Dimyristoylphosphatidylcholine Monolayers Research Articles

Effects of curcumin in the interaction with cardiolipin-containg lipid monolayers and bilayers

Curcumin, a plant polyphenol extracted from the Chinese herb turmeric, has gained widespread attention in recent years because of its multifunctional properties as antioxidant, antinflammatory, antimicrobial, and anticancer agent. Effects of the molecule on mitochondrial membranes properties have also been evidenced. In this work, the interaction of curcumin with models of mitochondrial membranes composed of dimyristoylphosphatidylcholine (DMPC) or mixtures of DMPC and 4 mol% tetramyristoylcardiolipin (TMCL) has been investigated by using biophysical techniques. Spectrophotometry and fluorescence allowed to determine the association constant and the binding energy of curcumin with pure DMPC and mixed DMPC/TMCL aqueous bilayers. The molecular organization of pure DMPC and cardiolipin-containing Langmuir monolayers at the air-water interface were investigated and the morphology of the monolayers transferred into mica substrates were characterized through atomic force microscopy (AFM). It is found that curcumin associates at the polar/apolar interface of the lipid bilayers and the binding is favored in the presence of cardiolipin. At 2 mol%, curcumin is well miscible with lipid monolayers, particularly with mixed DMPC/TMCL ones, where compact terraces formation characterized by a reduction of the surface roughness is observed in the AFM topographic images. At 10 mol%, curcumin perturbs the stability of DMPC monolayers and morphologically are evident terraces surrounded by cur aggregates. In the presence of TMCL, very few curcumin aggregates and larger compact terraces are observed. The overall results indicate that cardiolipin augments the incorporation of curcumin in model membranes highlighting the mutual interplay cardiolipin-curcumin in mitochondrial membranes.

First quantitative assessment of the adsorption of a fluorocarbon gas on phospholipid monolayers at the air/water interface

HypothesisFluorocarbon gases introduced above monolayers of phospholipids at the air/water interface were recently found to promote the adsorption of diverse molecular compounds, with potential application in drug-loaded microbubble design. Quantitative determination of the fluorocarbon present in the monolayers is strongly needed for the development of such applications. We hypothesized that neutron reflectometry (NR) and ellipsometry experiments would allow quantification of the fluorocarbon trapped in the monolayers. ExperimentsWe report the first quantitative determination of the extents of adsorption of perfluorohexane (F-hexane) on different phospholipid monolayers with respect to both their phase and isotopic form. To this aim, we applied an approach based on co-modeling the data obtained from NR and ellipsometry. FindingsWe found that F-hexane adsorbs strongly in monolayers of dipalmitoylphosphatidylcholine (DPPC) when they are both in the liquid expanded (LE) and liquid condensed (LC) phases, but to different extents according to the isotopic form of the phospholipid. Kinetic resolution of the interfacial composition from data on both isotopic contrasts (assuming chemical identicality) was therefore not possible using NR alone, so an alternative NR/ellipsometry co-modeling treatment was applied to data from each isotopic contrast. F-hexane adsorbs more abundantly on monolayers of hydrogenous DPPC than chain-deuterated DPPC when they are in the LE phase, whilst the opposite was observed when they monolayers are in the LC phase. The extents of adsorption of F-hexane in monolayers of dimyristoylphosphatidylcholine (DMPC, LE phase) and distearoylphosphatidylcholine (DSPC, LC phase) concurs with the strong dependence of those with phospholipids of different isotopic contrasts according to the monolayer phase. This new methodology can lead to advances in the novel characterization of fluorocarbons interacting with phospholipid monolayers of relevance to applications such as in the shells of fluorocarbon-stabilized medically-oriented microbubbles.

Effect of Escherichia coli on phospholipid monolayers: surface tensiometry and Brewster angle microscopy measurements.

