Distinct Facies Research Articles

A new lithostratigraphic framework and unified nomenclature for the Nsuze Group of the Nkandla sub-basin, southern Kaapvaal Craton, South Africa

AbstractDuring the early 20th century the term Insuzi Series, later reclassified as the Nsuze Group of the Pongola Supergroup, was proposed for a volcano-sedimentary succession exposed in the upper Nsuze River valley in central KwaZulu-Natal, South Africa. Subsequently, however, there has been little consensus on lithostratigraphic frameworks within the type area, and limited correlation with the exceptionally well-defined stratigraphy within the main Pongola basin. Recent mapping, combined with newly acquired high-resolution aeromagnetic data, satellite imagery, and available published geochronological data suggest that previously published schemes within the Nkandla sub-basin require revision. Utilising important regional marker units, as well as the stratigraphic positions of distinct sedimentary facies within the otherwise volcanic Nsuze Group, a working model is proposed. Lithostratigraphic units are well represented in the Mhlatuze and Nkandla inliers with examples from these areas given prominence. Where exposed, potential correlates within the Nsuze nappe complex are discussed. Within the proposed scheme the siliciclastic Mantonga Formation forms the base of the Nsuze Group, nonconformably overlying basement granitoids of the Kaapvaal Craton within the Mhaltuze Inlier. Mafic volcanics of the Nhlebela Formation overlie the Mantonga Formation in the inlier. These two lower units are, however, not exposed elsewhere in the sub-basin. The sedimentary White Mfolozi Formation forms the base of the succession in the Nkandla Inlier. Diamictites and stromatolite-bearing carbonate lithologies unique to this unit are utilised for regional third-order correlations with the type-area in the White Mfolozi Inlier. Mafic volcanics of the Agatha Formation overlie the White Mfolozi Formation in all exposures, but are most extensively developed within the Mdlelanga syncline of the Nkandla Inlier. Sedimentary and volcaniclastic lithologies of the Mkuzane Formation cap the Nsuze Group in the Mhlatuze and Nkandla inliers. Thickness of this formation is, however, highly variable having been subjected to pre-Vutshini Formation erosion. Through detailed reinterpretation of the stratigraphy of the Nkandla sub-basin we present a third order, (formation) scale, lithostratigraphic scheme encompassing all the formational units of the currently accepted stratigraphy within the main Pongola basin. This working model has the potential for lower-ranking units to be identified and be placed at their appropriate stratigraphic levels in future.

First Report of Two Egyptian Patients with Desbuquois Dysplasia due to Homozygous CANT1 Mutations

Desbuquois dysplasia type 1 (DBQD1) is a very rare skeletal dysplasia characterized by growth retardation, short stature, distinct hand features, and a characteristic radiological monkey wrench appearance at the proximal femur. We report on 2unrelated Egyptian patients having the characteristic features of DBQD1 with different expressivity. Patient 1 presented at the age of 45 days with respiratory distress, short limbs, faltering growth, and distinctive facies while patient 2 presented at 5 years of age with short stature and hypospadias. The 2 patients shared radiological features suggestive of DBQD1. Whole-exome sequencing revealed a homozygous frameshift mutation in the CANT1 gene (NM_001159772.1:c.277_278delCT; p.Leu93ValfsTer89) in patient 1 and a homozygous missense mutation (NM_138793.4:c.898C>T; p.Arg300Cys) in patient 2. Phenotypic variability and variable expressivity of DBQD was evident in our patients. Hypoplastic scrotum and hypospadias were additional unreported associated findings, thus expanding the phenotypic spectrum of the disorder. We reviewed the main features of skeletal dysplasias exhibiting similar radiological manifestations for differential diagnosis. We suggest that the variable severity in both patients could be due to the nature of the CANT1 gene mutations which necessitates the molecular study of more cases for phenotype-genotype correlations.

