Morphological Differences Research Articles

Intergrative Taxonomic Study of the Frullania parvistipula Complex with a Modern Circumscription of the Section Trachycolea (Frullaniaceae, Marchantiphyta).

Frullania (subg. Trachycolea) sect. Trachycolea has been studied using integrative taxonomy methods and utilizing sampling from almost all areas of distribution of the species previously referred to this section. A phylogenetic analysis based on nuclear ribosomal ITS1-2 and chloroplast trnL-F sequence data and a morphological study reveal a wide range of morphological variability within specimens that has largely disguised the overall taxonomic diversity. Frullania parvistipula, previously regarded as a widespread species, has been found to represent a group of separate species within different sections of F. subg. Trachycolea: F. caucasica and F. conistipula in F. sect. Trachycolea, F. parvistipula in F. sect. Australes, and F. fukuzawana in F. sect. Integristipulae II. Illustrations of the type specimens of F. conistipula, F. fukuzawana, and F. parvistipula, as well as illustrations of the sequenced specimens belonging to two of the discussed species (F. conistipula and F. parvistipula), are provided. The morphological differences separating the highly similar F. caucasica, F. conistipula, F. fukuzawana, F. koponenii, and F. parvistipula are discussed. A dichotomous key is presented for accepted species. New combinations are provided for two taxa.

Transcriptome Analysis Reveals the Variations in Enzyme Production of Saccharopolyspora rosea A22 under Different Temperatures.

Saccharopolyspora is a key microorganism in the fermentation of traditional fermented foods, capable of producing saccharifying and liquefying enzymes at elevated temperatures. However, the specific mechanisms and regulatory pathways governing Saccharopolyspora's response to ambient temperatures are not yet fully understood. In this study, the morphological differences in Saccharopolyspora rosea screened from traditional handmade wheat Qu at different temperatures were initially explored. At 37 °C, the mycelium exhibited abundant growth and radiated in a network-like pattern. As the temperature increased, the mycelium aggregated into clusters. At 50 °C, it formed highly aggregated ellipsoidal structures, with the mycelium distributed on the spherical surface. Subsequently, we assessed the biomass, saccharifying enzyme activity and liquefying enzyme activity of Saccharopolyspora rosea cultured at 37 °C, 42 °C and 50 °C. Furthermore, transcriptome analysis demonstrated that Saccharopolyspora rosea employs mechanisms related to the carbon metabolism, the TCA cycle, glycine, serine and threonine metabolisms, and microbial metabolism in diverse environments to coordinate its responses to changes in environmental temperature, as verified by the expression of typical genes. This study enhances our understanding of the differences in high-temperature enzyme production by Saccharopolyspora, and offers valuable guidance for the traditional fermented food industry to drive innovation.

LncRNAs involved in the Shade Avoidance Syndrome (SAS) in Arabidopsis thaliana

BackgroundPlant long non-coding RNAs (lncRNAs) have important regulatory roles in responses to various biotic and abiotic stresses, including light quality. However, no lncRNAs have been specifically linked to the Shade Avoidance Response (SAS).ResultsTo better understand the involvement of lncRNAs in shade avoidance, we examined RNA-seq libraries for lncRNAs with the potential to function in the neighbor proximity phenomenon in Arabidopsis thaliana (A. thaliana). Using transcriptomes generated from seedlings exposed to high and low red/far-red (R/FR) light conditions, we identified 13 lncRNA genes differentially expressed in cotyledons and 138 in hypocotyls. To infer possible functions for these lncRNAs, we used a ‘guilt-by-association’ approach to identify genes co-expressed with lncRNAs in a weighted gene co-expression network. Of 34 co-expression modules, 10 showed biological functions related to differential growth. We identified three potential lncRNAs co-regulated with genes related to SAS. T-DNA insertions in two of these lncRNAs were correlated with morphological differences in seedling responses to increased FR light, supporting our strategy for computational identification of lncRNAs involved in SAS.ConclusionsUsing a computational approach, we identified multiple lncRNAs in Arabidopsis involved in SAS. T-DNA insertions caused altered phenotypes under low R/FR light, suggesting functional roles in shade avoidance. Further experiments are needed to determine the specific mechanisms of these lncRNAs in SAS.

Histological comparison of shark dermis across various ecomorphologies.

