Direct Release Research Articles

Single-Photon Deep-Red Light-Triggered Direct Release of an Anticancer Drug: An Investigative Tumor Regression Study on a Breast Cancer Spheroidal Tumor Model.

Breast adenocarcinoma ranks high among the foremost lethal cancers affecting women globally, with its triple-negative subtype posing the greatest challenge due to its aggressiveness and resistance to treatment. To enhance survivorship and patients' quality of life, exploring advanced therapeutic approaches beyond conventional chemotherapies is imperative. To address this, innovative nanoscale drug delivery systems have been developed, offering precise, localized, and stimuli-triggered release of anticancer agents. Here, we present perylenemonoimide nanoparticle-based vehicles engineered for deep-red light activation, enabling direct chlorambucil release. Synthesized via the reprecipitation technique, these nanoparticles were thoroughly characterized. Light-induced drug release was monitored via spectroscopic and reverse-phase HPLC. The efficacy of the said drug delivery system was evaluated in both two-dimensional and three-dimensional spheroidal cancer models, demonstrating significant tumor regression attributed to apoptotic cell death induced by efficient drug release within cells and spheroids. This approach holds promise for advancing targeted breast cancer therapy, enhancing treatment efficacy and minimizing adverse effects.

Fabrication, machining (dry vs. cryogenic) and life cycle analysis of hybrid titanium composite laminates (HTCL)

Titanium-based fiber metal laminates, also known as hybrid titanium composite laminates (HTCL), are new-age potential materials used in the field of supersonic and high-speed passenger aircraft due to their better corrosion resistance, higher stiffness, fatigue and impact resistance at both elevated and room temperature. However, the difficult-to-machine nature mandates using effective but sustainable coolant during machining. Therefore, in the present study, drilling of HTCL is done in a dry and cryogenic LCO2 environment, considering various responses such as thrust force, torque, surface roughness, tool wear, chip analysis, power consumption and specific cutting energy. Further, a life-cycle analysis was carried out to evaluate the impacts of these two cutting conditions. The results indicate that cryogenic cooling improved the hole surface finish (up to 25%) by reducing the torque values significantly by 25–30%. Furthermore, tool life is improved (up to 48.6%), and power consumption is reduced (up to 13.3%). These outcomes make cryogenic with LCO2 more favorable to use over dry conditions for this novel material. Nevertheless, condensing CO2 into liquid form necessitates a higher consumption of energy and natural resources. Furthermore, its direct release into the environment results in environmental impacts (up to 17–20%) compared to dry machining.

Apigenin inhibits tumor angiogenesis by hindering microvesicle biogenesis via ARHGEF1

Extracellular vesicles are essential for intercellular communication and are involved in tumor progression. Inhibiting the direct release of extracellular vesicles seems to be an effective strategy in inhibiting tumor progression, but lacks of investigation. Here, we report a natural flavonoid compound, apigenin, could significantly inhibit the growth of hepatocellular carcinoma by preventing microvesicle secretion. Mechanistically, apigenin primarily targets the guanine nucleotide exchange factor ARHGEF1, inhibiting the activity of small G protein Cdc42, which is essential in regulating the release of microvesicles from tumor cells. In turn, this inhibits tumor angiogenesis related to VEGF90K transported on microvesicles, ultimately impeding tumor progression. Collectively, these findings highlight the therapeutic potential of apigenin and shed light on its anticancer mechanisms through inhibiting microvesicle biogenesis, providing a solid foundation for the refinement and practical application of apigenin.

Association mapping of septoria tritici blotch resistance in bread wheat in Bale and Arsi highlands, Ethiopia

