Tissue Dimensions Research Articles

Digital assessment of soft and hard tissue alterations after anterior maxillary tooth extraction

Objectives: This study aimed to assess dimensional alterations in soft and hard tissues 12 weeks post-extraction using novel computerized methods. Secondary objectives included exploring potential correlations between soft tissue changes and underlying bone variations, as well as investigating relationships between soft and hard tissue alterations and various contributing factors. Methods: For all patients, preoperative and postoperative CBCT scans and intra-oral scans were obtained. Soft and hard tissue dimensions before extraction and at 12 weeks post-extraction were measured using 3D-slicer software. Both DICOM and STL files were superimposed, and measurements were taken at 2mm and 4mm from the facial crestal level. Results: At twelve weeks, soft tissue thickness increased by 73.5% at 2mm and 51.2% at 4mm from the facial crestal bone. In contrast, there was a 42.5% and 33% bone resorption at 2mm and 4mm, respectively. Furthermore, the study found that smokers had a higher rate of soft tissue thickening and hard tissue resorption compared to non-smokers. The female group exhibited greater soft tissue thickening and bone resorption than the male group. Finally, the central incisor showed the highest bone loss rate, followed by the canine and the lateral incisor. Conclusions: Three months following tooth extraction, a physiological thickening of the facial soft tissue occurs concurrently with significant bone loss beneath it. Clinical Significance: This article’s novel digital assessment methods for evaluating soft and hard tissue alterations offer the potential to optimize treatment planning, enhancing patient outcomes and minimizing complications. By providing a comprehensive understanding of post-extraction tissue changes, it empowers clinicians to tailor treatments for individual patients, improving predictability and personalized care.

Clinical Observations of Soft Tissue Dimensions Around Teeth and Implants After Free Gingival Graft

Introduction and aimsThe histological and morphological differences in soft tissue between natural teeth and peri-implant may result in different clinical effectiveness to free gingival graft (FGG). This research aims to investigate the different efficacy of FGG in augmenting keratinized tissue width (KTW) between tooth and implant sites while evaluating its medium-term stability over a 2- to 5-year follow-up. MethodsIn this study, 29 patients underwent FGG to address insufficient clinical scenarios when KTW <2 mm at the buccal aspect, including 37 implant sites and 33 natural teeth sites both in posterior regions were included. The KTW and gingival margin position (GMP) of these sites was assessed by measuring the intra-oral photographs which were taken at 0 days (T0), 3-month (T1), 6-month (T2), 12-month post-surgery (T3), and 2 to 5 years follow-up (T4). ResultsThe results revealed that KTW increased significantly in both groups. However, the natural teeth group showed significantly less graft shrinkage (GS) than the implants group. (Teeth: 2.05 ± 0.51 mm and 25.42% ± 6.45%; Implants: 3.18 ± 0.65 mm and 38.92% ± 5.39%, P <.01). From T1 to T4. The gingival margin coronally advanced by 0.47 ± 0.51 mm and 0.18 ± 0.43 mm for the natural teeth and implants group, respectively (P<.05). ConclusionsA greater KTW reduction after FGG was observed at implants versus natural teeth. And, the graft surrounding implants after crown restoration was stable for up to 2 to 5 years. Clinical relevanceBy comparing the changes in KTW around natural teeth and implants following FGG to investigate whether there are differences between them and the degree of differences. Additionally, this allows us to explore whether the restorations impact the effect of FGG. This research can assist clinicians in selecting an appropriate amount of soft tissue during surgery to achieve treatment goals, reduce postoperative discomfort for patients, and enhance predictability in clinicians' ability to increase keratinized tissue. Furthermore, by observing changes in the position of GMP around natural teeth and implants, the effectiveness of FGG in root coverage can be understood, thus improving the predictability of FGG for root coverage.

