Dimethyl Sulfoxide Concentration Research Articles

Evaluating the affect of dimethyl sulfoxide on the viablity of H9C2 cardiomyocytes

Objective: The study was conducted to evaluate the affect of Dimethyl Sulfoxide (DMSO) concentration on the viability of H9C2 cells under the different cultural conditions.
 Methods: H9C2 cells were cultured under normal conditions and subjected to hypoxia/reoxygenation model. DMSOat the doses of 0,001÷10% (v/v) was added to the cultural medium during normal culture period and reoxygenation period. Cellular viability of the experimental groups was assessed by using CCK-8 kit.
 Results: The results indicated that the viability of H9C2 cardiomyocytes was stable in the different culture media supplied with DMSO at the doses of0,001÷0,5% (v/v). Meanwhile, supplementation of DMSO at the doses of1% and 2% significantly decreased the survival rate of H9C2 cells (v/v,p<0,05).
 Conclusion: The affect of DMSO on H9C2 cardiomyocytes is dose-dependant maner.

A simple and efficient cryopreservation method for mouse small intestinal and colon organoids for regenerative medicine

Organoid cryopreservation method is one of key step in the organoid culture. We aimed to establish a simple and efficient cryopreservation method for mouse small intestinal organoids (MIOs) and colon organoids (MCOs) using various concentrations of cryoprotectant. Based on the theoretical simulation, we optimized the dimethyl sulfoxide (DMSO) concentration by pretreating the organoids with 5, 7.5, and 10% DMSO for 30 min at 4 °C to allow penetration into the organoids and evaluated their viability, proliferation, and function after cryopreservation. Gene expression in the MIOs and staining of lineage markers were examined real-time PCR. The organoids in the DMSO-treated groups as well as the control, expressed ChrgA, Ecad, Muc2, Lyz, villin, and Lgr5, and there are no significant. A forskolin-induced swelling assay for MIOs was performed to confirm normal cystic fibrosis transmembrane conductance regulator (CFTR) activity. Similar forskolin-induced swelling was observed in the DMSO-treated groups and the control. In addition, MCOs were transplanted into mouse colon for confirmation of regeneration therapy efficacy. Thawing organoids were cultured for two and four sequential passages after cryopreservation with 5% DMSO to confirm any changes in the gene expression of lineage markers after subculture. We developed a simple and efficient organoid freezing method using 5% DMSO with low potential toxicity and validated our findings with theoretical simulation.

Assessment of the Impact of Post-Thaw Stress Pathway Modulation on Cell Recovery following Cryopreservation in a Hematopoietic Progenitor Cell Model.

The development and use of complex cell-based products in clinical and discovery science continues to grow at an unprecedented pace. To this end, cryopreservation plays a critical role, serving as an enabling process, providing on-demand access to biological material, facilitating large scale production, storage, and distribution of living materials. Despite serving a critical role and substantial improvements over the last several decades, cryopreservation often remains a bottleneck impacting numerous areas including cell therapy, tissue engineering, and tissue banking. Studies have illustrated the impact and benefit of controlling cryopreservation-induced delayed-onset cell death (CIDOCD) through various “front end” strategies, such as specialized media, new cryoprotective agents, and molecular control during cryopreservation. While proving highly successful, a substantial level of cell death and loss of cell function remains associated with cryopreservation. Recently, we focused on developing technologies (RevitalICE™) designed to reduce the impact of CIDOCD through buffering the cell stress response during the post-thaw recovery phase in an effort to improve the recovery of previously cryopreserved samples. In this study, we investigated the impact of modulating apoptotic caspase activation, oxidative stress, unfolded protein response, and free radical damage in the initial 24 h post-thaw on overall cell survival. Human hematopoietic progenitor cells in vitro cryopreserved in both traditional extracellular-type and intracellular-type cryopreservation freeze media were utilized as a model cell system to assess impact on survival. Our findings demonstrated that through the modulation of several of these pathways, improvements in cell recovery were obtained, regardless of the freeze media and dimethyl sulfoxide concentration utilized. Specifically, through the use of oxidative stress inhibitors, an average increase of 20% in overall viability was observed. Furthermore, the results demonstrated that by using the post-thaw recovery reagent on samples cryopreserved in intracellular-type media (Unisol™), improvements in overall cell survival approaching 80% of non-frozen controls were attained. While improvements in overall survival were obtained, an assessment on the impact of specific cell subpopulations and functionality remains to be completed. While work remains, these results represent an important step forward in the development of improved cryopreservation processes for use in discovery science, and commercial and clinical settings.