Septoria tritici blotch (STB) caused by the fungal pathogen Zymoseptoria tritici, anamorph Septoria tritici Rob. ex Desm., is an important wheat pathogen worldwide, reported to be major wheat production threating factor, posing considerable yield loss every year. Developing resistant cultivars is an efficient, economical, environmentally friendly and simple approach for managing STB. This study was carried out to evaluate spring bread wheat lines for their reaction to STB disease under field conditions; to associate phenotypic and genotypic data for identification of STB disease resistance; and to identify genomic region(s) associated with resistance to STB in spring bread wheat lines. Two hundred forty (240) spring bread wheat lines were evaluated under field conditions in non-replicated trials, using an augmented design. The trials were conducted at three locations (Kulumsa Agricultural Research Center, Madda Walabu University Research Site and Sinana Agricultural Research Center) in 2017 main cropping season (July to December). Out of these 240 wheat lines, 123 of them were genotyped with 10263 single nucleotide polymorphism (SNPs) markers and population structure and association mapping analysis was done. The wheat lines showed significant variations in percentage disease severity and area under the disease progress curve at all the three locations they were evaluated. The wheat lines were classified as resistant, moderately resistant, moderately susceptible and susceptible based on the percentage disease severity scored. Five wheat lines were found to be resistant to STB in all the three locations and are recommended for direct release by the national program and parentage purposes in wheat breeding programs. The 123 wheat lines were clustered into 3 subpopulations in which the first cluster contained 99 wheat lines; the second 17 and the last one 7. Among the polymorphic 8127 SNPs markers, 26 markers on chromosomes 7B, 1D, 3A, 2B, 6B and 3D were found to be significantly (P < 0.001) associated with STB resistance so that they can be utilized for marker assisted selection and gene pyramiding in resistance breeding programs.

Selective transmembrane transport of iodide based on electrochemically induced iodide-trap BiOI/MWCNTs/PVA composite membrane

An electrochemically induced bismuth iodine oxide/multiwalled carbon nanotubes/polyvinyl alcohol (BiOI/MWCNTs/PVA) composite membrane electrode with iodide ion trap (I−-trap) was fabricated by prerelease of I− under reduction potential. The I−-trap BiOI/MWCNTs/PVA composite membrane with unique lattice confinement structures was used for the selective extraction of I− in an electrochemically switched ion permselective (ESIP) process. In the ESIP system, the direct uptake and release of I− were realized by applying a cell voltage-pulse potential (CV-PP) coupling circuit on the membranes to switch the oxidation/reduction state. The I−-trap BiOI/MWCNTs/PVA composite membrane exhibited a maximum flux of 8.32 mg·m−2·min−1 and superior electrochemical stability. The separation factors of I−/Br−, I−/Cl−, I−/NO3−, and I−/SO42−in the mixed solutions were 2.67, 3.71, 3.82, and 6.70 respectively. Therefore, such a novel I−-trap BiOI/MWCNTs/PVA composite membrane could be used in the ESIP system for the selective extraction of I− ions from low concentration solutions.

Improved selectivity of electrochemical aniline sensing using one-dimensional silver nanorods with high aspect ratio synthesized by ascorbic acid assisted method

BackgroundAniline serves as a pivotal precursor in many industries such as pesticides, pharmaceuticals, and chemicals. However, its ingestion can lead to severe health consequences, including the potential to induce cancer, respiratory tract irritation, and adverse effects on the nervous and digestive systems in the human body. The widespread use of aniline in industrial processes, coupled with inadequate wastewater management that allows for the direct release of aniline into the environment, leads to surface and groundwater contamination. Therefore, it becomes crucial to devise a reliable electrochemical sensor capable of detecting even trace amounts of aniline. ResultsThis study presents a modified polyol synthesis method for producing silver nanorods (AgNRs, length: 861–1345 nm, diameter: 66–107 nm) with preferential growth along the (111) crystal plane. Immobilizing AgNRs on a glassy carbon (GC) electrode with Nafion as a binder decreases its charge transfer resistance from 3040 to 129 kΩ and increases its electroactive area from 0.034 to 0.101 cm2. AgNRs/GC electrode exhibited an aniline detection limit of 0.032 μM and sensitivity of 1.4841 μA.M−1cm−2 within a linear range of 0–10 μM using square wave voltammetry (SWV). The reaction rate constant of aniline sensing was determined to be 0.08697 s−1. Chlorobenzene, acephate, and chlorpyrifos could not interfere aniline detection, and 26 % decrease in peak response was observed after the 10th cycle of aniline sensing. The sensor demonstrated ∼100 % recovery for aniline, comparable to the performance of high-performance liquid chromatography when applied to real-world samples like tap and river water. SignificanceThe electrochemical sensing of aniline is notably efficient in tap and river water within the acceptable limit, by utilizing one dimensional AgNRs functionalized GC electrode. Importantly, the presence of interferents does not compromise the sensitivity of the sensor. Therefore, one dimensional AgNRs synthesized via a modified polyol route emerge as a promising electrocatalyst for the in-situ detection and determination of aniline.

