Direct Cytotoxicity Assay Research Articles

Functionalized magnesium alloys obtained by superplastic forming process retain osteoinductive and antibacterial properties: An in-vitro study

ObjectivesThis study aimed to investigate the biocompatibility, osteogenic and antibacterial activity of biomedical devices based on Magnesium (Mg) Alloys manufactured by Superplastic Forming process (SPF) and subjected to Hydrothermal (HT) and Sol-Gel Treatment (Sol-Gel). MethodsMg-SPF devices subjected to Hydrothermal (Mg-SPF+HT) and Sol-Gel Treatment (Mg-SPF+Sol-Gel) were investigated. The biocompatibility of Mg-SPF+Sol-Gel and Mg-SPF+HT devices was observed by indirect and direct cytotoxicity assays, whereas the colonization of sample surfaces was assessed by confocal microscopy. qRT-PCR analysis and microbial growth curve analyses were employed to evaluate the osteogenic and antibacterial activity of both SPF-Mg treated devices, respectively. ResultsMg-SPF+HT and Mg-SPF+Sol-Gel showed a high degree of biocompatibility. Analysis of mRNA expression of osteogenic genes in cells cultured on Mg-treated devices revealed a significant upregulation of the expression levels of BMP2 and Runx-2. Furthermore, the bacterial growth in strains developed in contact with both the Mg-SPF+HT and Mg-SPF+Sol-Gel devices was lower than that observed in the control. SignificanceHydrothermal and Sol-Gel Treatments of Mg alloys obtained through the SPF process demonstrated bioactive, osteogenic and antibacterial activity, offering a promising alternative to conventional Mg-based devices. The obtained Mg-based materials may have the potential to enhance the tunability of temporary devices in maxillary reconstruction, eliminating the need for second surgeries, and ensuring a good bone reconstruction and a reduced implant failure rate due to bacterial infections.

Metastable FeMg particles for controlling degradation rate, mechanical properties, and biocompatibility of Poly(l-lactic) acid (PLLA) for orthopedic applications

Poly(l-lactic) acid (PLLA) is commonly used in bioabsorbable medical implants, but it suffers from slow degradation rate and rapid decline in mechanical properties for orthopedic applications. To address this drawback, recent research has explored the use of Mg as a filler for PLLA, resulting in composites with improved degradation rate and cytocompatibility compared to neat PLLA. In this study, FeMg powder particles were proposed as fillers for PLLA to investigate the potential of PLLA/FeMg composites for bioabsorbable implants. Cylinder specimens of PLLA, PLLA/Fe, PLLA/Mg and PLLA/FeMg were prepared using solvent casting followed by thermo-molding. The microstructure, thermal behavior, in vitro degradation behavior in simulated body fluid, mechanical properties and cytocompatibility of these composites were examined. The results indicate that the presence of FeMg particles prevents the deterioration of the composite mechanical properties, at least up to 14 days. Once a certain amount of degradation of the composite is reached, the degradation is faster than that of PLLA. Direct cytotoxicity assays revealed that pre-osteoblast MC3T3-E1 cells successfully adhered to and proliferated on the PLLA/FeMg surface. The inclusion of a low percentage of Mg into the Fe lattice not only accelerated the degradation rate of Fe but also improved its cytocompatibility. The enhanced degradation rate, mechanical properties, and osteoconductive properties of this composite make it a promising option for temporary orthopedic biomedical devices.

Fabrication and Characterization of Zn Particle Incorporated Fibrous Scaffolds for Potential Application in Tissue Healing and Regeneration.

