Simulation Of Distribution Research Articles

Field Performance Testing and Test Codes for Gas Compressors

Abstract Field testing of gas compressor packages requires the accurate determination of efficiency, capacity, head, and power in sometimes less than ideal working environments. The results of field tests have significant implications for the compressor manufacturers and their customers, as economic considerations demand that the performance and efficiency of an installation are verified to assure a project's return on investment. Thus, for the compressor manufacturers, as well as for the end-user, an accurate determination of the compressor performance in the field is of vital interest. While field performance tests have to be executed under conditions dictated by the situation at site, factory test codes like ASME PTC10 and ISO 5389 provide guidance. The former code was recently revised, so a discussion of this revised code in the context of site performance testing is appropriate. A key change in PTC10 is the method to calculate polytropic work, which affects data reduction. It also affirms a method to calculate error propagation and test uncertainties. The discussion includes the appropriate use of Equations of State, and the definition of steady state requirements. Different methods to define valid operating conditions for the test, based on similarity considerations are compared. However, field tests, unlike factory tests, are ultimately conducted based on the conditions at site which may or may not conform with test codes, Therefore, calculation of test uncertainties, and the use of observations not covered by the codes are emphasized. The paper attempts to provide guidance for the conduct of field performance tests.

Development of a virtual teaching module for advanced semiconductor fabrication and its learning effectiveness analysis

AbstractSemiconductor fabrication is the process of manufacturing semiconductor devices, typically integrated circuits (ICs) such as microprocessors and memory. This involves transferring circuit diagrams onto a silicon wafer using photomasks and photoresists. After a series of fabrication processes, ICs are created on the wafer surface and then diced into individual chips, which are packaged and tested with quality control procedures to become the final products. Virtual reality (VR) simulates imaginary experiences or environments difficult to achieve in the real world through human senses and immersive equipment, allowing users to interact in a virtual 3D space in real time, making it well suited for applications in science education and industrial training. This study transforms the essential knowledge of advanced semiconductor manufacturing processes into an easily understandable virtual teaching module, thereby creating educational resources for high school and college students. The objective is to enhance their scientific and technological literacy, yielding substantial benefits for the general public. This study utilized VR technology to simplify and clarify the knowledge about the semiconductor manufacturing process, making it more engaging for learners. The virtual teaching module's learning content includes an overview of wafer preparation, semiconductor fabrication, chip packaging, and IC testing. Users can interact with the virtual teaching module and conduct virtual experiments to enhance their understanding by trial and error. Experimental results show that it can improve students' learning achievement and learning motivation. Therefore, the virtual teaching module is suitable for high‐school students and the general public to understand semiconductor technology and its applications. The effectiveness of the virtual teaching module is heavily dependent on the availability and quality of VR hardware and software. Limited access to advanced VR equipment or technical issues could have affected the learning experience, thereby influencing the learning outcomes.

Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass

ABSTRACTIn the approval process of dangerous goods packagings, drop tests onto a flat, essentially unyielding surface are used to assess resistance against mechanical damage. International adopted regulations like ADR and RID define filling good dependent drop heights and filling degrees whilst the user needs to define the maximum gross mass to be tested and approved. Maximum packaging gross mass is defined conservatively and not reached in practice. To meet the defined gross mass in testing, using additives is permitted. However, in some cases, additives are not desirable due to packaging design or filling substance properties. This leads to deviations from the initial gross mass definition. Hence, a certain drop height adjustment is necessary to achieve the required impact loading. Laboratories frequently adjust drop height assuming a perfectly elastic collision that is inaccurate. Appropriate adjustment is not trivial due to energy conversion processes, for example, plastic deformation. In this work, a test stand is developed for measuring the change in kinetic energy of different packaging designs and filling substances in regulative drop tests. The experimental results are used to validate finite‐element (FE) models so that packaging properties can be varied in simulated drop test scenarios. The findings intend to describe the appropriate drop height adjustment of the respective packaging with same design but deviating gross mass to produce comparable mechanical response. The results are highly beneficial for testing laboratories, approval issuing authorities and packaging institutes confronted with the problem of testing packages with gross masses other than those to be approved.

