Diisocyanide Ligands Research Articles

Pyrene-Decoration of a Chromium(0) Tris(diisocyanide) Enhances Excited State Delocalization: A Strategy to Improve the Photoluminescence of 3d6 Metal Complexes.

There is a long-standing interest in iron(II) complexes that emit from metal-to-ligand charge transfer (MLCT) excited states, analogous to ruthenium(II) polypyridines. The 3d6 electrons of iron(II) are exposed to a relatively weak ligand field, rendering nonradiative relaxation of MLCT states via metal-centered excited states undesirably efficient. For isoelectronic chromium(0), chelating diisocyanide ligands recently provided access to very weak MLCT emission in solution at room temperature. Here, we present a concept that boosts the luminescence quantum yield of a chromium(0) isocyanide complex by nearly 2 orders of magnitude, accompanied by a significant increase of the MLCT lifetime. Pyrene units in the diisocyanide ligand backbone lead to an enlarged π-conjugation system and to a strongly delocalized MLCT state, from which nonradiative relaxation is less dominant despite a sizable redshift of the emission. While the pyrene moiety is electronically coupled to the core of the chromium(0) complex in the excited state, UV-vis absorption and 2D NMR spectroscopy show that this is not the case in the ground state. Luminescence lifetimes and quantum yields for our pyrenyl-decorated chromium(0) complex exhibit an unusual bell-shaped dependence on solvent polarity, indicative of two counteracting effects governing the MLCT deactivation. These two effects are identified as predominant deactivation either through an energetically nearby lying metal-centered state in the most apolar solvents, or alternatively via direct nonradiative relaxation to the ground state following the energy gap law in more polar solvents. This is the first example of a 3d6 MLCT emitter to benefit from an increased π-conjugation network.

Coordination-Driven Self-Assembly of Cyclometalated Iridium Squares Using Linear Aromatic Diisocyanides.

Here, we demonstrate facile [4 + 4] coordination-driven self-assembly of cyclometalated iridium(III) using linear aryldiisocyanide bridging ligands (BLs). A family of nine new [Ir(C^N)2(μ-BL)]44+ coordination cages is described, where C^N is the cyclometalating ligand-2-phenylpyridine (ppy), 2-phenylbenzothiazole (bt), or 1-phenylisoquinoline (piq)-and BL is the diisocyanide BL, with varying spacer lengths between the isocyanide binding sites. These supramolecular coordination compounds are prepared via a one-pot synthesis, with isolated yields of 40-83%. 1H NMR spectroscopy confirms the selective isolation of a single product, which is affirmed to be the M4L4 square by high-resolution mass spectrometry. Detailed photophysical studies were carried out to reveal the nature of the luminescent triplet states in these complexes. In most cases, phosphorescence arises from the [Ir(C^N)2]+ nodes, with the emission color determined by the cyclometalating ligand. However, in two cases, the lowest-energy triplet state resides on the aromatic core of the BL, and weak phosphorescence from that state is observed. This work shows that aromatic diisocyanide ligands enable coordination-driven assembly of inert iridium(III) nodes under mild conditions, producing supramolecular coordination complexes with desirable photophysical properties.

A Photorobust Mo(0) Complex Mimicking [Os(2,2'-bipyridine)3]2+ and Its Application in Red-to-Blue Upconversion.

Osmium(II) polypyridines are a well-known class of complexes with luminescent metal-to-ligand charge-transfer (MLCT) excited states that are currently experiencing a revival due to their application potential in organic photoredox catalysis, triplet-triplet annihilation upconversion, and phototherapy. At the same time, there is increased interest in the development of photoactive complexes made from Earth-abundant rather than precious metals. Against this background, we present a homoleptic Mo(0) complex with a new diisocyanide ligand exhibiting different bite angles and a greater extent of π-conjugation than previously reported related chelates. This new design leads to deep red emission, which is unprecedented for homoleptic arylisocyanide complexes of group 6 metals. With a 3MLCT lifetime of 56 ns, an emission band maximum at 720 nm, and a photoluminescence quantum yield of 1.5% in deaerated toluene at room temperature, the photophysical properties are reminiscent of the prototypical [Os(2,2'-bipyridine)3]2+ complex. Under 635 nm irradiation with a cw-laser, the new Mo(0) complex sensitizes triplet-triplet annihilation upconversion of 9,10-diphenylanthracene (DPA), resulting in delayed blue fluorescence with an anti-Stokes shift of 0.93 eV. The photorobustness of the Mo(0) complex and the upconversion quantum yield are high enough to generate a flux of upconverted light that can serve as a sufficiently potent irradiation source for a blue-light-driven photoisomerization reaction. These findings are relevant in the greater contexts of designing new luminophores and photosensitizers for use in red-light-driven photocatalysis, photochemical upconversion, light-harvesting, and phototherapy.

