Dimeric Constructs Research Articles

Strategic Construction of Sulfur-Bridged BODIPY Dimers and Oligomers as Heavy-Atom-Free Photosensitizers.

An efficient strategy for building sulfur-bridged oligo-BODIPYs based on the SNAr reaction is described. These oligo-BODIPYs showed broadband and strong visible-near-infrared (NIR) light absorption, strong intramolecular exciton coupling, and efficient intersystem crossing (ISC). Generation of 1O2 as well as O2•- under irradiation was found to give high reactive oxygen species generation efficiencies for those oligomers.

Structural basis of mechano-chemical coupling by the mitotic kinesin KIF14

KIF14 is a mitotic kinesin whose malfunction is associated with cerebral and renal developmental defects and several cancers. Like other kinesins, KIF14 couples ATP hydrolysis and microtubule binding to the generation of mechanical work, but the coupling mechanism between these processes is still not fully clear. Here we report 20 high-resolution (2.7–3.9 Å) cryo-electron microscopy KIF14-microtubule structures with complementary functional assays. Analysis procedures were implemented to separate coexisting conformations of microtubule-bound monomeric and dimeric KIF14 constructs. The data provide a comprehensive view of the microtubule and nucleotide induced KIF14 conformational changes. It shows that: 1) microtubule binding, the nucleotide species, and the neck-linker domain govern the transition between three major conformations of the motor domain; 2) an undocked neck-linker prevents the nucleotide-binding pocket to fully close and dampens ATP hydrolysis; 3) 13 neck-linker residues are required to assume a stable docked conformation; 4) the neck-linker position controls the hydrolysis rather than the nucleotide binding step; 5) the two motor domains of KIF14 dimers adopt distinct conformations when bound to the microtubule; and 6) the formation of the two-heads-bound-state introduces structural changes in both motor domains of KIF14 dimers. These observations provide the structural basis for a coordinated chemo-mechanical kinesin translocation model.

Dimeric CXCL12 (SDF‐1) binds to atypical chemokine receptor 1 (ACKR1/DARC)

The chemokine CXCL12/SDF-1 has diverse capability to influence leukocyte migration, tumor metastasis, and hematopoiesis, with signaling pathways previously described through a G-protein coupled receptor (CXCR4) and an atypical chemokine receptor (ACKR3). Here we show that CXCL12 as a dimer is also able to bind to the atypical chemokine receptor 1 (ACKR1), previously known as Duffy antigen/receptor for chemokines (DARC). Using nuclear magnetic resonance spectroscopy and isothermal titration calorimetry, we demonstrate that dimeric CXCL12 binds to the flexible, extracellular N-terminal domain of ACKR1 with low nanomolar affinity, while the binding affinity of monomeric CXCL12 is orders of magnitude lower. Furthermore, ACKR1-transfected cells and primary human Duffy-positive erythrocytes bound and internalized a dimeric CXCL12 construct (CXCL12-LD) but not a constitutively monomeric one (CXCL12-LM) in competition with a professional ligand. Together, these reveal a new interaction between CXCL12 and ACKR1, and provide another layer of regulation for the multiple biological functions of CXCL12, relevant especially in microenvironments with high CXCL12 concentration like the hematopoietic stem cell niche. The capability of ACKR1 to bind CXCL12 and potentially also other chemokines with altered affinity for the dimeric form offers new insights into mechanisms behind known functions of ACKR1 in the in the bone marrow and on venular endothelial cells.