The integument plays essential roles in the structural support, protection, and hydrodynamic capability among fishes. Most research on shark skin has focused on the external epidermal layer, while the larger dermis anchoring the dermal denticles has been mostly ignored. Shark dermis is composed of two layers, the upper stratum laxum and the lower stratum compactum, holding supportive collagen and elastic fibers. There may be morphological and compositional differences in the dermis across various species of sharks that could relate to their different swimming modes and ecologies. The goal of this study was to characterize and describe the dermis among three shark species, Ginglymostoma cirratum, Sphyrna mokarran, and Isurus oxyrinchus, each representing a different swimming mode. Histological characterizations were performed at 16 locations along the body of each shark; variables such as dermal thickness, abundance of collagen and elastic fibers, and fiber size were quantified. Results showed G. cirratum has the thickest skin overall, and the largest fiber size for both collagen and elastic fibers, with overall patterns of increased amounts of collagen fibers and decreased amount of elastic fibers. At the opposite end of the spectrum, I. oxyrinchus showed the thinnest dermis along the flank region, with overall patterns of increased elastic fibers and decreased collagen fibers. These findings may challenge our original assumptions of a rigid body in fast moving sharks and a more flexible body in slower moving sharks and highlight the diversity of the shark integument.

Synthesis and Characterization of Polyaniline/CuO Nanocomposites with Various Temperature

Polyaniline (PANI) metal oxide composites are known for their high electrical conductivity, environmental stability, and enhanced mechanical strength, making them valuable in applications such as sensors, batteries, and electromagnetic shielding. This study focuses on synthesizing and characterizing PANI/CuO nanocomposites to examine their structural, morphological, and functional properties at different synthesis temperatures. By integrating the conductive polymer PANI with copper oxide (CuO), a p-type semiconductor with a narrow band gap, the material’s capabilities are significantly enhanced. The oxidative polymerization of aniline, the process by which PANI is formed, requires precise control of oxidizing agents and reaction conditions, as these factors directly affect the polymerization, conductivity, and overall properties of the resulting nanocomposite. The PANI/CuO nanocomposites were synthesized at three different temperatures: 10℃, 25℃, and 50℃, to determine how temperature affects their characteristics. Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) were employed to analyze these nanocomposites. FTIR results revealed shifts in the quinoid and benzenoid rings, indicating hydrogen bonding between the NH group of PANI and the CuO surface, which accelerates charge transfer. The SEM analysis showed that while pure PANI exhibits a uniform globular morphology, the PANI/CuO nanocomposites display a nanorod morphology. These morphological differences impact the surface area and electrical conductivity of the composites, highlighting the significance of temperature in tailoring the material's properties for specific applications.

Glenoid morphology variation between patients with hypermobile shoulder joints and controls: Identification of hyperlaxity-related morphologic bone changes

ObjectiveOur study aims to quantitatively determine the concavity of the glenoid articular surface in patients with hypermobile shoulders compared to those without. MethodWe examined medical records of shoulder CTs from 2017 to 2022, selecting 50 patients with clinical signs of joint hypermobility for our case group and 54 for our control group. Two blinded readers independently assessed the glenoid morphology, calculating the glenoid concavity angle (GCA) and evaluating the articular surface shape as concave, flat, or convex. They also recorded the presence and severity of glenoid dysplasia. We compared these assessments between groups. ResultsThe mean GCA was significantly lower in the hypermobile group (2.3 ± 3.7° and 2.3 ± 3.8°) versus controls (6.6 ± 3.3° and 5.3 ± 3.8°) (P < 0.05). Interobserver reproducibility was high (ICC=0.76). A stark difference in glenoid morphology was noted between groups (P < 0.001), with a majority of hypermobile patients having a flat or convex glenoid. GCAs decreased with increasing shoulder laxity and dysplasia. GCA showed 77–81 % sensitivity and 55–82 % specificity for detecting shoulder hyperlaxity with a 4° cutoff. ConclusionThere is a significant association between GCA and shoulder hyperlaxity, demonstrating diagnostic efficacy and substantial interobserver agreement. Clinical RelevanceGCA values lower than 4° warrant further clinical investigation for shoulder hyperlaxity and associated conditions, which is crucial for patient treatment planning.