The effect of Escherichia coli (E. coli) cells on two phospholipids [dipalmitoyl phosphatidylcholine (DPPC) and dimyristoyl phosphatidylcholine (DMPC)] monolayers at the surface of a 1.5wt% NaCl salt solution has been investigated using surface tension measurement and Brewster angle microscopy. The results showed that a DPPC monolayer that has an elastic structure was changed in morphology by interaction with E. coli cells, whereas a DMPC monolayer that has an expandable structure did not change in morphology. In particular, the morphology changed significantly around the liquid-expanded (LE)-liquid-condensed (LC) phase transition point for the DPPC monolayer. It was found that the LE-LC phase transition range in a DPPC monolayer was sensitive to influence from the outside of the monolayer such as the action of E. coli cells. Such a monolayer has the potential for application as a membrane sensor for detecting a small amount of bacteria in a short time.

Structural Change in Dimyristoyl Phosphatidyl Choline (DMPC) Molecule Alkyl Chains on the Addition of Cholesterol to DMPC Monolayer: Specific Addition Effect of Cholesterol

We have investigated the morphology of dimyristoyl phosphatidyl choline (DMPC)—cholesterol mixed monolayer formed on the water surface by dropping method using surface tension measurement (STm), Brewster angle microscopy (BAM), and infrared external reflection spectroscopy (IERS). STm results showed negative deviation of the limiting molecular area (A0) of cholesterol occurred when cholesterol was added to the DMPC monolayer. BAM images showed the expandable DMPC monolayer changed to the condensed rigid monolayer at more than cholesterol mole fraction (xChol) 0.4. IERS recordings showed that the addition of cholesterol at xChol = 0.4 occurred structural change from gauche- to trans- conformation of two DMPC molecule alkyl chains. From these results, it is found that cholesterol molecule has specific properties that cause structural transition of DMPC molecule alkyl chains.

Interaction of Artepillin C with model membranes.

Green propolis, a mixture of beeswax and resinous compounds processed by Apis mellifera, displays several pharmacological properties. Artepillin C, the major compound in green propolis, consists of two prenylated groups bound to a phenyl group. Several studies have focused on the therapeutic effects of Artepillin C, but there is no evidence that it interacts with amphiphilic aggregates to mimic cell membranes. We have experimentally and computationally examined the interaction between Artepillin C and model membranes composed of dimyristoylphosphatidylcholine (DMPC) because phosphatidylcholine (PC) is one of the most abundant phospholipids in eukaryotic cell membranes. PC is located in both outer and inner leaflets and has been used as a simplified membrane model and a non-specific target to study the action of amphiphilic molecules with therapeutic effects. Experimental results indicated that Artepillin C adsorbed onto the DMPC monolayers. Its presence in the lipid suspension pointed to an increased tendency toward unilamellar vesicles and to decreased bilayer thickness. Artepillin C caused point defects in the lipid structure, which eliminated the ripple phase and the pre-transition in thermotropic chain melting. According to molecular dynamics (MD) simulations, (1) Artepillin C aggregated in the aqueous phase before it entered the bilayer; (2) Artepillin C was oriented along the direction normal to the surface; (3) the negatively charged group on Artepillin C was accommodated in the polar region of the membrane; and (4) thinner regions emerged around the Artepillin C molecules. These results help an understanding of the molecular mechanisms underlying the biological action of propolis.

Lipophilic prodrug of paclitaxel: Interaction with a dimyristoylphosphatidylcholine monolayer

Interactions between paclitaxel and its squalenoyl prodrug with dimyristoylphosphatidylcholine (DMPC) monolayer at the air/water interface were studied. Paclitaxel is an antineoplastic drug, largely used as anti-cancer agents. Because its low aqueous solubility, Cremophor EL is used as excipient for its formulation. However, it has been shown that Cremophor causes serious side effects. Several attempts have been made to develop a safer formulation such as the synthesis of lipophilic prodrug. In particular we have synthesized a paclitaxel prodrug obtained by conjugation with 1,1,2-trisnorsqualenoic acid to improve the physico-chemical properties of this antineoplastic drug. The miscibility of these compounds with DMPC monolayer were studied analyzing thermodynamic properties as well as excess Gibbs free energies, compressibility modulus and mixed monolayer isotherms. The results allowed to evaluate the spatial organization of the compounds and suggested that the prodrug can efficiently be incorporated in the DMPC monolayer.

