Discontinuous Buffer System Research Articles

SDS-PAGE Analyses and Electrophoretic Band Characterization of Three Cultivars of Grass Pea based on Seed Storage Proteins

Background: Grass pea (Lathyrus sativus L.) is valued for its high dietary protein content, high degree of adaptability under extreme conditions, disease resistance and low input requirement for its cultivation. This species is represented by several sub-species and important varieties which are not well distinguishable by their morphological characters. The objective of present study was to determine the cultivar differences based on seed storage protein by using SDS-PAGE and to obtain information useful for a breeding program. Methods: Gel electrophoresis was carried out in the discontinuous buffer system in a vertical electrophoresis apparatus and electrophoretic data were documented by using a gel documentation system. Seed protein sub-fractions (albumins, globulins, glutelins and prolamins) from seeds were extracted and quantified. ODAP (β-N-oxalyl-L-a,β-diaminopropionoc acid) an undesirable and toxic non-protein amino acid (responsible for ‘neuro-lathyrism’ disease) content was estimated. Result: The differences among cultivars were observed and clearly identifiable from their protein banding patterns in view of in number of bands, position of the bands and molecular weight of the bands etc. Quantity of total protein and sub-fractions of protein (albumins, globulin, glutelins and prolamins) of seed storage proteins also showed the variation among the three cultivars. ODAP content estimated in three grass pea cultivars was found very low ranging which is highly desirable for cultivation.

3D printed device for epitachophoresis

Polyacrylamide or agarose gels are the most frequently used sieving and stabilizing media in slab gel electrophoresis. Recently, we have introduced a new electrophoretic technique for concentration/separation of milliliter sample volumes. In this technique, the gel is used primarily as an anticonvection media eliminating liquid flow during the electromigration. While serving well for the liquid stabilization, the gels can undergo deformation when exposed to a discontinuous electrolyte buffer system used in epitachophoresis. In this work, we have explored 3D printing to form rigid stabilizing manifolds to minimize liquid flow during the epitachophoresis run. The whole device was printed using the stereolithography technique from a low water-absorbing resin. The stabilizing manifold, serving as the gel substitute, was printed as a replaceable composite structure preventing electrolyte mixing during the separation. Different geometries of the 3D printed stabilizing manifolds were tested for use in concentrating ionic sample components without spatial separation. The presented device can focus analytes from 3 or 4 mL of the sample to 150 μL or less, depending on the collection cup size. With the 150 μL collection cup, this represents the enrichment factor from 20 to 27. The time of concentration was from 15 to 25 min, depending on stabilization media and power used.

Computer simulation of the enantioselective separation of weak bases in an online capillary electrophoresis based microanalysis configuration comprising sulfated cyclodextrin as selector.

Computer simulation was utilized to characterize the electrophoretic processes occurring after reactant mixing in an online assay format used for monitoring the enantioselective N-demethylation of ketamine to norketamine in the presence of highly sulfated γ-cyclodextrin (HS-γ-CD). The incubated reaction mixture (at pH 7.4 and without chiral selector) is bracketed by a low pH BGE containing 2% HS-γ-CD as chiral selector, thereby forming a discontinuous buffer system. Upon power application, simulation provides insight into the formation of moving boundaries and new zones together with the prediction of the behavior of ketamine and norketamine enantiomers. The analytes first migrate cationically in a zone electrophoretic manner until they come in contact with HS-γ-CD upon which enantioseparation is initiated. Complexation has a focusing effect and the electrophoretic transport becomes reversed, that is, toward the anode. Simulation revealed that the initial conditions for the chiral separation, including buffer components concentrations, pH, and ionic strength, are different than those in the BGE. As a consequence thereof, the experimentally determined complexation parameters for the BGE were unable to correctly describe the migration behavior of the analytes in this column section. An increase in the input binding constants by a factor of two to four, as a result of the decreased ionic strength, resulted in simulation data that agreed with experimental findings.

