Digital Video Recording System Research Articles

Pre- and peri parturient behaviour as an indicator of onset of the calving process in Murrah buffalo (Bubalus bubalis)

Indicative behaviors of the precalving period were evaluated based on behavioral changes to predict the time of calving in dairy buffaloes to provide timely assistance in the delivery of calves. In the present study, the rumination time (min/6 h), standing time (min/h), lying bout (count/h), lying time (min/h), and tail raise (count/h) in parous advanced pregnant Murrah buffalo (n = 26) were evaluated using a continuous digital video recording system from − 96–24 h of calving. The data were retrieved retrospectively, grouped at 6 h intervals, and analyzed by a linear mixed model. The results revealed that the rumination time followed a similar trend from − 96 to − 12 h precalving; however, it decreased significantly during the last − 6 h precalving with a mean value of 127 ± 2.6 compared to 165 ± 3.1 at − 12 h. The standing time and lying time were comparable at all the precalving time points with respect to the hour of calving (P > 0.05). Lying bouts showed a plateau from − 96 to − 12 h precalving; however, a steep increase in the activity was recorded at − 6 to − 1 h of calving (9.5 ± 0.5). Tail raise activity was absent from − 96 to − 18 h precalving; however, it showed a markedly increased activity of 10.4 ± 0.8, which coincided with the initiation of the calving process. Overall, the present results revealed that the quantitative differences in the rumination time, lying bout and, interestingly, tail raise activity were the prominent calving-associated behaviors that occurred between − 6 to − 1 h of calving, and it is concluded that these behaviors showed the highest potential in predicting the onset of the calving process in Murrah buffaloes.

Development of 3-dimensional printed simulation surgical training models for endoscopic endonasal and transorbital surgery.

BackgroundEndoscopic skull base surgery (ESBS) is complex, requiring methodical and unremitting surgical training. Herein, we describe the development and evaluation of a novel three-dimensional (3D) printed simulation model for ESBS. We further validate the efficacy of this model as educational support in neurosurgical training.MethodsA patient-specific 3D printed simulation model using living human imaging data was established and evaluated in a task-based hands-on dissection program. Endoscopic endonasal and transorbital procedures were simulated on the model by neurosurgeons and otorhinolaryngology surgeons of varying experience. All procedures were recorded using a high-definition camera coupled with digital video recorder system. The participants were asked to complete a post-procedure questionnaire to validate the efficacy of the model.ResultsFourteen experts and 22 trainees participated in simulations, and the 32 participants completed the post-procedure survey. The anatomical realism was scored as 4.0/5.0. The participants rated the model as helpful in hand-eye coordination training (4.7/5.0) and improving surgical skills (4.6/5.0) for ESBS. All participants believed that the model was useful as educational support for trainees (4.7 [ ± 0.5]). However, the color (3.6/5.0) and soft tissue feedback parameters (2.8/5) scored low.ConclusionThis study shows that high-resolution 3D printed skull base models for ESBS can be generated with high anatomical accuracy and acceptable haptic feedback. The simulation program of ESBS using this model may be supplemental or provide an alternative training platform to cadaveric dissection.

Effect of in ovo injection of serotonin on the behavior and hormone level in laying hens