Development of cellulose-based self-healing hydrogel smart packaging for fish preservation and freshness indication

Biomass-based composite packaging materials loaded with functional fillers have good application prospects in food preservation and freshness detection. Self-healing hydrogel packaging films based on nanocellulose (CNF), polyvinyl alcohol (PVA), and ZIF-8 embedded with curcumin (Cur@ZIF-8) were developed in this study. The synthesis of Cur@ZIF-8 was demonstrated by characterization experiments. The addition of Cur@ZIF-8 enhanced the water vapor barrier property, tensile strength, and elongation at break of hydrogel films by 49.2 %, 193.5 %, and 172.9 %, respectively, and endowed them with excellent antimicrobial, antioxidant, and ammonia sensitivity. In packaging tests with fish, hydrogel films loaded with Cur@ZIF-8 inhibited spoilage and microbial growth to extend the shelf life of fish to 9 days, and the color change of hydrogel films allowed for real-time monitoring of fish freshness. This study provided a new solution for smart packaging materials with dual functions of preservation and freshness indication.

Multifunctional performance of chitosan/soy protein isolation-based films impregnated carbon dots/anthocyanin derived from purple hull pistachio for tracking and extending the shelf life of fish

The present study aimed to develop a sustainable biopolymer film that exhibits active and intelligent properties. The chitosan/soy protein isolation (Cs/SPI) based film was prepared by blending purple hull pistachio anthocyanin (PHPA) with carbon dots (CDs), which were synthesized using a by-product from purple hull pistachio (PHP) extraction. PHPA and CDs were shown to be compatible with the Cs/SPI biopolymer films. The resulting matrix was a homogeneous film with improved physico-mechanical properties. The biopolymer films were characterized by their various desirable properties, including 100% UV protection, potent antibacterial activity against S.aureus and E. coli strains with inhibition zonoe about 22.1 ± 36±0.24 mm and 20.36 ± 0.21 mm, respectively, and strong antioxidant properties (DPPH; 82.3 ± 0.1 % and ABTS; 90.6 ± 0.1 %). The film was also found to exhibit distinguishable colorimetric responses to pH 2–12 buffers and volatile ammonia. The packaging test of CS/SPI/PHPA/PHP-CDs film in scenario one (intelligent assay) for evaluation through fish freshness monitoring showed that the film's color changed from light pink (fresh fish) to yellow/brownish (spoilage fish) during storage at 4 °C and 25 °C. Also, scenario two (active assay) at 4 °C showed the ability to increase the shelf life of fish up to 12 days. The study demonstrated that the biopolymer films have exhibited exceptional adaptability, making it a highly promising option for prompt and effective on-site detection of food quality. Furthermore, the film's capacity to prolong the shelf life of fish and reduce the rate of quality degradation during storage positions it as an outstanding contender for multifunctional film applications in the food industry.

Barriers to Successful Beekeeping: Insights from the Jammu Region of Jammu and Kashmir, India

This study focused on the constraints faced by the beekeepers of Jammu region of Jammu and Kashmir, evaluating constraints perceived by the beekeepers identified from Krishi Vigyan Kendras (KVKs) who have been involved in beekeeping for the last five years at least and the list contained eight beekeepers. By using the sampling method with replacement, the sample size of eight beekeepers were interviewed two times and comparison made for three time periods or years viz; 2019-20, 2021-22 and 2023-24, which made the ultimate sample size of twenty four (24) beekeepers. For analyzing the data collected for three time periods, Henry Garrett’s ranking and Chi-square test were used. Findings indicated that major production constraints were the disease of honey bees (78.60), death of the colony (70.00), and heavy rainfall (61.00). Marketing constraints included the fluctuating price of raw honey (69.20), unorganized and unregulated markets (63.20) and lack of government concern or support for the marketing of honey (55.80). Economic constraints featured the huge cost of investment is ranked first with an average score of 71.00, followed by no insurance facilities for the beehives with an average score of 53.67 and lack of credit supply for costly implements used in processing, packaging and quality testing (50.67). Chi-square test revealed that only two constraints under production problems such as, the lack of beehive equipments and materials in the local market (14.77) and pesticide poisoning (7.88) were significant and were showing dependency over the years. By addressing all these constraints through targeted interventions could significantly enhance the viability of beekeeping.

