Diffuse Growth Research Articles

Diffusion Growth and Mechanical Properties of Intermetallic Compounds in Mg–Pr System

Diffusion Growth and Mechanical Properties of Intermetallic Compounds in Mg–Pr System

Diffusion of Mobile Technologies in the Area of Financial and Insurance Activities in Poland

The diffusion of innovation in the area of banking and certain financial services is a topic eagerly taken up in empirical research, but in the case of Poland the study of this phenomenon in the area of finance and banking that utilizes the econometric models in question is practically non-existent. This article attempts to fill this research gap to some extent. The main objective of the article is to present a comparative analysis of the rate of mobile technologies diffusion among 3 groups of enterprises in the financial and insurance sectors: banking and lending, insurance and reinsurance, and brokerage and other activities. The occurrence of diffusion of mobile technologies and its rate was studied with the help of a logistic function. Results show that in companies operating in the insurance industry, the phase of rapid growth of mobile innovation diffusion lasted longer than in other groups of enterprises, but the highest dynamics of mobile innovation diffusion in the first phase of this phenomenon was achieved by companies conducting brokerage and other activities.

Effects of thermal, stress, and electric fields on microstructure and ion distribution of (Mg0.1Mn0.1Co0.1Ni0.2Ti0.1Cu0.1Zn0.2)Fe2.1O4 spinel ferrites

In this work, conventional sintering, hot-pressing sintering, and spark plasma sintering techniques were utilized to simulate the thermal field, thermal-stress field, and thermal-stress-electric field, respectively. The effects of these fields on the microstructure and cation distribution of the (Mg0.1Mn0.1Co0.1Ni0.2Ti0.1Cu0.1Zn0.2)Fe2.1O4 ferrite (HEF) material were comprehensively analyzed. The results indicate that in the temperature range of 1000–1100 °C, the thermal field provides the driving force for sintering, promotes grain growth (average particle size: 2→7 μm), and increases crystallinity degree. The stress field brings the particles into close contact with each other, facilitates diffusion, and delays grain growth (0.5→5 μm). The electric field reduces grain boundary energy, causes mass transfer, and makes the grains finer (0.5→0.7 μm) and more uniform. Mathematical model analysis reveals that the thermal field is beneficial to the random distribution of cations, which yields an inversion degree (γ) of about 2/3 and increases the configuration entropy of HEF. The stress field leads to lattice distortion, permits ions with larger radius to occupy tetrahedral positions, and changes the cell parameters and oxygen position parameter of HEF. Finally, the interaction between electric field and crystal charges increases the electrostatic field energy, which promotes the formation of positive spinel structure and maximizes the crystal field stability energy. X-ray photoelectron spectra, Raman spectra, and change in lattice constant confirm the rationality of the mathematical model, and can be used to establish the model of the crystal structure under field effects.

Identification and exploration of a new M2 macrophage marker MTLN in alveolar echinococcosis

The pathogen of alveolar echinococcosis (AE) is Echinococcus multilocularis (E. multilocularis), which has the characteristics of diffuse infiltration and growth and has a high mortality rate. At present, the role of macrophages in AE infection has attracted more and more attention, but the new biomarkers and polarization mechanisms of macrophages are rarely studied. In this study, CIBERSORT and WGCNA algorithms were used to establish a weighted gene co-expression network, and MTLN was identified as a biological marker of M2-type macrophages, which participated in energy metabolism of macrophages and mediated inflammatory response, but the role of MTLN in AE was not studied. In this study, liver tissue samples from AE patients were collected and immunofluorescence co-localization showed the relationship between MTLN and macrophage distribution. E. multilocularis infected mouse model was established to analyze the expression of MTLN, liver fibrosis, and inflammatory reaction after E. multilocularis infection. The cell experiment simulated the liver microenvironment of E. multilocularis infected human body and analyzed the expression of MTLN by QRT-PCR and western blot in vitro. The data showed that liver fibrosis occurred in AE patients, and MTLN was activated near the focus. After E. multilocularis infected mice, the expression of MTLN increased with time. In the cell experiment, after the antigen of E. multilocularis protoscolex stimulated normal liver cells, the expression of MTLN increased 48 h, at this time, M2 was up-regulated and M1 was down-regulated. Therefore, MTLN may be the key gene to regulate the polarization of M2 macrophages and cause fibrosis.