Changes in soft tissue dimensions following horizontal guided bone regeneration with a split-thickness flap design – evaluation of 8 cases with a digital method

BackgroundPeri-implant soft tissue corrections are often indicated following alveolar ridge augmentation, due to the distortion of the keratinized mucosa at the area of augmentation. The objective of the current study was to evaluate the dimensional soft tissue changes following horizontal guided bone regeneration (GBR) utilizing 3D digital data.Methods8 mandibular surgical sites with horizontal alveolar ridge deficiencies were treated utilizing a resorbable collagen membrane and a split-thickness flap design. Baseline and 6-month follow-up cone-beam computed tomography (CBCT) scans were reconstructed as 3D virtual models and were superimposed with the corresponding intraoral scan. Linear changes of supracrestal vertical- horizontal soft tissue alterations were measured in relation to the alveolar crest at the mesial- middle- and distal aspect of the surgical area. Soft tissue dimensions were measured at baseline and at 6-month follow-up.ResultsPreoperative supracrestal soft tissue height measured midcrestally averaged at 2.37 mm ± 0.68 mm, 2.37 mm ± 0.71 mm and 2.64 mm ± 0.87 mm at the mesial-, middle- and distal planes. Whereas postoperative supracrestal soft tissue height was measured at 2.62 mm ± 0.72 mm, 2.67 mm ± 0.67 mm and 3.69 mm ± 1.02 mm at the mesial, middle and distal planes, respectively. Supracrestal soft tissue width changed from 2.14 mm ± 0.72 mm to 2.47 mm ± 0.46 mm at the mesial, from 1.72 mm ± 0.44 mm to 2.07 mm ± 0.67 mm and from 2.15 mm ± 0.36 mm to 2.36 mm ± 0.59 mm at the mesial, middle and distal planes, respectively. Additionally the buccal horizontal displacement of supracrestal soft tissues could be observed.ConclusionsThe current study did not report significant supracrestal soft tissue reduction following horizontal GBR with a split-thickness flap. Even though there was a slight increase in both vertical and horizontal dimensions, differences are clinically negligible.Trail registrationThe trail was approved by the U.S. National Library of Medicine (www.clinicaltrials.gov); trial registration number: NCT05538715; registration date: 09/09/2022.

Vascular tissues bioprinted with smooth muscle cell-only bioinks in support baths mimic features of native coronary arteries

This study explores the bioprinting of a smooth muscle cell-only bioink into ionically crosslinked oxidized methacrylated alginate (OMA) microgel baths to create self-supporting vascular tissues. The impact of OMA microgel support bath methacrylation degree and cell-only bioink dispensing parameters on tissue formation, remodeling, structure and strength was investigated. We hypothesized that reducing dispensing tip diameter from 27 G (210μm) to 30 G (159μm) for cell-only bioink dispensing would reduce tissue wall thickness and improve the consistency of tissue dimensions while maintaining cell viability. Printing with 30 G tips resulted in decreased mean wall thickness (318.6μm) without compromising mean cell viability (94.8%). Histological analysis of cell-only smooth muscle tissues cultured for 14 d in OMA support baths exhibited decreased wall thickness using 30 G dispensing tips, which correlated with increased collagen deposition and alignment. In addition, a TUNEL assay indicated a decrease in cell death in tissues printed with thinner (30 G) dispensing tips. Mechanical testing demonstrated that tissues printed with a 30 G dispensing tip exhibit an increase in ultimate tensile strength compared to those printed with a 27 G dispensing tip. Overall, these findings highlight the importance of precise control over bioprinting parameters to generate mechanically robust tissues when using cell-only bioinks dispensed and cultured within hydrogel support baths. The ability to control print dimensions using cell-only bioinks may enable bioprinting of more complex soft tissue geometries to generatein vitrotissue models.

Local delivery of pamidronate with collagen matrix mitigates buccal bone resorption following immediate implant placement - An experimental invivo study.