Characterization of the motility of monomeric kinesin-5/Cin8

Cin8, the Saccharomyces cerevisiae kinesin-5, has an essential role in mitosis. In in vitro motility assays, tetrameric and dimeric Cin8 constructs showed bidirectional motility in response to ionic strength or Cin8 motor density. However, whether property-switching directionality is present in a monomeric form of Cin8 is unknown. Here we engineered monomeric Cin8 constructs with and without the Cin8-specific ∼99 residues in the loop 8 domain and examined the directionality of these constructs using an in vitro polarity-marked microtubule gliding assay within the range of the motor density or ionic strength. We found that both monomeric constructs showed only plus end-directed activity over the ranges measured, which suggested that minus end-directed motility driven by Cin8 is necessary for at least dimeric forms. Using an in vitro microtubule corkscrewing assay, we also found that monomeric Cin8 corkscrewed microtubules around their longitudinal axes with a constant left-handed pitch. Overall, our results imply that plus-end-directed and left-handed motor activity comprise the intrinsic properties of the Cin8 motor domain as with other monomeric N-kinesins.

Resolving the activation mechanism of the D99N antiterminator LicT protein

LicT is an antiterminator protein of the BglG family whose members are key players in the control of carbohydrate catabolism in bacteria. These antiterminators are generally composed of three modules, an N-terminal RNA-binding domain (CAT) followed by two homologous regulation modules (PRD1 and PRD2) that control the RNA binding activity of the effector domain via phosphorylation on conserved histidines. Although several structures of isolated domains of BglG-like proteins have been described, no structure containing CAT and at least one PRD simultaneously has yet been reported in an active state, precluding detailed understanding of signal transduction between modules. To fulfill this gap, we recently reported the complete NMR sequence assignment of a constitutively active mutant (D99N) CAT-PRD1*, which contains the effector domain and the first regulation domain of LicT. As a follow-up, we have determined and report here the 3D solution structure of this active, dimeric LicT construct (40 kDa). The structure reveals how the mutation constrains the PRD1 regulation domain into an active conformation which is transduced to CAT via a network of negatively charged residues belonging to PRD1 dimeric interface and to the linker region. In addition, our data support a model where BglG-type antitermination regulatory modules can only adopt a single conformation compatible with the active structure of the effector domain, regardless of whether activation is mediated by mutation on the first or second PRD. The linker between the effector and regulation modules appears to function as an adaptable hinge tuning the position of the functional modules.

Engineering couplings for exciton transport using synthetic DNA scaffolds

Summary Control over excitons enables electronic energy to be harnessed and transported for light harvesting and molecular electronics. Such control requires nanoscale precision over the molecular components. Natural light-harvesting systems achieve this precision through sophisticated protein machinery, which is challenging to replicate synthetically. Here, we introduce a DNA-based platform that spatially organizes cyanine chromophores to construct tunable excitonic systems. We synthesized DNA-chromophore nanostructures and characterized them with ensemble ultrafast and single-molecule spectroscopy and structure-based modeling. This synthetic approach facilitated independent control over the coupling among the chromophores and between the chromophores and the environment. We demonstrated that the coupling between the chromophores and the environment could enhance exciton transport efficiency, highlighting the key role of the environment in driving exciton dynamics. Control over excitons, as reported here, offers a path toward the development of designer nanophotonic devices.

A trimeric human angiotensin-converting enzyme 2 as an anti-SARS-CoV-2 agent.

Effective intervention strategies are urgently needed to control the COVID-19 pandemic. Human angiotensin-converting enzyme 2 (ACE2) is a membrane-bound carboxypeptidase that forms a dimer and serves as the cellular receptor for SARS‑CoV‑2. ACE2 is also a key negative regulator of the renin-angiotensin system (RAS) that modulates vascular functions. We report here the properties of a trimeric ACE2 ectodomain variant, engineered using a structure-based approach. The trimeric ACE2 variant has a binding affinity of ~60 pM for the spike (S) protein of SARS‑CoV‑2 (compared to 77 nM for monomeric ACE2 and 12–22 nM for dimeric ACE2 constructs), while preserving its peptidase activity and the ability to block activation of angiotensin II receptor type 1 in the RAS. Moreover, the engineered ACE2 potently inhibits infection of SARS‑CoV‑2 in cell culture. These results suggest that engineered, trimeric ACE2 may be a promising anti-SARS-CoV-2 agent for treating COVID-19.