Understanding the high-temperature oxidation resistance of heat-resistant austenitic stainless steel with gradient nanostructure

The underlying high-temperature oxidation mechanisms of the heat-resistant austenitic stainless steel with gradient nanostructured surface layer is revealed through systematic analysis of the microstructure and composition. Nanoscale oxide grains and high-density grain boundaries promoted the formation of pronounced spinel oxides, which suppressed elemental diffusion and CrO3 volatilization. High level of residual stress in the GNS layer facilitated the formation of high-density precipitates at the oxide/matrix interface and grain boundaries, which hindered the growth of oxide scale and reactive elements diffusion. The enhanced high-temperature oxidation resistance resulted from the synergistic combination of spinel oxides, precipitates, and high-density grain boundaries.

The growth behavior and kinetics of intermetallic compounds in Cu–Al interface at 600°C–800 °C

Due to the low production cost and light weight, copper-clad aluminum conductors show great potential value in the field of power transmission, while the phase structure and organizational changes at the Cu–Al interface in high-temperature environments have a great impact on the electrical and mechanical properties. In this paper, Cu–Al diffusion couples are prepared to study the diffusion process, microstructure, and growth kinetics of intermetallic compounds (IMCs) in Cu–Al interface during heating from 600 °C to 800 °C, and the mechanical and electrical properties of Cu–Al diffusion couples are discussed. The results show that after heat treatment, IMC layers are formed at the Cu–Al interface and the Al-side is composed of CuAl and CuAl2, in which the CuAl phase transforms from long to thick dendrites with the increase of temperature, and finally grows into a “popcorn” form. The IMCs at the Cu–Al interface from the Cu side to the Al side are in the order of Cu3Al layer, Cu9Al4 layer, Cu3Al2 layer and CuAl layer, among which the Cu3Al2 layer is the thickest (168.42 μm at 700 °C), while the Cu3Al layer is the thinnest (37.32 μm at 700 °C). The kinetic calculations show that the diffusion layer grows up rapidly, which is caused by the generation of liquid-phase during the heating process, leading to the acceleration of the diffusion of Cu and Al. The kinetic factor of the Cu3Al2 layer is the largest (n = 0.69), causing the fastest growth rate of the Cu3Al2 layer, while the Cu3Al layer shows the largest activation energy for diffusion and the smallest diffusion rate (Q = 9.48 kJ/mol, D0 = 2.06 × 10−1 m2/s), therefore its growth rate is the slowest. Based on the thermodynamic calculations and the Cu–Al phase diagram, a growth mechanism of the Cu–Al interface is proposed, the formation sequence of IMCs at the Cu–Al interface is Cu9Al4, CuAl, Cu3Al2 and Cu3Al. The formation of IMCs layer at the Cu–Al interface leads to a significant increase in the hardness of Cu–Al samples (the hardness of the Cu3Al2 is 10 times higher than that of Cu) and an obvious decrease in electrical conductivity (the electrical resistivity of Cu–Al is 5 orders of magnitude higher than that of Cu), affecting its application in the electrical industry.

