Dispersive Analysis Research Articles

Comparying two methods of disparity analysis of the anterior portion of m1 in the gray voles (Rodentia, Arvicolini) in a model sample: frequency analysis of morphotypes and geometric morphometrics

An analysis of disparity of the anterior portion of m1 shape in the gray voles in an artificial sample consisting of 5 groups with different frequency distributions of 5 morphotypes was carried out. Two main approaches were applied: (a) traditional analysis of frequency distribution of discrete morphotypes and (b) geometric morphometrics (GM) based on a strictly quantitative description of the shape of anterior portion of m1. The groups were compared quantitatively: Cavalli-Sforz–Edwards’ coefficient was applied in the first case, while the thin plate spline and Procrustes analyses in the second; their results were analyzed using a number of standard statistical methods (dispersion analysis, discriminant analysis, multidimensional scaling). Disparity within the groups was assessed using Shannon entropy index and averaged Procrustes distance. Traditional and GM approaches were shown to provide very similar results, with GM having a number of important advantages by being strictly quantitative. The second approach is recommended as the basic to replace the traditional one for explorations in disparity of tooth crown shape in the voles.

Comparative analysis of the antimicrobial activity and dye degradation of metal oxides (TiO2, CdO, Mn2O3, and ZnO) nanoparticles using a green approach.

A tremendous amount of recent work has been done on different metal oxide nanomaterials for biological activities and photocatalytic dye degradation. This work used the Cissus quadrangularis leaf extract to prepare TiO2, CdO, Mn2O3, and ZnO nanoparticles using a green synthesis approach. To ascertain the physicochemical characteristics of the generated metal oxide nanoparticles, various characterisation techniques were used. The X-ray diffraction technique was used to determine the composition of the crystal and phase. Metal oxide nanoparticles have been proven to be present through surface morphological investigations using a scanning electron microscope and energy dispersive spectroscopy analysis. UV-Vis and Fourier transform infrared spectra were used for spectroscopic analysis. X-ray photoelectron spectroscopy can determine a material's elemental composition in addition to the electronicand chemicalstates of its atoms. The nanomaterial's distinct morphology, which resembles rods, rose petals, platelets, and spheres, was discovered by scanning electron microscope. Synthesized metal oxide nanoparticles have demonstrated a remarkable efficiency of 87.5-90.6% when utilized as a catalyst towards the removal of the malachite green dye under UV light irradiation. Additionally, we use the disc diffusion method to assess antibiotic efficacy against Bacillus subtilis, Candida tropicalis, and Escherichia coli. ZnO nanoparticles had the greatest zones of inhibition for 80 μL doses, measuring 26.99mm for Bacillus subtilis, 27.57mm for Escherichia coli, and 25.28mm for Candida tropicalis. The antimicrobial activity was strongly impacted by the size of the nanoparticles and increased with decreasing particle size. Overall, our research demonstrates that metal oxide nanoparticles are a promising photocatalytic agent for wastewater treatment and biological applications.

Wide band high gain modified-folded-wave-guide slow wave structure for millimeter-wave traveling wave tube amplifier in 6G and beyond back-haul communications

