Disinfection Protocols Research Articles

The effect of different access cavity designs on bacterial biofilm reduction using Er,Cr:YSGG laser in comparison to conventional disinfection protocols. An in vitro study

The effect of different access cavity designs on bacterial biofilm reduction using Er,Cr:YSGG laser in comparison to conventional disinfection protocols. An in vitro study

Comparative analysis of commercial cleaning and disinfection formulations and protocols for effective eradication of biofilms formed by a Pseudomonas fluorescens strain isolated from a poultry meat plant

Pseudomonas spp. is the main genus of spoilage bacteria for meat stored under aerobic chilling conditions. Given their ability to adapt to various environmental conditions and to form biofilms, they are common among residential microbiota in the food industry. Biofilms are complex, structured microbial communities encased in a self-produced exopolysaccharide matrix. Resident biofilm bacteria show increased resistance against disinfectants and dynamic or hostile environments, and are therefore a persistent source of food contamination. Hence, there is a need to design and implement control strategies that are effective against biofilms in the food industry. In this study, we tested a series of commercial cleaning and disinfection agents applied by immersion or aerosolization against robust biofilms of a Pseudomonas fluorescens strain isolated from a poultry meat plant by comparing the sessile cell counts before and after the procedure. The single application of a) an alkaline or an enzymatic detergent, b) a disinfectant based on peracetic acid and hydrogen peroxide, or c) a detergent-disinfectant based on tertiary alkylamines or sodium hypochlorite, failed to completely eradicate the biofilm. However, two-step cleaning and disinfection procedures involving the application of a detergent (either alkaline or enzymatic at 50 °C) followed by the application of the disinfectant based on peracetic acid and hydrogen peroxide at the manufacturer's recommended concentrations did result in the complete eradication (p ≤ 0.05) of the robust biofilm. In addition, cleaning and disinfection procedures applied by aerosolization showed a notable efficacy (p ≤ 0.05) against surface-dried cells and sessile cells of P. fluorescens. Therefore, this approach could be regarded as a potentially viable alternative to commonly applied immersion techniques.

Effect of double-premilking teat disinfection protocols on bacterial counts on teat skin of cows and milker gloves in a free-stall-housed dairy herd.

This research communication addresses the hypothesis that double premilking teat disinfection (DD) is more effective in reducing soiling and bacterial count on the cows' teat skin and milkers' gloves than conventional disinfection (CONV). The design was a 3 × 3 Latin square (three groups of cows and three treatments) with conventional teat disinfection (CONV, lactic acid application after forestripping), double teat disinfection using the same disinfectant (DD1D, lactic acid application before and after forestripping), and double teat disinfection using two different disinfectants (DD2D, application of lactic acid before and chlorine-based disinfectant after forestripping). All groups were assigned for six days for each treatment, and the evaluations and samples were collected on the last day, before and after treatment. We evaluated the teat cleanliness score (TCS), count of Gram-negative bacteria (coliforms and noncoliforms), Staphylococcus spp., Streptococcus spp., and total bacterial count (TBC) on the cows' teats and TBC on the milkers' gloves. TCS after premilking was lower in DD than CONV treatment. The reduction of Staphylococcus spp. count was greater in the DD treatment and tended to be higher in the DD2D. The TBC reduction on the cows' teats was greater in the DD treatments. The TBC on the milkers' gloves was lower for DD before and after premilking. In conclusion, DD can be an alternative for reducing some bacterial populations on cow teats and preventing the transmission of microorganisms between cows via the milkers' hands.

Alcohol-Based Chlorhexidine and Potassium Sorbate Rub Strengthens the Effectiveness of Traditional Hand Scrubbing and Improves Long-Lasting Effectiveness-Evaluation of Hand Preparation Protocols According to EN 12791.