The aim of this experimental invivo pilot study was to evaluate the effect of the local delivery of pamidronate within a collagen membrane on the changes in the buccal soft and hard tissue dimensions at the time of immediate implant placement and whether this effect was influenced by the placement of bone substitutes. In six beagle dogs, the distal roots of the third and fourth premolars were extracted, and immediate implants were placed. Treatment groups were randomly allocated to each socket: (i) covering the buccal bone with pamidronate-soaked collagen membrane (BP group), (ii) filling the gap defect with synthetic bone substitute (BS group), (iii) filling the gap defect with synthetic bone substitute and covering the buccal bone with pamidronate soaked collagen membrane (BP/BS group), (iv) no treatment (control group). Intraoral scanning was performed immediately after the surgery and at 20 weeks. Histomorphometric and micro-computed tomography (CT) outcomes were evaluated at 20 weeks. The micro CT analysis demonstrated that the BP group showed no apparent difference in vertical bone level with residual mesial root area, while control group showed significant buccal bone resorption at the implant site. The histomorphometric analysis demonstrated that the vertical bone level of buccal plate was significantly differed between the BP and control group (0.34 ± 0.93 and 1.27 ± 0.56 mm, respectively; p = .041). There was no statistically significant difference in the horizontal ridge width (HRW 1, 2, 3) among the groups. Also, the thickness, height and buccal contours of the soft tissue did not reveal significant changes among the groups. The local delivery of pamidronate to the outer surface of the buccal wall at the time of immediate implant placement effectively limits buccal bone resorption. The results from the present investigation should be interpreted with caution, as well as its clinical translatability. Further investigation is needed to understand the pamidronate binding and releasing kinetic, as well as the ideal carrier of this drug for its topical application.

Histological and immunohistochemical soft-tissue response to cylindrical and concave abutments: Multicenter randomized clinical trial.

This study aimed to analyze the influence of concave and cylindrical abutments on peri-implant soft tissue. Dimensions, collagen fiber orientation, and immunohistochemical data were assessed. A multicenter, split-mouth, double-blind randomized clinical trial was conducted. Two groups were analyzed: cylindrical abutments and concave abutments. After a 12-week healing period, peri-implant soft tissue samples were collected, processed, and evaluated for dimensions, collagen fiber orientation, and immunohistochemical data. Inflammatory infiltration and vascularization were assessed, and the abutment surfaces were analyzed using scanning electron microscopy. The statistical analysis was performed using the SPSS version 20.0 statistical package. A total of 74 samples in 37 patients were evaluated. Histological evaluation of peri-implant soft tissue dimensions revealed significant differences between concave and cylindrical abutments. Concave abutments exhibited greater total height (concave: 3.57±0.28 - cylindrical: 2.95±0.27) and barrier epithelium extension (concave: 2.46±0.17 - cylindrical: 1.89±0.21) (p<0.05), while the supracrestal connective tissue extension (concave: 1.11±0.17 - cylindrical: 1.03±0.16) was slightly greater (p>0.05). Collagen fiber orientation favored concave abutments (23.76±5.86), with significantly more transverse/perpendicular fibers than for cylindrical abutments (15.68±4.57). The immunohistochemical analysis evidenced greater inflammatory and vascular intensity in the lower portion for both abutments, though concave abutments showed lower overall intensity (concave: 1.05±0.78 - cylindrical: 1.97±0.68) (p<0.05). The abutment surface analysis demonstrated a higher percentage of tissue remnants on concave abutments (42.47±1.32; 45.12±3.03) (p<0.05). Within the limitations of this study, concave abutments presented significantly greater peri-implant tissue height, linked to an extended barrier epithelium, versus cylindrical abutments in thick tissue phenotype. This enhanced soft tissue sealing, favoring a greater percentage of transversely oriented collagen fibers. The concave design reduced chronic inflammatory exudation with T and B cells, thus minimizing the risk of chronic inflammation. This study looked at how 2 different shapes of dental implant abutments (the parts that connect the implant to the crown), specifically concave and cylindrical, affect the soft tissue around the implants. We wanted to see how these shapes influenced the tissue's size, structure, and health. We conducted a clinical trial with 37 patients, comparing the 2 types of abutments in the same mouth over 12weeks. Our findings showed that the concave abutments led to a taller and more extensive layer of protective tissue around the implant compared to the cylindrical ones. This protective tissue had more favorable collagen fiber orientation, which is important for the strength and health of the tissue. Additionally, the concave abutments resulted in less inflammation and better tissue integration. In conclusion, concave abutments may provide better support and health for the soft tissue around dental implants, reducing the risk of chronic inflammation and potentially leading to better long-term outcomes for patients with dental implants.