Revision of the Festuca marginata “group” (Festuca sect. Festuca, Poaceae) in Southern Europe, with special reference to France, Italy and Greece

ABSTRACT The Festuca marginata group includes several taxa of glaucous, thick-leaved fescues with three sclerenchyma strands, first described by Hackel as Festuca ovina subsp. laevis, which are common in the Euro-Mediterranean area. Ten different taxa (species and subspecies) are currently recognized in this group. Nevertheless, taxonomical works typically have only a local (mostly national) scope, and the recognized taxa show only few or negligible morphological differences, making their separate taxonomic status doubtful. Here we provide morphological, karyological, and genetic analysis (ISSR, flow cytometry) of the Festuca marginata group based on populations in a larger geographical scale including Central and Southern-Eastern Europe. We found that most of the local taxa are difficult to definitively distinguish and we suggest the whole group be treated as a single species, Festuca marginata, with two subspecies reflecting major differences in morphology and genome size between the Greece subsp. heldreichii and the remaining European populations, referred to as subsp. marginata.

Research on Corn Leaf and Stalk Recognition and Ranging Technology Based on LiDAR and Camera Fusion.

Corn, as one of the three major grain crops in China, plays a crucial role in ensuring national food security through its yield and quality. With the advancement of agricultural intelligence, agricultural robot technology has gained significant attention. High-precision navigation is the basis for realizing various operations of agricultural robots in corn fields and is closely related to the quality of operations. Corn leaf and stalk recognition and ranging are the prerequisites for achieving high-precision navigation and have attracted much attention. This paper proposes a corn leaf and stalk recognition and ranging algorithm based on multi-sensor fusion. First, YOLOv8 is used to identify corn leaves and stalks. Considering the large differences in leaf morphology and the large changes in field illumination that lead to discontinuous identification, an equidistant expansion polygon algorithm is proposed to post-process the leaves, thereby increasing the average recognition completeness of the leaves to 86.4%. Secondly, after eliminating redundant point clouds, the IMU data are used to calculate the confidence of the LiDAR and depth camera ranging point clouds, and point cloud fusion is performed based on this to achieve high-precision ranging of corn leaves. The average ranging error is 2.9 cm, which is lower than the measurement error of a single sensor. Finally, the stalk point cloud is processed and clustered using the FILL-DBSCAN algorithm to identify and measure the distance of the same corn stalk. The algorithm combines recognition accuracy and ranging accuracy to meet the needs of robot navigation or phenotypic measurement in corn fields, ensuring the stable and efficient operation of the robot in the corn field.

Fungal Diversity and Gibberellin Hormones Associated with Long Whips of Smut-Infected Sugarcanes.

Sugarcane smut, caused by the fungus Sporisorium scitamineum (Sydow), significantly affects sugarcane crops worldwide. Infected plants develop whip-like structures known as sori. Significant variations in these whip lengths are commonly observed, but the physiological and molecular differences causing these morphological differences remain poorly documented. To address this, we employed conventional microbe isolation, metagenomic, and metabolomic techniques to investigate smut-infected sugarcane stems and whips of varying lengths. Metagenomics analysis revealed a diverse fungal community in the sugarcane whips, with Sporisorium and Fusarium genera notably present (>1%) in long whips. Isolation techniques confirmed these findings. Ultra-performance liquid chromatography analysis (UHPLC-MS/MS) showed high levels of gibberellin hormones (GA3, GA1, GA4, GA8, and GA7) in long whips, with GA4 and GA7 found exclusively in long whips and stems. Among the prominent genera present within long whips, Fusarium was solely positively correlated with these gibberellin (GA) hormones, with the exception of GA8, which was positively correlated with Sporisorium. KEGG enrichment analysis linked these hormones to pathways like diterpenoid biosynthesis and plant hormone signal transduction. These findings suggest that Fusarium may influence GA production leading to whip elongation. Our study reveals fungal dynamics and gibberellin responses in sugarcane smut whips. Future research will explore the related molecular gibberellin synthesis mechanisms.

Karyotypic description and comparison of Litoria (L.) paraewingi (Watson et al., 1971), L.ewingii (Duméril et Bibron, 1841) and L.jervisiensis (Duméril et Bibron, 1841) (Amphibia, Anura).

