Diisocyanate Monomer Research Articles

Bio-sourced tartaric acid-derived tartarimides as diol counterparts towards renewable polyurethanes

The depletion of petroleum-based fossil resources and ever-increasing environmental problems are serious issues in the production of polymeric materials. An increasingly important approach is to obtain the building blocks used in the production of these materials from renewable sources of natural origin. In the present study, bio-sourced tartaric acid-based tartarimides were evaluated as monomeric diol compounds to synthesize polyurethane polymers. Structurally diverse tartarimides were conveniently obtained from the condensation reactions of tartaric acid with various primary amine compounds. The diol structure of the generated tartarimides allowed to access polyurethanes along with the polymerizations of diisocyanate monomers. Copolymers in the range of 22.9 kDa to 29.3 kDa molecular weights were obtained with moderately high total monomer conversions (up to 96%). Depending on the tartarimide and diisocyanate monomers employed during polymerization, copolymers with different physical and thermal properties were generated. By utilizing tartarimides carrying furan and alkene functionalities, side chain reactive polyurethanes were synthesized. These reactive polymers were evaluated in post-polymerization modification and crosslinking processes by using radical thiol-ene and Diels-Alder based click reactions. The results obtained in this study demonstrated that the bio-sourced tartarimides could provide a convenient access to structurally tailorable polyurethane polymers that are important materials in various applications.

Tunable, reagent‐loaded polyurethane nanocapsules cleavable by NIR light

AbstractDual response polyurethane nanocapsules consisting of a hydrophilic core are synthesized via interfacial polyaddition of the diisocyanate monomers and different diols (VA‐060 and glycols) in inverse miniemulsion process. The presence of the water‐soluble NIR dye in the core and azo‐bonds in the polymer shell allows the selective release of encapsulated material triggered by temperature or NIR light. The capsules are characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The capsule degradation under external stimuli, like temperature and NIR light, is confirmed microscopically by TEM. Macroscopic evidence of the capsule cleavage was achieved by the incorporation of the chemical into the capsule core, and subsequent treatment of the capsules with NIR laser in the presence of the suitable reagent outside the capsules. A color‐forming chemical reaction occurred after the shell opening. The reactions were easily detected by visual observation of a color change and by UV–Vis spectroscopy.

4,4’-Methylene diphenyl diisocyanate exposure induces expression of alternatively activated macrophage-associated markers and chemokines partially through Krüppel-like factor 4 mediated signaling in macrophages

Occupational exposure to the most widely used monomeric diisocyanate (dNCO), 4,4’-methylene diphenyl diisocyanate (MDI), may lead to the development of occupational asthma (OA). Alveolar macrophages with alternatively activated (M2) phenotype have been implicated in allergic airway responses and the pathogenesis of asthma. Recent in vivo studies demonstrate that M2 macrophage-associated markers and chemokines are induced by MDI-exposure, however, the underlying molecular mechanism(s) by which this proceeds is unclear. Following MDI exposure (in vivo and in vitro) M2 macrophage-associated transcription factors (TFs), markers, and chemokines were determined by RT-qPCR, western blots, and ELISA. Expression of M2 macrophage-associated TFs and markers including Klf4/KLF4, Cd206/CD206, Tgm2/TGM2, Ccl17/CCL17, Ccl22/CCL22, and CCL24 were induced by MDI/MDI-GSH exposure in bronchoalveolar lavage cells (BALCs)/THP-1 macrophages. The expression of CD206, TGM2, CCL17, CCL22, and CCL24 are upregulated by 3.83-, 7.69-, 6.22-, 6.08-, and 1.90-fold in KLF4-overexpressed macrophages, respectively. Endogenous CD206 and TGM2 were downregulated by 1.65-5.17-fold, and 1.15-1.78-fold, whereas CCL17, CCL22, and CCL24 remain unchanged in KLF4-knockdown macrophages. Finally, MDI-glutathione (GSH) conjugate-treated macrophages show increased chemotactic ability to T-cells and eosinophils, which may be attenuated by KLF4 knockdown. Our data suggest that MDI exposure may induce M2 macrophage-associated markers partially through induction of KLF4.

