Direct Genomic Values Research Articles

Comparison of analyses of the QTLMAS XIV common dataset. I: genomic selection

BackgroundFor the XIV QTLMAS workshop, a dataset for traits with complex genetic architecture has been simulated and released for analyses by participants. One of the tasks was to estimate direct genomic values for individuals without phenotypes. The aim of this paper was to compare results of different approaches used by the participants to calculate direct genomic values for quantitative trait (QT) and binary trait (BT).ResultsParticipants applied 26 approaches for QT and 15 approaches for BT. Accuracy for QT was between 0.26 and 0.89 for males and between 0.31 and 0.89 for females, and for BT ranged from 0.27 to 0.85. For QT, percentage of lost response to selection varied from 8% to 83%, whereas for BT the loss was between 15% and 71%.ConclusionsBayesian model averaging methods predicted breeding values slightly better than GBLUP in a simulated data set. The methods utilizing genomic information performed better than traditional pedigree based BLUP analyses. Bivariate analyses was slightly advantageous over single trait for the same method. None of the methods estimated the non-additivity of QTL affecting the QT, which may be one of the constrains in accuracy observed in real data.

Impacts of both reference population size and inclusion of a residual polygenic effect on the accuracy of genomic prediction

BackgroundThe purpose of this work was to study the impact of both the size of genomic reference populations and the inclusion of a residual polygenic effect on dairy cattle genetic evaluations enhanced with genomic information.MethodsDirect genomic values were estimated for German Holstein cattle with a genomic BLUP model including a residual polygenic effect. A total of 17,429 genotyped Holstein bulls were evaluated using the phenotypes of 44 traits. The Interbull genomic validation test was implemented to investigate how the inclusion of a residual polygenic effect impacted genomic estimated breeding values.ResultsAs the number of reference bulls increased, both the variance of the estimates of single nucleotide polymorphism effects and the reliability of the direct genomic values of selection candidates increased. Fitting a residual polygenic effect in the model resulted in less biased genome-enhanced breeding values and decreased the correlation between direct genomic values and estimated breeding values of sires in the reference population.ConclusionsGenetic evaluation of dairy cattle enhanced with genomic information is highly effective in increasing reliability, as well as using large genomic reference populations. We found that fitting a residual polygenic effect reduced the bias in genome-enhanced breeding values, decreased the correlation between direct genomic values and sire's estimated breeding values and made genome-enhanced breeding values more consistent in mean and variance as is the case for pedigree-based estimated breeding values.

Fitting and validating the genomic evaluation model to Polish Holstein-Friesian cattle

The aim of the study was to fit the genomic evaluation model to Polish Holstein-Friesian dairy cattle. A training data set for the estimation of additive effects of single nucleotide polymorphisms (SNPs) consisted of 1227 Polish Holstein-Friesian bulls. Genotypes were obtained by the use of Illumina BovineSNP50 Genotyping BeadChip. Altogether 29 traits were considered: milk-, fat- and protein- yields, somatic cell score, four female fertility traits, and 21 traits describing conformation. The prediction of direct genomic values was based on a mixed model containing deregressed national proofs as a dependent variable and random SNP effects as independent variables. The correlations between direct genomic values and conventional estimated breeding values estimated for the whole data set were overall very high and varied between 0.98 for production traits and 0.78 for non return rates for cows. For the validation data set of 232 bulls the corresponding correlations were 0.38 for milk-, 0.37 for protein-, and 0.32 for fat yields, while the correlations between genomic enhanced breeding values and conventional estimated breeding values for the four traits were: 0.43, 0.44, 0.31, and 0.35. This model was able to pass the interbull validation criteria for genomic selection, which indicates that it is realistic to implement genomic selection in Polish Holstein-Friesian cattle.Electronic supplementary materialThe online version of this article (doi:10.1007/s13353-011-0047-z) contains supplementary material, which is available to authorized users.

Use of haplotypes to estimate Mendelian sampling effects and selection limits

Limits to selection and Mendelian sampling (MS) terms can be calculated using haplotypes by summing the individual additive effects on each chromosome. Haplotypes were imputed for 43 382 single-nucleotide polymorphisms (SNP) in 1455 Brown Swiss, 40 351 Holstein and 4064 Jersey bulls and cows using the Fortran program findhap.f90, which combines population and pedigree haplotyping methods. Lower and upper bounds of MS variance were calculated for daughter pregnancy rate (a measure of fertility), milk yield, lifetime net merit (a measure of profitability) and protein yield assuming either no or complete linkage among SNP on the same chromosome. Calculated selection limits were greater than the largest direct genomic values observed in all breeds studied. The best chromosomal genotypes generally consisted of two copies of the same haplotype even after adjustment for inbreeding. Selection of animals rather than chromosomes may result in slower progress, but limits may be the same because most chromosomes will become homozygous with either strategy. Selection on functions of MS could be used to change variances in later generations.