Excited-State Relaxation in Luminescent Molybdenum(0) Complexes with Isocyanide Chelate Ligands

Diisocyanide ligands with a m-terphenyl backbone provide access to Mo0 complexes exhibiting the same type of metal-to-ligand charge transfer (MLCT) luminescence as the well-known class of isoelectronic RuII polypyridines. The luminescence quantum yields and lifetimes of the homoleptic tris(diisocyanide) Mo0 complexes depend strongly on whether methyl- or tert-butyl substituents are placed in α-position to the isocyanide groups. The bulkier tert-butyl substituents lead to a molecular structure in which the three individual diisocyanides ligated to one Mo0 center are interlocked more strongly into one another than the ligands with the sterically less demanding methyl substituents. This rigidification limits the distortion of the complex in the emissive excited-state, causing a decrease of the nonradiative relaxation rate by one order of magnitude. Compared to RuII polypyridines, the molecular distortions in the luminescent 3MLCT state relative to the electronic ground state seem to be smaller in the Mo0 complexes, presumably due to delocalization of the MLCT-excited electron over greater portions of the ligands. Temperature-dependent studies indicate that thermally activated nonradiative relaxation via metal-centered excited states is more significant in these homoleptic Mo0 tris(diisocyanide) complexes than in [Ru(2,2′-bipyridine)3]2+.

Strong Effect of Organic Ligands on the Electronic Structure of Metal-Chalcogenide Clusters.

It is shown that multiple ionization energies of metal-chalcogenide clusters can be substantially reduced by adding ligands that form charge transfer complexes. We demonstrate this intriguing phenomenon by considering metal-chalcogenide clusters including cases where a cluster has a filled electronic shell with a large gap between the occupied and unoccupied states reminiscent of stable species. The studies include a Co6Se8 core ligated with tri-ethylphosphine (PEt3) ligands forming a stable Co6Se8(PEt3)6 species. All of the ligated clusters have a first ionization energy in the range for alkali atoms and multiple ionization energies that are considerably lower than those for the non-ligated clusters. The change in electronic behavior upon ligation can be associated with a shift in the electronic spectrum via a crystal field like effect due to attaching ligands that form charge transfer complexes. We also show that metal-chalcogenide species can be programmed by proper ligand replacement to promote dimerization by first forming the Co6Se8(PEt3) n(CO)6- n ( n = 0-6) clusters where the CO ligands could be replaced by diisocyanide (CNC6H4NC) ligands. The diisocyanide ligand acts as a rigid linker between the metallic cores, enabling the formation of a Co6Se8(PEt3)5(CNC6H4NC)Co6Se8(PEt3)5 superatomic molecule (SM), and we examine the electronic and magnetic properties of the recently synthesized SM via studies on an analogous SM with smaller ligands.

Photophysics and Photoredox Catalysis of a Homoleptic Rhenium(I) Tris(diisocyanide) Complex.

Herein a homoleptic rhenium(I) complex bearing three chelating diisocyanide ligands and its photophysical properties are communicated. The complex emits weakly from a high-energy triplet metal-to-ligand charge-transfer excited state with an 8 ns lifetime in deaerated CH3CN at 22 °C and is shown to act as an efficient photoredox catalyst comparable to [Ir(ppy)3] (ppy = 2-phenylpyridine) in representative test reactions.

Ultrafast Wiggling and Jiggling: Ir2(1,8-diisocyanomenthane)42.