Sedimentary facies, stratigraphy, and depositional environments of the Ecca Group, Karoo Supergroup in the Eastern Cape Province of South Africa

Abstract The stratigraphy of the Ecca Group has been subdivided into the Prince Albert, Whitehill, Collingham, Ripon, and Fort Brown Formations in the Eastern Cape Province, South Africa. In this article, we present detailed stratigraphic and facies analyses of borehole data and road-cut exposures of the Ecca Group along regional roads R67 (Ecca Pass), R344 (Grahamstown-Adelaide), R350 (Kirkwood-Somerset East), and national roads N2 (Grahamstown-Peddie) and N10 (Paterson-Cookhouse). Facies analysis of the Ecca Group in the study area was performed to deduce their depositional environments. Based on the lithological and facies characteristics, the stratigraphy of the Prince Albert, Whitehill, Collingham, and Fort Brown Formations is now subdivided into two informal members each, while the Ripon Formation is subdivided into three members. A total of twelve lithofacies were identified in the Ecca Group and were further grouped into seven distinct facies associations (FAs), namely: Laminated to thin-bedded black-greyish shale and mudstones (FA 1); Laminated black-greyish shale and interbedded chert (FA 2); Mudstone rhythmite and thin beds of tuff alternation (FA 3); Thin to thick-bedded sandstone and mudstone intercalation (FA 4); Medium to thick-bedded dark-grey shale (FA 5); Alternated thin to medium-bedded sandstone and mudstone (FA 6); and Varved mudstone rhythmite and sandstone intercalation (FA 7). The FAs revealed gradually change of sea-level from deep marine (FA 1, FA 2, FA 3 and FA 4, FA 5, and FA 6) to prodelta environment (FA 7). This implies that the main Karoo Basin was gradually filling up with Ecca sediments, resulting in the gradual shallowing up of the water depth of the depositional basin.

Active microbial ecosystem in glacier basal ice fuelled by iron and silicate comminution-derived hydrogen.

The basal zone of glaciers is characterized by physicochemical properties that are distinct from firnified ice due to strong interactions with underlying substrate and bedrock. Basal ice (BI) ecology and the roles that the microbiota play in biogeochemical cycling, weathering, and proglacial soil formation remain poorly described. We report on basal ice geochemistry, bacterial diversity (16S rRNA gene phylogeny), and inferred ecological roles at three temperate Icelandic glaciers. We sampled three physically distinct basal ice facies (stratified, dispersed, and debris bands) and found facies dependent on biological similarities and differences; basal ice character is therefore an important sampling consideration in future studies. Based on a high abundance of silicates and Fe‐containing minerals and, compared to earlier BI literature, total C was detected that could sustain the basal ice ecosystem. It was hypothesized that C‐fixing chemolithotrophic bacteria, especially Fe‐oxidisers and hydrogenotrophs, mutualistically support associated heterotrophic communities. Basal ice‐derived rRNA gene sequences corresponding to genera known to harbor hydrogenotrophic methanogens suggest that silicate comminution‐derived hydrogen can also be utilized for methanogenesis. PICRUSt‐predicted metabolism suggests that methane metabolism and C‐fixation pathways could be highly relevant in BI, indicating the importance of these metabolic routes. The nutrients and microbial communities release from melting basal ice may play an important role in promoting pioneering communities establishment and soil development in deglaciating forelands.

Re-examining models of shallow-water deltas: Insights from tank experiments and field examples

Shallow-water deltas remain enigmatic in terms of placing the observed facies within a coherent process-based depositional model. Here we report tank experiments on mouth-bar formation from shallow water pure and stratified jets that, combined with recent flume experiments on bedforms, suggest new interpretations of field observations from shallow-water delta outcrops.Our experiments imply that the height, geometry and bedforms of the mouth bars depend on the jet properties and grain size of the supplied sediment. Pure jets with very coarse-grained sediment formed a high and steep mouth bar that is characterised by steep angle-of-repose cross bedding with related avalanche processes (grain flows) on the lee side. The experiments with stratified jets imply that mouth-bar deposition and growth are dominated by supercritical density flows that evolve from the initial jets on the lee side of the growing mouth bar. In stratified jets with very coarse-grained sediment, deposition on the mouth-bar lee side was both from grain-flow avalanches and density flows. While deposition on the upper lee slope was dominated by grain flows, a concentric field of low relief, asymmetric, downflow-migrating bedforms evolved on the lower slope and beyond the mouth bar. In the stratified jet with medium-grained sediment a very low relief mouth bar formed within a concentric field of low, asymmetric, downflow-migrating bedforms covering the entire lee slope and the area beyond.Many previous field studies show that mouth bars deposited from dense stratified jets (hyperpycnal flows) are characterised by a distinct facies assemblage of coarse-grained cross-stratified or low-angle cross-stratified sandstone passing downslope into finer-grained plane-parallel, or “quasi-parallel” laminated sand and into climbing-ripple cross-laminated sandstone. Comparison to flume and tank experiments suggests that the proximal coarse-grained planar and trough cross-stratified sandstones could represent deposition by supercritical dunes that pass downslope into antidunes, characterised by sinusoidal stratification and/or low-angle cross stratification. The repeated vertical transition between antidune deposits and climbing-ripple cross-laminated sandstone may indicate the superposition of ripples onto antidunes in finer-grained sediments, indicating ripple formation under supercritical flow conditions. Similar bedforms/sedimentary structures have previously been interpreted as hummocky cross-stratification or swaley cross-stratification and attributed to combined flows in storm-dominated settings, which probably in some cases must be revised.

