Dietary Fiber Content Research Articles

Characterization of Functional Ingredients Extracted with Ethanol Solvents from Ponkan (Citrus reticulata) By-Products Using the Microwave Vacuum Drying Method Combined with Ultrasound-Assisted Extraction.

For this study, microwave vacuum drying (MVD) was combined with ultrasound-assisted extraction to compare the effects of different ethanol volumes on ponkan extract and to evaluate the total phenolic content (TPC), total flavonoid content (TFC), and total ascorbic acid content (TAAC). High-performance liquid chromatography with photodiode array detection (HPLC-PDA) was used to analyze the flavanone contents and antioxidant activity of ponkan (Citrus reticulata) peels. The experimental results showed that the TPC and TFC increase with ethanol volume. Ethanol extraction (75%) showed significant advantages by increasing the TPC to 17.48 mg GAE/g (DW) and the TFC to 2.96 mg QE/g (DW) of ponkan extract and also exhibited the highest antioxidant activity. The TAAC improved along with increased water content. Water extraction showed the highest content (13.07 mg VitC/100 g, DW). The hesperidin content analyzed by HPLC-PDA was 102.95-622.57 mg/100 g (DW), which was the highest among the flavanones. Then, the ethanol insoluble residue extracts were taken from the pectin with four different solvents, evaluating TPC, TFC, and antioxidant activity. The TPC, TFC, and antioxidant capacity of pectin are significantly lower than those of the peels. Combining MVD and 75% ethanol with ultrasound-assisted extraction in the pre-treatment process can effectively eliminate polyphenols, flavonoids, and other compounds, thus enabling the extraction of high-methoxyl pectin. The total dietary fiber (TDF) content of MVD ponkan by-products was 25.83%. Ponkan by-products have the potential for the future development of functional foods and supplements.

Characterization of Bubble Pearls from a Mixture of Tapioca and Glucomannan

Boba is a drink originating from Taiwan that has become popular in the Indonesian beverage industry in recent years. This drink consists of a mixture of tea with fruit or milk flavors, with the addition of tapioca-based black chewy textured balls called bubble pearls/boba. Bubble pearls made from tapioca are known to have low nutrition and fiber, so it is necessary to improve their functional characteristics by utilizing local commodities, one of which is porang. Porang (Amorphophallus oncophyllus Prain) as one of the local commodities has the potential to improve the characteristics of bubble pearls. Glucomannan flour from porang tubers has high glucomannan content, quite high fiber content, and can form a gel. This study aims to determine the characteristics of bubble pearl products with the addition of glucomannan flour and to determine the optimum percentage of glucomannan flour and tapioca. The formulation of bubble pearls was carried out using the Simplex Lattice Design method and their physical, chemical, and hedonic characteristics were analyzed. The optimization parameters included water absorption capacity, gumminess level, and dietary fiber content. The optimum formula produced by the Simplex Lattice Design method is in formula 2, bubble pearls with the addition of 25% glucomannan flour which has the highest desirability value of 0.862. Formula 2 consists of a water absorption capacity of 37.08%, a gumminess level of 45.72 gf, and a dietary fiber content of 5.65%. The hedonic values are 5.73 for color (slightly like), 5.7 for aroma (slightly like), 4.8 for hardness (neutral), 4.73 for chewiness (neutral), 5.23 for taste (slightly like), and 5.4 overall (slightly like). Additionally, the water content is 59.97% and the ash content is 1.41%.

X-ray irradiation maintains soluble sugar content and regulates expression of genes related to sugar metabolism of figs (Ficus carica L. ‘Siluhongyu’)

Fig is susceptible to lose fruit sensory quality due to its delicate skin and the natural bottom fruit pore. X-ray irradiation is an effective strategy for fruit preservation. This study investigated appearance and basic quality attributes of ‘Siluhongyu’ fig and evaluated the effects of X-ray on fig sugar metabolism and relative expression of genes. Results indicated that ‘Siluhongyu’ fig could be accepted by consumers with suitable overall dimension, soluble sugar, titratable acidity (TA), soluble protein, and dietary fiber contents. Sugar metabolism assay revealed that 3.0 kGy X-ray effectively inhibited the decline of glucose, fructose and sucrose contents. The starch degradation and the increase of amylase activity of figs were alleviated. In addition, the neutral invertase (NI), sucrose phosphate synthase (SPS), sucrose synthase (SS) and phosphofructokinase (PFK) activities in figs were activated by 3.0 kGy X-ray. About 22 % higher hexokinase (HK) activity was found in 3.0 kGy irradiated fruit than non-irradiated figs. Furthermore, 3.0 kGy X-ray upregulated gene expressions of NI, SS, HK, and PFK. The study proves that 3.0 kGy X-ray could be used as the feasible preservation means to regulate sugar metabolism and maintain quality of figs.

