Diiron Complexes Research Articles

Synthesis and characterization of a model complex for flavodiiron NO reductases that stabilizes a diiron mononitrosyl complex

Flavodiiron NO reductases (FNORs) are important enzymes in microbial pathogenesis, as they equip microbes with resistance to the human immune defense agent nitric oxide (NO). DFT calculations predict that a network of second coordination sphere (SCS) hydrogen bonds is critical for the key NN coupling step in the NO reduction reaction catalyzed by FNORs. In this study, we report the synthesis of a model complex of FNORs with pendant hydrogen bond donors. For this purpose, the ligand H[BPMP] (= 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol) was modified with two amide groups in the SCS. Reaction of the precursor complex [Fe2(BPMP(NHCOtBu)2)(OAc)](OTf)2 (1) (OTf− = triflate anion) with NO in the presence of base led to the surprising isolation of a diiron mononitrosyl complex, [Fe2(BPMP(NHCOtBu)(NCOtBu))(OAc)(NO)](OTf) (2) and a triiron decomposition product, [Fe3(BPMP(NHCOtBu)2)(OAc)2(μ-O)2(ONO)](OTf) (3), which were both structurally characterized. Complex 2 models the corresponding mononitrosyl adduct in FNORs. This result points towards a strategy that can be used to stabilize mononitrosyl diiron complexes, using the SCS.

Cyanide-alkene competition in a diiron complex and isolation of a multisite (cyano)alkylidene-alkene species.

The μ-(amino)alkylidyne complex [Fe2Cp2(CO)2(μ-CO){μ-CNMe(CH2CHCH2)}]CF3SO3, [1]CF3SO3, reacted with NBu4CN in dichloromethane affording the μ-(cyano)(amino)alkylidene [Fe2Cp2(CO)2(μ-CO){μ-C(CN)N(Me)(CH2CHCH2)}], 2, in 91% yield. Decarbonylation of 2 by using Me3NO in acetone at room temperature yielded [Fe2Cp2(CO)(μ-CO){μ-κ3C-C(CN)N(Me)(CH2CHCH2)}], 3, containing a multidentate alkylidene-alkene ligand occupying both a bridging site and a terminal site, in admixture with the μ-(amino)alkylidyne cyanide product [Fe2Cp2(CN)(CO)(μ-CO){μ-CN(Me)(CH2CHCH2)}], 4. The reaction of the μ-(amino)alkylidyne imine complex [Fe2Cp2(CO)(μ-CO)(NHCPh2){μ-CN(Me)(CH2CHCH2)}]CF3SO3, [7]CF3SO3, with NBu4CN gave 3 with an optimized yield of 75% via imine elimination. According to DFT calculations, 3 is less stable than its geometric isomer 4 by 13.4 kcal mol-1 and quantitative conversion to 4 was achieved by refluxing a THF solution of 3 for 2 hours. No replacement of alkene coordination occurred upon treating 3 with CO or PPh3. The previously unknown compounds 2, 3, 4 and [7]CF3SO3 were fully characterized by analytical and spectroscopic techniques and the structure of 3 was elucidated by single crystal X-ray diffraction.

Combining metal-metal cooperativity, metal-ligand cooperativity and chemical non-innocence in diiron carbonyl complexes.

Several metalloenzymes, including [FeFe]-hydrogenase, employ cofactors wherein multiple metal atoms work together with surrounding ligands that mediate heterolytic and concerted proton–electron transfer (CPET) bond activation steps. Herein, we report a new dinucleating PNNP expanded pincer ligand, which can bind two low-valent iron atoms in close proximity to enable metal–metal cooperativity (MMC). In addition, reversible partial dearomatization of the ligand's naphthyridine core enables both heterolytic metal–ligand cooperativity (MLC) and chemical non-innocence through CPET steps. Thermochemical and computational studies show how a change in ligand binding mode can lower the bond dissociation free energy of ligand C(sp3)–H bonds by ∼25 kcal mol−1. H-atom abstraction enabled trapping of an unstable intermediate, which undergoes facile loss of two carbonyl ligands to form an unusual paramagnetic (S = ) complex containing a mixed-valent iron(0)–iron(i) core bound within a partially dearomatized PNNP ligand. Finally, cyclic voltammetry experiments showed that these diiron complexes show catalytic activity for the electrochemical hydrogen evolution reaction. This work presents the first example of a ligand system that enables MMC, heterolytic MLC and chemical non-innocence, thereby providing important insights and opportunities for the development of bimetallic systems that exploit these features to enable new (catalytic) reactivity.