A budding yeast model for human disease mutations in the EXOSC2 cap subunit of the RNA exosome complex.

RNA exosomopathies, a growing family of diseases, are linked to missense mutations in genes encoding structural subunits of the evolutionarily conserved, 10-subunit exoribonuclease complex, the RNA exosome. This complex consists of a three-subunit cap, a six-subunit, barrel-shaped core, and a catalytic base subunit. While a number of mutations in RNA exosome genes cause pontocerebellar hypoplasia, mutations in the cap subunit gene EXOSC2 cause an apparently distinct clinical presentation that has been defined as a novel syndrome SHRF (short stature, hearing loss, retinitis pigmentosa, and distinctive facies). We generated the first in vivo model of the SHRF pathogenic amino acid substitutions using budding yeast by modeling pathogenic EXOSC2 missense mutations (p.Gly30Val and p.Gly198Asp) in the orthologous S. cerevisiae gene RRP4. The resulting rrp4 mutant cells show defects in cell growth and RNA exosome function. Consistent with altered RNA exosome function, we detect significant transcriptomic changes in both coding and noncoding RNAs in rrp4-G226D cells that model EXOSC2 p.Gly198Asp, suggesting defects in nuclear surveillance. Biochemical and genetic analyses suggest that the Rrp4 G226D variant subunit shows impaired interactions with key RNA exosome cofactors that modulate the function of the complex. These results provide the first in vivo evidence that pathogenic missense mutations present in EXOSC2 impair the function of the RNA exosome. This study also sets the stage to compare exosomopathy models to understand how defects in RNA exosome function underlie distinct pathologies.

Cross‐Scale Seismic Anisotropy Analysis in Metamorphic Rocks From the COSC‐1 Borehole in the Scandinavian Caledonides

AbstractMetamorphic and deformed rocks in thrust zones show particularly high seismic anisotropy causing challenges for seismic imaging and interpretation. A good example is the Seve Nappe Complex in central Sweden, an old exhumed orogenic thrust zone that is characterized by a strong but incoherent seismic reflectivity and considerable seismic anisotropy. However, only little is known about their origin in relation to composition and structural influences on measurements at different seismic scales. Here, we present a new integrative study of cross‐scale seismic anisotropy analyses combining mineralogical composition, microstructural analyses, and seismic laboratory experiments from the COSC‐1 borehole, which sampled a 2.5‐km‐deep section of metamorphic rocks deformed in an orogenic root now preserved in the Lower Seve Nappe. While there is strong crystallographic preferred orientation in most samples in general, variations in anisotropy depend mostly on bulk mineral composition and dominant core lithology as shown by a strong correlation between these. This relationship enables to identify three distinct seismic anisotropy facies providing a continuous anisotropy profile along the borehole. Moreover, comparison of laboratory seismic measurements and electron‐backscatter diffraction data reveals a strong scale dependence, which is more pronounced in the highly deformed, heterogeneous samples. This highlights the need for comprehensive cross‐validation of microscale anisotropy analyses with additional lithological data when integrating seismic anisotropy over seismic scales.

Characterization of rhodolith beds-related backscatter facies from the western Pontine Archipelago (Mediterranean Sea)

Rhodoliths (nodular calcareous red algae) are considered one of the most important bioengineers in the Mediterranean Sea, making rhodolith beds ecologically relevant ecosystems. On the insular shelf surrounding the western Pontine Archipelago (depth from 43 to 112 m), rhodolith beds were identified through the analysis of an extensive dataset of grab samples and videos to ground-truth the backscatter acoustic facies. Six acoustic facies (low backscatter, dishomogeneous low-backscatter, dishomogeneous high-backscatter, high-backscatter, rocks and high backscatter, and rocks and medium backscatter) were recognized. We studied how rhodoliths characteristics (density, morphotype, size and structure) differently influence the backscatter signature. At the western Pontine Archipelago, rhodolith beds are mainly represented by facies dishomogeneous high backscatter, high backscatter, high backscatter with rocks, and medium backscatter with rocks. The obtained results increase both the knowledge on the heterogeneous structure of such ecologically relevant benthic habitat and highlight the use of distinctive acoustic facies for their identification. Finally, the used approach could be considered a useful method for indirect detection and mapping of rhodolith beds.