Use of High-Frequency Ultrasound for the Correlation of Epithelial Rete Peg Variation

ObjectiveRete pegs are projections of the oral epithelium into connective tissue. Their dimensions change during pathological conditions and may correlate with wound-healing status. Non-invasive, high-frequency ultrasound (US) may be able to capture these changes and aid in early detection of histopathological changes. The aim of this preclinical study is to correlate US images with histology and quantify epithelial layers at different tooth sites. MethodsSagittal B-mode images of mid-facial and interproximal oral soft tissue sites were recorded in a preclinical minipig model using a linear array in second harmonic mode (12/24 MHz). Histology samples from the same locations were stained (hematoxylin and eosin), digitized and registered with US images. Manual annotations were used to measure distances D1 (thickness of epithelium on histology vs. hyperechoic zone on US) and D2 (sum of epithelial thickness and length of rete pegs on histology vs. sum of hyperechoic and hypoechoic zone on US) to statistically analyze them. ResultsUltrasonic-derived dimensions yielded a mean bias of -0.64 (55% coefficient of variance [COV]: -180 to +180 µm) and -12 µm (39% COV: -260 to +240 µm) for D1 and D2, respectively. Individualized analysis of D1 and D2 by tooth type showed similar tends in the ability to differentiate between epithelium at different tooth locations, on both histology and US. ConclusionAssessing soft tissue dimensions on a sub-millimeter scale using clinical imaging hardware is still a developing area. Future research might open doors for diagnosis of oral pathologies and abnormal wound healing, and may limit false-positive indications for biopsies.

How conductivity boundaries influence the electric field induced by transcranial magnetic stimulation in in vitro experiments

Although transcranial magnetic stimulation (TMS) has become a valuable method for non-invasive brain stimulation, the cellular basis of TMS activation of neurons is still not fully understood. In vitro preparations have been used to understand the biophysical mechanisms of TMS, but in many cases these studies have encountered substantial difficulties in activating neurons. The hypothesis of this work is that conductivity boundaries can have large effects on the electric field in commonly used in vitro preparations. Our goal was to analyze the resulting difficulties in in vitro TMS using a simulation study, using a charge-based boundary element model. We decomposed the total electric field into the sum of the primary electric field, which only depends on coil geometry and current, and the secondary electric field arising from conductivity boundaries, which strongly depends on tissue and chamber geometry. We investigated the effect of the conductivity boundaries on the electric field strength for a variety of in vitro experimental settings to determine the sources of difficulty. We showed that conductivity boundaries can have large effects on the electric field in in vitro preparations. Depending on the geometry of the air-saline and the saline-tissue interfaces, the secondary electric field can significantly enhance, or attenuate the primary electric field, resulting in a much stronger or weaker total electric field inside the tissue; we showed this using a realistic preparation. Submerged chambers are generally much more efficient than interface chambers since the secondary field due to the thin film of saline covering the tissue in the interface chamber opposes the primary field and significantly reduces the total field in the tissue placed in the interface chamber. The relative dimensions of the chamber and the TMS coil critically determine the total field; the popular setup with a large coil and a small chamber is particularly sub-optimal because the secondary field due to the air-chamber boundary opposes the primary field, thereby attenuating the total field. The form factor (length vs width) of the tissue in the direction of the induced field can be important since a relatively narrow tissue enhances the total field at the saline-tissue boundary. Overall, we found that the total electric field in the tissue is higher in submerged chambers, higher if the chamber size is larger than the coil and if the shorter tissue dimension is in the direction of the electric field. Decomposing the total field into the primary and secondary fields is useful for designing in vitro experiments and interpreting the results.

A novel digital way to measure the vertical and horizontal dimensions of the supra-crestal peri-implant soft tissues.

