Morphological Differences Research Articles

Molecular phylogenetic and historical biogeographical relationships of Laudakia (Squamata: Agamidae) and intraspecific differentiation of L. stoliczkana inferred from mitochondrial DNA sequences

The rock lizard genus Laudakia is representative agamid species from the arid zone, and its genus division has not been resolved yet. Laudakia stoliczkana, which occurs in both Xinjiang, China, and the Gobi Altai, Mongolia, is divided into two subspecies, Laudakia stoliczkana stoliczkana and Laudakia stoliczkana altaica, based on morphological differences, but little is known about the molecular genetic differences between the two subspecies. This study reconstructs the phylogenetic tree of Laudakia and analyses molecular differences between two subspecies of L. stoliczkana by DNA barcoding (COI and 16S). Our results show that: (1) Laudakia is monophyletic and the phylogenetic tree is broadly divided into three main branches, namely branch A (L. caucasia and L. stoliczkana), which occurs mainly in Central Asia and the Gobi Altai region to the north, branch B (L. stellio), which occurs in the Middle East, and branch C (L. tuberculata, L. papenfussi, L. himalayana, L. wui, L. stellio), which occurs mainly near the Himalayas; (2) The biogeographic analysis of Laudakia suggests that the genus probably originated at 43.72 Ma (95% confidence interval HPD: 23.53–66.12Ma) and is associated with the uplift of the Tibetan Plateau and the aridification of Central Asias subsequently; (3) Molecular genetic distances and morphological differences support the delimitation of the two subspecies of L. stoliczkana, with divergence between the two subspecies estimated to have occurred at 3.27 Ma (95% confidence interval HPD: 1.58–5.87Ma), in associated with the recent uplift of the Tian Shan Mountains. The results highlight the importance of the uplift of the Central Asian mountains and the Tibetan Plateau for the divergence of Laudakia.

3D Morphological Feature Quantification and Analysis of Corn Leaves.

Marked variations in the 3-dimensional (3D) shape of corn leaves can be discerned as a function of various influences, including genetics, environmental factors, and the management of cultivation processes. However, the causes of these variations remain unclear, primarily due to the absence of quantitative methods to describe the 3D spatial morphology of leaves. To address this issue, this study acquired 3D digitized data of ear-position leaves from 478 corn inbred lines during the grain-filling stage. We propose quantitative calculation methods for 13 3D leaf shape features, such as the leaf length, 3D leaf area, leaf inclination angle, blade-included angle, blade self-twisting, blade planarity, and margin amplitude. Correlation analysis, cluster analysis, and heritability analysis were conducted among the 13 leaf traits. Leaf morphology differences among subpopulations of the inbred lines were also analyzed. The results revealed that the 3D leaf traits are capable of revealing the morphological differences among different leaf surfaces, and the genetic analysis revealed that 84.62% of the 3D phenotypic traits of ear-position leaves had a heritability greater than 0.3. However, the majority of 3D leaf shape traits were strongly affected by environmental conditions. Overall, this study quantitatively investigated 3D leaf shape in corn, providing a reliable basis for further research on the genetic regulation of corn leaf morphology and advancing the understanding of the complex interplay among crop genetics, phenotypes, and the environment.

Machine Learning and Statistical Shape Modelling Methodologies to Assess Vascular Morphology before and after Aortic Valve Replacement