Effects of graphene oxide and silane‐grafted graphene oxide on chitosan packaging nanocomposite films for bread preservation

AbstractThis study aims to investigate the dual effects of (3‐aminopropyl)triethoxysilane (APTES)‐grafted‐GO (A‐g‐GO), and titanium dioxide (TiO2) on the novel chitosan (CS) packaging nanocomposite films developed via the solution‐casting method. The chemical properties of GO and A‐g‐GO were assessed using FTIR and XRD. Subsequently, the chemical, structural, and physical attributes of all chitosan packaging nanocomposite films were analyzed through FTIR, XRD, TGA, DSC, AFM, water contact angle analysis, and food packaging tests. Successful silanization of GO by APTES was first confirmed. The highest surface roughness value was observed in the CS/A‐g‐GO/TiO2 film (16.574 nm) compared to pristine CS and other nanocomposite films. Incorporating GO into the CS matrix improved its thermal stability, suggesting robust bonding between GO and the polymer matrix. The addition of A‐g‐GO slightly decreased the contact angle value (107.7° for CS/A‐g‐GO), whereas TiO2 increased contact angles (117.3° for CS/GO/TiO2 and 119.4° for CS/A‐g‐GO/TiO2), suggesting a more hydrophilic structure with GO and A‐g‐GO and a more hydrophobic structure with TiO2. Bread samples showed no structural distortion over 40 days. Therefore, the dual impacts of A‐g‐GO and TiO2 on the pristine CS film imply that the resulting CS/A‐g‐GO/TiO2 film exhibits potential as an exceptionally efficient packaging material for prolonging the freshness of bread.

Polyphenolic truxillic acid crosslinked sodium alginate film with notable antimicrobial and biodegradable properties for food packaging

This work demonstrated an innovative antimicrobial and biodegradable food packaging film CBDA-10-SA which was prepared by crosslinking a natural polyphenolic truxillic acid (cyclobutane-dicarboxylic acid, CBDA-10) and sodium alginate (SA). The CBDA-10-SA film exhibited improved tensile strength (148 MPa) and UV shielding capabilities. The maximum thermal decomposition temperature was achieved of 249 °C. Compared to SA film, CBDA-10-SA showed increased antibacterial activities. In food packaging test, the CBDA-10-SA inhibited the rapid growth of potential of hydrogen (pH) value, slowed down the weight loss, reduced total plate count (TPC) value of pork, and delayed the spoilage process of pork. Notably, CBDA-10-SA displayed remarkable degradability in soil, with 60 % degrading in four weeks. In this study, CBDA-10-SA showed enhanced physicochemical and mechanical properties compared to traditional SA film. Those improvements make it anticipated to be used in not only food packaging but also mechanical, pharmaceutical, and agricultural fields.

Advances in space food processing: From farm to outer space

Space is the final frontier and mankind has long desired to explore the vast expanse of the universe in the pursuit of finding new worlds. The need for nutritious and long-lasting food during deep space missions have however, been an impediment to this quest. Although challenging, researchers from different public and private space organizations and institutes have come together striving hard to develop food processes, product quality and safety protocols for advancing the field of space foods. Even NASA has proposed nanomaterial-based packaging to preserve space foods longer than 5 years. Therefore, a fresh outlook is required on processing and packaging technologies currently adopted for the preparation of space foods. This review provides an overview of the inception of space foods followed by its physico-chemical and microbiological quality considerations, and processing and packaging technologies. The market opportunities available for space foods has also been covered highlighting the major players in the space food processing sector. Literature review indicates that freeze-drying has been used as a space food preservation technology of choice for years, but the combination of high-pressure processing and thermal treatment is now gaining attention due to its potential in extending the shelf life of space foods upto 5 years. Besides, 3D printing has also emerged as an economically viable technology for producing more nutritious and organoleptically appealing space foods. Currently, the major constraint for space food research is simulating the environment of space for testing food processes and packaging materials which could be explored.

Active packaging films based on poly(butylene succinate) films reinforced with alkaline halloysite nanotubes: Production, properties, and fruit packaging applications

Alkaline treated halloysite nanotubes (aHal) were introduced into poly(butylene succinate) (PBS) matrix using melt blending and solvent casting techniques to enhance the functional properties. The films were characterized for morphological, thermal, mechanical, antibacterial, barrier, and ethylene scavenging properties for their fresh food packaging use. The films exhibited ethylene scavenging performance because of the increased lumen diameter of aHal. The highest ethylene scavenging performance was achieved at 5 wt% aHal (5-aHal) loading for both production methods. The amount of ethylene in the gas-tight container decreased by 80% and 75% in the presence of extruded and solvent-cast 5-aHal, respectively. While PBS/aHal films have mechanical properties comparable to other films recommended for food packaging, extruded films were more flexible and durable than solvent-cast films. In addition, extruded films were found to have a higher water vapor barrier. A packaging test has also been carried out on sliced tomatoes and apples stored at room conditions for 7 days. 5-aHal films showed the best performance in extending the fruit's shelf life. Considering all the results, the melt blending films offer superior performance. Bio-based PBS/aHal films have the capability to contribute significantly to the food safety by serving as eco-friendly, active food packaging materials.

