Ligand Dissociation Research Articles

Acetonitrile Ligand Photosubstitution in Ru(II) Complexes Directly from the 3MLCT State.

The excited states of the series [Ru(tpy)(L)(CH3CN)]n+ (1-11) (n = 1, 2) containing bidentate ligands L with varying electron-donating ability were characterized through Arrhenius analysis of the temperature dependence of their excited-state lifetimes. Complexes 1-11 undergo photoinduced CH3CN dissociation upon 450 nm irradiation with ligand exchange quantum yields that increase with the energy barrier to populating a dissociative triplet ligand field (3LF) state from the lowest-energy triplet metal-to-ligand charge transfer (3MLCT) excited state. Combined with DFT calculations, the data indicate that ligand photodissociation in 1-11 occurs directly from the 3MLCT state instead of a 3LF state. This finding is in contrast to the generally accepted mechanism for ligand photodissociation in Ru(II) complexes and indicates that alternative pathways for photoinduced ligand dissociation are available. These results can widely impact design principles for applications that require ligand photodissociation, such as photochemotherapy and photocatalysis, as well as for those where photosubstitution is undesirable, such as solar energy conversion.

Thyroid hormone activities of neutral and anionic hydroxylated polybrominated diphenyl ethers to thyroid receptor β: A molecular dynamics study

Hydroxylated polybrominated diphenyl ethers (OH-PBDEs) have been identified as the strong endocrine disrupting chemicals to humans, which show structural similarity with endogenous thyroid hormones (THs) and thus disrupt the functioning of THs through competitive binding with TH receptors (TRs). Although previous studies have reported the hormone activities of some OH-PBDEs on TH receptor β (TRβ), the interaction mechanism remains unclear. Furthermore, hydroxyl dissociation of OH-PBDEs may alter their TR disrupting activities, which has not yet been investigated in depth. In this work, we selected 18 OH-PBDEs with neutral and anionic forms and performed molecular dynamics (MD) simulations to estimate their binding interactions with the ligand binding domain (LBD) of TRβ. The results demonstrate that most of OH-PBDEs have stronger binding affinities to TRβ-LBD than their anionic counterparts, and the hydroxyl dissociation of ligands differentiate the major driving force for their binding. More Br atoms in OH-PBDEs can result in stronger binding potential with TRβ-LBD. Moreover, 5 hydrophobic residues, including Met313, Leu330, Ile276, Leu346, and Phe272, are identified to have important contributions to bind OH-PBDEs. These results clarify the binding mechanism of OH(O−)-PBDEs to TRβ-LBD at the molecular level, which can provide a solid theoretical basis for accurate assessment of TH disrupting effects of these chemicals.

Origin of Decomposition in a Family of Molybdenum Precursor Compounds.

The bis(tert-butylimido)-molybdenum(VI) framework has been used successfully in the design of vapor-phase precursors for molybdenum-containing thin films, so understanding its thermal behavior is important for such applications. Here, we report the thermal decomposition mechanism for a series of volatile bis(alkylimido)-dichloromolybdenum(VI) adducts with neutral N,N'-chelating ligands, to probe the stability and decomposition pathways for these molecules. The alkyl groups explored were tert-butyl, tert-pentyl, 1-adamantyl, and a cyclic imido (from 2,5-dimethylhexane-2,5-diamine). We also report the synthesis of the new tert-octyl imido adducts, (tOctN)2MoCl2·L (L = N,N,N',N'-tetramethylethylenediamine or 2,2'-bipyridine), which have been fully characterized by spectroscopic techniques as well as single-crystal X-ray diffraction and thermal analysis. We found that the decomposition of all compounds follows the same general pathway, proceeding first by the dissociation of the chelating ligand to give the coordinatively unsaturated species (RN)2MoCl2. Subsequent dimerization results in either an imido bridged adduct, [(RN)Mo(μ-NR)Cl2]2, or a chloride bridged adduct, [(RN)2Mo(μ-Cl)Cl]2, depending on the size of the R group. The dimeric species then likely undergoes an intramolecular γ-hydrogen transfer to yield a nitrido-amido adduct, (RHN)MoNCl2, and an alkene. Ultimately, the resulting molybdenum species appears to decompose into free tert-alkylamine and Mo2N or Mo2C. The thermolysis reactions have been monitored using 1H NMR spectroscopy, and the volatile decomposition products were analyzed using gas chromatography-mass spectrometry. A key intermediate has also been detected using electron ionization high-resolution mass spectrometry. Finally, a detailed computational investigation supports the mechanism outlined above and helps explain the relative stabilities of different N,N'-chelated bis(alkylimido)-dichloromolybdenum(VI) adducts.