From arc-continent collision to ocean closure: Lower Cretaceous Shamuluo Formation in the western segment of the Bangong–Nujiang suture zone, central Tibet

One of most hotly debated topics concerning the Late Mesozoic evolution of Tethyan and the Tibetan Plateau is the timing of the closure of the Meso-Tethys ocean, which is represented by the Bangong–Nujiang suture zone. The Upper Jurassic–Lower Cretaceous Shamuluo Formation, which unconformably overlies the older Mugagangri Group accretionary complex, provides important information on the closure of the Meso-Tethys Ocean. This paper precisely confines the depositional age of the Shamuluo Formation in the western segment of the Bangong–Nujiang suture zone, extending it from the Late Jurassic to the Albian. Combined with the results of previous studies, we suggest that the Shamuluo Formation in the Awengco–Baerqiong region mainly contains a bathyal Berriasian–Hauterivian subunit and a shallow-marine Albian subunit. Provenance analysis indicates that the Berriasian–Hauterivian subunit was mainly derived from the Jurassic southern Qiangtang magmatic arc, while the Albian subunit was derived from the coeval volcanic rocks and the Upper Carboniferous–Upper Permian strata in the southern Qiangtang terrane. Thus, the two subunits of the Shamuluo Formation have significant distinct sedimentary facies and provenances, indicating that they were deposited in different tectonic settings. Based on the regional geological data, we suggest that the bathyal Berriasian–Hauterivian subunit and the shallow-marine Albian subunit of the Shamuluo Formation should be interpreted as a record of the oceanic arc-continent collision and the Lhasa–Qiangtang soft-collision, respectively. Thus, the closure time of the Meso-Tethys Ocean is at least limited to the Albian.

A large and erected sponge assemblage on granite outcrops in a Mediterranean Marine Protected Area (NE Sardinia)

Coralligenous reefs represent one of the key ecosystems of the Mediterranean Sea in terms of both species richness and habitat heterogeneity. Their main characteristic is the massive development of crustose macroalgae, the corallines, which form a bio-constructed basal layer. However, when growing on granitic substrates, these algae show a lower capacity to build thick concretions than those present on limestone. Assemblages developing on isolated granitic outcrops were investigated by scuba diving at 73 sites down to a depth of 56 m within the Tavolara-Punta Coda Cavallo Marine Protected Area (NE Sardinia, Mediterranean Sea). These outcrops were characterised by a scarce development of crustose corallines, due to the widespread presence of the brown algae Carpomitra costata and, to a lesser extent, Cystoseira zosteroides. Animal dominance increased with depth, mainly by sponges, in particular Axinella spp. and several species of Keratosa (Dysidea spp., Sarcotragus foetidus, Spongia lamella and S. officinalis). Gorgonians, which typically characterise the upper layer of coralligenous assemblages, were scarcely represented: Eunicella cavolini and E. verrucosa were generally rare, E. singularis was widespread, while Paramuricea clavata was comparatively frequent only at depth. All these features determined a peculiar community that was markedly different from the coralligenous assemblages occurring on neighbouring limestone rocks. Such a community, clearly characterised by the dearth of the typical biogenic hard substrate made by coralline algae, uneven distribution of gorgonians and, especially, the dominance of large and erect sponges, constitutes a distinctive facies of Mediterranean circalittoral communities worthy of conservation.

Palynofacies as a palaeoenvironment and hydrocarbon source potential assessment tool: An example from the Cretaceous of north Western Desert, Egypt

