Dielectric Environment Research Articles

Local Manipulation of the Energy Levels of 2D TMDCs on the Microscale Level via Microprinted Self‐Assembled Monolayers

Abstract2D transition metal dichalcogenides (TMDCs) are atomically‐thick semiconductors with great potential for next‐generation optoelectronic applications, such as transistors and sensors. Their large surface‐to‐volume ratio makes them energy‐efficient but also extremely sensitive to the physical‐chemical surroundings. The latter must be carefully considered when predicting the electronic behavior, such as their energy level alignment, which ultimately affects the charge carrier injection and transport in devices. Here, local doping is demonstrated and thus adjusting the opto‐electronic properties of monolayer TMDCs (WSe2 and MoS2) by chemically engineering the surface of the supporting substrate. This is achieved by decorating the substrate by microcontact printing with patterns of two different self‐assembled monolayers (SAMs). The SAMs posses distinct molecular dipoles and dielectric constants, significantly influencing the TMDCs electronic and optical properties. By analyzing (on various substrtates), it is confirmed that these effects arise solely from the interaction between SAMs and TMDCs. Understanding the diverse dielectric environments experienced by TMDCs allows for a correlation between electronic and optical behaviours. The changes primarily involve alteration in the electronic band gap width, which can be calculated using the Schottky‐Mott rule, incorporating the dielectric screening of the TMDCs surroundings. This knowledge enables accurate prediction of the (opto‐)electronic behavior of monolayer TMDCs for advanced device design.

Engineering Substrate-Mediated Localized Surface Plasmons in Gold Nanodiscs

A variety of nanostructures capable of generating strong local electromagnetic fields (hot spots) in interaction with radiation have been under intensive investigation towards plasmonic applications in surface-enhanced Raman scattering (SERS), biosensing, broadband absorbers, thermophotovoltaics, photocatalysis, etc. In many cases, these nanostructures are formed on a surface or embedded into a near-surface layer of the dielectric substrate, making some part of the field dissipate into the bulk and not contribute to the desired plasmonic functionality. To reduce such losses, the interface between the metallic nanostructures and the dielectric environment should be engineered. In the current work, Au nanodiscs are fabricated on Si posts of very small diameter (pin-shaped structures), enabling them to decouple the strong optical near fields localized at the nanodiscs from the bulk Si substrate. The Si post diameter is optimized by adjusting the gas flow rates in reactive-ion etching, resulting in a minimum post diameter of 20 nm at the nanodisc interface. The effect of this diameter on the localized surface plasmon resonance of the nanodisc is investigated with linear optical spectroscopic measurements, where a significant spectral blue shift of the resonance band is noticed compared to similar discs formed on bulk Si surface. The experimental results are compared with modelling where a 3-fold increase in the electric field enhancement is demonstrated. The fabricated pin-shaped nanostructures are tested in SERS measurements showing a significant increase in the enhancement factor in the order of 106. Thus, this work suggests a way of engineering 3D morphology to tune the substrate influence on the plasmonic properties of nanostructures and to develop efficient nanofabrication technologies.

Plasmonic Nanomaterials in Dark Field Sensing Systems.

Plasma nanoparticles offer promise in data storage, biosensing, optical imaging, photoelectric integration, etc. This review highlights the local surface plasmon resonance (LSPR) excitation mechanism of plasmonic nanoprobes and its critical significance in the control of dark-field sensing, as well as three main sensing strategies based on plasmonic nanomaterial dielectric environment modification, electromagnetic coupling, and charge transfer. This review then describes the component materials of plasmonic nanoprobes based on gold, silver, and other noble metals, as well as their applications. According to this summary, researchers raised the LSPR performance of composite plasmonic nanomaterials by combining noble metals with other metals or oxides and using them in process analysis and quantitative detection.