Despite the advantages of surgical handrub in terms of the ease of application and effectiveness, chlorhexidine (CHG)-based hand scrubbing remains the preferred method for surgical hand preparation. However, it does not systematically meet the non-inferiority requirement of the European norm (EN) 12791 with respect to n-propanol (the reference product) and does not provide the sustained efficacy expected for these long-lasting agents. Commercially available alcohol-based products have also failed to demonstrate sustained efficacy according to EN 12791. Multi-step protocols enhance the efficacy of hand scrubbing, yet their extended disinfection duration might diminish their allure for healthcare professionals. In this study, we show that hand scrubbing with CHG 4% followed by a 1 min rubbing with the novel formulation of ethanol (Et) 70%/CHG 3% plus 0.3% potassium sorbate food additive (PS) meets the non-inferiority requirement and demonstrates sustained efficacy when tested according to EN 12791. The immediate and 3 h effect of this protocol was significantly higher than that of n-propanol and the homologous disinfection protocol without PS (CHG 4% hand scrub plus Et 70%/CHG 3% rub), demonstrating that the inclusion of PS confers a notable residual effect. We speculate that this non-volatile ingredient acts synergistically with CHG. This promising combination represents an alternative method for the development of new disinfection strategies.

Fighting Salmonella Infantis: bacteriophage-driven cleaning and disinfection strategies for broiler farms.

Salmonella is a bacterium that can cause food-borne infections and is responsible for the most common gastrointestinal illnesses. The emergence of multi-drug resistant (MDR) strains worldwide is a major threat, representing a major challenge in public health. To reduce its incidence, the One Health approach is required, and the development of new biocontrol protocols will help prevent or eliminate the spread of Salmonella. Prevention measures, such as on-farm cleaning and disinfection protocols, are a crucial step in reducing infection to new flocks and eliminating bacteria that remain in the facilities. However, MDR Salmonella species, such as S. Infantis, are highly resistant to conventional cleaning and disinfection protocols, with an increased ability to persist in the broiler farm environment. The need for alternative biocontrol methods has led to the use of bacteriophages or phages, viruses that target bacteria, as promising tools. Thus, the aim of this study was to evaluate the efficacy of phages as a biocide against S. Infantis isolates in combination with cleaning and disinfection protocols in 10 commercial poultry farms. All commercial farms selected in this study had persistent Salmonella, even after the routinely used cleaning and disinfection procedures. In addition, Salmonella isolated before treatment were phenotypically characterized by antimicrobial resistance patterns. The results showed that 100% of S. Infantis were resistant to at least one antibiotic, and > 70% were MDR. Phages were then isolated against the in-farm bacteria, purified, and multiplied for each poultry farm. The cleaning and disinfection protocols included the application of the lytic phages (vB_Si_CECAV_FGS009; vB_Si_CECAV_FGS017; vB_Si_CECAV_FGS029 and vB_Si_CECAV _FGS030) twice at 24-h intervals between cleaning and disinfection. Following the cleaning and disinfection procedures, Salmonella detection was reduced from 100% after cleaning to 36% after applying the phages and dropped to 0% after the final step of disinfection, thus eliminating Salmonella from the farm facilities. This study demonstrates that bacteriophage application after cleaning and before disinfection enhances the removal of MDR Salmonella Infantis in commercial broiler farms, suggesting their use as biocontrol agents to reduce Salmonella, a major public health concern.

Bacterial Colonization of Mobile Phones: Myth or Reality.

Introduction Bacteria tend to persist on mobile phones for longer durations causing hospital-acquired infections. This is primarily because mobile phones have become an extended hand to healthcare workers due to their unavoidable utilization and the lack of sanitization after use in wards. Methods A questionnaire was used to assess the usage and disinfection practices of mobile phones among medical students regularly attending the wards of a teaching hospital. Culture was done to assess the presence of bacteria and their resistance to antibiotics. Three sterile cotton swabs were performed for each mobile phone. If growth was present, then a culture smear was made, and the type of bacteria was assessed. Participants received subsequent education on the disinfection of phones according to standard disinfection protocol. The main objective of the study was to determine the presence of bacteria on students' mobile phones and its resistance to antibiotics. Results A total of 103 medical students took part in the study, which included 51 males and 52 females. It was found that all the students used their mobile phones at all times in wards and 43% of them carried their phones to washrooms. Out of all the students surveyed, only 23% of students had regularly disinfected their phones. Bacteria were present on all mobile phones sampled. Among these, 98.05% had Gram-positive bacteria, 82.52% had Gram-negative bacilli, 33.98% had Bacillaceae, and 8.73% had vancomycin-resistant enterococcus (VRE). Among participants who did not disinfect their phones, 95.89% and 97.59% had methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA), respectively. Conclusion Following standard disinfection protocols is the need of the hour to reduce hospital-acquired infections.

