Digital Imaging Software Research Articles

Analysis of land-use and livelihood transformations in peri-urban areas: Insights from North-Western Ghana

This paper questions claims that peri-urbanization perpetuates the shrinking of livelihood opportunities. A critical analysis of the peri-urbanization process presents a more nuanced transformation of livelihood opportunities. Drawing on concurrent triangulation mixed-method, primary data was sourced from non-farm workers using survey questionnaires, informant interviews, and observation from 225 respondents in a Ghanaian peri-urban community -Bamahu. Digital image software, Erdas Imaging 2015 and Landsat satellite were used to acquire land use and land cover data to affirm spatial differences. Quantitative data were analyzed using descriptive statistics complemented with thematic analysis for qualitative data. The findings showed significant land use and land cover alterations from 2000 to 2019. These changes resulted in the springing up of non-farm livelihoods that populated formal and informal non-farm opportunities. The analysis provides evidence that supports two key contributions to peri-urbanization and livelihood transformation debates. Empirically, it brings in-depth insights from original fieldwork data to highlight specific contextual realities by not only revealing the spatial alterations but also peering into how emerging non-farm livelihoods trade-off with existing farm-based livelihoods. Theoretically, it extends the debate by reframing peri-urbanization as a process of transforming livelihoods that thrive due to infrastructural development, new skills, and a ready market for goods and services. These findings have important implications for opening up a theorization of the peri-urbanization phenomenon. This paper concludes that the emergence of these livelihoods is crucial and should be adequately integrated into urban policies and plans to ensure inclusive cities.

Diagnosis of Hirschsprung disease by analyzing acetylcholinesterase staining using artificial intelligence.

Classical Hirschsprung disease (HD) is defined by the absence of ganglion cells in the rectosigmoid colon. The diagnosis is made from rectal biopsy, which reveals the aganglionosis and the presence of cholinergic hyperinnervation. However, depending on the method of rectal biopsy, the quality of the specimens and the related diagnostic accuracy varies substantially. To facilitate and objectify the diagnosis of HD, we investigated whether software-based identification of cholinergic hyperinnervation in digitalized histopathology slides is suitable for distinguishing healthy individuals from affected individuals. N = 190 samples of 112 patients who underwent open surgical rectal biopsy at our pediatric surgery center between 2009 and 2019 were included in this study. Acetylcholinesterase (AChE) stained slides of these samples were collected and digitalized via slide scanning and analyzed using two digital imaging software programs (HALO, QuPath). The AChE-positive staining area in the mucosal layers of the intestinal wall was determined. In the next step machine learning was employed to identify patterns of cholinergic hyperinnervation. The area of AChE-positive staining was greater in HD patients compared to healthy individuals (p < 0.0001). Artificial intelligence-based assessment of parasympathetic hyperinnervation identified HD with a high precision (area under the curve [AUC] 0.96). The accuracy of the prediction model increased when nonrectal samples were excluded (AUC 0.993). Software-assisted machine-learning analysis of AChE staining is suitable to improve the diagnostic accuracy of HD.

Accuracy of Digital Imaging Software to Predict Soft Tissue Changes during Orthodontic Treatment.

This study aimed to evaluate the accuracy of the Digital Imaging software in the prediction of soft tissue changes following three types of orthodontic interventions: non-extraction, extraction, and orthognathic surgery treatments. Ninety-six patients were randomly selected from the records of three orthodontic interventions (32 subjects per group): (1) non-extraction, (2) extraction, and (3) orthodontic treatment combined with orthognathic surgery. The cephalometric analysis of soft tissue changes in both the actual post-treatment and the predicted treatment was performed using Dolphin Imaging software version 11.9. A paired t-test was utilized to assess the statistically significant differences between the predicted and actual treatment outcomes of the parameters (p < 0.05). In the non-extraction group, prediction errors were exhibited only in the lower lip parameters. In the extraction group, prediction errors were observed in both the upper and lower lip parameters. In the orthognathic surgery group, prediction errors were identified in chin thickness, facial contour angle, and upper and lower lip parameters (p < 0.05). Digital Imaging software exhibited inaccurate soft tissue prediction of 0.3-1.0 mm in some parameters of all treatment groups, which should be considered regarding the application of Dolphin Imaging software in orthodontic treatment planning.