Impacts of dielectric screening on the luminescence of monolayer WSe2

Single layers of transition metal dichalcogenides (TMDCs), such as WSe2 have gathered increasing attention due to their intense electron–hole interactions, being considered promising candidates for developing novel optical applications. Within the few-layer regime, these systems become highly sensitive to the surrounding environment, enabling the possibility of using a proper substrate to tune desired aspects of these atomically-thin semiconductors. In this scenario, the dielectric environment provided by the substrates exerts significant influence on electronic and optical properties of these layered materials, affecting the electronic band-gap and the exciton binding energy. However, the corresponding effect on the luminescence of TMDCs is still under discussion. To elucidate these impacts, we used a broad set of materials as substrates for single-layers of WSe2, enabling the observation of these effects over a wide range of electrical permittivities. Our results demonstrate that an increasing permittivity induces a systematic red-shift of the optical band-gap of WSe2, intrinsically related to a considerable reduction of the luminescence intensity. Moreover, we annealed the samples to ensure a tight coupling between WSe2 and its substrates, reducing the effect of undesired adsorbates trapped in the interface. Ultimately, our findings reveal how critical the annealing temperature can be, indicating that above a certain threshold, the heating treatment can induce adverse impacts on the luminescence. Furthermore, our conclusions highlight the influence the dielectric properties of the substrate have on the luminescence of WSe2, showing that a low electrical permittivity favours preserving the native properties of the adjacent monolayer.

Coulomb engineering of two-dimensional Mott materials

Two-dimensional materials can be strongly influenced by their surroundings. A dielectric environment screens and reduces the Coulomb interaction between electrons in the two-dimensional material. Since in Mott materials the Coulomb interaction is responsible for the insulating state, manipulating the dielectric screening provides direct control over Mottness. Our many-body calculations reveal the spectroscopic fingerprints of such Coulomb engineering: we demonstrate eV-scale changes to the position of the Hubbard bands and show a Coulomb engineered insulator-to-metal transition. Based on our proof-of-principle calculations, we discuss the (feasible) conditions under which our scenario of Coulomb engineering of Mott materials can be realized experimentally.

Adaptive triple-fed antenna and thinned RF-chip integration into ultra thin flexible polymer foil

AbstractAttaching a wireless transmission system comprising a radio frequency (RF)-chip and a dipole antenna to dielectric material of largely different permittivity leads to strong variation of the antenna feed impedance. Due to the severe impedance mismatch between the RF-chip and the antenna, the performance of the system may deteriorate drastically. The proposed antenna provides three feed points, which show respective feed-point match to 100 Ohm balanced feeds for three different dielectric environments (free-space and half-spaces of permittivity 4 and 42, respectively). Thereby, the RF-chip incorporates three 100 Ohm balanced output ports that are connected to the antenna from whom only one can be selected to provide the output signal. The respective other two output ports are shorted by an internal switching circuit that is controlled by external DC voltages. The measurement of the reflection coefficient of the stand-alone antenna and the chip agree well with the simulations, allowing to interconnect these two components. Further, the radiation pattern of the whole system is measured for two different scenarios showing good functionalities.

Energy transport and relaxation of phonon polaritons in two-dimensional polar crystals

Energy transport and relaxation of phonon polaritons (PhPs) are studied, based on a macroscopic phonon model, for atomic layers of hexagonal boron nitride (hBN) and transition metal dichalcogenides (TMDs). The velocity of the energy flow (energy velocity) is derived from the energy flow and density; it equals the group velocity, similar to the results of bulk and surface PhPs. In electrostatic approximation, valid once the frequency is slightly above ω0 (e.g., ω>1.002ω0∼224cm−1 for pentalayer MoTe2; ω0 is the zone-center optical-phonon frequency), simple formulas are obtained for the energy velocity and relaxation rate (ERR). While the energy velocity increases proportionally with the number of layers N, the ERR is independent of N. The ERR equals the phonon damping rate in freestanding layers, but it is slightly decreased in SiO2-supported layers and has a non-monotonic frequency dependence (the decrease is smaller than 5.4% for hBN layers and negligible for TMD layers). The energy velocity decreases significantly with frequency in both freestanding and supported layers. Near ω0, however, the PhP properties should be calculated rigorously, and they all depend on N as well as the dielectric environment. High-frequency screening should be included to study the energy transport. The energy velocity can be engineered by varying N and the dielectric environment; it also can be tuned together with the propagation quality factor by the incident light frequency. The MoTe2 layers should be exploited for a far-infrared PhP material (wavelengths 43–45 μm); this is just an example of application of the proposed model to the considered materials.