Abstract Millimeter-wave technology is crucial in telecommunications as it enables higher bandwidths and faster data transfer. V-band represents frequencies ranging from 50 to 75 GHz and is used for short-range back-haul communication, defense radar, inter-satellite communications, and space debris detection. Folded waveguide slow-wave structures (FWG-SWS) are an excellent choice for V-band amplifiers due to their wide bandwidths, large gain, and ease of fabrication using modern lithographic processes. This article presents a modified folded waveguide slow-wave structure (MFW-SWS) for V-band traveling wave tube amplifiers (TWTAs) desirable for multi-gigabit 6G and beyond back-haul communications. The MFW slow-wave structure is an FWG-SWS variant that supports an increased RF phase velocity, accommodating additional SWS length for much-improved amplification. The dispersion analysis effectively provides a 15% operational bandwidth ranging from 64–74 GHz with a reduced phase velocity of three-tenths the speed of light apt for enhanced beam-wave interactions. The two-section SWS has independent attenuators designed to provide over 20 dB attenuation throughout the functional bandwidth effortlessly. Additional wave-guide transitions are introduced to achieve the best attenuation characteristics. Along the axis of the SWS, a square beam tunnel is employed to support a 26 kV round electron beam with a beam current of 70 mA. To contain the electron beam within the beam tunnel, this study used a focusing mechanism with a constant magnetic field of 0.25T, which is highly appropriate for miniaturization and large-scale implementation in 6G back-haul towers. Particle-in-cell (PIC) simulations were performed using the CST (Computer Simulation Technology) Studio Suite, and a gain of over 26 dB with an output power of 50 W was successfully attained across the operational bandwidth.

Comprehensive evaluation of fertilizer treatments on biometric traits and marketable tuber weight across diverse potato varieties

IntroductionThe efficiency of potato production depends to a large extent on the production of quality seeds that meet the requirements of the growing region. The main component of this production includes breeding, which creates the genetic basis of seeds. The process of establishing patterns between the amount of fertilizer application (“Aquarin 12,” “Bona Forte,” “Osmocote Exact High K”), their type, and biometric characteristics of potato plants of the studied varieties “Guliver,” “Beauty of Meshchera,” and “Grand” was explored.MethodsDuring the experimental studies, the methods of variation statistics, the technique of field experiment with the corresponding transformations to achieve normal distribution, and subsequent dispersion analysis were used.ResultsThe results of the research on the evaluation of potato structural elements depending on the plant nutrition system of the studied varieties testify to the expediency of using nutrient solutions in potato cultivation irrespective of their type. In addition, it has been established that increasing the concentration of the nutrient base solution from 75 to 125% of the nutrient formula improves the quality indicators of minitubers, namely the content of starch, sugars, dry matter, crude protein, phosphorus, specific gravity, and ash content, which can contribute to obtaining high-quality potatoes.DiscussionThus, the use of morphological and physiological tools in closed ecosystems is informative for predicting key agricultural characteristics of potato plants. Additionally, integrating organic amendments and biofertilizers, as supported by other studies, could further enhance nutrient uptake and plant health, especially under conditions of low irrigation.

Theoretical Prediction of Crystal Structure of Mo2Ga2B and Its Evolution to Layered Boride Mo2B

Conventional Mn+1AXn phases are a large family of compounds that have been limited to carbides and nitrides. Herein, the stable structure of Mo2Ga2B, a typical boron‐based ternary phase in the Mo‐Ga‐B system, using a computational structure search approach is predicted. The predicted hexagonal‐layered structure is the typical structure of traditional Mn+1AXn phases, and two Ga layers separate Mo2B blocks in Mo2Ga2B, which is different from the M2AX phases. The analysis of phonon dispersions and elastic constants confirms that the hexagonal‐layered structure exhibits both dynamical and mechanical stability, respectively. The tensile and shear stress–strain curves are obtained, and the structural stability is investigated by analyzing the stability of chemical bonds under tensile and shear deformations. Layered Mo2B can be obtained by the removal of Ga layer from the precursor Mo2Ga2B. Theoretical predictions indicate that monolayer Mo2B is metallic, and has potential applications as an anode and thermoelectric material.