Insights into head-column field-amplified sample stacking: Part II. Study of the behavior of the electrophoretic system after electrokinetic injection of cationic compounds across a short water plug

Part I on head-column field-amplified sample stacking comprised a detailed study of the electrokinetic injection of a weak base across a short water plug into a phosphate buffer at low pH. The water plug is converted into a low conductive acidic zone and cationic analytes become stacked at the interface between this and a newly formed phosphoric acid zone. The fundamentals of electrokinetic processes occurring thereafter were studied experimentally and with computer simulation and are presented as part II. The configuration analyzed represents a discontinuous buffer system. Computer simulation revealed that the phosphoric acid zone at the plug-buffer interface becomes converted into a migrating phosphate buffer plug which corresponds to the cationically migrating system zone of the phosphate buffer system. Its mobility is higher than that of the analytes such that they migrate behind the system zone in a phosphate buffer comparable to the applied background electrolyte. The temporal behaviour of the current and the conductivity across the water plug were monitored and found to reflect the changes in the low conductivity plug. Determination of the buffer flow in the capillary revealed increased pumping caused by the mismatch of electroosmosis within the low conductivity plug and the buffer. This effect becomes elevated with increasing water plug length. For plug lengths up to 1% of the total column length the flow quickly drops to the electroosmotic flow of the buffer and simulations with experimentally determined current and flow values predict negligible band dispersion and no loss of resolution for both low and large molecular mass components.

Validation of CE modeling with a contactless conductivity array detector.

Dynamic computer simulation data are compared for the first time with CE data obtained with a laboratory made system comprising an array of 8 contactless conductivity detectors (C(4) Ds). The experimental setup featured a 50 μm id linear polyacrylamide (LPA) coated fused-silica capillary of 70 cm length and a purpose built sequential injection analysis manifold for fluid handling of continuous or discontinuous buffer configurations and sample injection. The LPA coated capillary exhibits a low EOF and the manifold allows the placement of the first detector at about 2.7 cm from the sample inlet. Agreement of simulated electropherograms with experimental data was obtained for the migration and separation of cationic and anionic analyte and system zones in CZE configurations in which EOF and other column properties are constant. For configurations with discontinuous buffer systems, including ITP, experimental data obtained with the array detector revealed that the EOF is not constant. Comparison of simulation and experimental data of ITP systems provided the insight that the EOF can be estimated with an ionic strength dependent model similar to that previously used to describe EOF in fused-silica capillaries dynamically double coated with Polybrene and poly(vinylsulfonate). For the LPA coated capillaries, the electroosmotic mobility was determined to be 17-fold smaller compared to the case with the charged double coating. Simulation and array detection provide means for quickly investigating electrophoretic transport and separation properties. Without realistic input parameters, modeling alone is not providing data that match CE results.

Microfluidic Western blotting of low-molecular-mass proteins.

We describe a microfluidic Western blot assay (μWestern) using a Tris tricine discontinuous buffer system suitable for analyses of a wide molecular mass range (6.5–116 kDa). The Tris tricine μWestern is completed in an enclosed, straight glass microfluidic channel housing a photopatterned polyacrylamide gel that incorporates a photoactive benzophenone methacrylamide monomer. Upon brief ultraviolet (UV) light exposure, the hydrogel toggles from molecular sieving for size-based separation to a covalent immobilization scaffold for in situ antibody probing. Electrophoresis controls all assay stages, affording purely electronic operation with no pumps or valves needed for fluid control. Electrophoretic introduction of antibody into and along the molecular sieving gel requires that the probe must traverse through (i) a discontinuous gel interface central to the transient isotachophoresis used to achieve high-performance separations and (ii) the full axial length of the separation gel. In-channel antibody probing of small molecular mass species is especially challenging, since the gel must effectively sieve small proteins while permitting effective probing with large-molecular-mass antibodies. To create a well-controlled gel interface, we introduce a fabrication method that relies on a hydrostatic pressure mismatch between the buffer and polymer precursor solution to eliminate the interfacial pore-size control issues that arise when a polymerizing polymer abuts a nonpolymerizing polymer solution. Combined with a new swept antibody probe plug delivery scheme, the Tris tricine μWestern blot enables 40% higher separation resolution as compared to a Tris glycine system, destacking of proteins down to 6.5 kDa, and a 100-fold better signal-to-noise ratio (SNR) for small pore gels, expanding the range of applicable biological targets.

Migration behaviour of discontinuous buffers in capillary electrophoresis during protein enrichment

Capillary electrophoresis (CE) is not only an effective separation technique, but can also serve as a sample preparation tool for enrichment and purification at sub-microliter sample volumes. Our approach is based on the use of a discontinuous buffer system consisting of an acid and a base (acetate and ammonium). Proteins and/or peptides with isoelectric points between the pH values of these two buffers will become stacked at the neutralization reaction boundary (NRB). To understand the mechanism of the NRB formation and the electrophoretic migration of various ions during the enrichment, we performed experiments using myoglobin and mesityl oxide to reveal the ion migration patterns at the buffer junction, and utilized Simul 5 to computer simulate the process. The simulated results closely resembled the experimental data, and together, they effectively revealed the characteristics of the discontinuous buffers. Importantly, the discovery allowed the manipulation of NRB behaviours by controlling the discontinuous buffer composition. To illustrate this, the removal of urea as an unwanted background molecule from the enriched protein sample was achieved based on the acquired information.