Binuclear complexes of d8 metals (PtII, IrI, RhI,) exhibit diverse photonic behavior, including dual emission from relatively long-lived singlet and triplet excited states, as well as photochemical energy, electron, and atom transfer. Time-resolved optical spectroscopic and X-ray studies have revealed the behavior of the dimetallic core, confirming that M-M bonding is strengthened upon dσ* → pσ excitation. We report the bridging ligand dynamics of Ir2(1,8-diisocyanomenthane)42+ (Ir(dimen)), investigated by fs-ns time-resolved IR spectroscopy (TRIR) in the region of C≡N stretching vibrations, ν(C≡N), 2000-2300 cm-1. The ν(C≡N) IR band of the singlet and triplet dσ*pσ excited states is shifted by -22 and -16 cm-1 relative to the ground state due to delocalization of the pσ LUMO over the bridging ligands. Ultrafast relaxation dynamics of the 1dσ*pσ state depend on the initially excited Franck-Condon molecular geometry, whereby the same relaxed singlet excited state is populated by two different pathways depending on the starting point at the excited-state potential energy surface. Exciting the long/eclipsed isomer triggers two-stage structural relaxation: 0.5 ps large-scale Ir-Ir contraction and 5 ps Ir-Ir contraction/intramolecular rotation. Exciting the short/twisted isomer induces a ∼5 ps bond shortening combined with vibrational cooling. Intersystem crossing (70 ps) follows, populating a 3dσ*pσ state that lives for hundreds of nanoseconds. During the first 2 ps, the ν(C≡N) IR bandwidth oscillates with the frequency of the ν(Ir-Ir) wave packet, ca. 80 cm-1, indicating that the dephasing time of the high-frequency (16 fs)-1 C≡N stretch responds to much slower (∼400 fs)-1 Ir-Ir coherent oscillations. We conclude that the bonding and dynamics of bridging di-isocyanide ligands are coupled to the dynamics of the metal-metal unit and that the coherent Ir-Ir motion induced by ultrafast excitation drives vibrational dephasing processes over the entire binuclear cation.

Luminescent complexes made from chelating isocyanide ligands and earth-abundant metals.

In this invited frontier article, recently discovered d6 and d10 complexes with long-lived metal-to-ligand charge transfer (MLCT) excited states are highlighted. Chelating diisocyanide ligands give access to emissive Mo(0) and Cr(0) complexes with d6 electron configuration exhibiting photophysical properties similar to those of Ru(ii) polypyridines or cyclometalated Ir(iii) complexes. With Ni(0), these ligands yield luminescent tetrahedral d10 complexes similar to isoelectronic Cu(i) bis(diimine) compounds.

Donor Strength Determination of Benzoxazolin-2-ylidene, Benzobisoxazolin-2-ylidene, and Their Isocyanide Precursors by 13C NMR Spectroscopy of Their PdII and AuI Complexes

A series of mono- and dinuclear palladium(II) and gold(I) complexes containing the iPr2-bimy reporter ligand and monodentate or Janus-type β-functionalized aryl (di)isocyanides have been prepared. Cyclization of the isocyanide ligands afforded complexes of monodentate or Janus-type N,O-heterocyclic carbenes (NOHCs) via a template-directed process. Using the iPr2-bimy 13Ccarbene signals in these complexes, the electron-donating ability of NOHCs and their isocyanide precursors could be evaluated and compared for the first time. Overall, NOHCs were found to be rather weakly donating carbenes. Spectroscopic comparison of mono- with dinuclear complexes indicated that electronic communication between two metal centers occurs only across the Janus-type diNOHC, but not for the diisocyanide ligand. Support for this claim was also found in the solid-state molecular structures, which revealed coplanarity of all ligands only in the diNOHC complex as a prerequisite for π-electron delocalization.

A chelating diisocyanide ligand for cyclometalated Ir(III) complexes with strong and tunable luminescence.

We report the synthesis, structural characterisation and detailed photophysical description of three cationic cyclometalated iridium(III) complexes (2-4) bearing a chelating diisocyanide as the ancillary ligand (1 = 2,2''-diisocyano-1,1':3',1''-terphenyl). All compounds display irreversible reduction and oxidation potentials and emit from a triplet excited state centred on the cyclometalating ligands with lifetimes of several dozen microseconds, as commonly observed for other iridium(III) isocyanide complexes and further confirmed by DFT calculations. Room-temperature photoluminescence can be tuned from blue to orange upon variation of the cyclometalating ligands, and the related quantum yields range from around 30% in acetonitrile solution to nearly 80% in solid-state, as for complex 3 embedded in a 1% w/w poly(methyl methacrylate) matrix.