Zinc (Zn) metal and its alloys have received a lot of interest in biomedical applications due to their biodegradability, biocompatibility, antimicrobial activity, and ability to stimulate tissue regeneration. Bulk Zn has been successfully utilized in a variety of implant applications, most notably as bioabsorbable cardiac stents and orthopedic fixation devices, where it provides adequate mechanical properties while also releasing helpful Zn ions (Zn2+) during degradation. Such beneficial ions are dose-dependent and, when released in excess, can induce cellular toxicity. In this study, we hypothesize that embedding Zn metal particles into a polymer nanofibrous scaffold will enable control of the degradation and time release of the Zn2+. We designed and fabricated two polymer scaffolds, polycaprolactone (PCL) and polycaprolactone-chitosan (PCL-CH). Each scaffold had an increasing amount of Zn. Several physicochemical properties such as fiber morphology, crystallinity, mechanical strength, hydrophilicity, degradation and release of Zn2+, thermal properties, chemical compositions, and so forth were characterized and compared with the PCL fibrous scaffold. The biological properties of the scaffolds were evaluated in vitro utilizing direct and indirect cytotoxicity assays and cell viability. All the data show that the addition of Zn changed various physical properties of the PCL and PCL-CH scaffolds except their chemical structure. Further investigation reveals that the PCL-CH scaffolds degrade the Zn particles relatively faster than the PCL because the presence of the hydrophilic CH influences the faster release of Zn2+ in cell culture conditions as compared to the PCL fibrous scaffold. The combined advantages of CH and Zn in the PCL scaffold enriched 3T3 fibroblast cells' survival and proliferation except the ones with the higher concentration of Zn particles. These new composite scaffolds are promising and can be further considered for tissue healing and regeneration applications.

Zinc oxide-carbon nanofiber (ZnO-CNF) nanocomposite for bone tissue engineering: An inquiry into structural, physical and biological properties

Electrospun carbon nanofibers (CNFs) have been used for different tissue-engineered applications because of their biocompatibility and electrical conductivity. Many studies have tried to embed various nanoparticles such as zinc oxide nanoparticles (ZnONPs) in CNFs to adjust their properties. However, a widespread investigation into the ZnONP effect on the properties of nanocomposites has not been done in detail. In this study, we provided an experimental approach to evaluate the effects of ZnONPs on various structural and non-structural properties of CNF meshes. Different amounts of ZnONPs were incorporated into or sprayed on CNF during electrospinning, and structural characterizations and biocompatibility evaluation were carried out to estimate related parameters. Although higher ZnONP amounts decreased conductivity, surface wettability was improved by ∼19–33%. Also, FTIR, XRD, and Raman analyses proved that the presence of ZnONP improved structure formation with lower defect density. Direct and indirect cellular cytotoxicity assays revealed the good biocompatibility of ZnONP–CNF composites, and MG-63 cells could attach and spread well on the surface of all nanocomposites. Overall, the present study offers insight into ZnONP-containing CNFs, which makes them suitable for bone tissue engineering.

Dendritic cells transfected with a polyepitope DNA construct stimulate an antitumor cytotoxic response in various tumors.

Dendritic cells (DCs) loaded with tumor-associated antigens (TAAs) are known to be crucial for the antitumor response and are still included in various treatment regimens in cancer immunotherapy research. In the present study, a cell-based protocol was evaluated, involving the use of original DNA constructs encoding the wide range of TAA epitopes expressed on different epithelial cancers. The constructs were transfected into in vitro-generated DCs of patients with various types of cancer, including breast, colorectal and non-small cell lung cancer. The direct cytotoxicity assay of effector cells, activated with the transfected DCs, revealed a significant increase in cytotoxicity against autologous tumor cells. The use of DNA constructs encoding a large number of TAAs for insertion into DCs in vitro, aiming to activate a T-cell response may prove to be a reliable and unified approach for immunotherapy and for the prevention of relapse in patients with epithelial cancers.

In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay.

In vitro cytotoxicity assessment is indispensable in developing new biodegradable implant materials. Zn, which demonstrates an ideal corrosion rate between Mg- and Fe-based alloys, has been reported to have excellent in vivo biocompatibility. Therefore, modifications aimed at improving Zn's mechanical properties should not degrade its biological response. As sufficient strength, ductility and corrosion behavior required of load-bearing implants has been obtained in plastically deformed Zn-3Ag-0.5Mg, the effect of simultaneous Ag and Mg additions on in vitro cytocompatibility and antibacterial properties was studied, in relation to Zn and Zn-3Ag. Direct cell culture on samples and indirect extract-based tests showed almost no significant differences between the tested Zn-based materials. The diluted extracts of Zn, Zn-3Ag, and Zn-3Ag-0.5Mg showed no cytotoxicity toward MG-63 cells at a concentration of ≤12.5%. The cytotoxic effect was observed only at high Zn2+ ion concentrations and when in direct contact with metallic samples. The highest LD50 (lethal dose killing 50% of cells) of 13.4mg/L of Zn2+ ions were determined for the Zn-3Ag-0.5Mg. Similar antibacterial activity against Escherichia coli and Staphylococcus aureus was observed for Zn and Zn alloys, so the effect is attributed mainly to the released Zn2+ ions exhibiting bactericidal properties. Most importantly, our experiments indicated the limitations of water-soluble tetrazolium salt-based cytotoxicity assays for direct tests on Zn-based materials. The discrepancies between the WST-8 assay and SEM observations are attributed to the interference of Zn2+ ions with tetrazolium salt, therefore favoring its transformation into formazan, giving false cell viability quantitative results.

