Difficult Peptide Research Articles

Robust Chemical Synthesis of "Difficult Peptides" via 2-Hydroxyphenol-pseudoproline (ψ2-hydroxyphenolpro) Modifications.

The challenging preparation of "difficult peptides" has always hindered the development of peptide-active pharmaceutical ingredients. Pseudoproline (ψpro) building blocks have been proven effective and powerful tools for the synthesis of "difficult peptides". In this paper, we efficiently prepared a set of novel 2-(oxazolidin-2-yl)phenol compounds as proline surrogates (2-hydroxyphenol-pseudoprolines, ψ2-hydroxyphenolpro) and applied it in the synthesis of many well-known "difficult peptides", including human thymosin α1, amylin, and β-amyloid (1-42) (Aβ42).

Topochemistry for Difficult Peptide-Polymer Synthesis: Single-Crystal-to-Single-Crystal Synthesis of an Isoleucine-Based Polymer, a Hydrophobic Coating Material.

Polymers of hydrophobic amino acids are predicted to be potential coating materials for the creation of hydrophobic surfaces. The oligopeptides of hydrophobic amino acids are called "difficult peptides"; as the name suggests, it is difficult to synthesize them by conventional methods. We circumvented this synthetic challenge by adopting topochemical azide-alkyne cycloaddition (TAAC) polymerization of a hydrophobic dipeptide monomer. We designed an Ile-based dipeptide, decorated with azide and alkyne, which arrange in the crystal in a head-to-tail fashion with the azide and alkyne of the adjacent molecules in a ready-to-react orientation. The monomer, on mild heating of its crystals, undergoes regiospecific TAAC polymerization to yield a 1,4-disubstituted-triazole-linked polymer in a single-crystal-to-single-crystal fashion. The solid obtained after evaporation of the monomer solution also maintained crystallinity and underwent regiospecific topochemical polymerization as in the case of crystals. This topochemical polymerization could be studied using different techniques such as FTIR, NMR, DSC, GPC, MALDI, PXRD, and SCXRD. Since the polymer is insoluble in common solvents and hence difficult to coat surfaces, the monomer was first sprayed and evaporated on various surfaces and polymerized on the surface. Such polymer-coated surfaces exhibited water contact angles of up to 134°, showing that this Ile-derived polymer is very hydrophobic and can potentially be used as a coating material for various applications.

A cysteine-specific solubilizing tag strategy enables efficient chemical protein synthesis of difficult targets.

We developed a new cysteine-specific solubilizing tag strategy via a cysteine-conjugated succinimide. This solubilizing tag remains stable under common native chemical ligation conditions and can be efficiently removed with palladium-based catalysts. Utilizing this approach, we synthesized two proteins containing notably difficult peptide segments: interleukin-2 (IL-2) and insulin. This IL-2 chemical synthesis represents the simplest and most efficient approach to date, which is enabled by the cysteine-specific solubilizing tag to synthesize and ligate long peptide segments. Additionally, we synthesized a T8P insulin variant, previously identified in an infant with neonatal diabetes. We show that T8P insulin exhibits reduced bioactivity (a 30-fold decrease compared to standard insulin), potentially contributing to the onset of diabetes in these patients. In summary, our work provides an efficient tool to synthesize challenging proteins and opens new avenues for exploring research directions in understanding their biological functions.

N,O‐Benzylidene Acetal Dipeptides (NBDs) Enable the Synthesis of Difficult Peptides via a Kinked Backbone Strategy

AbstractProteins with highly hydrophobic regions or aggregation‐prone sequences are typically difficult targets for chemical synthesis at the current stage, as obtaining such type of peptides via solid‐phase peptide synthesis requires sophisticated operations. Herein, we report N,O‐benzylidene acetal dipeptides (NBDs) as robust and effective building blocks to allow the direct synthesis of difficult peptides and proteins via a kinked backbone strategy. The effectiveness and easy accessibility of NBDs have been well demonstrated in our chemical syntheses of various challenging peptides and proteins, including chemokine, therapeutic hormones, histone, and glycosylated erythropoietin.