Exploring toilet plume bioaerosol exposure dynamics in public toilets using a Design of Experiments approach

Bioaerosols generated during toilet flushing can contribute to the spread of airborne pathogens and cross-contamination in indoor environments. This presents an increased risk of fomite-mediated or aerosol disease transmission. This study systematically investigated the factors contributing to increased bioaerosol exposure following toilet flushing and developed an empirical model for predicting the exposure-relevant bioaerosol concentration. Air in a toilet cubicle was sampled by impaction after seeding with Clostridium difficile spores. Design of Experiments (DoE) main effects screening and full factorial design approaches were then employed to investigate the significant factors that heighten the risk of exposure to bioaerosols post-flush. Our findings reveal that the inoculated bacterial concentration (C), time elapsed after flushing (t), lateral distance (d), and mechanical ventilation (v) are significant predictors of bioaerosol concentration, with p-values < 0.05. The interaction term, C × d showed a marked increase in bioaerosol concentration up to 232 CFU/m3 at the closest proximity and highest pathogen load. The interplay of C and t (C × t) demonstrated a time-dependent attenuation of bioaerosol viability, with concentrations peaking at 241 CFU/m3 immediately post-flush and notably diminishing over time. The lateral distance and time post-flush (d × t) interaction also revealed a gradual decrease in bioaerosol concentration, highlighting the effectiveness of spatial and temporal dilution in mitigating bioaerosol exposure risks. Furthermore, there is an immediate rise in relative humidity levels post-flush, impacting the air quality in the toilet environment. This study not only advances our understanding of exposure pathways in determining bioaerosol exposure, but also offers pivotal insights for designing targeted interventions to reduce bioaerosol exposure. Recommendations include designing public toilets with antimicrobial surfaces, optimizing ventilation, and initiating timely disinfection protocols to prioritise surfaces closest to the toilet bowl during peak exposure periods, thereby promoting healthier indoor environments and safeguarding public health in high-traffic toilet settings.

Continuous production and recirculation of plasma‐activated water bubbles under different flow regimes for mixed‐species bacterial biofilm inactivation inside pipelines

AbstractBiofilm formation in broiler drinking water systems is a public health concern. Bacterial detachment from the pipes into the drinking water subsequently increases the risk of waterborne transmission and has detrimental effects on animal and human health. The study evaluated the antimicrobial effectiveness of plasma‐activated water bubbles (PAWBs) recirculated under different flow regimes against the mixed‐species biofilms of Salmonella Typhimurium ATCC13311 and Aeromonas australiensis 03‐09 grown on the inner surfaces of polyvinyl chloride (PVC) pipes. A benchtop pipeline model representing broiler drinker lines was developed to compare the biofilm inactivation efficacy of PAWB recirculated at different flow rates, corresponding to Reynold's number of 1000, 2500, and 4000. The synergistic mechanical and oxidative recirculation using PAWB resulted in a higher biofilm inactivation from the pipe walls as compared to recirculation using distilled water alone. Apart from the flow regimes, various parameters including the volume of PAWB circulated, the concentration of the major plasma reactive species, and treatment time affected the susceptibility of the mixed‐species biofilms to PAWB treatment. Under all tested conditions, the bacterial cells were below the detection limit of 1 log CFU/mL in water after PAWB treatments. A better understanding of the hydrodynamic variations prevalent in the drinking water system is important for designing an effective disinfection protocol using PAWB. The results obtained from the study provide important information on the use of PAWB for biofilm control strategies.

Evaluating the Performance of UV Disinfection across the 222-365 nm Spectrum against Aerosolized Bacteria and Viruses.

Bioaerosols play a significant role in the transmission of many infectious diseases, especially in enclosed indoor environments. Ultraviolet (UV) disinfection has demonstrated a high efficacy in inactivating microorganisms suspended in the air. To develop more effective and efficient UV disinfection protocols, it is necessary to evaluate and optimize the effectiveness of UV disinfection against aerosolized bacteria and viruses across the entire UV spectrum. In this study, we evaluated the performance of UV disinfection across the UV spectrum, ranging from 222 to 365 nm, against aerosolized bacteria and viruses, including Escherichia coli, Staphylococcus epidermidis, Salmonella enterica, MS2, P22, and Phi6. Six commonly available UV sources, including gas discharge tubes and light-emitting diodes with different emission spectra, were utilized, and their performance in terms of inactivation efficacy, action spectrum, and energy efficiency was determined. Among these UV sources, the krypton chloride excilamp emitting at a peak wavelength of 222 nm was the most efficient in inactivating viral bioaerosols. A low-pressure mercury lamp emitting at 254 nm performed well on both inactivation efficacy and energy efficiency. A UV light-emitting diode emitting at 268 nm demonstrated the highest bacterial inactivation efficacy, but required approximately 10 times more energy to achieve an equivalent inactivation level compared with that of the krypton chloride excilamp and low-pressure mercury lamp. This study provides insights into UV inactivation on bioaerosols, which can guide the development of effective wavelength-targeted UV air disinfection technologies and may significantly help reduce bioaerosol transmission in public areas.