CD155 and CD112 as possible therapeutic targets of FLT3 inhibitors for acute myeloid leukemia.

Acute myeloid leukemia (AML) relapse is considered to be related to escape from antitumor immunity. Changes in the expression of immune checkpoints, including B7 homolog (H)1 and B7-H2, have been reported to contribute to AML progression. Binding of T cell immunoglobulin and immunoreceptor tyrosine-based inhibitory motif domain (TIGIT) among other immune checkpoints on natural killer (NK) and T cells to CD155/CD112 in tumors is supposed to be inhibitory; however, the mechanism by which changes in CD155 and CD112 expression affect tumor immunity remains unclear. When the increased expression of CD155 and CD112 activates Raf-MEK-ERK pathway and Raf-MEK-ERK pathway is one of the targets of FMS-like tyrosine kinase 3 (FLT3) inhibition. The present study investigated the alterations in CD155 and CD112 expression under FLT3 inhibition (quizartinib and gilteritinib) and studied its effect on NK and T cell cytotoxicity. CD155 and CD112 expression was analyzed using flow cytometry and reverse transcription-quantitative PCR in AML cell lines with or without FLT3 mutation using FLT3 inhibitors. CD155 and CD112 expression was specifically downregulated by FLT3 inhibition in FLT3-mutated cell lines. Direct cytotoxicity and antibody-dependent cellular cytotoxicity against these cells by NK cells were enhanced. However, the cytotoxicity of γδ T cells with low TIGIT expression compared with NK cells was not enhanced in direct cytotoxicity assay using luciferase luminescence. The analysis of clinical trials from The Cancer Genome Atlas (TCGA) revealed that high CD155 and CD112 expression is associated with poor overall survival. The enhanced cytotoxicity of NK cells against CD155- and CD112-downregulated cells following FLT3 inhibition indicated CD155 and CD112 as possible targets of immunotherapy for AML using FLT3 inhibitors.

Beta-agonist drugs modulate the proliferation and differentiation of skeletal muscle cells in vitro

Essentially employed for the treatment of airway obstructions in humans, β-agonists are also known to have an anabolic effect in animals’ skeletal muscle. In vivo and in vitro studies have attested the increase in animal body mass and the hypertrophy of muscle cells following the administration of specific β-agonists. However, the contribution of β-agonists to C2C12 myoblasts growth remains obscure. We therefore aimed to investigate the impact of β1-and β2-agonist drugs on the proliferation and differentiation of skeletal muscle cells. Direct observations and cytotoxicity assay showed that clenbuterol, salbutamol, cimaterol and ractopamine enhanced muscle cell growth and viability during the proliferation stage. Structural examinations coupled to Western blot analysis indicated that salbutamol and cimaterol triggered a decrease in myotube formation. A better comprehension of the effect of β-agonists on myogenic regulatory genes in the muscle cells is crucial to establish a specific role of β-agonists in muscle development, growth, and regeneration.

The Effect of Pore Size Distribution and l-Lysine Modified Apatite Whiskers (HAP) on Osteoblasts Response in PLLA/HAP Foam Scaffolds Obtained in the Thermally Induced Phase Separation Process.