Pyrolysis acetylation: A novel on-line Py-GC-MS derivatisation for the characterisation of nitrogen-containing polymers

Several on-line chemical reactions have been combined with Py-GC-MS to improve the chromatographic behaviour of polar pyrolysis products. Derivatisations, principally methylation and silylation, have been widely employed to the analysis of oxygenated pyrolysis products, while the conversion of nitrogen-containing compounds resulted more challenging. The present study shows that amines can be efficiently converted into the corresponding N-substituted amides (acetamides) by conducting pyrolysis in the presence of acetic anhydride (PyAc). PyAc was assessed on three common N-containing polymer families, polyethylenimine (PEI, linear and branched), polyurethane (PUR, based on the methylenediphenyl diisocianate monomer) and nylons (polyamide PA6 and PA66). Upon PyAc, PEI produced a series of N-methyl, ethyl, ethenyl acetamides indicative of the formation of several alkylated monoamines that were more difficult to detect in the free form by conventional Py-GC-MS. Acetyl derivatives of linear acyclic polyamines and piperazines were also identified confirming previous investigations. In the case of PUR, the acetylated 4,4′-diaminodiphenylmethane was generated along with the diisocyanate monomer. PyAc of PA66 produced the acetyl derivative of 1,6-hexyldiamine, while the caprolactam of PA6 was only partially acetylated. The effectiveness of acetylation was confirmed by PyAc of calibration standards for microplastic analysis. Besides the acetylated amines distinctive of PUR and PA66, the acetylated forms of 1,4-butandiol from PUR and bisphenol A from polycarbonate were detected. The results showed the potential of extension of PyAc to other polymer families and highlighted some weaknesses to be solved.

Polyurethane-based crosslinked polymer with tunable self-healable and mechanical properties

In practical applications, the scratch or damage of materials are inevitable. Self-healing materials are beneficial to the sustainable use of materials. Herein, the dual cross-linked self-healing polyurethane (PU-xUPy) were prepared by copolymerization of diisocyanate monomers, quadruple hydrogen bond chain extender based on 2‐ureido‐4[1H]‐pyrimidinone (UPy) and triol monomers. The PU-xUPy exhibit excellent mechanical properties owing to the covalent cross-linking via triol monomer and the noncovalent-linking via UPy. The tensile strength and elongation at break of PU-75UPy were 9.6 MPa and 420.1%, respectively. The self-healing efficiency of the tensile strength and elongation at break were achieved to 73% (the tensile strength is 7.0 MPa) and 72.7% (the elongation at break is 306.6%) after 24 h of healing at 40 ℃, respectively. Moreover, the cyclic fatigue tensile test provided the evidences of the breaking and recombination of hydrogen bonds. These promising outcomes are expected to promote the development of the sustainable application of polyurethane elastomers.

Can Modification with Urethane Derivatives or the Addition of an Anti-Hydrolysis Agent Influence the Hydrolytic Stability of Resin Dental Composite?

Due to the questionable durability of dental restorations, there is a need to increase the lifetime of composite restoration. The present study used diethylene glycol monomethacrylate/4,4'-methylenebis(cyclohexyl isocyanate) (DEGMMA/CHMDI), diethylene glycol monomethacrylate/isophorone diisocyanate (DEGMMA/IPDI) monomers, and bis(2,6-diisopropylphenyl)carbodiimide (CHINOX SA-1) as modifiers of a polymer matrix (40 wt% urethane dimethacrylate (UDMA), 40 wt% bisphenol A ethoxylateddimethacrylate (bis-EMA), and 20 wt% triethyleneglycol dimethacrylate (TEGDMA)). Flexural strength (FS), diametral tensile strength (DTS), hardness (HV), sorption, and solubility were determined. To assess hydrolytic stability, the materials were tested before and after two aging methods (I-7500 cycles, 5 °C and 55 °C, water and 7 days, 60 °C, 0.1 M NaOH; II-5 days, 55 °C, water and 7 days, 60 °C, 0.1 M NaOH). The aging protocol resulted in no noticeable change (median values were the same as or higher than the control value) or a decrease in the DTS value from 4 to 28%, and a decrease in the FS value by 2 to 14%. The hardness values after aging were more than 60% lower than those of the controls. The used additives did not improve the initial (control) properties of the composite material. The addition of CHINOX SA-1 improved the hydrolytic stability of composites based on UDMA/bis-EMA/TEGDMA monomers, which could potentially extend the service life of the modified material. Extended studies are needed to confirm the possible use of CHINOX SA-1 as an antihydrolysis agent in dental composites.

