Differential Evolution Extreme Learning Machine Research Articles

An Optimized Algorithm for Renewable Energy Forecasting Based on Machine Learning

The large-scale application of renewable energy power generation technology brings new challenges to the operation of traditional power grids and energy management on the load side. Microgrid can effectively solve this problem by using its regulation and flexibility, and is considered to be an ideal platform. The traditional method of computing total transfer capability is difficult due to the central integration of wind farms. As a result, the differential evolution extreme learning machine is offered as a data mining approach for extracting operating rules for the total transfer capability of tie-lines in wind-integrated power systems. K-medoids clustering under the two-dimensional “wind power-load consumption” feature space is used to define representative operational scenarios initially. Then, using stochastic sampling and repetitive power flow, a knowledge base for total transfer capability operating rule mining is created. Then, a novel method is used to filter redundant characteristics and find features that are closely associated to the total transfer capability in order to decrease the ultra-high dimensionality of operational features. Finally, by feeding the training data into the proposed algorithm, the total transfer capability operation rules are derived from the knowledge base. It can be seen that, the proposed algorithm can optimize the system performance with good accuracy and generality, according to numerical data.

Driver Fatigue Detection via Differential Evolution Extreme Learning Machine Technique

Fatigue driving (FD) is one of the main causes of traffic accidents. Traditionally, machine learning technologies such as back propagation neural network (BPNN) and support vector machine (SVM) are popularly used for fatigue driving detection. However, the BPNN exhibits slow convergence speed and many adjustable parameters, while it is difficult to train large-scale samples in the SVM. In this paper, we develop extreme learning machine (ELM)-based FD detection method to avoid the above disadvantages. Further, since the randomness of the weight and biases between the input layer and the hidden layer of the ELM will influence its generalization performance, we further apply a differential evolution ELM (DE-ELM) method to the analysis of the driver’s respiration and heartbeat signals, which can effectively judge the driver fatigue state. Moreover, not only will the Doppler radar and smart bracelet be used to obtain the driver respiration and heartbeat signals, but also the sample database required for the experiment will be established through extensive signal collections. Experimental results show that the DE-ELM has a better performance on driver’s fatigue level detection than the traditional ELM and SVM.

Numerical Modeling of Suspension Force for Bearingless Flywheel Machine Based on Differential Evolution Extreme Learning Machine

The analytical model (AM) of suspension force in a bearingless flywheel machine has model mismatch problems due to magnetic saturation and rotor eccentricity. A numerical modeling method based on the differential evolution (DE) extreme learning machine (ELM) is proposed in this paper. The representative input and output sample set are obtained by finite-element analysis (FEA) and principal component analysis (PCA), and the numerical model of suspension force is obtained by training ELM. Additionally, the DE algorithm is employed to optimize the ELM parameters to improve the model accuracy. Finally, absolute error (AE) and root mean squared error (RMSE) are introduced as evaluation indexes to conduct comparative analyses with other commonly-used machine learning algorithms, such as k-Nearest Neighbor (KNN), the back propagation (BP) algorithm, and support vector machines (SVMs). The results show that, compared with the above algorithm, the proposed method has smaller fitting and prediction errors; the RMSE value is just 22.88% of KNN, 39.90% of BP, and 58.37% of SVM, which verifies the effectiveness and validity of the proposed numerical modeling method.

Research on Adaptive Reaction Null Space Planning and Control Strategy Based on VFF–RLS and SSADE–ELM algorithm for Free-Floating Space Robot

With the increase of on-orbit maintenance and support requirements, the application of a space manipulator is becoming more promising. In actual operation, the strong coupling of the free-floating space robot itself and the unknown disturbance of the contact target caused a major challenge to the robot base posture control. Traditional Reaction Null Space (RNS) motion planning and control methods require the construction of precise dynamic models, which is impossible in reality. In order to solve this problem, this paper proposes a new Adaptive Reaction Null Space (ARNS) path planning and control strategy for the contact of free-floating space robots with unknown targets. The ARNS path planning strategy is constructed by the Variable Forgetting Factor Recursive Least Squares (VFF–RLS) algorithm. At the same time, a robust adaptive control strategy based on the Strategy Self-Adaption Differential Evolution–Extreme Learning Machine (SSADE–ELM) algorithm is proposed to track the dynamic changes of the planned path. The algorithm enables us to intelligently learn and compensate for the unknown disturbance. Then, this paper constructs a robust controller to compensate model uncertainty. A striking feature of the proposed strategy is that it does not require an accurate system model or any information about unknown attributes. This design can dynamically implement RNS path tracking performance. Finally, through simulation and experiment, the proposed algorithm is compared with the existing methods to prove its effectiveness and superiority.

