Discrete Wavelet Transform Feature Extraction Research Articles

Diagnosis of Pulpitis from Dental Panoramic Radiograph Using Histogram of Gradients with Discrete Wavelet Transform and Multilevel Neural Network Techniques

Radiograph plays the major role of diagnosis, treatment and surgery in the Dental field. There are many types of Intra and extra oral radiographs in which Dental Panoramic Radiograph helps in visualising the full view of the oral cavity. Pulpitis is the dental diseases caused due to the inflammation of the dental pulp from untreated caries, trauma or multiple restorations which leads to Apical Periodontitis. To predict the severity of pulp vitality pulp inflammation has to be evaluated. Radiographs helps the dentist in diagnosing the extent of tooth decay and inflammation. An automatic diagnostic model is proposed using robust algorithms to diagnose pulpits. Dental Panoramic Radiograph is used in the proposed research to diagnose the pulpitis and to classify the normal teeth from the pulpitis. The collected images are pre-processed using Histogram Equalization and filtered using Gaussian and Median filters. Modified K-Means algorithm is applied to segment the bony and teeth area from the oral cavity area. Integral Histogram of Gradients with Discrete Wavelet Transform feature extraction techniques and Multi-Layer Neural Network Classifier is proposed to achieve the accuracy of 91.09% which can be used as an assistive tool by the dentist to diagnose pulpitis.

Steel strip surface inspection through the combination of feature selection and multiclass classifiers

Purpose During the production process of steel strip, some defects may appear on the surface, that is, traditional manual inspection could not meet the requirements of low-cost and high-efficiency production. The purpose of this paper is to propose a method of feature selection based on filter methods combined with hidden Bayesian classifier for improving the efficiency of defect recognition and reduce the complexity of calculation. The method can select the optimal hybrid model for realizing the accurate classification of steel strip surface defects. Design/methodology/approach A large image feature set was initially obtained based on the discrete wavelet transform feature extraction method. Three feature selection methods (including correlation-based feature selection, consistency subset evaluator [CSE] and information gain) were then used to optimize the feature space. Parameters for the feature selection methods were based on the classification accuracy results of hidden Naive Bayes (HNB) algorithm. The selected feature subset was then applied to the traditional NB classifier and leading extended NB classifiers. Findings The experimental results demonstrated that the HNB model combined with feature selection approaches has better classification performance than other models of defect recognition. Among the results of this study, the proposed hybrid model of CSE + HNB is the most robust and effective and of highest classification accuracy in identifying the optimal subset of the surface defect database. Originality/value The main contribution of this paper is the development of a hybrid model combining feature selection and multi-class classification algorithms for steel strip surface inspection. The proposed hybrid model is primarily robust and effective for steel strip surface inspection.

Stacked Auto-Encoder Based CNC Tool Diagnosis Using Discrete Wavelet Transform Feature Extraction

Machining processes are critical and widely used components in the manufacturing industry because they help to precisely make products and reduce production time. To keep the previous advantages, a machine tool should be installed at the designated place and condition of the machine tool should be maintained appropriately to working environment. In various maintenance methods for keeping the condition of machine tool, condition-based maintenance can be robust to unpredicted accidents and reduce maintenance costs. Tool monitoring and diagnosis are some of the most important components of the condition based maintenance. This paper proposes stacked auto-encoder based CNC machine tool diagnosis using discrete wavelet transform feature extraction to diagnose a machine tool. The diagnosis model, which only uses cutting force data, cannot sufficiently reflects tool condition. Hence, we modeled diagnosis model using features extracted from a cutting force, a current signal, and coefficients of the discrete wavelet transform. The experimental results showed that the model which uses feature data has better performance than the model that uses only cutting force data. The feature based models are lower false negative rate (FNR) and false positive rate. Moreover, squared prediction error using normalized residual vector also reduced FNR because normalization reduces weight bias.

An EEG-based stereoscopic research of the PSD differences in pre and post 2D&3D movies watching