Construction of Porous Polyureas and Polyamides via Domino Polymerization and Their High-Efficiency Au(III) Adsorption.

The adoption of new synthesis strategy and monomers significantly promotes the construction of porous organic polymers (POPs) and their promising applications. A fabricating method of porous polyimides is developed via sequential imidization and cross-linking reaction among self-condensable building blocks, as reported in the authors' previous manuscript. Herein, porous polyureas (A-POPs) are prepared starting from 4-ethynylaniline and diisocyanate monomers, while porous polyamides (B-POPs) are synthesized from 4-ethynylbenzoic acid and diisocyanate monomers. It is found that decreasing the monomer content in solvent can effectively inhibit the premature phase separation and facilitate the evolution of integrated network. Eventually, a maximum surface area of 425m2 g-1 is achieved for porous polyureas when the content of monomers is 10%. To the best knowledge, A-POPs are the porous polyureas with the highest surface areas reported up to now. The as-prepared porous polyurea (AN-POP) exhibits the maximum adsorption capacity of 1093.87 ± 5.23mgg-1 and removal rate of 99.96% for Au(III), due to its high surface area and the coordination between the heteroatoms (N and O) in A-POPs and metal ions. Besides, the porous polyurea also exhibits excellent renewable efficiency and high selectivity to Au(III).

A novel treatment and derivatization for quantification of residual aromatic diisocyanates in polyamide resins

In the scientific context, the environmental and healthy impact of polymers is more related to the residual monomer content rather than their macromolecular structure, due to the monomer capability to interact with membrane cells. For this a novel method to stabilize and quantify residual monomeric isocyanates in high thermal resistance polyamide resins (PAs) has been developed. This new analytical method resulted in an improvement concerning the quantification of residual aromatic diisocyanates in viscous polymeric matrices by using a simple and cheap technique like HPLC-VWD. Diisocyanate monomers were derivatized with dibutylamine, resulting in stable urea derivatives that were simultaneously analysed and quantified. The method was applied to solvent-based polyamide resins, used as primary electrical insulation, for avoiding additional step of solvent removing before the analysis. The quantification of residual monomers answers to the provisions imposed by European Regulation N. 1907/2006 (REACH) for polymer registration, and the necessity of an early evaluation of the occupational risk associated with the use of diisocyanates, due to their toxicity and high reactivity towards moisture.

Assessment of personal inhalation and skin exposures to polymeric methylene diphenyl diisocyanate during polyurethane fabric coating.

Methylene diphenyl diisocyanate (MDI) monomers and polymeric MDI (pMDI) are aromatic isocyanates widely used in the production of polyurethanes. These isocyanates can cause occupational asthma, hypersensitivity pneumonitis, as well as contact dermatitis. Skin exposure likely contributes toward initial sensitization but is challenging to monitor and quantitate. In this work, we characterized workers' personal inhalation and skin exposures to pMDI in a polyurethane fabric coating factory for subsequent health effect studies. Full-shift personal and area air samples were collected from eleven workers in representative job areas daily for 1-2weeks. Skin exposure to hands was evaluated concomitantly with a newly developed reagent-impregnated cotton glove dosimeter. Samples were analyzed for pMDI by liquid chromatography-tandem mass spectrometry. In personal airborne samples, the concentration of 4,4'-MDI isomer, expressed as total NCO, had a geometric mean (GM) and geometric standard deviation (GSD) of 5.1 and 3.3ng NCO/m3, respectively (range: 0.5-1862ng NCO/m3). Other MDI isomers were found at much lower concentrations. Analysis of 4,4'-MDI in the glove dosimeters exhibited much greater exposures (GM: 10ng/cm2) and substantial variability (GSD: 20ng NCO/cm2; range: 0-295ng NCO/cm2). MDI inhalation exposure was well below occupational limits for MDI for all the job areas. However, MDI skin exposure to hands was substantial. These findings demonstrated the potential for substantial isocyanate skin exposure in work settings with very low airborne levels. This exposure characterization should inform future studies that aim to assess the health effects of work exposures to MDI and the effectiveness of protective measures.