Study of the influence of ascorbyl palmitate and amiodarone in the stability of unilamellar liposomes

Amiodarone (AMI) is a low water-solubility drug, which is very useful in the treatment of severe cardiac disease. Its adverse effects are associated with toxicity in different tissues. Several antioxidants have been shown to reduce, and prevent AMI toxicity. The aim of this work was to develop and characterize Dimyristoylphosphatidylcholine (DMPC) liposomal carriers doped with ascorbyl palmitate (Asc16) as antioxidant, in order to either minimize or avoid the adverse effects produced by AMI. The employment of liposomes would avoid the use of cosolvents in AMI formulations, and Asc16 could minimize the adverse effects of AMI. To evaluate the partition and integration of AMI and Asc16 in lipid membranes, penetration studies into DMPC monolayers were carried out. The disturbance of the liposomes membranes was studied by generalized polarization (GP). The stability of liposomes was evaluated experimentally and by means of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The size particle and zeta potential (ζ) values of the liposomes were used for application in calculations for attractive and repulsive forces in DLVO theory. In experimental conditions all of these vesicles showed stability at time 0, but only DMPC + Asc16 10% + AMI 10% liposomes kept their size stable and ζ during 28 days. These results are encouraging and suggest that such systems could be suitable for AMI delivery formulations.

Water defects induced by expansion and electrical fields in DMPC and DMPE monolayers: Contribution of hydration and confined water

The values of capacitance of dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidylethanolamine (DMPE) monolayers on Hg, derived from cyclic voltammetry studies indicate that when the lipids are near the phase transition temperature fractures are formed at a critical area beyond that corresponding to the hydration shell of the lipids in the liquid expanded state. Similar fractures are inferred to be formed when an electric field is applied at constant area, at a breaking potential which is a function of the lipid species. These voltage values denote that energy involved in the transition induced by the electrical field is much higher for DMPE than for DMPC at low areas. This can be explained by the higher intermolecular lateral interactions by H-bonds between the ethanolamine and phosphate groups. However, at larger areas, the energy values for DMPC are as high as for DMPE which is understood to be due to the higher hydration of phosphocholine head groups. This finding gives a new insight in relation to the dynamics of the lipid head groups at the membrane interphase region in terms of the states of water between the lipids. This is congruent with previous results evaluated with the well known ΔΠ vs. surface pressure plots in monolayers of the same lipids at air-water interfaces.

Binding to the lipid monolayer induces conformational transition in Aβ monomer

Using implicit solvent atomistic model and replica exchange molecular dynamics, we study binding of Aβ monomer to zwitterionic dimyristoylphosphatidylcholine (DMPC) lipid monolayer. Our results suggest that Aβ binding to the monolayer is governed primarily by positively charged and aromatic amino acids. Lysine residues tend to interact with surface choline and phosphorous lipid groups, whereas aromatic amino acids penetrate deeper into the monolayer, reaching its hydrophobic core. We show that binding to the DMPC monolayer causes a dramatic conformational transition in Aβ monomer, resulting in chain extension, loss of intrapeptide interactions, and formation of β-structure. This conformational transition is far more significant than that occurring during the initial stages of aggregation in water. We also found that Aβ binding perturbs surface ordering of lipids interacting with Aβ.

