Directional Migration Research Articles

Interregional Migration of Youth in the Russian Federation

The subject of the study is interregional migration of young people in the Russian Federation during the period of obtaining higher education; The topic of the study is the change in the migration attractiveness of regions for higher education; research hypothesis: there has been a change in the centers of gravity of migration flows and the status of regions from 2017 to 2020 and 2023 due to the impact of the pandemic and government measures to increase the attractiveness of universities in the regions. Source data includes official government statistics for the period from 2017 to 2023. The article identifies limitations on the use of this source (migration of 18-year-olds and migration of 21-year-olds is not identical to direct and return educational migration) and formulates a thesis about the need to use aggregated data of «digital traces» of applicants and graduates and federal information systems. An assessment of changes in the status of regions for 2017, 2020 and 2023 was carried out. The study makes assumptions about the possibility of using tools for objective monitoring of interregional educational migration of applicants to improve the work of universities. It is necessary to concentrate the efforts of the regional authorities of the «donor» region and the regional university community on first obtaining «transit» status for the university and the region, followed by transition to the «acceptor» category. For 2017, the author identified 12 «acceptor» territories, 59 «donor territories» (the rest were mixed and intermediate forms). In 2020, there were only 30 «donors», 12 «acceptors», 37– they reached conditional «balance» positions– this is how the COVID-2019 pandemic affected interregional migration. In 2023, there were 12 «acceptors» in the Russian Federation (the list has changed slightly), the number of «donors» was 46, 21 territories reached a «balance» state, the rest still belong to intermediate types.

Water–carbon–economy multivariate spatial–temporal collaborative relationships and nonlinear projections in urban agglomerations

A complex dynamic coupling process exists among water resource consumption, carbon emissions, and economic growth; however, their intricate collaborative mechanisms remain unclear. This study proposes a new barycenter formula-based multivariate spatial–temporal collaborative relationship model for identifying the complex relationships and interactions among the water footprint (WF), carbon footprint (CF), and gross domestic product (GDP) in the three largest urban agglomerations in the Yangtze River Economic Belt (YREB) of China. A nonlinear grey Bernoulli model is then advanced for illustrating the future evolution in WF–CF–GDP and their multivariate collaborative relationship. Results reveal that WF and CF of all urban agglomerations increase continuously, with annual growth rates of 0.59% and 5.63%, respectively. WF, CF, and GDP are significantly positively correlated, and they exhibit similar spatial clustering characteristics and centroid migration directions along the main course of the Yangtze River. Moreover, their multivariate temporal collaborative relationship (0.79) significantly surpasses their spatial (0.63), while the spatial–temporal (0.77) is intermediate. WF has the greatest impact on the binary spatial–temporal collaborative relationship between CF and GDP. In contrast, GDP has the least impact on the relationship between CF and WF. The projected WF, CF, and GDP indicate that the YREB will face more severe water and carbon pressures as its economy grows. Their multivariate spatial–temporal collaborative relationships are projected to decrease by 10.26% in 2050. These findings contribute to promoting collaborative and sustainable development of inter-regional socio-economic and ecological environment.

Using benzonaphthothiophenes to trace paleo-oil migration directions in the Ediacaran-Cambrian reservoirs of the central Sichuan Basin

Benzonaphthothiophenes (BNTs) are important organosulfur compounds in oil, and their concentrations and [2,1]/([2,1] + [1,2])BNT ratio have been used as migration tracers. Here we focus on the applicability of BNTs as migration tracers for abnormally heat-altered paleo-oil reservoirs. For this purpose, 57 pyrobitumen samples from the Ediacaran to Cambrian dolomite reservoirs in the central Sichuan Basin were collected and detected by gas chromatography-mass spectrometry. The results showed that most pyrobitumens of the studied samples are characterized by high concentrations of unsubstituted polycyclic aromatic hydrocarbons (PAHs), high values of fluoranthene/PAHs, pyrene/PAHs, fluoranthene/(fluoranthene + pyrene), benzofluoranthene/(benzofluoranthene + benzopyrene), and unsubstituted-to-methylated aromatic ratios due to the alteration by abnormal heating. These pyrobitumens have high concentrations of BNTs, and their three isomers show a pattern of [2,1] > [1,2] > [2,3]BNT. The BNTs concentrations display a good positive relationship with the concentrations of the abnormal heating-related PAH, while [2,1]/([2,1] + [1,2])BNT ratio has no correlation with the abnormal heating-related indices, suggesting that abnormal heating of the paleo-oil reservoirs lead to the enrichment of BNTs but has a limited effect on [2,1]/([2,1] + [1,2])BNT ratio. Moreover, [2,1]/([2,1] + [1,2])BNT ratio seem to be not affected by kerogen type and depositional environment, but increases with source rock maturity. Therefore, the [2,1]/([2,1]+[1,2])BNT is still an effective migration tracer for abnormally heated reservoirs. This ratio was applied as migration tracer in the studied area. The result suggests that the paleo-oil primarily migrated from west depression to east bulges, followed by the direction from northwest to southeast, which is congruent with the geological setting and exploration practice, demonstrating the applicability of this parameter for abnormally heat-altered oil reservoirs.