Early stress in maternal deprivation affects the expression of OX1R in the limbic system of the brain and contributes to the development of anxiety-depressive symptoms in rats

BACKGROUND: Depressive states are becoming an increasingly common mental disorder and a serious social problem that places a heavy economic burden on society. Increasing data from preclinical and clinical studies indicate that orexins (neuropeptides, also known as hypocretins) and their receptors are involved in the pathogenesis of depression. The orexinergic system regulates disrupted functions in depressive states, such as sleep, reward system, eating behavior, stress response, and monoaminergic regulation. However, the exact role of orexins in behavioral and neurophysiological disorders in depression is still unclear. AIM: This study aimed to examine the effect of early postnatal stress on the expression of OX1R orexin in the limbic system and the development of anxiety-depressive symptoms in rats. MATERIALS AND METHODS: Maternal deprivation was used as a model of early postnatal stress (postpartum days 2–12). The animals were divided into the control (n = 20) and maternal deprivation (n = 20) groups. On day 90 of life, the influence of early postnatal stress on the development of anxiety-depressive symptoms in adult rats was analyzed using a package of behavioral tests, namely, raised cruciform maze, forced swimming Porsolt test, and two-bottle test. After the experiments, the animals were killed by decapitation, the brain was extracted and placed in the cold, and brain structures (hypothalamus and amygdala) were isolated, immediately frozen in liquid nitrogen, and stored at a temperature of −80°C for polymerase chain reaction analysis. RESULTS: In the “raised cruciform maze,” the maternal deprivation group spent less time in the open arms of the maze, and the time spent in the closed sleeves increased relative to the control, which can be assessed as an increase in anxiety levels. In the Porsolt test, the maternal deprivation group had increased immobilization time relative to the control group. In the two-bottle sucrose preference test, the maternal deprivation group demonstrated a decreased preference for sucrose solution, which indicates the development of anhedonia. In the hypothalamus, the mRNA expression level of OX1R significantly decreased in the experimental group compared with that in the control group. A twofold decrease in the mRNA expression level of OX1R was also observed in the amygdala of the experimental group compared with that of the control group. CONCLUSIONS: Early stress caused by maternal deprivation resulted in a decrease in OX1R orexin expression in the hypothalamus and amygdala and contributed to the development of anxiety-depressive symptoms in rats.

Enrichment of Rare Variants of Hemophagocytic Lymphohistiocytosis Genes in Systemic Juvenile Idiopathic Arthritis.

Our objective was to evaluate whether there is an enrichment of rare variants in familial hemophagocytic lymphohistiocytosis (HLH)-associated genes among patients with systemic juvenile idiopathic arthritis (sJIA) with or without macrophage activation syndrome (MAS). Targeted sequencing of HLH genes (LYST, PRF1, RAB27A, STX11, STXBP2, UNC13D) was performed in patients with sJIA from an established cohort. Sequence data from control participants were obtained in silico (database of Genotypes and Phenotypes: phs000280.v8.p2). Rare variant association testing (RVT) was performed with sequence kernel association test package. Significance was defined as P < 0.05 after 100,000 permutations. Sequencing data from 524 sJIA cases were jointly called and harmonized with exome-derived target data from 3,000 controls. Quality control operations produced a set of 480 cases and 2,924 ancestrally matched control participants. RVT of cases and controls revealed a significant association with rare protein-altering variants (minor allele frequency [MAF] < 0.01) of STXBP2 (P = 0.020) and ultrarare variants (MAF < 0.001) of STXBP2 (P = 0.006) and UNC13D (P = 0.046). A subanalysis of 32 cases with known MAS and 90 without revealed a significant difference in the distribution of rare UNC13D variants (P = 0.0047) between the groups. Additionally, patients with sJIA more often carried two or more HLH variants than did controls (P = 0.007), driven largely by digenic combinations involving LYST. We identified an enrichment of rare HLH variants in patients with sJIA compared with controls, driven by STXBP2 and UNC13D. Biallelic variation in HLH genes was associated with sJIA, driven by LYST. Only UNC13D displayed enrichment in patients with MAS. This suggests that HLH variants may contribute to the pathophysiology of sJIA, even without MAS.