Nutritional components of 5 potatoes in Anqing City in 2021

To analyze the nutrient composition and nutritional value evaluation of 5 potatoes in Anqing City. According to the requirements of the Technical Manual for Food Composition Monitoring Projects, 5 types of potato samples were collected from Anqing City, Anhui Province. National standard detection method were used to determine the nutritional components such as water, ash, protein, fat, dietary fiber, sugar, minerals, vitamins, and amino acids in the samples. The index of nutritional quality(INQ) method was used to evaluate proteins, vitamins, and minerals, and the amino acid scoring standard mode(FAO/WHO mode) was used to evaluate the nutritional value of amino acids. Among the 5 types of potatoes, purple potato had the highest protein(2.3 g/100 g) and dietary fiber content(3.6 g/100 g). Sweet potato(red) had the highest carotene content(4003 μg/100 g), sweet potato(white) had the highest content of vitamin C(15.4 mg/100 g). Sugar in potatoes mainly existed in three forms: fructose, glucose, and sucrose; Purple potatoes had the highest levels of calcium(47 mg/100 g) and phosphorus(74 mg/100 g), respectively. Potatoes(white) had the highest content of potassium(401 mg/100 g), while sweet potatoes(red) had the highest content of magnesium(31 mg/100 g). Sodium(104.0 mg/100 g), iron(0.9 mg/100 g), copper(0.17 mg/100 g), and manganese(0.40 mg/100 g) had the highest content in sweet potatoes(white). The Na/K ratio range of the 5 potato varieties was 0.003-0.456, and the INQ of phosphorus, potassium, magnesium, copper, and manganese were greater than 1. The detection result of 5 potatoes all contain 18 amino acids, and aspartic acid was the highest. The amino acid score(AAS) was 0.29-1.35, and the ratio coefficient(RC) was 0.47-1.69. The 5 types of potatoes are rich in dietary fiber, vitamin C and minerals, and belong to the high potassium and low sodium type of food. Potatoes can meet the daily needs of the human body for phosphorus, potassium, magnesium copper, and manganese elements. Lysine is rich in content and can be used as a nutritional supplement for grains. The AAS score and RC are close to 1, and the AAS evaluation mode is closer to the human amino acid composition mode, which can meet the daily needs of the human body for this essential amino acid.

Physical Treatments Modified the Functionality of Carrot Pomace.

This study addressed the critical issue of food waste, particularly focusing on carrot pomace, a by-product of carrot juice production, and its potential reutilization. Carrot pomace, characterized by high dietary fiber content, presents a sustainable opportunity to enhance the functional properties of food products. The effects of physical pretreatments-high shearing (HS), hydraulic pressing (HP), and their combination (HSHP)-alongside two drying methods (freeze-drying and dehydration) on the functional, chemical, and physical properties of carrot pomace were explored. The results indicated significant enhancements in water-holding capacity, fat-binding capacity, and swelling capacity, particularly with freeze-drying. Freeze-dried pomace retained up to 33% more carotenoids and demonstrated an increase of up to 22% in water-holding capacity compared to dehydrated samples. Freeze-dried pomace demonstrated an increase of up to 194% in fat-binding capacity compared to dehydrated samples. Furthermore, HSHP pretreatment notably increased the swelling capacity of both freeze-dried (54%) and dehydrated pomace (35%) compared to pomace without pretreatments. Freeze-drying can enhance the functional properties of dried carrot pomace and preserve more carotenoids. This presents an innovative way for vegetable juice processors to repurpose their processing by-products as functional food ingredients, which can help reduce food waste and improve the dietary fiber content and sustainability of food products.