Galvanin is an electric-field sensor for directed cell migration.

Directed cell migration is critical for the rapid response of immune cells, such as neutrophils, following tissue injury or infection. Endogenous electric fields, generated by the disruption of the transepithelial potential across the skin, help to guide the movement of immune and skin cells toward the wound site. However, the mechanisms by which cells sense these physical cues remain largely unknown. Through a CRISPR-based screen, we identified Galvanin, a previously uncharacterized single-pass transmembrane protein that is required for human neutrophils to change their direction of migration in response to an applied electric field. Our results indicate that Galvanin rapidly relocalizes to the anodal side of a cell on exposure to an electric field, and that the net charge on its extracellular domain is necessary and sufficient to drive this relocalization. The spatial pattern of neutrophil protrusion and retraction changes immediately upon Galvanin relocalization, suggesting that it acts as a direct sensor of the electric field that then transduces spatial information about a cell's electrical environment to the migratory apparatus. The apparent mechanism of cell steering by sensor relocalization represents a new paradigm for directed cell migration.

Coupling defect-inherent built-in electric fields to promote directional charge migration for rapid photocatalytic degradation of levofloxacin

By enhancing the intrinsic built-in electric field (IEF) of the catalyst through defect engineering, and coupling the IEF of the catalyst via an S-type heterojunction structure, a 3-in-1 IEF is formed, which drives the directional migration of electrons and holes, and can effectively improve photocatalytic performance. In this paper, an oxygen vacancy-type Bi2WO6 (Ov-BWO) composite with twin-type Zn0.5Cd0.5S (ZCS) was synthesized to construct an S-scheme heterojunction. The twin structure results in an IEF in ZCS that points from the twin plane Zn to the twin boundary S. The oxygen vacancies, on the other hand, create an internal electric field from Bi and W to O by altering the local charge density. By coupling the IEF of the catalyst through the S-type heterojunction, an enhanced IEF is formed, pointing from the twin plane Zn to the O in Ov-BWO, enabling rapid directional migration of photogenerated charge carriers. Furthermore, potential Levofloxacin (LVFX) intermediates and degradation pathways were found by combining Liquid chromatography-mass spectrometry (LC-MS) data with Density Functional Theory (DFT) simulations. This study systematically elucidates the photocatalytic degradation system, from catalyst design to the degradation process of pollutants, through the analysis of theoretical calculations and experimental results.

Quantum Chemical Calculation on ScCl3-NaCl-KCl Molten Salt System

Background: The study of the ionic structure of the ScCl3-NaCl-KCl molten salt system is of guiding significance for the production of metal Sc and Sc alloy by molten salt electrolysis using ScCl3-NaCl-KCl molten salt system as electrolyte. However, limited research has been conducted on the structural analysis of molten salt within this system using Raman spectroscopy. Methods: The Gaussian and GaussView programs are used to simulate Sc-Cl ionic groups that may exist in the ScCl3-NaCl-KCl molten salt system based on density functional theory (DFT) and calculate their theoretical Raman spectra. Then, the wave function analysis of these Sc-Cl ionic groups is carried out using the Multiwfn program. Results: When the ScCl3-NaCl-KCl system is used as the electrolyte, it is considered that the 8 Sc atom in ScCl74− ionic groups is most easily reduced by electrochemistry at the cathode when the concentrations of eight Sc-Cl ionic groups are the same. In Sc2Cl7− Sc2Cl82− and Sc2Cl93− ionic groups, the sites that are most likely to attract electrophiles to attack and react are 1Cl and 7Cl, respectively, and the two Sc atoms located in the "chlorine bridge" structure contribute the most to LUMO orbitals, and nucleophiles will preferentially attack the Sc atoms located in the "chlorine bridge" structure. For Sc2Cl7−、Sc2Cl82− and Sc2Cl93− ionic groups, which have two Sc atoms, the bonds formed between Sc and Cl in the "chlorine bridge" structure have the smallest bond order, so the bonds formed by Sc and Cl in the "chlorine bridge" structure break first during the reaction, and then the bond formed by Sc and Cl located at both ends of the whole structure breaks Conclusion: The key information, such as bond length, point group structure, and theoretical Raman spectral characteristic peak after optimization, are obtained by the Gaussian and GaussView programs. The net atomic charge in each ionic group, the direction of electron migration during the formation of the ionic groups, the sites where electrophilic and nucleophilic reactions are most likely to occur in each ionic group, and the order of bond breaking during chemical reactions are obtained by the Multiwfn program.