Study and Design of Corrugated Cardboard Trays With Microwaves by Experimental Analysis (EA) and Finite Element Methods (FEM)

ABSTRACTThe purpose of the work is to study by experimental analysis and finite element methods the mechanical response of a packaging, consisting of a corrugated cardboard container, used for the transport of fruit and vegetables. During the container design, three different configurations were selected which differ both in the choice of liner and in the type of wave. In particular, the type E, F and N microwaves were chosen. They are characterized by a lower amplitude than the high and medium waves commonly used in corrugated cardboard packaging, making it possible to reduce material consumption and, consequently, costs. In the initial phase of the study, experimental tests were performed to evaluate the mechanical strength of the liners. In addition, edge compression tests (ECTs) were performed to determine the stacking resistance of the structure. The break‐in resistance of the structures was analysed using a test conducted according to an internal standard, called strength packaging test (SPT). Subsequently, a parametric study was set up with the finite element method for the simulation of the mechanical behaviour of the three structures, using the homogenization technique. The comparison between the maximum total deformations, measured experimentally and calculated numerically, has highlighted the need to introduce corrective coefficients to improve the homogenization of the wave structure. In this way, it was possible to improve the matching of the results obtained on the structures simulated by the homogenization technique and those obtained on the corresponding real structures.

Which one is more accurate, BILOG or R program? (a comparison for score test equating)

Evaluation may be carried out using different tests that are not necessarily parallel. Students with lower abilities may get higher scores while those with higher abilities get lower scores. Measurement errors caused by this condition require test equating. Several computer programs, including Bilog and the R program, can be used for test equating. Each program has a different level of accuracy, and the accuracy of the equating results will affect the standard errors of equating. This study aimed to find out the most accurate equating test method and the accuracy of the estimated BILOG and R program. This research used two sets of tests with equivalent group designs. The determination of the most accurate equating method was based on the root mean square deviation (RMSD) value. Equating test packages, A to package B with BILOG program estimation on the mean and Sigma method resulted in RMSD value of 0.320. In the mean and mean method, RMSD value is 0.250. Meanwhile, equating package A to package B using R program on the mean and sigma resulted in RMSD value of 0.300, and the mean and mean method with the RMSD value is 0.272. The mean and mean yield RMSD values smaller than the mean and sigma methods. Therefore, the mean and mean method is more accurate and applicable. Moreover, the estimation results of the BILOG program are more accurate and can be used in test equating.

Experimental evaluation of performance parameters of a domestic freezer under door opening conditions

The current study focuses on a comprehensive experimental assessment of the cooling system parameters of a domestic-type upright freezer that is equipped with shelves and test packages under periodic door opening conditions, referring to real user scenarios. The influence of varying ambient relative humidity levels as well as the load state of the cabinet are taken into account. The study reveals that both heat and moisture have a crucial effect on the average air temperature inside the cabinet, the temperature of the walls, the transient evaporation and condensation pressure behaviour of the refrigerant, as well as the compressor power, the total operation ratio of the compressor, and the overall amount of energy consumption. The specific performance experiments are conducted at 32 °C ambient and 35 %, 65 %, and 85 % relative humidity conditions with unloaded, half-loaded, and full-loaded cases. The obtained data and results are evaluated between frosting, influenced by altering ambient humidity levels, and cabinet load state under periodic door openings where the variation in energy consumption is clearly measured. Consequently, the amounts of frost accumulation in the cabinet under half and full loaded conditions at 32 °C an 85 % relative humidity conditions are observed to be about 220 g and 270 g, respectively, followed by regular door openings and closings which result in a raise in total energy consumption rate of 7.6 % and 11.2 % compared to the period before the door opening. The frost accumulation in the full loaded condition at 32 °C and 85 % RH is found to be 2.4 times greater than the unloaded condition with a relative humidity (RH) of 35 % whereas the energy consumption is 3.7 times higher.

CWAS-Plus: estimating category-wide association of rare noncoding variation from whole-genome sequencing data with cell-type-specific functional data.