In this research, we prepared foam scaffolds based on poly(l-lactide) (PLLA) and apatite whiskers (HAP) using thermally induced phase separation technique supported by the salt leaching process (TIPS-SL). Using sodium chloride having a size of (a) 150–315 μm, (b) 315–400 μm, and (c) 500–600 μm, three types of foams with different pore sizes have been obtained. Internal structure of the obtained materials has been investigated using SEM as well as μCT. The materials have been studied by means of porosity, density, and compression tests. As the most promising, the composite prepared with salt size of 500–600 μm was prepared also with the l-lysine modified apatite. The osteoblast hFOB 1.19 cell response for the scaffolds was also investigated by means of cell viability, proliferation, adhesion/penetration, and biomineralization. Direct contact cytotoxicity assay showed the cytocompatibility of the scaffolds. All types of foam scaffolds containing HAP whiskers, regardless the pore size or l-lysine modification induced significant stimulatory effect on the cal-cium deposits formation in osteoblasts. The PLLA/HAP scaffolds modified with l-lysine stimulated hFOB 1.19 osteoblasts proliferation. Compared to the scaffolds with smaller pores (150–315 µm and 315–400 µm), the PLLA/HAP foams with large pores (500–600 µm) promoted more effective ad-hesion of osteoblasts to the surface of the biomaterial.

Lyophilized Polyvinylpyrrolidone Hydrogel for Culture of Human Oral Mucosa Stem Cells.

This work shows the synthesis of a polyvinylpyrrolidone (PVP) hydrogel by heat-activated polymerization and explores the production of hydrogels with an open porous network by lyophilisation to allow the three-dimensional culture of human oral mucosa stem cells (hOMSCs). The swollen hydrogel showed a storage modulus similar to oral mucosa and elastic solid rheological behaviour without sol transition. A comprehensive characterization of porosity by scanning electron microscopy, mercury intrusion porosimetry and nano-computed tomography (with spatial resolution below 1 μm) showed that lyophilisation resulted in the heterogeneous incorporation of closed oval-like pores in the hydrogel with broad size distribution (5 to 180 μm, d50 = 65 μm). Human oral mucosa biopsies were used to isolate hOMSCs, expressing typical markers of mesenchymal stem cells in more than 95% of the cell population. Direct contact cytotoxicity assay demonstrated that PVP hydrogel have no negative effect on cell metabolic activity, allowing the culture of hOMSCs with normal fusiform morphology. Pore connectivity should be improved in future to allow cell growth in the bulk of the PVP hydrogel.

Measurement methods for the mechanical testing and biocompatibility assessment of polymer-ceramic connective tissue replacements

This paper describes the measurement methods of UV cross-linked hydroxyapatite-polymers composites particularly focused on the role of their composition on structure, mechanical properties, and biocompatibility. Morphology and elemental composition were investigated with SEM-EDS. The chemical structure was analysed with FT-IR spectroscopy. Stereometric and surface roughness parameters, stress and strain in the static tensile test, and swelling kinetic of composites were also studied. Biocompatibility assessment was performed utilizing direct contact cytotoxicity assay and pro-inflammatory tests. Cell morphology observation was undertaken with confocal microscopy. The composites containing poly(vinylpyrrolidone) and gelatin revealed a 9% deformation and 164.0 ± 2.3% sorption capacity. The addition of albumin and aspartic acid results in a 16% higher deformation and 166.5 ± 3.3% equilibrium swelling. The materials were not cytotoxic. The morphology of the cells exposed to the composites remained unchanged. Composite based on poly(vinylpyrrolidone) and gelatin induced monocyte cytoplasmic extensions lengthening of 207.2% in comparison with the reference material.

Determination of antibiotics and detergent residues in decellularized tissue-engineered heart valves using LC-MS/MS.

Residual chemicals that are presented during tissue processing in human tissue banks can be a risk for the allograft recipient. Determine the residual concentrations of the antibiotics and detergent used in the process of human decellularized tissue-engineered heart valves stored in isotonic saline solution up to 18months. A total of 24 human decellularized allografts were stored in sterile sodium chloride and analyzed immediately after the decellularization process (0months) and after storage for 6, 12, and 18months, which includes the use of sodium dodecyl sulfate (SDS) and antibiotics (cefoxitin, vancomycin hydrochloride, lincomycin hydrochloride, polymyxin B sulfate). These valves were used for suitability tests, the zone of inhibition evaluation, and direct contact cytotoxicity assay. The stock solution from 32 valves was used for LC-MS/MS analysis of antibiotics and SDS. Tissue samples from decellularized valves showed a zone of inhibition formation for S. aureus and B. subtilis, suggesting the presence of an inhibitory molecule in the tissue. Cytotoxicity tests were negative. Polymyxin B, vancomycin, and SDS were detected and quantified in human decellularized aortic and pulmonary allografts during all periods of the study. There were no traces of residual cefoxitin and lincomycin in the tissue stock solution. We found residual concentrations of the antibiotics and detergent used in the process of human decellularized tissue-engineered heart valves stored in isotonic saline solution up to 18months.