Introduction: Statistical shape modelling (SSM) is used to analyse morphology, discover qualitatively and quantitatively unique shape features within a population, and generate mean shapes and shape modes that show morphological variability. Hierarchical agglomerative clustering is a machine learning analysis used to identify subgroups within a given population in relation to shape features. We tested the application of both methods in the clinically relevant scenario of patients undergoing aortic valve repair (AVR). Every year, around 5000 patients undergo surgical AVR in the UK. Aims: Evaluate aortic morphology and identify subgroups amongst patients who had undergone AVR, including Ozaki, Ross, and valve-sparing procedures using SSM and unsupervised hierarchical clustering analysis. This methodological framework can evaluate both pre- and post-surgical variability across subgroups undergoing different surgeries. Methods: Pre- (n = 47) and post- (n = 35) operative three-dimensional (3D) aortic models were reconstructed from computed tomography (CT) and cardiac magnetic resonance (CMR) images. Computational analyses for SSM and hierarchical clustering were run separately for the two subgroups, assessing (a) ascending aorta only and (b) the whole aorta. This allows for exploring possible variations in morphological classification related to the input shape. Results: Most patients in the Ross procedure subgroup exhibited differences in aortic morphology from other subgroups, including an elongated ascending and wide aortic arch pre-operatively, and an elongated ascending aorta with a slightly enlarged sinus post-operatively. In hierarchical clustering, the Ross aortas also appeared to cluster together compared to the other surgical procedures, both pre-operatively and post-operatively. There were significant differences between clusters in terms of clustering distance in the pre-operative analyses (p = 0.003 for ascending aortas, p = 0.016 for whole aortas). There were no significant differences between the clusters in post-operative analyses (p = 0.47 for ascending, p = 0.19 for whole aorta). Conclusions: We demonstrated the feasibility of evaluating aortic morphology before and after different aortic valve surgeries using SSM and hierarchical clustering. This framework could be used to further explore shape features associated with surgical decision-making pre-operatively and, importantly, to identify subgroups whose morphology is associated with poorer clinical outcomes post-operatively. Statistical shape modelling (SSM) and unsupervised hierarchical clustering are two statistical methods that can be used to assess morphology, show morphological variations, with the latter being able to identify subgroups within a population. These methods have been applied to the population of aortic valve replacement (AVR) patients since there are different surgical procedures (traditional AVR, Ozaki, Ross, and valve-sparing). The aim is to evaluate aortic morphology and identify subgroups within this population before and after surgery. Computed tomography and cardiac magnetic resonance images were reconstructed into 3D models of the ascending aorta and whole aorta, which were then input into SSM and hierarchical clustering. The results show that the Ross aortic morphology is quite different from the other aortas. The clustering did not classify the aortas based on the surgical procedures; however, most of the Ross group did cluster together, indicating low variability within this surgical group.

Spatiotemporal Surface Temperature Measurements Resolving Flame-Wall Interactions of Lean H2-Air and CH4-Air Flames Using Phosphor Thermometry

AbstractSpatiotemporal wall temperature (Twall) distributions resulting from flame-wall interactions of lean H2-air and CH4-air flames are measured using phosphor thermometry. Such measurements are important to understand transient heat transfer and wall heat flux associated with various flame features. This is particularly true for hydrogen, which can exhibit a range of unique flame features associated with combustion instabilities. Experiments are performed within a two-wall passage, in an optically accessible chamber. The phosphor ScVO4:Bi3+ is used to measure Twall in a 22 × 22 mm2 region with 180 µm/pixel resolution and repetition rate of 1 kHz. Chemiluminescence imaging is combined with phosphor thermometry to correlate the spatiotemporal dynamics of the flame with the heat signatures imposed on the wall. Measurements are performed for lean H2-air flames with equivalence ratio Φ = 0.56 and compared to CH4-air flames with Φ = 1. Twall signatures for H2-air Φ = 0.56 exhibit alternating high and low-temperature vertical streaks associated with finger-like flame structures, while CH4-air flames exhibit larger scale wrinkling with identifiable crest/cusp regions that exhibit higher/lower wall temperatures, respectively. The underlying differences in flame morphology and Twall distributions observed between the CH4-air and lean H2-air mixtures are attributed to the differences in their Lewis number (CH4-air Φ = 1: Le = 0.94; H2-air Φ = 0.56: Le = 0.39). Findings are presented at two different passage spacings to study the increased wall heat loss with larger surface-area-to-volume ratios. Additional experiments are conducted for H2-air mixtures with Φ = 0.45, where flame propagation was slower and was more suitable to resolve the wall heat signatures associated with thermodiffusive instabilities. These unstable flame features impose similar wall heat fluxes as flames with 2–3 times greater flame power. In this study, these flame instabilities occur within a small space/time domain, but demonstrate the capability to impose appreciable heat fluxes on surfaces.