Biological activity and mechanism of action of Gotu kola oil in skin wound repair

Purpose: To investigate the biological activity and mechanism of action of Gotu Kola oil in skin wound repair. Methods: In this study, a total of 40 Sprague-Dawley (SD) rats were meticulously chosen to establish a skin wound model. The rats were randomly allocated to a study group, which received topical application of Gotu kola oil, and control group, which served as the model control. Each group consisted of 20 rats to ensure an adequate sample size. The wound area was measured using precise digital imaging software to quantitatively determine the rate of wound healing. Expression levels of hepatocyte growth factor (HGF), vascular endothelial growth factor (VEGF) and transforming growth factor-beta 1 (TGF-β1) were determined by quantitative reverse transcription-polymerase chain reaction (qRT-PCR) while the extent of microvassel regeneration at the wound site was determined by immunohistochemical method using CD34 as a marker. Results: The wound healing rate in the study group was higher than in the control group. In the study group, the transcription levels of HGF and VEGF were higher than in the control group on days 3, 7, and 14, while the transcription level of TGF-β1 was higher on days 7 and 14. Microvessel density (MVD) in the study group was higher than in the control group on days 3 and 7 (p &lt; 0.05). Conclusion: Gotu kola oil facilitates wound healing by promoting the generation of capillaries at the wound site. Harnessing this potential of Gotu kola oil may lead to the development of more efficacious treatment strategies for skin wound repair, ultimately enhancing the quality of life of the patients.

Management of Ocular Surface Inflammation with Persistent Epithelial Defects Using a Sutureless Human Amniotic Membrane Dehydrated Matrix: A Prospective Study Utilizing a Digital Ocular Surface Assessment Tool.

To report the outcomes of using a sutureless human amniotic membrane dehydrated matrix (HAMDM) in the management of a range of ocular surface conditions utilizing a digital ocular surface disease assessment tool. Two UK NHS Trusts - Queen Victoria Hospital Foundation Trust (East Grinstead and Maidstone) and Tunbridge Wells Trust (Kent) - prospectively treated patients with ocular surface disease with sutureless HAMDM. The patient cohort was assessed for resolution of epithelial defects, ocular surface inflammation, and best-corrected visual acuity pre- and posttreatment. Measurements of ocular surface inflammation and epithelial defect size were assessed using AOS digital imaging software, a validated tool for objective grading of bulbar conjunctival redness and measurement of corneal epithelial defects. A total of 47 applications of sutureless HAMDM on 46 eyes of 46 patients (25 male, 21 female, age 9-94 years) were assessed across various etiologies for an average of 24.0±14.1 days. Patients with limbal stem-cell deficiency (n=17), persistent epithelial defects (n=16), neurotrophic corneal disease (n=7), filamentary keratitis (n=2), corneal erosion (n=1), corneal thinning (n=1), ocular surface inflammation (n=1), and traumatic corneal laceration (n=1) were included in the study. Across all patents, 63% of eyes showed complete healing of epithelial defects and 32.6% of eyes showed partial resolution. The average rate of healing (wound closure) was 0.36 mm2 per day across the overall patient cohort, and the rate of healing in cases with complete resolution of epithelial defects was 0.41 mm2 per day. Inflammation across all four quadrants of the ocular surface remained stable. Visual acuity across the patient cohort remained stable (61%) and improved in 26% of patients (0.06±0.51 logMAR). Sutureless HAMDM application can be accomplished in just a few minutes and effectively treat a range of ocular surface disease in a clinical, nonsurgical setting. The AOS imaging software offered a quantitative methodology for measuring epithelial defect size and inflammation state.