Effect of ozone gas on cultures of Candida albicans and Aspergillus fumigatus: evaluation of two ozonation devices.

Candida albicans and Aspergillus fumigatus are two important agents of Healthcare-associated infections. This study aimed to evaluate the antifungal activity of ozone (O3) gas produced by two commercial devices against cultures of these two species. Sterile plastic plates were inoculated with C. albicans and A. fumigatus and placed on a countertop at three distances (30 cm, 1 m, and 2 m) and three positions in relation to the wall (near, middle, and away), considering the source of O3. Plates were exposed to O3 for one hour and incubated. After incubation, the counting of colony-forming units was performed. As a control, an inoculated plate was incubated, without being exposed to O3. Tests were carried out with two different devices (namely, Mod.I and Mod.II), with the air conditioner on and off, in triplicate. Both devices showed antifungal activity. Mod. I presented better results, due to a higher flow rate. The best activity was on plates at 30 cm, middle position. Contrarily, on plates at 2m, near the wall, the inhibition activity was lower. The best results were obtained with the air conditioner off. Candida albicans was more sensitive to O3 than A. fumigatus. This method of decontamination by O3 gas shows potential due to its fast and easy execution. The establishment of new protocols for hygiene and hospital disinfection using this approach should be considered, which may reduce environmental contamination by fungi and, consequently, the burden of fungal infections.

Microbial composition and diversity in intraradicular biofilm formed in situ: New concepts based on next-generation sequencing.

This study aimed to characterize the taxonomic composition of intraradicular multispecies biofilms (IMB) formed in situ in a model to reproduce clinical conditions. Twelve palatal roots of maxillary molars had its canals prepared. Two roots were randomly selected to sterility control. Ten intraoral prosthetic appliances with lateral slots were fabricated. The roots were positioned in the slots with the canal access open to the oral cavity. Eight volunteers wore the appliance for 21 days, and two wore it at two different time points. One root from each appliance was removed and stored at -20°C until DNA extraction and sequencing (n=10). Biofilm was analyzed using next-generation sequencing and bioinformatics. The V4 hyper-variable region of the 16SrRNA gene was amplified and sequenced. For data analyses, the mothur pipeline was used for 16SrRNA processing, and subsequent analyses of the sequence dataset were performed in R using the Microbiome Analyst R package. The taxonomy-based analysis of bacterial communities identified 562 operational taxonomic units (OTUs), which belonged to 93 genera, 44 families, and 8 phyla. Bacterial colonization was different for each biofilm, and samples did not have the same group of bacteria. Alpha and beta diversity analysis revealed some general patterns of sample clustering. A core microbiome of prevalent OTUs and genera was identified. IMBs were heterogeneous when analyzed individually, but some diversity patterns were found after sample clustering. The experimental model seemed to reproduce the actual biofilm composition in endodontic infections, which suggests that it may be used to evaluate disinfection protocols.

Microbial composition and diversity in intraradicular biofilm formed in situ: New concepts based on next-generation sequencing.

This study aimed to characterize the taxonomic composition of intraradicular multispecies biofilms (IMBs) formed in situ in a model to reproduce clinical conditions. Twelve palatal roots of maxillary molars had its canals prepared. Two roots were randomly selected to sterility control. Ten intraoral prosthetic appliances with lateral slots were fabricated. The roots were positioned in the slots with the canal access open to the oral cavity. Eight volunteers wore the appliance for 21 days, and two wore it at two different time points. One root from each appliance was removed and stored at -20°C until DNA extraction and sequencing (n=10). Biofilm was analyzed using next-generation sequencing and bioinformatics. The V4 hyper-variable region of the 16SrRNA gene was amplified and sequenced. For data analyses, the mothur pipeline was used for 16SrRNA processing, and subsequent analyses of the sequence dataset were performed in R using the MicrobiomeAnalyst R package. The taxonomy-based analysis of bacterial communities identified 562 operational taxonomic units (OTUs), which belonged to 93 genera, 44 families, and 8 phyla. Bacterial colonization was different for each biofilm, and samples did not have the same group of bacteria. Alpha and beta diversity analysis revealed some general patterns of sample clustering. A core microbiome of prevalent OTUs and genera was identified. IMBs were heterogeneous when analyzed individually, but some diversity patterns were found after sample clustering. The experimental model seemed to reproduce the actual biofilm composition in endodontic infections, which suggests that it may be used to evaluate disinfection protocols.