Ice cream cone fortified with spent coffee ground: Chemical composition, quality and sensory characteristics, and in vitro starch digestibility

The objective of the study was to evaluate the effect of the incorporation of spent coffee grounds in ice cream cones on the quality, sensory characteristics, and in vitro starch digestibility. The incorporation of spent coffee grounds in ice cream cones increased the content of dietary fiber and phenolic compounds. However, the quality and texture characteristics decreased with the addition of spent coffee grounds. The in vitro starch digestibility decreased significantly, resulting in a significant increase in resistant starch content. Fitting starch digestibility using the LOS-plot model revealed the presence of two sequential first-order digestion rates. Sensory analysis revealed that the panelists well accepted ice cream cones fortified with spent coffee grounds. The results suggest that spent coffee grounds are a potential ingredient for the formulation of food matrices with reduced starch digestibility, which contributes to the prevention of chronic degenerative diseases such as type II diabetes.

Dynamic high pressure microfluidization modified oat dietary fiber: Texture modulation and its mechanistic in whole grain oat milk

Oat dietary fiber (ODF) could product some undesirable textures such as rough and thick when added to food products, resulting the waste of resources. In this study, dynamic high pressure microfluidization (DHPM) was used to treat ODF in different pressures, and ODF was backfilled into whole grain oat milk (WOM) to investigate the efficiency of DHPM in improving the undesirable taste from ODF. The physicochemical properties and the microstructure of the DHPM-treated ODF were also determined to investigate the modification mechanism. The results showed that the WOM with DHPM-treated ODF conferred lower particle size (D[90] decreasing by 22.80%–51.35%), firmness (decreasing by 0.08%–9.84%), apparent viscosity and coefficient of friction, especially 120 and 150 MPa. Meanwhile, the samples with DHPM had higher sensory scores such as particles detected (swallowing and after swallowing increasing by 38.10%–85.71% and 29.17%–62.50% respectively), smoothness (increasing by 6.9%–27.59%), and mouth-coating, indicating that DHPM treatment could improve the undesirable texture brought by ODF. In addition, DHPM treatment reduced the particle size and insoluble dietary fiber content and fragmented microstructure of ODF, it may weaken the particles detected and improve the smooth taste. The consistency coefficient of ODF decreased from 0.0091 (0 MPa) to 0.0038 (150 MPa), which could be related to the improvement of texture flow and mouth-coating. In conclusion, WOM with DHPM-treatment ODF improved the undesirable texture such as roughness and stickiness, possibly associated with the ability of DHPM to alter the particle size, apparent viscosity and microstructure of ODF. This study provided the method of modification and utilization of ODF, and provided the idea and feasible solution for preparation of WOM.

Vegetable Recipe Variations in Urban and Periurban Bangladesh: Recipe Survey, Recipe Standardization, And Nutrient Analysis

Recipe variation has social, economic, geographical, cultural, and other roots. The Analysis of each recipe’s composition is not plausible from a chemical as well as an economic point of view. Instead, a standardized recipe from a set of similar recipes could be ideal for cooking and chemical analysis of the nutrient composition of cooked recipes. This type of data has been found to be scanty in conventional food composition tables (FCT) across the globe. Recipe calculation from raw ingredients has always been problematic because cooking is regarded as an unpredictable process on every occasion. Therefore, analysis of cooked recipes is preferred for FCTs which are used for more authentic and accurate in menu planning for individual or community health purposes. The present study seeks to partially fill the information gap on compositional data for vegetable and leafy vegetable recipes consumed by the lower to middle-income urban and peri-urban households of Bangladesh because they have been observed to be the main consumer of these recipes. The study was conducted into three phases. In phase I, a recipe survey was conducted among purposely selected housewives (n=100) representing Dhaka (n=33), Rangpur (n=37), Rajshahi (n=18) and Chattogram (n=12) divisions. In phase II, 10 selected homemade vegetable and leafy vegetable recipes were selected and standardized from the most cited recipe list obtained from consecutive recipe surveys. In phase III, chemical analyses for proximate nutrients were carried out followed by compilation of vitamin and mineral values from local and global food composition databases. The result revealed that the Moisture, Ash, Protein, Fat, Total Dietary Fiber and Available Carbohydrate content (g/100 g) and Calorie of the samples ranged from 71.57-83.68%, 1.30-4.94%, 1.17-5.86%, 0.20-9.18%, 2.63-7.28%, 1.43-14.66%, and 64.94 to 126.28 Kcal respectively. Method validation and analytical quality assurance program was carried out along with all standard operating procedure (SOP) to ensure quality data generation. Therefore, the data obtained in this study can be taken as reliable data which will enrich the food composition database of Bangladesh. Bioresearch Commu. 10(2): 1565-1572, 2024 (July)