Long-Term Stability of Ferri/Ferrocyanide As an Electroactive Component for Redox Flow Battery Applications: On the Origin of Apparent Capacity Fade

The attraction of aqueous organic redox flow batteries (AORFBs) lies in the potential for low mass-production cost and long lifetime of the organic molecules. To reach cell potentials >1.0 V, several AORFBs have employed the ferri/ferrocyanide redox couple as posolyte in alkaline conditions. Recent works have reported significant amounts of capacity fade of this redox couple at high pH, attributed either to chemical decomposition associated with cyanide ligand dissociation and irreversible hydroxylation of the iron complex [1,2], or due to cell unbalancing associated with electrochemical oxygen evolution reaction (OER) [3].We assess the chemical and electrochemical stability of ferri/ferrocyanide utilizing a volumetrically unbalanced, compositionally symmetric cell method [4]. A series of electrochemical and chemical characterization experiments was performed to distinguish between “real” capacity fade (redox-active is structurally damaged) and “apparent” capacity fade (redox-active remains structurally intact), when ferri/ferrocyanide electrolytes are used in the capacity-limiting side of a flow battery. Our results indicate that, in contrast with previous reports [1,2], no chemical decomposition of ferri/ferrocyanide occurs at tested pH values as high as 14 in the dark or in diffuse indoor light. Instead, an apparent capacity fade takes place due to an electroless reduction of ferricyanide to ferrocyanide, via electroless OER. We find that this parasitic process can be further enhanced by carbon electrodes, with apparent capacity fade rates at pH 14 increasing with an increased ratio of carbon electrode surface area to total amount of ferricyanide in solution. Based on these results, we report a set of operating conditions that enables the cycling of alkaline ferri/ferrocyanide electrolytes, and further demonstrate how apparent capacity fade rates can be engineered by the initial cell setup. If protected from direct exposure to light, the chemical stability of ferri/ferrocyanide anions allows for their practical deployment as electroactive species in long duration energy storage applications at alkaline pH values up to at least 14.

A High Potential, Low Capacity Fade Rate Iron Complex Posolyte for Aqueous Organic Flow Batteries

AbstractAn iron complex, tris(4,4′‐bis(hydroxymethyl)‐2,2′‐bipyridine) iron dichloride is reported, which operates at near‐neutral pH with a redox potential of 0.985 V versus SHE. This high potential compound is employed in the posolyte of an aqueous flow battery, paired with bis(3‐trimethylammonio)propyl viologen tetrachloride in the negolyte, exhibiting an open‐circuit voltage of 1.3 V at near‐neutral pH. It demonstrates excellent cycling performance with a low temporal capacity fade rate of 0.07% per day over 35 days of cycling. The extended cycling lifetime is the result of low permeability and improved structural stability of the newly developed iron complex compared to that of the iron tris(bipyridine) complex. The combination of high redox potential and low capacity fade rate compares favorably with those of all previously demonstrated organic and organometallic aqueous posolytes. Extensive investigation into the possible degradation mechanisms, including post‐mortem chemical and electrochemical analyses, indicates that stepwise ligand dissociations of the iron complex are responsible for the reported capacity loss during cell cycling. This investigation provides unprecedented insight to guide further improvements of such metalorganic compounds for energy storage and conversion applications.