Factors increasing the hydroxycinnamic acids extraction from dandelion roots

Aim – to study the influence of extraction factors on the extraction of hydroxycinnamic acids (HCAs) from dandelion roots. Material and methods. The object of the study was air-dried dandelion roots. The HCAs content was determined using Arnov's reagent by spectrophotometric method according to the pharmacopoeial method. The influence of the nature, volume fraction of organic solvents, composition of extraction mixtures, temperature, duration, extraction frequency, medicinal plant raw material and extractant ratio, and medicinal plant raw material particle size on the HCAs yield from dandelion roots during extraction was established. Methanol, ethanol, propanol-1, propanol-2, acetone, acetonitrile, dimethyl sulfoxide, propylene glycol-1,2, ethylene glycol, glycerol and their aqueous solutions in volume fractions of 20, 40, 60 and 80 % were used as extractants. A dispersion analysis of the influence of these factors on the yield of HCAs during extraction was performed. Results. Extraction conditions providing the maximum yield of HCAs in comparison with pharmacopoeial and literary methods were experimentally developed. The conditions include: extractant – 60 % propanol-1 or a mixture of 50 % propanol-1 and 10 % acetone; extraction temperature – 80 ˚C; extraction duration – 6 hours; medicinal plant raw material and extractant ratio – 1 to 25; extraction frequency – single and medicinal plant raw material particle size – 500 μm or less. It has been proven that the physicochemical characteristics of the extractants, their volume fractions in solutions and extraction parameters have a statistically significant effect on the yield of HCAs. Conclusions. A statistically significant effect of the studied extraction factors on the yield of HCAs from dandelion roots has been proven. The developed extraction method statistically significantly increases the yield of HCAs by an average of 30% to 2.5 times in comparison with pharmacopoeial and literary extraction methods.

Mechanisms of nano zero-valent iron in enhancing dibenzofuran degradation by a Rhodococcus sp.: Trade-offs between ATP production and protection against reactive oxygen species.

Nano zero-valent iron (nZVI) can enhance pollutants biodegradation, but it displays toxicity towards microorganisms. Gram-positive (G+) bacteria exhibit greater resistance to nZVI than Gram-negative bacteria. However, mechanisms of nZVI accelerating pollutants degradation by G+ bacteria remain unclear. Herein, we explored effects of nZVI on a G+ bacterium, Rhodococcus sp. strain p52, and mechanisms by which nZVI accelerates biodegradation of dibenzofuran, a typical polycyclic aromatic compound. Electron microscopy and energy dispersive spectroscopy analysis revealed that nZVI could penetrate cell membranes, which caused damage and growth inhibition. nZVI promoted dibenzofuran biodegradation at certain concentrations, while higher concentration functioned later due to the delayed reactive oxygen species (ROS) mitigation. Transcriptomic analysis revealed that cells adopted response mechanisms to handle the elevated ROS induced by nZVI. ATP production was enhanced by accelerated dibenzofuran degradation, providing energy for protein synthesis related to antioxidant stress and damage repair. Meanwhile, electron transport chain (ETC) was adjusted to mitigate ROS accumulation, which involved downregulating expression of ETC complex I-related genes, as well as upregulating expression of the genes for the ROS-scavenging cytochrome bd complex and ETC complex II. These findings revealed the mechanisms underlying nZVI-enhanced biodegradation by G+ bacteria, offering insights into optimizing bioremediation strategies involving nZVI.

Synergistic effects of liquid phase sintering and B-site substitution to enhance proton conductivity of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ for protonic ceramic fuel cell

This paper is dedicated to improving the sintering and conductivity of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (BZCYYb) by adding ZnO-CuO dual-sintering aids. The synergistic effects of liquid-sintering of Zn and B-site substitution of Cu on the sinterability and proton conductivity of BZCYYb are systematically investigated. X-ray diffraction (XRD) analysis of BZCYYb after addition of ZnO-CuO (BZCYYb-Zn-Cu) confirms the complete perovskite phase formation without any secondary phase. The substitution of Ce4+ (0.87 Å) with Zn2+ (0.74 Å) or Cu2+ (0.73 Å) induces a shift in XRD diffraction peak to higher angle due to a decrease in lattice constant. Energy dispersive X-ray spectroscopy analysis indicate a distinct distribution of Zn primarily at the grain boundaries, while Cu is predominantly located within the grains of BZCYYb-Zn-Cu. The addition of ZnO-CuO into BZCYYb results in a denser microstructure with larger average grain size. Furthermore, the substitution of Ce4+ by Cu2+ increases the concentration of oxygen vacancies and reduces activation energy. For BZCYYb-Zn-Cu, the proton conductivity reaches 4.52×10-2 S/cm at 750 °C, approximately 3 times higher than that of BZCYYb. This enhancement can be attributed to the synergistic effects of larger average grain size resulting from liquid phase sintering of Zn, low active energy, and high concentration of oxygen vacancies arising from Cu B-site substitution. BZCYYb-Zn-Cu is used as the electrolyte for anode support SOFC, and the single cell exhibits remarkable electrochemical performance and excellent stability in H2 fuel. This research establishes a crucial theoretical foundation for the preparation and performance evaluation for large-size protonic ceramic cell.