Recommendations for post-rehabilitation care of maxillofacial prostheses

Aim: This study aimed to review the scientific literature to describe the main care and hygiene protocols for different types of maxillofacial prostheses (MFP). Methods: A bibliographic search on the PubMed / Medline database using the following keywords: [“maxillofacial prosthesis” OR “ocular prostheses” OR “palatal obturators”] AND [“Cleaning” OR “disinfection”] AND [“care”] AND [“color stability”] OR [“denture cleansers” OR “cleansing agents”]. Articles addressing materials, cleaning and disinfection protocols, and care related to MFP were included. The following exclusion criteria were applied: no adequate methodology, incompatibility with the area of interest, and unavailability for reading in full. Results: The papers were grouped into the following topics: facial prostheses, ocular prostheses, maxillofacial intraoral prostheses, and retention systems. Conclusion: Despite the MFP changes over time, its degradation decreases upon following the recommendations and post-adaptation care. The guidelines for cleaning and disinfection must be individualized to guarantee the longevity of the prosthesis and the patient health.

Prospective Study on the Influence of Occupational Hand Protection Products on the Efficacy of Hand Disinfection.

To prevent occupational skin diseases, employees are instructed to periodically apply hand protection products as a barrier to protect their hands from water, cleaning agents or other irritants. The aim of this work was to investigate whether bacteria present on the skin at the time of protection product application are enclosed underneath this protective layer, if they can be transferred to other surfaces and if a standard isopropanol-based skin disinfectant can nonetheless reduce the bacterial burden. This prospective study was conducted in human volunteers based on the European Standard (EN 1500) to assess the burden of microorganisms before and after the application of various protection product formulations and subsequent hand disinfection. All protection products, with the exception of alcohol-based gels, enclosed bacteria underneath a lipid layer which could be transferred onto other surfaces. Still, the hand disinfectant efficiently reduced the bacteria burden. In occupations where proper hand hygiene is vital, alcohol-based gels might be the best option for the protection of the skin barrier as well as for reducing the contamination risk. An alcohol-based disinfection agent can dissolve the lipid film of protection products following the standard protocol for hygienic hand disinfection.

Establishing surface disinfection protocol for micropropagation of clonal apple rootstock MM111

Establishing surface disinfection protocol for micropropagation of clonal apple rootstock MM111

Microwave disinfection of facial silicone prostheses, Part 1: Color stability

The choice of cleaning method is an important consideration for lengthening the serviceable time of facial prostheses as microbial organisms and biofilms could degrade facial prostheses and cause skin irritation. Whether microwave disinfection is a suitable cleaning method without degradation of the properties of a prosthesis is unclear. The purpose of this in vitro study was to measure the color stability of 6 commonly used facial silicone elastomers after microwave disinfection over a simulated 1.5-year period. Six different facial silicone elastomers: MDX4-4210, MDX4-4210/Type A, M511, A-2186, VST-50, and A-2000 were mixed with intrinsic silicone white opacifier (except for the control group) and subsequently combined with 4 silicone intrinsic pigment color groups: red (R), yellow (Y), burnt sienna (B), and a mixture of R+Y+B (M). The control group was a silicone elastomer without opacifier or pigment. Each of the 30 experimental groups consisted of 5 specimens (N=150). Five specimens were placed in a 250-mL Erlenmeyer flask filled with 160mL of tap water. Seven flasks were then placed in a 660-W microwave oven. An exposure of 6 minutes was used according to the antimicrobial efficacy of microwave disinfection protocol on facial silicone prostheses with a final water temperature of 60°C for 18 times (simulating 1.5 years of microwave disinfection with one 6-minute exposure monthly). A spectrophotometer was used to measure reflectance color change values (∆E). Color differences were calculated following CIELab (∆E*ab) and CIEDE2000 (∆E00) formulae. ∆E*ab and ∆E00 were statistically analyzed by a linear mixed effects model with 3 factors (silicone type, color shade, and time) using the R Statistical software program (α=.05). Both ∆E*ab and ∆E00 of all silicone elastomers studied were less than the visual perceptibility thresholds (∆E*ab<1.1 and E00<0.7) and were considered clinically acceptable (∆E*ab<3.0 and E00<2.1) after the 1.5-year simulation of microwave disinfection. Yellow and blue pigments had more effect on MDX4-4210 and M511, while red pigment had more effect on MDX4-4210, MDX4-4210/Type A, and M511 (P<.05). Nevertheless, the values were still below the perceptibility threshold (∆E*ab≤1.0 and E00<0.6). All 6 facial silicone elastomers maintained clinically acceptable color after 18 months of exposure to microwave disinfection.