Fluorescent Chiral Quantum Dots to Unveil Origin-Dependent Exosome Uptake and Cargo Release.

Exosomes are promising nanocarriers for drug delivery. Yet, it is challenging to apply exosomes in clinical use due to the limited understanding of their physiological functions. While cellular uptake of exosomes is generally known through endocytosis and/or membrane fusion, the mechanisms of origin-dependent cellular uptake and subsequent cargo release of exosomes into recipient cells are still unclear. Herein, we investigated the intricate mechanisms of exosome entry into recipient cells and intracellular cargo release. In this study, we utilized chiral graphene quantum dots (GQDs) as representatives of exosomal cargo, taking advantage of the superior permeability of chiral GQDs into lipid membranes as well as their excellent optical properties for tracking analysis. We observed that the preferential cellular uptake of exosomes derived from the same cell-of-origin (intraspecies exosomes) is higher than that of exosomes derived from different cell-of-origin (cross-species exosomes). This uptake enhancement was attributed to receptor-ligand interaction-mediated endocytosis, as we identified the expression of specific ligands on exosomes that favorably interact with their parental cells and confirmed the higher lysosomal entrapment of intraspecies exosomes (intraspecies endocytic uptake). On the other hand, we found that the uptake of cross-species exosomes primarily occurred through membrane fusion, followed by direct cargo release into the cytosol (cross-species direct fusion uptake). We revealed the underlying mechanisms involved in the cellular uptake and subsequent cargo release of exosomes depending on their cell-of-origin and recipient cell types. Overall, this study envisions valuable insights into further advancements in effective drug delivery using exosomes, as well as a comprehensive understanding of cellular communication, including disease pathogenesis.

Microballoons: Osmotically-inflated elastomer shells for ultrafast release of encapsulants and mechanical energy

HypothesisMicrocapsules with osmotically-inflated elastic shells exhibit an ultrafast release of encapsulants while mechanically stimulating the microenvironments, akin to popping balloons. ExperimentsTo prepare elastic shells with uniform thickness and size, monodisperse water-in-oil-in-water (W/O/W) double-emulsion drops are produced in a capillary microfluidic device. The polydimethylsiloxane (PDMS)-containing oil phase is thermally cured to create the elastic shell. The elastic shells are inflated by pumping water into the lumen in hypotonic conditions. The inflated microcapsules produced undergo mechanical compression, and their release properties are studied. FindingsBy controlling the osmotic pressure difference, Microballoons are inflated into a diameter of 200 μm – 316 μm and shell thickness of 7.8 μm – 0.7 µm, respectively. The inflated shell pops due to mechanical failure when subjected to mechanical stress above a certain threshold, resembling a balloon. During popping, the stretched shell rapidly retracts to the original uninflated state, resulting in an ultrafast release of encapsulants from the lumen within a millisecond. This process converts elastic potential energy stored in the shell into mechanical energy with substantial power. The microballoons mechanically stimulate the local environment, leading to the direct and rapid release of encapsulants. This has the potential to improve absorption efficiency.

Long-term benefits of hematopoietic stem cell-based macrophage/microglia delivery of GDNF to the CNS in a mouse model of Parkinson's disease.