Improved mechanical and microscopic properties of ultra-high-performance concrete with the addition of hybrid alkali-resistant glass fibers

Ultra-high-performance fiber-reinforced concrete (UHPFRC), wherein steel fibers are a primary component, is a new cementitious material with high tensile strength and impact resistance. However, steel fibers are susceptible to corrosion in the alkaline environment of concrete matrices. By contrast, alkali-resistant glass fiber (ARGF) exhibits better corrosion resistance. However, few studies have explored the effects of ARGF on UHPFRC, leaving the optimum ARGF content and its enhancement mechanism unclear. Therefore, this study proposes a UHPFRC design that utilizes AR-GF in place of steel fibers. The effects of different types, lengths, and admixtures of AR-GF are investigated using mechanical tests, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The results show that the splitting tensile strength and flexural strength of the UHPFRC increase with fiber length and fiber dosage. The optimum fiber mixing ratio is 30 kg/m3 of 12 mm-long Anti-Crak® 62.4 combined with 0.05 kg/m3 of 6 mm long Anti-Crak® HD, leading to a 23.3 % increase in splitting tensile strength and 15.8 % increase in flexural strength compared to those of undoped concrete. By analyzing the ARGF dispersion pattern at the fracture surface of the flexural test, the ARGF dispersion analysis method was proposed. SEM shows that the ARGF is coated with C-S-H, which increases its adhesion to the concrete matrix. XRD confirms that ARGF does not affect the hydration reaction of the cement in the UHPFRC. Finally, a model of ARGF-reinforced UHPFRC is established to elucidate the reinforcing mechanism. This study provides guidance and a reference for the application of UHPFRC in engineering projects.

Boronize Coatings Studied with a New Mass Transfer Model.

This study examined the development of Fe2B (diiron boronize) coatings on the surface of 35NiCrMo4 steel through the thermochemical surface hardening process called boronizing. The morphology and thickness of the boronize coatings were assessed using Scanning Electron Microscopy (SEM) and optical microscopy (OM). A novel mathematical mass transfer model was developed to estimate the diffusion coefficients of boron in hard coating. The presence of uniformly distributed boronize coatings with a typical sawtooth pattern on the surface of the substrate was confirmed. The boronize coating's chemical composition and phase constituents were analyzed utilizing X-ray energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The study confirmed the presence of a single-phase boronize coating (Fe2B). Furthermore, microhardness tests indicated that the boronized specimen's surface demonstrated an average hardness of approximately 1953 HV. The wear study were conducted using the pin-on-disk method under dry debonding conditions at room temperature to estimate the coefficient of friction (COF) of the boronized (average ≈ 0.35) and untreated (0.725) specimens. The results revealed approximately 200% improvement in wear resistance due to the boronized coating. The empirical validation of the mathematical model was carried out for two additional boronizing conditions at 1223 K for 3 h and 1273 K for 1.5 h, resulting in an estimated percentage error of around 2.5% for both conditions. Additionally, an ANOVA analysis was performed, taking into account the temperature and time factors. The findings indicate that both factors exert a substantial influence on the dependent variable (u), with temperature (T) contributing 64.68%, time (t) contributing 27.37%, and the interaction of both factors (T × t) contributing 5.13%.