Myelin figures from microbial glycolipid biosurfactant amphiphiles

AbstractMyelin figures (MFs)—cylindrical lyotropic liquid crystalline structures consisting of concentric arrays of bilayers and aqueous media—arise from the hydration of the bulk lamellar phase of many common amphiphiles. Prior efforts have concentrated on the formation, structure, and dynamics of myelin produced by phosphatidylcholine (PC)‐based amphiphiles. Here, we study the myelinization of glycolipid microbial amphiphiles, commonly addressed as biosurfactants, produced through the process of fermentation. The hydration characteristics (and phase diagrams) of these biological amphiphiles are atypical (and thus their capacity to form myelin) because unlike typical amphiphiles, their molecular structure is characterized by two hydrophilic groups (sugar, carboxylic acid) on both ends with a hydrophobic moiety in the middle. We tested three different glycolipid molecules: C18:1 sophorolipids and single‐glucose C18:1 and C18:0 glucolipids, all in their nonacetylated acidic form. Neither sophorolipids (too soluble) nor C18:0 glucolipids (too insoluble) displayed myelin growth at room temperature (RT, 25°C). The glucolipid C18:1 (G‐C18:1), on the other hand, showed dense myelin growth at RT below pH 7.0. Examining their growth rates, we find that they display a linear (L, myelin length; t, time) growth rate, suggesting ballistic growth, distinctly different from the dependence, characterizing diffusive growth such as what occurs in more conventional phospholipids. These results offer some insight into lipidic mesophases arising from a previously unexplored class of amphiphiles with potential applications in the field of drug delivery.

A Thermodynamically Based Modified Cam‐Clay Model for Post‐Bifurcation Behavior of Deformation Bands

AbstractCompaction bands are a type of localized deformation that can occur as diffuse or discrete bands in porous rocks. While modeling of shear bands can replicate discrete and diffusive bands, numerical models of compaction have so far only been able to describe the formation of discrete compaction bands. In this study, we present a new thermodynamic approach to model compaction bands that is able to capture both discrete and diffuse compaction band growth. The approach is based on a reaction‐diffusion formalism that includes an additional entropy flux. This entropic velocity regularizes the solution, by introducing a characteristic diffusion length scale and controlling the mode change from discrete to diffusive post‐localisation growth. The approach is used to model compaction band growth in highly porous carbonates. The model can replicate the areas of material damage exhibiting reduced porosity which are often observed as nuclei for the growth of compaction bands in experiments. The model also has the versatility to predict the formation of diffuse compaction bands, which is a significant advance in the field of compaction band modeling. The method can potentially be used for investigating the effect of material heterogeneities on compaction band growth and is heuristic for developing new methodologies for forecasting compaction band formation.

Effect of Cooling Conditions on the Size and Morphology Evolution of MgAl2O4 Inclusions in Al‐Deoxidized Steel Coupling with Mg Treatment

The experiment of Al‐deoxidized steel coupling with Mg treatment is conducted under three cooling methods to observe the size and morphology of MgAl2O4. Most of MgAl2O4 in the water‐cooled steel are sphere or ellipsoid‐like shape, in the furnace‐cooled steel are cubic or octahedral‐like shape, and in the air‐cooled steel are irregular shape. The quantity of inclusions in the size of 1–3 μm increases with the increasing cooling rate, whereas the quantity of the other size decreases with the increasing cooling rate. The result shows that the changing of cooling methods has little effect on the critical size and the nucleation rate of MgAl2O4. The growth of MgAl2O4 is effected by diffusion, Ostwald, and collision growth, and the increasing cooling rate leads to the decreasing growth time. The size of MgAl2O4 is decided by the diffusion of Mg and the growth time of MgAl2O4. Four possible morphological transformation paths of MgAl2O4 in steel are found, and the shape of MgAl2O4 can evolve from sphere or ellipsoid to octahedron via truncated octahedron or cubic‐like shape. The final morphology of MgAl2O4 is controlled by the transformation path which has a close relationship with the cooling rate.

3D Foaming Printing Biomimetic Hierarchically Macro-Micronanoporous Hydrogels for Enhancing Cell Growth and Proliferation.

Hydrogel, recognized as a promising biomaterial for tissue engineering, possesses notable characteristics, including high water uptake, an interconnected porous structure, and excellent permeability. However, the intricate task of fabricating a hierarchically macro-micronanoporous structure, essential for providing adequate space for nutrient diffusion and cell growth within hydrogels, remains a formidable challenge. In response to these challenges, this study introduces a sustainable and straightforward three-dimensional (3D) foaming printing strategy to produce hierarchically macro-micronanoporous hydrogels (HPHs) without the utilization of porogens and post-etching process. This method entails the controlled generation of air bubbles within the hydrogels through the application of optimal mechanical stirring rates. Subsequent ultraviolet (UV) cross-linking serves to effectively stabilize the macropores within the HPHs. The resulting hierarchically macro-micronanoporous structures demonstrate a substantial improvement in the viability, adhesion, and proliferation of human umbilical vein endothelial cells (HUVECs) when incubated with the hydrogels. These findings present a significant advancement in the fabrication of hierarchically macro-micronanoporous hydrogels, with potential applications in the fields of tissue engineering and organoid development.