Incorporation of pseudoproline monomer (Fmoc-Thr[ψMe,Mepro]–OH) facilitates efficient solid-phase synthesis of difficult peptides

Solid-Phase Peptide Synthesis (SPPS) is a convenient and efficient method by which to prepare peptides. However, the sequences of compounds classified as “difficult” show aggregation of growing peptide chains and their synthesis is extremely challenging by stepwise SPPS. In this context, the concourse of pseudoproline derivatives helps to break the aggregation and facilitates the synthesis. Although pseudoproline moieties are traditionally incorporated as dipeptides, the possibility of using only the monomer adds flexibility to the synthesis. Herein, the introduction of the most hindered β-branched Thr[ψMe,Mepro] derivative is studied in terms of how difficult is its acylation is by the following amino acid and the impact of its use on the final purity of two well-known ”difficult peptides”.

Water-Based Solid-Phase Peptide Synthesis without Hydroxy Side Chain Protection.

The development of protecting group-free synthesis has come to the forefront this century, as there is an increasing need to switch to greener synthetic methods. In peptide synthesis, a strategy of maximum protection offers the most efficient synthetic pathway, but minimal side chain protection is more favorable in terms of green chemistry. Here, we describe solid-phase peptide synthesis (SPPS) without hydroxy side chain protection based on an aqueous microwave (MW)-assisted method. First, we investigated the extent of O-acylation of the hydroxy side chain of Ser, Thr, and Tyr occurring in our method, which uses 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride. Under aqueous MW-assisted conditions, the coupling reaction proceeded efficiently without substantial O-acylation. Next, we applied the aqueous synthetic protocol without hydroxy side chain protection to synthesis of a laminin-related peptide, H-Tyr-Ile-Gly-Ser-Arg-NH2. HPLC analysis of the crude peptide revealed a single peak, suggesting the absence of side reactions including O-acylation and racemization. We also succeeded in synthesizing a difficult peptide sequence, acyl carrier protein (65-74) peptide, by aqueous SPPS without hydroxy or carboxamide side chain protection. Based on the eighth criterion of the 12 principles of green chemistry, namely, "reduce derivatives", our approach without hydroxy side chain protection will provide a greener peptide synthesis.

Solid-Phase Peptide Synthesis Using a Four-Dimensional (Safety-Catch) Protecting Group Scheme.

Peptides of importance to both academia and industry are mostly synthesized in the solid-phase mode using a two-dimensional scheme. The so-called Fmoc/tBu strategy, where the groups are removed by piperidine and TFA, respectively, is currently the method of choice for peptide synthesis. However, as the molecular diversity of cyclic and branched peptides becomes a challenging interest, a high level of orthogonal dimensionality is required, such as through triorthogonal protection schemes. Here we present a fourth category of orthogonal protecting groups that are stable under cleavage conditions, including the TFA treatment that removes the tBu-based groups. At the end of the synthetic process and upon some chemical manipulation, the groups in this fourth category were removed with TFA. This new concept of protecting groups could facilitate the synthesis and manipulation of difficult peptides.

The CSY-protecting group in the microwave-assisted synthesis of aggregation-prone peptides

This report describes the application of cyanosulfurylide (CSY)-protected aspartatic acid building blocks in microwave-assisted synthesis of aggregation-prone protein domains. We present a synthesis of Fmoc-Asp(CSY)-OH on a multigram scale, as well as procedures for the microwave-assisted synthesis of CSY-protected peptides, and CSY cleavage in partially folded or aggregation-prone peptides.

Easy Production of "Difficult Peptides" Using Cell-Free Protein Synthesis and a New Methionine Analogue as a Latent Peptide Cleavage Site.

Aliphatic γ-chloro-α-amino acids incorporated in place of their canonical analogues through cell-free protein synthesis act as heat-labile linkers, offering a useful strategy for the straightforward production of target peptides as fusion proteins, from which the targets are readily released. Until now, the natural abundance of aliphatic amino acids in peptides has limited the scope of the method, as it leads to undesired cleavage sites in synthesized products, but here the authors report the development of a new cleavable chloro amino acid that incorporates in place of the relatively rare amino acid methionine, thus greatly expanding the scope of producible targets. This new strategy is employed for simplified peptide synthesis with a methionine-free fusion partner, allowing single-site incorporation of the cleavable linker for clean release and easy purification of the target peptide. Its utility is demonstrated through the straightforward preparation of two peptides reported to be challenging targets and not accessible through standard solid-phase chemical methodologies, as well as analogues.