Reaction of Thiosulfate Dehydrogenase with a Substrate Mimic Induces Dissociation of the Cysteine Heme Ligand Giving Insights into the Mechanism of Oxidative Catalysis.

Thiosulfate dehydrogenases are bacterial cytochromes that contribute to the oxidation of inorganic sulfur. The active sites of these enzymes contain low-spin c-type heme with Cys–/His axial ligation. However, the reduction potentials of these hemes are several hundred mV more negative than that of the thiosulfate/tetrathionate couple (Em, +198 mV), making it difficult to rationalize the thiosulfate oxidizing capability. Here, we describe the reaction of Campylobacter jejuni thiosulfate dehydrogenase (TsdA) with sulfite, an analogue of thiosulfate. The reaction leads to stoichiometric conversion of the active site Cys to cysteinyl sulfonate (Cα-CH2-S-SO3–) such that the protein exists in a form closely resembling a proposed intermediate in the pathway for thiosulfate oxidation that carries a cysteinyl thiosulfate (Cα-CH2-S-SSO3–). The active site heme in the stable sulfonated protein displays an Em approximately 200 mV more positive than the Cys–/His-ligated state. This can explain the thiosulfate oxidizing activity of the enzyme and allows us to propose a catalytic mechanism for thiosulfate oxidation. Substrate-driven release of the Cys heme ligand allows that side chain to provide the site of substrate binding and redox transformation; the neighboring heme then simply provides a site for electron relay to an appropriate partner. This chemistry is distinct from that displayed by the Cys-ligated hemes found in gas-sensing hemoproteins and in enzymes such as the cytochromes P450. Thus, a further class of thiolate-ligated hemes is proposed, as exemplified by the TsdA centers that have evolved to catalyze the controlled redox transformations of inorganic oxo anions of sulfur.

Milestoning simulation of ligand dissociation from the glycogen synthase kinase 3β.

As drug-binding kinetics has become an important factor to be considered in modern drug discovery, this work evaluated the ability of the Milestoning method in computing the absolute dissociation rate of a ligand from the serine-threonine kinase, glycogen synthase kinase 3β, which is a target for designing drugs to treat diseases such as neurodegenerative disorders and diabetes. We found that the Milestoning method gave good agreement with experiment with modest computational costs. Although the time scale for dissociation lasted tens of seconds, the collective molecular dynamics simulations total less than 1μs. Computing the committor function helped to identify the transition states (TSs), in which the ligand moved substantially away from the binding pocket. The glycine-rich loop with a serine residue attaching to its tips was found to undergo large movement from the bound to the TSs and might play a role in controlling drug-dissociation kinetics.

Distal Hydrophobic Loop Modulates the Copper Active Site and Reaction of AA13 Polysaccharide Monooxygenases.

Polysaccharide monooxygenases (PMOs) use a type-2 copper center to activate O2 for the selective hydroxylation of one of the two C-H bonds of glycosidic linkages. Our electron paramagnetic resonance (EPR) analysis and molecular dynamics (MD) simulations suggest the unprecedented dynamic roles of the loop containing the residue G89 (G89 loop) on the active site structure and reaction cycle of starch-active PMOs (AA13 PMOs). In the Cu(II) state, the G89 loop could switch between an "open" and "closed" conformation, which is associated with the binding and dissociation of an aqueous ligand in the distal site, respectively. The conformation of the G89 loop influences the positioning of the copper center on the preferred substrate of AA13 PMOs. The dissociation of the distal ligand results in the bending of the T-shaped core of the Cu(II) active site, which could help facilitate its reduction to the active Cu(I) state. In the Cu(I) state, the G89 loop is in the "closed" conformation with a confined copper center, which could allow for efficient O2 binding. In addition, the G89 loop remains in the "closed" conformation in the Cu(II)-superoxo intermediate, which could prevent off-pathway superoxide release via exchange with the distal aqueous ligand. Finally, at the end of the reaction cycle, aqueous ligand binding to the distal site could switch the G89 loop to the "open" conformation and facilitate product release.