Hybrid functionals for periodic systems in the density functional tight-binding method

Screened range-separated hybrid (SRSH) functionals within generalized Kohn-Sham density functional theory (GKS-DFT) have been shown to restore a general $1/(r\ensuremath{\varepsilon})$ asymptotic decay of the electrostatic interaction in dielectric environments. Major achievements of SRSH include an improved description of optical properties of solids and correct prediction of polarization-induced fundamental gap renormalization in molecular crystals. The density functional tight-binding method (DFTB) is an approximate DFT that bridges the gap between first-principles methods and empirical electronic structure schemes. While purely long-range corrected RSH are already accessible within DFTB for molecular systems, this work generalizes the theoretical foundation to also include screened range-separated hybrids, with conventional pure hybrid functionals as a special case. The presented formulation and implementation is also valid for periodic boundary conditions (PBC) beyond the $\mathrm{\ensuremath{\Gamma}}$ point. To treat periodic Fock exchange and its integrable singularity in reciprocal space, we resort to techniques successfully employed by DFT, in particular a truncated Coulomb operator and the minimum image convention. Starting from the first-principles Hartree-Fock operator, we derive suitable expressions for the DFTB method, using standard integral approximations and their efficient implementation in the $\mathrm{dftb}+$ software package. Convergence behavior is investigated and demonstrated for the polyacene series as well as two- and three-dimensional materials. Benzene and pentacene molecular and crystalline systems show the correct polarization-induced gap renormalization by SRSH-DFTB at heavily reduced computational cost compared to first-principles methods.

The Key Role of Non-Local Screening in the Environment-Insensitive Exciton Fine Structures of Transition-Metal Dichalcogenide Monolayers.

In this work, we present a comprehensive theoretical and computational investigation of exciton fine structures of WSe2-monolayers, one of the best-known two-dimensional (2D) transition-metal dichalcogenides (TMDs), in various dielectric-layered environments by solving the first-principles-based Bethe-Salpeter equation. While the physical and electronic properties of atomically thin nanomaterials are normally sensitive to the variation of the surrounding environment, our studies reveal that the influence of the dielectric environment on the exciton fine structures of TMD-MLs is surprisingly limited. We point out that the non-locality of Coulomb screening plays a key role in suppressing the dielectric environment factor and drastically shrinking the fine structure splittings between bright exciton (BX) states and various dark-exciton (DX) states of TMD-MLs. The intriguing non-locality of screening in 2D materials can be manifested by the measurable non-linear correlation between the BX-DX splittings and exciton-binding energies by varying the surrounding dielectric environments. The revealed environment-insensitive exciton fine structures of TMD-ML suggest the robustness of prospective dark-exciton-based optoelectronics against the inevitable variation of the inhomogeneous dielectric environment.

Polymer complexation: Partially ionizable asymmetric polyelectrolytes.

Theories of bulk coacervation of oppositely charged polyelectrolytes (PE) obscure single molecule level thermodynamic details, considered significant for coacervate equilibrium, whereas simulations account for only pairwise Coulomb interaction. Also, studies of effects of asymmetry on PE complexation are rare compared to symmetric PEs. We develop a theoretical model, accounting for all entropic and enthalpic contributions at the molecular level, and the mutual segmental screened Coulomb and excluded volume interactions between two asymmetric PEs, by constructing a Hamiltonian following Edwards and Muthukumar. Assuming maximal ion-pairing in the complex, the system free energy comprising configurational entropy of the polyions and free-ion entropy of the small ions is minimized. The effective charge and size of the complex, larger than sub-Gaussian globules as for symmetric chains, increase with asymmetry in polyion length and charge density. The thermodynamic drive for complexation is found to increase with ionizability of symmetric polyions and with a decrease in asymmetry in length for equally ionizable polyions. The crossover Coulomb strength demarcating the ion-pair enthalpy-driven (low strength) and counterion release entropy-driven (high strength) is marginally dependent on the charge density, because so is the degree of counterion condensation, and strongly dependent on the dielectric environment and salt. The key results match the trends in simulations. The framework may provide a direct way to calculate thermodynamic dependencies of complexation on experimental parameters such as electrostatic strength and salt, thus to better analyze and predict observed phenomena for different sets of polymer pairs.

Laser-Induced Chirality of Plasmonic Nanoparticles Embedded in Porous Matrix.