Discovery of a novel lactate dehydrogenase tetramerization domain using epitope mapping and peptides

Despite being initially regarded as a metabolic waste product, lactate is now considered to serve as a primary fuel for the tricarboxylic acid cycle in cancer cells. At the core of lactate metabolism, lactate dehydrogenases (LDHs) catalyze the interconversion of lactate to pyruvate and as such represent promising targets in cancer therapy. However, direct inhibition of the LDH active site is challenging from physicochemical and selectivity standpoints. However, LDHs are obligate tetramers. Thus, targeting the LDH tetrameric interface has emerged as an appealing strategy. In this work, we examine a dimeric construct of truncated human LDH to search for new druggable sites. We report the identification and characterization of a new cluster of interactions in the LDH tetrameric interface. Using nanoscale differential scanning fluorimetry, chemical denaturation, and mass photometry, we identified several residues (E62, D65, L71, and F72) essential for LDH tetrameric stability. Moreover, we report a family of peptide ligands based on this cluster of interactions. We next demonstrated these ligands to destabilize tetrameric LDHs through binding to this new tetrameric interface using nanoscale differential scanning fluorimetry, NMR water–ligand observed via gradient spectroscopy, and microscale thermophoresis. Altogether, this work provides new insights on the LDH tetrameric interface as well as valuable pharmacological tools for the development of LDH tetramer disruptors.

Increasing thermal stability and improving biodistribution of VEGFR2-binding affibody molecules by a combination of in silico and directed evolution approaches

The family of vascular endothelial growth factor (VEGF) ligands and their interactions with VEGF receptors (VEGFRs) play important roles in both pathological and physiological angiogenesis. Hence, agonistic and antagonistic ligands targeting this signaling pathway have potential for both studies on fundamental biology and for development of therapies and diagnostics. Here, we engineer VEGFR2-binding affibody molecules for increased thermostability, refolding and improved biodistribution. We designed libraries based on the original monomeric binders with the intention of reducing hydrophobicity, while retaining high affinity for VEGFR2. Libraries were displayed on bacteria and binders were isolated by fluorescence-activated cell sorting (FACS). In parallel, we used an automated sequence- and structure-based in silico algorithm to identify potentially stabilizing mutations. Monomeric variants isolated from the screening and the in silico approach, respectively, were characterized by circular dichroism spectroscopy and biosensor assays. The most promising mutations were combined into new monomeric constructs which were finally fused into a dimeric construct, resulting in a 15 °C increase in melting temperature, complete refolding capability after heat-induced denaturation, retained low picomolar affinity and improved biodistribution profile in an in vivo mouse model. These VEGFR2-binding affibody molecules show promise as candidates for further in vivo studies to assess their suitability as molecular imaging and therapeutic agents.

Heterologous expression of concatenated nicotinic ACh receptors: Pros and cons of subunit concatenation and recommendations for construct designs.

Concatenation of Cys-loop receptor subunits is a commonly used technique to ensure experimental control of receptor assembly. However, we recently demonstrated that widely used constructs did not lead to the expression of uniform pools of ternary and more complex receptors. The aim was therefore to identify viable strategies for designing concatenated constructs that would allow strict control of resultant receptor pools. Concatenated dimeric, tetrameric, and pentameric α4β2-containing nicotinic ACh (nACh) receptor constructs were designed with successively shorter linker lengths and expressed in Xenopus laevis oocytes. Resulting receptor stoichiometries were investigated by functional analysis in two-electrode voltage-clamp experiments. Molecular dynamics simulations were performed to investigate potential effects of linkers on the 3D structure of concatemers. Dimeric constructs were found to be unreliable and should be avoided for expression of ternary receptors. By introducing two short linkers, we obtained efficient expression of uniform receptor pools with tetrameric and pentameric constructs. However, linkers should not be excessively short as that introduces strain on the 3D structure of concatemers. The data demonstrate that design of concatenated Cys-loop receptors requires a compromise between the desire for control of assembly and avoiding introduction of strain on the resulting protein. The overall best strategy was found to be pentameric constructs with carefully optimised linker lengths. Our findings will advance studies of ternary or more complex Cys-loop receptors as well as enabling detailed analysis of how pharmacological agents interact with stoichiometry-specific binding sites.