Plant periderm as a continuum in structural organisation: a tracheophyte-wide survey and hypotheses on evolution.

Periderm is a well-known structural feature with vital roles in protection of inner plant tissues and wound healing. Despite its importance to plant survival, knowledge of periderm occurrences outside the seed plants is limited and the evolutionary origins of periderm remain poorly explored. Here, we review the current knowledge of the taxonomic distribution of periderm in its two main forms - canonical periderm (periderm formed as a typical ontogenetic stage) and wound periderm (periderm produced as a self-repair mechanism) - with a focus on major plant lineages, living and extinct. We supplement the published occurrences with data based on our own observations and experiments. This updated body of data reveals that the distribution of wound periderm is more widespread taxonomically than previously recognized and some living and extinct groups are capable of producing wound periderm, despite canonical periderm being absent from their normal developmental program. A critical review of canonical and wound periderms in extant and fossil lineages indicates that not all periderms are created equal. Their organisation is widely variable and the differences can be characterised in terms of variations in three structural features: (i) the consistency in orientation of periclinal walls within individual files of periderm cells; (ii) the lateral coordination of periclinal walls between adjacent cell files; and (iii) whether a cambial layer and conspicuous layering of inward and outward derivatives can be distinguished. Using a new system of scoring periderm structure based on these criteria, we characterise the level of organisation of canonical and wound periderms in different lineages. Looking at periderms through the lens provided by their level of organisation reveals that the traditional image of periderm as a single generalised feature, is best viewed as a continuum of structural configurations that are all predicated by the same basic process (periclinal divisions), but can fall anywhere between very loosely organized (diffuse periclinal growth) to very tightly coordinated (organized periclinal growth). Overall, wound periderms in both seed plants and seed-free plants have lower degrees of organisation than canonical periderms, which may be due to their initiation in response to inherently disruptive traumatic events. Wound and canonical periderms of seed plants have higher degrees of organisation than those of seed-free plants, possibly due to co-option of the programs responsible for organizing their vascular cambial growth. Given the importance of wound periderm to plant survival, its widespread taxonomic distribution, and its early occurrence in the fossil record, we hypothesise that wound periderm may have had a single origin in euphyllophytes and canonical periderm may have originated separately in different lineages by co-option of the basic regulatory toolkit of wound periderm formation. In one evolutionary scenario, wound periderm regulators activated initially by tissue tearing due to tensional stresses elicited by woody growth underwent heterochronic change that switched their activation trigger from tissue tearing to the tensional stresses that precede it, with corresponding changes in the signalling that triggered the regulatory cascade of periderm development from tearing-induced signals to signalling induced by tension in cells.

Photomodulated phase-separation kinetics in block copolymer melts: a DPD simulation study

ABSTRACT We study phase-separation kinetics of symmetric diblock copolymer (BCP) melt in 3 d subjected to sequential light on/off cycles. The incompatible blocks of each BCP chain are connected by a photosensitive bond, which undergoes breakage during photo-illumination (on-cycle) and recombination during the off-cycle. We set a shorter fixed time limit for each on-cycles and focus on analysing how the much longer duration of the light off-cycles affects the segregation kinetics. We explore two scenarios for each off-cycle time variation: one with equal and another with increasing durations. For both cases, we determine the rate constants for bond formation and degradation reactions and assess their influence on the dynamical scaling functions and the growth scale of evolving morphologies. The average domain size typically exhibits diffusive growth ( R ( t ) ∼ t 1 / 3 ) for a couple of cycles in the beginning. However, the domain growth nearly freezes during the rest of the cycles, resulting in bicontinuous and nearly frozen isotropic morphologies.