Chiral plasmonic nanostructures have emerged as promising objects for numerous applications in nanophotonics, optoelectronics, biosensing, chemistry, and pharmacy. Here, we propose a novel method to induce strong chirality in achiral ensembles of gold nanoparticles via irradiation with circularly-polarized light of a picosecond Nd:YAG laser. Embedding of gold nanoparticles into a nanoporous silicate matrix leads to the formation of a racemic mixture of metal nanoparticles of different chirality that is enhanced by highly asymmetric dielectric environment of the nanoporous matrix. Then, illumination with intense circularly-polarized light selectively modifies the particles with the chirality defined by the handedness of the laser light, while their "enantiomers" survive the laser action almost unaffected. This novel modification of the spectral hole burning technique leads to the formation of an ensemble of plasmonic metal nanoparticles that demonstrates circular dichroism up to 100 mdeg. An unforeseen peculiarity of the chiral nanostructures obtained in this way is that 2D and 3D nanostructures contribute almost equally to the observed circular dichroism signals. Thus, the circular dichroism is neither even nor odd under reversal of direction of light propagation. These findings will help guide the development of a passive optical modulator and nanoplatform for enhanced chiral sensing and catalysis.

Influence of the Size and Dielectric Environments on the Optical Properties in CdS/ZnS Core–Shell Quantum Dot

Influence of the Size and Dielectric Environments on the Optical Properties in CdS/ZnS Core–Shell Quantum Dot

Direct nano-imaging of light-matter interactions in nanoscale excitonic emitters

Strong light-matter interactions in localized nano-emitters placed near metallic mirrors have been widely reported via spectroscopic studies in the optical far-field. Here, we report a near-field nano-spectroscopic study of localized nanoscale emitters on a flat Au substrate. Using quasi 2-dimensional CdSe/CdxZn1-xS nanoplatelets, we observe directional propagation on the Au substrate of surface plasmon polaritons launched from the excitons of the nanoplatelets as wave-like fringe patterns in the near-field photoluminescence maps. These fringe patterns were confirmed via extensive electromagnetic wave simulations to be standing-waves formed between the tip and the edge-up assembled nano-emitters on the substrate plane. We further report that both light confinement and in-plane emission can be engineered by tuning the surrounding dielectric environment of the nanoplatelets. Our results lead to renewed understanding of in-plane, near-field electromagnetic signal transduction from the localized nano-emitters with profound implications in nano and quantum photonics as well as resonant optoelectronics.

All-dielectric metasurface-based color filter in CMOS image sensor

The development of all-dielectric metasurfaces vigorously prompts the applications of optical metasurfaces for a CMOS (Complementary Metal-oxide-semiconductor) image sensor. Dielectric nanostructures, due to their resonant behavior and its tunability, offer the possibility to be assembled into flexible and miniature spectral filters, which could potentially replace conventional pigmented and dye-based color filters. In this paper, a transmission filter based on a GMR (Guided Mode Resonance) mode of all-dielectric metasurface is adopted as an example to study the effect of application scenario of integrated CMOS image sensor chip and manufacturing mistakes, such as the small size of pixel, special dielectric environment around, surface roughness and structural defects. Numerical calculations based on the FDTD (finite difference time domain) method are used to study the relationship between the robustness of the metasurfaces and the optical resonant modes. More important, a method simplifying different manufacturing mistakes as basic geometry structure during the FDTD simulation is also proposed and demonstrated. This work deepens our understanding of the working mechanism of all-dielectric metasurfaces and paves the way for their use in CMOS image sensor.

Ion Size-Dependent Electrochromism in Air-Stable Napthalenediimide-Based Conjugated Polymers.

Conjugated polymers (CPs) that show stable and reversible cation insertion/deinsertion under ambient conditions hold great potential for optoelectronic and energy storage devices. However, n-doped CPs are prone to parasitic reactions upon exposure to moisture or oxygen. This study reports a new family of napthalenediimide (NDI) based conjugated polymers capable of undergoing electrochemical n-type doping in ambient air. By functionalizing the NDI-NDI repeating unit with alternating triethylene glycol and octadecyl side chains, the polymer backbone shows stable electrochemical doping at ambient conditions. We systematically investigate the extent of volumetric doping involving monovalent cations of varying size (Li+, Na+, tetraethylammonium (TEA+)) with electrochemical methods, including cyclic voltammetry, differential pulse voltammetry, spectroelectrochemistry, and electrochemical impedance spectroscopy. We observed that introducing hydrophilic side chains on the polymer backbone improves the local dielectric environment of the backbones and lowers the energetic barrier for ion insertion. Surprisingly, when using Na+ electrolyte, the polymer films exhibit higher volumetric doping efficiency, faster-switching kinetics, higher optical contrast, and selective multielectrochromism when compared to Li+ or TEA+ electrolytes. Using well-tempered metadynamics, we characterize the free energetics of side chain-ion interactions to find that Li+ binds more tightly to the glycolated NDI moieties than Na+, hindering Li+ ion transport, switching kinetics, and limiting the films' doping efficiency.