4313 Impaired Natural Killer Cell Function May Be Associated with Cancer-related Fatigue

OBJECTIVES/GOALS: During and after cancer treatment, cancer-related fatigue (CRF) is a debilitating symptom reported by up to 80% of cancer patients Our understanding of the pathology underlying CRF is limited. Preliminary RNA sequencing data suggest that increased levels of KIR3DL1, the natural killer cell (NK) immunoglobulin-like receptor 3DL1a, may be associated with CRF. METHODS/STUDY POPULATION: Fatigue was measured using the Functional Assessment of Chronic Illness Therapy-Fatigue (FACT-F). Functional validation of the NK cell finding was performed from whole blood obtained from fatigued and non-fatigued subjects. NK cells were isolated from freshly collected whole blood using a human NK cell isolation kit based on CD56 microbead positive selection. NK cell function was assessed using the NK cell direct cytotoxicity assay. Briefly, isolated NK cells were co-cultured in a 2:1 ratio with calcein AM-labelled K562 cells, which are NK cell-sensitive due to the very low MHCI expression. NK cell-mediated cytotoxicity was assessed with Cytation 1 Cell Imaging Multi-Mode reader. Flow cytometric protocols were used to examine NK subset differences between the fatigued and non-fatigued groups. RESULTS/ANTICIPATED RESULTS: NK cells isolated from the fatigued group exhibited decreased cytotoxicity at 12.28% compared to NK cells isolated from non-fatigued controls at a mean of 40.6% cytotoxicity. Flow cytometry analysis revealed a decrease in the CD56dim CD16bright population in the fatigued group (87.1% of CD56+CD4- cells) compared to the control (91.4% of CD56+CD4- cells). Furthermore, there was a decrease in NKG2A expression in mature NK cells (CD56dim CD16bright) isolated from the fatigued group compared to the non-fatigued group. DISCUSSION/SIGNIFICANCE OF IMPACT: Results from the pilot study suggest that there was a decrease in NK cell cytotoxicity in the fatigued group. In addition, there may be a shift in NK cell subpopulations associated with fatigue. Findings from this pilot study suggest that impaired NK cell function may be associated with CRF pathogenesis.

Influence of the digestive process on intestinal toxicity of polystyrene microplastics as determined by in vitro Caco-2 models

The digestive tract is an important target organ for microplastics (MPs). However, little is known about the effects of digestive treatment on the intestinal toxicity of MPs. In this study, an in vitro digestive process was applied to transform 100 nm and 5 μm polystyrene microplastics (PS-MPs). Intestinal toxicities of original PS-MPs and transformed PS-MPs (t-PS-MPs) were determined using an in vitro Caco-2 monolayer model. Results showed that the digestive process did not alter the chemical constitution of PS-MPs, but formed a corona on the surface of PS-MPs. The 100 nm PS-MPs showed higher intestinal toxicity than 5 μm PS-MPs. Digestive treatment relieved cytotoxicity and transport function disorder of the Caco-2 monolayer induced by the original PS-MPs. Moreover, the combined toxicities of PS-MPs and arsenic were also decreased by digestive treatment. However, the in vitro digestive process increased the proinflammatory effects of PS-MPs. The formation of a corona on the PS-MP surface, which lead to a change in size, Zeta potential, and adsorbed compounds, might induce the above influence of digestive treatment. Our study suggests that direct cytotoxicity assays of PS-MPs might misestimate their intestinal effects, which provide new lights to the toxicity evaluation of PS-MPs by oral exposure.