Deciphering the genetic architecture of β-glucan content in oats (Avena sativa L.) through QTL mapping

Oat is a cereal grain grown for human and animal nutrition. It is known for its high dietary fibre content, phytochemicals, and nutritional value. The primary component of oat fibre is β-glucan, a group of polysaccharides comprising mixed-linkage (1,3) (1,4)-D-glucose units. The β-glucan concentrations of oat cultivars usually range from 3 to 6% and are considered a polygenic trait controlled by multiple genes with additive effects. The primary goal of this study was to identify quantitative trait loci (QTLs) for β-glucan content. Two contrasting parents for β-glucan content, OL10 (5.8%) and OL11 (0.8%), were selected from 91 germplasm lines, and an F2:4 mapping population was generated for QTL mapping. Five genotypes with the highest levels of β-glucan content were observed. The QTLs affecting β-glucan content were identified using QTL cartographer, employing single marker analysis (SMA) and composite interval mapping (CIM). Two putative QTL regions were identified, one on linkage group (LG) 1 and the other on LG 4, with LOD (logarithm of the odds) scores of 3.7 and 4.3, respectively, explaining 31 and 33% of the phenotypic variation. The information generated is important in identifying the genomic regions responsible for β-glucan content in oats.

Determination of high-intensity sweeteners in bakery products marketed in Brazil and dietary exposure assessment

Bakery products, including biscuits, cakes and breads, generally present a high content of simple sugars of rapid absorption, high fat content and low amount of dietary fiber, which make them highly caloric foods. Although sucrose is a very important ingredient in bakery products for its preservation characteristics and a significant source of energy, there is a growing interest in replacing this sugar with alternative substances, such as high-intensity sweeteners (HIS) that provide sweetness with no or low calories. In Brazil, there is no data on the use of HIS in this class of food. Therefore, the objective of this study was to evaluate the presence of HIS in baked food commercially available in the country and estimate the dietary exposure to these food additives. For that, an analytical method was established for the simultaneous determination of nine HIS in bakery products using ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC–MS/MS). Sample preparation steps were required based on mechanical kneading for homogenization, hexane extraction of fats, dilution in mobile phase and vortex homogenization, prior to injection into the system. The results obtained during validation showed that coefficients of variation (CV%) for precision were lower than 13.8% and the accuracy was between 91.6% and 109.1%. Aspartame, acesulfame potassium, sodium cyclamate, saccharin, sucralose and steviol glycosides were found in the samples, used alone or in combinations of up five substances. Steviol glycosides were the most found HIS in biscuit samples, while sucralose was the most common sweetener in cake and bread samples. Analysis of product labels revealed only three different claims, .i.e. ‘no sugar’, ‘no added sugar’ and ‘zero sugar’, with the latter being found in 70% of the samples. Exposure to HIS through the consumption of bakery products estimated per eating occasion showed no concerns regarding toxicological risk.

Particle size reduction influences starch and protein functionality, and nutritional quality of stone milled whole wheat flour from hard red spring wheat

Flour particle size (PS) distribution plays a crucial role in determining the functional properties of starch, protein, and influences the nutritional properties, which ultimately is reflected in the end-product quality. For stone-milled whole wheat flour (WWF) bakers often prefer finer PS for improved color and texture, despite this can sometimes negatively affect other quality aspects. Therefore, understanding the contribution of PS reduction on the functional properties of stone-milled WWF is crucial. This study investigated Hard Red Spring (HRS) WWF of which the mean PS was reduced from 151 μm to 117 μm, the possible finest PS by a “Kombi mill type A 500 MSM” stone mill. PS reduction increased starch damage from 6.58% to 6.71%. Also, the amylose content reduced from 31.7% to 29.4%. However, an increase in syneresis, solubility, oil-holding capacity, and peak viscosity was observed. Glutopeak and wet gluten showed an increased gluten strength. Glutenin/gliadin, polymeric/monomeric protein ratios, and percentage of unextractable polymeric protein were increased by 2.10%, 4.11%, and 4.55%, respectively, indicating increased availability of proteins with relatively larger molecular sizes by PS reduction. The relative proportion of glutenin and gliadin subgroups were also changed. Dietary fiber and resistant starch contents were found to be lower. However, the reduction in phytic acid and FODMAPs is considered beneficial. PS reduction ultimately improved bread loaf volume and crumb structure. Overall, PS reduction of WWF by stone-milling brought positive changes to several functional properties of protein and starch and positively improved the dough rheology and end-product quality.