Anatomy of the Naviculocuneiform Joint Complex.

The purpose of this study was to quantify the articular surfaces of the naviculocuneiform (NC) joint to help clinicians better understand common pathologies observed such as navicular stress fractures and arthrodesis nonunions. Twenty cadaver NC joints were dissected and the articular cartilage of the navicular, medial, middle, and lateral cuneiforms were quantified by calibrated digital imaging software. Statistical analysis included calculating the mean cartilage surface area dimensions of the distal navicular and proximal cuneiform bones. Length measurements on the navicular were obtained to estimate the geographic location of the interfacet ridges. Lastly, all facets of the articular surfaces were described in regard to the shape and location of cartilaginous or fibrous components. Results were compared using Student t tests. Navicular cartilage was present over 75.4% of the surface area of the proximal NC joint, compared with 72.6% of combined cuneiform cartilage distally. The mean height of the deepest (dorsal-plantar) measurement of navicular articular cartilage was 18 ± 3 mm. The mean heights of the distal medial, middle, and lateral cuneiform articular facets were 15 ± 1 mm, 17 ± 2 mm, and 15 ± 2 mm, respectively. There is significant variation among the articular surfaces of the NC joint. Additionally, the central third of the navicular was calculated to lie in the inter-facet ridge between the medial and middle articular facets of the navicular. Surgeons may consider this study data when performing joint preparation for NC arthrodesis as cartilage was present to a mean depth of 18 mm at the NC joint. Additionally, this study demonstrates that the central third of the navicular, where most navicular stress fractures occur, lies in the interfacet ridge between the medial and middle articular facets of the navicular.

Digital assessment of supracrestal tissue attachment and its correlation with dentogingival components.

The aim of this study is to measure, in vivo, the supracrestal tissue attachment dimensions (STADs) by means of a noninvasive digital method and to investigate the association between STADs and gingival thickness (GT), tooth position, tooth length, tooth width, keratinized tissue width (KTW), buccal bone thickness (BBT), and bone crest (BC) level. Nineteen periodontally healthy subjects who previously received full mouth periodontal charting, cone beam computed tomography, and intraoral scan for the purpose of implant planning were included in the study. A digital imaging software was used for the superimposition of Digital Imaging and Communications in Medicine and stereolithography files, along with hard and soft tissue measurements. Pearson's correlation and ANOVA statistical analyses were used to investigate potential trends between STADs and other dentogingival components. A total of 203 teeth were assessed, with an average STADs of 2.05mm (±0.99mm). STADs were larger in mandibular than maxillary teeth (p-value <0.001) and decreased from anterior to posterior teeth. STADs exhibited an inverse relationship with BBTs and GTs (p-value <0.001) and the KTW (p-value=0.05). Positive correlations were found between GT and BBT (p-value <0.001), whereas both were negatively correlated with the distance between the cementoenamel junction and BC (p-values 0.019 and 0.006, respectively) and positively correlated with KTW (p-value <0.001). This study highlighted the dynamic nature of STA relative to tooth position. Additionally, it explored the intricate relationships of STADs with various dentogingival components. To the best of the authors' knowledge, this study represents the first application of CBCTs, intraoral scans, and clinical probe depths for noninvasive supracrestal tissue attachment measurements. This study advocates for a personalized assessment of supracrestal attachments, incorporating tooth position and other dentogingival components. The study emphasizes the importance for practitioners to consider the specific patient gingival phenotypes during restorative or surgical planning to avoid adverse outcomes.