Expansion and CD2/CD3/CD28 stimulation enhance Th2 cytokine secretion of human invariant NKT cells with retained anti-tumor cytotoxicity

Background aimsKey obstacles in human iNKT cell translational research and immunotherapy include the lack of robust protocols for dependable expansion of human iNKT cells and the paucity of data on phenotypes in post-expanded cells. MethodsWe delineate expansion methods using interleukin (IL)-2, IL-7 and allogeneic feeder cells and anti-CD2/CD3/CD28 stimulation by which to dependably augment Th2 polarization and direct cytotoxicity of human peripheral blood CD3+Vα24+Vβ11+ iNKT cells. ResultsGene and protein expression profiling demonstrated augmented Th2 cytokine secretion (IL-4, IL-5, IL-13) in expanded iNKT cells stimulated with anti-CD2/CD3/CD28 antibodies. Cytotoxic effector molecules including granzyme B were increased in expanded iNKT cells after CD2/CD3/CD28 stimulation. Direct cytotoxicity assays using unstimulated expanded iNKT cell effectors revealed α-galactosyl ceramide (α-GalCer)-dependent killing of the T-ALL cell line Jurkat. Moreover, CD2/CD3/CD28 stimulation of expanded iNKT cells augmented their (α-GalCer-independent) killing of Jurkat cells. Co-culture of expanded iNKT cells with stimulated responder cells confirmed contact-dependent inhibition of activated CD4+ and CD8+ responder T cells. DiscussionThese data establish a robust protocol to expand and novel pathways to enhance Th2 cytokine secretion and direct cytotoxicity in human iNKT cells, findings with direct implications for autoimmunity, vaccine augmentation and anti-infective immunity, cancer immunotherapy and transplantation.

Abstract 215: Generation of site-specific DARPin® drug conjugates using EGFR as a model system

Abstract DARPin® molecules are small engineered proteins, derived from natural ankyrin repeat proteins that are selected to bind to specific targets with high affinity. Individual DARPin® molecules can be linked together genetically in order to create multi-specific drug molecules. This versatility of DARPin® molecules makes them an attractive alternative to antibodies for the development of drug conjugates. We have developed DARPin® drug conjugates (DDCs) using a model EGFR multi-specific DARPin® molecule, consisting of four DARPin® domains linked together. DARPin® constructs were conjugated to the indolinobenzodiazepine mono-imine DGN549, a potent DNA alkylating payload. Biophysical characterization showed the DDCs to be well behaved in stability and solubility assays. The in vitro binding and cytotoxicity of these DDCs were evaluated. The DARPin® conjugates displayed in vitro potency in direct cytotoxicity assays across a panel of cell lines expressing EGFR. The impact of conjugation on PK parameters and in vivo efficacy is currently under evaluation. DARPin® drug conjugates combine the potency observed with antibody drug conjugates and the modular design of DARPin® molecules to create designer therapeutics. Citation Format: Laura A. Laviolette, Cynthia J. Guidi, Christian Reichen, Qifeng Qiu, Luke Harris, Patricia Schildknecht, Stefanie Fischer, Zita Arany, Tanja Hospodarsch, Anna Skaletskaya, Megan Fuller, Stephen Abbott, Rebecca McCarthy, Jenny Lee, Katherine Francisco, Kerstin Sinkevicius, Sharlene Adams, Christopher Espelin, Emily Reid, Wei Li, Carla Marashio, Kerry Donahue, Stuart Hicks, Dan Snell. Generation of site-specific DARPin® drug conjugates using EGFR as a model system [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2019; 2019 Mar 29-Apr 3; Atlanta, GA. Philadelphia (PA): AACR; Cancer Res 2019;79(13 Suppl):Abstract nr 215.

Viability Assays of PLLA Fibrous Membranes Produced by Rotary Jet Spinning for Application in Tissue Engineering

Abstract Tissue engineering suggests different forms to reconstruct tissues and organs. One of the ways is through the use of polymeric biomaterials such as poly(L-lactic acid) (PLLA). PLLA is a recognized material in tissue engineering due to its characteristics as biocompatibility and bioresorbability. In this work PLLA fibrous membranes were produced by a simple technique known as rotary jet spinning. The rotary jet spinning consists of fibrous membranes production, with fibers of scale nano/micrometric, from a polymeric solution through the centrifugal force generated by the equipment. The membranes formed were subjected to preliminary in vitro assays to verify the cytotoxicity of the membranes made in contact with the cells. Direct cytotoxicity assays were performed through the MTT, AlamarBlue® and Live/Dead® tests, with fibroblastic and osteoblastic cells. The results obtained in this study showed that PLLA membranes produced by rotary jet spinning showed promising results in the 24-hours contact period of the cells with the PLLA fibrous membranes. The information presented in this preliminary study provides criteria to be taken in the future procedures that will be performed with the biomaterial produced, aiming at its improvement.