Studies on Tribological Characteristics and Wear Mechanisms of (TiN + TiC) Hybrid Nanocomposite Claddings Deposited on TC4-Grade Titanium Alloy Substrate by the Tungsten Inert Gas Cladding Process

Abstract This investigation explored the viability of tribological properties enhancement with the deposition of TiC + TiN nanoparticulate-reinforced hybrid composite claddings in TC4-grade titanium alloy to meet the ever-increasing functional performance requirements employed under aggressive tribological environments. The composite claddings are processed by using the tungsten inert gas cladding process. The tribological performance of the hybrid composite cladding deposition was evaluated against the claddings with simplex reinforcement compositions such as TC4/TiC and TC4/TiN composite claddings and the substrate alloy. Initially, the formation and microstructural characteristics of the composite cladding depositions are studied based on the scanning electron microscope, X-ray diffraction, and energy dispersive spectroscopic analyses to confirm their successful formation. The average microhardness achieved with the deposition of composite claddings such as TiC/TC4, TiN/TC4, and (TiC + TiN)/TC4 is 936.25 HV0.2, 858.88 HV0.2, and 1116. 72 HV0.2, respectively, while the TC4 substrate alloy is about 332.38 HV0.2. The (TiC + TiN)/TC4 hybrid composite cladding composition has shown significantly increased surface hardness which is about 30% and 18%, respectively, compared with the TiC/TC4 and TiN/TC4 composite cladding compositions while about 235% enhancement compared with the TC4 substrate alloy. Compared with the TC4 substrate alloy, the wear resistance enhancement achieved with the deposition of TiC/TC4 and TiN/TC4 composite claddings is up to 22.62% and 38.92%, respectively, while with the (TiC + TiN)/TC4 hybrid composite claddings is up to 49.87%. Similarly, the average CoF of the TC4 substrate alloy, TiC/TC4, TiN/TC4, and (TiC + TiN)/TC4 composite claddings observed are 0.76, 0.49, 0.58, and 0.44, respectively, which indicates that 36%, 23%, and 43% are the enhancements achieved with the respective composite claddings. The SEM analysis of worn surfaces of the composite claddings reveals typical wear mechanisms such as adhesive, abrasive, oxidation, and delamination that are represented by various regions identified on the generated wear maps. The adhesive and delamination wear regions are relatively wider for the TiN/TC4 composite cladding than the TiC/TC4 composite cladding. The wear mechanism of the composite cladding with multiphase TiC and TiN reinforcement particulate has shown an increased prevalence of abrasive wear as a consequence the abrasive wear region is wider while decreasing the window for adhesive and delamination wear.

Complex assessment of ambient particulate matter in a small settlement with coal-handling port

Relevance. Russian coal exports have been steadily increasing in recent years, and Far Eastern ports, originally not adapted to dusty cargoes, have switched to coal operations. Unoptimized coal handling leads to increased content of coal-containing particles in the air and to various environmental problems. Aim. To analyze the concentration of particulate matter in the air and the chemical composition of particles on the surface of conifer needles in the Posyet settlement (Primorsky Krai, Russia), where a large coal terminal operates. Materials and methods. The chemical composition was studied on the surface of conifer needles by X-ray fluorescence and in washout of conifer needle samples using Raman spectroscopy and energy dispersive analysis. Concentrations of particles with the diameter of 2.5 and 10 μm (PM2.5 and PM10, respectively) were measured using automatic monitoring stations. Results and conclusions. Chemical composition was dominated by mineral particles (calcite, silicates, etc.). However, the presence of coal particles (up to 8.3%) and metal particles was also observed. Mean concentrations of PM2.5 and PM10 were within the Russian and international health standards, but close to their upper limits. Concentrations of both measured particle fractions were highest during the winter months (as well as in March, which is traditionally a cold month in the Far East), followed by a gradual decrease. The study obtained new data on the annual variations of concentrations of PM2.5 and PM10, as well as on the basic composition of particles from the surface of woody vegetation (needles) as an indicator of the state of air pollution in this settlement.