To report on a novel digital superimposition workflow that enables measuring the supra-crestal peri-implant soft tissue dimensions all along implant treatment and afterwards. A preoperative CBCT and intra-oral scans (IOS) are successively taken before surgery, at the end of the healing period, at prosthesis delivery, and over time; they are digitally superposed on a dedicated software. Then, the stereolithography files (STL) of the healing abutment, of the prosthetic abutment and the crown are successively merged into the superposition set of IOSs. The workflow protocol of merging successively the STL of each item into the superposition set of IOSs enables capturing the dimensions of the height and width of the supra-crestal soft tissues, at every level of the healing abutment, the prosthetic abutment and the crown. In addition, it allows measuring the vertical distance that the crown exerts pressure on the gingiva and the thickness of the papillae at every level of the abutment. This novel digital superimposition workflow provides a straightforward method of measuring the vertical and horizontal dimensions of the supra-crestal peri-implant soft tissues, including the papillae, at each stage of the implant treatment process. It allows investigating a certain number of soft tissue variables that were previously inaccessible to clinical research. It should help enhancing our comprehension of the peri-implant soft tissue dynamics.

Prosthetic design and choice of components for maintenance of optimal peri-implant health: a comprehensive review.

Current research has identified features of the prosthetic design with potential to significantly impact the long-term health of peri-implant tissues, while the choice of prosthetic components is also shown to be critical in an effort to reduce long-term complications of implant therapy. Overcontouring of the prosthesis emergence profile has been associated with marginal bone loss, recession and peri-implantitis, while the mucosal emergence angle is shown to have a strong association with peri-implant tissue inflammation. Further elements of interest include convexity/concavity of the restoration, the prosthetic connection and the different geometric configurations of junctions, as well as the peri-implant tissue dimensions. With regards to implant components, the choice between original and third-party-manufactured components might come with implications, as differences in material and microgeometry might impact precision of fit and overall performance, potentially leading to complications. Scrutiny of the specifications and manufacturing is essential when third-party-manufactured components are considered.The aim of this narrative review was to summarise the current evidence with regards to the restorative features of the implant prosthesis and also the selection of prosthetic components which can have implications for the long-term success of the implant therapy. Furthermore, the review aimed at interpretating current scientific evidence into meaningful strategies and recommendations to implement in clinical practice of implant dentistry.

A Randomized Controlled Trial Comparing Collagen Matrix to Hemostatic Gelatin Sponge as Socket Seal in Alveolar Ridge Preservation.

(1) Objectives: This study aimed to compare a collagen matrix to a hemostatic gelatin sponge as a socket seal in alveolar ridge preservation (ARP). (2) Methods: Systemically healthy patients planned for ARP at two sites with more than 50% of the buccal bone wall remaining after tooth extraction were eligible for inclusion. ARP involved socket grafting using collagen-enriched deproteinized bovine bone mineral. Sites were then randomly assigned to the test group (collagen matrix) or the control group (hemostatic gelatin sponge). The primary outcome was soft tissue thickness in the center of the site at 4 months, analyzed on cone-beam computed tomography. Secondary outcomes included the buccal and lingual soft tissue heights, horizontal bone loss, buccal soft tissue profile changes, wound dimensions, and Socket Wound Healing Score (SWHS). (3) Results: In total, 18 patients (12 females, 6 males) with a mean age of 57.3 years (SD 11.1) were included. Four months after ARP, the soft tissue thickness in the center of the site amounted to 2.48 mm (SD 0.70) in the test group and 1.81 mm (SD 0.69) in the control group. The difference of 0.67 mm (95% CI: 0.20-1.14) in favor of the collagen matrix was statistically significant (p < 0.009). The buccal soft tissue height was also statistically significantly higher for the collagen matrix (0.72 mm; 95% CI: 0.06-1.38; p = 0.034). A trend favoring the collagen matrix was found for the lingual soft tissue height (p = 0.066). No significant differences between the groups in terms of horizontal bone loss, buccal soft tissue profile changes, wound dimensions, and the SWHS were found. (4) Conclusions: The absence of significant differences in hard tissue outcomes suggests that both the collagen matrix and hemostatic gelatin sponge effectively sealed the extraction socket and supported bone preservation. However, the collagen matrix better maintained soft tissue dimensions. The clinical relevance of this finding with respect to the necessity for adjunctive soft tissue augmentation at the time of implant placement is yet to be studied.

Association Between Soft Tissue Measures From Computed Tomography and Upper Airway Collapsibility on Drug-Induced Sleep Endoscopy.