Variants in cis-regulatory elements link the noncoding genome to human pathology; however, detailed analytic tools for understanding the association between cell-level brain pathology and noncoding variants are lacking. CWAS-Plus, adapted from a Python package for category-wide association testing (CWAS), enhances noncoding variant analysis by integrating both whole-genome sequencing (WGS) and user-provided functional data. With simplified parameter settings and an efficient multiple testing correction method, CWAS-Plus conducts the CWAS workflow 50 times faster than CWAS, making it more accessible and user-friendly for researchers. Here, we used a single-nuclei assay for transposase-accessible chromatin with sequencing to facilitate CWAS-guided noncoding variant analysis at cell-type-specific enhancers and promoters. Examining autism spectrum disorder WGS data (n = 7280), CWAS-Plus identified noncoding de novo variant associations in transcription factor binding sites within conserved loci. Independently, in Alzheimer's disease WGS data (n = 1087), CWAS-Plus detected rare noncoding variant associations in microglia-specific regulatory elements. These findings highlight CWAS-Plus's utility in genomic disorders and scalability for processing large-scale WGS data and in multiple-testing corrections. CWAS-Plus and its user manual are available at https://github.com/joonan-lab/cwas/ and https://cwas-plus.readthedocs.io/en/latest/, respectively.

Field testing of user-friendly perennial malaria chemoprevention packaging in Benin, Côte d’Ivoire and Mozambique

BackgroundPerennial malaria chemoprevention (PMC) aims to protect children at risk from severe malaria by the administration of anti-malarial drugs to children of defined ages throughout the year. Sulfadoxine-pyrimethamine (SP) has been widely used for chemoprevention in Africa and a child-friendly dispersible tablet formulation has recently become available.MethodsThis qualitative non-interventional observational study was conducted in Benin, Côte d’Ivoire, and Mozambique between February and June 2022. Prototype blister packs, dispensing boxes and job aids designed to support dispersible SP deployment for PMC were evaluated using focus group discussions (FGD) and semi-structured in-depth individual interviews (IDI) with health authorities, health personnel, community health workers (CHWs) and caregivers. The aim was to evaluate knowledge and perceptions of malaria and chemoprevention, test understanding of the tools and identify gaps in understanding, satisfaction, user-friendliness and acceptability, and assess the potential role of CHWs in PMC implementation. Interviews were transcribed and imported to ATLAS.ti for encoding and categorization. Thematic content analysis used deductive and inductive coding with cross-referencing of findings between countries and participants to enrich data interpretation. Continuous comparison across the IDI and FGD permitted iterative, collaborative development of materials.ResultsOverall, 106 participants completed IDIs and 70 contributed to FGDs. Malaria was widely recognised as the most common disease affecting children, and PMC was viewed as a positive intervention to support child health. The role of CHWs was perceived differently by the target groups, with caregivers appreciating their trusted status in the community, whereas health authorities preferred clinic-based deployment of PMC by health professionals. Empirical testing of the prototype blister packs, dispensing boxes and job aids highlighted the context-specific expectations of respondents, such as familiar situations and equipment, and identified areas of confusion or low acceptance. A key finding was the need for a clear product identity reflecting malaria.ConclusionSimple modifications profoundly affected the perception of PMC and influenced acceptability. Iterative quantitative investigation resulted in PMC-specific materials suited to the local context and socio-cultural norms of the target population with the aim of increasing access to chemoprevention in children most at risk of severe malaria.

Prevalence of urinary tract infections in pregnant women and antimicrobial resistance patterns in women in Riyadh, Saudi Arabia: a retrospective study