Protrusion force and cell-cell adhesion play a critical role in collective tumor cluster migration.

While collective migration is shown to enhance invasive and metastatic potential in cancer, the mechanisms driving this behavior and regulating tumor migration plasticity remain poorly understood. This study provides a mechanistic framework explaining the emergence of different modes of collective migration under hypoxia-induced secretome. We focus on the interplay between cellular protrusion force and cell-cell adhesion using collectively migrating three-dimensional microtumors as models with well-defined microenvironment. Large microtumors show directional migration due to intrinsic hypoxia, while small microtumors exhibit radial migration in response to hypoxic secretome. Here, we developed the minimal multi-scale microtumor model (MSMM) to elucidate underlying mechanisms. We identified distinct migration modes within specific regions of protrusion force and cell-cell adhesion parameter space. We show that sufficient cellular protrusion force is crucial for both, radial and directional collective microtumor migration. Radial migration emerges when sufficient cellular protrusion force is generated, driving neighboring cells to move collectively in diverse directions. Within migrating tumors, strong cell-cell adhesion enhances the alignment of cell polarity, breaking the symmetric angular distribution of protrusion forces, and leading to directional microtumor migration. The integrated results from the experimental and computational models provide fundamental insights into collective migration in response to different microenvironment stimuli.

Organized labour migration of residents of Lithuania to the USSR in the sixth–ninth decades of the 20th century

Referring to archive and historiographic materials, in this paper problematics of labour migration to the USSR from Lithuania in 1953-1984 is analysed. Attention is drawn to migration directions, motivation of residents, quantitative indices, territorial aspects related to persons participating in labour migration process and social picture. Residents of Lithuania became participants of the campaign for organized all Soviet Union-wide labour force migration to participate in implementation of large and important land, forestry and industry projects. By the way, the residents of our Republic joined this campaign later than residents from other Republics – in 1953 only. Organized labour force migration from Lithuania to the USSR was of lower level that it had been planned in Moscow. The main directions of labour force migration were: 1) agriculture intensification program (virgin lands campaigns in Kazakhstan and Russia); 2) Russian forestry development program; 3) program of construction of gigantic transport and industrial objects in Russia (Siberia, etc.); 4) the “Third Semester” program – season-based works of students in industry and agriculture sectors of Russia, Kyrgyzstan, Uzbekistan and other Soviet Republics. In 6th-9th decades of the 20th century, about 75 thousand residents of Lithuanian Soviet Socialist Republic were sent to work in other regions of the Soviet Union; labour migrants worked on industrial objects, farms and forestry units. Mostly, they were men from urban areas, by ethnic composition – Russians and Lithuanians. The most intensive time period of sending to work as labour migrants was the 1953-1965 period, as at that time in Kazakhstan and Russia huge programs of economic development had been implemented (virgin lands campaign, forestry development). Namely during this period, over 80 per cent of residents of Lithuania who participated in this campaign were sent to labour destinations. Although in later years the migration campaign covered entire Lithuania, its scale diminished markedly. Due to certain national traits of Lithuanians (sedentary life, attachment to the land) and social-economic situation in the Lithuanian Soviet Socialist Republic (fast and intensive industry development ensuring quite good wages, well-developed social infrastructure, etc.), the residents of Lithuania liked to conclude short-term employment agreements, and after termination of these agreements made efforts to return to Lithuania and stay there not attracted by labour migration campaign anymore.

Visualization Experimental Investigation on Flow Regulation and Oil Displacement Characteristics of Gel Foam in Fractured-Vuggy Carbonate Reservoirs.