Lipid-tagged single domain antibodies for improved enzyme-linked immunosorbent assays

Anti-Staphylococcal Enterotoxin B single domain antibodies were engineered to include the N-terminal peptide sequence of the major outer membrane lipoprotein from Escherichia coli, which directs the N-terminal addition of lipid to the single domain antibody. We produced and purified two different single domain antibodies as well as a variant and dimer construct of one of the two, all with and without the added lipid. Their ability to function as the capture antibody in standard enzyme-linked immunosorbent assays were evaluated, finding that coating polystyrene microtiter plates with the lipid-tagged single domain antibodies gave a 3-fold improvement in the observed limit of detection. This increase was likely due to an increased amount of single domain antibody adsorbed to the microtiter plate, which translated to improved limits of detection of Staphylococcal Enterotoxin B over using the same single domain antibody sans lipid-tag. However, improved orientation may also play a role. Regardless of the mechanism, the biosynthetic lipid-tagging of single domain antibodies represent a facile modality that can enhance their ability to be utilized as immunoassay capture reagent as well as facilitate their incorporation into liposome targeting applications in the future.

Tuning the Polymorphism of the Anti-VEGF G-rich V7t1 Aptamer by Covalent Dimeric Constructs.

In the optimization process of nucleic acid aptamers, increased affinity and/or activity are generally searched by exploring structural analogues of the lead compound. In many cases, promising results have been obtained by dimerization of the starting aptamer. Here we studied a focused set of covalent dimers of the G-quadruplex (G4) forming anti-Vascular Endothelial Growth Factor (VEGF) V7t1 aptamer with the aim of identifying derivatives with improved properties. In the design of these covalent dimers, connecting linkers of different chemical nature, maintaining the same polarity along the strand or inverting it, have been introduced. These dimeric aptamers have been investigated using several biophysical techniques to disclose the conformational behavior, molecularity and thermal stability of the structures formed in different buffers. This in-depth biophysical characterization revealed the formation of stable G4 structures, however in some cases accompanied by alternative tridimensional arrangements. When tested for their VEGF165 binding and antiproliferative activity in comparison with V7t1, these covalent dimers showed slightly lower binding ability to the target protein but similar if not slightly higher antiproliferative activity on human breast adenocarcinoma MCF-7 cells. These results provide useful information for the design of improved dimeric aptamers based on further optimization of the linker joining the two consecutive V7t1 sequences.

DNA scaffold supports long-lived vibronic coherence in an indodicarbocyanine (Cy5) dimer.

Vibronic coupling between pigment molecules is believed to prolong coherences in photosynthetic pigment–protein complexes. Reproducing long-lived coherences using vibronically coupled chromophores in synthetic DNA constructs presents a biomimetic route to efficient artificial light harvesting. Here, we present two-dimensional (2D) electronic spectra of one monomeric Cy5 construct and two dimeric Cy5 constructs (0 bp and 1 bp between dyes) on a DNA scaffold and perform beating frequency analysis to interpret observed coherences. Power spectra of quantum beating signals of the dimers reveal high frequency oscillations that correspond to coherences between vibronic exciton states. Beating frequency maps confirm that these oscillations, 1270 cm−1 and 1545 cm−1 for the 0-bp dimer and 1100 cm−1 for the 1-bp dimer, are coherences between vibronic exciton states and that these coherences persist for ∼300 fs. Our observations are well described by a vibronic exciton model, which predicts the excitonic coupling strength in the dimers and the resulting molecular exciton states. The energy spacing between those states closely corresponds to the observed beat frequencies. MD simulations indicate that the dyes in our constructs lie largely internal to the DNA base stacking region, similar to the native design of biological light harvesting complexes. Observed coherences persist on the timescale of photosynthetic energy transfer yielding further parallels to observed biological coherences, establishing DNA as an attractive scaffold for synthetic light harvesting applications.