Glial cell line-derived neurotrophic factor (GDNF) protects dopaminergic neurons in various models of Parkinson's disease (PD). Cell-based GDNF gene delivery mitigates neurodegeneration and improves both motor and non-motor functions in PD mice. As PD is a chronic condition, this study aims to investigate the long-lasting benefits of hematopoietic stem cell (HSC)-based macrophage/microglia-mediated CNS GDNF (MMC-GDNF) delivery in an MPTP (1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine) mouse model. The results indicate that GDNF treatment effectively ameliorated MPTP-induced motor deficits for up to 12 months, which coincided with the protection of nigral dopaminergic neurons and their striatal terminals. Also, the HSC-derived macrophages/microglia were recruited selectively to the neurodegenerative areas of the substantia nigra. The therapeutic benefits appear to involve two mechanisms: (1) macrophage/microglia release of GDNF-containing exosomes, which are transferred to target neurons, and (2) direct release of GDNF by macrophage/microglia, which diffuses to target neurons. Furthermore, the study found that plasma GDNF levels were significantly increased from baseline and remained stable over time, potentially serving as a convenient biomarker for future clinical trials. Notably, no weight loss, altered food intake, cerebellar pathology, or other adverse effects were observed. Overall, this study provides compelling evidence for the long-term therapeutic efficacy and safety of HSC-based MMC-GDNF delivery in the treatment of PD.

Detection of SARS-CoV-2 in Wastewater Associated with Scientific Stations in Antarctica and Possible Risk for Wildlife.

Before December 2020, Antarctica had remained free of COVID-19 cases. The main concern during the pandemic was the limited health facilities available at Antarctic stations to deal with the disease as well as the potential impact of SARS-CoV-2 on Antarctic wildlife through reverse zoonosis. In December 2020, 60 cases emerged in Chilean Antarctic stations, disrupting the summer campaign with ongoing isolation needs. The SARS-CoV-2 RNA was detected in the wastewater of several scientific stations. In Antarctica, treated wastewater is discharged directly into the seawater. No studies currently address the recovery of infectious virus particles from treated wastewater, but their presence raises the risk of infecting wildlife and initiating new replication cycles. This study highlights the initial virus detection in wastewater from Antarctic stations, identifying viral RNA via RT-qPCR targeting various genomic regions. The virus's RNA was found in effluent from two wastewater plants at Maxwell Bay and O'Higgins Station on King George Island and the Antarctic Peninsula, respectively. This study explores the potential for the reverse zoonotic transmission of SARS-CoV-2 from humans to Antarctic wildlife due to the direct release of viral particles into seawater. The implications of such transmission underscore the need for continued vigilance and research.

Measuring U.S. consumer sunscreen application at home and online: optimizing our methods to determine sunscreen application thickness for improved environmental emissions estimates

Ultraviolet (UV) filters are chemical ingredients used in sunscreen products to protect the skin from the harmful effects of solar radiation and have come under scrutiny due to concerns of potential aquatic impacts after direct release to the environment. UV filter emissions to the environment are directly influenced by the amount and frequency of sunscreen products applied by consumers. Previous research indicates that consumers have not applied adequate sunscreen thicknesses for several decades. Thus, comprehensive research is needed to investigate a more representative sunscreen application thickness to better estimate UV filter emissions from sunscreen products. A home use study and an online survey was conducted to better estimate sunscreen application thickness potentially exhibited by the general population both during daily skincare routine and when going to the beach. A secondary objective was to further improve the consumer survey method for estimating sunscreen application thickness. During their daily activities, the results of the home usage test suggest that people are applying 0.89 mg/cm2 to their face and 0.85 mg/cm2 to their body on average. Using an online survey to reach a larger sample of the population, the results were higher than the home use study with people applying on average 1.09 and 1.60 mg/cm2 to their face and body, respectively, as part of a regular skincare routine and on average 1.27 and 1.67 mg/cm2 to their face and body, respectively, when planning a day at the beach. The data generated from this study can be used in environmental emissions assessments of UV filters in sunscreen products to provide more realistic and representative estimates. In addition, the online survey instrument developed as part of this research can be used to further investigate sunscreen habits and practices that influence the amount and frequency of sunscreen used by people participating in recreational activities.