Effect of DMSO on lifespan and physiology in C. elegans : Implications for use of DMSO as a solvent for compound delivery.

Dimethyl sulfoxide (DMSO) is a solvent that has been used for basic and medical research based on its ability to dissolve both polar and non-polar compounds. In order to use DMSO to deliver compounds that may impact longevity or neurodegeneration, it is important to first determine the effects of DMSO on aging and physiology. We examined the effect of different concentrations of DMSO on lifespan and development time in C. elegans. We found that DMSO concentrations up to 2% DMSO did not affect longevity in wild-type worms, while concentrations of up to 0.5% DMSO were compatible with normal development times. 0.5% DMSO also had minimal effect on fertility and movement. In summary, our results show that concentrations of DMSO up to 0.5% can be safely used to deliver compounds to C. elegans with little or no modifying effects on lifespan or physiologic rates.

On crystallization of water confined in liposomes and cryoprotective action of DMSO.

In this work, the phase behavior of cryoprotective mixtures based on dimethyl sulfoxide (DMSO) mixed with a lipid bilayer consisting of dimyristoyl phosphatidylcholine (DMPC) was studied. This system represented a model of a biological cell and its membrane. The aim of the work was to clarify the origin of the cryoprotective action of low-concentrated mixtures (1–10 vol%) DMSO in water, representing mixtures used in cryopreservation in cell therapy. The combination of experimental techniques of differential scanning calorimetry (DSC) and positron annihilation lifetime spectroscopy (PALS) allowed a study of crystallization behavior of water confined in liposomes imitating the intracellular environment. The ability of liposomes to show the fundamental aspects of water phase behavior seen during freezing of biological cells was proved. The presence of an amorphous freeze-concentrated phase of DMSO in the frozen state was confirmed and its possible crystallization into the DMSO trihydrate and ice during thawing was demonstrated. Correlation between the critical temperature range for the loss of cell viability during slow thawing and the temperatures of freeze-concentrated phase crystallization was found. Based on this finding, possible mechanisms of DMSO cryoprotection are discussed with support brought by results for the studied model system. Quantification of the ice phase fraction in the frozen mixtures revealed that even low concentrations of DMSO can induce a considerable decrease in the amount of ice present.

How cryoprotectants work: hydrogen-bonding in low-temperature vitrified solutions.

Dimethyl sulfoxide (DMSO) increases cell and tissue viability at low temperatures and is commonly used as a cryoprotectant for cryogenic storage of biological materials. DMSO disorders the water hydrogen-bond networks and inhibits ice-crystal growth, though the specific DMSO interactions with water are difficult to characterize. In this study, we use a combination of Fourier Transform infrared spectroscopy (FTIR), molecular dynamics simulations, and vibrational frequency maps to characterize the temperature-dependent hydrogen bonding interactions of DMSO with water from 30 °C to −80 °C. Specifically, broad peaks in O–D stretch vibrational spectra of DMSO and deuterated water (HDO) cosolvent systems show that the hydrogen bond networks become increasingly disrupted compared to pure water. Simulations demonstrated that these disrupted hydrogen bond networks remain largely localized to the first hydration shell of DMSO, which explains the high DMSO concentrations needed to prevent ice crystal formation in cryopreservation applications.

DMSO Concentrations up to 1% are Safe to be Used in the Zebrafish Embryo Developmental Toxicity Assay.

Dimethyl sulfoxide (DMSO) is a popular solvent for developmental toxicity testing of chemicals and pharmaceuticals in zebrafish embryos. In general, it is recommended to keep the final DMSO concentration as low as possible for zebrafish embryos, preferably not exceeding 100 μL/L (0.01%). However, higher concentrations of DMSO are often required to dissolve compounds in an aqueous medium. The aim of this study was to determine the highest concentration of DMSO that can be safely used in our standardized Zebrafish Embryo Developmental Toxicity Assay (ZEDTA). In the first part of this study, zebrafish embryos were exposed to different concentrations (0–2%) of DMSO. No increase in lethality or malformations was observed when using DMSO concentrations up to 1%. In a follow-up experiment, we assessed whether compounds that cause no developmental toxicity in the ZEDTA remain negative when dissolved in 1% DMSO, as false positive results due to physiological disturbances by DMSO should be avoided. To this end, zebrafish embryos were exposed to ascorbic acid and hydrochlorothiazide dissolved in 1% DMSO. Negative control groups were also included. No significant increase in malformations or lethality was observed in any of the groups. In conclusion, DMSO concentrations up to 1% can be safely used to dissolve compounds in the ZEDTA.