Structural and bone marrow stem cell biocompatibility studies of hydrogel synthesized via chemo-enzymatic route.

Natural biopolymers have many attractive medical applications; however, complications due to fibrosis caused a reduction in diffusion and dispersal of nutrients and waste products. Consequently, severe immunocompatibility problems and poor mechanical and degradation properties in synthetic polymers ensue. Hence, the present study investigates a novel hydrogel material synthesized from caprolactone, ethylene glycol, ethylenediamine, polyethylene glycol, ammonium persulfate, and tetramethylethylenediamine via chemo-enzymatic route. Spectroscopic analyses indicated the formation of polyurea and polyhydroxyurethane as the primary building block of the hydrogel starting material. Biocompatibility studies showed positive observation in biosafety test using direct contact cytotoxicity assay in addition to active cellular growth on the hydrogel scaffold based on fluorescence observation. The synthesized hydrogel also exhibited (self)fluorescence properties under specific wavelength excitation. Hence, synthesized hydrogel could be a potential candidate for medical imaging as well as tissue engineering applications as a tissue expander, coating material, biosensor, and drug delivery system.

Efficacy of Concentrated Surfactant-Based Wound Dressings in Wound Repair and Biofilm Reduction.

Objective: This study was set up to evaluate the efficacy of a concentrated surfactant-based wound dressing (with and without silver sulfadiazine [SSD]) on wound repair, by investigating their ability to enhance human dermal fibroblast proliferation and viability. In addition, the wound dressings were evaluated for their ability to suppress biofilms in a three-dimensional (3D) in vitro wound biofilm model and modulate the inflammatory cytokine interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNFα). Approach: Problematic biofilms are well known to affect fibroblast and keratinocyte viability. To assess wound repair and inflammatory cytokine modulation, a direct cytotoxicity assay and a 3D keratinocyte-fibroblast model were employed. Results: At 1 and 7 days posttreatment, the non-antimicrobial dressing was noncytotoxic and the antimicrobial dressing was moderately cytotoxic to adult human dermal fibroblasts cells. Within the 3D wound model, the biofilm demonstrated a decelerating effect on wound closure and a decrease in viable cells. When the non-antimicrobial- and antimicrobial-based concentrated surfactant-based wound dressing was applied to the wound model, reduced biofilm was observed. The application of wound dressings to the biofilm-infected wound also resulted in a reduction of IL-6 and TNFα. The concentrated surfactant-based wound dressing without an antimicrobial was shown to enhance cellular viability and migration. Innovation and Conclusion: We have demonstrated the ability of a surfactant-based wound dressing to minimize the deleterious effects of a wound biofilm, modulate the secretion of inflammatory cytokines, and enhance cellular proliferation in a biofilm-infected wound model. Furthermore, the non-antimicrobial-based concentrated surfactant dressings did not affect cellular viability and therefore represents a multifaceted approach to the treatment of wounds infected with biofilms.

Bioactive glasses functionalized with polyphenols: in vitro interactions with healthy and cancerous osteoblast cells

Bioactive glasses are widely studied as biomaterials for bone contact applications. In this research work, the opportunity to modify the surface of a bioactive glass with polyphenols (gallic acid, and natural polyphenols extracted from red grape skin and green tea leaves) has been investigated in order to induce a selective anti-tumor activity in vitro. The presence of surface grafted molecules has been optically proved by fluorescence microscopy exploiting their auto-fluorescence. Direct and indirect cytotoxicity assays have been performed with human bone osteosarcoma cells (U2OS) and human fetal pre-osteoblasts (hFOB), as well as the quantification of oxygen and nitrogen reactive species (RONS) engendered from cells in response to the materials. Finally, the DNA damage of U2OS cells upon contact with the bioactive glass has been evaluated in order to verify any selective cytotoxic activity of functionalized materials against cancer cells. Results showed a selective cytotoxic activity of functionalized bioactive glasses toward osteosarcoma cells that was particularly evident when cells were cultivated directly onto glasses surface. Moreover, the presence of grafted polyphenols increased the RONS production and induced a permanent DNA damage on the U2SOS cells while they promote a certain anti-inflammatory action toward hFOB. These preliminary results suggest polyphenols grafted bioactive glasses as promising material for bone substitution in cancer treatment.