Effect of dual tobacco smoking of hookah and cigarettes on semen parameters of infertile men.

The research regarding the effect of hookah smoking on health is still deficient, even though it has been proven to jeopardize human health by raising the hazard of different types of cancers, infections, and cardiovascular disease. We aimed to study the effect of dual tobacco smoking (hookah and cigarettes) on semen parameters of infertile men. In this cross-sectional study, we studied the effect of different types of smoking patterns on human semen parameters among men who visited IVF laboratories to do a seminal fluid analysis (SFA). A total number of 761 participants were included, divided into the following: 108 dual smokers, 219 hookah smokers, 222 cigarette smokers, and 212 non-smokers. To analyze the effect of dual smoking on normal morphology, an interaction term between the cigarette index and hookah index was used. Multivariable regression analysis after adjustment for age, BMI, education level, children, chronic diseases, varicocele, testicular surgery history, infertility duration, and cause revealed no significant difference in the sperm concentration and the percentage of progressive motility between non-smokers, cigarette smokers, or hookah smokers. However, there was a significant difference in the log of normal morphology percentage between the three groups. Cigarette and hookah smoking were significantly associated with having lower percentages of normal morphology. There was a significant difference in the log-normal morphology %, where light and heavy dual smokers had the least exponential beta of log-normal morphology %, 0.43 (95% CI: 0.33-0.55) and 0.36 (95% CI: 0.24-0.53), respectively. Dual tobacco smoking can adversely affect sperm morphology.

Morphological, Physiological, and Photosynthetic Differences of Tartary Buckwheat Induced by Post-Anthesis Drought

Tartary buckwheat (Fagopyrum tataricum (L.) Gaertn) is a crop of significant interest due to its nutritional value and resilience to drought conditions. However, drought, particularly following flowering, is a major factor contributing to yield reduction. This research employed two distinct Tartary buckwheat genotypes to investigate the effects of post-anthesis drought on growth and physicochemical characteristics. The study aimed to elucidate the response of Tartary buckwheat to drought stress. The findings indicated that post-anthesis drought adversely impacted the growth, morphology, and biomass accumulation of Tartary buckwheat. Drought stress enhanced the maximum photosynthetic capacity (Fv/Fm) and light protection ability (NPQ) of the ‘Xiqiao-2’ genotype. In response to drought stress, ‘Dingku-1’ and ‘Xiqiao-2’ maintained osmotic balance by accumulating soluble sugars and proline, respectively. Notably, ‘Xiqiao-2’ exhibited elevated levels of flavonoids and polyphenols in its leaves, which helped mitigate oxidative damage caused by drought. Furthermore, rewatering after a brief drought period significantly improved plant height, stem diameter, and biomass accumulation in ‘Dingku-1’. Overall, ‘Xiqiao-2’ demonstrated greater long-term tolerance to post-anthesis drought, while ‘Dingku-1’ was less adversely affected by short-term post-anthesis drought.

Investigations on Target Strength Estimation Methods: A Case Study of Chub Mackerel (Scomber japonicus) in the Northwest Pacific Ocean