Gram‐Scale Synthesis of a Hexapeptide by Fragment Coupling in a Ball Mill

AbstractSynthesis of long peptides is generally considered as a challenge to peptide chemists, in addition to producing significant amounts of toxic waste, such as DMF. Here we show that using solvent‐less methods, such as ball milling, enabled the production of the hexapeptide Boc‐(Ala‐Phe‐Gly)2‐OBn at the gram scale with high overall yield (77 %, 5 linear steps). This is the longest peptide chain synthesized in a ball mill to date, in which the amino acid sequence is precisely controlled. This study complements the current fundamental knowledge required to synthesize longer and more difficult peptide chains (or small proteins) by using peptide fragment couplings in a ball mill.

Allenone-Mediated Racemization/Epimerization-Free Peptide Bond Formation and Its Application in Peptide Synthesis.

Allenone has been identified as a highly effective peptide coupling reagent for the first time. The peptide bond was formed with an α-carbonyl vinyl ester as the key intermediate, the formation and subsequent aminolysis of which proceed spontaneously in a racemization-/epimerization-free manner. The allenone coupling reagent not only is effective for the synthesis of simple amides and dipeptides but is also amenable to peptide fragment condensation and solid-phase peptide synthesis (SPPS). The robustness of the allenone-mediated peptide bond formation was showcased incisively by the synthesis of carfilzomib, which involved a rare racemization-/epimerization-free N to C peptide elongation strategy. Furthermore, the successful synthesis of the model difficult peptide ACP (65-74) on a solid support suggested that this method was compatible with SPPS. This method combines the advantages of conventional active esters and coupling reagents, while overcoming the disadvantages of both strategies. Thus, this allenone-mediated peptide bond formation strategy represents a disruptive innovation in peptide synthesis.

Silylated Tag-Assisted Peptide Synthesis: Continuous One-Pot Elongation for the Production of Difficult Peptides under Environmentally Friendly Conditions.

Addition of the silylated tag (STag) enables peptides to be highly soluble in CPME, allowing them to be used at high concentrations in a coupling reaction to enhance reactivity and achieve effective synthesis of sterically hindered peptides. We described the development of a continuous one-pot STag-assisted peptide synthesis platform as a method that provides near-stoichiometric, speedy, environmentally friendly, and scalable peptide synthesis.

Adaptable antigen matrix platforms for peptide vaccination strategies and T cell-mediated anti-tumor immunity

Injection of antigenic peptides has been widely used as a vaccine strategy to boost T cell immunity. However, the poor immunogenicity of single peptides can potentially be strengthened through modification of the tertiary structure and the selection of the accompanying adjuvant. Here, we generated antigenic peptides into non-linear trimers by solid phase peptide synthesis, thereby enhancing antigen presentation by dendritic cells to CD8+ T cells in vitro and in vivo. CD8+ T cells from mice vaccinated with trimers showed an KLRG1+ effector phenotype and were able to recognize and kill antigen-expressing tumor cells ex vivo. Importantly, trimers outperformed synthetic long peptide in terms of T cell response even when equal number of epitopes were used for immunization. To improve the synthesis of trimers containing difficult peptide sequences, we developed a novel small molecule that functions as conjugation platform for synthetic long peptides. This platform , termed Antigen MAtriX (AMAX) improved yield, purity and solubility of trimers over conventional solid phase synthesis strategies. AMAX outperformed synthetic long peptides in terms of both CD8+ and CD4+ T cell responses and allowed functionalization with DC-SIGN-binding carbohydrates for in vivo dendritic cell targeting strategies, boosting T cell responses even further. Moreover, we show that agonistic CD40 antibody combined with MF59 (AddaVax) emulsion synergistically improves the antigen-specific T cell response of the AMAX in vivo. Also, tumor-associated antigens and neo-antigens could be incorporated in AMAX for tumor-specific CD8+ T cell responses. Importantly, immunization with a mix of neoantigen AMAX could reduce tumor growth in a pre-clinical syngeneic mouse model. Hence, we provide pre-clinical support for the induction of effector CD8+ T cells through the adaptable AMAX platform as easy implementable peptidic vaccination strategy against any antigen of choice, including neoantigens for anti-tumor immunity.