Effects of airflow superfine pulverization on the structure, functional properties, and flavor quality of wheat bran.

Wheat bran (WB) is a byproduct of refined wheat flour production with poor edible taste and low economic value. Herein, the WB was micronized via airflow superfine pulverization (ASP), and the effects of the ASP conditions on its particle size, nutritive compositions, whiteness, hydration characteristics, moisture distribution, microstructure, cation exchange capacity, volatile flavor components, and other characteristics were investigated. Reducing the rotational speed of the ASP screw and increasing the number of pulverizations significantly decreased the median particle size Dx(50) of WB to a minimum of 12.97 ± 0.19 μm (P < 0.05), increased the soluble dietary fiber content from 55.05 ± 2.94 to 106.86 ± 1.60 mg g-1, and improved the whiteness and water solubility index. In addition, the water holding capacity and oil holding capacity were significantly reduced (P < 0.05), while the cation exchange and swelling capacities first increased and then decreased. Up to about 70% of water in WB exists as bound water. As the Dx(50) of WB decreased, the content of bound and immobile water increased, while the free water decreased from 14.37 ± 1.21% to 7.59 ± 1.03%. Furthermore, WB was micronized and the particles became smaller and more evenly distributed. Using gas chromatography-ion mobility spectrometry, a total of 37 volatile compounds in micronized WB (including 10 aldehydes, 9 esters, 7 alcohols, and several acids, furans, ethers, aldehydes, esters, and alcohols) were identified as the main volatile compounds of WB. Collectively, ASP improved the physicochemical properties of WB. This study provides theoretical references for the use of ASP to improve the utilization and edibility of WB. © 2024 Society of Chemical Industry.

A Comparison of Phenolic, Flavonoid, and Amino Acid Compositions and In Vitro Antioxidant and Neuroprotective Activities in Thai Plant Protein Extracts.

The leaves of mulberry, Azolla spp., sunflower sprouts, cashew nut, and mung bean are considered rich sources of plant protein with high levels of branched-chain amino acids. Furthermore, they contain beneficial phytochemicals such as antioxidants and anti-inflammatory agents. Additionally, there are reports suggesting that an adequate consumption of amino acids can reduce nerve cell damage, delay the onset of memory impairment, and improve sleep quality. In this study, protein isolates were prepared from the leaves of mulberry, Azolla spp., sunflower sprouts, cashew nut, and mung bean. The amino acid profile, dietary fiber content, phenolic content, and flavonoid content were evaluated. Pharmacological properties, such as antioxidant, anticholinesterase, monoamine oxidase, and γ-aminobutyric acid transaminase (GABA-T) activities, were also assessed. This study found that concentrated protein from mung beans has a higher quantity of essential amino acids (52,161 mg/100 g protein) compared to concentrated protein from sunflower sprouts (47,386 mg/100 g protein), Azolla spp. (42,097 mg/100 g protein), cashew nut (26,710 mg/100 g protein), and mulberry leaves (8931 mg/100 g protein). The dietary fiber content ranged from 0.90% to 3.24%, while the phenolic content and flavonoid content ranged from 0.25 to 2.29 mg/g and 0.01 to 2.01 mg/g of sample, respectively. Sunflower sprout protein isolates exhibited the highest levels of dietary fiber (3.24%), phenolic content (2.292 ± 0.082 mg of GAE/g), and flavonoids (2.014 mg quercetin/g of sample). The biological efficacy evaluation found that concentrated protein extract from sunflower sprouts has the highest antioxidant activity; the percentages of inhibition of 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) and 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) radical were 20.503 ± 0.288% and 18.496 ± 0.105%, respectively. Five plant-based proteins exhibited a potent inhibition of acetylcholinesterase (AChE) enzyme activity, monoamine oxidase (MAO) inhibition, and GABA-T ranging from 3.42% to 24.62%, 6.14% to 20.16%, and 2.03% to 21.99%, respectively. These findings suggest that these plant protein extracts can be used as natural resources for developing food supplements with neuroprotective activity.