Mining PANI/Ti3AlC2/CeO2 ternary composite CO sensor: Material synthesis, gas sensing performance and mechanism research

To address the issue of poor gas sensitivity in existing mining semiconductor CO sensor materials like PANI at room temperature, this study employed an ice-water bath in conjunction with an in-situ polymerization method to incorporate 2D sheet-like Ti3AlC2 and nano-CeO2 materials with oxygen vacancies into PANI. As a result, nanometer-sized PANI/Ti3AlC2/CeO2 ternary composite nanomaterial was synthesized. The morphology, synthesis mechanism, and thermal stability of the ternary composite material were investigated using scanning electron microscopy-energy dispersive analysis (SEM-EDS), transmission electron microscopy analysis (TEM), spectral analysis, and thermogravimetric methods. Furthermore, the CO gas sensing mechanism of the ternary composite material was also examined. The study discovered that the nano-PANI/Ti3AlC2/CeO2 ternary composite nanomaterial, when deposited on the Au interdigital electrode of the IDE substrate, exhibits superior gas transmission of 400 ppm CO compared to gas sensors based on nano-PANI, nano-PANI/Ti3AlC2, and nano-PANI/CeO2. The sensing response was enhanced by 1.75 times, 1.4 times, and 1.2 times, respectively. This improvement in sensing mechanism can be attributed to the pn heterojunction and interfacial interaction forces between the components. Hence, the nano-PANI/Ti3AlC2/CeO2 ternary composite nanomaterial holds potential as a high-performance CO detection sensing material at room temperature. Additionally, it can serve as a theoretical basis for further research on low-power, integrable sensor materials in coal mines.

IMPROVEMENT OF THE ALLOY STRUCTURE OF THE Ni-Cr-Со-W-Mo-Al-Ti-C SYSTEM

Purpose. Establishing the specifics of the influence of alloying elements on the formation of carbides in the structure, their shape and the possibility of separating TLC phases for the system of the Ni-Cr-Co-W-Mo-Al-Ti-C type using the CALPHAD calculation method of prediction in comparison with data obtained by the method of raster electron microscopy. Research methods. The results of experimental and calculated data, formed on the basis of experimental and results taken from open sources, are presented. The chemical composition was determined on a REM-106I scanning electron microscope equipped with an energy dispersive analysis. Experimental values were processed by the method of least squares with obtaining correlation dependencies of the “parameter-property” type and establishing mathematical equations of regression models that optimally describe these dependencies. Results. It was established that when the concentration of titanium is more than 4 % and molybdenum is more than 6 % and 15 % chromium, the formation of TSC phases (Р, s and m- phases) is possible, which reduce the operational properties of the alloy. It was found that when the alloy contains more than 25 % chromium, a solid chromium-based solution is formed, which reduces the properties of the alloy (mechanical and corrosion). It is shown that the obtained dependences correspond to reality and coincide with experimental data at the level of 10 %. Scientific novelty. Obtained dependences of the influence of alloying elements on the chemical composition of carbides will allow predicting properties without conducting experiments. It was established that changes in the course of dependencies are closely correlated with the processes occurring in the structure of alloys. Practical value. The obtained dependencies can be used both for the development of new heat-resistant alloys and for the improvement of the compositions of industrial alloys.