Feather pecking is a typically abnormal behavior that significantly impacts breeding efficiency and animal welfare in the egg production sector. Serotonin (5-HT) is essential for neuronal development and behavioral regulation. This study evaluated the effects of birds’ behavioral development (including feather pecking) and changes in serum hormones in chickens followed in ovo injection of 5-HT. On day 11, incubated eggs were injected with 5-HT at 0 (saline control), 5 ug (low) or 15 ug (high) (n = 166 per treatment). The hatched female chicks were raised under similar conditions up to 20 weeks of age (n = 60 per treatment). Birds’ behaviors were recorded using a digital video recording system. The time to first vocalize and first move, along with the duration of vocalization and escape attempts during the isolation test, during isolation test were analyzed on day 1, and week 4, 8, 12, 16 and 20. Blood samples were collected followed behavioral tests (n = 5/treatment). The expression of 5-HTR1A genes in the hypothalamus was measured by real-time PCR. Compared to controls, 5-HT administrated pullets had greater body weight (P < 0.05) with an improved feed conversion rate (P < 0.05) as well as higher serum concentrations of norepinephrine (NE) regardless of their doses. In addition, serum dopamine (DA) concentrations were lower in both high- and low-dose pullets at 8 and 12 weeks of age (P < 0.05). Also, a decrease in fearfulness response was observed based on the test to vocalize and duration of vocalization (P < 0.05). Further, this exhibited a lesser frequency of total aggressive behavior compared with the chicks in the control group, especially at 8 weeks of age (P < 0.05), where it is associated with elevated serum 5-HT concentration and upregulated hypothalamic expression of 5-HTR1A (P < 0.05). The changes of these hormone concentrations and gene expressions suggested that 5-HT accumulation in early embryonic stages may alter both the adrenergic and serotonergic systems, which could further regulate the isolation behavior and improve birds' growth performance to a certain extent.

Construct social-behavioral association network to study management impact on waterbirds community ecology using digital video recording cameras.

Studying social‐behavior and species associations in ecological communities is challenging because it is difficult to observe the interactions in the field. Animal behavior is especially difficult to observe when selection of habitat and activities are linked to energy costs of long‐distance movement. Migrating communities tend to be resource specific and prefer environments that offer more suitability for coexisting in a shared space and time. Given the recent advances in digital technologies, digital video recording systems are gaining popularity in wildlife research and management. We used digital video recording cameras to study social interactions and species–habitat linkages for wintering waterbirds communities in shared habitats. Examining over 8,640 hr of video footages, we built tetrapartite social‐behavioral association network of wintering waterbirds over habitat (n = 5) selection events in sites with distinct management regimes. We analyzed these networks to identify hub species and species role in activity persistence, and to explore the effects of hydrological regime on these network characteristics. Although the differences in network attributes were not significant at treatment level (p = .297) in terms of network composition and keystone species composition, our results indicated that network attributes were significantly different (p = .000, r 2 = .278) at habitat level. There were evidences suggesting that the habitat quality was better at the managed sites, where the formed networks had more species, more network nodes and edges, higher edge density, and stronger intra‐ and inter‐species interactions. In addition, we also calculated the species interaction preference scores (SIPS) and behavioral interaction preference scores (BIPS) of each network. The results showed that species synchronize activities in shared space for temporal niche partitioning in order to avoid or minimize any potential competition for shared space. Our social network analysis (SNA) approach is likely to provide a practical use for ecosystem management and biodiversity conservation.

RETRACTED ARTICLE: Investigation of automotive digital mirrors ergonomics through laser shadowgraphy and driver’s real-road test questionnaire

This paper studied the effect of replacing automotive reflection mirrors with digital mirrors (DM) on the driver’s safety and comfort. In this perspective, a new classification for DMs was proposed in appendance with a brief overview of driver’s visual ergonomics, associated with comparison and criticism of automotive DM design causality. Automotive laser shadowgraphy from car interior was performed to measure the obscuration in the driver’s direct field of view, due to the presence of DM displays at nine different obscuration positions. The driver’s off-road glances time toward DM displays was measured using a digital video recorder system. The eye glances of thirty drivers of different ages during different traffic conditions and their opinion about each display position through a simple questionnaire were statistically analyzed. Some pilot solutions were also proposed to reduce the expected drawbacks of such technology.

Endoscopic Transorbital Approach to the Cavernous Sinus Lateral Compartment (Anatomical Cadaver Study).

To determine whether the endoscopic transorbital (ETO) approach could be an alternative and a safer route to access the cavernous sinus (CS) lateral compartment. ETO technique was studied on 3 cadavers and 6 CSes of these cadavers. Endoscopic dissection was visualized with a 0-degree angle endoscope and recorded with fiberoptic cable, light source and camera system and digital video recording system. Superior orbital fissure (SOF), optic canal (OC), anterior ethmoidal artery (AEA) and posterior ethmoidal artery (PEA) foramens were visualized with periorbital dissection. Anterior wall of CS was reached after drilling the optic strut (OS). When the wall was opened, CS lateral and anteroinferior compartments were visualized. Internal carotid artery (ICA) were visualized from proximal ring to the last 2 cm of paraclival carotid artery. Cranial nerves (CNs) within the CS and the course of the interclinoid ligament were revealed. The transorbital endoscopic method is an alternative approach to other techniques for accessing the lateral and anteroinferior compartments of CS. The advantages, disadvantages and limitations of the technique have been determined.