Evaluating the affect of dimethyl sulfoxide on the viablity of H9C2 cardiomyocytes

Objective: The study was conducted to evaluate the affect of Dimethyl Sulfoxide (DMSO) concentration on the viability of H9C2 cells under the different cultural conditions.
 Methods: H9C2 cells were cultured under normal conditions and subjected to hypoxia/reoxygenation model. DMSOat the doses of 0,001÷10% (v/v) was added to the cultural medium during normal culture period and reoxygenation period. Cellular viability of the experimental groups was assessed by using CCK-8 kit.
 Results: The results indicated that the viability of H9C2 cardiomyocytes was stable in the different culture media supplied with DMSO at the doses of0,001÷0,5% (v/v). Meanwhile, supplementation of DMSO at the doses of1% and 2% significantly decreased the survival rate of H9C2 cells (v/v,p<0,05).
 Conclusion: The affect of DMSO on H9C2 cardiomyocytes is dose-dependant maner.

The Implication of Low Dose Dimethyl Sulfoxide on Mitochondrial Function and Oxidative Damage in Cultured Cardiac and Cancer Cells.

Although numerous studies have demonstrated the biological and multifaceted nature of dimethyl sulfoxide (DMSO) across different in vitro models, the direct effect of “non-toxic” low DMSO doses on cardiac and cancer cells has not been clearly explored. In the present study, H9c2 cardiomyoblasts and MCF-7 breast cancer cells were treated with varying concentrations of DMSO (0.001–3.7%) for 6 days. Here, DMSO doses < 0.5% enhanced the cardiomyoblasts respiratory control ratio and cellular viability relative to the control cells. However, 3.7% DMSO exposure enhanced the rate of apoptosis, which was driven by mitochondrial dysfunction and oxidative stress in the cardiomyoblasts. Additionally, in the cancer cells, DMSO (≥0.009) led to a reduction in the cell’s maximal respiratory capacity and ATP-linked respiration and turnover. As a result, the reduced bioenergetics accelerated ROS production whilst increasing early and late apoptosis in these cells. Surprisingly, 0.001% DMSO exposure led to a significant increase in the cancer cells proliferative activity. The latter, therefore, suggests that the use of DMSO, as a solvent or therapeutic compound, should be applied with caution in the cancer cells. Paradoxically, in the cardiomyoblasts, the application of DMSO (≤0.5%) demonstrated no cytotoxic or overt therapeutic benefits.

Sustainable and eco-friendly strategies for polyester-cotton blends dyeing in supercritical CO2

Traditional water medium dyeing of polyester-cotton fabrics consumes more water and energy, and causes serious environmental pollution in comparison with one-bath dyeing of single component fiber. To achieve sustainable dyeing of polyester-cotton blends, three reactive disperse dyes with s-triazine reactive group were synthesized, and supercritical CO2 was used as solvent to conduct the waterless dyeing. The results showed that one-bath dyeing of polyester-cotton blends could be successfully realized with the synthesized dyes. Dyeing performance of the synthesized dyes was constantly improved with the extension of carbon chain on aniline. Compared with other two dyes, the optimal color strength of polyester-cotton blends was obtained with dye 3 using dimethylsulfoxide as co-solvent, and K/S values up to 6.4 were obtained at 100 °C, 20 MPa and 120 min with a dimethylsulfoxide concentration of 80 %. σK/S values below 0.14 and washing and rubbing fastness above 4 were displayed for the colored samples. In addition, dyeing mechanism of polyester-cotton fabrics with the synthesized dyes was discussed combined with FT-IR measurement and stripping experiments.

Dual Properties of Polyvinyl Alcohol-Based Magnetorheological Plastomer with Different Ratio of DMSO/Water