Linear Scaling Relationships to Predict pKa's and Reduction Potentials for Bioinspired Hydrogenase Catalysis.

Biomimetic catalysts inspired by the active site of the [FeFe] hydrogenase enzyme can convert protons into molecular hydrogen. Minimizing the overpotential of the electrocatalytic process remains a major challenge for practical application of the catalyst. The catalytic cycle of the hydrogen production follows an ECEC mechanism (E represents an electron transfer step, and C refers to a chemical step), in which the electron and proton transfer steps can be either sequential or coupled (PCET). In this study, we have calculated the pKa’s and the reduction potentials for a series of commonly used ligands (80 different complexes) using density functional theory. We establish that the required acid strength for protonation at the Fe–Fe site correlates with the standard reduction potential of the di-iron complexes with a linear energy relationship. These linear relationships allow for fast screening of ligands and tuning of the properties of the catalyst. Our study also suggests that bridgehead ligand properties, such as bulkiness and aromaticity, can be exploited to alter or even break the linear scaling relationships.

Mixed Valence (μ-Phenoxido) FeII FeIII and FeIII FeIV Compounds: Electron and Proton Transfers.

Mixed-valence non-heme diiron centers are present at the active sites of a few enzymes and confer them interesting reactivities with the two ions acting in concert. Related (μ-phenoxido)diiron complexes have been developed as enzyme mimics. They exhibit very rich spectroscopic properties enabling independent monitoring of each individual ion, which proved useful for mechanistic studies of catalytic hydrolysis and oxidation reactions. In our studies of such complexes, we observed that these compounds give rise to a wide variety of electron transfers (intervalence charge transfer), proton transfers (tautomerism), coupled electron and proton transfers (H. abstraction and PCET). In this minireview, we present and analyze the main results illustrating the latter aspects.

A Synthetic Model for the Possible FeIV2(μ-O)2 Core of Methane Monooxygenase Intermediate Q Derived from a Structurally Characterized FeIIIFeIV(μ-O)2 Complex.

A bis(μ-oxo)diiron(IV,IV) complex as a model for intermediate Q in the methane monooxygenase reaction cycle has been prepared. The precursor complex with a [FeIIIFeIV(μ-O)2] core was fully characterized by X-ray crystallography and other spectroscopic analyses and was converted to the [FeIV2(μ-O)2] complex via electrochemical oxidation at 1000 mV (vs Ag/Ag+) in acetone at 193 K. The UV-vis spectral features, Mössbauer parameters (ΔEQ = 2.079 mm/s and δ = -0.027 mm/s), and EXAFS analysis (Fe-O/N = 1.73/1.96 Å and Fe···Fe = 2.76 Å) support the structure of the low-spin (S = 1, for each Fe) [FeIV2(μ-O)2] core. The rate constants of the hydrogen abstraction reaction from 9,10-dihydroanthracene at 243 K suggest the high reactivity of these synthetic bis(μ-oxo)diiron complexes supported by simple N4 tripodal ligand.

Generation of a Sulfinamide Species from Facile N-O Bond Cleavage of Nitrosobenzene by a Thiolate-Bridged Diiron Complex.