Exploring structure/property relationships to health and environmental hazards of polymeric polyisocyanate prepolymer substances-2. Dermal sensitization potential in the mouse local lymph node assay.

The sensitization potencies of twenty custom-designed monomer-depleted polymeric polyisocyanate prepolymer substances and their associated toluene diisocyanate (TDI), methylene diphenyl diisocyanate (MDI), hexamethylene diisocyanate (HDI), and isophorone diisocyanate (IPDI) monomer precursors were investigated by means of the mouse Local Lymph Node Assay (LLNA). These polymeric prepolymers were designed to represent the structural features and physical-chemical properties exhibited by a broad range of commercial polymeric polyisocyanate prepolymers that are produced from the reaction of aromatic and aliphatic diisocyanate monomers with aliphatic polyether and polyester polyols. The normalization of LLNA responses to the applied (15-45-135mM) concentrations showed that the skin sensitization potency of polymeric polyisocyanate prepolymers is at least 300 times less than that of the diisocyanate monomers from which they are derived. The sensitization potency of the prepolymers was shown to be mainly governed by their hydrophobicity (as expressed by the calculated octanol-water partition coefficient, log Kow) and surfactant properties. Neither hydrophilic (log Kow <0) nor very hydrophobic (log Kow >25) prepolymers stimulated lymphocyte proliferation beyond that of the dosing vehicle control. The findings of this investigation challenge the generally held assumption that all isocyanate (-N=C=O) bearing substances are potential skin (and respiratory) sensitizers. Further, these findings can guide the future development of isocyanate chemistries and associated polyurethane applications toward reduced exposure and health hazard potentials.

A brief overview of properties and reactions of diisocyanates.

By way of introduction to the special issue on diisocyanates and their corresponding diamines, this brief overview presents, for the most commonly used diisocyanate monomers, a selection of physical-chemical properties that are relevant to exposure in the workplace and in the general environment, as well as a concise overview of diisocyanate reactions and some of their toxicological implications.

Viability of cultured human skin cells treated with 1,6-hexamethylene diisocyanate monomer and its oligomer isocyanurate in different culture media

The isocyanate monomer 1,6-hexamethylene diisocyanate (HDI) and one of its trimers, HDI isocyanurate, are airway and skin sensitizers contained in polyurethane paint. The toxic response of cultured skin cells to these compounds was measured by evaluating the isocyanate concentrations at which 50% of the cells die (i.e., lethal concentration 50%, LC50) because the relative toxicity of each form of HDI should be considered when exposure limits of HDI-based paints are set. By using a luminescent ATP-viability assay, we compared the cytotoxic effects of HDI monomer and HDI isocyanurate on cultured human skin cells (keratinocytes, fibroblasts, and melanocytes) after 4-h isocyanate exposures using culture media with varying levels of nutrients in order to also determine the effects of media composition on isocyanate toxicity. Before analysis, experimental wells were normalized to controls containing cells that were cultured with the same vehicle and media. The measured mean LC50 values ranged from 5 to 200 µM across the experimental conditions, in which HDI isocyanurate in protein-devoid media was the most toxic to cells, producing the lowest LC50 values. For HDI monomer, keratinocytes were the most resistant to its toxicity and melanocytes were the most susceptible. However, when exposed to HDI isocyanurate, the opposite was observed, with melanocytes being the most resilient and the keratinocytes and fibroblasts were more susceptible. Depending on the type of skin cells, dose–response data indicated that HDI isocyanurate was 2–6 times more toxic than HDI monomer when using protein-devoid media whereas HDI isocyanurate was 4–13 times more toxic than HDI monomer when protein-rich media was used. Therefore, if the protein-devoid saline medium alone were used for these experiments, then a significant under-estimation of their relative toxicities in protein-rich environments would have resulted. This difference is because HDI monomer toxicity was more attenuated by the presence of protein in the culture media than HDI isocyanurate toxicity. Thus, conclusions based on comparative toxicity studies and consequent inference applied to potential human toxicity can be affected by in vitro culture media conditions. The physiochemical difference in reactivity of the two forms of HDI to biological molecules most likely explains the observed toxicity differences and may have implications for skin penetration, adverse effects like skin sensitization, and systemic responses like asthma. Future studies are warranted to investigate differences in the biological availability, cellular toxicity, and immunologic sensitization mechanisms for HDI monomer and HDI isocyanurate.