A cooked pasta matrix high in dietary fiber, polyphenols, and antioxidant capacity using decocted Hibiscus calyces

The objective of this work was to produce a gluten-containing food matrix (pasta) rich in dietary fiber (DF), polyphenols, and antioxidant activity, through partial substitution with a dry flour from decocted Hibiscus sabdariffa L. calyces. The food matrix was made by mixing semolina (75%) and decocted calyces flour (25%) (S75–HF25), and its proximate composition, polyphenols content, antioxidant capacity, and starch hydrolysis rate were evaluated. The dietary fiber (DF) content (18.7 g/100g, dry basis, db) in the S75–HF25 pasta was markedly higher than in semolina control pasta (5.0 g/100g, db). Cooking the S75–HF25 pasta decreased the extractable polyphenols content and antioxidant capacity measured with DPPH, while enhancing the ABTS + antioxidant value. The cooked pasta showed an “as eaten” DF content of 34.7 g/100g, which was higher than in semolina pasta (6.7 g/100g). The starch hydrolysis rate of the composite pasta was reduced compared to the semolina pasta. The resistant starch content in the composite pasta was around 60% higher than the semolina pasta. The high DF content in the decocted calyces of Hibiscus sabdariffa L. helps to retain the polyphenol content and antioxidant capacity in the cooked pasta food matrix.

Evaluation of Cookies Enriched with Osmodehydrated Wild Garlic from Nutritional and Sensory Aspects.

In the present study, the nutritional and sensory properties of spelt cookies without wild garlic, cookies with fresh wild garlic, cookies with osmodehydrated wild garlic in sugar beet molasses, and cookies with osmodehydrated wild garlic in an aqueous solution of sucrose and salt were evaluated and compared. The tested cookie samples were characterized in terms of total antioxidative activity, the total content of phenols, flavonoids, and thiosulfates, the presence of dominant phenols, the content of betaine and dietary fiber, antioxidant activity after in vitro digestion, and sensory attributes for appearance, taste, smell, and texture. The results proved that the addition of wild garlic leaves osmodehydrated in molasses provided the cookies with the best nutritional and bioactive properties: 1.75 times higher total phenols content, 2.4 times higher total flavonoids content, 1.52 times higher total thiosulfates content, and 1.56 times higher betaine content, and a total quality increase of 54% compared to the control cookies. The cookies enriched with osmodehydrated wild garlic in molasses were rated as pleasant and acceptable, but also more complex compared to other cookies. The production of this nutritionally and sensory-improved cookie would contribute to expanding the assortment of flour confectionery products, especially for consumers who care about health and nutrition.

Effect of Air Classification and Enzymatic and Microbial Bioprocessing on Defatted Durum Wheat Germ: Characterization and Use as Bread Ingredient.

Its high dietary fiber and protein contents and nutritional quality make defatted wheat germ (DWG) a valuable cereal by-product, yet its negative impact on food structure limits its use as a food ingredient. In this research, DWG underwent air classification, which identified two fractions with high fiber (HF) and low fiber/high protein (LF) contents, and a bioprocessing protocol, involving treatment with xylanase and fermentation with selected lactic acid bacterial strains. The degree of proteolysis was evaluated through electrophoretic and chromatographic techniques, revealing differences among fractions and bioprocessing options. Fermentation led to a significant increase in free amino acids (up to 6 g/kg), further enhanced by the combination with xylanase. When HF was used as an ingredient in bread making, the fiber content of the resulting bread exceeded 3.6 g/100 g, thus reaching the threshold required to make a "source of fiber" claim according to Regulation EC No.1924/2006. Meanwhile, all breads could be labeled a "source of protein" since up to 13% of the energy was provided by proteins. Overall, bioprocessed ingredients lowered the glycemic index (84 vs. 89) and increased protein digestibility (80 vs. 63%) compared to control breads. Technological and sensory analysis showed that the enzymatic treatment combined with fermentation also conferred a darker and more pleasant color to the bread crust, as well as better crumb porosity and elasticity.