Target strength (TS) is an acoustic property of individual marine organisms and a critical factor in acoustic resource assessments. However, previous studies have primarily focused on measuring TS at narrowband, typical frequencies, which cannot meet the requirements of broadband acoustic technology research. Additionally, for marine fish, conducting in situ TS measurements is challenging due to environmental constraints. Rapidly freezing and preserving fish samples for transfer to the laboratory is a common method currently used. However, the impact of freezing preservation during transportation on the swimbladder morphology and TS of swimbladder-bearing fish remains unclear. This study investigated the differences in swimbladder morphology and TS of Chub mackerel (Scomber japonicus) before and after freezing. Then, we compared different TS measurement methods through ex situ TS measurements (45–90 kHz, 160–260 kHz) and the Kirchhoff-ray mode model (KRM) simulations (1–300 kHz) and studied the broadband scattering characteristics of Chub mackerel based on the KRM model. The results showed that the morphology of the swimbladder was reduced after freezing, with significant changes in swimbladder height and volume. However, the trends of TS were not consistent and the changes were small. The difference between the KRM model and ex situ measurements was −0.38 ± 1.84 dB, indicating good applicability of the KRM. Based on the KRM results, the TS exhibited significant directivity, with fluctuations gradually decreasing and stabilizing as frequency increased. In the broadband mode, the relationship between TS and body length (L) of Chub mackerel was TS = 20log(L) − 66.76 (30 > L/λ >10). This study could provide a reference for acoustic resource estimation and species identification of Chub mackerel in the Northwest Pacific Ocean.

Toxicity of a management bait for grass carp (Ctenopharyngodon idella) incorporated with Antimycin A.

No current technology can specifically target grass carp (Ctenopharyngodon idella) for control within aquatic ecosystems. Rotenone and Carbon Dioxide-Carp are currently the only available registered pesticides for grass carp; they are nonselective and typically applied throughout the water, equally exposing target and native species. A more selective control tool or pesticide application could be used by resource managers to support mitigation efforts. Development of delivery systems that exploit carp feeding strategies could increase selectivity of pesticides and minimize effects on native fishes. A pesticide with selective delivery could be less labor intensive and used within an integrative pest management strategy. The present study examined Antimycin A toxicity in juvenile and sub-adult grass carp and rainbow trout (Oncorhynchus mykiss) across two routes of exposure. Water-based toxicity studies were used to calculate the concentration to cause lethality in 50% of treated fish (LC50) at 24-h, while oral gavage toxicity studies were used to calculate the dose to cause lethality in 50% of treated grass carp and rainbow trout (LD50) 24- to 96-h. Although rainbow trout were more sensitive than grass carp to Antimycin A through water-based exposure, oral toxicity was similar between species, even with inherent gastrointestinal morphological differences. Successful delivery of a lethal dose of Antimycin A to grass carp was achieved through an oral route of exposure using the rapeseed bait and shows promise for registration as a control tool and eventual use in pest management plans. Although a lethal dose of Antimycin A could be incorporated into a single bait pellet, more bait was required to achieve desired mortality when fed to fish under laboratory conditions.

Decades of monitoring plastic pollution in seabirds in Canada: Spatial, temporal, and methodological insights

Plastic ingestion by seabirds is an increasing issue worldwide, yet species can vary in ingestion based on ecological and morphological differences. This provokes the ecological question of which species are better suited to monitor plastic ingestion across regions and time. In Canada, we examined plastic ingestion in sympatric northern fulmars (Fulmarus glacialis), black-legged kittiwakes (Rissa tridactyla), thick-billed murres (Uria lomvia), and black guillemots (Cepphus grylle). Here, we present new data and compare to historical work to inform plastic pollution monitoring in Canada. In 2021, 51 % of fulmars, 7 % of kittiwakes and 7 % of murres contained plastic, whereas guillemots had no pieces >1 mm. Regardless of the methods used to collect and process samples, fulmars continue to have low levels of ingestion compared to the European Arctic, but high levels compared to other species in the Canadian Arctic, emphasizing their continued utility as a monitoring tool for plastic pollution in Canada.

The Relationship Between Craniocervical Morphology and the Presence and Level of Cervical Facet Joint Degeneration.