Despite knowing the reality of three-dimensional (3D) technology in the form of eye fatigue, this technology continues to be retained by people (especially the young community). To check the influences of the human brain's power spectrum density (PSD) pre and post a 2D and 3D movie watching, a five-member test group was arranged. In this study, electroencephalogram (EEG) was used as a neuroimaging method. EEG recordings of five individuals were taken both before and after watching 2D and 3D movies. The main framework of this study was to analyze the effects of power spectrum density (PSD) of the human brain by testing all EEG frequency bands before and after 2D and 3D movie watching, also to determine effective brain lobes, and consequently, EEG channels. After 2D/3D EEG recording, this record was divided into three stages for analysis. These stages consisted of Relax, Watching, and Rest. This benchmarking analysis included I) before and after watching the 2D movie (R2b and R2a), II) before and after watching the 3D movie (R3b and R3a), and III) after watching the 2D/3D movie (R2a and R3a). In the Relax and Rest stages, the 2D/3D EEG power differences in all channels of brain regions for the five EEG bands, including delta (δ), theta (θ), alpha (α), beta (β), and gamma (γ), were analyzed and compared. The PSD based on short-time Fourier transform (STFT) was used to select the dominant bands in this study. Feature extraction was performed on the preprocessed EEG signals using STFT and discrete wavelet transform (DWT). In the 2D analysis, δ, θ, α, and β acted as dominant bands, in 3D, δ, θ, and α were dominant bands, and in 2D/3D, δ and α were selected as meaningful and dominant bands. Partial least-squares regression (PLSR) and support vector machine (SVM) classification algorithms were considered in order to classify the obtained R2a and R3a EEG signals. After the dominant band selection, the correct choice of effective channel combinations in these bands resulted in the percentage of high success of classifiers for Stage III. Taking into account the optimum number of channels, the best percentage of classification accuracy for the average of PLSR and SVM classification results by considering the best channels of SVM and DWT feature extraction method is 91.83% and 80.73% respectively.

Rapid Driving Style Recognition in Car-Following Using Machine Learning and Vehicle Trajectory Data

Rear-end collision crash is one of the most common accidents on the road. Accurate driving style recognition considering rear-end collision risk is crucial to design useful driver assistance systems and vehicle control systems. The purpose of this study is to develop a driving style recognition method based on vehicle trajectory data extracted from the surveillance video. First, three rear-end collision surrogates, Inversed Time to Collision (ITTC), Time-Headway (THW), and Modified Margin to Collision (MMTC), are selected to evaluate the collision risk level of vehicle trajectory for each driver. The driving style of each driver in training data is labelled based on their collision risk level using K-mean algorithm. Then, the driving style recognition model’s inputs are extracted from vehicle trajectory features, including acceleration, relative speed, and relative distance, using Discrete Fourier Transform (DFT), Discrete Wavelet Transform (DWT), and statistical method to facilitate the driving style recognition. Finally, Supporting Vector Machine (SVM) is applied to recognize driving style based on the labelled data. The performance of Random Forest (RF), K-Nearest Neighbor (KNN), and Multi-Layer Perceptron (MLP) is also compared with SVM. The results show that SVM overperforms others with 91.7% accuracy with DWT feature extraction method.

Transmission line icing prediction based on DWT feature extraction

Transmission line icing prediction is the premise of ensuring the safe operation of the network as well as the very important basis for the prevention of freezing disasters. In order to improve the prediction accuracy of icing, a transmission line icing prediction model based on discrete wavelet transform (DWT) feature extraction was built. In this method, a group of high and low frequency signals were obtained by DWT decomposition, and were fitted and predicted by using partial least squares regression model (PLS) and wavelet least square support vector model (w-LSSVM). Finally, the final result of the icing prediction was obtained by adding the predicted values of the high and low frequency signals. The results showed that the method is effective and feasible in the prediction of transmission line icing.

A New Method Based for Diagnosis of Breast Cancer Cells from Microscopic Images: DWEE—JHT

In these days, there are many various diseases, whose diagnosis is very hardly. Breast cancer is one of these type diseases. In this paper, accuracy diagnosis of normal, benign, and malign breast cancer cell were found by combining mean success rates Jensen Shannon, Hellinger, and Triangle measure which connected with each other. In this article, an diagnostic method based on feature extraction Discrete Wavelet Entropy Energy (DWEE) and Jensen Shannon, Hellinger, Triangle Measure (JHT) Classifier for diagnosis of breast cancer. This diagnosis method is called as DWEE--JHT this paper. With this diagnosis method have found optimal feature subset using discrete wavelet transform feature extraction. Then these convenient features are given to Jensen Shannon, Hellinger, Triangle Measure (JHT) classifier. Then, between classifiers which are Jensen Shannon, Hellinger, and triangle distance have been validated the measures via relationships. Afterwards, breast cancer cells are classified using Jensen Shannon, Hellinger, and Triangle distance. Mean success rate of 16 feature vector with Jensen Shannon classifier is found % 97.81. Mean success rate of 16 feature vector with Hellinger classifier is found % 97.75. Mean success rate of 16 feature vector with Triangle classifier is found % 97.87. By averaging of results obtained from these 3 classifiers are found as 97.81 % average of accuracy diagnosis.