BackgroundUrinary tract infections (UTIs) are one of the most common health problems worldwide and mainly affect women. This study aimed to evaluate the prevalence of UTIs in pregnant women and determine the antimicrobial resistance patterns of bacterial pathogens isolated from pregnant and nonpregnant women in Riyadh, Saudi Arabia.MethodsThis retrospective cohort study was conducted at an academic medical center in Riyadh, Saudi Arabia, from January to June 2022. The study included all urine cultures performed for adult women during the study period. We excluded urine culture performed for women on antibiotics prescribed for any infection, children, and men. Using the SPSS (version 27) package, descriptive statistics and chi-square tests were used to analyze the data, and p < 0.05 was considered to indicate statistical significance.ResultsA total of 2,418 urine cultures performed during the study period were included (985 and 1,433 for pregnant and nonpregnant women, respectively). The overall prevalence of UTIs in pregnant women was 5% (95% CI 3.6–6.4); 10 (1%) women were symptomatic, and 40 (4%) women were asymptomatic. Of the entire cohort, 244 (10.1%) women were diagnosed with UTIs based on bacterial cultures. The predominant bacteria in both pregnant and nonpregnant women were Escherichia coli (134, 54.9%), followed by Klebsiella pneumoniae (48, 19.6%).The antibiotic susceptibility criteria for Escherichia coli and Klebsiella pneumoniae were as follows: nitrofurantoin (94% and 18.8%, respectively), amoxicillin-clavulanic acid (82.8% and 70.8%, respectively), ciprofloxacin (65.7% and 83.3%, respectively), trimethoprim-sulfamethoxazole (65.7% and 79.2%, respectively) and cephalothin (47% and 68.8%, respectively).ConclusionCompared to the findings of other similar studies, the prevalence of UTIs was lower in pregnant women. This may be because the patient population was composed of healthy and educated women who received prenatal education and underwent prenatal assessment as per institutional guidelines. Nitrofurantoin and amoxicillin-clavulanic acid are recommended for use as an empirical therapy for UTIs in pregnant and nonpregnant women because bacteria have the least amount of resistance to these drugs.

Development of smart colorimetric indicators for tracking kimchi freshness by loading aronia extract in agar, κ-carrageenan, and cellulose nanofiber films

Color indicator films incorporating aronia extract powder (AEP) and biopolymers like agar, carrageenan, and cellulose nanofiber (CNF) were developed to monitor kimchi freshness. AEP-containing films showed strong UV-barrier properties, and reduced light transmittance by 99.12 % for agar, 98.86 % for carrageenan, and 98.67 % for CNF-based films. All AEP-films exhibited high sensitivity to pH changes and vapor exposure to ammonia and acetic acid. Color change notably influenced by the polymer type, particularly evident with ammonia vapor exposure, especially in the AEP/carrageenan film. The chemical structure and thermal stability of the biopolymers remained unchanged after AEP-addition. Tensile strength increased by 24.2 % for AEP/CNF but decreased by 19.4 % for AEP/agar and 24.3 % for AEP/carrageenan films. AEP-containing films displayed strong antioxidant activity, with 99 % free radical scavenging in ABTS and ~ 80 % in DPPH assays. Alkalized AEP-indicator films were more effective in detecting color changes during kimchi packaging tests. Among the labels, alkalized AEP/agar film showed the most obvious color change from green-gray (fresh kimchi, pH 5.5, acidity 0.48 %) to pale brown (optimal fermentation, pH 4.6, acidity 0.70 %), and pale violet-brown (over-fermented, pH 3.80, acidity 1.35 %). Alkalized AEP-indicator films offer promising real-time detection of packed fermented foods like kimchi.

Facilitators of and Barriers to the Use of a Digital Self-Management Service for Diagnostic Testing: Focus Group Study With Potential Users.

Health care lags in digital transformation, despite the potential of technology to improve the well-being of individuals. The COVID-19 pandemic has accelerated the uptake of technology in health care and increased individuals' willingness to perform self-management using technology. A web-based service, Directlab Online, provides consumers with direct digital access to diagnostic test packages, which can digitally support the self-management of health. This study aims to identify the facilitators, barriers, and needs of Directlab Online, a self-management service for web-based access to diagnostic testing. A qualitative method was used from a potential user's perspective. The needs and future needs for, facilitators of, and barriers to the use of Directlab Online were evaluated. Semistructured focus group meetings were conducted in 2022. Two focus groups were focused on sexually transmitted infection test packages and 2 were focused on prevention test packages. Data analysis was performed according to the principles of the Framework Method. The Consolidated Framework for Implementation Research was used to categorize the facilitators and barriers. In total, 19 participants, with a mean age of 34.32 (SD 14.70) years, participated in the focus groups. Important barriers were a lack of privacy information, too much and difficult information, and a commercial appearance. Important facilitators were the right amount of information, the right kind of tests, and the involvement of a health care professional. The need for a service such as Directlab Online was to ensure its availability for users' health and to maintain their health. According to the participants, facilitators and barriers were comprehension of the information, the goal of the website, and the overall appearance of the service. Although the service was developed in cocreation with health care professionals and users, the needs did not align. The users preferred understandable and adequate, but not excessive, information. In addition, they preferred other types of tests to be available on the service. For future research, it would be beneficial to focus on cocreation between the involved medical professionals and users to develop, improve, and implement a service such as Directlab Online.