High-density monolayers of metal complexes: preparation and catalysis.

Catalysts are one of the key materials for realizing a sustainable society. However, we may encounter problematic cases where conventional catalyst systems cannot provide effective solutions. We thus believe that the establishment of novel methods of catalyst preparation is currently necessary. Utilization of high-density monolayers of molecular metal complexes is our strategy, and we expect that this methodology will enable facile and systematic screening of unique and efficient catalysts. This Personal Account describes our challenges to establish such an immature method in catalyst preparation as well as the related background and perspective. Preparation and catalysis by high-density monolayers of Rh complexes with N-heterocyclic carbene, structurally compact phosphine and diisocyanide ligands on gold surfaces are presented. The catalytic application of a high-density Pd-bisoxazoline complex prepared on a single-crystal silicon surface is also shown. Uniquely high catalyst turnover numbers and high chemoselectivities were observed with these catalyst systems.

Platinum(II) Complexes with Novel Diisocyanide Ligands: Catalysts in Alkyne Hydroarylation

A series of novel diisocyanide ligands (o-CNC6H4O)2Y (diNC-1: Y = P(O)Ph; diNC-2: Y = o-C(O)C6H4C(O); diNC-3: Y = m-C(O)C6H4C(O); diNC-4: Y = C(O)C2H4C(O); diNC-5: Y = trans-C(O)C2H2C(O)) was successfully synthesized by reaction of lithium 2-isocyanophenate (generated in situ from benzoxazole and n-BuLi) and a diacylic or phosphonic dichloride. The corresponding platinum(II) complexes of general formula [PtX2(diNC)]1,2 (X = Cl, Me; diNC = diisocyanide ligand) were isolated by simple substitution of 1,5-cyclooctadiene in the starting [PtX2(COD)] complexes. The structure of the complexes, mononuclear or dinuclear, was confirmed by single-crystal X-ray analysis. A dinuclear complex of formula {(μ-diNC)[cis-PtCl2(PPh3)]2} could also be obtained with the diisocyanide ligand having a rigid fumaryl bridge and consequently the isocyanide moieties pointing in opposite directions. All the complexes were employed as catalysts in the hydroarylation of alkynes, showing generally good activity and selectivity toward th...

Poly[(μ2-2,2-dimethylpropane-1,3-diyl diisocyanide)-μ2-nitrato-silver(I)]: a powder study

In order to investigate the effect of counter-anions on the polymeric structure of (2,2-dimethylpropane-1,3-diyl diisocyanide)silver(I) complexes, the novel title polymeric compound, [Ag(NO(3))(C(7)H(10)N(2))](n), has been synthesized. The crystal structure was determined by simulated annealing from X-ray powder diffraction data collected at room temperature. The current structure is similar to the recently reported structure of the analogue with chloride replacing nitrate. This study illustrates that both the chloride and nitrate complexes crystallize in the orthorhombic system in the Pbca space group with one monomer in the asymmetric unit, and also gives a strong indication that the counter-anion does not have a considerable effect on the polymeric structure of the complex. The Ag centre lies in a distorted tetrahedral environment and is bonded to two 2,2-dimethylpropane-1,3-diyl diisocyanide ligands to form chains. The nitrate anions crosslink the Ag centres of the chains to form a two-dimensional polymeric network structure.

ChemInform Abstract: Structures and Properties of One‐Dimensional Transition Metal Containing Coordination/Organometallic Polymers and Oligomers Built Upon Assembling Diphosphine and Diisocyanide Ligands

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.