Nicotinamide and picolinamide in phospholipid monolayers

AbstractMolecular dynamics simulations have been performed to investigate the interactions between nicotinamide (NA) and picolinamide (PA) with Langmuir monolayers of zwitterionic lipids: dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidylethanolamine (DMPE). Our results for the DMPC monolayers show that both NA and PA molecules are essentially found at the lipid/water interface and present orientational disorder of the molecules. In the case of DMPE monolayers, the pyridine nitrogen seems to be located deeper inside the monolayer than the amide group, for both isomers, being the effect higher for PA. We have computed electrostatic surface potentials and found qualitatively good agreement with experimental results. The different orientation and specific interactions of each molecule determine changes in the head orientation of the phospholipids, as the case of PA in DMPE monolayers, or in the orientation of the water dipoles, as it is the case of PA in DMPC monolayers. Through these analyses, we were able to capture the main contributions to the electrostatic potential in each system. © 2012 Wiley Periodicals, Inc.

Effects of Perfluorocarbon Gases on the Size and Stability Characteristics of Phospholipid-Coated Microbubbles: Osmotic Effect versus Interfacial Film Stabilization

Micrometer-sized bubbles coated with phospholipids are used as contrast agents for ultrasound imaging and have potential for oxygen, drug, and gene delivery and as therapeutic devices. An internal perfluorocarbon (FC) gas is generally used to stabilize them osmotically. We report here on the effects of three relatively heavy FCs, perfluorohexane (F-hexane), perfluorodiglyme (F-diglyme ), and perfluorotriglyme (F-triglyme), on the size and stability characteristics of microbubbles coated with a soft shell of dimyristoylphosphatidylcholine (DMPC) and on the surface tension and compressibility of DMPC monolayers. Monomodal populations of small bubbles (~1.3 ± 0.2 μm in radius, polydispersivity index ~8%) were prepared by sonication, followed by centrifugal fractionation. The mean microbubble size, size distribution, and stability were determined by acoustical attenuation measurements, static light scattering, and optical microscopy. The half-lives of F-hexane- and F-diglyme-stabilized bubbles (149 ± 8 and 134 ± 3 min, respectively) were about 2 times longer than with the heavier F-triglyme (76 ± 7 min) and 4-5 times longer than with air (34 ± 3 min). Remarkably, the bubbles are smaller than the minimal size values calculated assuming that the bubbles are stabilized osmotically by the insoluble FC gases. Particularly striking is that bubbles 2 orders of magnitude smaller than the calculated collapse radius can be prepared with F-triglyme, while its very low vapor pressure prohibits any osmotic effect. The interface between an aqueous DMPC dispersion and air, or air (or N(2)) saturated with the FCs, was investigated by tensiometry and by Langmuir monolayer compressions. Remarkably, after 3 h, the tensions at the interface between an aqueous DMPC dispersion (0.5 mmol L(-1)) and air were lowered from ~50 ± 1 to ~37 ± 1 mN m(-1) when F-hexane and F-diglyme were present and to ~40 ± 1 mN m(-1) for F-triglyme. Also noteworthy, the adsorption kinetics of DMPC at the interface, as obtained by dynamic tensiometry, were accelerated up to 3-fold when the FC gases were present. The compression isotherms show that all these FC gases significantly increase the surface pressure (from ~0 to ~10 mN m(-1)) at large molecular areas (70 Å(2)), implying their incorporation into the DMPC monolayer. All three FC gases increase the monolayer's collapse pressures significantly (~61 ± 2 mN m(-1)) as compared to air (~54 ± 2 mN m(-1)), providing for interfacial tensions as low as ~11 mN m(-1) (vs ~18 mN m(-1) in their absence). The FC gases increase the compressibility of the DMPC monolayer by 20-50%. These results establish that, besides their osmotic effect, FC gases contribute to bubble stabilization by decreasing the DMPC interfacial tension, hence reducing the Laplace pressure. This contribution, although significant, still does not suffice to explain the large discrepancy observed between calculated and experimental bubble half-lives. The case of F-triglyme, which has no osmotic effect, indicates that its effects on the DMPC shell (increased collapse pressure, decreased interfacial tension, and increased compressibility) contribute to bubble stabilization. F-hexane and F-diglyme provided both the smallest mean bubble sizes and the longest bubble half-lives.