The karyotype of Litoria (L.) paraewingi (Watson et al., 1971) (Big River State Forest, Victoria) is described here for the first time. It is prepared following tissue culture of toe clipping macerates, cryopreservation, reculture and conventional 4',6-diamidino-2-phenylindole (DAPI) staining. The L.paraewingi karyotype is then compared to similarly processed IUCN (International Union for the Conservation of Nature) least concern members L.ewingii (Duméril et Bibron, 1841) (southern Victoria) and L.jervisiensis (Duméril et Bibron, 1841) (Myall Lakes National Park, New South Wales), all members of the same L.ewingii complex/group. The L.paraewingi diploid number is 2n = 26, the same as for the other two species. Litoriaparaewingi chromosomes 1, 2, 6 and 7 are submetacentric, chromosomes 3 and 5 are subtelocentric and the remainder are metacentric. No secondary constriction or putative nucleolus organiser region (NOR) was readily identifiable following conventional DAPI staining in any scored L.paraewingi metaphase spread. Conversely, a putative NOR was readily identifiable on the long arm of chromosome 1 in all examined metaphase spreads for the other two species. The karyotypes of L.ewingii and L.jervisiensis here further differ from L.paraewingi with chromosome 1 being metacentric and chromosomes 8 and 10 being submetacentric for both former species. The L.jervisiensis karyotype differs from those of L.ewingii and L.paraewingi by DAPI staining with: (i) apparent relative length inversion of subtelocentric chromosome 3 and metacentric chromosome 4 and (ii) chromosome 6 being metacentric rather than submetacentric. All three species have a highly conserved chromosome morphology with respect to chromosomes 2, 5, 7, 9, 11, 12 and 13. The greatest gross morphological difference karyotypically is observed between L.paraewingi and L.jervisiensis. These karyotype data support the previous phylogenetic separation of these three species based upon genetic compatibility and behavioural, biochemical and molecular genetic analyses.

Simple construction of molybdate anions-intercalated NiCo-based layered double hydroxides nanosheet arrays on carbon fibers for enhanced flexible fiber-shaped supercapacitors

As the energy supply devices for miniaturized, wearable, portable and intellectualized electronic products, flexible fiber-shaped supercapacitors (FSCs) have attracted great attention by virtue of their peculiar superiorities such as ultra-fast charge/discharge ability, ultra-high output power, ideal service life, outstanding mechanical flexibility, and superior compatibility with the human body. The performance enhancement of FSCs is highly dependent on the high-performance active electrode materials. In this work, a series of molybdate anions-intercalated NiCo based layered double hydroxides (NiCoMo-LDHs) have been synthesized on flexible carbon fiber (CF) by a simple electrodeposition strategy by regulating the Mo content and the growth time. It turns out that the intercalation of molybdate anions can significantly widen the interlayer spacing and reduce the crystallinity of the synthesized LDH materials. The morphological differences between the LDHs with different Ni/Co/Mo ratios are analyzed, and the morphological evolution process of the materials with the specific Ni/Co/Mo ratio of 1:3:0.2 are systematically investigated. The well-developed NiCoMo-LDH nanosheets electrode with appropriate Ni/Co/Mo ratio (NCM2–500) delivers the best electrochemical performances among all the synthesized LDHs. In particular, the synthesized NCM2–500 fiber electrode exhibits excellent specific capacitance, superior electrical conductivity and favourable cycling stability. Additionally, the assembled parallel type NCM2–500//AC FSC device using NCM2–500 and activated carbon (AC) as the cathode and anode with the assistance of PVA/KOH gel electrolyte demonstrates a brilliant specific energy of 36 Wh cm−1 at 845 W cm−1 (nearly 17 Wh kg−1 at about 400 W kg−1) and a high cycle lifespan of maintaining 103 % of the pristine capacity after 5000 cycles. This FSC device is an ideal candidate for next-generation applications due to its remarkable electrochemical properties.

Three-Dimensional Morphometric Analysis of the Volar Cortical Shape of the Lunate Facet of the Distal Radius.