Digital video recorder for Raspberry PI cameras with multi-camera synchronous acquisition

Video acquisition and analysis have become integral parts of scientific research. Two major components of a video acquisition system are the choice of camera and the acquisition software. A vast variety of cameras are available on the market. Turnkey multi-camera synchronous acquisition software, however, is not as widely available. For prototyping applications, the Raspberry Pi (RPi) has been widely utilized due to many factors, including cost. There are implementations for video acquisition and preview from a single RPi camera, including one implementation released by the RPi organization itself. However, there are no multi-camera acquisition solutions for the RPi. This paper presents an open-source digital video recorder (DVR) system for the popular RPi camera. The DVR is simple to setup and use for acquisition with a single camera or multiple cameras. In the case of multiple cameras, the acquisition is synchronized between cameras. The DVR comes with a graphical user interface (GUI) to allow previewing the camera streams, setting recording parameters, and associating “names” to cameras. The acquisition code as well as the DVR GUI are written in Python. The open-source software also includes a GUI for playback of recorded video. The versatility of the DVR is demonstrated with a life science research application involving high-throughput monitoring of fruit-flies.

Investigation of Successful Eyedrop Instillation Rates and Analysis of Drop Positions Using High-speed Digital Video Recording System

We investigated the success rates of eyedrop instillation and the distance between the cornea and the dropper tip in 100 volunteers using high-speed digital video recording. Past eyedrop adherence studies assumed that instillation occurred without failure. The ideal distance between the cornea and dropper tip remained unclear, although the general estimate was approximately 2.54 cm (1 inch). This study was approved by the Institutional Review Boards of all participating medical institutions, and all volunteers provided written, informed consent. Successful instillation was defined as when 1 drop fell accurately into the eye on the first attempt. The instillation of ≥2 drops or drops delivered outside the eye was considered a failure. The distance between the eye and dropper tip was measured using still images from a paused digital video camera and a digital ruler. Forty percent of the volunteers instilled eyedrops without instructions from ophthalmologists, pharmacists, or other healthcare workers. When the images were analyzed, the success rate of the first instillation was 70.1%. When the eye was arbitrarily divided into 9 sections, most of the drop sites were the iris or the center of the eye. The distance between the dropper tip and cornea was 2.62±1.75 (median 2.20) cm. These results indicate that the generally recommended distance is usually followed. The successful instillation rate based on the distance from the dropper tip to the cornea was 77% at 1.6±0.88 cm and 54.9% at 4.8±1.25 cm.

Off-Grid Downhole Video Recording System to Monitor Burrowing Owls

Studying species that nest underground, such as the Burrowing Owl (Athene cunicularia) is challenging. Ecological and behavioral information about Burrowing Owls is often limited to activities occurring aboveground or to insights gained from live viewing using downhole cameras and burrow scopes with limited recording capacity. Although automated monitoring systems may enhance underground observations, such systems need to be self-powered to support research conducted in remote areas. We describe a self-powered (off-grid) digital video recording system developed in 2014 to monitor nesting Burrowing Owls at Rio Bosque Wetlands Park in El Paso, Texas, USA. We used solar panels, infrared cameras, and digital video recorders to create a self-contained system for monitoring two artificial Burrowing Owl nest sites. From 2014 to 2018, we collected high-resolution video recordings of Burrowing Owl nesting ecology and behavior in their underground artificial burrows and nest boxes in remote areas. We provide detailed instructions and recommendations for the design, construction, installation, and maintenance of this system. Although our system required some initial material and labor costs, it required less on-site work than traditional behavioral observations, while also providing high-quality video images of an understudied aspect of Burrowing Owl ecology. Key ecological insight gained included nest initiation dates, clutch sizes, incubation dates, hatching sequences, prey items delivered to the nest, and predators of Burrowing Owls in the El Paso area. We encountered substantial technical problems but recommend the overall design of our system.