Synthesis of n-squalenoyl cytarabine and evaluation of its affinity with phospholipid bilayers and monolayers

Cytarabine (1-β- d-arabinofuranosylcytosine, Ara-C), a pyrimidine nucleoside analogue, is an attractive therapeutic agent for the treatment of both acute and chronic myeloblastic leukemias. 1,1′,2- tris- nor-Squalene acid (squaleneCOOH) has been conjugated to cytarabine with the formation of the squalenoyl-cytarabine prodrug, in order to improve the drug lipophilicity and, consequently, the affinity towards the environment of biological membranes, as well as of lipophilic carriers. The interaction of cytarabine and its prodrug with dimyristoylphosphatidylcholine (DMPC) multilamellar vesicles and monolayers has been studied by the differential scanning calorimetry and the Langmuir–Blodgett techniques. The interaction has been evaluated considering the effect of the compounds on the DMPC MLV and monolayers behaviour. The aim was to have information on the interaction of the drug and the prodrug with the biological membranes and on the possibility to use liposomes as carriers for the prodrug. The results showed an improved affinity of the prodrug with MLV and monolayers with respect to the free drug.

Comparative study of the interaction of synthetic methionine-enkephalin and its amidated derivate with monolayers of zwitterionic and negatively charged phospholipids

Using Langmuir's monolayer technique, the surface behavior and the interaction of the synthetic neuropeptide methionine-enkephalin (Met-enk) and its amidated derivate (Met-enk-NH(2)) with monolayers of the zwitterionic dimyristoylphosphatidylcholine (DMPC) and the negatively charged dimyristoylphosphatidylglycerol (DMPG) were studied. The surface tension (γ, mN/m) of DMPG and DMPC monolayers as a function of time (after injection of the peptide under the interface) was detected. The decrease in γ values showed that there was a strong penetration effect of both types of Met-enk molecules into the monolayers, being significantly stronger for the amidated derivate, Met-enk-NH(2). We suggest that the interaction between the neuropeptides and DMPC was predominantly determined by peptides amphiphilicity, while the electrostatic forces play significant role for the insertion of the cationic Met-enk-NH(2) in DMPG monolayers, especially at high packing densities. Our results demonstrate the potential of lipid monolayers formed in Langmuir's trough to be successfully used as an elegant and simple membrane models to study lipid-peptide interactions at the air/water interface.

Rheological Properties of a Two Phase Lipid Monolayer at the Air/Water Interface: Effect of the Composition of the Mixture

Many biologically relevant monolayers show coexistence of discrete domains of a long-range ordered condensed phase dispersed in a continuous, disordered, liquid-expanded phase. In this work, we determined the viscous and elastic components of the compressibility modulus and the shear viscosity of monolayers exhibiting phase coexistence with the aim at elucidating the contribution of each phase to the observed monolayer mechanical properties. To this purpose, mixed monolayers with different proportions of distearoylphosphatidylcholine (DSPC) and dimyristoylphosphatidylcholine (DMPC) were prepared and their rheological properties were analyzed. The relationship between the phase diagram of the mixture at 10 mN m(-1) and the rheological properties was studied. We found that the monolayer shear viscosity is highly dependent on the presence of domains and on the domain density. In turn, the monolayer compressibility is only influenced by the presence of domains for high domain densities. For monolayers that look homogeneous on the micrometer scale (DSPC amount lower that 23 mol %), all the analyzed rheological properties remain similar to those observed for pure DMPC monolayers, indicating that in this proportion range the DSPC molecules contribute as DMPC to the surface rheology in spite of having hydrocarbon chains four carbons longer.