To investigate the relationship between craniocervical morphology and the presence and level of cervical facet joint degeneration (FJD). A total of 108 consecutive female patients aged 45-55 years who had undergone neck + brain CT angiography were included in this retrospective sectional study. Only patients of a certain age and of the same gender were included in order to eliminate the differences that create a disposition to the development of spinal degeneration. The presence of facet joint (FJ) arthritis (grade ≥2 degeneration in at least one affected facet joint) and the grade of the facet joint degeneration for each patient were recorded. A total of 20 lengths and 3 angles of craniocervical morphology were measured. The differences between the individuals with and without FJ arthritis were investigated with the independent-sample t test, and the relationship between the FJD grade and craniocervical morphology was investigated using the Spearman correlation test. Individuals with FJ arthritis were found to have longer Grabb-Oakes measurement, shorter FM AP length, lower ADI, lower EOP thickness, higher clivus length, higher crista gall-ATS distance, lower CCA angle, lower distance between the C1 vertebra lateral masses, and higher BAI than those without FJ arthritis (P ˂ 0.05). Besides, we found that the FJD grade increased as the Grabb-Oakes measurement increased, ADI distance decreased, FM AP length decreased, EOP thickness decreased, clivus length increased, basal angle increased, distance between the C1 vertebra lateral masses decreased, and BAI increased (P ˂ 0.05). Differences in craniocervical morphology are statistically associated with degenerative processes that result in degenerative changes in the facet joint. Therefore, some morphological changes in craniocervical anatomy cause changes in the momentum and distribution of the load on the facet joints, predisposing the patient to facet arthropathy and osteoarthritis.

Histopathological and phylogenetic description of an Amazonian cnidaria microparasite Myxobolus rousseauxii n. sp. infecting the gill arches of Brachyplatystoma rousseauxii (Siluriformes)

From genus Myxobolus, cnidarians of Myxozoa class, is well known for infecting economically important fish species and, as result, relevant losses in aquaculture production can be observed. They are present in a big range of fish in its natural habitat, including the migratory Brachyplatystoma rousseauxii catfish. This study aimed is to develop an integrative characterization of a new species of Myxobolus, located in B. rousseauxii's gills. To accomplish this, 30 specimens of B. rousseauxii catfish were collected from Mosqueiro Island in Pará, Brazil; necropsied and analyzed for morphology, histology and molecular characteristics. Cysts with conjunctival capsule development made up of fibroblasts were observed at the gill arches; such proliferation caused bone tissue loss and cartilage compression. The cysts contained Myxobolus myxospores measuring 9.9 μm of length and 9.6 μm of width, whereas polar capsules were 5.4 μm long and 3.4 μm wide, with 8 to 9 coils of polar tubules. Phylogenetic analyses revealed that new species were included in a subclade alongside species from the same geographic location and infection site that infect Siluriformes fish. Morphological and molecular differences revealed that Myxobolus spp. parasite-host associations through histopathology supporting the designation of a new M. rousseauxii n. sp. species in B. rousseauxii, a commercially important fish.

Research on the historical spatial characteristics and conservation strategies of colonial cities in Asia and Africa: a case study of 21 typical cities

Colonial cities in Asia and Africa, developed under the dual influence of native and sovereign cultures during the colonial era, exhibit unique urban morphological characteristics and reflect the planning ideologies of diverse cultures. Thus, the morphological study of colonial cities in Asia and Africa is crucial for understanding and identifying the historical and cultural value of these cities, which in turn enables the formulation of precise conservation strategies. In light of this, the study develops an urban morphological analysis methodology comprising "Colonial Background Analysis—Morphological Characteristics Analysis—Driving Factor Extraction" based on the Conzenian Approach, which is used to examine the morphology of 21 typical colonial cities in Asia and Africa across various colonial periods. As a result, "Dual-City" emerges as the core spatial characteristic of colonial cities in Asia and Africa, reflecting the morphological differences in road layouts, urban fabric, and urban cores between native and European zones. Additionally, as native settlement sizes, social structures, and cultural identities differ between cities, three major spatial patterns of the "Dual-City" model can be identified: separated, mediated, and integrated spatial patterns, resulting from the varied planning approaches applied by colonizers. Furthermore, suggestions for the conservation of colonial heritage are proposed based on the driving factors analysis from the morphological study.