Fractured-vuggy reservoirs experience severe channeling during water and gas injection operations, and conventional foam shows weak regeneration capabilities in large-scale fracture spaces, thus failing to effectively seal them. Gel foam combines the advantages of both foam and gel, significantly enhancing the foam's stability and showing good suitability in fractured-vuggy reservoirs. In this article, the plugging and flow regulation properties of gel foam in fractures were studied through fracture displacement experiments. The dynamic plugging capability of gel foam was superior to that of ordinary foam, and its plugging effect was significantly influenced by the fracture opening. Gel foam had strong retention capacity in fractures, and after plugging large-opening fractures, the diversion rate of small-opening fractures was increased by at least 83.3 times during subsequent parallel water flooding, making the flow regulation effect remarkable. Through the oil displacement experiments in typical fractured-vuggy models, the profile control law and enhanced oil recovery performance of gel foam under different fractured-vuggy structures were studied. In the regular fractured-vuggy network, gel foam adhered to occupy the fractured-vuggy space for plugging and controlled the top gas migration direction to synergistically drive the recovery of remaining oil, ultimately achieving a recovery of 95%. In the combination of fractures and irregular vugs, due to the density, gel foam continuously pushed down and right along the fractures to the vugs, pushing the crude oil and formation water in the vugs to migrate to the production well. The recovery of the gel foam flooding stage was as high as 48%, and the final recovery reached 93.5; only a small amount of shielded remaining oil was difficult to drive. The research results are of great significance to the application of gel foam in enhancing oil recovery in fractured-vuggy reservoirs.

Lamellipodia-Mediated Osteoblast Haptotaxis Guided by Fibronectin Ligand Concentrations on a Multiplex Chip.

Skull morphogenesis is a complex, dynamic process involving two different germ layers and progressing to the coordinated, directional growth of individual bones. The mechanisms underlying directional growth toward the apex are not completely understood. Here, a microfluidic chip-based approach is utilized to test whether calvarial osteoblast progenitors undergo haptotaxis on a gradient of Fibronectin1 (FN1) via lamellipodia. Mimicking the embryonic cranial mesenchyme's FN1 pattern, FN1 gradients is established in the chip using computer modeling and fluorescent labeling. Primary mouse calvarial osteoblast progenitors are plated in the chip along an array of segmented gradients of adsorbed FN1. The study performs single-cell tracking and measures protrusive activity. Haptotaxis is observed at an intermediate FN1 concentration, with an average directional migration index (yFMI) of 0.07, showing a significant increase compared to the control average yFMI of -0.01. A significant increase in protrusive activity is observed during haptotaxis. Haptotaxis is an Arp2/3-dependent, lamellipodia-mediated process. Calvarial osteoblast progenitors treated with the Arp2/3 (Actin Related Protein 2/3 complex) inhibitor CK666 show significantly diminished haptotaxis, with an average yFMI of 0.01. Together, these results demonstrate haptotaxis on an FN1 gradient as a new mechanism in the apical expansion of calvarial osteoblast progenitors during development and shed light on the etiology of calvarial defects.

Boosting the photocatalytic decontamination efficiency using a supramolecular photoenzyme ensemble.

Continuous industrialization has raised daunting environmental concerns, and there is an urgent need to develop a sustainable strategy to tackle the contamination issues. Here, we report a supramolecular photoenzyme ensemble enabling the harvest of solar energy to remove contaminations in water. The well-sourced oxidoreductase, laccase, is confined into a photoactive hydrogen-bonded organic framework (PHOF) through an in situ encapsulation method. The direct electron migration between the oxidation center in a PHOF and the reduction center in laccase facilitates synergistic photoenzyme-coupled catalysis, showing two orders of magnitude higher activity than free laccase for pollutant degradation under visible light, without the need for sacrificial agents or costly co-mediators. Such high decontamination efficiency also surpasses the reported catalysts. The structure and decontamination function of this supramolecular photoenzyme ensemble remain highly stable in complex environment matrices, presenting desirable reusability and almost 100% conversion efficiency of pollutants for real sewage samples. Our conceptual photoenzyme hybrid catalyst offers important insights into green and sustainable water decontamination.