Mechanism of formation of vesicle fused phospholipid monolayers on alkanethiol self-assembled monolayer supports

We investigated the process of phospholipid vesicle fusion to a hydrophobic surface using electrochemical impedance spectroscopy (EIS) and atomic force microscopy (AFM). The kinetics of the fusion of dimyristoyl phosphatidylcholine (DMPC) vesicles to an octadecanethiol (ODT) self-assembled monolayer (SAM) was followed with EIS and found to be slower than previously reported observations by surface plasmon resonance. AFM images of the DMPC layer taken at various stages of completion show they are uniform with topography similar to that of the bare ODT SAM. The AFM was used in contact mode to scrape away a portion of a completed DMPC monolayer and the hole was stable for several hours. Surprisingly, the hole remained stable even after the temperature of the system was raised to 38 °C, well above the gel transition temperature for DMPC of 23 °C. We were unable to scrape holes in the partially completed monolayers. We conclude that in the early stages of monolayer growth the DMPC molecules spread across the ODT surface after vesicle fusion rather than remaining in dense islands. However, when the DMPC monolayer is complete this mobility is lost and the DMPC will not spread into a vacant area.

Comparative Study of the Interaction Between Synthetic Methionine-Enkephalin and Monolayers of Zwitterionic and Negatively Charged Phospholipids

ABSTRACTUsing Langmuir's monolayer technique, surface behaviour and the interaction between a synthetic analogue of endogenous neuropeptide Methionine-enkephalin (Met-enk) and zwitterionic dimyristoylphosphatidylcholine (DMPC), and the negatively charged dimyristoylphosphatidylglycerol (DMPG) at air/water interface are studied. By using the Wilhelmy method, surface tension (γ, mN/m) changes (after injection of the peptide under the interface) of DMPG and DMPC monolayers as a function of time at given molecular area are detected. The decrease in γ values shows that there is a strong penetration effect of Met-enk molecules into the monolayers. The comparison of the interaction between the hydrophobic pentapeptide and both phospholipid monolayers shows that the enkephalin interacts similarly with DMPG and DMPC molecules, and that the ability of Met-enk to penetrate correlates with the given surface area per lipid molecule. Based on the results obtained we suggest that in case of liquid-expanded monolayers the electrostatic attraction facilitates the interaction between the neuropeptide and the negatively charged phospholipids (DMPG), while at more compact ordering of lipid molecules the penetration of the enkephalin is preliminary due to hydrophobic interactions.

Interaction of Oxicam NSAIDs with lipid monolayer: Anomalous dependence on drug concentration

Surface pressure ( π) versus specific molecular area ( A) isotherms of Langmuir monolayers of dimyristoylphosphatidylcholine (DMPC) lipid on pure water were studied in pristine form and in presence of three non-steroidal anti-inflammatory drugs, meloxicam (MX), piroxicam (PX) and tenoxicam (TX) in the subphase. Data were taken at three drug/lipid (D/L) ratios of 0.026, 0.05, and 0.1. Integration of drug to the lipid monolayer was measured by the increase in A (Δ A) of DMPC monolayer due to the presence of drugs. All three drugs could be integrated in the monolayer resulting in a positive value of Δ A for D/L ratio of 0.026. Above this D/L value, there is an anomalous, monotonic decrease in Δ A for MX and TX resulting, finally, in negative Δ A values. For PX, however, decrease in Δ A values at D/L of 0.05 is partially compensated at D/L of 0.1. We have tentatively explained these observations by invoking two competing forces in the overall drug–lipid interaction. One of these is an ‘in-plane’ force that tends to integrate the drug molecule to the plane formed by the lipid monolayer and the other is an ‘out-of-plane’ force that perturbs the drug and the lipid molecules such that the monolayer plane is no longer well defined.