Research on the Adaptive Control in Sugar Evaporative Crystallization Using LSSVM and SaDE-ELM

Abstract The process of sugar evaporative crystallization is a nonlinear process with large time lag and strong coupling. It is difficult to establish a reasonable mechanism model. In this paper, we use the data driving modeling method to establish an Adaptive Control model for batch boiling sugar crystallization process. First, by analyzing the main influencing factors of the evaporative crystallization process of intermittent boiling sugar, the most important two parameters, brix and liquid level, are selected as the control object. The self-adaptive differential evolution Extreme Learning Machine (SaDE-ELM) is used to construct the control model. A least squares support vector machine (LSSVM) is established and connected in the control loop to control the opening of the feed valve so that to control the feed flowrate according to the objective values of syrup Brix and liquid level. Experiments are conducted and the obtained data are used to train and verify the learning machines. Experiments indicate that the learning machines are able to realize adaptive control to key parameters of the crystallization process. Comparison of different neural networks indicates that the LSSVM performs better than BP, RBF and ELM and SaDE-ELM with prediction error of below 0.01, and training time of below 0.05 s.

HEART RATE VARIABILITY CLASSIFICATION USING SADE-ELM CLASSIFIER WITH BAT FEATURE SELECTION

The electrical activity of the human heart is measured by the vital bio medical signal called ECG. This electrocardiogram is employed as a crucial source to gather the diagnostic information of a patient's cardiopathy. The monitoring function of cardiac disease is diagnosed by documenting and handling the electrocardiogram (ECG) impulses. In the recent years many research has been done and developing an enhanced method to identify the risk in the patient's body condition by processing and analysing the ECG signal. This analysis of the signal helps to find the cardiac abnormalities, arrhythmias, and many other heart problems. ECG signal is processed to detect the variability in heart rhythm; heart rate variability is calculated based on the time interval between heart beats. Heart Rate Variability HRV is measured by the variation in the beat to beat interval. The Heart rate Variability (HRV) is an essential aspect to diagnose the properties of the heart. Recent development enhances the potential with the aid of non-linear metrics in reference point with feature selection. In this paper, the fundamental elements are taken from the ECG signal for feature selection process where Bat algorithm is employed for feature selection to predict the best feature and presented to the classifier for accurate classification. The popular machine learning algorithm ELM is taken for classification, integrated with evolutionary algorithm named Self- Adaptive Differential Evolution Extreme Learning Machine SADEELM to improve the reliability of classification. It combines Effective Fuzzy Kohonen clustering network (EFKCN) to be able to increase the accuracy of the effect for HRV transmission classification. Hence, it is observed that the experiment carried out unveils that the precision is improved by the SADE-ELM method and concurrently optimizes the computation time.

Classification of breast masses in ultrasound images using self-adaptive differential evolution extreme learning machine and rough set feature selection.

A method using rough set feature selection and extreme learning machine (ELM) whose learning strategy and hidden node parameters are optimized by self-adaptive differential evolution (SaDE) algorithm for classification of breast masses is investigated. A pathologically proven database of 140 breast ultrasound images, including 80 benign and 60 malignant, is used for this study. A fast nonlocal means algorithm is applied for speckle noise removal, and multiresolution analysis of undecimated discrete wavelet transform is used for accurate segmentation of breast lesions. A total of 34 features, including 29 textural and five morphological, are applied to a [Formula: see text]-fold cross-validation scheme, in which more relevant features are selected by quick-reduct algorithm, and the breast masses are discriminated into benign or malignant using SaDE-ELM classifier. The diagnosis accuracy of the system is assessed using parameters, such as accuracy (Ac), sensitivity (Se), specificity (Sp), positive predictive value (PPV), negative predictive value (NPV), Matthew's correlation coefficient (MCC), and area ([Formula: see text]) under receiver operating characteristics curve. The performance of the proposed system is also compared with other classifiers, such as support vector machine and ELM. The results indicated that the proposed SaDE algorithm has superior performance with [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], and [Formula: see text] compared to other classifiers.