In cases of distal radius fractures, the fixation of the volar lunate facet fragment is crucial for preventing volar subluxation of the carpal bones. This study aims to clarify the sex differences in the volar morphology of the lunate facet of the distal radius and its relationship with the transverse diameter of the distal radius. Sixty-four CT scans of healthy wrists (30 males and 34 females) were evaluated. Three-dimensional (3D) images of the distal radius were reconstructed from the CT data. We defined reference point 1 as the starting point of the inclination toward the distal volar edge, reference point 2 as the volar edge of the joint on the bone axis, and reference point 3 as the volar edge of the distal radius lunate facet. From the 3D coordinates of reference points 1 to 3, the bone axis distance, volar-dorsal distance, radial-ulnar distance, 3D straight-line distance, and inclination angle were measured. The transverse diameter of the radius was measured, and its correlations with the parameters were evaluated. It was found that in males, compared to females, the transverse diameter of the radius is larger and the protrusion of the volar lunate facet is greater. This suggests that the inclination of the volar surface is steeper in males and that the volar locking plate may not fit properly with the volar cortical bone of the lunate facet, necessitating additional fixation.

Exploring phosphate impact on arsenate uptake and distribution in freshwater phytoplankton: Insights from single-cell ICP-MS

In this study, we investigated the interaction between arsenate (AsV) and phosphate (PO43−) in freshwater phytoplankton using single-cell inductively coupled plasma mass spectrometry (SC-ICP-MS). This study aimed to elucidate the influence of varying PO43− concentrations on arsenic (As) uptake and distribution at the single-cell level, providing insights into intraspecies diversity. Two species of freshwater phytoplanktons, Scenedesmus acutus and Pediastrum duplex, were cultured under different concentrations of PO43− and AsV in a controlled laboratory environment. Scenedesmus acutus, a species with strong salt tolerance, and Pediastrum duplex, known for its weak salt tolerance, were selected based on their contrasting behaviors in previous studies. SC-ICP-MS revealed non-uniform uptake of As by individual phytoplankton cells, with distinct variations in response to PO43− availability. Arsenic uptake by both species declined with a high PO43− level after 7 days of exposure. However, after 14 days, As uptake increased in S. acutus with higher PO43− concentrations, but decreased in P. duplex. Moreover, our findings revealed differences in cell morphology and membrane integrity between the two species in response to AsV and various PO43− concentrations. S. acutus maintained cell integrity under all experimental culture conditions, whereas P. duplex experienced cell lysis at elevated AsV and PO43− concentrations. This study highlights the varying responses of freshwater phytoplankton to changes in AsV and PO43− levels and underscores the advantages of SC-ICP-MS over conventional ICP-MS in providing detailed, cellular level insights. These findings are crucial for understanding and managing As pollution in aquatic ecosystems.

Cryptogam biomass estimation using taxonomic and life form models for accurate assessment

Accurate estimation of cryptogam biomass, encompassing bryophytes and lichens, is crucial for understanding their ecological significance. This estimation is conducted based on the strong correlations between mass and volume of cryptogams. However, mass–volume correlations vary among cryptogams because of their morphological differences. This problem can be solved using models that consider life forms that classify cryptogams based on morphological similarities. In this study, we investigated whether life form models improve cryptogam biomass estimation accuracy. The cryptogam mass–volume correlation of each life form was estimated using Bayesian linear models. The coefficients and intercepts of linear models differed between life forms, which was attributed to the morphological characteristics of each life form. Therefore, life form models can improve the accuracy of estimation models by incorporating morphological differences. However, taxonomic models that consider only the taxonomic difference (bryophytes vs lichens) demonstrated better overall estimation than the life form models, probably because of the ability of taxonomic models to capture systematic differences between bryophytes and lichens. Furthermore, these models may mitigate estimation errors related to morphological variations that cannot be adequately represented by life form types. Based on these results, we propose the appropriate use of estimation models.