Synthesis of O-Acyl Isopeptides: Stepwise and Convergent Solid-Phase Synthesis.

The O-acyl isopeptide method was developed for the preparation of difficult sequence-containing peptides, whose hydrophobic nature hampers both peptide chain construction on resin and purification with HPLC after deprotection. In the O-acyl isopeptide method, the target peptide is synthesized in an O-acyl isopeptide form, which contains an O-acyl isopeptide bond instead of the native N-acyl peptide bond at a hydroxy group-containing amino acid residue, such as Ser or Thr. The hydrophilic O-acyl isopeptide can be isolated, e.g., as a lyophilized TFA salt. The target peptide can be quantitatively obtained by a final O-to-N intramolecular acyl migration reaction with exposure to neutral conditions. Additionally, the O-acyl isopeptide is important as a hydrophilic precursor peptide for biological peptide assays that are difficult to handle. This chapter describes the synthesis of such O-acyl isopeptides by stepwise and convergent Fmoc solid-phase peptide synthesis.

Engineering of chimeric peptides as antagonists for the G protein-coupled receptor, RXFP4

Insulin-like peptide 5 (INSL5) is a very important pharma target for treating human conditions such as anorexia and diabetes. However, INSL5 with two chains and three disulfide bridges is an extremely difficult peptide to assemble by chemical or recombinant means. In a recent study, we were able to engineer a simplified INSL5 analogue 13 which is a relaxin family peptide receptor 4 (RXFP4)-specific agonist. To date, however, no RXFP4-specific antagonist (peptide or small molecule) has been reported in the literature. The focus of this study was to utilize the non-specific RXFP3/RXFP4 antagonist ΔR3/I5 as a template to rationally design an RXFP4 specific antagonist. Unexpectedly, we demonstrated that ΔR3/I5 exhibited partial agonism at RXFP4 when expressed in CHO cells which is associated with only partial antagonism of INSL5 analogue activation. In an attempt to improve RXFP4 specificity and antagonist activity we designed and chemically synthesized a series of analogues of ΔR3/I5. While all the chimeric analogues still demonstrated partial agonism at RXFP4, one peptide (Analogue 17) exhibited significantly improved RXFP4 specificity. Importantly, analogue 17 has a simplified structure which is more amenable to chemical synthesis. Therefore, analogue 17 is an ideal template for further development into a specific high affinity RXFP4 antagonist which will be an important tool to probe the physiological role of RXFP4/INSL5 axis.

Lithium chloride: An efficient additive for the synthesis of α-conotoxin PnIA(A10L) in the Fmoc solid phase strategy

PnIA(A10L) is a potential molecule for the diagnosis and treatment of α7 nAChR related disease, but its preparation is often limited by the efficiency of standard Fmoc solid phase peptide synthesis (SPPS). In this work, we proved that the chaperone salt LiCl was an effective additive to improve the synthesis efficiency of PnIA(A10L) by using Fmoc/tBu SPPS. Firstly, we screened an appropriate Fmoc deprotection reagent 2-methylpiperidine for PnIA(A10L) synthesis using LiCl. Secondly, the positive promotion of LiCl in amino acid condensation and Fmoc deprotection was confirmed in the synthesis of PnIA(A10L). Finally, the effect of dosage of LiCl on the synthesis efficiency of PnIA(A10L) suggested when the dosage of LiCl was less than 4 equivalent (equiv.) the resin loading, LiCl could significantly improve the synthesis efficiency, and the 2 equiv. was optimal dosage. The optimized addition of LiCl method reported here will provide a simple and practical strategy for the synthesis of PnIA(A10L) and promote the application of LiCl in difficult peptide synthesis.

Synthesis of hydrophobic insulin-based peptides using a helping hand strategy.