PSI-14 Relationships of neonatal beef calf vigor with metabolic status

Abstract The objective of this study was to evaluate the relationships of neonatal beef calf behavior with calf serum metabolites. Angus, Hereford and crossbred beef females (n = 36; age = 4.0 ± 1.74; BCS = 6.5 ± 1.04; primiparous =5, multiparous = 31; calving date = April 4, 2018) and their calves were monitored continuously from 0 to 4 h post-parturition using a digital video recording system from March to May 2018. Jugular blood samples were obtained from calves at 24 (24.4 ± 1.73) and 48 to 72 (54.7 ± 9.08) h postnatal to determine serum blood urea nitrogen (BUN), glucose, non-esterified fatty acids (NEFA), and total protein (TP). Video was analyzed for behavior latencies calculated from time of birth to time when calf shakes head, kneels, attempts to stand, stands, and suckles. Time to stand had a weak positive correlation (P = 0.03) with time to suckle. Time to shake head had a moderate positive correlation (P ≤ 0.04) with both time to attempt to stand and time to stand, but did not correlate (P = 0.99) with time to suckle. Dam parity (multiparous or primiparous) did not affect (P ≥ 0.20) calf vigor measures. Time to suckle had a moderate negative correlation (P ≤ 0.05) with both serum glucose and total protein at 24 and 72 h, however did not correlate (P ≥ 0.31) with BUN or NEFA serum concentrations. In conclusion, the initial calf vigor measures were poor predictors of time to suckle; however, time to stand may be a viable vigor measure used to predict calf suckling. Further analysis of immunoglobulin G concentrations in calf serum will be used to determine if these vigor measures have a relationship with passive immune transfer in beef calves.

PSI-15 Factors affecting circulating metabolites and postnatal growth in spring-born neonatal beef calves

Abstract The objective of this experiment was to evaluate relationships of dam parity and calf suckling within 4 h postnatal with neonatal circulating metabolite concentrations, neonatal environment, and postnatal growth. For the experiment, 36 Angus, Hereford, and crossbred dams (age = 4.0 ± 1.74; multiparous (n = 5) and primiparous (n = 31); BCS = 6.5 ± 1.04; average calving date = April 4, 2018) were used. Calves were observed using a digital video recording system for 4 h after birth to determine suckling success [S = suckled (n = 27) or NS = did not suckle (n = 5) ≤ 4 h]. Jugular blood samples were obtained from calves at 24 (24.4 ± 1.73) and 48 to 72 (54.7 ± 9.08) h of age to determine serum blood urea nitrogen (BUN), glucose, non-esterified fatty acids (NEFA), and total protein (TP). Postnatal growth measures were collected at 50.4 ± 13.6 d and 162 ± 19.7 d of age. Calf BW was greater (P ≤ 0.02) at 50 and 162 d of age and ADG (0 to 162 d) was greater (P = 0.04) for S than NS calves, however birth BW was not different (P = 0.69). Ambient temperature at parturition was colder (P = 0.03) for NS calves than S calves. Serum glucose at 24 and 72 h was greater (P ≤ 0.03) in S calves than NS calves, however NEFA, BUN, and TP were not affected (P ≥ 0.09) by suckling success at either sampling time. Dam parity had no effect (P ≥ 0.12) on calf circulating metabolites at 24 and 72 h postnatal. In conclusion, the success of beef calves to suckle within 4 h of birth is associated with greater circulating glucose, warmer ambient temperature at birth, and greater postnatal BW and ADG.

Anterior communicating artery division in the endoscopic endonasal translamina terminalis approach to the third ventricle: an anatomical feasibility study.