Use microfluidics to study cell migration in response to fluid shear stress gradients

Cells respond not only to biological regulatory factors but also to physical stimuli such as electric fields, light, and shear stress in their environment. These stimuli can lead to cell migration and morphological changes. In the human body, cells encounter fluid shear stress induced by interstitial flow, lymphatic flow, blood flow, or organ-specific conditions within their micro-environments. Therefore, fluid shear stress, a classic mechanical force, has gained significant attention in wound healing and cancer metastasis. In this study, a microfluidic chip was developed to both culture cells and generate a shear stress gradient to direct cell migration. The design of this device’s geometry allows the generation of a shear stress gradient perpendicular to the direction of medium flow. This greatly eliminates the influence of flow-induced cell responses. Using mouse fibroblast cells (NIH3T3) and human lung cancer cells (CL1-5) as models, their migration directionality, migration rates, and alignment in response to the shear stress gradient were investigated. Within the stress range of 0.095–0.155 Pa and a gradient of 0.015 Pa/mm, NIH3T3 cells did not exhibit significant directional migration, differences in migration rates, or specific alignment patterns. In contrast, CL1-5 cells preferred higher shear stress environments and alignment parallel to the medium flow, suggesting that these conditions could induce higher mobility in these cancer cells.

Dependence of Protein Immobilization and Photocurrent Generation in PSI-FTO Electrodes on the Electrodeposition Parameters.

This study investigates the immobilization of cyanobacterial photosystem I (PSI) from Synechocystis sp. PCC 6803 onto fluorine-doped tin oxide (FTO) conducting glass plates to create photoelectrodes for biohybrid solar cells. The fabrication of these PSI-FTO photoelectrodes is based on two immobilization processes: rapid electrodeposition driven by an external electric field and slower adsorption during solvent evaporation, both influenced by gravitational sedimentation. Deposition and performance of photoelectrodes was investigated by UV-Vis absorption spectroscopy and photocurrent measurements. We investigated the efficiency of PSI immobilization under varying conditions, including solution pH, applied electric field intensity and duration, and electrode polarization, with the goals to control (1) the direction of migration and (2) the orientation of the PSI particles on the substrate surface. Variation in the pH value of the PSI solution alters the surface charge distribution, affecting the net charge and the electric dipole moment of these proteins. Results showed PSI migration to the positively charged electrode at pH 6, 7, and 8, and to the negatively charged electrode at pH 4.4 and 5, suggesting an isoelectric point of PSI between 5 and 6. At acidic pH, the electrophoretic migration was largely hindered by protein aggregation. Notably, photocurrent generation was consistently cathodic and correlated with PSI layer thickness, and no conclusions can be drawn on the orientation of the immobilized proteins. Overall, these findings suggest mediated electron transfer from FTO to PSI by the used electrolyte containing 10 mM sodium ascorbate and 200 μM dichlorophenolindophenol.

SRSF2 is a key player in orchestrating the directional migration and differentiation of MyoD progenitors during skeletal muscle development

SRSF2 plays a dual role, functioning both as a transcriptional regulator and a key player in alternative splicing. The absence of Srsf2 in MyoD + progenitors resulted in perinatal mortality in mice, accompanied by severe skeletal muscle defects. SRSF2 deficiency disrupts the directional migration of MyoD progenitors, causing them to disperse into both muscle and non-muscle regions. Single-cell RNA-sequencing analysis revealed significant alterations in Srsf2-deficient myoblasts, including a reduction in extracellular matrix components, diminished expression of genes involved in ameboid-type cell migration and cytoskeleton organization, mitosis irregularities, and premature differentiation. Notably, one of the targets regulated by Srsf2 is the serine/threonine kinase Aurka. Knockdown of Aurka led to reduced cell proliferation, disrupted cytoskeleton, and impaired differentiation, reflecting the effects seen with Srsf2 knockdown. Crucially, the introduction of exogenous Aurka in Srsf2-knockdown cells markedly alleviated the differentiation defects caused by Srsf2 knockdown. Furthermore, our research unveiled the role of Srsf2 in controlling alternative splicing within genes associated with human skeletal muscle diseases, such as BIN1, DMPK, FHL1, and LDB3. Specifically, the precise knockdown of the Bin1 exon17-containing variant, which is excluded following Srsf2 depletion, profoundly disrupted C2C12 cell differentiation. In summary, our study offers valuable insights into the role of SRSF2 in governing MyoD progenitors to specific muscle regions, thereby controlling their differentiation through the regulation of targeted genes and alternative splicing during skeletal muscle development.

SRSF2 is a key player in orchestrating the directional migration and differentiation of MyoD progenitors during skeletal muscle development.