Simulations of nerve signal propagation in axons

PurposeIn the literature, soliton solutions of the Heimburg–Jackson model have been proposed by Drab et al. (2022), but for the considered models, i.e. Eq.(1) and Eq.(2), the existence of solitons, the dispersion analysis and the pseudospectral method have been studied (Engelbrecht et al., 2006, 2018, 2020; Tamm et al., 2017, 2022; Peets et al., 2013). Therefore, the gap should be filled by this work.Design/methodology/approachWhen nonlinear terms, dissipative terms and forcing terms are ignored, the system (Eq.(2)) reduces to a single, sixth-order partial differential equation (Tamm et al., 2022). In this work, our aim is to propose analytical solutions in the explicit form via ansatz-based method. Therefore, the parameter effects in wave profile will be proposed clearly in figures.FindingsWhile progress has been made in signal propagation in nerves, thanks to many experimental studies and theoretical predictions over the last two centuries, the results obtained in this study may answer new questions that arise.Originality/valueIn the literature, the existence of solitons, dispersion analysis and pseudospectral method have been investigated for the Heimburg-Jackson model (Engelbrecht et al., 2006, 2018, 2020; Tamm et al., 2017, 2022; Peets et al., 2013), and this study fills the gap in soliton solutions. Additionally, when nonlinear terms, dissipative term and forcing terms are ignored, the system (Eq.(2)) reduced to a single equation that is sixth-order partial differential equation (Tamm et al., 2022). In this work, our aim is to propose analytical solutions in the explicit form via ansatz-based method. Therefore, the parameter effects in wave profile will be proposed clearly in figures.

Nonlinear dispersion analysis using dynamic traveling wave model in chemical kinetics

Nonlinear dispersion analysis using dynamic traveling wave model in chemical kinetics

Real-time optical fibre near-infrared chromatic dispersion analyser using collocated optical fibre gratings

We present what we believe to be a novel optical fibre device for real-time measurements of near-infrared chromatic dispersion of a liquid medium from 1100 nm to 1700 nm. This inline optical fibre chromatic dispersion analyser is based upon collocated fibre long-period gratings written adjacently in the core by femtosecond laser inscription yielding 8 attenuation bands associated with different cladding modes, yielding 8 independent measurements. This fibre device is tested on a series of chemical compounds associated with wines. The results for each compound yielded distinctive chromatic responses. A machine learning pipeline was developed that successfully clustered and classified spectral responses of the different chemicals to illustrate the distinctive responses. The limits of detection for these fibre devices ranged from 1×10−3 to 6×10−5 mol/L for the compounds associated with wines, demonstrating the potential usefulness of an optical fibre chromatic dispersion analyser is capable of monitoring in real-time effective chromatic dispersion that is not offered by any current technology.

Particle size and band gap evaluation of green gold nanoparticles (AuNPs) with potential applications

Abstract The present study was aimed towards green synthesis of gold nanoparticles (AuNPs) using fungal strain (SGSK-7) with assessment of their size using different techniques viz., X-ray diffractormeter, Dynamic light scattering, Atomic force microscopy, FE-Scanning Electron Microscopy and Fourier transform Infrared Spectroscopy. The intense characteristic diffraction peaks at angle 2Ѳ (38.13˚) presented the crystalline nature of the reduced gold solution and calculation of crystalline size (12 nm) using Scherer’s equation further confirmed synthesis of gold nanoparticles while dynamic light scattering analysis indicated the particle size range of gold nanoparticles between 2 nm to 50 nm. Field Emission Scanning Electron Microscopic (FESEM) and Atomic Force Microscopy (AFM) analysis of extracellular gold nanoparticles depicts spherical shape of AuNPs of approximately 40 nm. Fourier transform Infrared (FTIR) Spectroscopy depicted the presence of the gold nanoparticles along with the other biomolecules secreted by fungus which plays vital role in reduction, capping and stabilization of gold nanoparticles. Energy dispersive X-ray, mapping analysis, Zeta potential and UV-Vis spectrophotometery analysis further confirmed the presence and stability of gold nanoparticles, respectively. Zeta potential of gold nanoparticles leads to conclude the neutral nature (-10 mV to 10mV) of the particles. The UV-Visible spectrophotometeric analysis also confirmed the formation of gold nanoparticles with an absorption peak at 547 nm. On the basis of UV-Visible spectra the optical band gap of 2.44 eV is examined. The phylogenetic relatedness of SGSK-7 revealed 99% homology with Aspergillus tamari after sequencing of the ITS region followed by BLAST.