Endonasal endoscopic approaches (EEA) to the third ventricle are well described but generally use an infrachiasmatic route since the suprachiasmatic translamina terminalis corridor is blocked by the anterior communicating artery (AComA). The bifrontal basal interhemispheric translamina terminalis approach has been facilitated with transection of the AComA. The aim of the study is to describe the anatomical feasibility and limitations of the EEA translamina terminalis approach to the third ventricle augmented with AComA surgical ligation. Endoscopic dissections were performed on five cadaveric heads injected with colored latex using rod lens endoscopes attached to a high-definition camera and a digital video recorder system. A stepwise anatomical dissection of the endoscopic endonasal transtuberculum, transplanum, translamina terminalis approach to the third ventricle was performed. Measurements were performed before and after AComA elevation and transection using a millimeter flexible caliper. Multiple comparison statistical analysis revealed a statistically significant difference in vertical exposure between the control condition and after AComA elevation, between the control condition and after AComA division and between the AComA elevation and division (p < 0.05). The mean difference in exposed surgical area was statistically significant between the control and after AComA division and between elevation and AComA division (p < 0.01), whereas it was not statistically significant between the control condition and AComA elevation (NS). The anatomical feasibility of clipping and dividing the AComA through an EEA has been demonstrated in all the cadaveric specimens. The approach facilitates exposure of the suprachiasmatic optic recess within the third ventricle that may be a blind spot during an infrachiasmatic approach.

Estimating optimal observational sampling frequency of behaviors for cattle fed high- and low-forage diets

Video recordings of behavioral activities including eating, ruminating, drinking, standing, and lying were monitored to determine the minimum number of sampling days and sampling frequency required to obtain reliable estimates of these behaviors. Eight continental crossbred heifers, individually housed in a tie-stall barn with total mixed ration provided once per day, were divided by BW into two blocks and assigned to each of the two dietary treatments in a crossover design: high-forage diet (HF, forage:concentrate ratio 70:30) and low-forage diet (LF, forage:concentrate ratio 30:70). The cows were monitored continuously using a digital video recording system for 6 d in each of the two periods and a trained observer manually recorded the behavioral activities by minute. Mean time spent performing each behavior for 6 d with instantaneous samples of 1 min was compared with those obtained using fewer sampling days (1, 2, 3, 4, and 5 d) and less frequent scanning (2, 3, 4, 5, 10, 15, 30, and 60 min) using linear regression analysis, and the minimum number of sampling days or frequency was determined. Diet did not affect the accuracy and precision of predicting behavior from video recordings of the cows. When sampling days and scanning intervals were combined, the minimum recommended sampling frequency for accurately estimating a specific set of behaviors of beef heifers in tie stalls was: eating, 2 d with 4-min intervals; ruminating, 3 d with 4-min intervals; drinking, 2 d with 3-min intervals; and standing and lying, 2 d with 15-min intervals. Increasing sampling frequency beyond these minimums further enhanced the accuracy and precision of predictions. The total time of each behavioral activity was different between cows fed HF and LF diets with eating, ruminating, total chewing, and standing of heifers fed the HF diet greater (P < 0.01), but the lying (P < 0.01) and drinking time (P = 0.028) of heifers fed the LF diet greater. Meal patterns were different (P < 0.05) between the treatments except when meal size (kg) was expressed as DM or OM intake. For rumination patterns, the mean or maximum bout length (min/bout) was greater, but the maximum or minimum length of time heifers took to ruminate after eating was lower for the HF diet. From a practical standpoint, it is recommended to use 3 days of observations scanned at an interval of 4 min to reliably estimate the behavior of cows. If the focus is only lying and standing time, then 2 days with 15 min intervals can be used.

Application of video recording technology to improve husbandry and reproduction in the carmine bee-eater (Merops n. nubicus).