Safety of using a large femoral head on thin polyethylene for total hip arthroplasty based on different types of polyethylene

The use of a large femoral head in total hip arthroplasty (THA) to stabilize and reduce the incidence of dislocation is on the increase, but concerns arise when combining them with small acetabular components due to potential mechanical failures in thin polyethylene (PE) liners. A single-institution, retrospective cohort study was conducted on 116 patients with minimum 2-year follow-up who received 36-mm femoral heads and acetabular components ≤ 52 mm, using either remelted highly cross-linked polyethylene (remelted HXLPE) or vitamin E-infused HXLPE (VEPE). Osteolysis and implant loosening were not observed in either group. Although a fracture of the PE liner was observed in each group (1.7%), the clinical outcomes were excellent, as the mean modified Harris Hip Score (mHHS) at the last follow-up was 93.5. Moreover, the mean linear wear rates measured by digital imaging software in both groups were low, with 0.035 mm/y in remelted HXLPE and 0.030 mm/y in VEPE. In conclusion, The use of a large femoral head on a thin PE liner can be a viable treatment option in patients who need to prioritize stability; however, careful attention should be paid to mechanical fractures of the PE liner.

Radiographic Technique for Routine Clinical Measurement of Postoperative Total Knee Extension

Introduction: We propose a novel clinical technique to easily obtain a radiographic measurement for terminal passive knee extension based upon a weight-bearing lateral radiograph. Materials and Methods: Lateral radiographs were obtained with the patient in the standing position. The leg was positioned with slight hip flexion and full passive extension of the knee by instructing the patient to bear partial weight through their heel, with simultaneous use of a wooden wedge to dorsiflex the foot to neutral and to aid in balance. A Terminal extension was measured radiographically with digital imaging software. Fifty postoperative knee radiographs were used in assessing inter-observer and intra-observer reliability. Results: Inter-observer reliability yielded an Intraclass Correlation Coefficient of 0.973. The correlation coefficient for intra-observer reliability was 0.980. Conclusion: With the use of weight-bearing extension radiographs and our measurement technique, we present a method that can easily be applied across any setting in total knee arthroplasty to obtain accurate, objective data on patient knee extension.

Evaluation of Contact Area and Pressure After Malreduction in Isolated Medial Malleolar Fractures With 2 mm of Displacement: A Cadaveric Study

This study was performed to evaluate the changes in contact area and pressure in the tibiotalar joint, with a 2 mm displacement after IMMF(isolated medial malleolar fracture). Ten cadavers with pairs were used to establish a situation in which IMMF occurred during ankle injury. We performed IMMF corresponding to types C and D of the Herscovici classification, and it was displaced by 2 mm. The normal group was defined as a normal tibiotalar joint, the TF(transverse fracture) group as a 2 mm transverse displacement corresponding to the Herscovici classification type C, and the OF(oblique fracture) group as a 2 mm oblique displacement corresponding to the Herscovici classification type D. We measured the contact area and pressure at the tiobiotalar joint. The film was scanned and analyzed using the digital imaging software, Scion Image (Scion Crop. Frederick, MD). In normal group, the average contact area of the tibiotalar joint was 317 mm2 (IQR; interquartile range,256; 347) and 308 mm2 (IQR, 262; 364), average pressure was 2.19 N/mm2 (IQR, 1.94; 2.27) and 2.15 N/mm2 (IQR, 2.06; 2.53). In the TF and OF groups, the average contact area of the tibiotalar joint decreased by 9% and 12%, respectively, and the average pressure increased by 8% and 14%, respectively. There was no statistical difference in peak pressure between the normal, TF, and OF groups. In the case of transverse and oblique fractures, a 2 mm displacement showed significant changes in contact area and contact pressure compared to the normal tibiotalar joint, but there were no significant changes pertaining to type, between the two fractures. Level of Clinical Evidence: 5.

Soft tissue injury prediction using joint depression in computed tomography in AO 41B lateral tibial plateau fractures.

