Single-walled carbon nanotubes (SWCNTs) were synthesized using the high-pressure carbon monoxide disproportionation process. The SWCNT diameter, diameter distribution and yield can be varied depending on the process parameters. Important parameters are the temperature, the pressure, the CO gas flow rate and the nozzle injection velocity and geometry for the injection of reactant gas into the reaction zone. Carbon nanotubes as small as 1.0 nm in diameter have been produced. The purity and yield of the deposited material were increased with increasing CO gas flow by means of rapid heating of the gas mixture and using an optimum injection profile. Highly pure SWCNTs were produced at 1250 K, pressures between 5 and 10 bar and gas in the turbulent flow regime in the cold line of 2000–2500 sccm CO. The raw materials were purified by oxidation in high vacuum at 523 K in wet Ar/20 vol. % O2 to remove SWCNT carbon-like impurities and to oxidize the iron catalyst nanoparticles. The iron oxides were removed by chemical treatment in concentrated HCl/C2H5OH mixture solution. The SWCNTs were analyzed by scanning electron microscopy, high-resolution transmission electron microscopy, atomic absorption spectroscopy and optical absorption spectroscopy to determine the purity, the diameter and diameter distribution, the chemical composition and the catalyst morphology, as well as the optical properties of deposited SWCNTs in dependence on the synthesis parameters.