A3B and ABAB aminophthalocyanines: Building blocks for dimeric and polymeric constructs

Mono or diamino phthalocyanines with A3B or crosswise ABAB substitution patterns have been synthesized and used as building blocks for the preparation of dimeric and polymeric phthalocyanines. For this, 4,5-di(dodecylsulfanyl) phthalonitrile was converted into 1,3-diimino-6,7-di-([Formula: see text]-dodecylsulfanyl)-isoiminoindoline and then reacted with 6-nitro-1,3,3-trichloroisoindoline. The nitro functions on the resulting inseparable mixture of A3B and ABAB phthalocyanines were reduced into amines by Na2S and the phthalocyanines could be chromatographically separated. Dimeric phthalocyanine was synthesized by the reaction of the mono-amino AB3 with sebacoyldichloride, and a poorly soluble linear polymeric material was obtained by reaction of the ABAB di-amino phthalocyanine with sebacoyl dichloride.

Nonlinear waves in an anti-Hermitian lattice with cubic nonlinearity

In an anti-Hermitian linear system, all energy eigenvalues are purely imaginary and the corresponding eigenvectors are orthogonal. This implies that no stationary state is available in such systems. We consider an anti-Hermitian lattice with cubic nonlinearity and explore novel nonlinear stationary modes. We discuss that relative population is conserved in a nonreciprocal tight binding lattice with periodical boundary conditions as opposed to parity-time (PT) symmetric lattices. We study nonlinear nonrecipocal dimer, triple and quadrimer models and construct stationary nonlinear modes.

Trimerization of dopamine transporter triggered by AIM-100 binding: Molecular mechanism and effect of mutations

Recent work demonstrated the propensity of dopamine transporters (DATs) to form trimers or higher oligomers, enhanced upon binding a furopyrimidine, AIM-100. AIM-100 binding promotes DAT endocytosis and thereby moderates dopaminergic transmission. Despite the neurobiological significance of these events, the molecular mechanisms that underlie the stabilization of DAT trimer and the key interactions that modulate the trimerization of DAT, and not serotonin transporter SERT, remain unclear. In the present study, we determined three structural models, termed trimer-W238, -C306 and -Y303, for possible trimerization of DATs . To this aim, we used structural data resolved for DAT and its structural homologs that share the LeuT fold, advanced computational modeling and simulations, site-directed mutagenesis experiments and live-cell imaging assays. The models are in accord with the versatility of LeuT fold to stabilize dimeric or higher order constructs. Selected residues show a high propensity to occupy interfacial regions. Among them, D231-W238 in the extracellular loop EL2, including the intersubunit salt-bridge forming pair D231/D232-R237 (not present in SERT) (in trimer-W238), the loop EL3 (trimers-C306 and -Y303), and W497 on the intracellularly exposed IL5 loop (trimer-C306) and its spatial neighbors (e.g. K525) near the C-terminus are computationally predicted and experimentally confirmed to play important roles in enabling the correct folding and/or oligomerization of DATs in the presence of AIM-100. The study suggests the possibility of controlling the effective transport of dopamine by altering the oligomerization state of DAT upon small molecule binding, as a possible intervention strategy to modulate dopaminergic signaling.This article is part of the issue entitled ‘Special Issue on Neurotransmitter Transporters’.

Concatenated γ-aminobutyric acid type A receptors revisited: Finding order in chaos.