Removal of sample background buffering ions and myoglobin enrichment via a pH junction created by discontinuous buffers in capillary electrophoresis

Traditional CE sample stacking is ineffective for samples containing a high concentration of salt and/or buffer. We recently reported the use of a discontinuous buffer system for protein enrichment that was applicable to samples containing millimolar concentrations of salt. In this paper, the technique was investigated for samples containing unwanted buffering ions, including TRIS, MES, and phosphate, which are commonly used in biological sample preparation. Using myoglobin as a model protein, the results demonstrated that background buffering ions can be effectively removed or separated from the enriched protein. The key is to use either the acid or the base of the discontinuous buffers to adjust the pH of the sample, such that the net charge of the unwanted buffering ions is near-zero. The successful isolation and enrichment of myoglobin from up to 100 mM TRIS and 50 mM MES was demonstrated. The enrichment factors remained at approximately 200. Removal of phosphate was more challenging because its net charge was anionic in both the acid and the base of the discontinuous buffers. The enrichment was only achievable up to 30 mM of sodium phosphate, the enrichment factors observed were significantly lower, below 50, and the process was delayed due to the higher ionic strength resulted from phosphate. The migration of phosphate during enrichment was studied using a UV-absorbing analogue, phenyl phosphate. In addition, Simul 5.0 was used to simulate the discontinuous buffers in the absence and presence of TRIS and phosphate. The stimulated TRIS and phosphate concentration profiles were generally in agreement with the experimental results. The simulation also provided a better understanding on the effect of phosphate on the formation of the pH junction.

Peptide fractionation by acid pH SDS‐free electrophoresis

SDS-free polyacrylamide gel electrophoresis is an effective alternative approach to peptide fractionation. Here we describe a discontinuous buffer system at acid pH that improves the separation of acidic peptides from tryptic digestion. MOPS and chloride act as trailing and leading ions, respectively, in this system, while histidine operates as counterion and buffers all solutions. In these electrophoretic conditions, peptides with pI below 5.5 migrate with low overall electrophoretic mobilities but high differences from one another, which allows for their efficient resolution. In silico analysis of several proteomes shows that the acid pH system allows a peptide simplification of 2.5-fold with respect to the total peptide mixture, and still a proteome coverage of about 95% is achievable. A straightforward method with a protocol including proteomic studies was achieved for SDS-PAGE of proteins, enzyme treatment and further peptide fractionation by SDS-free acid PAGE.

Extraction and Purification of Curcain, a Protease from the Latex of Jatropha curcas Linn

A proteolytic enzyme, curcain, has been extracted from the latex of Jatropha curcas Linn. The enzyme was purified by chromatography on carboxymethyl cellulose and gel filtration on Sephadex G-200. The homogeneity of protein associated with curcain was established by non-denatured polyacrylamide gel electrophoresis using a discontinuous buffer system. The molecular weight of curcain was estimated by Sephadex G-100 gel filtration using a calibration curve of standard proteins to be around 22,000 daltons.

Hexokinase inhibitor screening based on adenosine 5′‐diphosphate determination by electrophoretically mediated microanalysis

A CE-based method for hexokinase inhibitor screening was developed in the present paper. In this method, hexokinase activity was assayed via electrophoretically mediated microanalysis (EMMA), which combines on-column hexokinase-mediated reaction and measurement of produced adenosine 5'-diphosphate (ADP) via electrophoretical separation and UV detection. Enzyme inhibition can be read out directly from the reduced peak area of ADP in comparison with a reference electropherogram obtained in the absence of any inhibitor. Conditions for on-column enzyme reaction and separation of adenosine 5'-triphosphate (ATP) and ADP were optimized. The optimal buffer composition for enzymatic reaction was 25 mM HEPES buffer (pH 7.5) containing 5 mM MgCl(2), whereas the optimal buffer composition for separation was 100 mM Tris-phosphate buffer (pH 5.5) containing 0.02% (m/v) hexadimethrine bromide (HDB). Fortunately, discontinuous buffer system can be adapted easily in the EMMA method. The time for separation was reduced dramatically to less than 3 min by reversing the direction of EOF via dynamically coating the capillary wall with the cationic polyelectrolyte HDB. Moreover, the peak tailing of ATP was also reduced by HDB coating. The Z' factor as high as 0.98 was obtained, indicating a high quality of the screening data. The present method is simple, robust and cost-effective.

