI-2 matrix, indicating effective dispersion and strong interfacial adhesion. Profilometry and Raman spectroscopy confirmed the homogeneous integration of spirulina within the polymer matrix, with resulting variations in surface roughness and chemistry. Contact angle measurements demonstrated altered wettability characteristics, with increased hydrophilicity observed with spirulina incorporation. Furthermore, blood component interaction studies indicated the variations in adhesion behavior observed for red blood cells, platelets, and plasma proteins. Water uptake studies revealed enhanced absorption capacity in PI-2 films loaded with spirulina, highlighting their potential suitability for applications requiring controlled hydration. Overall, this comprehensive characterization elucidates the potential of PI-2/spirulina hybrid materials for diverse biomedical applications, offering tunable properties that can be tailored to specific requirements.

How do the non‐linear I–V curves of ZnO‐based adaptive composites behave with electrodes placed on the opposite sides with a series of horizontal distances?

AbstractRecently, ZnO‐based composites have been widely applied in the field of electric power. To meet the diverse application requirements, it is necessary to figure out the I–V characteristics of ZnO composites whose high‐voltage and ground‐voltage electrodes are arranged on the opposite sides with a certain horizontal distance. 30 vol%, 40 vol% and 50 vol% ZnO‐based silicone rubber composites were prepared. The horizontal distance between their electrodes was set as 50, 100, 500 μm, 1 and 2 mm, respectively. Results showed that with the increase of ZnO fillers volume fraction under a fixed horizontal distance of 100 μm, from 30 vol% to 50 vol%, the I–V curves shifted left, the leakage current increased and the switching voltage decreased. When the horizontal distance between electrodes increased from 50 μm to 1 mm under a fixed doping concentration of 40%, the I–V curves shifted to the right, the leakage current dropped and the switching voltage rose. The mathematical and physical models were established to explain the results. This work provides a referential significance for the practical application of ZnO composites, such as 5G folding mobile phones and power electronic modules.

ADVANCED SHOPLIFTING PREVENTION AND ALERT STSYEM

Detecting human beings accurately in a visual surveillance system is crucial for diverse application areas including abnormal event detection, human gait characterization, congestion analysis, person identification, gender classification and fall detection for elderly people. The first step of the detection process is to detect an object which is in motion. Object detection could be performed using YOLOv7, optical flow and spatio-temporal filtering techniques. Once detected, a moving object could be classified as a human being using shape-based, texture-based or motion-based features. A comprehensive review with comparisons on available techniques for detecting human beings in surveillance videos is presented in this paper. The characteristics of few benchmark datasets as well as the future research directions on human detection have also been discussed. We can use camera for Human Motion Detection. The Camera is used to catch the live images of the area in which it is being implemented, if any object is moving. The captured images are stored for further work. If motion is found in this video, the computer will start recording, buzz an alarm and send SMS to people listed in its database. In this way the system will provide the security against any misdeed. Keywords: YOLOv7, SMS, E-mail, CCTV, SMTP, RFID