Optical examination employing transmitted light and UV-fluorescence microscopy of palynological preparations of eighteen cutting samples representing the Alam El Bueib Member (Hautervian-Barremian), Kharita/lower Bahariya (Cenomanian), and Abu Roash (Turonian-Santonian) formations collected from the Faghur Hj5-1 well, north Western Desert, Egypt, allows the identification of three different palynological assemblages from the studied rock units. These assemblages are mainly non-marine but apparently marine at the base of the Alam El Bueib Member, as evidenced by dinocyst occurrence. In addition, the presence of the Pediastrum and chlorophycean algae ecozone, recognised in previous works, is a good datum for the Abu Roash Formation in the north Western Desert of Egypt. Three associations of palynofacies linked to lithofacies changes are recognised and employed in identification of depositional environments. The Alam El Bueib samples yielded mixed kerogen assemblages of non-marine and marine organic facies. The Kharita/lower Bahariya interval is mostly barren, possibly due to prevailing sandstone lithofacies, except for one sample at its upper part which contains a diverse palynological assemblage. The overlying Abu Roash Formation has a homogeneous kerogen composition comprising mainly granular fluorescent AOM and algae as well as rare palynomorphs. Qualitative as well as quantitative variations of palynofacies allow the reconstruction of the depositional environment. The obtained data have the potential for discriminating spatial and redox status differences and providing also information about terrestrial/freshwater influxes. Results support the model that the Alam El Bueib Member was deposited in a marginal dysoxic-anoxic to distal suboxic-anoxic basin. The Kharita/lower Bahariya unit in the studied well was deposited under marginal dysoxic-anoxic conditions whereas the overlying Abu Roash Formation in a distal suboxic-anoxic basin. Palynofacies results also show that the studied material comprises two distinct facies of kerogen. First, Type II > I kerogen (AOM-rich) is overwhelmingly dominant in the Abu Roash Formation and a few samples from the Alam El Bueib Member which are presumed highly oil-prone, whereas Type III kerogen (phytoclast-rich) is particularly common in the Alam El Bueib Member and Kharita/lower Bahariya unit which are considered gas-prone. Thermal maturity determinations obtained from colour changes of smooth-walled palynomorphs reveal that Alam El Bueib samples belong to immature to mature stages; however, Kharita/lower Bahariya and Abu Roash samples are within the immature phase.

Bi-allelic missense variant, p.Ser35Leu in EXOSC1 is associated with pontocerebellar hypoplasia.

RNA exosome is a highly conserved ribonuclease complex essential for RNA processing and degradation. Bi-allelic variants in exosome subunits EXOSC3, EXOSC8 and EXOSC9 have been reported to cause pontocerebellar hypoplasia type 1B, type 1C and type 1D, respectively, while those in EXOSC2 cause short stature, hearing loss, retinitis pigmentosa and distinctive facies. We ascertained an 8-months-old male with developmental delay, microcephaly, subtle dysmorphism and hypotonia. Pontocerebellar hypoplasia and delayed myelination were noted on neuroimaging. A similarly affected elder sibling succumbed at the age of 4-years 6-months. Chromosomal microarray returned normal results. Exome sequencing revealed a homozygous missense variant, c.104C > T p.(Ser35Leu) in EXOSC1 (NM_016046.5) as the possible candidate. In silico mutagenesis revealed loss of a polar contact with neighboring Leu37 residue. Quantitative real-time PCR indicated no appreciable differences in EXOSC1 transcript levels. Immunoblotting and blue native PAGE revealed reduction in the EXOSC1 protein levels and EXO9 complex in the proband, respectively. We herein report an individual with the bi-allelic variant c.104C>T p.(Ser35Leu) in EXOSC1 and clinical features of pontocerebellar hypoplasia type 1. Immunoblotting and blue native PAGE provide evidence for the pathogenicity of the variant. Thus, we propose EXOSC1 as a novel candidate gene for pontocerebellar hypoplasia.

The formation and implications of giant blocks and fluid escape structures in submarine lateral spreads

AbstractLateral spread and submarine creep are processes that occur near the headwalls of both terrestrial landslides and submarine mass‐transport complexes (MTCs). Both submarine creep and spread deposits may contain giant (km‐scale) coherent blocks, but their transport processes remain poorly constrained. Here we use seismic reflection data to determine the geometry, scale, and origin of a Late Miocene mass‐transport complex (MTC) located in the Kangaroo Syncline, offshore NW Australia. We show that this large remobilised mass of carbonate ooze is ca. 170–300 m thick and covers an area of at least 1,050 km2. The deposit is defined internally by two distinct seismic facies: (a) large, upward‐tapering blocks (210–300 m thick, 170–210 m wide and 800–1,200 m long) with negligible internal deformation, which decrease in height and spacing along the transport direction (identical, but in situ, seismic facies forms undeformed slope material immediately updip of the deposit headwall); and (b) troughs (160–260 m thick, 190–230 m wide and 800–1,200 m long) comprising moderately deformed strata, which contain ‘v’‐shaped, pipe‐like structures that extend upwards from the inferred basal shear surface to the top surface. The lack of deformation within the blocks, and their correlation to adjacent in situ deposits, suggests they underwent limited transport (ca. 50 m–70 m). The relatively high degree of deformation within the intervening troughs is attributed to the vertical expulsion of fluids and sediment during hydraulic failure of the sediment mass. We present a hydraulic failure model that invokes evacuation of the lower slope by a precursor MTC and which formed the space to trigger the lateral spread. Our study also provides new insights into the genesis and rheology of subaqueous lateral spreads. The genetic links identified between mass wasting and spatially focused fluid flow, as well as disturbing the deep seafloor, indicate that submarine landslides may also create important deep‐sea biodiversity hotspots.