Knowledge, attitude, and practice of dental health professionals toward dental impression disinfection protocol during the COVID-19 pandemic in Saudi Arabia– a cross-sectional study

BackgroundDespite the updated guidelines on dental impression disinfection protocols during the COVID-19 pandemic, adherence to such procedures has not been studied among dental health professionals in Saudi Arabia. Understanding DHPs’ knowledge, attitudes, and practices regarding COVID-19 is crucial in assessing a willingness to adhere to the recommendations provided by health authorities in mitigating the spread of COVID-19 via dental impressions impacting patient safety and infection control measures. Hence, this study aimed to assess dental health professionals’ (DHPs) knowledge, attitudes, and practices (KAP) toward dental impression disinfection protocol during the COVID-19 pandemic in Saudi Arabia.MethodsA cross-sectional study using an online survey was conducted from 14 December 2022 to 21 March 2023 among practicing dentists, dental assistants (DA), dental laboratory technicians (DT), and dental hygienists in Saudi Arabia. A validated and reliable questionnaire that consisted of 38 items along with demographic variables was prepared to collect the data. Using Google Forms, a questionnaire link was prepared and shared on the social media platforms of DHPs in Saudi Arabia. A descriptive analysis was conducted to report the percentages and frequencies. The mean knowledge, attitude, and practice scores were analyzed using an Independent t-test, ANOVA, and Pearson’s correlation tests.ResultsA total of 718 DHPs voluntarily participated in the survey. Most of the DHPs exhibited average knowledge 392 (54.6%), neutral attitudes 393(54.7%), and adequate 549 (76.5%) practice towards dental impression disinfection protocol. The mean knowledge score differed significantly across nationality (p = 0.013), type of DHPs (p < 0.001), qualification (p = 0.045), and experience (p = 0.028) of the study participants. Significant differences in attitude towards impression disinfection were observed in different age groups (p = 0.002), qualifications (p = 0.015), and experiences (p = 0.024) of the DHPs. Similarly, practice varied across different age groups (p = 0.010), nationality (p = 0.013), type of DHPs (p = 0.019), qualification (p = 0.044), experience (p = 0.041), and COVID-19 Infection (p = 0.006). Moreover, a significant positive correlation between knowledge-attitude (r = 0.258, p < 0.01), knowledge-practice (r = 0.283, p < 0.01), and attitude-practice (r = 0.196, p < 0.01) was observed.ConclusionDHPs considered in this study demonstrated average knowledge and attitudes toward impression disinfection, requiring improvement through continuous dental education and training. However, they displayed acceptable dental impression disinfection practices during the COVID-19 pandemic. It is highly recommended that continuing education programs should mainly reinforce the knowledge of sodium hypochlorite, iodophor, and phenolics and their concentrations to be used as an impression disinfectant. Additionally, it should focus on techniques of disinfecting elastomeric, hydrocolloid, zinc oxide and eugenol, and impression compound materials to mitigate the spread of COVID-19 based on Saudi ministry of health guidelines.