SRSF2 plays a dual role, functioning both as a transcriptional regulator and a key player in alternative splicing. The absence of Srsf2 in MyoD + progenitors resulted in perinatal mortality in mice, accompanied by severe skeletal muscle defects. SRSF2 deficiency disrupts the directional migration of MyoD progenitors, causing them to disperse into both muscle and non-muscle regions. Single-cell RNA-sequencing analysis revealed significant alterations in Srsf2-deficient myoblasts, including a reduction in extracellular matrix components, diminished expression of genes involved in ameboid-type cell migration and cytoskeleton organization, mitosis irregularities, and premature differentiation. Notably, one of the targets regulated by Srsf2 is the serine/threonine kinase Aurka. Knockdown of Aurka led to reduced cell proliferation, disrupted cytoskeleton, and impaired differentiation, reflecting the effects seen with Srsf2 knockdown. Crucially, the introduction of exogenous Aurka in Srsf2-knockdown cells markedly alleviated the differentiation defects caused by Srsf2 knockdown. Furthermore, our research unveiled the role of Srsf2 in controlling alternative splicing within genes associated with human skeletal muscle diseases, such as BIN1, DMPK, FHL1, and LDB3. Specifically, the precise knockdown of the Bin1 exon17-containing variant, which is excluded following Srsf2 depletion, profoundly disrupted C2C12 cell differentiation. In summary, our study offers valuable insights into the role of SRSF2 in governing MyoD progenitors to specific muscle regions, thereby controlling their differentiation through the regulation of targeted genes and alternative splicing during skeletal muscle development.

Beyond the Needle: Understanding Tissue Marker Migration in Breast MRI-Guided Biopsies.

To evaluate the frequency and factors associated with clip migration in MRI-guided breast biopsies. This study was approved by our Institutional Review Board and was compliant with HIPAA. We retrospectively evaluated all MRI-guided biopsies performed between January 2013 and December 2020 in our institution for clip migration. Only patients with follow-up breast MRI showing the clip were included in the study. Migration was defined as movement of the clip of 10mm or more from the target lesion. Migration frequency and directions were recorded. Factors associated with clip migration were analyzed using statistical tests as appropriate. A total of 291 biopsies in 268 women were included in the study with 31 migration events recorded (11%; 95% CI, 7%-15%). All migrations occurred along the biopsy tract; 97% (30/31) of them displaced distal to the needle entry site. More than 50% regional fat (around the target lesion) was the strongest factor associated with migration, seen in 21/141 women (15%), compared to 10/150 (7%) with 50% or less local fat (P = .023). Global fatty breast was more loosely associated with migration, showing borderline significance (P = .06). Other factors did not correlate with clip migration, including lesion size, depth, or location; pathology result; breast thickness; or biopsy approach. Although clip migration after breast MRI-guided biopsy is an uncommon event, it occurs more often when the target lesion is surrounded by fat, with the clip usually displaced away from the needle entry site.

Dipole field as charge-transfer bridge between Cu atomic clusters/PtCu alloy nanocubes and nitrogen-rich C3N5 for superior photocatalytic hydrogen evolution

Utilizing spontaneous polarization field to harness charge transfer kinetics is a promising strategy to boost photocatalytic performance. Herein, a novel Cu atom clusters/PtCu alloy nanocubes coloaded on nitrogen-rich triazole-based C3N5 (PtCu-C3N5) with dipole field was constructed through facile photo-deposition and impregnation method. The dipole field-drive spontaneous polarization in C3N5 acts as a charge-transfer bridge to promote directional electron migration from C3N5 to Cu atom clusters/PtCu alloy. Through the synergistic effects between Cu atom clusters, PtCu alloy and dipole field in C3N5, the optimized Pt2Cu3-C3N5 achieved a record-high performance with H2 formation rate of 4090.4 μmol g−1 h−1 under visible light, about 154.4-fold increase compared with pristine C3N5 (26.5 μmol g−1 h−1). Moreover, the apparent quantum efficiency was up to 25.33 % at 320 nm, which is greatly superior than most previous related-works. The directional charge transfer mechanism was analyzed in detail through various characterizations and DFT calculations. This work offers a novel pathway to construct high-efficiency multi-metal photocatalysts for solar energy conversion.