Secondary contact zone and genetic introgression in closely related haplodiploid social spider mites.

How frequently hybridisation and gene flow occur in the contact zones of diverging taxa is important for understanding the speciation process. Stigmaeopsis sabelisi and Stigmaeopsis miscanthi high-aggression form (hereafter, S. miscanthi HG) are haplodiploid, social spider mites that infest the Chinese silver grass, Miscanthus sinensis. These two species are closely related and parapatrically distributed in Japan. In mountainous areas, S. sabelisi and S. miscanthi HG are often found in the highlands and lowlands, respectively, suggesting that they are in contact at intermediate altitudes. It is estimated that they diverged from their common ancestors distributed in subtropical regions (south of Japan) during the last glacial period, expanded their distribution into the Japanese Archipelago, and came to have such a parapatric distribution (secondary contact). As their reproductive isolation is strong but incomplete, hybridisation and genetic introgression are expected at their distributional boundaries. In this study, we investigated their spatial distribution patterns along the elevation on Mt. Amagi using male morphological differences, and investigated their hybridisation status using single-nucleotide polymorphisms by MIG-seq. We found their contact zone at altitudes of 150-430 m, suggesting that their contact zone is prevalent in the parapatric area, which is in line with a previous study. Interspecific mating was predicted based on the sex ratio in the contact zone. No obvious hybrids were found, but genetic introgression was detected although it was extremely low.

Does habitat modification impact morphology, performance, and inflammatory responses in an amphibian with limited dispersal capacity (Lisssotriton helveticus)?

The environment of an organism exerts selective pressures that affect mobility, feeding, reproduction as well as predator-prey and conspecific interactions. Land use changes induced by human activities modify these selective pressures and may result in the adaptation of organisms. Amphibians are ectotherms that typically show a biphasic life cycle with an aquatic and terrestrial phase, which makes them particularly sensitive to environmental change. We studied the impact of habitat modifications on palmate newt populations in the Ile de France region across four types of habitats: urban, mixed, agricultural, and natural with at least two replicates for each habitat type. We measured the morphology of newts using callipers, quantified maximal running and swimming speed and acceleration using high-speed video recordings, and quantified the swelling of the hind limb linked to an inflammatory reaction. Our results show that in urban habitats, newts are larger and heavier and have a better body condition. Females, moreover, have a larger head in natural habitats, possibly due to diet specialisation of females during the breeding season. In mixed and agricultural habitats, newts have longer limbs and show a tendency to run faster, possibly associated with the selective pressures on movement in mixed habitats. Differences in inflammatory responses were observed between sexes but not habitat types. Overall, our results show differences in morphology and trends for differences in performance in newts living in different habitats suggesting that animals are adapting to human-induced changes in their environment.

Morphological and Phylogenetic Characterization of Trichomerium koreanum sp. nov. and Exophiala radicis Belonging to Chaetothyriales Fungi in Korea

The order Chaetothyriales encompasses black yeasts and related fungi known for their diverse morphologies, asexual reproduction, and habitat preferences. In this study, we isolated two fungal strains belonging to Chaetothyriales, designated KNUF-23-13A and KNUF-22-020, from a longhorn beetle (Cyrtoclytus capra) and soil sample, respectively, in Korea. Phylogenetic analyses based on the concatenated nucleotide sequences of the internal transcribed spacer regions and partial sequences of the large subunit (LSU) rRNA, β-tubulin (TUB2), and actin (ACT) genes revealed that the strains were grouped with strains of Trichomerium and Exophiala, respectively. For strain KNUF-23-13A, cultural and morphological differences were observed in the shape and size of mycelium between it and its phylogenetically closest species, Trichomerium lapideum CGMCC 3.17311T, supporting the novelty of this isolated species. In the case of strain KNUF-22-020, the cultural and morphological characteristics were similar to those previously reported for E. radicis P2854T. Based on morphological and phylogenetic analyses, we revealed KNUF-23-13A as a novel species, which we describe and name T. koreanum sp. nov., and KNUF-22-020 as Exophiala radicis, a previously unreported species in Korea.