Heating-induced release of trapped bubbles from dead-end pore throats filled with nonvolatile liquid

The release of trapped bubbles from dead-end pore throats filled with nonvolatile liquid has widespread applications in gas–liquid reactors, radiators, foam flooding, ceramic sintering, and droplet microcarriers. As conventional pressure-driven flow cannot induce the transport of bubbles in dead-end pores, this paper explores the possibility of using heating to control the release of bubbles from dead-end pore throats. Visualization experiments of the microfluidics within a dead-end pore throat structure are conducted to address the release process of bubbles during heating. An increase in temperature causes dissolved gas in the solution to be transferred to the bubble, which enhances the bubble pressure and enables the bubble to pass through the pore throat. We analyze the effects of the initial bubble radius and initial temperature on the critical temperature Tcr at which the bubble passes through the pore throat. A larger initial radius does not necessarily make it more difficult for the bubble to pass through the throat, but there is a critical radius above which any increase in radius produces a lower value of Tcr. A theoretical model considering diffusion mass transfer, capillary forces, and corner film flows is developed, and this model is found to be in good agreement with the experimental results. Finally, we obtain three dimensionless numbers that can be used to predict Tcr. Our work provides guidance for the effective regulation of diffusive growth and the heating-induced release of bubbles from dead-end pore throats.

The Role of Magnetic Resonance Imaging in the Preoperative Staging and Treatment of Invasive Lobular Carcinoma

IntroductionInvasive lobular carcinoma (ILC) is known for its diffuse growth pattern and its associated challenges in diagnosing. Magnetic resonance imaging (MRI) is the most accurate imaging modality and might aid in improving preoperative staging compared to full field digital mammography (FFDM) and ultrasound (US), however current literature is inconsistent. The aim of this paper is to evaluate the accuracy of MRI staging compared to FFDM/US and pathology results. MethodsIn this single-centre retrospective study, all patients diagnosed with ILC between 2014 and 2019 who underwent preoperative MRI were included. Specific parameters studied were: (1) the need for second-look targeted biopsies, (2) detection of new tumors (ie, contralateral or multifocal), (3) changes in cTNM-classification, and (4) impact on final treatment plan. Bland-Altman plots were used to compare the tumor sizes measured on MRI and FFDM/US with actual pathological tumor sizes. ResultsNinety-nine patients were included. After performing preoperative MRI, 9 (9.1%) multifocal tumors were diagnosed after additional biopsies. Contralateral tumors were detected twice (2.0%) and cN classification was upgraded in 7 cases (7.1%). Surgical treatment or neoadjuvant treatment plans were changed in 16 patients (16.1%). Compared to histopathological results, FFDM/US underestimated tumor size with a mean of 0.4 cm (Limit of agreement (LoA): -2.8 cm to 2.0 cm) whereas MRI overestimated tumor size with a mean of 0.6 cm (LoA: -1.9 cm to 3.0 cm). ConclusionsIn our study, mean differences in tumor size measurements using FFDM/US and MRI were comparable, with similar random errors. MRI correctly diagnosed multifocal and contralateral tumors more often and provided a better cN staging.

Mathematical analysis of a time-fractional coupled tumour model using Laplace and finite Fourier transforms

A time-fractional diffusive tumour growth model is investigated in this paper. The model assumes two different tumour populations having diverse diffusion and proliferation rates. The classical integer model, coupled with the fractional operators with power-law, Mittag-Leffler and exponential kernels is solved analytically with the help of integral transforms Numerical investigations of the resulting solution are carried out to examine the effect of the different fractional operators. The spherical form of the model is considered, as this describes the tumour more adequately as compared to other coordinates system. From the numerical experiments, it is observed that, the kernel contained in the respective fractional operator could alter the dynamics of the tumour concentration under consideration.

Fulminant hemorrhagic course of a thalamic H3 K27-altered diffuse midline glioma in an adult patient: illustrative case.