The efficacy of 2780 nm Er,Cr;YSGG and 940 nm Diode Laser in root canal disinfection: A randomized clinical trial

ObjectivesEffective disinfection of the root canals is the cornerstone of successful endodontic treatment. Diminishing the microbial load within the root canal system is crucial for healing in endodontically treated teeth. The aim of this study was to evaluate the effect of 2780 nm Er,Cr:YSGG and 940 nm diode lasers on the eradication of microorganisms from single-rooted teeth with asymptomatic apical periodontitis.Materials and MethodsThirty participants conforming to the inclusion criteria were randomly divided into 3 groups according to the disinfection protocol used; Conventional group: 2.5% Sodium Hypochlorite (NaOCl) and 17% EDTA solution NaOCl/EDTA, Dual laser group: 2780 nm Erbium, chromium: yttrium scandium-gallium-garnet (Er,Cr:YSGG) laser and 940 nm diode laser Er,CrYSGG/Diode, and Combined group: 17% EDTA and 940 nm diode laser EDTA/Diode. Bacterial samples were collected before and after intervention. The collected data were statistically analyzed using Friedman’s test and Kruskal–Wallis test (P ≤ 0.05).ResultsThe results of the study showed that both dual laser Er,CrYSGG/Diode and combined laser EDTA/Diode groups showed significantly less mean Log10 CFU/ml of aerobic and anaerobic bacterial counts than the conventional NaOCl/EDTA group.ConclusionsIn this study we evaluated in vivo the bactericidal efficacy of three disinfection protocols for endodontic treatment of single-rooted teeth with apical periodontitis. The results indicated that both dual laser Er,CrYSGG/Diode and combined laser EDTA/Diode groups provide superior bactericidal effect compared to the conventional NaOCl/EDTA group.Clinical relevanceThe integration of lasers into root canal disinfection protocols has demonstrated significant bacterial reduction which might promote healing and long-term success.

Infection Control Practices in Dental Clinics and Dental Care Settings during COVID - 19's Spread: A Comprehensive Review

Coronavirus disease 2019 (COVID-19) is caused by a novel coronavirus, known as severe acute respiratory syndrome. Dental care units and settings face various problems relating to the transmission of disease during treatment and dental operations. The degree to which the healthcare system is ready affects how well coronavirus illness is managed. Blood, saliva, and mixed water droplets possessing the virus cause contamination of equipment used for dental treatment. Both patients and workers may become transmitters and infectors of COVID-19 through direct contact during dental operations. It is possible for dental professionals and patients to contract COVID-19 and spread it to others. The dental care routine is very effective as we discussed below the prevention steps are very effective. All healthcare workers at the dentistry clinics should collaborate to prevent the spread of the COVID-19 virus among patients. The primary aim is to make dental health care providers aware of the pathophysiology of COVID-19 and to increase their preparedness and understanding of this challenge, which will aid in controlling transmission. The information and data that collected will be useful for the dental community in providing effective patient management through evidence-based recommendations for infection control and disinfection protocols.

Effect of supplementary sodium hypochlorite agitation techniques on an exvivo oral multispecies biofilm during passive disinfection of simulated immature roots.

To compare the effect of different sodium hypochlorite (NaOCl) agitation techniques on an exvivo oral multispecies biofilm during passive disinfection of simulated immature roots. Extracted human teeth were prepared to simulate immature roots. They were infected with a dental plaque-derived multispecies biofilm and cultured for 14 days. The roots were randomly designated into four groups: (1) negative control (PBS), (2) 1.5% NaOCl (CNI), (3) CNI + Ultrasonic activation (UA), (4) CNI + EasyClean agitation (ECA), (5) CNI + XP-endo finisher agitation (XPF), and (6) positive control (6% NaOCl). Biofilm samples were collected from the root canals and used to determine the number of viable cells (colony-forming units), scanning electron microscopy, and 16S rRNA gene sequencing. The mean colony-forming units per mL (CFU/mL) were analysed using One-way anova. 16S rRNA sequencing data were analysed for alpha (observed OTUs, Shannon index, and Chao1) and beta diversity (Bray-Curtis dissimilarities). The LEfSe analysis was used to determine the effect of treatment procedures on the abundance of root canal microbiota. The significance was set at .05. PBS and CNI samples had significantly higher CFU/mL counts than UA, ECA, XPF, and 6% NaOCl samples (p < .05). The pre-treatment, PBS, and CNI groups had significantly greater alpha diversity than the UA, ECA, XPF, and 6% NaOCl groups (p < .05). NaOCl agitation groups and the 6% NaOCl group achieved a more pronounced reduction in bacteria from the genera Fusobacterium, Actinomyces, Porphyromonas, and Capnocytophaga. The effectiveness of passive disinfection protocols was enhanced by NaOCl agitation techniques, suggesting that this supplementary method can improve the outcome of revitalization procedures.