The activation of nitrosobenzene promoted by transition-metal complexes has gained considerable interest due to its significance for understanding biological processes and catalytic C-N bond formation processes. Despite intensive studies in the past decades, there are only limited cases where electron-rich metal centers were commonly employed to achieve the N-O or C-N bond cleavage of the coordinated nitrosobenzene. In this regard, it is significant and challenging to construct a suitable functional system for examining its unique reactivity toward reductive activation of nitrosoarene. Herein, we present a {Fe2S2} functional platform that can activate nitrosobenzene via an unprecedented iron-directed thiolate insertion into the N-O bond to selectively generate a well-defined diiron benzenesulfinamide complex. Furthermore, computational studies support a proposal that in this concerted four-electron reduction process of nitrosobenzene the iron center serves as an important electron shuttle. Notably, compared to the intact bridging nitrosoarene ligand, the benzenesulfinamide moiety has priority to convert into aniline in the presence of separate or combined protons and reductants, which may imply the formation of the sulfinamide species accelerates reduction process of nitrosoarene. The reaction pattern presented here represents a novel activation mode of nitrosobenzene realized by a thiolate-bridged diiron complex.

Insoluble hyaluronan films obtained by heterogeneous crosslinking with iron(III) as resorbable implants

We present water-insoluble hyaluronan films crosslinked by trivalent iron developed as potential resorbable implants. The films were crosslinked by sorption of ferric salt into solid HA films in water/2-propanol bath. These heterogeneously crosslinked films (het-FeHA) remained tough and dimensionally stable when rehydrated in saline. In contrast, films prepared by drying the well-known homogeneous ferric hyaluronate gels (hom-FeHA) softened upon rehydration and expanded rapidly. Differences between hom-FeHA and het-FeHA result from polymer network topology (dominant inter- or intra-molecular crosslink, respectively). Moreover, Mössbauer spectroscopy of het-FeHA revealed diiron complexes, while iron in the hom-FeHA was present exclusively as γ-FeOOH nanoparticles or amorphous FeOOH. The biocompatibility tests of het-FeHA did not show any adverse effect and the sample disintegrated within one day when implanted in mice peritoneum. In conclusion, we developed implantable hyaluronan-based free-standing film with minimal swelling that can be resorbed quickly enough to avoid induction of foreign-body reaction.

Cooperative Co-Activation of Water and Hypochlorite by a Non-Heme Diiron(III) Complex.

Aqueous solutions of the iron(III) complex of N,N,N'-tris(2-pyridylmethyl)ethylenediamine-N'-acetate (tpena) react with hypochlorite (ClO-) to produce the reactive high-valent [FeIV(O)(tpena)]+. Under catalytic conditions, in bicarbonate-buffered media (pH 8) with a set ionic strength (10 mM NaCl), kinetic analysis shows that two equivalents of [FeIV(O)(tpena)]+ per one ClO- are produced, with benign chloride ions the only byproduct. An unprecedented supramolecular activation of ClO- by {(HCO3)⊂[(tpena)FeIII(μ-O)FeIII(Htpena)]}2+ is proposed. This mode of activation has great advantage for use in the catalytic oxidation of C-H bonds in water since: (i) the catalyst scaffold is protected from oxidative degradation and (ii) undesirable radical side reactions which produce toxic chlorinated compounds are circumvented by this novel coactivation of water and ClO-. The unique activation mechanism by the Fe-tpena system makes possible the destruction of organic contaminants as an add-on technology to water disinfection by chlorination, demonstrated here through (i) the catalytic oxidation of micropollutant metaldehyde, and (ii) mineralization of the model substrate formate. The resting-state speciation at pH 3, 5, 7, and 9, as well as the catalytically active iron speciation are characterized with Mössbauer and EPR spectroscopy and supported by DFT calculations. Our study provides fundamentally new insights into the design and activation mode of iron-based catalysts relevant to applications in water remediation.

Assessment of density functional theory in studying on the transition states of a Diiron-mediated N[sbnd]N bond cleavage reaction

The structure of transition state is very significant to further understand the related reaction system auxiliary NN bond cleavage process. Here, in order to sort out some DFT functionals in searching the transition states in a NN bond cleavage reaction mediated by the diiron complexes, we compared 49 density functionals with benchmark data of MP2 and DLPNO-CCSD(T) methods. By analyzing the structures and relative energies, we have found two HGGA functionals (B1B95, mPW1PBE) that are more consistently reliable ones. Among them, the B1B95 functional provides the most reliable energetic properties within 8.6 kcal/mol compared with the data of DLPNO-CCSD(T) method. And six HGGA functionals (B1B95, PBE0, mPW1PBE, mPW1PW91, HSEh1PBE, HSE1PBE) and two functionals (B2PLYP-D3, PBE0-D3) with D3 empirical dispersion well optimize the structure of Fe2S2 clusters and evaluate the reaction thermodynamic energy of NN bond cleave process. The functionals with long range correction and D3 empirical dispersion underestimate easily the energy barrier of NN bond cleavage of Fe2S2 clusters.