Comparative morphology in the context of facial reduction: Modularity in primate, dog, and bat crania.

Biological variation in the mammalian skull is the product of a series of factors including changes in gene expression, developmental timing, and environmental pressures. When considering the diversity of extant mammalian crania, it is important to understand these mechanisms that contribute to cranial growth and in turn, how differences in cranial morphology have been attained. Various researchers, including Dr. Sue Herring, have proposed a variety of mechanisms to explain the process of cranial growth. This work has set the foundation on which modern analysis of craniofacial morphology happens today. This study focused on the analysis of modularity in three mammalian taxa, all of which exhibit facial reduction. Specifically, we examined facial reduction as a morphological phenomenon through the use of two-module and six-module modularity hypotheses. We recorded three-dimensional coordinate data for 55 cranial landmarks that allowed us to analyze differences in cranial shape in these three taxa (primates n = 88, bats n = 64, dogs n = 81). When assessing modularity within the two-module modularity hypothesis specifically, dogs exhibited the lowest levels of modularity, while bats and primates both showed a slightly more modular covariance structure. We further assessed modularity in the same sample using the Goswami six-module model, where again dogs exhibited a low degree of modularity, with bats and primates being more moderate. We then broke the sample into subsets by analyzing each morphotype separately. We hypothesized that the modularity would be more pronounced in the brachycephalic morphotype. Surprisingly, we found that in brachycephalic dogs, normocephalic dogs, brachycephalic primates, and normocephalic primates, there was a moderate degree of modularity. Brachycephalic bats had a low degree of modularity, while normocephalic bats were the most modular group observed in this study. Based on these results, it is evident that facial reduction is a complex and multifaceted phenomenon with unique morphological changes observed in each of the three taxa studied.

Geometric Morphometric Study on Distinguishing Metopic Craniosynostosis from Metopic Ridging.

Craniosynostosis, a common congenital anomaly, results from premature fusion of the cranial sutures. One of the forms of craniosynostosis is premature fusion of the metopic suture, referred to as trigonocephaly, but the diagnosis of metopic suture synostosis remains controversial. The purpose of this study was to clarify, using geometric morphometric analysis, if a metopic ridge alone observed in cases of mild trigonocephaly represents a pathological phenomenon. Three different cranial morphologies were compared among patients up to 2 years old who were categorized into the true group, the mild group, and the normal group, based on the presence or absence of specific symptoms, history of cranioplasty for trigonocephaly, or lack of any abnormality on computed tomography. Using the obtained computed tomography images, 235 anatomical landmarks and semi-landmarks were plotted on the entire cranial surface for analysis of neurocranial morphology, and the cranial shapes represented by landmarks were analyzed using geometric morphometrics. Principal components of shape variations among specimens were then computed, based on the variance-covariance matrix of the Procrustes residuals of all specimens, and statistically analyzed. The principal component analyses of the variations in endocranial shape, frontal bone shape, and occipital bone shape did not show any significant differences in cranial morphology between mild trigonocephaly and normal skulls; however, true trigonocephaly was found to differ significantly from mild trigonocephaly and normal skulls. These findings suggest that in assessments of cranial morphology, the presence of a ridge alone cannot be diagnosed as fundamentally pathological, and may represent normal morphology.