Experimental research and estimation model of gasoline evaporative emissions from vehicles in China

Evaporative emission is an important source of vehicle pollutant emission and volatile organic compounds (VOCs), causing serious environmental pollution. Carbon canisters are used to store fuel vapor in evaporative emission control (EVAP) system, but canisters are prone to saturation, leading to the direct release of fuel vapor into the atmosphere. Therefore, accurate estimation of fuel vapor generation is crucial for EVAP system. Gasoline evaporation rate is mainly influenced by vapor-liquid interface area, gasoline saturated vapor pressure, filling level and temperature. The quantitative relation between different parameters and gasoline evaporation rate has rarely been reported, and a gasoline evaporative emission estimation model suitable for China needs to be proposed urgently. In this study, gasoline evaporative emission tests have been carried out in VT-SHED, and the effects of vapor-liquid interface area, filling level and temperature on gasoline evaporative emissions have been analyzed under the premise of consistent gasoline temperature and ambient temperature. Some valuable conclusions are obtained. The results show that different from expectation, gasoline evaporative emissions are not positively correlated with the vapor-liquid interface area. There is an approximately exponential relationship between the headspace volume and gasoline evaporative emissions. The widely used Reddy equation and Hata equation underestimate the gasoline vapor generation in China. Based on China VI test program and gasoline, accurate estimation of mass transfer coefficient has been conducted, and a new semi-empirical estimation model for vapor generation has been proposed. The model can accurately estimate the fuel evaporation of vehicles in China, providing guidance for the matching and optimization of EVAP system.

Impact of fluvial discharge on 137Cs in the ocean following the Fukushima Daiichi Nuclear Power Station accident

Abstract After the Fukushima Daiichi Nuclear Power Station (F1NPS) accident, 137Cs activity concentrations have not yet decreased to pre-accident levels because of direct release from the site and fluvial discharges of 137Cs deposited on land. It is necessary to consider dispersion processes in the coastal area to understand the impact of multiple river discharges and direct release. To achieve this goal, we carried out oceanic dispersion simulations that considered direct release and fluvial discharges and compared the results with the annual averages of observed data. We assumed that particulate 137Cs discharged from rivers to the ocean quickly resuspended and re-leached after coagulation and precipitation, and that all of the 137Cs was dispersed. The reproducibility of results was improved by considering fluvial discharges of particulate 137Cs at all sites between 2013 and 2016, except near the F1NPS. In other words, particulate 137Cs discharged from rivers was found to influence the results of ocean surface activity concentrations within a relatively short period of time. The impact of direct release was dominant for the observed 137Cs activity concentrations adjacent to the F1NPS, which was used to estimate direct releases.

Evolution of the hydrothermal ore-forming system of Ashele VMS-type Cu-Zn deposit in Xinjiang, NW China: Insights from mineralogy and geochemistry of sulfides

The Ashele Cu-Zn deposit is one of the largest and most typical VMS-type Cu-Zn deposits in the Chinese Altai Mountains, Central Asian Orogenic Belt. The ore-forming processes of the Ashele deposit remains elusive, with particular uncertainties surrounding the physicochemical conditions underpinning their formation. In this study, major and trace element concentrations of the two types of sphalerite and sulfide sulfur isotopic compositions have been analyzed to constrain the mineralization conditions and ore genesis. Two stages of sphalerite have been identified, i.e., euhedral sphalerite of the early Cu mineralization stage (Sp1) and anhedral sphalerite of the late Zn mineralization stage (Sp2). Results show that Sp1 has relatively higher contents of In, Cu, Sn, and Hg, but lower levels of Cd, Ga, Ge, As, and Ag compared to that of Sp2. Utilizing the sphalerite GGIMFis geothermometer, mineralization temperatures for Sp1 and Sp2 were estimated at 225-296°C (average 258°C) and 166-264°C (average 210°C), respectively. Additionally, the Ashele sphalerite geochemistry suggests a relatively high sulfur fugacity during ore formation (lgfS2 = −8.99 to −6.55 for Sp1 and −13.58 to −6.83 for Sp2). The findings suggest an evolutionary trend of ore-forming fluids, characterized by a decrease in both temperature and sulfur fugacity from the early Cu mineralization stage to the later Zn mineralization stage. In situ δ34S values of sulfides (sphalerite, chalcopyrite, and pyrite) range from 0.84 ‰ to 6.07 ‰, indicating a sulfur origin from the thermochemical reduction of seawater sulfate and leaching of the underlying volcanic rocks, with a minor contribution from direct gas release from shallow magma chambers. Overall, this work unravels the physicochemical transformation between the two identified mineralization stages, thereby enhancing the understanding of the ore-forming process of the Ashele deposit.