Meloidogyne chitwoodi and Meloidogyne fallax

<i>Meloidogyne chitwoodi</i> and <i>Meloidogyne fallax</i>

In-capillary enrichment, proteolysis and separation using capillary electrophoresis with discontinuous buffers: application on proteins with moderately acidic and basic isoelectric points

Advances in mass spectrometry and capillary-format separation continue to improve the sensitivity of protein analysis. Of equal importance is the miniaturization of sample pretreatment such as enrichment and proteolysis. In a previous report (Nesbitt et al., Electrophoresis, 2008, 29, 466-474), nanoliter-volume protein enrichment, tryptic digestion, and partial separation was demonstrated in capillary electrophoresis followed by MALDI mass spectral analysis. A discontinuous buffer system, consisting of ammonium (pH 10) and acetate (pH 4), was used to create a pH junction inside the capillary, trapping a protein with a neutral isoelectric point, myoglobin (pI 7.2). Moreover, co-enrichment of myoglobin with trypsin led to an in-capillary digestion. In this paper, the ability of this discontinuous buffer system to perform similar in-capillary sample pretreatment on proteins with moderately acidic and basic pI was studied and reported. Lentil lectin (pI 8.6) and a multi-phosphorylated protein, beta-casein (pI 5.1), were selected as model proteins. In addition to the previously shown tryptic digestion, proteolysis with endoproteinase Asp-N was also performed. Digestion of these acidic and basic pI proteins produced a few peptides with extreme pI values lying outside the trapping range of the discontinuous buffer. An alteration in the peptide trapping procedure was made to accommodate these analytes. Offline MALDI mass spectral analysis confirmed the presence of the expected peptides. The presented miniaturized sample pretreatment methodology was proven to be applicable on proteins with a moderately wide range of pI. Flexibility in the choice of protease was also evident.

Microfluidic 2-D PAGE using multifunctional in situ polyacrylamide gels and discontinuous buffers

A two-dimensional microfluidic system is presented for intact protein separations combining isoelectric focusing (IEF) and sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis (PAGE) employing in situ photopolymerized polyacrylamide (PAAm) gels. The PAAm gels are used for multiple functions. In addition to serving as a highly-resolving separation medium for gel electrophoresis, discrete polyacrylamide gel plugs are used to enable the efficient isolation of different on-chip media including anolyte, catholyte, and sample/ampholyte solutions for IEF. The gel plugs are demonstrated as on-chip reagent containers, holding defined quantities of SDS for on-chip SDS-protein complexation, and enabling the use of a discontinuous buffer system for sample band sharpening during SDS-PAGE. The 2-D chip also employs several unique design features including an angled isoelectric focusing channel to minimize sample tailing, and backbiasing channels designed to achieve uniform interdimensional sample transfer. Separation results using E. coli cell lysate are presented using a 10-channel chip with and without the discontinuous buffer system, with resolving power more than doubled in the former case. Further improvements in separation resolution are demonstrated using a 20-channel chip design.

Capillary electrophoresis immunoassay using magnetic beads

Protein A-coated magnetic beads (0.3 mum) have been trapped in a small portion of a neutrally coated capillary (50 mum id). Anti-beta-lactoglobulin (beta-LG) antibodies have then been immobilized on the beads through strong affinity with protein A to subsequently capture beta-LG from model or real samples. Once the immunocomplexes formed at physiological pH, a discontinuous buffer system has been used to release the partners and preconcentrate them by transient ITP. The antigens and antibodies have finally been separated by CZE and detected by UV absorbance. An LOQ of 55 nM has been achieved. This methodology has been applied to quantify native beta-LG in pasteurized and ultra-high-temperature-treated bovine milk. All the described procedures, including immunosorbent preparation, sample extraction, cleanup, preconcentration, and separation are completely automated on a commercial CE instrument. As this CE immunoassay method is simple, rapid, selective, and sensitive, it should be a practical and attractive technology for the analysis of complicated biological samples.

Nanoliter‐volume protein enrichment, tryptic digestion, and partial separation based on isoelectric points by CE for MALDI mass spectral analysis

Sequence-specific proteolysis is an important part of protein identification by MS. Digestion of protein is commonly performed in-solution, in sample vials with volumes ranging from milli- to microliters. When digestion is performed with a sample volume below 1 microL, handling of solution and potential sample loss via adsorption become significant issues. In this report, a proof of concept for the digestion of a small volume protein solution inside a capillary was demonstrated using a discontinuous buffer system previously studied (Nesbitt, C. A., et al. J. Chromatogr. A 2005, 1073, 175-180). Upon voltage application, a pH junction was created by the discontinuous buffer. Using myoglobin as an example, the protein molecules were enriched at the junction with an estimated volume of a few nanoliters. A protease, trypsin, was then introduced to myoglobin at the junction by coenrichment to induce in-capillary digestion. The voltage application was then suspended to provide the necessary time (2 h) for the proteolysis to proceed. When completed, voltage application was resumed, and the discontinuous buffer reconcentrated the peptides formed from digestion. Importantly, the refocused peptides appeared to roughly elute according to their pIs, resulting in a partial separation. Direct sample deposition from capillary was performed to facilitate mass spectral analysis by MALDI. The partial separation, according to pI, offered the potential benefits of MALDI MS signal enhancement and provided supplementary pI information for peptide identity assignment.