Positive airway pressure (PAP) titration during drug-induced sleep endoscopy (DISE) provides objective measures of upper airway collapsibility. While skeletal measurements relate to collapsibility measures on DISE, the influence of soft tissue dimensions on upper airway collapsibility is not known. We analyzed the relationship of measures of upper airway soft tissue volumes, specifically soft palate, pharyngeal lateral walls, and tongue, with metrics of collapsibility. Cross-sectional analysis from a prospective cohort. Academic medical center. Patients seeking PAP alternative therapies for obstructive sleep apnea (OSA) underwent standardized supine computed tomography (CT) acquisition and DISE protocols. The CT analysis primarily focused on soft tissue volumes and, secondarily, on airway and skeletal volumetric measures. DISE with PAP administration (DISE-PAP) enabled the determination of the pressure at which inspiratory airflow first commenced (pharyngeal critical pressure, PcritA) and the pressure at which inspiratory flow limitation was abolished (pharyngeal opening pressure, PhOP). Both unadjusted and adjusted correlation analyses were performed to understand the relationship between upper airway anatomy and either PcritA or PhOP. One hundred thirty-nine subjects completed both CT and DISE-PAP. On average, patients were male (70.5%), white (84.2%), middle-aged (56.6 ± 13.5 years), and overweight (29.6 ± 4.7 kg/m2), with moderate-severe apnea-hypopnea index (29.7 ± 21.3 events/h). Adjusted for age, sex, body mass index, and skeletal volumes, soft palate, and lateral pharyngeal wall volumes were not associated with PhOP or PcritA, but a larger tongue was associated with more positive PhOP (⍴ = 0.20, P = .02), and more positive PcritA (⍴ = 0.16, P = .07). Exploratory analyses revealed smaller minimum cross-sectional retropalatal area and intramandibular volume were also associated with increased collapsibility measures. After controlling for clinical factors and skeletal volume, greater tongue volume was associated with more severe collapsibility during DISE. These results, in concert with previous work, suggest that greater tongue volume in a smaller skeletal dimensions contribute to the severity of airway collapsibility, a key driver of OSA pathogenesis.

Assessment of the correlation between supracrestal gingival tissue dimensions and other periodontal phenotypes components via the digital registration method: a cross‑sectional study in a Chinese population

BackgroundSupracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning.MethodsThis cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05.ResultsA total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC.ConclusionSGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated.Trial registrationThis study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

Alveolar Buccal Bone Overbuilding Before Tooth Extraction: A Preclinical Study.

To evaluate the dimensional changes in the alveolar crest after buccal overbuilding was performed prior to tooth extraction in a dog model. At the test sites, alveolar crest overbuilding was performed on the buccal aspect of the distal root of the third premolar using xenograft covered with a collagen membrane. No treatment was applied at the control sites. After 3 months, the distal roots of both third premolars were extracted and implants were immediately placed into the alveolus, allowing nonsubmerged healing. After 3 months, biopsy samples were collected. Upon histologic analysis, no statistically significant differences in hard tissue dimensions were found. The buccal bone plate at the test sites presented a tendency for higher resorption compared to the control sites. However, if the contribution of the residue of biomaterial is considered, a higher volumetric gain was registered at the test than at the control sites. The buccal overbuilding performed prior to tooth extraction did not contribute to the preservation of the alveolar crest dimensions after extraction. This could be due to failure to incorporate the graft into the newly formed bone.

Quantifying the relationship between bone and soft tissue measures within the rhesus macaques of Cayo Santiago.