Unveiling the adsorption, activation and reduction of CO2 via inorganic, biphenylene akin Pt-doped ZnMgO2

The performance of numerous existing two-dimensional (2D) materials as CO2 sequestrator remains suboptimal due to their limited capacity to adsorb and subsequently activate CO2 under mild conditions. In this study, novel 2D biphenylene alikeZnMgO2 was established using first principles calculations. First-principles calculations indicatethat the suggested 2D structure is energetically, dynamically and mechanically stable. Density functional theory (DFT) was used to investigate the adsorption of CO2 molecules on both intrinsicand Pt-doped ZnMgO2 layers.Upon the introduction of Pt doping, it was discovered that the band structure could be efficiently tuned. The strong sensing and scavenging capabilities of Pt-doped ZnMgO2 towards CO2 were inferred based on the calculated adsorption energy (Eads), electronic band structure, change transfer and charge density. Overall findings suggest that the Pt-doped ZnMgO2 is a good CO2 adsorbent under room temperature, with direct release made possible by heating to 500 K.

Observation on local high-yielding stevia (Stevia rebaudiana Bertoni L.) clone specific to Bandung District, West Java

The use of stevia (Stevia rebaudiana Bertoni L.) as a natural sweetener shows great potential. However, in Indonesia, the lack of superior and highly productive varieties has been a major challenge in its development. Nukita Co-op has developed a promising stevia clone which we evaluated in this study for its readiness to be proposed as a new and improved variety. Our research was conducted in August 2023 through primary and secondary data collection. Primary data comprised the clone development process and morphological variations observed in farmers’ fields, while secondary data included crop productivity and types of stevia-based products made. Our findings revealed that the CM3 clone, derived from a Vietnamese variety, has been cultivated by farmers in Bandung district since 2010. It has high yields (up to 7-ton dry leaves/ha/year) and is marketed as simplisia (unprocessed ingredients) and various tea variants. However, we noted high morphological variations in farmers’ fields. Therefore, stevia clone CM3 is not ready for direct release. With breeding efforts, this clone could be improved through the selection process and released as a high-yielding variety to support stevia’s development as an alternative sweetener.

Semen collection and characterization of normative reproductive traits in free-ranging ocelots (Leopardus pardalis) and bobcats (Lynx rufus) in southern Texas

Decreased genetic diversity and possible inbreeding depression have recently been documented in the last wild ocelot (Leopardus pardalis) population in the United States. One consequence of inbreeding depression in felids may be reduced semen quality which can adversely affect reproductive potential. Detailed assessments of reproductive parameters in wild individuals and populations can be conducted using assisted reproductive technologies, such as semen collection and analysis. For most felid species, semen has traditionally been collected via electroejaculation (EEJ22Electroejaculation); however, an alternative method has been developed using alpha-2 agonist drugs to induce direct sperm release into the urethra, allowing collection by catheterization without requiring specialized equipment. The goal of this study was to characterize normative reproductive traits in free-ranging ocelots and co-occurring bobcats (Lynx rufus) in southern Texas and assess the effectiveness of urethral catheterization (UC33Urethral Catheterization) for semen recovery in both species. For semen collection, free-ranging cats were live-captured and anesthetized using intramuscular ketamine and medetomidine/dexmedetomidine (alpha-2 agonist) with UC conducted 20–40 minutes post-induction. In ocelots only, EEJ was subsequently performed if UC failed to recover a viable sample. Semen collection was attempted in 31 felids (n=9 ocelots; n=22 bobcats), with sperm recovery by UC in seven of nine ocelots (78 %) and 14 of 22 bobcats (66 %), and by EEJ in four of five ocelots (80 %). For ocelots, the percentage of primary morphologic abnormalities was higher (p<0.001) for UC (47.75 ± 6.7; mean ± SEM) compared to EEJ (9 ± 2.7) but percent normal morphology (MORPH) did not differ between UC and EEJ (p=0.218). In wild ocelots, seminal parameters appeared lower relative to historical values reported for zoo-managed ocelots, possibly related to reduced heterozygosity. In wild bobcats, seminal traits were inferior to those of ocelots but similar to reports for other zoo-managed Lynx species. In conclusion, detailed male reproductive traits have been characterized for the first time in wild, free-ranging ocelots and bobcats in southern Texas. Although UC allowed semen recovery for assessment of seminal traits in both species, EEJ produced higher quality samples in ocelots when applied after UC while also mitigating the adverse impact of urine contamination observed frequently with both collection methods.