Patterning Bacterial Cells on Quasi‐Liquid Surfaces for Biofilm Morphological Control

AbstractBacterial cells within biofilms exhibit resistance to antibiotics, presenting persistent health risks. Current approaches to inhibit biofilm formation have limitations due to their poor biofilm morphological control. For instance, bactericidal surfaces suffer from the accumulation of dead cells that compromise their antibacterial efficacy, and existing antifouling surfaces fail to inhibit biofilm formation. In this work, exceptional biofilm suppression is achieved on quasi‐liquid surfaces (QLS) with patterned surface chemistry where live bacterial cells are guided from slippery to sticky patterned destinations. These surfaces consist of 50 µm slippery and 10 µm sticky stripes. Live bacterial cells are directed to congregate on the sticky patterns, resulting in reduced biofilm biomass and surface coverage compared to uniform slippery surfaces. The patterned biofilm produces sparser extracellular matrix, thus reducing the barrier for antibiotic penetration and treatment. The innovative approach to direct cell migration on patterned QLS represents a promising strategy for inhibiting biofilm formation and combating biofilm‐associated infections.

Design and Evaluation of Controller-Based Raycasting Methods for Efficient Alphanumeric and Special Character Entry in Virtual Reality.

Alphanumeric and special characters are essential during text entry. Text entry in virtual reality (VR) is usually performed on a virtual Qwerty keyboard to minimize the need to learn new layouts. As such, entering capitals, symbols, and numbers in VR is often a direct migration from a physical/touchscreen Qwerty keyboard-that is, using the mode-switching keys to switch between different types of characters and symbols. However, there are inherent differences between a keyboard in VR and a physical/touchscreen keyboard, and as such, a direct adaptation of mode-switching via switch keys may not be suitable for VR. The high flexibility afforded by VR opens up more possibilities for entering alphanumeric and special characters using the Qwerty layout. In this work, we designed two controller-based raycasting text entry methods for alphanumeric and special characters input (Layer-ButtonSwitch and Key-ButtonSwitch) and compared them with two other methods (Standard Qwerty Keyboard and Layer-PointSwitch) that were derived from physical and soft Qwerty keyboards. We explored the performance and user preference of these four methods via two user studies (one short-term and one prolonged use), where participants were instructed to input text containing alphanumeric and special characters. Our results show that Layer-ButtonSwitch led to the highest statistically significant performance, followed by Key-ButtonSwitch and Standard Qwerty Keyboard, while Layer-PointSwitch had the slowest speed. With continuous practice, participants' performance using Key-ButtonSwitch reached that of Layer-ButtonSwitch. Further, the results show that the key-level layout used in Key-ButtonSwitch led users to parallel mode switching and character input operations because this layout showed all characters on one layer. We distill three recommendations from the results that can help guide the design of text entry techniques for alphanumeric and special characters in VR.

Elastic interactions compete with persistent cell motility to drive durotaxis

Many animal cells that crawl on extracellular substrates exhibit durotaxis, i.e., directed migration toward stiffer substrate regions. This has implications in several biological processes including tissue development and tumor progression. Here, we introduce a phenomenological model for single-cell durotaxis that incorporates both elastic deformation-mediated cell-substrate interactions and the stochasticity of cell migration. Our model is motivated by a key observation in an early demonstration of durotaxis: a single, contractile cell at a sharp interface between a softer and a stiffer region of an elastic substrate reorients and migrates toward the stiffer region. We model migrating cells as self-propelling, persistently motile agents that exert contractile traction forces on their elastic substrate. The resulting substrate deformations induce elastic interactions with mechanical boundaries, captured by an elastic potential. The dynamics is determined by two crucial parameters: the strength of the cellular traction-induced boundary elastic interaction (A), and the persistence of cell motility (Pe). Elastic forces and torques resulting from the potential orient cells perpendicular (parallel) to the boundary and accumulate (deplete) them at the clamped (free) boundary. Thus, a clamped boundary induces an attractive potential that drives durotaxis, while a free boundary induces a repulsive potential that prevents antidurotaxis. By quantifying the steady-state position and orientation probability densities, we show how the extent of accumulation (depletion) depends on the strength of the elastic potential and motility. We compare and contrast crawling cells with biological microswimmers and other synthetic active particles, where accumulation at confining boundaries is well known. We define metrics quantifying boundary accumulation and durotaxis, and present a phase diagram that identifies three possible regimes: durotaxis, and adurotaxis with and without motility-induced accumulation at the boundary. Overall, our model predicts how durotaxis depends on cell contractility and motility, successfully explains some previous observations, and provides testable predictions to guide future experiments.