Anticancer Diiron Vinyliminium Complexes: A Structure-Activity Relationship Study.

A series of 16 novel diiron complexes of general formula [Fe2Cp2(CO)(μ-CO){μ-η1:η3-C(R′)C(R″)CN(R)(Y)}]CF3SO3 (2–7), bearing different substituents on the bridging vinyliminium ligand, was synthesized in 69–95% yields from the reactions of diiron μ-aminocarbyne precursors with various alkynes. The products were characterized by elemental analysis, IR, 1H and 13C NMR spectroscopy; moreover the X-ray structures of 2c (R = Y = CH2Ph, R′ = R″ = Me) and 3a (R = CH2CH=CH2, Y = R′ = Me, R″ = H) were ascertained by single-crystal X-ray diffraction studies. NMR and UV–Vis methods were used to assess the D2O solubility, the stability in aqueous solution at 37 °C and the octanol–water partition coefficients of the complexes. A screening study evidenced a potent cytotoxicity of 2–7 against the A2780 cancer cell line, with a remarkable selectivity compared to the nontumoral Balb/3T3 cell line; complex 4c (R = Cy, Y = R′ = R″ = Me) revealed as the most performant of the series. The antiproliferative activity of a selection of complexes was also assessed on the cisplatin-resistant A2780cisR cancer cell line, and these complexes were capable of inducing a significant ROS production. Moreover, ESI-MS experiments indicated the absence of interaction of selected complexes with cytochrome c and the potentiality to inhibit the thioredoxin reductase enzyme (TrxR).

A Strategy to Conjugate Bioactive Fragments to Cytotoxic Diiron Bis(cyclopentadienyl) Complexes.

A series of bioactive molecules were synthesized from the condensation of aspirin or chlorambucil with terminal alkynes bearing alcohol or amine substituents. Insertion of the resulting alkynes into the iron–carbyne bond of readily accessible diiron bis(cyclopentadienyl) μ-aminocarbyne complexes, [1a,b]CF3SO3, afforded novel diiron complexes with a bridging vinyliminium ligand, [2–10]CF3SO3, functionalized with a bioactive moiety. All compounds were characterized by elemental analysis and IR and multinuclear NMR spectroscopy and in three cases by single-crystal X-ray diffraction. Moreover, the D2O solubility, stability in D2O and cell culture media, and octanol–water partition coefficients of diiron complexes were determined spectroscopically. The cytotoxicity of the complexes was assessed in the tumorigenic A2780 and A2780cisR and the nontumorigenic HEK 293T cell lines. Some complexes exhibit high potency and the ability to overcome resistance in A2780cisR cells (aspirin complexes) or high selectivity relative to HEK 293T cells (chlorambucil complexes). Further studies indicate that the complexes significantly trigger intracellular ROS production, irrespective of the nature of the bioactive fragment. DNA alkylation and protein binding studies were also undertaken.

Redox Reaction between an Oxo-Bridged Diiron Complex and Hydrazine: A Kinetic Study