Preparation, investigation, DFT, pH-metric and cyclic voltammetry of Cr(III), Fe(III), Co(II), Ni(II) and Cu(II) complexes derived from 2-(2-((2Z,3Z)-3-(hydroxyimino) butan-2-ylidene) hydrazineyl)-2-oxo-N-(pyridin-2-yl) acetamide (H3BYPA) and evaluation of their biological activity

Binuclear Cu(II), Co(II) and Ni(II) and mononuclear Fe(III) and Cr(III) complexes derived from new ligand, namely 2-(2-((2Z,3Z)-3-(hydroxyimino) butan-2-ylidene) hydrazineyl)-2-oxo-N-(pyridin-2-yl) acetamide (H3BYPA) have been prepared and identified by elemental analysis, magnetic measurements and spectral methods. The separated complexes appointed the general formula, [M2(HBYPA)(H2O)mCln].xH2O where M = Co(II) and Cu(II) and x = 0 and 3, respectively. IR data detected that the ligand behaves as monobasic NO bidentate in [Fe(H2BYPA)2Cl(H2O)].H2O complex. However, as dibasic tetradentate in [Cr(HBYPA)Cl(H2O)], [Co2(HBYPA)Cl2(H2O)2] and [Cu2(HBYPA)Cl2(H2O)2].3H2O complexes. Furthermore, H3BYPA behaves as tribasic pentadentate in the binuclear [Ni2(BYPA)Cl(H2O)4].4H2O complex,. pH-metric titration was accomplished in 50% water-dioxane mixture at 298, 318 and 328 K, respectively and the ligand's dissociation constant as well as the complexes’ stability constants were recorded. Also, the thermodynamic and kinetic parameters for the several thermal degradation phases of the complexes were calculated using the Horowitz–Metzger and Coats–Redfern approaches. The optical band gap values were compared to those produced by DFT and found to be equivalent. Moreover, antitumor and antibacterial activities of the compounds have been tested. Finally, the ligand and complexes docking study was utilized against HEPG-2 and MCF-7 by Schrödinger suite program using XP glide protocol.

Highly Luminescent Positively Charged Quantum Dots Interacting with Proteins and Cells†

Comprehensive SummaryWe have studied interactions between positively charged MUTAB‐stabilized quantum dots (QDs) and model proteins, serum and live cells using fluorescence correlation spectroscopy (FCS), dynamic light scattering (DLS), time‐resolved photoluminescence (PL) and live‐cell fluorescence imaging. Using human serum albumin (HSA) as a model protein, we measured the growth of a protein adsorption layer (“protein corona”) via time‐resolved FCS. Corona formation was characterized by an apparent equilibrium dissociation coefficient, KD ≈ 10 μM. HSA adlayer growth was surprisingly slow (timescale ca. 30 min), in stark contrast to many similar measurements with HSA and other proteins and different NPs. Time‐resolved PL data revealed a characteristic quenching behavior depending on the QD surface coverage with HSA. Taken together, we found that MUTAB‐QDs initially bind HSA molecules weakly (KD ≈ 700 μM); however, the affinity is enhanced over time, presumably due to proton injection into the MUTAB layer by HSA triggering ligand dissociation. This process was also observed with human blood serum, showing equal kinetics for comparable HSA concentration. Moreover, imaging experiments with cultured human cells (HeLa) revealed that MUTAB‐QDs bind to the cell membrane and perforate it. This process is reduced upon pre‐adsorption of proteins on the MUTAB‐QD surfaces.

Zn-Metal-Organic Framework Derived Ordered Mesoporous Carbon-Based Nanostructure for High-Performance and Universal Multivalent Metal Ion Storage.