How Ground Penetrating Radar helps to understand the Nhecolândia lakes landscape in the Brazilian Pantanal wetland

Abstract The Pantanal wetland is an active sedimentary basin representing a relevant depositional setting for alluvial sedimentation studies. However, sedimentation homogeneity and the lack of outcrops makes sedimentary analysis more difficult. The Lower Nhecolândia is located at the Southern edge of the Taquari river megafan, whose genetic origin has been disputed as fluvial or eolian deposition. GPR analysis was used to characterize the subsurface stratigraphy and understand the region’s geomorphic evolution. The 100 MHz GPR provided continuous good quality sections up to a depth of 8 m. Two continuous reflections are disconformities that bound three depositional sequences characterized by distinct radar facies. The lower facies presents an upper erosional truncation followed by reflections presenting ∼1.5 m deep channelized forms and concave-up low amplitude reflections. The intermediate facies (∼4 m thick) presents a base with erosional truncation followed by concave-upward forms, ∼10 m wide, 1–3 m deep, separated by 1–2 m, and offlapping geometry. The upper facies has a flat base and thickness of 2–4 m, with parallel reflections; it shows a strong correlation between the radar facies and the forms preserved in the landscape, suggesting that channelized fluvial streams did not form them. The results obtained indicate that GPR use in the Pantanal is an important method to elucidate its geologic evolution.

Jurassic evolution and the structure of the central part of the Pieniny Klippen Belt (Carpathians) in Poland – new insight from the Czertezik Succession type area

The Czertezik Succession of the Pieniny Klippen Belt in Poland is assigned herein to its type area of occurrence – the main Pieniny Range, between Zamkowa Góra and Czertezik mounts. The reworked deposits of uppermost Pliensbachian, Toarcian and possibly Aalenian to lowermost Bajocian discovered in crinoidal limestones which indicate redeposition processes, especially during the Bajocian, are considered to be clearly important for reconstructing the depositional history. The redeposited Pliensbachian is represented by clasts of spotty limestones, the Toarcian by ferruginous grains and fragments of crusts/large oncoids of the ammonitico-rosso type (?Adnet Fm.), whereas the Aalenian and lowermost Bajocian is possibly represented by clasts of siliciclastic deposits and phosphatic nodules. This part of the succession resulted from the activity of rifting phases at the end of the Early Jurassic, and in the Bajocian, which caused the development of the special sedimentary environments typical of the Czertezik Succession. The younger Middle to Late Jurassic deposits represented by nodular limestones, radiolarites and micritic well-bedded limestones show a less distinct facies pattern, which is in part similar to that of other successions of the Pieniny Klippen Belt, although some rock-units such as the newly established Zamkowa Góra Bed, revealing the continuation of redeposition processes, remain specific to the Czertezik Succession. The Jurassic structure of the central part of the Pieniny Klippen Belt in Poland is revised due to the introduction of the Czertezik Ridge as a new palaeogeographic unit being the place of deposition of the Czertezik Succession. The revised position of the deposits shifts the structural affinity of the Czertezik Succession from the Subpieniny Nappe to the base of the Pieniny Nappe sensu Uhlig, 1907, and implies its closer palaeogeographic position to the Branisko–Pieniny successions than to the Czorsztyn–Niedzica successions as has been interpreted so far.

Acid Mine Drainage as Energizing Microbial Niches for the Formation of Iron Stromatolites: The Tintillo River in Southwest Spain.