Multiphasic titania photoanode: A facile phase assisted approach to enhance the photoelectrochemical and photovoltaic performance

A facile low-temperature method has been proposed and utilized to synthesize pristine and multiphasic titania. Increasing reactant acid content led to the phase transition of titania from pristine anatase to triphasic anatase-rutile-brookite mixed phase; then to biphasic anatase-rutile mixed phase and ultimately pristine rutile. Morphological differences between the samples led to different dye loading on the Dye Sensitized Solar Cell (DSSC) photoanodes, with anatase showing highest loading. However, the Electrochemical Impedance Spectroscopic (EIS) analyses revealed that the triphasic titania photoanode showed superior charge transport ability as evidenced by the lowest charge transfer resistance and highest carrier lifetime. This led to the triphasic DSSC showing a photoconversion efficiency of 4.23 % which is 45 % greater than the reference DP25 DSSC and 72 % better than that of the anatase DSSC despite having a 24 % lower dye loading. These factors suggest that the charge transport properties precede the dye loading capability of the photoanode in determining the DSSC performance. The intimate ternary interfacial junction between the anatase, rutile and brookite phases may be responsible for the enhanced charge transport properties of the triphasic titania. Thus, it is essential to ensure superior photoanode charge transport characteristics to enhance the DSSC performance.

Individual dietary specialization and intraspecific morphological divergence of an endemic fish species: the case of Glanidium ribeiroi in the Iguassu ecoregion

ABSTRACT Because of the importance of information about endemic species and global biodiversity ecoregion, we tested the hypothesis that individuals of Glanidium ribeiroi (endemic species in the Iguassu ecoregion) are specialists and that this specialization decreases with increasing body size, especially concerning the size of the mouth and head, which can be limiting for the quantity and size of prey consumed by smaller individuals. Fish sampling was conducted monthly using gill nets and longlines from 2013 to 2016 in the main channel of the Iguaçu River and two tributaries. We observed the consumption of aquatic insects by smaller individuals and seeds, unidentified fish, and Decapoda by larger individuals. Individual dietary specialization was high and related to head width. The morphological traits of smaller-sized individuals were related to displacement and movement (larger peduncle), and the larger-sized individuals were related to high performance in the exploitation and prey acquisition (larger head and mouth, dorsal eyes, longer intestines). Our results highlight the importance of assessing individual variations within a population, favoring an understanding of population dynamics. In addition, morphological differences may imply differences in the use of habitat and food resources between individuals of larger and smaller body sizes and influence individual specialization.

Schubartamon serenum new genus and species, a troglobitic crab from Laos, new records of Erebusa calobates Yeo &amp; Ng, 1999 (Decapoda, Brachyura, Potamidae), and insights on the potamid genera of Indochina

Abstract A new genus and species of troglobitic potamid crab, Schubartamon serenum gen. nov., sp. nov., is described based on an adult female from Vientiane province, Central Laos, found in Vang Vieng karst in the cave Tham Nang Oua (also called Tham Nang Hua). The new genus can be clearly distinguished morphologically from Erebusa, another troglobitic genus known from the single species E. calobates, also from Central Laos, in the Khammouan karst, and for which we now have additional material collected by two French expeditions in several caves scattered around this province, enabling the species to be better documented. The immense karst of Khammouan is not very fragmented, so that the dispersal of species can be quite possible, which explains why E. calobates can be found there dispersed across distant caves. Schubartamon serenum gen. nov., sp. nov. has been collected much further north, in the Vang Vieng karst, Vientiane province, more than 400 km north of Thakhek, the capital of Khammouan. The two species share similar troglobitic adaptations, but the morphological differences between them are significant at a generic level. In particular, compared to those of E. calobates, the differently shaped vulvae of S. serenum gen. nov., sp. nov. alone represent an excellent character for generic distinction. A review of the potamid genera of Indochina is also presented.

Morphology and Inheritance of Wavy Flower Form in Periwinkle (Catharanthus roseus (L.) G. Don).

Periwinkle (Catharanthus roseus (L.) G. Don) is renowned for its diverse colors and resilience to harsh climates. Still, most commercial cultivars predominantly display flat petals. Using cultivars representing non-wavy, medium-wavy, and extreme-wavy flower forms, we examined morphological differences in both their mature leaves and floral organs. Phenotypes of self-pollinated (S1) and cross-pollinated (F1, F2) populations further underscored their morphological distinctions. Specifically, the extreme-wavy type displayed elliptical leaves, broader than the non-wavy type, with a pronounced acute apex and a notably wrinkled blade surface. The non-wavy type also bore intensely wavy petal margins and exhibited a smaller flower diameter, with a notable absence of a functional pistil, indicating female sterility. The insights gained allowed for early differentiation during the seedling period. This study suggests that the inheritance of these flower forms is regulated by an allele WAVY (Wv), which exhibits incomplete dominance. Concretely, the non-wavy form arises from a recessive homozygous expression (wvwv), the extreme-wavy from a dominant homozygous expression (WvWv), and the medium-wavy from a heterozygous expression (Wvwv). This study provides clarity on morphological descriptions and inheritance patterns of wavy flower forms, facilitating strategic breeding of diverse flower forms in periwinkle.