Tibial plateau fractures are usually associated with soft tissue injury. This study aimed to use the extent of joint depression and lateral widening in computed tomography (CT) to predict the soft tissue injury accompanying fractures.The study included 23 patients with type Arbeitsgemeinschaft für Osteosynthesefragen-classified 41B fractures. Demographics, mechanism of injury, age, gender, and injury sites were assessed. Post-traumatic radiography, magnetic resonance imaging (MRI), and CT were obtained. MRI evaluated the meniscal, cruciate, and collateral ligament injuries, and CT measured the extent of joint depression and lateral widening in millimeters using digital imaging software. The relationship between joint depression, lateral widening, and soft tissue injuries was statistically analyzed. Of the 23 patients, 17 (74%) were males and 6 (26%) were females. Lateral meniscus injuries increased and the risk of bucket handle lateral meniscus tears increased as the CT joint depression exceeded 12 mm (p < 0.05). Joint depression of <5.9 mm was associated with medial meniscus injury (p < 0.05). The mean distribution examination of all soft tissue injuries and joint depression revealed no statistically significant difference between the groups (p > 0.05). Increased joint depression in lateral tibial plateau fractures increases the risk of lateral meniscus bucket handle tear, and decreased joint depression increases the risk of medial meniscus injury. Accordingly implementing the treatment plan and patient management will improve the clinical outcomes.

Influence of inter-grain cementation stiffness on the effective elastic properties of porous Bentheim sandstone

Effective elastic properties of porous media are known to be significantly influenced by porosity. In this paper, we investigated the influence of another critical factor, the inter-grain cementation stiffness, on the effective elastic properties of a granular porous rock (Bentheim sandstone) using an advanced numerical workflow with realistic rock microstructure and a theoretical model. First, the disparity between the experimentally tested elastic properties of Bentheim sandstone and the effective elastic properties predicted by empirical equations was analysed. Then, a micro-computed tomography (CT)-scan based approach was implemented with digital imaging software AVIZO to construct the 3D (three-dimensional) realistic microstructure of Bentheim sandstone. The microstructural model was imported to a mechanics solver based on the 3D finite element model with inter-grain boundaries modelled by cohesive elements. Loading simulations were run to test the effective elastic properties for different shear and normal inter-grain cementation stiffness. Finally, a relation between the macroscale Young's modulus and inter-grain cementation stiffness was derived with a theoretical model which can also account for porosity explicitly. Both the numerical and theoretical results indicate the influence of the inter-grain cementation stiffness, on the effective elastic properties is significant for porous sandstone. The calibrated normal and shear stiffnesses at the inter-grain boundaries are 1.2 × 105 and 4 × 104 GPa/m, respectively.

Digital imaging software versus the "eyeball" method in quantifying steatosis in a liver biopsy.

Steatotic livers represent a potentially underutilized resource to increase the donor graft pool; however, 1 barrier to the increased utilization of such grafts is the heterogeneity in the definition and the measurement of macrovesicular steatosis (MaS). Digital imaging software (DIS) may better standardize definitions to study posttransplant outcomes. Using HALO, a DIS, we analyzed 63 liver biopsies, from 3 transplant centers, transplanted between 2016 and 2018, and compared macrovesicular steatosis percentage (%MaS) as estimated by transplant center, donor hospital, and DIS. We also quantified the relationship between DIS characteristics and posttransplant outcomes using log-linear regression for peak aspartate aminotransferase, peak alanine aminotransferase, and total bilirubin on postoperative day 7, as well as logistic regression for early allograft dysfunction. Transplant centers and donor hospitals overestimated %MaS compared with DIS, with better agreement at lower %MaS and less agreement for higher %MaS. No DIS analyzed liver biopsies were calculated to be >20% %MaS; however, 40% of liver biopsies read by transplant center pathologists were read to be >30%. Percent MaS read by HALO was positively associated with peak aspartate aminotransferase (regression coefficient= 1.04 1.08 1.12 , p <0.001), peak alanine aminotransferase (regression coefficient = 1.04 1.08 1.12 , p <0.001), and early allograft dysfunction (OR= 1.10 1.40 1.78 , p =0.006). There was no association between HALO %MaS and total bilirubin on postoperative day 7 (regression coefficient = 0.99 1.01 1.04 , p =0.3). DIS provides reproducible quantification of steatosis that could standardize MaS definitions and identify phenotypes associated with good clinical outcomes to increase the utilization of steatite livers.