The Iberian Pyrite Belt in southwest Spain hosts some of the largest and diverse extreme acidic environments with textural variation across rapidly changing biogeochemical gradients at multiple scales. After almost three decades of studies, mostly focused on molecular evolution and metagenomics, there is an increasing awareness of the multidisciplinary potential of these types of settings, especially for astrobiology. Since modern automatized exploration on extraterrestrial surfaces is essentially based on the morphological recognition of biosignatures, a macroscopic characterization of such sedimentary extreme environments and how they look is crucial to identify life properties, but it is a perspective that most molecular approaches frequently miss. Although acid mine drainage (AMD) systems are toxic and contaminated, they offer at the same time the bioengineering tools for natural remediation strategies. This work presents a biosedimentological characterization of the clastic iron stromatolites in the Tintillo river. They occur as laminated terraced iron formations that are the most distinctive sedimentary facies at the Tintillo river, which is polluted by AMD. Iron stromatolites originate from fluvial abiotic factors that interact with biological zonation. The authigenic precipitation of schwertmannite and jarosite results from microbial-mineral interactions between mineral and organic matrices. The Tintillo iron stromatolites are composed of bacterial filaments and diatoms as Nitzschia aurariae, Pinnularia aljustrelica, Stauroneis kriegeri, and Fragilaria sp. Furthermore, the active biosorption and bioleaching of sulfur are suggested by the black and white coloration of microbial filaments inside stromatolites. AMD systems are hazardous due to physical, chemical, and biological agents, but they also provide biogeochemical sources with which to infer past geochemical conditions on Earth and inform exploration efforts on extraterrestrial surfaces in the future.

Natural gamma-ray spectroscopy (NGS) as a proxy for the distribution of clay minerals and bitumen in the Cretaceous McMurray Formation, Alberta, Canada

Detailed examination of the mineralogy of the Cretaceous McMurray Formation within a facies framework is used to assess the use of natural gamma-ray spectroscopy (NGS) and a pulsed neutron generator (PNG) tool in delineating variation in clay mineral and bitumen contents. Characterization of the mixed-layer (interstratified) clay phases in the McMurray Formation provides an improved understanding of clay interaction in bitumen processing and tailings settling behavior, important for mine planning and tailings remediation schemes. Mineral diversity in the McMurray Formation was determined on facies attributed samples using whole rock X-ray diffraction (XRD), cation exchange capacity (CEC) measurements, elemental analysis (XRF), clay size fraction (<2 µm) XRD analysis, reflected light microscopy, and cryogenic-scanning electron microscopy (cryo-SEM). Kaolinite was ubiquitous in the entire McMurray Formation with lower and middle McMurray Formation sediments also containing mixed-layered illite–smectite (I-S) with a low expandability≈ 20–30%. Upper McMurray Formation sediments by contrast had higher expandability (≈ 60–70%). In floodplain sediments of the lower McMurray Formation an additional clay mineral was quantified as a kaolinite-expandable mixed-layer (clay) mineral. The associated CEC values of this mineral are 10 times the baseline for the McMurray Formation. NGS spectra from cores showed that yields of potassium (K), uranium (U), and thorium (Th) had distinct facies associations, correlated with a clay mineral signature. The resultant indicator is capable of highlighting zones within an oil sands ore body that are empirically known, by industry, to process poorly through extraction plants. A bitumen indicator from the carbon yield derived from a PNG logging tool assesses bitumen content. NGS and PNG allow a full assessment of clay mineral (fines) and bitumen profiles, with the future prospect that these techniques could be used to assess ore and tailings behavior in near-real time.

Direct‐Push Color Logging Images Spatial Heterogeneity of Organic Carbon in Floodplain Sediments

AbstractIn soils and sediments, large amounts of total organic carbon (TOC) mark reducing conditions. As dark sediment colors are good predictors for high‐TOC zones, they indicate hot spots of biogeochemical turnover and microbial activity. Traditionally, obtaining the sediment color or TOC at depth requires costly core sampling, resulting in poor horizontal resolution and related uncertainty caused by interpolation. We suggest using a direct‐push tool for optical screening of the sediment color to acquire multiple high‐resolution vertical color profiles and demonstrate its applicability to a biogeochemical transition zone in floodplain sediments, dominated by tufa. We use Gaussian mixture models for a cluster analysis of 35 color logs in the International Commission on Illumination (CIE) L*a*b* color space to identify three colorfacies that differ in lithology and TOC content: a dark colorfacies that agrees well with peat layers, a gray colorfacies associated with clay, and a creamy‐brown facies made of autochthonous carbonate precipitates. We test different approaches either to infer the TOC content from color metrics, namely, the lightness and chroma, across all facies, or to identify TOC ranges for each colorfacies. Given the high variability in TOC due to organic carbon specks in the tufa, the latter approach appears more realistic. In our application we map the 3‐D distribution of organic matter in a floodplain in distinct facies over 20,000 m2 down to 12 m depth. While we relate the sediment color only to the TOC content, direct‐push color logging may also be used for in situ mapping of other biogeochemically relevant properties, such as the ferric‐iron content or sedimentary structure.