Polyvinyl alcohol (PVA)-based magnetorheological plastomer (MRP) possesses excellent magnetically dependent mechanical properties such as the magnetorheological effect (MR effect) when exposed to an external magnetic field. PVA-based MRP also shows a shear stiffening (ST) effect, which is very beneficial in fabricating pressure sensor. Thus, it can automatically respond to external stimuli such as shear force without the magnetic field. The dual properties of PVA-based MRP mainly on the ST and MR effect are rarely reported. Therefore, this work empirically investigates the dual properties of this smart material under the influence of different solvent compositions (20:80, 40:60, 60:40, and 80:20) by varying the ratios of binary solvent mixture (dimethyl sulfoxide (DMSO) to water). Upon applying a shear stress with excitation frequencies from 0.01 to 10 Hz, the storage modulus (G′) for PVA-based MRP with DMSO to water ratio of 20:40 increases from 6.62 × 10−5 to 0.035 MPa. This result demonstrates an excellent ST effect with the relative shear stiffening effect (RSTE) up to 52,827%. In addition, both the ST and MR effect show a downward trend with increasing DMSO content to water. Notably, the physical state of hydrogel MRP could be changed with different solvent ratios either in the liquid-like or solid-like state. On the other hand, a transient stepwise experiment showed that the solvent’s composition had a positive effect on the arrangement of CIPs within the matrix as a function of the external magnetic field. Therefore, the solvent ratio (DMSO/water) can influence both ST and MR effects of hydrogel MRP, which need to be emphasized in the fabrication of hydrogel MRP for appropriate applications primarily with soft sensors and actuators for dynamic motion control.

DMSO-free highly differentiated HepaRG spheroids for chronic toxicity, liver functions and genotoxicity studies.

The liver is essential in the elimination of environmental and food contaminants. Given the interspecies differences between rodents and humans, the development of relevant in vitro human models is crucial to investigate liver functions and toxicity in cells that better reflect pathophysiological processes. Classically, the differentiation of the hepatic HepaRG cell line requires high concentration of dimethyl sulfoxide (DMSO), which restricts its usefulness for drug-metabolism studies. Herein, we describe undifferentiated HepaRG cells embedded in a collagen matrix in DMSO-free conditions that rapidly organize into polarized hollow spheroids of differentiated hepatocyte-like cells (Hepoid-HepaRG). Our conditions allow concomitant proliferation with high levels of liver-specific functions and xenobiotic metabolism enzymes expression and activities after a few days of culture and for at least 4weeks. By studying the toxicity of well-known injury-inducing drugs by treating cells with 1- to 100-fold of their plasmatic concentrations, we showed appropriate responses and demonstrate the sensitivity to drugs known to induce various degrees of liver injury. Our results also demonstrated that the model is well suited to estimate cholestasis and steatosis effects of drugs following chronic treatment. Additionally, DNA alterations caused by four genotoxic compounds (Aflatoxin B1 (AFB1), Benzo[a]Pyrene (B[a]P), Cyclophosphamide (CPA) and Methyl methanesulfonate (MMS)) were quantified in a dose-dependent manner by the comet and micronucleus assays. Their genotoxic effects were significantly increased after either an acute 24h treatment (AFB1: 1.5-6μM, CPA: 2.5-10μM, B[a]P: 12.5-50μM, MMS: 90-450μM) or after a 14-day treatment at much lower concentrations (AFB1: 0.05-0.2μM, CPA: 0.125-0.5μM, B[a]P: 0.125-0.5μM) representative to human exposure. Altogether, the DMSO-free 3D culture of Hepoid-HepaRG provides highly differentiated and proliferating cells relevant for various toxicological in vitro assays, especially for drug-preclinical studies and environmental chemicals risk assessment.

Effective conversion of fructose to 5-ethoxymethylfurfural with brønsted acid site (S/Cl)-functional carbon catalysts

Brønsted acid site (S/Cl)-functional carbon materials were prepared by ball-milling (bm) L-cysteine and ammonium chloride to form chemical complex solids, by post-heat treatment (Q) of the solids at 500 °C under a nitrogen gas atmosphere to stabilize and fortify amino and functional group solid structures and by post-oxidative treatment with H2O2 to add Brønsted acidity. The as-prepared carbon materials (S/Cl@bmxQy; x, y in hours) contained Brønsted acid sites (sulfonates, chlorides), oxygen-containing groups (-COOH, -OH) and amino functional groups. The S/Cl@bmxQy materials were applied as catalysts to promote conversion of fructose in ethanol solvent to 5-hydroxymethylfurfural (5-HMF) and 5-ethoxymethylfurfural (5-EMF). Among the carbon materials, S/Cl@bm3Q1 gave 5-EMF and 5-HMF yields of 67.0% and 22.8%, respectively, in pure ethanol at 140 °C for 24 h reaction time, while a reaction time of 18 h gave total 5-EMF and 5-HMF yields of 96.4%. Dimethyl sulfoxide (DMSO) was applied as additive to the ethanol-fructose- S/Cl@bm3Q1 reaction system which showed that 5-HMF product selectivity could be controlled with DMSO concentration. The protocol developed allows simple preparation of functional carbon materials that have high catalytic activity and are effective for conversion of fructose to 5-HMF and 5-EMF in ethanol.