Facial Expression Recognition Based on MATLAB

In today's social life, communication between people is essential to do anything important way. The facial expressions are rich in human behavior information, it is very important means of communication, as a carrier of information, expression can convey a lot of voice can not convey the information. Expression recognition field of pattern recognition is a new task, is an essential part of intelligent machines. This paper studies the discrete wavelet transform feature extraction and expression using MATLAB software image feature extraction and treatment with an elastic template matching algorithm to do the appropriate test expression recognition.

Evaluation of red wines antioxidant capacity by means of a voltammetric e-tongue with an optimized sensor array

In this work, two sets of voltammetric sensors -prepared using different strategies- have been combined in an electronic tongue to evaluate the complete antioxidant profile of red wines. To this aim, wine samples were analyzed with the whole set of sensors. In order to reduce the large dimensionality of the data set while keeping the relevant information provided by the sensors, two different methods of feature selection and data compression were used (the kernels method and Discrete Wavelet Transform feature extraction method). Then, the coefficients obtained were used as the input variables of Principal Component Analysis (to evaluate the capability of discrimination. Partial-least squares regression (PLS) and artificial neural networks (ANNs) were performer to build the quantitative prediction models that allowed the quantification of the antioxidant capacity of the tested wines.

Face Recognition using Threshold Based DWT Feature Extraction and Selective Illumination Enhancement Technique

Face recognition (FR) under varying lighting conditions is challenging, and exacting illumination invariant features is an effective approach to solve this problem. In this paper, we propose a novel illumination normalization method called Selective Illumination Enhancement Technique (SIET) wherein the dark regions are selectively illuminated by using a correction factor which is determined by an Energy function. Also, we propose a Threshold based Discrete Wavelet Transform feature extraction for enhancing the performance of the FR system. Individual stages of the FR system are examined and an attempt is made to improve each stage. A Binary Particle Swarm Optimization (BPSO)-based feature selection algorithm is used to search the feature vector space for the optimal feature subset. Experimental results show the promising performance of Threshold based DWT extraction technique on ORL and UMIST databases and SIET on illumination variant databases like Extended Yale B and Color FERET.

Identify submitochondria and subchloroplast locations with pseudo amino acid composition: Approach from the strategy of discrete wavelet transform feature extraction

It is very challenging and complicated to predict protein locations at the sub-subcellular level. The key to enhancing the prediction quality for protein sub-subcellular locations is to grasp the core features of a protein that can discriminate among proteins with different subcompartment locations. In this study, a different formulation of pseudoamino acid composition by the approach of discrete wavelet transform feature extraction was developed to predict submitochondria and subchloroplast locations. As a result of jackknife cross-validation, with our method, it can efficiently distinguish mitochondrial proteins from chloroplast proteins with total accuracy of 98.8% and obtained a promising total accuracy of 93.38% for predicting submitochondria locations. Especially the predictive accuracy for mitochondrial outer membrane and chloroplast thylakoid lumen were 82.93% and 82.22%, respectively, showing an improvement of 4.88% and 27.22% when other existing methods were compared. The results indicated that the proposed method might be employed as a useful assistant technique for identifying sub-subcellular locations. We have implemented our algorithm as an online service called SubIdent ( http://bioinfo.ncu.edu.cn/services.aspx).

Tumor tissue identification based on gene expression data using DWT feature extraction and PNN classifier

In this paper, we propose the joint use of discrete wavelet transform (DWT)-based feature extraction and probabilistic neural network (PNN) classifier to classify tissues using gene expression data. In the feature extraction module, gene expression data are firstly transformed into time-scale domain by DWT and then the reconstructed signals by using wavelet transform are reduced to a lower dimensional feature space. In the module of tissue classification, the outputs of the extractor are fed into a PNN classifier, and the class labels are given finally. Some test and comparison experiments have been made to evaluate the performance of the proposed classification scheme, using the features extracted with as well as without wavelet transform processing procedure. Correct rates of 92% and 98.7% in tumour vs. normal classification have been obtained using the proposed scheme on two well-known data sets: a colon cancer data set and a human lung carcinomas data set.

Dimensionality reduction of hyperspectral data using discrete wavelet transform feature extraction

In this paper, the dyadic discrete wavelet transform is proposed for feature extraction from a high-dimensional data space. The wavelet's inherent multiresolutional properties are discussed in terms related to multispectral and hyperspectral remote sensing. Furthermore, various wavelet-based features are applied to the problem of automatic classification of specific ground vegetations from hyperspectral signatures. The wavelet transform features are evaluated using an automated statistical classifier. The system is tested using hyperspectral data for various agricultural applications. The experimental results demonstrate the promising discriminant capability of the wavelet-based features. The automated classification system consistently provides over 95% and 80% classification accuracy for endmember and mixed-signature applications, respectively. When compared to conventional feature extraction methods, the wavelet transform approach is shown to significantly increase the overall classification accuracy.