MicroRNA-mediated calcineurin signaling activation induces CCL2, CCL3, CCL5, IL8, and chemotactic activities in 4,4′-methylene diphenyl diisocyanate exposed macrophages

Occupational exposure to 4,4′-methylene diphenyl diisocyanate (MDI), the most widely used monomeric diisocyanate, is one of the leading causes of occupational asthma (OA). Previously, we identified microRNA (miR)-206-3p/miR-381-3p-mediated PPP3CA/calcineurin signalling regulated iNOS transcription in macrophages and bronchoalveolar lavage cells (BALCs) after acute MDI exposure; however, whether PPP3CA/calcineurin signalling participates in regulation of other asthma-associated mediators secreted by macrophages/BALCs after MDI exposure is unknown. Several asthma-associated, macrophage-secreted mediator mRNAs from MDI exposed murine BALCs and MDI-glutathione (GSH) conjugate treated differentiated THP-1 macrophages were analysed using RT-qPCR. Endogenous IL1B, TNF, CCL2, CCL3, CCL5, and TGFB1 were upregulated in MDI or MDI-GSH conjugate exposed BALCs and macrophages, respectively. Calcineurin inhibitor tacrolimus (FK506) attenuated the MDI-GSH conjugate-mediated induction of CCL2, CCL3, CCL5, and CXCL8/IL8 but not others. Transfection of either miR-inhibitor-206-3p or miR-inhibitor-381-3p in macrophages induced chemokine CCL2, CCL3, CCL5, and CXCL8 transcription, whereas FK506 attenuated the miR-inhibitor-206-3p or miR-inhibitor-381-3p-mediated effects. Finally, MDI-GSH conjugate treated macrophages showed increased chemotactic ability to various immune cells, which may be attenuated by FK506. In conclusion, these results indicate that MDI exposure to macrophages/BALCs may recruit immune cells into the airway via induction of chemokines by miR-206-3p and miR-381-3p-mediated calcineurin signalling activation.

Epigenetic Markers Are Associated With Differences in Isocyanate Biomarker Levels in Exposed Spray-Painters.

Isocyanates are respiratory and skin sensitizers that are one of the main causes of occupational asthma globally. Genetic and epigenetic markers are associated with isocyanate-induced asthma and, before asthma develops, we have shown that genetic polymorphisms are associated with variation in plasma and urine biomarker levels in exposed workers. Inter-individual epigenetic variance may also have a significant role in the observed biomarker variability following isocyanate exposure. Therefore, we determined the percent methylation for CpG islands from DNA extracted from mononuclear blood cells of 24 male spray-painters exposed to 1,6-hexamethylene diisocyanate (HDI) monomer and HDI isocyanurate. Spray-painters’ personal inhalation and skin exposure to these compounds and the respective biomarker levels of 1,6-diaminohexane (HDA) and trisaminohexyl isocyanurate (TAHI) in their plasma and urine were measured during three repeated industrial hygiene monitoring visits. We controlled for inhalation exposure, skin exposure, age, smoking status, and ethnicity as covariates and performed an epigenome-wide association study (EWAS) using likelihood-ratio statistical modeling. We identified 38 CpG markers associated with differences in isocyanate biomarker levels (Bonferroni < 0.05). Annotations for these markers included 18 genes: ALG1, ANKRD11, C16orf89, CHD7, COL27A, FUZ, FZD9, HMGN1, KRT6A, LEPR, MAPK10, MED25, NOSIP, PKD1, SNX19, UNC13A, UROS, and ZFHX3. We explored the functions of the genes that have been published in the literature and used GeneMANIA to investigate gene ontologies and predicted protein-interaction networks. The protein functions of the predicted networks include keratinocyte migration, cell–cell adhesions, calcium transport, neurotransmitter release, nitric oxide production, and apoptosis regulation. Many of the protein pathway functions overlap with previous findings on genetic markers associated with variability both in isocyanate biomarker levels and asthma susceptibility, which suggests there are overlapping protein pathways that contribute to both isocyanate toxicokinetics and toxicodynamics. These predicted protein networks can inform future research on the mechanism of allergic airway sensitization by isocyanates and aid in the development of mitigation strategies to better protect worker health.