Hydrophobic Cargo Encapsulation into Virus Protein Cages by Self-Assembly in an Aprotic Organic Solvent.

While extensive studies of virus capsid assembly in environments mimicking in vivo conditions have led to an understanding of the thermodynamic driving forces at work, applying this knowledge to virus assembly in other solvents than aqueous buffers has not been attempted yet. In this study, Brome mosaic virus (BMV) capsid proteins were shown to preserve their self-assembly abilities in an aprotic polar solvent, dimethyl sulfoxide (DMSO). This facilitated protein cage encapsulation of nanoparticles and dye molecules that favor organic solvents, such as β-NaYF4-based upconversion nanoparticles and BODIPY dye. Assembly was found to be robust relative to a surprisingly broad range of DMSO concentrations. Cargos with poor initial stability in aqueous solutions were readily encapsulated at high DMSO concentrations and then transferred to aqueous solvents, where they remained stable and preserved their function for months.

Effect of Organic Solvents on the Structure and Activity of a Minimal Lipase.

Lipases are ubiquitously used in chemo-enzymatic synthesis and industrial applications. Nevertheless, the modulation of the activity of lipases by organic solvents still is not fully understood at the molecular level. We systematically investigated the activity and structure of lipase A from Bacillus subtilis in binary water-organic solvent mixtures of dimethyl sulfoxide (DMSO), acetonitrile (ACN), and isopropyl alcohol (IPA) using activity assays, fluorescence spectroscopy, molecular dynamics (MD) simulations, and FRET/MD analysis. The enzymatic activity strongly depended on the type and amount of organic solvent in the reaction media. Whereas IPA and ACN reduced the activity of the enzyme, small concentrations of DMSO led to lipase activation via an uncompetitive mechanism. DMSO molecules did not directly interfere with the binding of the substrate in the active site, contrary to what is known for other solvents and enzymes. We propose that the His156-Asp133 interaction, the binding of organic molecules to the active site, and the water accessibility of the substrate are key factors modulating the catalytic activity. Furthermore, we rationalized the role of solvent descriptors on the regulation of enzymatic activity in mixtures with low concentrations of the organic molecule, with prospective implications for the optimization of biocatalytic processes via solvent tuning.

Enhanced Cellular Cryopreservation by Biopolymer-Associated Suppression of RhoA/ROCK Signaling Pathway.

With increasing demands on long-term storage of cells, cryopreservation of cells is gaining more importance in cell-based research and applications. Dimethyl sulfoxide (DMSO) is a commonly used chemical cryoprotectant, providing increased cell survival during the freezing process. However, its use is limited in clinical applications due to its low biocompatibility above cryogenic temperatures. Herein, we present a new approach for reducing the use of DMSO in cryopreservation by using biodegradable hyaluronic acids (HAs). By adding HAs into cryoprotectant media containing a low concentration of DMSO, higher cell viability and cell proliferation rate were observed upon thawing after cryopreservation. The HA-supplemented cryopreservation media did not reduce the size of the ice crystal, which significantly influenced cell viability during cell freezing, but decreased the Ras homolog family member A (RhoA)/Rho-associated protein kinase (ROCK) signaling pathway related to apoptosis. The cell-interactive cryoprotectants containing HA can be applied to the development of a new cryoprotectant that reduces the adverse effect of DMSO.

Dimethylsulfoniopropionate and dimethylsulfoxide in Posidonia oceanica

The present work aims at determining the natural variability of dimethylsulfoniopropionate (DMSP) and dimethylsulfoxide (DMSO) contents in the seagrass Posidonia oceanica, which is the largest producer of these molecules reported to date among coastal autotrophs. Seagrass leaf samples were collected during a period of 3.5 years in the pristine Revellata Bay (Calvi, northwestern Corsica, France). The DMSP content ranged from 25 to 265 µmol.gfw−1; DMSO from 1.0 to 13.9 µmol.gfw−1. The dynamics of the two molecules were closely linked, the DMSO content being equivalent to 3.5% of the DMSP content, all leaf samples considered (n = 423 samples and 414 DMSP(O) data pairs). The annual growth cycle of the seagrass diluted the initial stocks of the two molecules. Temperature indirectly affected molecule content dynamics through their direct effect on the seagrass productivity and biomass. Inter-annual variations in DMSP(O) content in relation to shallow water temperature might further indicate that DMSP(O) could have been involved in the physiological response of P. oceanica to heat stress. Finally, middle-aged leaf tissues with an organosulfur molecule content similar to the average value calculated for the seagrass leaf bundle appeared to be the best choice of sample material to study DMSP and DMSO in that species. More research is needed to elucidate the biosynthetic pathways of these molecules in seagrasses, the evolutionary reasons for such a high production in P. oceanica and the physiological functions they play.