Effect of fermentation time on dietary fiber content, total sugar content, and organoleptic quality of Jali Tape (Coix Lacryma-Jobi L)

Effect of fermentation time on dietary fiber content, total sugar content, and organoleptic quality of Jali Tape (Coix Lacryma-Jobi L)

Nutritional Advantages and Opportunities for Its Processing of Finger Millet (Eleusine coracana L.): A Comprehensive Review

Finger millet (Eleusine coracana L.) stands out as a highly nutritious yet underutilized grain among the millets. Despite its substantial health benefits, finger millet remains one of the least consumed foods globally. With the world's population growing at an unprecedented rate, addressing food security and malnutrition is a critical challenge. UNICEF reports indicate that nearly 2 billion people suffer from hidden hunger, and one in five children under five years old experience stunted growth due to malnutrition. Finger millet offers a promising solution to these issues due to its rich nutritional profile, which surpasses that of many common cereals. This review comprehensively examines the nutritional advantages of finger millet, highlighting its high content of calcium, iron, dietary fiber, and essential amino acids. Additionally, finger millet is a rich source of antioxidants and has a low glycemic index, making it beneficial for managing diabetes and other metabolic disorders. The review also explores various opportunities for processing finger millet to enhance its appeal and consumption. Processing techniques such as malting, fermentation, and extrusion can improve the bioavailability of nutrients and create diverse, palatable food products. By leveraging modern processing technologies, finger millet can be transformed into a staple food that addresses nutritional deficiencies and contributes to global food security. This review aims to underscore the importance of finger millet in combating malnutrition and promoting sustainable food systems. Increased awareness and research into finger millet's nutritional benefits and processing opportunities can pave the way for its broader adoption and integration into daily diets, ultimately contributing to better health outcomes worldwide.

Texture profile analysis of heat-processed tender jackfruit (Artocarpus heterophyllus Lam.) and its potential use as a meat analog

Thermal processing is the most efficient and economical technique for the long-term preservation of tender jackfruit in ready-to-cook form on a commercial-scale. The present study investigated the effect of boiling (80, 90 and 100 &amp;deg;C for 5, 10 and 15 min) and steaming processing (121 &amp;deg;C, 1.5 atm for 5, 10 and 20 min) on the texture profile of tender jackfruit sections (core, cortex and perianth). In addition, the thermal conditions to process tender jackfruit sections were compared with cooked animal meats as references measuring the texture profile. Finally, an edible formulation using processed tender jackfruit as a meat analog was performed and characterized. The hardness, chewability and shear force values of tender jackfruit sections decreased with the highest temperature and processing time; however, core section exhibited the highest texture values followed by perianth and cortex. All jackfruit sections exhibited similar texture parameters to meat references when they were processed from 90 to 100 &amp;deg;C for 5&amp;ndash;15 min by boiling process and 121 &amp;deg;C for 5&amp;ndash;10 min by steaming process. The sterilized edible formulation exhibited good content of ashes, total protein and dietary fiber; as well as a high digestibility (88.92%). Moreover, this formulation conserved soluble phenols with antioxidant capacity, without microbial growth during 15 days of storage at 25 &amp;deg;C and with high sensorial acceptation. According to this, whole tender jackfruit has a potential use as an analog of different animal meats.

Influence of fermentation conditions by Rhizopus oryzae on the release of phenolic compounds, composition, and properties of brewer's spent grain

This study aimed to (i) assess the influence of moisture and particle size on the release of phenolic compounds from brewer's spent grain by Rhizopus oryzae fermentation, (ii) determine the release kinetics of these compounds, and (iii) characterize brewer's spent grain before (BSG) and after (BSGF) fermentation. BSG and BSGF were evaluated for chemical composition, phenolic profile, and antioxidant and technological properties. The release of methanol-soluble phenolic compounds (MSPC) was influenced by both moisture and particle size, with the highest value (300.25 mg 100 g−1) obtained at 71% moisture and a 50:50 mixture of particles measuring 0.50 and 0.30 mm. This maximum MSPC content was obtained after 48 h of fermentation, being 761% higher than that contained in BSG. Catechin was the major component of the MSPC fraction (37.08 mg 100 g−1), whereas ferulic acid (36.38 mg 100 g−1) was the predominant component of the bound phenolic fraction. BSGF showed higher ash (8%) and protein (17%) content, but lower soluble dietary fiber (10%) and lipid content (67%) than BSG. Fermentation altered the protein fractions of the residue, increasing the proportion of albumin and globulin and decreasing that of prolamin and glutelin. These changes resulted in improved technological properties (oil absorption, water solubility, and swelling volume) and antioxidant activity. It is concluded that the proposed fermentation method can contribute to expanding the utilization of BSG, thereby diversifying its applications, and adding value to the production chain.