Rapid Smartphone-based Image Reading for Assessing Quality of Active Pharmaceutical Ingredients of Commonly Prescribed Drugs-Lusaka Zambia

Third world countries suffer from supply of substandard therapeutic drugs and due to lack of robust quality testing facilities, many of these drugs find themselves in the dispensaries and various outlets for over the counter purchase. In order to ensure quality, simple yet informative tests are available and one of them is high performance thin layer chromatography. High Performance Thin Layer Chromatography (HPTLC) coupled with image acquisition by TLC software application on a smart phone and analysis by freeware Digitally enhanced Thin Layer Chromatography (DeTLC) respectively was performed using the minilab protocols for assessing quality of drugs dispensed at the University of Zambia clinic as well as drugs randomly bought from different pharmacies around Lusaka, Zambia. The quality of drugs was assessed by comparing retardation factors with standards and approximate percent active ingredient amounts were compared using the maximal K intensities derived by the DeTLC software for image analysis. Normalizing the spots to the 100% spot, mean values with respective standard deviations were : atenelol (85.6±0.5), ciprofloxacin (95.6±1.1), ketoconazole (78.2±1.1), mebendazole (95.5±1.1), nevirapine (96.7±1.1), penicillin v (100.5±1.1), quinine (92.9±1.1), rifampicin (99.3±0.7) and isoniazid (72.0±4.1). All the drugs tested were within the acceptable range of concentrations of the active pharmaceutical ingredient ( 0 to 5.3% Rf error). Thus, the simple robust HPTLC method coupled with simple to use digital imaging software provides a quick means to check on quality of the drugs dispensed.

Novel Robotic-Assisted Cryobiopsy for Peripheral Pulmonary Lesions

PurposeTissue acquisition in lung cancer is vital for multiple reasons. Primary reasons reported for molecular testing failure in lung cancer biopsy specimens include insufficient amount of tumor cells provided and inadequate tissue quality. Robotic bronchoscopy is a new tool enabling peripheral pulmonary lesion sampling; however, diagnostic yield remains imperfect possibly due to the location of nodules adjacent to or outside of the airway. The 1.1-mm cryoprobe is a novel diagnostic tool and accesses tissue in a 360-degree manner, thus potentially sampling eccentric/adjacent lesions. This study examines the diagnostic yield of the cryoprobe compared to standard needle aspiration and forceps biopsy. It additionally evaluates yield for molecular markers in cases of lung cancer.MethodsThis is a retrospective analysis of 112 patients with 120 peripheral pulmonary lesions biopsied via robotic bronchoscopy using needle aspirate, forceps, and cryobiopsy.ResultsThe overall diagnostic yield was 90%. Nearly 18% of diagnoses were made exclusively from the cryobiopsy sample. Molecular analysis was adequate on all cryobiopsy samples sent. Digital imaging software confirmed an increase in quantity and quality of samples taken via cryobiopsy compared to needle aspirate and traditional forceps biopsy.ConclusionUsing the 1.1-mm cryoprobe to biopsy PPN combined with the Ion robotic bronchoscopy system is safe, feasible, and provides more diagnostic tissue than needle aspirates or traditional forceps biopsies. The combination of cryobiopsy with robotic-assisted bronchoscopy increased diagnostic yield, likely due to its 360-degree tissue acquisition which is beneficial when targeting extraluminal lesions adjacent to the airway.