Effect of trehalose on the contributions to the dipole potential of lipid monolayers

The dipole potential and the area changes induced by trehalose on dimyristoyl phosphatidylcholine (DMPC), 1,2-di- O-tetradecyl-sn-glycero-3-phosphocholine (dietherPC), dimyristoyl phosphatidylethanolamine (DMPE), 1,2-di- O-tetradecyl-sn-glycero-3-phosphoethanolamine (dietherPE) monolayers have been studied at different temperatures. The insertion of trehalose into DMPC monolayers in the fluid and gel states requires of the presence of carbonyl groups. The area increase observed at 0.15 M trehalose is congruent with the decrease in the dipole potential. However, in dietherPC, in which trehalose does not affect the area, a decrease in the dipole potential is also observed. This is interpreted as a result of the displacement of water from the phosphate groups exposed to the aqueous phase. In DMPE, trehalose also decreases the dipole potential without affecting the area of saturated monolayers and in dietherPE no effect on dipole potential and area was observed. It is concluded that the spacer effect of trehalose depends on the specific interaction with CO, which is modulated by the strength of the interaction of the PO groups with lateral NH groups. However, it is not the only contribution to the dipole potential decrease.

Superficially active water in lipid membranes and its influence on the interaction of an aqueous soluble protease

The purpose of this paper is to demonstrate that the interaction of an aqueous soluble enzyme with lipid membranes is influenced by the lipid composition of the interphase. The results show that the interaction of an aqueous soluble protease, Rennet from Mucor miehei, depends on the exposure of the carbonyl and phosphate groups at the membrane interphase. The changes produced by the protease on the surface pressure of monolayers of dimyristoylphosphatidylcholine (DMPC); dioleoylphosphatidylcholine (DOPC); diphytanoylphosphatidylcholine (DPhPC); dipalmitoylphosphatidylcholine (DPPC); di- O-tetradecylphosphatidyl-choline [D(ether)PC]; dimyristoylphosphatidylethanolamine (DMPE); di- O-tetradecyl-phosphatidylethanolamine [D(ether)PE] were measured at different initial surface pressures. The meaning of the Δ Π vs. Π curves was interpreted in the light of the concept of interphase given by Defay and Prigogine [R. Defay, I. Prigogine, Surface Tension and Adsorption, John Wiley & Sons, New York, 1966, pp. 273–277] considering the interphase as a bidimensional solution of polar head groups. With this approach, and based on reported evidences that carbonyls and phosphates are the main hydration sites of the lipid membranes, it is suggested that the mechanism of interaction of aqueous soluble protein involves water beyond the hydration shell. At high surface pressure, only water strongly bound to carbonyl and phosphate groups is present and the interaction is not occurring. In contrast, at low surface pressures, the protease-membrane interaction is a function of acyl chain for different polar groups. This is interpreted, as a consequence of the changes in the interfacial tension produced by the displacement of water confined between the hydrated head groups.

Effect of arbutin on the dipole potential and area per lipid of ester and ether phosphatidylcholine and phosphatidyl ethanolamine monolayers

The present results report for the first time a systematic study of the effect of arbutin on the dipole potential of lipid membranes. The dipole potential and the area per lipid were measured in monolayers of dimyristoylphosphatidylcholine (DMPC), 1,2-di- O-tetradecyl- sn-glycero-3-phosphocholine (dietherPC), dimyristoylphosphatidylethanolamine (DMPE) and 1,2-di- O-tetradecyl- sn-glycero-3-phosphoethanolamine (dietherPE), spread on aqueous solutions of different concentrations of arbutin. The decrease of the dipole potential of DMPC, both in condensed and expanded monolayers, is parallel to an increase in the area per lipid. In contrast, for dietherPC, the area per lipid is not affected, in spite of the fact that arbutin is also able to decrease the dipole potential in a less drastic extent. In the case of DMPE, the response is similar to that observed with dietherPC: the dipole potential decreases, while the area per lipid remains unchanged. However, when the carbonyl groups are absent in phosphatidylethanolamine derivatives such as the dietherPE, the dipole potential is not affected by arbutin, with a small decrease in the area. The effect of arbutin on the dipole potential differs from that of sucrose, trehalose and phloretin and is congruent with previous results obtained by FTIR on its interaction with the CO groups. Arbutin binding is interpreted in terms of the exposure to water of the phosphate and carbonyl groups at the membrane interface of the different monolayers.