The introduction of solid-phase peptide synthesis in the 1960s improved the chemical synthesis of both the A- and B-chains of insulin and insulin analogs. However, the subsequent elaboration of the synthetic peptides to generate active hormones continues to be difficult and complex due in part to the hydrophobicity of the A-chain. Over the past decade, several groups have developed different methods to enhance A-chain solubility. Two of the most popular methods are use of isoacyl dipeptides, and the attachment of an A-chain C-terminal pentalysine tag with a base-labile 4-hydroxymethylbenzoic acid linker. These methods have proven effective but can be limited in scope depending on the peptide sequence of a specific insulin. Herein we describe an auxiliary approach to enhance the solubility of insulin-based peptides by incorporating a tri-lysine tag attached to a cleavable Fmoc-Ddae-OH linker. Incorporation of this linker, or "helping hand", on the N-terminus greatly improved the solubility of chicken insulin A-chain, which is analogous to human insulin, and allowed for coupling of the insulin A- and B-chain via directed disulfide bond formation. After formation of the insulin heterodimer, the linker and tag could be easily removed using a hydrazine buffer (pH 7.5) to obtain an overall 12.6% yield based on A-chain. This strategy offers an efficient method to enhance the solubility of hydrophobic insulin-based peptides as well as other traditionally difficult peptides.

A rink-amide soluble support: high purity conotoxins and other peptides accessed with minimal reagents

The use of peptides as therapeutics has been growing due to their biocompatibility. Solid phase peptide synthesis typically used to access these peptides requires excess reagents and/or microwave irradiation to drive reactions to completion because the reaction medium is heterogeneous. Reported herein is a soluble polynorbornene support containing rink amide attached sites for synthesizing oligopeptides and conotoxins in high purity using only 1.2 to 2 equivalents of coupling reagents. The support can be isolated as a precipitate from the reaction medium by adding ether. The loading capacity of the support can be easily determined by spectroscopy and can also be tuned by varying the monomer ratio. This support is promising for accessing peptides as the methodology uses minimal reagents and by-products can be easily separated.

Chemical synthesis of Shiga toxin subunit B using a next-generation traceless "helping hand" solubilizing tag.

The application of solid-phase peptide synthesis and native chemical ligation in chemical protein synthesis (CPS) has enabled access to synthetic proteins that cannot be produced recombinantly, such as site-specific post-translationally modified or mirror-image proteins (D-proteins). However, CPS is commonly hampered by aggregation and insolubility of peptide segments and assembly intermediates. Installation of a solubilizing tag consisting of basic Lys or Arg amino acids can overcome these issues. Through the introduction of a traceless cleavable linker, the solubilizing tag can be selectively removed to generate native peptide. Here we describe the synthesis of a next-generation amine-reactive linker N-Fmoc-2-(7-amino-1-hydroxyheptylidene)-5,5-dimethylcyclohexane-1,3-dione (Fmoc-Ddap-OH) that can be used to selectively introduce semi-permanent solubilizing tags ("helping hands") onto Lys side chains of difficult peptides. This linker has improved stability compared to its predecessor, a property that can increase yields for multi-step syntheses with longer handling times. We also introduce a new linker cleavage protocol using hydroxylamine that greatly accelerates removal of the linker. The utility of this linker in CPS was demonstrated by the preparation of the synthetically challenging Shiga toxin subunit B (StxB) protein. This robust and easy-to-use linker is a valuable addition to the CPS toolbox for the production of challenging synthetic proteins.

Automatic procedures for the synthesis of difficult peptides using oxyma as activating reagent: A comparative study on the use of bases and on different deprotection and agitation conditions

Solid-Phase Peptide Synthesis (SPPS) is a rapid and efficient methodology for the chemical synthesis of peptides and small proteins. However, the assembly of peptide sequences classified as “difficult” poses severe synthetic problems in SPPS for the occurrence of extensive aggregation of growing peptide chains which often leads to synthesis failure. In this framework, we have investigated the impact of different synthetic procedures on the yield and final purity of three well-known “difficult peptides” prepared using oxyma as additive for the coupling steps. In particular, we have comparatively investigated the use of piperidine and morpholine/DBU as deprotection reagents, the addition of DIPEA, collidine and N-methylmorpholine as bases to the coupling reagent. Moreover, the effect of different agitation modalities during the acylation reactions has been investigated. Data obtained represent a step forward in optimizing strategies for the synthesis of “difficult peptides”.