Nanocarrier drug delivery system: promising platform for targeted depression therapy.

Depression is a chronic mental disorder characterized by persistent low mood and loss of interest. Treatments for depression are varied but may not be sufficient cure. Drug-based treatment regimens have drawbacks such as slow onset of action, low bioavailability, and drug side effects. Nanocarrier Drug Delivery Systems (NDDS) has received increasing attention for brain drug delivery since it assists the drug through the blood-brain barrier and improves bioavailability, which may be beneficial for treating depression. Due to the particle size and physicochemical properties of nanocarriers, it presents a promise to improve the stability and solubility of antidepressants, thereby enhancing the drug concentration. Moreover, ligand-modified nanocarriers can be taken as a target direct medicines release system and reduce drug side effects. The purpose of the present review is to provide an up-to-date understanding of the Nanocarrier drug delivery system and relevant antidepressants in different routes of ingestion, to lay a foundation for the treatment of patients with depression.

Fe/Au galvanic nanocells to generate self-sustained Fenton reactions without additives at neutral pH.

The generation of reactive oxygen species (ROS) via the Fenton reaction has received significant attention for widespread applications. This reaction can be triggered by zero-valent metal nanoparticles by converting externally added H2O2 into hydroxyl radicals (˙OH) in acidic media. To avoid the addition of external additives or energy supply, developing self-sustained catalytic systems enabling onsite production of H2O2 at a neutral pH is crucial. Here, we present novel galvanic nanocells (GNCs) based on metallic Fe/Au bilayers on arrays of nanoporous silica nanostructures for the generation of self-sustained Fenton reactions. These GNCs exploit the large electrochemical potential difference between the Fe and Au layers to enable direct H2O2 production and efficient release of Fe2+ in water at neutral pH, thereby triggering the Fenton reaction. Additionally, the GNCs promote Fe2+/Fe3+ circulation and minimize side reactions that passivate the iron surface to enhance their reactivity. The capability to directly trigger the Fenton reaction in water at pH 7 is demonstrated by the fast degradation and mineralization of organic pollutants, by using tiny amounts of catalyst. The self-generated H2O2 and its transformation into ˙OH in a neutral environment provide a promising route not only in environmental remediation but also to produce therapeutic ROS and address the limitations of Fenton catalytic nanostructures.

Reversal of Hyperglycemia by Subcutaneous Islet Engraftment Using an Atelocollagen Sponge as a Scaffold.

Type 1 diabetes mellitus (T1DM) affects 8.4 million people worldwide, with patients primarily relying on exogenous insulin injections to maintain blood glucose levels. Islet transplantation via the portal vein has allowed for the direct internal release of insulin by glucose-sensitive islets. However, this method might not be desirable for future cell therapy transplanting pluripotent stem cell-derived β cells, facing challenges including difficulties in cell retrieval and graft loss due to the instant blood-mediated inflammatory reaction (IBMIR). Here, we established a subcutaneous transplantation protocol using an atelocollagen sponge as a scaffold. While the subcutaneous site has many advantages, the lack of a vascular bed limits its application. To address this issue, we performed angiogenesis stimulation at the transplantation site using bFGF absorbed in a gelatin sponge (Spongel), significantly improving the microvascular area. Our in vivo experiments also revealed angiogenesis stimulation is crucial for reversing hyperglycemia in streptozotocin (STZ)-induced diabetic mice. In addition to the angiogenic treatment, an atelocollagen sponge is used to carry the islets and helps avoid graft leakage. With 800 mouse islets delivered by the atelocollagen sponge, the STZ-induced diabetic mice showed a reversal of hyperglycemia and normalized glucose intolerance. Their normoglycemia was maintained until the graft was removed. Analysis of the harvested islet grafts exhibited a high vascularization and preserved morphologies, suggesting that using an atelocollagen sponge as a scaffold helps maintain the viability of the islet grafts.