Interpretations of the primate and human fossil record often rely on the estimation of somatic dimensions from bony measures. Both somatic and skeletal variation have been used to assess how primates respond to environmental change. However, it is unclear how well skeletal variation matches and predicts soft tissue. Here, we empirically test the relationship between tissues by comparing somatic and skeletal measures using paired measures of pre- and post-mortem rhesus macaques from Cayo Santiago, Puerto Rico. Somatic measurements were matched with skeletal dimensions from 105 rhesus macaque individuals to investigate paired signals of variation (i.e., coefficients of variation, sexual dimorphism) and bivariate codependence (reduced major axis regression) in measures of: (1) limb length; (2) joint breadth; and (3) limb circumference. Predictive models for the estimation of soft tissue dimensions from skeletons were built from Ordinary Least Squares regressions. Somatic and skeletal measurements showed statistically equivalent coefficients of variation and sexual dimorphism as well as high epiphyses-present ordinary least square (OLS) correlations in limb lengths (R2 >0.78, 0.82), joint breadths (R2 >0.74, 0.83) and, to a lesser extent, limb circumference (R2 >0.53, 0.68). Skeletal measurements are good substitutions for somatic values based on population signals of variation. OLS regressions indicate that skeletal correlates are highly predictive of somatic dimensions. The protocols and regression equations established here provide a basis for reliable reconstruction of somatic dimension from catarrhine fossils and validate our ability to compare or combine results of studies based on population data of either hard or soft tissue proxies.

Mechanistic insight into glioma through spatially multidimensional proteomics.

Characterizing the tumor microenvironment at the molecular level is essential for understanding the mechanisms of tumorigenesis and evolution. However, the specificity of the blood proteome in localized region of the tumor and its linkages with other systems is difficult to investigate. Here, we propose a spatially multidimensional comparative proteomics strategy using glioma as an example. The blood proteome signature of tumor microenvironment was specifically identified by in situ collection of arterial and venous blood from the glioma region of the brain for comparison with peripheral blood. Also, by integrating with different dimensions of tissue and peripheral blood proteomics, the information on the genesis, migration, and exchange of glioma-associated proteins was revealed, which provided a powerful method for tumor mechanism research and biomarker discovery. The study recruited multidimensional clinical cohorts, allowing the proteomic results to corroborate each other, reliably revealing biological processes specific to gliomas, and identifying highly accurate biomarkers.

Relationship between soft tissue dimensions and tomographic radial root position classification system for immediate implant installation.

The aim of this study was to evaluate the relationship between soft tissue dimensions and radial root position (RRP) classification for immediate implant placement on maxillary anterior teeth. Maxillary anterior teeth (n = 420) were analyzed in the radial plane of cone beam computed tomography (CBCT) scans. Each tooth was classified according to its RRP: class I, (IA, IB); class II (IIA, IIB) class III; class IV, and class V. Soft tissue thickness at different landmarks, supracrestal soft tissue height, and crestal bone thickness were measured in CBCT. Keratinized tissue width was clinically measured. Gingival phenotype (thick or thin) was evaluated by transparency of the periodontal probe and at the landmark 2mm from the gingival margin in CBCT. Class I tooth position accounted for 31.7%, class II for 45%, class III for 13.3%, class IV for 0.5%, and class V for 9.5%. The gingival phenotype was associated with RRP (χ2 test, p < 0.05). Soft tissue dimensions were significantly different over RRP classes (ANOVA and Tukey tests, p < 0.05). Types IA and IIA presented both thick soft and hard tissues. When planning immediate implants in the anterior maxilla, soft tissue dimensions evaluation should be incorporated into RRP classification to increase the accuracy and predictability of treatment outcomes.

Fractal penis and golden penis. The hidden dimensions of penile tissue

The penis is an organ with a unique and complex structure. It is formed by a fractal architecture, meaning its design is based on highly complex repetitive patterns. In addition, its dimensions follow what are known as "golden proportions", also known as "the divine proportion". These proportions are a mathematical relationship that is found in many natural structures and, in the case of the penis, provide stability and improve its performance. This design is not the result of chance, but rather the result of an underlying mathematical message. Fractal geometry, based on complex numbers, is a key tool in understanding the internal structure of the penis, which cannot be described using traditional Euclidean geometry. In addition to fractal geometry, the presence of golden proportions in the penis suggests that its design is influenced by mathematics. To fully understand this relationship, additional studies are required and the creation of innovative mathematical models that include tools such as artificial intelligence. In conclusion, the penis is an example of how mathematics and nature are closely related and how mathematical complexity can improve the functioning of natural structures.