Impact of Ultrafiltration on the Physicochemical Properties of Bovine Lactoferrin: Insights into Molecular Mass, Surface Morphology, and Elemental Composition

The large-scale isolation of bovine lactoferrin (bLF) typically involves using large amounts of concentrated eluents, which might introduce impurities to the final product. Sometimes, protein pre-concentration is required for the greater accuracy of experimental results. In this research, the supplied bLF sample was subjected to additional ultrafiltration (UF) to eliminate possible small impurities, such as salts and peptides of bLF. Beforehand, the basic characterization of native bLF, including surface-charge properties and the structural sensitivity to the various pH conditions, was performed. The study aimed to evaluate the difference in molecular mass, primary structure, surface morphology, and elemental composition of the protein before and after UF. The research was provided by application of spectroscopic, spectrometric, electrophoretic, and microscopic techniques. The evident changes in the surface morphology of bLF were observed after UF, while the molecular masses of both proteins were comparable. According to MALDI-TOF/MS results, UF had a positive impact on the bLF sample representation, improving the identification parameters, such as sequence coverage and intensity coverage.

Tanycyte radial morphology and proliferation are influenced by fibroblast growth factor receptor 1 and high-fat diet.

Fibroblast growth factor receptor 1 (FGFR1) is a widely expressed, membrane-bound receptor that transduces extracellular signals from FGF ligands and cadherins, resulting in intracellular signals influencing cellular growth, proliferation, calcium, and transcription. FGF21 and FGF2 stimulate the proliferation of tanycytes, specialized radial astrocytes along the ventricle of the hypothalamus, and influence metabolism. Tanycytes are in a privileged position between the cerebrospinal fluid, the blood supply in the median eminence, and neurons within nuclei in the hypothalamus. The effect of FGFR1 signaling upon tanycyte morphology and metabolism was examined in adult mice with conditional deletion of the Fgfr1 gene using the Fgfr1flox/flox; Nestin-Cre+ line. Loss of Fgfr1 resulted in shorter β tanycytes along the medial eminence. Control Fgfr1flox/flox littermates and Fgfr1flox/flox, Nestin-Cre+ (Fgfr1 cKO) knockout mice were placed on a 1-month long high-fat diet (HFD) or a normal-fat diet (NFD), to investigate differences in body homeostasis and tanycyte morphology under an obesity inducing diet. We found that FGFR1 is a vital contributor to tanycyte morphology and quantity and that it promotes stem cell maintenance in the hypothalamus and hippocampal dentate gyrus. The Fgfr1 cKO mice developed impaired tolerance to a glucose challenge test on a HFD without gaining more weight than control mice. The combination of HFD and loss of Fgfr1 gene resulted in altered β and α tanycyte morphology, and reduced stem cell numbers along the third ventricle of the hypothalamus and hippocampus.

Friedmannodendron rodriguesiana, a new segregate of Dombeya Cav. (Dombeyoideae, Malvaceae), endemic to Rodrigues

ABSTRACT Dombeya rodriguesiana F.Friedmann is an endemic species to Rodrigues (Mascarene Archipelago, Indian Ocean). This species faces severe threats and is currently represented by at least two living individuals. We sequenced a second sample of this species to confirm that its phylogenetic placement renders Dombeya Cav. paraphyletic and, thus, its placement in Dombeya needs revision. The second sample was extracted from a cultivated clone of the last wild individual of D. rodriguesiana. Sequences from this individual for six markers (one nuclear, five plastid) were analyzed using the largest molecular dataset available on Dombeyoideae and Bayesian inference and maximum likelihood methods. Study of all known herbarium material of D. rodriguesiana, and other relevant material, allowed for a new morphological evaluation and description. Our results demonstrate that D. rodriguesiana is closely related to the Malagasy endemic genus, Andringitra Skema. We found that the unique combination of characters of a persistent epicalyx with a persistent perianth provides the synapomorphy for these two sister taxa, independent of the significant morphological differences between them (e.g. flower size, number, arrangement, sex expression). Furthermore, we describe useful field characters to differentiate D. rodriguesiana from the superficially similar D. ferruginea Cav. To maintain a meaningful classification that reflects monophyletic groups in the Dombeyoideae, we propose the establishment of a new genus and combination to accommodate this rare species.