Imputation of genotypes from low- to high-density genotyping platforms and implications for genomic selection

The objective of this study was to quantify the accuracy achievable from imputing genotypes from a commercially available low-density marker panel (2730 single nucleotide polymorphisms (SNPs) following edits) to a commercially available higher density marker panel (51 602 SNPs following edits) in Holstein–Friesian cattle using Beagle, a freely available software package. A population of 764 Holstein–Friesian animals born since 2006 were used as the test group to quantify the accuracy of imputation, all of which had genotypes for the high-density panel; only SNPs on the low-density panel were retained with the remaining SNPs to be imputed. The reference population for imputation consisted of 4732 animals born before 2006 also with genotypes on the higher density marker panel. The concordance between the actual and imputed genotypes in the test group of animals did not vary across chromosomes and was on average 95%; the concordance between actual and imputed alleles was, on average, 97% across all SNPs. Genomic predictions were undertaken across a range of production and functional traits for the 764 test group animals using either their real or imputed genotypes. Little or no mean difference in the genomic predictions was evident when comparing direct genomic values (DGVs) using real or imputed genotypes. The average correlation between the DGVs estimated using the real or imputed genotypes for the 15 traits included in the Irish total merit index was 0.97 (range of 0.92 to 0.99), indicating good concordance between proofs from real or imputed genotypes. Results show that a commercially available high-density marker panel can be imputed from a commercially available lower density marker panel, which will also have a lower cost, thereby facilitating a reduction in the cost of genomic selection. Increased available numbers of genotyped and phenotyped animals also has implications for increasing the accuracy of genomic prediction in the entire population and thus genetic gain using genomic selection.

Accuracy of direct genomic values derived from imputed single nucleotide polymorphism genotypes in Jersey cattle

The objective of the present study was to evaluate the predictive ability of direct genomic values for economically important dairy traits when genotypes at some single nucleotide polymorphism (SNP) loci were imputed rather than measured directly. Genotypic data consisted of 42,552 SNP genotypes for each of 1,762 Jersey sires. Phenotypic data consisted of predicted transmitting abilities (PTA) for milk yield, protein percentage, and daughter pregnancy rate from May 2006 for 1,446 sires in the training set and from April 2009 for 316 sires in the testing set. The SNP effects were estimated using the Bayesian least absolute selection and shrinkage operator (LASSO) method with data of sires in the training set, and direct genomic values (DGV) for sires in the testing set were computed by multiplying these estimates by corresponding genotype dosages for sires in the testing set. The mean correlation across traits between DGV (before progeny testing) and PTA (after progeny testing) for sires in the testing set was 70.6% when all 42,552 SNP genotypes were used. When genotypes for 93.1, 96.6, 98.3, or 99.1% of loci were masked and subsequently imputed in the testing set, mean correlations across traits between DGV and PTA were 68.5, 64.8, 54.8, or 43.5%, respectively. When genotypes were also masked and imputed for a random 50% of sires in the training set, mean correlations across traits between DGV and PTA were 65.7, 63.2, 53.9, or 49.5%, respectively. Results of this study indicate that if a suitable reference population with high-density genotypes is available, a low-density chip comprising 3,000 equally spaced SNP may provide approximately 95% of the predictive ability observed with the BovineSNP50 Beadchip (Illumina Inc., San Diego, CA) in Jersey cattle. However, if fewer than 1,500 SNP are genotyped, the accuracy of DGV may be limited by errors in the imputed genotypes of selection candidates.

Accuracy of direct genomic values in Holstein bulls and cows using subsets of SNP markers