Incorporating technology with research is becoming increasingly important to enhance animal welfare in zoological settings. Video technology is used in the management of avian populations to facilitate efficient information collection on aspects of avian reproduction that are impractical or impossible to obtain through direct observation. Disney's Animal Kingdom(®) maintains a successful breeding colony of Northern carmine bee-eaters. This African species is a cavity nester, making their nesting behavior difficult to study and manage in an ex situ setting. After initial research focused on developing a suitable nesting environment, our goal was to continue developing methods to improve reproductive success and increase likelihood of chicks fledging. We installed infrared bullet cameras in five nest boxes and connected them to a digital video recording system, with data recorded continuously through the breeding season. We then scored and summarized nesting behaviors. Using remote video methods of observation provided much insight into the behavior of the birds in the colony's nest boxes. We observed aggression between birds during the egg-laying period, and therefore immediately removed all of the eggs for artificial incubation which completely eliminated egg breakage. We also used observations of adult feeding behavior to refine chick hand-rearing diet and practices. Although many video recording configurations have been summarized and evaluated in various reviews, we found success with the digital video recorder and infrared cameras described here. Applying emerging technologies to cavity nesting avian species is a necessary addition to improving management in and sustainability of zoo avian populations.

Evaluating the Quality of Cardiopulmonary Resuscitation in the Emergency Department by Real-Time Video Recording System.

ObjectivesTo compare cardiopulmonary resuscitation (CPR) quality between manual CPR and miniaturized chest compressor (MCC) CPR. To improve CPR quality through evaluating the quality of our clinical work of resuscitation by real-time video recording system.MethodsThe study was a retrospective observational study of adult patients who experienced CPR at the emergency department of Shanghai Tenth People’s Hospital from March 2013 to August 2014. All the performance of CPR were checked back by the record of “digital real-time video recording system”. Average chest compression rate, actual chest compression rate, the percentage of hands-off period, time lag from patient arrival to chest compression, time lag from patient arrival to manual ventilation, time lag from patient arrival to first IV establish were compared. Causes of chest compression hands-off time were also studied.Results112 cases of resuscitation attempts were obtained. Average chest compression rate was over 100 compression per minute (cpm) in the majority of cases. However, indicators such as percentage of hands-off periods, time lag from patient arrival to the first manual ventilation and time lag from patient arrival to the first IV establish seemed to be worse in the manual CPR group compared to MCC CPR group. The saving of operators change time seemed to counteract the time spent on MCC equipment. Indicators such as percentage of hands-off periods, time lag between patient arrival to the first chest compression, time lag between patient arrival to the first manual ventilation and time lag from patient arrival to the first IV establish may influence the survival.ConclusionOur CPR quality remained to be improved. MCC may have a potentially positive role in CPR.

Medical students do not adversely affect the quality of cardiopulmonary resuscitation for ED patients

Objective To investigate the effect of medical student involvement on the quality of actual cardiopulmonary resuscitation (CPR). Methods A digital video-recording system was used to record and analyze CPR procedures for adult patients from March 2011 to September 2012. Results Twenty-six student-involved and 40 non-student-involved cases were studied. The chest compression rate in the student-involved group was significantly higher than that in the non-student-involved group (P<0.01). The proportion of compressions atabove 110 cpmwas higher in the student-involved group (P=0.021), whereas the proportion at90~110 cpmwas lower in the student-involved group (P=0.015). The ratio of hands-off time to total manual compression time was significantly lower in the student-involved group than in the non-student-involved group (P<0.05). In contrast, the student-involved group delivered a higher ventilation rate compared with the non-student-involved group (P<0.05). The observed time delay to first compression and first ventilation was very similar between the groups. There were no significant differences between groups in either return of spontaneous circulation or time from survival to discharge. Conclusions Student-involved resuscitation teams were able to perform good CPR, with higher compression rates and fewer interruptions. However, the supervision from medical staff is still needed to ensure appropriate chest compression and ventilation rate in student-involved actual CPR in the emergency department. Key words: Students, medical; Cardiopulmonary resuscitation; Emergency treatment

Medical students do not adversely affect the quality of cardiopulmonary resuscitation for ED patients