Defect induced persistence photoconductivity in spray pyrolyzed ZnO thin films: Impact of Sm3+doping

The persistent photoconductivity of the rare earth ion doped ZnO is an emerging field. The present work focuses on the effect of samarium (Sm3+) ion doping on the persistence photo response behaviour ZnO host matrix. The Zn1-xSmxO (x = 0.0 to 0.10) thin films were deposited on chemically cleaned glass substrates using spray pyrolysis technique. The films showed polycrystalline nature and hexagonal wurtzite structure without any impurity peaks. The Zn0.93Sm0.07O films showed maximum crystallite size of 24.2 nm and minimum dislocation density. The gradual change in the thickness of the fibrous nature was observed with the addition of Sm3+ ions into ZnO lattice. Energy dispersive analysis of x-ray and X-ray photoelectron spectroscopy confirmed the presence of elements and its oxidation states in the deposited film respectively. The area under the curve of deconvoluted photoluminescence spectra of deposits confirmed the decrease in the various defect percentage with increase in the doping concentration of Sm3+ ions. The photoluminescence spectra of Zn0.93Sm0.07O films showed maximum near band edge emission and minimum defects. The Zn0.93Sm0.07O films showed higher carrier concentration of 1 × 1017 cm−3, mobility 32 cm2/Vs and lower resistivity of 1 × 102 Ω cm due to improved film quality. The Zn0.93Sm0.07O films exhibited the current value under dark and ultraviolet light illumination was in the range of 10−6 A and 10−4 A respectively. The maximum photocurrent was noticed at 375 nm which corresponds to the bandgap of the deposited films. The Zn0.93Sm0.07O films showed faster photo response (5 s and 131 s of response and recovery time) due to the presence of minimum trap states. Hence the Zn0.93Sm0.07O films can be used in the fabrication of light dependent resistors and ultraviolet sensors.

Aminated ZIF‐8 to facilitate CO2 sieving through polyvinyl alcohol/ionic liquid membranes

AbstractCO2 separation technology at low pressure is most desirable in carbon capture projects to mitigate global warming. Facilitated transport membranes offer selective and effective CO2 permeation using a wide range of carbon carriers at low pressure. Porous fillers were recently included as they can carry abundant fixed carriers besides offering open channels for CO2 permeation. This study investigates the effects of amine‐modified zeolitic imidazolate framework‐8 (ZIF‐8) with well‐defined micropores and gas sieving ability in polyvinyl alcohol (PVA) membranes containing an ionic liquid that worked as mobile carriers. The effects of amine‐modified ZIF‐8 and silica nanoparticles on membrane properties and separation performance were also compared. Fourier transform infrared spectra confirmed the incorporation of ZIF‐8, secondary amine, IL anions, and silica nanoparticles in PVA membranes. Energy dispersive analysis showed the good dispersion of inorganic fillers. The amine‐modified silica nanoparticles resulted in higher thermal stability compared to the amine‐modified ZIF‐8 in PVA membranes containing [bmin][Ac] ionic liquid, as shown in the thermogravimetric analysis. However, the CO2 separation performance of PVA membranes containing [bmim][Ac] ionic liquid was improved more significantly by the amine‐modified ZIF‐8 with microporous structure. A CO2/N2 ideal selectivity of 85.65 and CO2 permeance up to 4,502.91 GPU were attained. Unlike the CO2/N2 ideal selectivity, the CO2 permeance was not significantly affected either using [bmin][Ac] or [bmin][BF4]. The humid gas greatly enhanced the CO2 permeance without much changes in the CO2/N2 ideal selectivity due to the promotion of facilitated transport. © 2024 Society of Chemical Industry and John Wiley & Sons, Ltd.