Ligament-Sparing Volar Radiocarpal Arthrotomy During Distal Radius Fracture Repair: Anatomical Description and Quantification of Articular Surface Area Visualized in a Cadaveric Model

Distal radius (DR) fracture repair using the volar locked plating technique typically involves indirect fracture reduction, assessed using fluoroscopy, without direct visualization of the articular surface. This method of fracture repair may be guided by the rationale that volar radiocarpal ligament disruption may cause radiocarpal instability, although direct articular visualization may facilitate improved fracture reduction. This study investigated anatomical feasibility and articular surface visualization using volar ligament-sparing radiocarpal arthrotomy pertinent to DR fracture repair. Ten fresh-frozen cadaveric specimens of the upper extremity underwent volar arthrotomy via the standard flexor carpi radialis approach with partial longitudinal sectioning of the long radiolunate and partial transverse sectioning of the short radiolunate ligaments to visualize the articular surface of the DR. Following arthrotomy, the visible surface of the DR was analyzed using digital photography. The wrist was disarticulated, and the fully exposed articular surface was photographed. The visible area of the articular surface was quantified using digital imaging software by calculating the ratio of the surface area visualized using the arthrotomy to the total articular surface area. The percentage of the articular surface area of the DR visualized using the volar arthrotomy was 76% ± 7.6% (range, 69%-90%), including both the scaphoid facet, lunate facet, and scapholunate ridge. Volar radiocarpal arthrotomy allows clinically relevant visualization of the articular surface of the DR, including the scaphoid and lunate facets. Radiocarpal arthrotomy may facilitate improved articular reduction during DR fracture repair via the volar approach.

Distance to the Neurovascular Bundle for Iliotibial Band Graft Passage During Anterior Cruciate Ligament Reconstruction: A Pediatric Cadaveric Study.

Background:The Micheli technique for anterior cruciate ligament (ACL) reconstruction (ACLR) has proven to be a reliable method with a minimal risk for growth disturbance among skeletally immature patients.Purposes:To evaluate the Micheli technique of iliotibial band (ITB) graft passage for ACLR using cadaveric knee models and to measure the distance between the surgical instrument tip and the neurovascular bundle in the posterior knee joint: specifically, the peroneal nerve, tibial nerve, and popliteal artery.Study Design:Descriptive laboratory study.Methods:Gross dissection was performed on 17 pediatric cadaveric knees (12 male and 5 female) aged between 4 and 12 years. To simulate ITB graft passage, we passed a curved-tip hemostat clamp through the posterior capsule, with the knee flexed from 90° to 100°. Next, clinical photographs were taken, and digital imaging software was used to measure the distance in centimeters from the clamp tip to each respective neurovascular structure.Results:The mean distances from the clamp tip to the tibial nerve, popliteal artery, and peroneal nerve were 0.875 cm (range, 0.468-1.737 cm), 0.968 cm (range, 0.312-1.819 cm), and 1.149 cm (range, 0.202-2.409 cm), respectively. Mean values were further calculated for age groups of ≤8, 9-10, and 11-12 years. The mean distance from the clamp tip to the peroneal nerve was 1.400 cm larger for 11- to 12-year-old specimens than for ≤8-year-old specimens (95% CI, 0.6-2.2 cm; P = .005).Conclusion:The neurovascular structures in the posterior knee were in close proximity to the path of graft passage, with distances <1 cm in many specimens in this study. When passing the graft through the knee for an over-the-top position, surgeons should consider these small distances between the path of graft passage and critical neurovascular structures.Clinical Relevance:As the incidence of ACL tears is continuously increasing within the pediatric population, there are a larger number of ACLR procedures being performed. Although neurovascular injuries during ACLR are rare, this study clarifies the close proximity of neurovascular structures during ITB graft passage using the Micheli technique of ACLR.