H3 K27-altered diffuse midline gliomas (DMGs) are rare tumors, which are, regardless of their histological appearance, classified as World Health Organization grade 4 tumors. They are characterized by a diffuse growth pattern, midline anatomical location, and poor prognosis. Although DMGs occur predominantly in childhood, these tumors can also be found in young adults. The authors present a case of a 29-year-old patient who was found unconscious with a Glasgow Coma Scale score of 4, along with abnormal extensor movements and bilateral middilated nonreactive pupils. Computed tomography revealed obstructive hydrocephalus due to an acute hemorrhage in a right thalamic lesion. To drain the hydrocephalus and relieve the ongoing central herniation, emergent placement of a right-sided, and later a left-sided, extraventricular drain was performed. Despite the postoperative resolution of hydrocephalus, the patient died shortly after because of the central brain herniation that had occurred. Brain autopsy revealed a H3 K27-altered DMG in the right thalamus. Although typically described in the pediatric population and located in the pons, H3 K27-altered DMG should also be considered in young adult patients with midline lesions, particularly if they are located in the thalamus or brainstem. In rare cases, H3 K27-altered DMG may present with an acute tumor-related hemorrhage, leading to a fulminant clinical course.

"Hemispheric pilocytic astrocytoma" revisited: A comprehensive clinicopathological and molecular series emphasizing their overlap with other glioneuronal tumors.

Pilocytic astrocytomas (PA) typically exhibit distinct clinical, radiological, histopathological, and genetic features. DNA-methylation profiling distinguishes PA according to their location (infratentorial, midline, hemispheric, or spinal). In the hemispheric location, distinguishing PA from glioneuronal tumors remains a common diagnostic challenge for neuropathologists. Furthermore, the current version of the DKFZ classifier seems to have difficulty separating them from gangliogliomas. In this study, after central radiological review, we identified a histopathologically defined set of PA (histPA, n = 11) and a cohort of DNA-methylation defined PA (mcPA, n = 11). Nine out of the 11 histPA matched the methylation class of hemispheric PA, whereas 2 cases were classified at the end of the study as dysembryoplastic neuroepithelial tumors. Similarly, the mcPA cohort contained tumors mainly classified as PA (7/11), but 4 cases were classified as glioneuronal. The analysis of the 16 tumors with an integrated diagnosis of PA revealed that they affect mainly children with a wide spectrum of radiological, histopathological (i.e. a predominantly diffuse growth pattern), and genetic characteristics (large range of mitogen-activated protein kinase alterations). Based on these results, we consider hemispheric PA to be different from their counterparts in other locations and to overlap with other glioneuronal tumors, reinforcing the necessity of interpreting all data to obtain an accurate diagnosis.

5-ALA localises to the autophagy compartment and increases its fluorescence upon autophagy enhancement through caloric restriction and spermidine treatment in human glioblastoma

Glioblastoma Multiforme (GBM) is the most invasive and prevalent Central Nervous System (CNS) malignancy. It is characterised by diffuse infiltrative growth and metabolic dysregulation that impairs the extent of surgical resection (EoR), contributing to its poor prognosis. 5-Aminolevulinic acid (5-ALA) fluorescence-guided surgical resection (FGR) takes advantage of the preferential generation of 5-ALA-derived fluorescence signal in glioma cells, thereby improving visualisation and enhancing the EoR. However, despite 5-ALA FGR is a widely used technique in the surgical management of malignant gliomas, the infiltrative tumour margins usually show only vague or no visible fluorescence and thus a significant amount of residual tumour tissue may hence remain in the resection cavity, subsequently driving tumour recurrence. To investigate the molecular mechanisms that govern the preferential accumulation of 5-ALA in glioma cells, we investigated the precise subcellular localisation of 5-ALA signal using Correlative Light and Electron Microscopy (CLEM) and colocalisation analyses in U118MG glioma cells. Our results revealed strong 5-ALA signal localisation in the autophagy compartment – specifically autolysosomes and lysosomes. Flow cytometry was employed to investigate whether autophagy enhancement through spermidine treatment (SPD) or nutrient deprivation/caloric restriction (CR) would enhance 5-ALA fluorescence signal generation. Indeed, SPD, CR and a combination of SPD/CR treatment significantly increased 5-ALA signal intensity, with a most robust increase in signal intensity observed in the combination treatment of SPD/CR. When using 3-D glioma spheroids to assess the effect of 5-ALA on cellular ultrastructure, we demonstrate that 5-ALA exposure leads to cytoplasmic disruption, vacuolarisation and large-scale mitophagy induction. These findings not only suggest a critical role for the autophagy compartment in 5-ALA engagement and signal generation but also point towards a novel and practically feasible approach to enhance 5-ALA fluorescence signal intensity. The findings may highlight that indeed autophagy control may serve as a promising avenue to promote an improved resection and GBM prognosis.