Metal-organic framework (MOF) derivatives promise great potential in energy storage and conversion because of their excellent tunability in both the active metal sites, organic links, and the overall structures down to atomic and up to mesoscale. Nevertheless, a big challenge is to precisely control and thoroughly understand the actual MOF-to-derivative conversion process to realize the template-free synthesis of the MOF-derived ordered mesoporous materials. Here, a class of ordered mesoporous N-doped carbon nanoflakes is presented with slit-shaped pores synthesized by one-step pyrolysis of Zn1 Cux -MOF, where the Cu doping plays a critically important direction-inducing function on the dissociation of organic ligands during the pyrolysis. Benefiting from the uniquely ordered mesoporous structure and large specific surface area (910 m2 g-1 ), the Zn1 Cux -MOF-derived ordered mesoporous carbon nanoflakes present outstanding electrochemical storage performance for multivalent metal ions, such as Mg2+ , Ca2+ , Co2+ , Ni2+ , Al3+ , and Zn2+ , demonstrating the universal nature of the slit-shaped pores in enabling the multivalent metal ions for energy storage. Moreover, the assembled flexible Zn-ion hybrid supercapacitor (ZHSC) delivers a high specific capacity of 134 mAh g-1 at 0.5 A g-1 , excellent cycling and mechanical stability, showing great application potential in the new generation energy storage devices.

Making and breaking of chemical bonds in single nanoconfined molecules.

Nanoconfinement of catalytically active molecules is a powerful strategy to control their chemical activity; however, the atomic-scale mechanisms are challenging to identify. In the present study, the site-specific reactivity of a model rhenium catalyst is studied on the subnanometer scale for complexes confined within quasi–one-dimensional molecular chains on the Ag(001) surface by scanning tunneling microscopy. Injection of tunneling electrons causes ligand dissociation in single molecules. Unexpectedly, while half of the complexes show only the dissociation, the confined molecules show also the reverse reaction. On the basis of density functional theory calculations, this drastic difference can be attributed to the limited space in confinement. That is, the split-off ligand adsorbs closer to the molecule and the dissociation causes less structural disruption. Both of these facilitate the reverse reaction. We demonstrate formation and disruption of single chemical bonds of nanoconfined molecules with potential application in molecular data storage.

Simulation of ligand dissociation kinetics from the protein kinase PYK2.

Early-stage drug discovery projects often focus on equilibrium binding affinity to the target alongside selectivity and other pharmaceutical properties. The kinetics of drug binding are ignored but can have significant influence on drug efficacy. Therefore, increasing attention has been paid on evaluating drug-binding kinetics early in a drug discovery process. Simulating drug-binding kinetics at the atomic level is challenging for the long time scale involved. Here, we used the transition-based reweighting analysis method (TRAM) with the Markov state model to study the dissociation of a ligand from the protein kinase PYK2. TRAM combines biased and unbiased simulations to reduce computational costs. This work used the umbrella sampling technique for the biased simulations. Although using the potential of mean force from umbrella sampling simulations with the transition-state theory over-estimated the dissociation rate by three orders of magnitude, TRAM gave a dissociation rate within an order of magnitude of the experimental value.

Mechanical Stabilization of a Bacterial Adhesion Complex.

The adhesions between Gram-positive bacteria and their hosts are exposed to varying magnitudes of tensile forces. Here, using an ultrastable magnetic tweezer-based single-molecule approach, we show the catch-bond kinetics of the prototypical adhesion complex of SD-repeat protein G (SdrG) to a peptide from fibrinogen β (Fgβ) over a physiologically important force range from piconewton (pN) to tens of pN, which was not technologically accessible to previous studies. At 37 °C, the lifetime of the complex exponentially increases from seconds at several pN to ∼1000 s as the force reaches 30 pN, leading to mechanical stabilization of the adhesion. The dissociation transition pathway is determined as the unbinding of a critical β-strand peptide (“latch” strand of SdrG that secures the entire adhesion complex) away from its binding cleft, leading to the dissociation of the Fgβ ligand. Similar mechanical stabilization behavior is also observed in several homologous adhesions, suggesting the generality of catch-bond kinetics in such bacterial adhesions. We reason that such mechanical stabilization confers multiple advantages in the pathogenesis and adaptation of bacteria.