Automated Craniofacial Biometry with 3D T2w Fetal MRI.

Evaluating craniofacial phenotype-genotype correlations prenatally is increasingly important; however, it is subjective and challenging with 3D ultrasound. We developed an automated landmark propagation pipeline using 3D motion-corrected, slice-to-volume reconstructed (SVR) fetal MRI for craniofacial measurements. A literature review and expert consensus identified 31 craniofacial biometrics for fetal MRI. An MRI atlas with defined anatomical landmarks served as a template for subject registration, auto-labelling, and biometric calculation. We assessed 108 healthy controls and 24 fetuses with Down syndrome (T21) in the third trimester (29-36 weeks gestational age, GA) to identify meaningful biometrics in T21. Reliability and reproducibility were evaluated in 10 random datasets by four observers. Automated labels were produced for all 132 subjects with a 0.03% placement error rate. Seven measurements, including anterior base of skull length and maxillary length, showed significant differences with large effect sizes between T21 and control groups (ANOVA, p<0.001). Manual measurements took 25-35 minutes per case, while automated extraction took approximately 5 minutes. Bland-Altman plots showed agreement within manual observer ranges except for mandibular width, which had higher variability. Extended GA growth charts (19-39 weeks), based on 280 control fetuses, were produced for future research. This is the first automated atlas-based protocol using 3D SVR MRI for fetal craniofacial biometrics, accurately revealing morphological craniofacial differences in a T21 cohort. Future work should focus on improving measurement reliability, larger clinical cohorts, and technical advancements, to enhance prenatal care and phenotypic characterisation.

Hybrid-feature based spherical quasi-conformal registration for AD-induced hippocampal surface morphological changes

Background and objectiveEstablishing accurate one-to-one morphological correspondence between different hippocampal surfaces is a solid foundation for the analysis of AD-induced hippocampal morphological changes. However, owing to the large variations between hippocampal surfaces, exiting registration work either fails to obtain the accurate matching of local and overall morphological features or does not preserve the bijectivity during parametric mapping. For this reason, this study proposes a hybrid-feature based spherical quasi-conformal registration (HSQR) method that can effectively maintain the diffeomorphic property while meeting the hybrid-feature matching constraints in the spherical parameter domain. MethodsThe HSQR algorithm is primarily achieved through hippocampal surface hybrid feature extraction and spherical quasi-conformal registration. First, hybrid features for a comprehensive morphological description of the hippocampal surface were established, which included essential anatomical features (landmarks) and mean curvature (intensity) features to ensure the accuracy of surface morphology alignment. Second, spherical parameterization was applied to genus-0 closed surfaces, such as the hippocampus, which maximized the preservation of the original local surface morphology through area-preserving properties. Third, a novel spherical quasi-conformal registration algorithm that can handle large deformations is established. It transforms a 3D spherical parameter domain into a 2D plane parameter domain using iterative local stereo projection to improve the efficiency of the registration algorithm. Subsequently, by controlling the Beltramin coefficient, the hybrid morphological features could be aligned while ensuring bijection before and after registration. ResultsUsing a cohort including 161 patients with amyloid-β (Aβ) positive Alzheimer disease (AD), 234 Aβ positive mild cognitive impairment (MCI) and 266 Aβ negative cognitively unimpaired (CU) individuals from the Alzheimer's Disease Neuroimaging Initiative (ADNI) database, we set up the experiment which indicated that the HSQR-based whole bilateral hippocampal atrophy features demonstrated the stronger statistical power for group morphological differences of CU vs. MCI with q-value: 0.0453 for left hippocampus and 0.0401 for right hippocampus and group morphological differences of AD vs. MCI with q-value: 0.0282 for left hippocampus and 0.0421 for right hippocampus. ConclusionsOur registration algorithm may provide a solid foundation for the accurate quantification of hippocampal surface morphological changes for the differential diagnosis and tracking of AD.