Cosolvent-Driven Interfacial Polymerization for Superior Separation Performance of Polyurea-Based Pervaporation Membrane.

A thin-film composite (TFC) polyurea membrane was fabricated for the dehydration of an aqueous tetrahydrofuran (THF) solution through interfacial polymerization, wherein polyethyleneimine (a water-soluble amine monomer) and m-xylene diisocyanate (an oil-soluble diisocyanate monomer) were reacted on the surface of a modified polyacrylonitrile (mPAN) substrate. Cosolvents were used to tailor the membrane properties and increase the membrane permeation flux. Four types of alcohols that differed in the number of carbon (methanol, ethanol, isopropanol, and tert-butanol) were added as cosolvents, serving as swelling agents, to the aqueous-phase monomer solution, and their effect on the membrane properties and pervaporation separation was discussed. Attenuated total reflection Fourier transform infrared spectroscopy confirmed the formation of a polyurea layer on mPAN. Field emission scanning electron microscopy and surface water contact angle analysis indicated no change in the membrane morphology and hydrophilicity, respectively, despite the addition of cosolvents for interfacial polymerization. The TFC membrane produced when ethanol was the cosolvent exhibited the highest separation performance (permeation flux = 1006 ± 103 g·m−2·h−1; water concentration in permeate = 98.8 ± 0.3 wt.%) for an aqueous feed solution containing 90 wt.% THF at 25 °C. During the membrane formation, ethanol caused the polyurea layer to loosen and to acquire a certain degree of cross-linking. The optimal fabrication conditions were as follows: 10 wt.% ethanol as cosolvent; membrane curing temperature = 50 °C; membrane curing time = 30 min.

Influence of Genetic Variance on Biomarker Levels After Occupational Exposure to 1,6-Hexamethylene Diisocyanate Monomer and 1,6-Hexamethylene Diisocyanate Isocyanurate.

We evaluated the impact of genetic variance on biomarker levels in a population of workers in the automotive repair and refinishing industry who were exposed to respiratory sensitizers 1,6-hexamethylene diisocyanate (HDI) monomer and one of its trimers, HDI isocyanurate. The exposures and respective urine and plasma biomarkers 1,6-diaminohexane (HDA) and trisaminohexyl isocyanurate (TAHI) were measured in 33 workers; and genome-wide microarrays (Affymetrix 6.0) were used to genotype the workers’ single-nucleotide polymorphisms (SNPs). Linear mixed model analyses have indicated that interindividual variations in both inhalation and skin exposures influenced these biomarker levels. Using exposure values as covariates and a false discovery rate < 0.10 to assess statistical significance, we observed that seven SNPs were associated with HDA in plasma, five were associated with HDA in urine, none reached significance for TAHI in plasma, and eight were associated with TAHI levels in urine. The different genotypes for the 20 significant SNPs accounted for 4- to 16-fold changes observed in biomarker levels. Associated gene functions include transcription regulation, calcium ion transport, vascular morphogenesis, and transforming growth factor beta signaling pathway, which may impact toxicokinetics indirectly by altering inflammation levels. Additionally, in an expanded analysis using a minor allele cutoff of 0.05 instead of 0.10, there were biomarker-associated SNPs within three genes that have been associated with isocyanate-induced asthma: ALK, DOCK2, and LHPP. We demonstrate that genetic variance impacts the biomarker levels in workers exposed to HDI monomer and HDI isocyanurate and that genetics can be used to refine exposure predictions in small cohorts when quantitative personal exposure and biomarker measurements are included in the models.

Phosgene-free and Chemoselective Synthesis of Novel Polyureas from Activated l-Lysine with Diphenyl Carbonate

Nα,Ne-(Phenoxycarbonyl)-l-lysine methyl ester 1a can be expected to behave as a difunctional blocked diisocyanate monomer derived from l-lysine with diphenyl carbonate. In this report, we examined ...