Relationship of tissue dimensions and three captive bolt application sites on cadaver heads from mature swine (Sus scrofa domesticus)

Penetrating captive bolt (PCB) is a common method of euthanasia for swine but has not been evaluated for mature swine < 200kg body weight (BW). The objectives were to determine tissue depth, brain contact plane, and visible brain tissue damage (brain damage[BD]) for the common FRONTAL (F) and alternative TEMPORAL (T) and BEHIND EAR (BE) placements for PCB use on sows and boars weighing < 200kg. Cadaver heads were obtained from 30 sows and 30 boars (estimated BW, mean ± SD; sows: 165.8 ± 22.4kg; boars: 173.6 ± 21.4kg) from a slaughter establishment after electrical stunning and exsanguination. Heads were cooled at 2 to 4 °C for approximately 64h. A Jarvis PAS-Type P 0.25R PCB with a Long Stunning Rod Nosepiece Assembly and a 3.5 GR power load was used for all PCB applications at the following placements: F-3.5cm superior to the optic orbits at midline, T-at the depression posterior to the lateral canthus of the eye within the plane between the lateral canthus and the base of the ear, or BE-directly caudal to the pinna of the ear on the same plane as the eyes and targeting the middle of the opposite eye. For sows, the bolt path was in the brain for 10/10 (100.0%, 95% CI: 69.2% to 100.0%) F, T, and BE heads. In heads that could reliably be assessed for BD, BD was detected in 10/10 (100.0%, 95% CI: 69.2% to 100.0%) F heads, 9/9 (100.0%, 95% CI: 66.4% to 100.0%) T heads, and 0/10 (0.0%, 95% CI: 0.0% to 30.1%) BE heads. For boars, the bolt path was in the plane of the brain for 8/9 (88.9%, 95% CI: 51.8% to 99.7%) F heads, 9/10 (90.0%, 95% CI: 55.5% to 99.7%) T heads, and 11/11 (100.0%, 95% CI: 71.5% to 100.0%) BE heads. In heads that could reliably be assessed for BD, BD was detected in 8/9 (88.9%, 95% CI: 51.7% to 99.7%) F heads, 7/10 (70.0%, 95% CI: 34.8% to 93.3%) T heads, and 4/11 (36.4%, 95% CI: 10.9% to 69.2%) BE heads. Tissue depth was reported as mean ± SE followed by 95% one-sided upper reference limit (URL). For sows, total tissue thickness differed (P < 0.05) between placements (F: 49.41 ± 2.74mm, URL: 70.0mm; T: 62.83 ± 1.83mm, URL: 76.6mm; BE: 84.63 ± 3.67mm; URL: 112.3mm). Total tissue thickness differed (P < 0.05) between placements for boars (F: 54.73 ± 3.23mm, URL: 77.6mm; T: 70.72 ± 3.60mm, URL: 96.3mm; BE: 92.81 ± 5.50mm; URL: 135.3mm). For swine between 120 and 200kg BW, the F placement may have the greatest likelihood for successful euthanasia due to the least total tissue thickness and may present less risk for failure than the T and BE placements.

Staged esthetic crown lengthening: Classification and guidelines for periodontal-restorative therapy.

This article presents technical guidelines for perio-restorative esthetic crown lengthening, along with a discussion of the biologic rationale. A classification system is proposed to assist in treatment planning and sequencing the surgical and restorative phases. When esthetic crown lengthening is performed as an adjunct to restorative therapy, the surgical approach must be determined by the anticipated position of the restorative margins. The removal of sufficient bone to achieve the desired clinical crown length and preserve the supracrestal gingival tissue dimensions is facilitated by the use of a surgical guide fabricated according to the design of the restorations. A staged approach allows sequencing the provisional restoration to minimize unesthetic sequelae during the healing period. Inadequate bone resection and/or alteration of the soft tissue dimensions results in delayed healing, leading to coronal gingival rebound and biologic width impingement. The identification and preservation of appropriate restorative and biologic landmarks is essential for success in pre-prosthetic esthetic crown lengthening treatment. A staged approach improves the esthetic management during the postsurgical healing and maturation period. A restorative driven classification system for sequencing and staging adjunctive esthetic crown lengthening procedures is presented. Technical guidelines to enhance gingival margin predictability are suggested, accompanied by relevant evidence. In addition, wound healing timelines following gingival and osseous resection are provided.