Chemical Stability and Characterization of Rhodium-Diisocyanide Coordination Polymers

Poly-[Rh(1,4-phenylene diisocyanide)+4/2(Cl)-] has a two-dimensional template structure, where Rh atoms are bonded by the -conjugated 1,4-phenylene diisocyanide (pdi) ligands in the x-y plane and through overlapping dz orbitals in the z direction. The more conductive metallic bonds in the z direction create anisotropy in the electrical conductivity. The anisotropy and unique geometry of poly-[Rh(pdi)+4/2(Cl)-] make it a useful test bed for examining the relationship between electrical properties and chemical stability in metal-isocyanide molecular wire systems. The bulk powder of poly-[Rh(pdi)+4/2(Cl)-] is estimated to have a room-temperature bulk conductivity of 3.4 x 10(-11) S x cm(-1), an electrical activation energy of 0.9 eV, and a dielectric constant of 7.5. In this paper, impedance spectroscopy and X-ray powder diffraction were used to show the dependence of the electrical conductivity on the metal-metal bonding of pressed bulk powders of poly-[Rh(pdi)+4/2(Cl)-]. Thermo-gravimetric analysis and X-ray photoelectron spectroscopy were used to demonstrate air sensitivity in the polymer and elucidate the mechanism of oxidative degradation.

Rhodium Dimers with 2,2-Dimethyl-1,3-diisocyano and Bis(diphenylphosphino)methane Bridging Ligands

Four rhodium dimers have been synthesized with a bridging diisocyanide ligand, dmb (2,2-dimethyl-1,3-diisocyanopropane): [Rh2(dmb)4](BPh4)2, [Rh2(dmb)4Cl2]Cl2, [Rh2(dmb)4I2](PF6)2, and [Rh2(dmb)2(dppm)2](BPh4)2 (dppm = bis(diphenylphosphino)methane). The complexes have been characterized by elemental analysis and mass spectrometry, as well as UV-visible, IR, and 1H NMR spectroscopies. X-ray crystal structures of the rhodium(I) complexes, [Rh2(dmb)4](BPh4)2 . 1.5CH3CN (3.2330(4), 3.2265(4) A) and [Rh2(dmb)2(dppm)2](BPh4)2.0.5CH3OH . 0.2H2O (3.0371(5) A), confirm the existence of short Rh...Rh interactions. The metal-metal separation for the rhodium(II) adduct, [Rh(2)(dmb)4Cl2]Cl2.6CHCl3 (2.8465(6) A), is consistent with a formal Rh-Rh bond. For the two luminescent rhodium(I) dimers and six previously investigated diisocyano-bridged dimers with and without dppm ligands, the intense spin-allowed dsigma-->psigma absorption band maximum shifts to longer wavelengths with decreasing Rh...Rh separation, and there is an approximate correlation between band energy and the inverse of the metal-metal separation cubed. Both [Rh2(dmb)4]2+ and [Rh2(dmb)4(dppm)2]2+ undergo oxidative addition in the presence of iodine. In the conversion of [Rh2(dmb)4]2+ to [Rh2(dmb)4I2]2+, the observed intermediate is tentatively assigned to a tetramer composed of two rhodium dimers. In the case of [Rh2(dmb)2(dppm)2]2+, no intermediate was detected.

Preparation and solid-state characterization of mixed-ligand coordination/organometallic oligomers and polymers of copper(I) and silver(I) using diphosphine and mono- and diisocyanide ligands.