Objective: Mechanistic investigation of the reaction between the complex ion [FeIII 2(μ-O)(phen)4(H2O)2]4+ (1) (phen = 1,10-phenanthroline) and its hydrolytic derivatives [FeIII 2(μ-O)(phen)4(H2O)(OH)]3+ (1a) and [FeIII 2(μ-O)(phen)4(OH)2]2+ (1b) which coexist in rapid equilibria in the range pH = 3.00 to pH = 5.00 (pKa1 = 3.71 ± 0.03, pKa2 = 5.28 ± 0.07) with N2H5 + ion to produce [Fe(phen)3]2+ has been covered in this study. Methods: Rise in absorbance of the product with time was measured and rates have been determined using initial rate methods. Dependence of rate on pH and concentration of N2H5 + are studied in detail. Results: In the presence of excess phenanthroline, the reaction follows simple first-order exponential profile. Interestingly, in the absence of any added phenanthroline, the reaction becomes faster and the reaction profile changes to nearly linear with curvature near the end of the reaction. Slight autocatalytic nature has been observed only for the slower reactions. The observed rate constants obtained using initial rate method show first-order dependence on the concentration of N2H5 +. An increase in rate with increasing pH has been noticed. The plot of rate versus 1/[H+] shows saturation beginning near pH 4.6, suggesting that the mono-deprotonated form of the complex (i.e. 1a) is the active oxidant in this pH range. Conclusion: Presumably, the reaction becomes faster in the absence of added phenanthroline because ligand dissociation from the parent complex becomes facilitated when there is no external phenanthroline ligand present. This produces a coordinatively unsaturated Fe(III) species which is a faster oxidant.

Easily Available, Amphiphilic Diiron Cyclopentadienyl Complexes Exhibit in Vitro Anticancer Activity in 2D and 3D Human Cancer Cells through Redox Modulation Triggered by CO Release.

A straightforward two‐step procedure via single CO removal allows the conversion of commercial [Fe2Cp2(CO)4] into a range of amphiphilic and robust ionic complexes based on a hybrid aminocarbyne/iminium ligand, [Fe2Cp2(CO)3{CN(R)(R’)}]X (R, R’=alkyl or aryl; X=CF3SO3 or BF4), on up to multigram scales. Their physicochemical properties can be modulated by an appropriate choice of N‐substituents and counteranion. Tested against a panel of human cancer cell lines, the complexes were shown to possess promising antiproliferative activity and to circumvent multidrug resistance. Interestingly, most derivatives also retained a significant cytotoxic activity against human cancer 3D cell cultures. Among them, the complex with R=4‐C6H4OMe and R’=Me emerged as the best performer of the series, being on average about six times more active against cancer cells than a noncancerous cell line, and displayed IC50 values comparable to those of cisplatin in 3D cell cultures. Mechanistic studies revealed the ability of the complexes to release carbon monoxide and to act as oxidative stress inducers in cancer cells.

Metalla-aromatics: Planar, Nonplanar, and Spiro.

ConspectusThe concept of aromaticity is one of the most fundamental principles in chemistry. It is generally accepted that planarity is a prerequisite for aromaticity, and typically the more planar the geometry of an aromatic compound is, the stronger aromatic it is. However, it is not always the case, particularly when transition metals are involved in conjugation and electron delocalization of aromatic systems, i.e., metalla-aromatics. Because of the intrinsic nature of transition-metal orbitals, besides planar geometries, the most stable molecular structures of metalla-aromatic compounds could take nonplanar and even spiro geometries. In this Account, we outline several unprecedented types of metalla-aromatics developed recently in our research group.Around seven years ago, we found that 1,4-dilithio-1,3-butadienes, dilithio reagents with π-conjugation, could function as non-innocent ligands and react with low-valent transition-metal complexes, generating monocyclic metalla-aromatic compounds. Later on, by taking advantage of the unique behavior of dilithio reagents and the intrinsic nature of different transition metals, we have synthesized a series of metalla-aromatic compounds, of which four types are discussed here, and each of them represents the first of its kind. First, nearly planar aromatic dicupra[10]annulenes, a 10 π-electron aromatic system with two bridging Cu atoms participating in the orbital conjugation and electron delocalization, are synthesized by annulating two dilithio reagents with two Cu(I) complexes.Second, four kinds of spiro metalla-aromatics, featuring planar (with Pd, Pt, or Rh as the spiro atom) geometry with a whole 10π aromatic system, octahedral (tris-spiro metalla-aromatics with V as the spiro atom) geometry with an entire 40π Craig-Möbius aromatic system, tetrahedral (with Mn as the spiro atom) geometry having two independent and perpendicular 6π planar aromatic rings, and tetrahedral (with Mn as the spiro atom) geometry with one planar and one nonplanar 6π aromatic rings, respectively, are generated. In sharp contrast to spiroaromaticity with carbon acting as the spiro atom described in Organic Chemistry, the metal spiro atom herein takes part in orbital conjugation and electron delocalization.Third, nonplanar aromatic butadienyl diiron complexes are realized. Different from planar aromatic systems featuring delocalized π-type overlap, this nonplanar metalla-aromaticity is achieved by the novel σ-type overlap between the two Fe 3dxz orbitals and the butadienyl π orbital, forming a 6π aromatic system. Fourth, dinickelaferrocene, a ferrocene analogue with two aromatic nickeloles, is synthesized from our monocyclic aromatic dilithionickelole and FeBr2. The aromaticity of dinickelaferrocene and its nickelole ligands is realized by electron back-donation from the Fe 3d orbital to the π* orbital of nickeloles, which also deepens our understanding of the origin of aromaticity.The search for unprecedented and exciting aromatic systems, particularly with transition metals being involved, will continue to drive this intriguing research field forward. Given the synthetic strategies and various types of metalla-aromatics developed and described, diversified metalla-aromatics of interesting structures and reaction chemistry, novel chemical bonding modes, and useful functions can be expected.