Follicular lymphoma with a predominantly diffuse growth pattern with 1p36 deletion: a clinicopathologic analysis of eight cases

Objective: To investigate the clinical and pathologic features and diagnosis of follicular lymphoma (FL) with a predominantly diffuse growth pattern (DFL) with 1p36 deletion. Methods: Eight cases of DFL with 1p36 deletion diagnosed at Department of Pathology, Beijing Friendship Hospital, Capital Medical University (n=5) and the Affiliated Cancer Hospital of Zhengzhou University, Henan Cancer Hospital (n=3) from January 2017 to January 2023 were included. Their clinicopathologic features and follow-up data were analyzed. Immunohistochemistry and fluorescence in situ hybridization (FISH) were performed. Results: There were five males and three females, with a median age of 67 years, and inguinal lymphadenopathy was found as the main symptom. Histologically, similar morphologic features were sheared among all cases, with effaced nodal structure and characterized by proliferation of centrocytes in a diffuse pattern, with or without follicular components. The germinal center-related markers such as CD10 and/or bcl-6 were expressed in the tumor cells, and 1p36 deletion but not bcl-2 translocation was appreciable in these cases. Conclusions: DFL with 1p36 deletion is a rare subtype of FL, with some overlaps with other types of FL or indolent B-cell lymphomas in their pathologic features. An accurate diagnosis requires comprehensive considerations based on their clinical, pathologic, immunohistochemical, and molecular features.

Magnetic resonance imaging-guided intracranial resection of glioblastoma tumors in patient-derived orthotopic xenografts leads to clinically relevant tumor recurrence

BackgroundPreclinical in vivo cancer models are essential tools for investigating tumor progression and response to treatment prior to clinical trials. Although treatment modalities are regularly assessed in mice upon tumor growth in vivo, surgical resection remains challenging, particularly in the orthotopic site. Here, we report a successful surgical resection of glioblastoma (GBM) in patient-derived orthotopic xenografts (PDOXs).MethodsWe derived a cohort of 46 GBM PDOX models that faithfully recapitulate human disease in mice. We assessed the detection and quantification of intracranial tumors using magnetic resonance imaging (MRI).To evaluate feasibility of surgical resection in PDOXs, we selected two models representing histopathological features of GBM tumors, including diffuse growth into the mouse brain. Surgical resection in the mouse brains was performed based on MRI-guided coordinates. Survival study followed by MRI and immunohistochemistry-based evaluation of recurrent tumors allowed for assessment of clinically relevant parameters.ResultsWe demonstrate the utility of MRI for the noninvasive assessment of in vivo tumor growth, preoperative programming of resection coordinates and follow-up of tumor recurrence. We report tumor detection by MRI in 90% of GBM PDOX models (36/40), of which 55% (22/40) can be reliably quantified during tumor growth. We show that a surgical resection protocol in mice carrying diffuse primary GBM tumors in the brain leads to clinically relevant outcomes. Similar to neurosurgery in patients, we achieved a near total to complete extent of tumor resection, and mice with resected tumors presented significantly increased survival. The remaining unresected GBM cells that invaded the normal mouse brain prior to surgery regrew tumors with similar histopathological features and tumor microenvironments to the primary tumors.ConclusionsOur data positions GBM PDOXs developed in mouse brains as a valuable preclinical model for conducting therapeutic studies that involve surgical tumor resection. The high detectability of tumors by MRI across a substantial number of PDOX models in mice will allow for scalability of our approach toward specific tumor types for efficacy studies in precision medicine-oriented approaches. Additionally, these models hold promise for the development of enhanced image-guided surgery protocols.