Tough and Multi-Recyclable Cross-Linked Supramolecular Polyureas via Incorporating Noncovalent Bonds into Main-Chains.

Covalent thermosets generally exhibit robust mechanical properties, while they are fragile and lack the ability to be reprocessed or recycled. Herein, a new strategy of incorporating noncovalent bonds into main-chains is developed to construct tough and multi-recyclable cross-linked supramolecular polyureas (CSPU), which are prepared via the copolymerization of diisocyanate monomers, noncovalently bonded diamine monomers linked by quadruple hydrogen bonds, and covalent diamine/triamine monomers. The CSPU exhibit remarkable solvent resistance and outstanding mechanical properties owing to the covalent cross-linking via triamine monomer. Through the incorporation of 9.7% and 14.6% quadruple hydrogen bonded diamine monomer, the transparent CSPU films are endowed with superior toughness of 74.17 and 124.17 MJm-3 , respectively. Impressively, even after five generations of recycling processes, the mechanical properties of reprocessed CSPU can recover more than 95% of their original properties, displaying excellent multiple recyclablity. As a result, the superior toughness, remarkable solvent resistance, high transparency, and excellent multiple recyclability are well-combined in the CSPU. It is highly anticipated that this line of research will provide a facile and general method to construct various cross-linked polymer materials with superior recyclability and mechanical properties.

Determination and analysis of harmful components in synthetic running tracks from Chinese primary and middle schools

In China, incidences involving pupils suffering health problems caused by synthetic running tracks have attracted the public’s attention. However, the existence of known and unknown harmful chemicals in the tracks have not yet been explored. Here, the levels of 16 known harmful ingredients were firstly analyzed in 167 school running tracks. In all samples, the recognized toxic solvents and additives, such as the benzene series, soluble mercury, 3,3′-dichloro-4,4′-diaminodiphenylmethane (MOCA) and toluene diisocyanate monomer (TDI) were under the limits of detection. In contrast, polycyclic aromatic hydrocarbons (PAHs), phthalates, Short chain chlorinated paraffins (SCCPs) soluble lead, cadmium and chromium were found in 86%, 88%, 46%, 81%, 43% and 83% of the specimens, respectively. The levels, toxicology and distribution of these known chemicals were evaluated. Then, a static-headspace gas chromatography-mass spectrometer (GC-MS) method in full scan mode was employed to screen for unknown volatile chemicals. Three groups of chemicals reflecting different kinds of pollution sources were discovered: new solvents, such as N, N-Dimethylformamide, new additives, such as 2-ethylhexanoic acid, and by-products, such as carbon disulfide. In summary, the existence of potential risk factors in school plastic tracks was revealed through exhaustive testing. Moreover, most of the hazardous components detected have been recently included in a new national standard to improve the safety performance of synthetic running tracks.

Biobased Polyurethane Coatings with High Biomass Content: Tailored Properties by Lignin Selection

New biobased polyurethane (PU) coatings with high lignin content were developed and characterized in this work. These materials were based on a ?,?-diisocyanate monomer (1,4-bis(4-isocyanato-2-methoxyphenoxy)butane, VA-NCO) obtained from lignin-derived vanillic acid and its further cross-linking reaction with three different nonchemically modified technical lignins obtained from different pulping processes, namely, mild acetone organosolv, kraft, and soda. After determining the optimal VA-NCO/lignin mass ratio for each type of lignin, an in-depth characterization of the obtained PU coatings highlighted their high biomass content, effective cross-linking, improved thermal stability, hydrophobic character, good adhesion performance on different types of substrates, and tunable mechanical response. These properties were found to be well-correlated to the chemical-physical features of the parent lignins used (namely, molecular weight, glass transition temperature, distribution of phenylpropane subunits, and -OH content), thereby suggesting the possibility to predictively tailor the characteristics of such biobased PU coatings by lignin selection. The results of this study demonstrate that the reaction of a lignin-derived biobased diisocyanate with different chemically unmodified technical lignins represents an interesting pathway for the production of thermosetting PU coatings with a high biomass content that can find application as high-performance biobased materials alternative to traditional petroleum-based platforms. © 2019 American Chemical Society.