Cosolvents Restrain Self-Assembly of a Fibroin-Like Peptide on Graphite.

Controllable self-assembly of peptides on solid surfaces has been investigated for establishing functional bio/solid interfaces. In this work, we study the influence of organic solvents on the self-assembly of a fibroin-like peptide on a graphite surface. The peptide has been designed by mimicking fibroin proteins to have strong hydrogen bonds among peptides enabling their self-assembly. We have employed cosolvents of water and organic solvents with a wide range of dielectric constants to control peptide self-assembly on the surface. Atomic force microscopy has revealed that the peptides self-assemble into highly ordered monolayer-thick linear structures on graphite after incubation in pure water, where the coverage of peptides on the surface is more than 85%. When methanol is mixed, the peptide coverage becomes zero at a threshold concentration of 30% methanol on graphite and 25% methanol on MoS2. The threshold concentration in ethanol, isopropanol, dimethyl sulfoxide, and acetone varies depending on the dielectric constant with restraining self-assembly of the peptides, and particularly low dielectric-constant protic solvents prevent the peptide self-assembly significantly. The observed phenomena are explained by competitive surface adsorption of the organic solvents and peptides and the solvation effect of the peptide assembly.

THE EFFECT OF DIMETHYLSULFOXIDE ON THE FLUORESCENCE PROPERTIES OF SOME 4-HYDROXYQUINOLINES

Fluorescence properties of 4-hydroxy-2-methylquinoline (1) and 2-(5-mercapto-1,3,4-oxadiazol-2-yl)-6-methylquinoline-4-ol (2) were studied in dimethylsulfoxide (DMSO) aqueous solutions. The fluorescence properties of 1 and 2 exhibit substantial dependence on the DMSO concentration. The fluorescence quantum yield $(\Phi_f)$ of 1 decreases upon adding DMSO due to the shift in the keto-enol (E) tautomeric equilibrium toward E form․ On the contrary 2 demonstrates a tendency of increase of $\Phi_f$ upon adding DMSO due to intermolecular charge transfer from DMSO to the aromatic ring of quinoline, which increases the electron density on the ring and hence the fluorescence efficiency.

Effect of bore fluid composition on poly(lactic-co-glycolic acid) hollow fiber membranes fabricated by dry-jet wet spinning

Poly(lactic-co-glycolic acid) (PLGA) is a widely used polymeric biomaterial due to its excellent biocompatibility and biodegradation. Asymmetric PLGA hollow fiber membranes (HFMs) have been extensively used as porous tubular scaffolds for tissue engineering, e.g. for nerve conduits and artificial blood vessels. PLGA HFMs are generally fabricated through a dry-jet wet spinning process, and the porous morphology of PLGA HFMs induced by polymer/solvent/nonsolvent ternary phase inversion plays a key role in their biomedical performance. In this study, PLGA was dissolved in dimethyl sulfoxide (DMSO) as the dope fluid, and deionized water with different DMSO contents was used as the bore fluid. The influence of bore fluid composition on the HFM morphology and performance was investigated by measuring phase separation time, porosity, mechanical properties, and in vitro hydrolytic degradation. The results indicated that with increased bore fluid DMSO content, the inner and outer diameters, as well as the wall thickness of the HFMs, decreased significantly; also, the inner surface became more porous and the inner surface pore size and porosity increased. Cross-sectional SEM images showed that the middle layer of the five-layered microstructure gradually changed from large voids to finger-like microvoids when the DMSO content in bore fluid increased from 0% to 60%. Furthermore, the HFMs resulting from higher DMSO content in bore fluid had a lower porosity, a faster degradation rate, a higher Young's modulus, and a lower suture retention strength. More importantly, the in vitro cell culture on the inner surface of PLGA HFMs showed that PC12 cells cultured on HFMs prepared with 60% DMSO bore fluid exhibited better cell adhesion, longer neurite length, and alignment along the HFM longitudinal axis. A ternary phase diagram and the Flory-Huggins theory were applied to analyze HFM morphological formation. The study contributes to understanding of the mechanism of HFM porous morphology formation and should guide potential application of PLGA HFMs as tissue engineering scaffolds.