Phoma tracheiphila

<i>Phoma tracheiphila</i>

Western Blotting Using the Invitrogen NuPage Novex Bis Tris MiniGels

Western Blotting (or immunoblotting) is a standard laboratory procedure allowing investigators to verify the expression of a protein, determine the relative amount of the protein present in different samples, and analyze the results of co-immunoprecipitation experiments. In this method, a target protein is detected with a specific primary antibody in a given sample of tissue homogenate or extract. Protein separation according to molecular weight is achieved using denaturing SDS-PAGE. After transfer to a membrane, the target protein is probed with a specific primary antibody and detected by chemiluminescence. Since its first description, the western-blotting technique has undergone several improvements, including pre-cast gels and user-friendly equipment. In our laboratory, we have chosen to use the commercially available NuPAGE electrophoresis system from Invitrogen. It is an innovative neutral pH, discontinuous SDS-PAGE, pre-cast mini-gel system. This system presents several advantages over the traditional Laemmli technique including: i) a longer shelf life of the pre-cast gels ranging from 8 months to 1 year; ii) a broad separation range of molecular weights from 1 to 400 kDa depending of the type of gel used; and iii) greater versatility (range of acrylamide percentage, the type of gel, and the ionic composition of the running buffer). The procedure described in this video article utilizes the Bis-Tris discontinuous buffer system with 4-12% Bis-Tris gradient gels and MES running buffer, as an illustration of how to perform a western-blot using the Invitrogen NuPAGE electrophoresis system. In our laboratory, we have obtained good and reproducible results for various biochemical applications using this western-blotting method.

Gradient Elution Isotachophoresis for Enrichment and Separation of Biomolecules

A novel format for performing capillary isotachophoresis (ITP) is described -- gradient elution ITP (GEITP). GEITP merges the recently described electrophoretic separation technique of gradient elution moving boundary electrophoresis (GEMBE) with an ITP enrichment step. GEMBE utilizes a combination of continuous sample injection with a pressure-controlled counterflow; as the counterflow is reduced, analytes are sequentially eluted onto the separation column and detected as boundary interfaces. By incorporating leading electrolytes into the counterflow and terminating electrolytes into the sample matrix, an ionic interface can be formed near the capillary inlet. The discontinuous buffer system forms highly enriched analyte zones outside of the capillary, which are then eluted onto the separation capillary as the counterflow is reduced. Separation of fluorescent analytes was achieved either through discrete electrolyte spacers added to the sample or by using ampholyte mixtures to form a continuum of spacers. As the ITP process occurs off-column, extremely short length separations can be achieved, as demonstrated by a separation in 30 microm. The effects of various parameters on the GEITP enrichment process are investigated, including initial counterflow rates, electric field, leading electrolyte concentration, and counterflow acceleration, which is an adjustable parameter allowing for highly flexible separations. Typical enhancements in limits of detection and sensitivity were greater than 10,000-fold and were achieved in less than 2 min, yielding low-picomolar detection limits using arc lamp illumination and low-cost CCD detection. An optimized system afforded greater than 100,000-fold improvement in detection of carboxyfluorescein in 8 min. Specific examples of enrichment and separation demonstrated include the following: small dye molecules, DNA, amino acid mixtures, and protein mixtures.

Discontinuous native protein gel electrophoresis: pros and cons

A new native protein gel system was recently developed that enables the rapid and convenient analysis of virtually all soluble proteins, in particular including basic proteins, in their native oligomeric states. This gel system combines the addition of negative charges to the proteins by the dye SERVA Blue G with a Tris-histidine discontinuous buffer system and the use of polyacrylamide gradient gels. The use of histidine for sample focusing rather than glycine as a slow dipolar ion following from the cathode buffer serves to improve migration of basic proteins. In this review, the principle of function as well as the advantages and disadvantages of the new gel system are discussed in the context of other native protein gel systems and further methods for the analysis of the oligomeric state of a protein.