Articular Involvement With Retrograde Headless Compression Screw Fixation of the Metacarpal

Retrograde headless compression screw (RHCS) fixation for metacarpal fractures can lead to metacarpal head articular cartilage violation. This study aimed to quantify the articular surface loss after insertion of the RHCS and determine the functional range of motion (ROM) of the metacarpophalangeal (MCP) joint at the point of contact between the proximal phalangeal (P1) base and the articular defect. Ten fresh-frozen cadaveric hand specimens were analyzed for prefixation MCP joint ROM. After screw insertion, the ROM at which the dorsal portion of the P1 base begins to engage the screw tract defect, as well as the ROM at which the midsagittal portion of the P1 bisector engages the screw tract defect, was recorded. The distal axial articular surface of the metacarpal and the defects from screw insertion were measured using a digital image software program. Nine men and one woman (mean age, 69 years) were examined. The prefixation mean extension-flexion arc for all MCP joints ranged from 1° to 85°. After screw insertion, the mean MCP ROM at which the dorsal P1 articular surface first engaged the screw tract was 31°. Only 7 digits had screw tract engagement with the midsagittal bisector of the P1 base at a mean flexion angle of-18° (18° hyperextension). Mean articular surface violation increased from the index finger moving ulnarly, with an average of 3.9% involvement. Articular surface loss of the metacarpal head following RHCS insertion is negligible in a cadaveric model, with minimal engagement between the corresponding defect and the P1 base during functional ROM. Retrograde headless compression screw fixation of metacarpals inevitably damages the cartilage. However, the actual defect is small in proportion to the articular surface area and not engaged during functional activity. These biomechanical features maymitigate the surgeon's concern about joint destruction, while ensuring the benefits ofearly rehabilitation and minimal invasiveness of this technique.

Arthroscopic-Assisted Toggle Rod Stabilization in Canine Coxofemoral Luxation: A Cadaveric Study.

The aim of this study was to describe an arthroscopic-assisted technique for coxofemoral toggle rod placement, and to report on the feasibility, drill tunnel trajectory and accuracy of tunnel aperture location using this method. Cadaveric pilot study. Eight coxofemoral joints. Craniodorsal coxofemoral joint luxations were artificially created. A simulated open hip reduction and stabilization with a toggle rod were performed through a limited arthrotomy under arthroscopic guidance. Computed tomography scans were performed to evaluate drill hole trajectory across the femoral neck, and joints were disarticulated and photographed. Digital imaging software was used to determine the percent overlap of the drill hole apertures relative to the origin and insertion of the round ligament on the acetabulum and fovea. The exit point of the tunnel was entirely within the fovea capitis in five of eight femurs, three of eight femoral drill apertures were only partially within the target area. Of the eight acetabular bone tunnels examined, all were centred occupying the acetabular fossa. Coxofemoral toggle rod placement can be performed under arthroscopic guidance through a limited arthrotomy. Comparable femoral tunnel accuracy with the standard open technique should be achieved with the current method prior to its clinical use.

Translated article] Fracture planning is easy: Development of a basic method of digital planning based on the traditional pencil and paper technique

IntroductionPreoperative planning constitutes a fundamental tool in the management of fractures; however, its practical application is far from the desired, perhaps due to the absence of a basic and simple method, adapted to the current times. We describe a digital planning method, halfway the traditional and the technological, which preserves its educational essence, allows for the understanding of the fracture and the individualisation of the osteosynthesis. Material and methodsAfter the initial analysis of the fracture and the patient's characteristics, different measurements are made on X-ray and CT images with a digital medical imaging software. These images are then copied into a presentation programme (Microsoft® PowerPoint or Keynote ©Apple Inc.), in which the main fragments and fracture lines are traced with the computer pointer. These are subsequently moved into a reduced position and the implants for internal fixation are graphically represented together with a guide of the surgical strategy. ResultsWe show 4 cases of different types of fractures operated through reduction and osteosynthesis after preoperative planning according to the described method. The basic points for the surgical planning, logistics, tactics and postoperative radiological results of each case are detailed. ConclusionsDespite the rise of advanced planning software, traditional paper and pencil methods are still fundamental, even more so for the trauma surgeon in training. The digital planning method described is very appropriate for this purpose, as it combines the advantages of both methods: simplicity, accessibility, quickness, low cost, reproducibility, educational character, efficiency and possibility of simulation, corrections and reuse of cases.