Reversible Oxidative Addition of Zinc Hydride at a Gallium(I)-Centre: Labile Mono- and Bis(hydridogallyl)zinc Complexes.

In the presence of TMEDA (N,N,N',N'-tetramethylethylenediamine), partially deaggregated zinc dihydride as hydrocarbon suspensions react with the gallium(I) compound [(BDI)Ga] (I, BDI={HC(C(CH3 )N(2,6-iPr2 -C6 H3 ))2 }- ) by formal oxidative addition of a Zn-H bond to the gallium(I) centre. Dissociation of the labile TMEDA ligand in the resulting complex [(BDI)Ga(H)-(H)Zn(tmeda)] (1) facilitates insertion of a second equiv. of I into the remaining Zn-H to form a thermally sensitive trinuclear species [{(BDI)Ga(H)}2 Zn] (2). Compound 1 exchanges with polymeric zinc dideuteride [ZnD2 ]n in the presence of TMEDA, and with compounds I and 2 via sequential and reversible ligand dissociation and gallium(I) insertion. Spectroscopic and computational studies demonstrate the reversibility of oxidative addition of each Zn-H bond to the gallium(I) centres.

Synthesis and crystal structures of rhodium acetate paddle‐wheel complexes with anchor group‐functionalised and hydrogen bond‐supported axial ligands

AbstractWe report the synthesis and X‐ray structures of four Rh2(OAc)4(LAx)2 (OAc=acetate, CH3COO−) paddle‐wheel complexes (C1−C4) with methylthio‐modified axial ligands LAx derived from benzamidine (L1), anilinopyrimidine (L2) or isothiourea (L3, L4) that are capable of forming N−H⋅⋅⋅O hydrogen bonds to the equatorially bridging acetate ligands. This was done with the aim to suppress dissociation of the axial ligands and to make the complexes amenable to single‐molecule conductance measurements in a scanning tunneling microscope break‐junction (STM‐BJ) setup. The characteristic spectroscopic features (NMR, IR, vis), crystal structures, the hydrogen‐bonding motifs and a DFT‐based screening of their frontier molecular orbitals are presented. Our calculations suggest that hydrogen‐bonding stabilises axial ligand binding by 15 kJ/mol to 30 kJ/mol and that the HOMO of the rhodium paddle‐wheels is closer to the Au work function than the LUMO, so that the rhodium paddle‐wheels are expected to constitute hole conductors.

G-Tetrad-Selective Ligand Binding Kinetics in G-Quadruplex DNA Probed with Fluorescence Correlation Spectroscopy.

Probing the kinetics of ligand binding to biomolecules is of paramount interest in biology and pharmacology. Measurements of such kinetic processes provide information on the rate-determining steps that control the binding affinity of ligands to biomolecules, thereby predicting the mechanism of the molecular interaction. In this context, ligand binding to G-quadruplex DNA (GqDNA) structures has attracted tremendous attention primarily because of their use in possible anticancer therapy. Although a large number of G-quadruplex-specific ligands have been proposed, probing the kinetics of G-tetrad-selective binding of (multiple) ligands within a G-quadruplex DNA (GqDNA) structure remains challenging. Most of the earlier studies focused on the thermodynamics of ligand binding; however, the kinetics of ligand association and dissociation with GqDNA, particularly binding of multiple ligands within a GqDNA structure, have not been explored. Here, we propose a simple fluorescence correlation spectroscopy-based method that measures the G-tetrad-selective association and dissociation rates of ligands within a GqDNA structure by correlating the fluorescence fluctuations of a site-specific (5' or 3' end-labeled) fluorophore (Cy3) in GqDNA due to quenching of Cy3 fluorescence, induced by the ligand binding to the G-tetrads. We show that well-known GqDNA ligands, BRACO19, TMPyP4, Hoechst 33258, and Hoechst 33342, have G-tetrad-selective association and dissociation rates, which suggest site-dependent variation of free energy barriers for binding/unbinding of the ligands with GqDNA. We also show that the measured kinetic rates depend not only on the G-tetrad site (5' vs 3' end) but also on the ligand and GqDNA structures.