ObjectivesTo investigate the effect of medical student involvement on the quality of actual cardiopulmonary resuscitation (CPR). MethodsA digital video-recording system was used to record and analyze CPR procedures for adult patients from March 2011 to September 2012. ResultsTwenty-six student-involved and 40 non–student-involved cases were studied. The chest compression rate in the student-involved group was significantly higher than that in the non–student-involved group (P < .001). The proportion of compressions at “above 110 cpm” was higher in the student-involved group (P = .021), whereas the proportion at “90-110 cpm” was lower in the student-involved group (P = .015). The ratio of hands-off time to total manual compression time was significantly lower in the student-involved group than in the non–student-involved group (P = .04). In contrast, the student-involved group delivered a higher ventilation rate compared with the non–student-involved group (P = .02). The observed time delay to first compression and first ventilation were very similar between the groups. There were no significant differences between the groups in either return of spontaneous circulation or time from survival to discharge. ConclusionStudent-involved resuscitation teams were able to perform good CPR, with higher compression rates and fewer interruptions. However, the supervision from medical staff is still needed to ensure appropriate chest compression and ventilation rate in student-involved actual CPR in the emergency department.

Design Issues in a Performance Monitor for Embedded Multi-core Systems

Multi-core processors have elevated the performance of software via true parallelization. However, this has also created new challenges. One serious issue is the bottleneck in system performance due to synchronization, cache misses, or resource starvation, which is hard to detect in application software with runtime changing behavior. Performance monitors are usually employed for such detection. Nevertheless, monitors have introduced their own computation and communication overheads, especially in embedded multi-core systems. In this work, we propose a multi-core performance monitor and evaluate the effects of monitor overheads on different types of tasks, such as CPU-bound and IO-bound tasks. Further, we give suggestions on the number of monitors and the type of monitor deployments for embedded multi-core applications. Besides trying to reduce monitor overheads, we also aim at the accuracy and the immediacy of the monitored information. Through a real-world example, namely digital video recording system, we demonstrate how different monitoring periods affect the tradeoff between the accuracy and the immediacy.

Multi-object tracking coprocessor for multi-channel embedded DVR systems

In this paper, the architecture of a video analytics coprocessor is proposed for multi-channel embedded digital video recorder (DVR) systems. A reference video analytics algorithm is proposed for multi-object tracking and is divided into independent processing steps based on data flow. Each step is designed in hardware or software considering its computational complexity and required system resources. Pixelwise processing requiring a large amount of computational resources, such as frame difference and background modeling, are designed as hardware with embedded direct memory access (DMA) controllers. A single-pass connected component labeling (CCL) is designed as a hardware targeting real-time processing of stream input. High-level tasks such as object filtering, frame-based control of hardware modules, and communication with an external host are designed with software on an embedded processor. Object tracking and event detection are designed with software on a host processor. Considering both the bandwidth required for frame processing and the bandwidth available by memory buses, the architecture of a 4-channel video analytics coprocessor is explored. It is finally implemented on a field-programmable gate arrays (FPGA) device, integrated into a conventional DVR system, and verified as to its functions and performance. It can provide video analysis functions to conventional DVR system-on-chip (SoC), and can lessen the cost of real-time video monitoring at remote monitoring centers.

70 및 120kHz에서 쥐노래미와 감성돔에 대한 음향 반사 강도의 체장 의존성

Black porgy and fat greenling are commercially important fish species due to the continuously increasing demand in Korea. When estimating acoustically the fish length by a fish sizing echo sounder, it is of crucial importance to know the target strength (TS) to length dependence. In relation to these needs, the target strength experiments for live fishes were conducted in an acrylic salt water tank using two split-beam echo sounders operating at 70 and 120kHz. The target strength under well-controlled laboratory conditions was simultaneously measured with the swimming movement by digital video recording (DVR) system and analyzed as a function of fish length (L) and frequency (or wavelength <TEX>${\lambda}$</TEX>). Equations of the form TS-alog (L)+blog (1)+c were derived for their TS-length dependence. The best fit regression of TS on fork length for black porgy was TS=20.62 log (L, m)-0.62 log (<TEX>${\lambda}$</TEX>, m)-30.68 (<TEX>$r^2$</TEX>=0.77). The best fit regression of TS on fork length for fat greenling was TS=12.06 log (L, m)-5.85 log (<TEX>${\lambda}$</TEX>, m)-22.15 (<TEX>$r^2$</TEX>=0.44).