BackgroundAt the current price, the use of high-density single nucleotide polymorphisms (SNP) genotyping assays in genomic selection of dairy cattle is limited to applications involving elite sires and dams. The objective of this study was to evaluate the use of low-density assays to predict direct genomic value (DGV) on five milk production traits, an overall conformation trait, a survival index, and two profit index traits (APR, ASI).MethodsDense SNP genotypes were available for 42,576 SNP for 2,114 Holstein bulls and 510 cows. A subset of 1,847 bulls born between 1955 and 2004 was used as a training set to fit models with various sets of pre-selected SNP. A group of 297 bulls born between 2001 and 2004 and all cows born between 1992 and 2004 were used to evaluate the accuracy of DGV prediction. Ridge regression (RR) and partial least squares regression (PLSR) were used to derive prediction equations and to rank SNP based on the absolute value of the regression coefficients. Four alternative strategies were applied to select subset of SNP, namely: subsets of the highest ranked SNP for each individual trait, or a single subset of evenly spaced SNP, where SNP were selected based on their rank for ASI, APR or minor allele frequency within intervals of approximately equal length.ResultsRR and PLSR performed very similarly to predict DGV, with PLSR performing better for low-density assays and RR for higher-density SNP sets. When using all SNP, DGV predictions for production traits, which have a higher heritability, were more accurate (0.52-0.64) than for survival (0.19-0.20), which has a low heritability. The gain in accuracy using subsets that included the highest ranked SNP for each trait was marginal (5-6%) over a common set of evenly spaced SNP when at least 3,000 SNP were used. Subsets containing 3,000 SNP provided more than 90% of the accuracy that could be achieved with a high-density assay for cows, and 80% of the high-density assay for young bulls.ConclusionsAccurate genomic evaluation of the broader bull and cow population can be achieved with a single genotyping assays containing ~ 3,000 to 5,000 evenly spaced SNP.

Predicting energy balance for dairy cows using high-density single nucleotide polymorphism information

The objective of this study was to investigate the genetic basis of energy balance (EB) and the potential use of genomic selection to enable EB to be incorporated into selection programs. Energy balance provides an essential link between production and nonproduction traits because both depend on a common source of energy. A small number (527) of Dutch Holstein-Friesian heifers with phenotypes for EB were genotyped. Direct genomic values were predicted for these heifers using a model that included the genotypic information. A polygenic model was also applied to predict estimated breeding values using only pedigree information. A 10-fold cross-validation approach was employed to assess the accuracies of the 2 sets of predicted breeding values by correlating them with phenotypes. Because of the small number of phenotypes, accuracies were relatively low (0.29 for the direct genomic values and 0.21 for the estimated breeding values), where the maximum possible accuracy was the square root of heritability (0.57). Despite this, the genomic model produced breeding values with reliability double that of the breeding values produced by the polygenic model. To increase the accuracy of the genomic breeding values and make it possible to select for EB, measurement and recording of EB would need to improve. The study suggests that it may be possible to select for minimally recorded traits; for instance, those measured on experimental farms, using genomic selection. Overall, the study demonstrated that genomic selection could be used to select for EB, confirming its genetic background.

Predictive ability of direct genomic values for lifetime net merit of Holstein sires using selected subsets of single nucleotide polymorphism markers

The objective of the present study was to assess the predictive ability of subsets of single nucleotide polymorphism (SNP) markers for development of low-cost, low-density genotyping assays in dairy cattle. Dense SNP genotypes of 4,703 Holstein bulls were provided by the USDA Agricultural Research Service. A subset of 3,305 bulls born from 1952 to 1998 was used to fit various models (training set), and a subset of 1,398 bulls born from 1999 to 2002 was used to evaluate their predictive ability (testing set). After editing, data included genotypes for 32,518 SNP and August 2003 and April 2008 predicted transmitting abilities (PTA) for lifetime net merit (LNM$), the latter resulting from progeny testing. The Bayesian least absolute shrinkage and selection operator method was used to regress August 2003 PTA on marker covariates in the training set to arrive at estimates of marker effects and direct genomic PTA. The coefficient of determination (R2) from regressing the April 2008 progeny test PTA of bulls in the testing set on their August 2003 direct genomic PTA was 0.375. Subsets of 300, 500, 750, 1,000, 1,250, 1,500, and 2,000 SNP were created by choosing equally spaced and highly ranked SNP, with the latter based on the absolute value of their estimated effects obtained from the training set. The SNP effects were re-estimated from the training set for each subset of SNP, and the 2008 progeny test PTA of bulls in the testing set were regressed on corresponding direct genomic PTA. The R2 values for subsets of 300, 500, 750, 1,000, 1,250, 1,500, and 2,000 SNP with largest effects (evenly spaced SNP) were 0.184 (0.064), 0.236 (0.111), 0.269 (0.190), 0.289 (0.179), 0.307 (0.228), 0.313 (0.268), and 0.322 (0.291), respectively. These results indicate that a low-density assay comprising selected SNP could be a cost-effective alternative for selection decisions and that significant gains in predictive ability may be achieved by increasing the number of SNP allocated to such an assay from 300 or fewer to 1,000 or more.