Endogenous ligand recognition and structural transition of a human PTH receptor

Endogenous parathyroid hormone (PTH) and PTH-related peptide (PTHrP) bind to the parathyroid hormone receptor 1 (PTH1R) and activate the stimulatory G-protein (Gs) signaling pathway. Intriguingly, the two ligands have distinct signaling and physiological properties: PTH evokes prolonged Gs activation, whereas PTHrP evokes transient Gs activation with reduced bone-resorption effects. The distinct molecular actions are ascribed to the differences in ligand recognition and dissociation kinetics. Here, we report cryoelectron microscopic structures of six forms of the human PTH1R-Gs complex in the presence of PTH or PTHrP at resolutions of 2.8 -4.1Å. A comparison of the PTH-bound and PTHrP-bound structures reveals distinct ligand-receptor interactions underlying the ligand affinity and selectivity. Furthermore, five distinct PTH-bound structures, combined with computational analyses, provide insights into the unique and complex process of ligand dissociation from the receptor and shed light on the distinct durations of signaling induced by PTH and PTHrP.

Intrinsic affinity of protein – ligand binding by differential scanning calorimetry

Differential scanning calorimetry (DSC) determines the enthalpy change upon protein unfolding and the melting temperature of the protein. Performing DSC of a protein in the presence of increasing concentrations of specifically-binding ligand yields a series of curves that can be fit to obtain the protein–ligand dissociation constant as done in the fluorescence-based thermal shift assay (FTSA, ThermoFluor, DSF). The enthalpy of unfolding, as directly determined by DSC, helps improving the precision of the fit. If the ligand binding is linked to protonation reactions, the intrinsic binding constant can be determined by performing the affinity determination at a series of pH values. Here, the intrinsic, pH-independent, affinity of acetazolamide binding to carbonic anhydrase (CA) II was determined. A series of high-affinity ligands binding to CAIX, an anticancer drug target, and CAII showed recognition and selectivity for the anticancer isozyme. Performing the DSC experiment in buffers of highly different enthalpies of protonation enabled to observe the ligand unbinding-linked protonation reactions and estimate the intrinsic enthalpy of binding. The heat capacity of combined unfolding and unbinding was determined by varying the ligand concentrations. Taken together, these parameters provided a detailed thermodynamic picture of the linked ligand binding and protein unfolding process.

Half-Cell Flow Batteries: A Powerful Approach to Evaluating Cycling Stability of a Redox Active Electrolyte

Aqueous redox flow batteries (ARFBs) represent one promising energy storage technology for integration of renewable energy and balancing the electricity grids because of their technical merits of decoupled energy and power, sustainable and tunable redox active materials, and non-flammable and low cost aqueous supporting electrolytes. Despite numerous new flow battery chemistries reported in the last decade, the cycling life of ARFBs is still primarily limited by the chemical stability of redox active electrolytes. This presentation discusses the proper use and data interpretation of a half-cell flow battery to evaluate the cycling stability of a single redox active electrolyte. Specifically, the half-cell flow battery studies of K4[Fe(CN)6]/K3[Fe(CN)6] at alkaline conditions using balanced and unbalanced cell configurations will be discussed and compared. Our results reveal that the capacity loss of the K4[Fe(CN)6]/K3[Fe(CN)6] half-cell is attributed to cyanide ligand dissociation and then subsequent redox degradation. The reported half-cell flow battery methodology can be widely applied to develop new redox active electrolyte materials.