VERTEBRATE TAPHONOMY, PALEONTOLOGY, SEDIMENTOLOGY, AND PALYNOLOGY OF A FOSSILIFEROUS LATE DEVONIAN FLUVIAL SUCCESSION, CATSKILL FORMATION, NORTH-CENTRAL PENNSYLVANIA, USA

ABSTRACT The fluvial facies of the Catskill Formation record important ecological events that occurred during Late Devonian time. A well-exposed section between the towns of Blossburg and Covington, in north-central Pennsylvania, contains abundant macrofossils and sedimentary features, making it well-suited for linking Upper Devonian fossil occurrences with depositional environments and sedimentary processes. Strata consist of two distinct fluvial facies: floodplain lithofacies consist of mudrocks, with evidence of pedogenic overprinting and sharp-based sandstones interpreted as crevasse splays; channel-bar lithofacies consist of single- and multi-storied cross-stratified lenticular sandstone bodies interpreted as fluvial channel-bar complexes. Macrofossils occur in 22 discrete horizons spanning &amp;gt; 240 m of stratigraphic succession that include Archanodon bivalve shell impressions, two genera of “placoderms” (Bothriolepis, Phyllolepis), an unidentified acanthodian, and several taxa of sarcopterygian fishes, including lungfish (Dipnoi indet.), Holoptychius, Langlieria, and Sauripterus. Most vertebrate macrofossils are preserved as disarticulated, abraded plates, scales, and bone fragments in sandstone channel-bar deposits. Articulated, unabraded remains are preserved in proximal floodplain deposits. Miospores recovered from Catskill Formation fossil sites in the Blossburg-Covington section belong to the COR subzone of the VCo (Diducites versabilis-Grandispora cornuta) palynological zone, indicating deposition ca. 362 to 361.8 Ma during the late Famennian stage of the Late Devonian. Catskill Formation fluvial strata exposed tens of kilometers to the south and west yield latest Famennian palynomorphs. These broadly contemporaneous continental depositional environments supported Late Devonian vertebrate evolution, including the fin-to-limb transition in tetrapodomorphs, and the possible euryhalinity of vertebrates occupying marine-to-nonmarine transitional habitats.

Comparative Characterization of Petrophysical and Mechanical Properties of Siliciclastic Reservoir Rocks within a compressional structure of the Teapot Dome Oilfield, Wyoming, USA

Abstract Working with subsurface engineering problems in Hydrocarbon exploration as regard rock elastic and petrophysical properties necessitate accurate determination of in-situ physical properties. Several techniques have been adopted in correlating log-derived parameters with petrophysical and mechanical behavior of the rocks. However, limited field applications show there are no particular parameters and correlations that are generally acceptable due to the regional variation in geologic features (i.e., degree of mineralogy, texture, etc.). This study presents a method that assesses the disparity in petrophysical properties of oil and gas reservoir rocks in relation to their elastic/mechanical properties from 10 well-logs and 3D migrated seismic data. Two distinct facies were identified from seismic data after computing attributes. Reflection strength attribute of 2.5 and above depicts Bright spots within the central section of the field as clearly revealed by Variance and Chaos attributes. Formation properties calculated from logs were conformally gridded in consonance with the reflection patterns from the seismic data. The average Brittleness index (BI) of 0.52 corresponds to Young’s modulus (E) values of between 8 and 16 for the dense portion. This portion is the laminated, reasonably parallel, and undeformed part, flanked by the unlaminated and chaotic zones. From cross plots, the distinguished lower portion on the plot is the segment with higher sand of more than 50 %. This segment corresponds to the reservoir in this study as confirmed from the genetic algorithm neural network Acoustic impedance inversion process result. Similarly, the plot of Compressional velocity (Vp ) and Poisson’s ratio (ν), reveals the laminated sand value of not less than 0.32 of ν, and Vp of about 4.2 km/s. The average porosity is about 16 %, average water saturation is about 16 %, and average permeability is approximately 25 md. Rock properties trends in a unique pattern and showing fluctuation that confirms the compressive nature of the structure with corresponding petrophysical properties. This trend is sustained in permeability computed and suggests a significant gravity-assisted compaction trend and fluid movement. It gives a reasonable idea of the fluid movement interplay and mechanical property variation within the sequence and across the dome. This part probably has been subjected to fair compressional deformational forces initiated from outside the survey.