The dimers [Cu(2)(dppm)(2)(CN-t-Bu)(3)](BF(4))(2) and [Ag(2)(dppm)(2)(CN-t-Bu)(2)](X)(2) (X(-) = BF(4)(-), ClO(4)(-)) and the coordination polymers [[M(diphos)(CN-t-Bu)(2)]BF(4)](n) (M = Cu, Ag; diphos = bis(diphenylphosphino)butane (dppb), bis(diphenylphosphino)pentane (dpppen), bis(diphenylphosphino)hexane (dpph)), [[Ag(2)(dppb)(3)(CN-t-Bu)(2)](BF(4))(2)](n), and [[Ag(dpppen)(CN-t-Bu)]BF(4)](n) have been synthesized and fully characterized as model materials for the mixed bridging ligand polymers which exhibit the general formula [[M(diphos)(dmb)]BF(4)](n) (M = Cu, Ag; dmb = 1,8-diisocyano-p-menthane) and [[Ag(dppm)(dmb)]ClO(4)](n). The identity of four polymers ([[Ag(dppb)(CN-t-Bu)(x)]BF(4)](n) (x = 1, 2), [[Ag(2)(dppb)(3)(CN-t-Bu)(2)](BF(4))(2)](n), [[Ag(dppm)(dmb)]ClO(4)](n)) and the two dimers has been confirmed by X-ray crystallography. The structure of [[Ag(dppm)(dmb)]ClO(4)](n) exhibits an unprecedented 1-D chain of the type "[Ag(dmb)(2)Ag(dppm)(2)(2+)](n)", where d(Ag(.)Ag) values between tetrahedral Ag atoms are 4.028(1) and 9.609(1) A for the dppm and dmb bridged units, respectively. The [[Ag(dppb)(CN-t-Bu)(x)]BF(4)](n) polymers (x = 1, 2) form zigzag chains in which the Ag atoms are tri- and tetracoordinated, respectively. The [[Ag(2)(dppb)(3)(CN-t-Bu)(2)](BF(4))(2)](n) polymer, which is produced from the rearrangement of [[Ag(dppb)(CN-t-Bu)(2)]BF(4)](n), forms a 2-D structure described as a "honeycomb" pattern, where large [Ag(dppb)(+)](6) macrocycles each hosting two counterions and two acetonitrile guest molecules are observed. Properties such as glass transition temperature, morphology, thermal decomposition, and luminescence in the solid state at 293 K are reported. The luminescence bands exhibit maxima between 475 and 500 nm with emission lifetimes ranging between 6 and 55 micros. These emissions are assigned to a metal-to-ligand charge transfer (MLCT) of the type M(I) --> pi(NC)/pi(PPh(2)).

Coordination/organometallic polymers based on diphosphine and diisocyanide ligands

AbstractThis paper reviews various coordination/ organometallic polymers in which the metal atoms are incorporated in the backbone using diphosphine and diisocyanide ligands. Such ligands includes diphosphines of the type bis(diphenylphosphino)alkane where alkane is (CH2)m with m = 1, 3‐6, bis(diphenylphosphino)acetylene (dpa), and bis(dimethylphosphino)methane (dmpm), and diisocyanides such as 1,8‐diiso‐cyano‐p‐menthane (dmb) and p‐diisocyanotetra‐methylbenzene (ditmb). The metal fragments are monocations such as Cu+, Ag+, and Au+, dinuclear species such as Pd2(dmb)22+, Pd2(dppm)22+, M2(dmpm)32+ (M = Cu, Ag), and clusters such as M4(dmb)42+ (M = Pd, Pt).

Angular Arenediethynyl Complexes of Gold(I)

Alkynylgold(I) complexes have been prepared from the angular bis(alkyne) MeC6H3-3,5-(CCH)2, in which the alkyne units are rigidly fixed at an angle of 120° to each other. Reaction with [AuCl(SMe2)] and base yields the shock-sensitive, insoluble compound [{MeC6H3-3,5-(CCAu)2}n] (2), which reacts with isocyanide, phosphine, or phosphite ligands (L) to give [MeC6H3-3,5-(CCAuL)2] (3; L = P(OPh)3, P(OMe)3, PPh3, PMePh2, t-BuNC, MeNC). The complexes with L = P(OMe)3, PMePh2 exist in the solid state as infinite one-dimensional ribbon structures in which neighboring molecules are associated through secondary gold−gold bonding. Complexes with diisocyanide ligands 1,4-C6R4(NC)2 (R = H, Me) have the formula [{MeC6H3-3,5-(CCAu)2(μ-LL)}n] and are insoluble in organic solvents; they are suggested to have a zigzag polymeric structure. In contrast, complexes with diphosphine ligands (CH2)n(PPh2)2 (n = 1−6) are soluble and are suggested to be the cyclic tetragold(I) complexes of formula [{MeC6H3-3,5-(CCAu)2(μ-LL)}2]; the ...

Mono and Dinuclear Tungsten Alkenyl-Carbyne Complexes Bridged by Cyanide and Diisocyanide Ligands: Synthesis, Electrochemical- and 183W-NMR Studies

Mono and Dinuclear Tungsten Alkenyl-Carbyne Complexes Bridged by Cyanide and Diisocyanide Ligands: Synthesis, Electrochemical- and 183W-NMR Studies