γ-aminobutyric acid type A receptors (GABAARs), the major inhibitory neurotransmitter receptors in the mammalian central nervous system, are arguably the most challenging member of the pentameric Cys-loop receptors to study due to their heteromeric structure. When two or more subunits are expressed together in heterologous systems, receptors of variable subunit type, ratio, and orientation can form, precluding accurate interpretation of data from functional studies. Subunit concatenation is a technique that involves the linking of individual subunits and in theory allows the precise control of the uniformity of expressed receptors. In reality, the resulting concatemers from widely used constructs are flexible in their orientation and may therefore assemble with themselves or free GABAAR subunits in unexpected ways. In this study, we examine functional responses of receptors from existing concatenated constructs and describe refinements necessary to allow expression of uniform receptor populations. We find that dimers from two commonly used concatenated constructs, β-23-α and α-10-β, assemble readily in both the clockwise and the counterclockwise orientations when coexpressed with free subunits. Furthermore, we show that concatemers formed from new tetrameric α-10-β-α-β and α-10-β-α-γ constructs also assemble in both orientations with free subunits to give canonical αβγ receptors. To restrict linker flexibility, we systematically shorten linker lengths of dimeric and pentameric constructs and find optimized constructs that direct the assembly of GABAARs only in one orientation, thus eliminating the ambiguity associated with previously described concatemers. Based on our data, we revisit some noncanonical GABAAR configurations proposed in recent years and explain how the use of some concatenated constructs may have led to wrong conclusions. Our results help clarify current contradictions in the literature regarding GABAAR subunit stoichiometry and arrangement. The lessons learned from this study may guide future efforts in understanding other related heteromeric receptors.

Ni/Co-Catalyzed Homo-Coupling of Alkyl Tosylates.

A direct reductive homo-coupling of alkyl tosylates has been developed by employing a combination of nickel and nucleophilic cobalt catalysts. A single-electron-transfer-type oxidative addition is a pivotal process in the well-established nickel-catalyzed coupling of alkyl halides. However, the method cannot be applied to the homo-coupling of ubiquitous alkyl tosylates due to the high-lying σ*(C–O) orbital of the tosylates. This paper describes a Ni/Co-catalyzed protocol for the activation of alkyl tosylates on the construction of alkyl dimers under mild conditions.

Engineering the PP7 Virus Capsid as a Peptide Display Platform.

As self-assembling polyvalent nanoscale structures that can tolerate substantial genetic and chemical modification, virus-like particles are useful in a variety of fields. Here we describe the genetic modification and structural characterization of the Leviviridae PP7 capsid protein as a platform for the presentation of functional polypeptides. This particle was shown to tolerate the display of sequences from 1 kDa (a cell penetrating peptide) to 14 kDa (the Fc-binding double Z-domain) on its exterior surface as C-terminal genetic fusions to the coat protein. In addition, a dimeric construct allowed the presentation of exogenous loops between capsid monomers and the simultaneous presentation of two different peptides at different positions on the icosahedral structure. The PP7 particle is thereby significantly more tolerant of these types of polypeptide additions than Qβ and MS2, the other Leviviridae-derived VLPs in common use.

A quaternary tetramer assembly inhibits the deubiquitinating activity of USP25

USP25 deubiquitinating enzyme is a key member of the ubiquitin system, which acts as a positive regulator of the Wnt/β-catenin signaling by promoting the deubiquitination and stabilization of tankyrases. USP25 is characterized by the presence of a long insertion in the middle of the conserved catalytic domain. The crystal structure of USP25 displays an unexpected homotetrameric quaternary assembly that is directly involved in the inhibition of its enzymatic activity. The tetramer is assembled by the association of two dimers and includes contacts between the coiled-coil insertion domain and the ubiquitin-binding pocket at the catalytic domain, revealing a distinctive autoinhibitory mechanism. Biochemical and kinetic assays with dimer, tetramer and truncation constructs of USP25 support this mechanism, displaying higher catalytic activity in the dimer assembly. Moreover, the high stabilization of tankyrases in cultured cells by ectopic expression of a constitutive dimer of USP25 supports a biological relevance of this tetramerization/inhibition mechanism.