From mononuclear iron phthalocyanines in catalysis to μ-nitrido diiron complexes and beyond

For a long time biomimetic oxidation catalysis was mainly associated with metal porphyrin complexes. Phthalocyanine complexes, also belonging to large family of macrocyclic complexes have been under-investigated as catalysts until recently. In this review, we present the development of phthalocyanine catalytic chemistry at IRCELYON with a topical focus on contributions from our group during last 20 years and discuss recent research directions from personal perspective. Catalytic chemistry of phthalocyanine complexes is a rapidly growing field including not only oxidations but also many other reactions. Recent discovery of remarkable catalytic properties of μ-nitrido diiron phthalocyanines will give a new impetus and should even accelerate this development. These binuclear N-bridged complexes emerge as promising bio-inspired catalysts, in particular, for challenging reactions such as a low temperature oxidation of methane and oxidative defluorination of heavily fluorinated aromatic compounds. The scope of their catalytic applications is constantly increasing. The bimetallic construction is flexible and has a significant potential for further development including implementation of different ligands, metals and bridging groups. Consequently, the properties of this scaffold can be fine-tuned by platform architecture thus providing novel tools for catalysis.

A Molecular Low-Coordinate [Fe-S-Fe] Unit in Three Oxidation States.

A [Fe‐S‐Fe] subunit with a single sulfide bridging two low‐coordinate iron ions is the supposed active site of the iron‐molybdenum co‐factor (FeMoco) of nitrogenase. Here we report a dinuclear monosulfido bridged diiron(II) complex with a similar complex geometry that can be oxidized stepwise to diiron(II/III) and diiron(III/III) complexes while retaining the [Fe‐S‐Fe] core. The series of complexes has been characterized crystallographically, and electronic structures have been studied using, inter alia, 57Fe Mössbauer spectroscopy and SQUID magnetometry. Further, cleavage of the [Fe‐S‐Fe] unit by CS2 is presented.

Computational and Experimental Investigations of the Fe2(μ-S2)/Fe2(μ-S)2 Equilibrium.

Density functional theory (DFT) calculations on Fe2S2(CO)6-2n(PMe3)2n for n = 0, 1, and 2 reveal that the most electron-rich derivatives (n = 2) exist as diferrous disulfides lacking an S-S bond. The thermal interconversion of the FeII2(S)2 and FeI2(S2) valence isomers is symmetry-forbidden. Related electron-rich diiron complexes [Fe2S2(CN)2(CO)4]2- of an uncertain structure are implicated in the biosynthesis of [FeFe]-hydrogenases. Several efforts to synthesize electron-rich derivatives of Fe2(μ-S2)(CO)6 (1) are described. First, salts of iron persulfido cyanides [Fe2(μ-S2)(CO)5(CN)]- and [Fe2(μ-S2)(CN)(CO)4(PPh3)]- were prepared by the reactions of NaN(tms)2 with 1 and Fe2(μ-S2)(CO)5(PPh3), respectively. Alternative approaches to electron-rich diiron disulfides targeted Fe2(μ-S2)(CO)4(diphosphine). Whereas the preparation of Fe2(μ-S2)(CO)4(dppbz) was straightforward, that of Fe2(μ-S2)(CO)4(dppv) required an indirect route involving the oxidation of Fe2(μ-SH)2(CO)4(dppv) (dppbz = C6H4-1,2-(PPh2)2, dppv = cis-C2H2(PPh2)2). DFT calculations indicate that the oxidation of Fe2(μ-SH)2(CO)4(dppv) produces singlet diferrous disulfide Fe2(μ-S)2(CO)4(dppv), which is sufficiently long-lived as to be trapped by ethylene. The reaction of 1 and dppv mainly afforded Fe2(μ-SCH=CHPPh2)(μ-SPPh2)(CO)5, implicating a S-centered reaction.

Iron‐Iron Bond Lengths and Bond Orders in Diiron Lantern‐Type Complexes with High Spin Ground States

AbstractDiiron paddlewheel‐ or lantern‐type complexes comprise an interesting subclass of binuclear iron complexes, existing with digonal, trigonal, and tetragonal ligand arrays. Experimentally known members show Fe−Fe bonds of lengths ranging from 2.13 to 2.73 Å, with Fe−Fe bond orders ranging from 0.5 to 2. Truncated models for 30 experimentally characterized diiron paddlewheel‐type complexes have been studied by DFT using the M06‐L functional, reproducing the Fe−Fe bond lengths quite well. In addition, we use DFT to treat three series of model diiron complexes Fe2Lx (x=2, 3, 4) in various low‐lying spin states, L being the unsubstituted formamidinate, guanidinate, and formate ligands (along with a series of axially ligated formate complexes) in order to predict ground state spin multiplicities, Fe−Fe bond lengths, and features of the ligand arrays. The ground states all have high spin multiplicities (septets, octets, and nonets). Formal bond order (fBO) values are suggested for the Fe−Fe bonds in these 61 complexes using an electron bookkeeping procedure, in addition to the Fe−Fe bond orders obtained by metal‐metal MO analysis for ground state species. Fe−Fe bond orders up to 3 are noted in some excited states. Deviations from D3h and D4h symmetry are noted for many trigonal and tetragonal complexes, being attributed to inherent Jahn‐Teller distortions. The formamidinate and guanidinate series show many similarities, while the formate series differs from these two in several aspects. From these results, ranges are derived for Fe−Fe bond lengths of orders 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0. The Fe−Fe bond length ranges for these non‐carbonyl lantern complexes are found to be appreciably lower than the corresponding ranges for diiron complexes with carbonyl ligands as compiled earlier from computational and experimental results.

Electronic and Structural Properties of the Double Cubane Iron-Sulfur Cluster

The double-cubane cluster (DCC) refers to an [Fe8S9] iron-sulfur complex that is otherwise only known to exist in nitrogenases. Containing a bridging µ2-S ligand, the DCC in the DCC-containing protein (DCCP) is covalently linked to the protein scaffold via six coordinating cysteine residues. In this study, the nature of spin coupling and the effect of spin states on the cluster’s geometry are investigated computationally. Using density functional theory (DFT) and a broken symmetry (BS) approach to study the electronic ground state of the system, we computed the exchange interaction between the spin-coupled spins of the four FeFe dimers contained in the DCC. This treatment yields results that are in excellent agreement with both computed and experimentally determined exchange parameters for analogously coupled di-iron complexes. Hybrid quantum mechanical (QM)/molecular mechanical (MM) geometry optimizations show that cubane cluster A closest to charged amino acid side chains (Arg312, Glu140, Lys146) is less compact than cluster B, indicating that electrons of the same spin in a charged environment seek maximum separation. Overall, this study provides the community with a fundamental reference for subsequent studies of DCCP, as well as for investigations of other [Fe8S9]-containing enzymes.