Enhancement of characteristics of ester based insulating oil in the presence of nano composites

The development of reliable, environmentally safe and economically viable insulating oil for transformers is an endless effort of the electrical industry. Recent research is based on natural ester fluid, a green insulating oil that exhibits excellent dielectric performance and environment friendly characteristics. Mineral oil is a popular dielectric liquid used in transformers and switchgear. The environmental hazards caused by the oil have reached an alarming level and several incidents relating to transformer explosions have been reported worldwide, one major cause being the insulation failure. The requirement of an insulating liquid with fire safety and biodegradable nature has become a key concern of transformer manufacturers. One such kind of oil is Refined Coconut Oil having similar properties and characteristics as mineral oil. Refined coconut oil is commonly available as an environmentally friendly ester oil. In the present work, nano- fluids such as Nano MgO and nano BN have been added in different concentrations to identify their positive effects on improvement in the characteristics of mineral oil. It is also conclusively proved that nano-fluids are potential replacements for mineral oil since the qualities of the base oil were improved by the inclusion of nanoparticles.

Microwave demonstration of Purcell effect enhanced radiation efficiency

We experimentally demonstrate a Purcell effect-based design technique for improved impedance matching, and thus enhanced the reflection coefficient from a small microwave emitter. Using an iterative process centred on comparing the phase of the radiated field of the emitter in air with that of the emitter in a dielectric environment, we optimise the structure of a dielectric hemisphere above a ground plane surrounding a small monopolar microwave emitter in order to maximise its radiation efficiency. The optimised system shows very strong coupling between the emitter and two omnidirectional radiation modes at 1.99 GHz and 2.84 GHz, yielding Purcell enhancement factors of 1762 and 411 times increase respectively, and near perfect radiation efficiency.

Ultrathin All-2D Lateral Diodes Using Top and Bottom Contacted Laterally Spaced Graphene Electrodes to WS2 Semiconductor Monolayers

The ultrathin nature of two-dimensional (2D) materials opens up opportunities for creating devices that are substantially thinner than using traditional bulk materials. In this article, monolayer 2D materials grown by the chemical vapor deposition method are used to fabricate ultrathin all-2D lateral diodes. We show that placing graphene electrodes below and above the WS2 monolayer, instead of the same side, results in a lateral device with two different Schottky barrier heights. Due to the natural dielectric environment, the bottom graphene layer is wedged between the WS2 and the SiO2 substrate, which has a different doping level than the top graphene layer that is in contact with WS2 and air. The lateral separation of these two graphene electrodes results in a lateral metal-semiconductor-metal junction with two asymmetric barriers but yet retains its ultrathin form of two-layer thickness. The rectification and diode behavior can be exploited in transistors, photodiodes, and light-emitting devices. We show that the device exhibits a rectification ratio up to 90 under a laser power of 1.37 μW at a bias voltage of ±3 V. We demonstrate that both the back-gate voltage and laser illumination can tune the rectification behavior of the device. Furthermore, the device can generate strong red electroluminescence in the WS2 area across the two graphene electrodes under an average flowing current of 2.16 × 10-5 A. This work contributes to the current understanding of the 2D metal-semiconductor heterojunction and offers an idea to obtain all-2D Schottky diodes by retaining the ultrathin device concept.

Persistent room-temperature valley polarization in graphite-filtered WS2 monolayer

Transition metal dichalcogenide (TMD) monolayers (1L) in the 2H-phase are two-dimensional semiconductors with two valleys in their band structure that can be selectively populated using circularly polarized light. The choice of the substrate for monolayer TMDs is an essential factor for the optoelectronic properties and for achieving a high degree of valley polarization at room temperature (RT). In this work, we investigate the RT valley polarization of monolayer WS2 on different substrates. A degree of polarization of photoluminescence (PL) in excess of 27% is found from neutral excitons in 1L-WS2 on graphite at RT, under resonant excitation. Using chemical doping through photochlorination we modulate the polarization of the neutral exciton emission from 27% to 38% for 1L-WS2/graphite. We show that the valley polarization strongly depends on the interplay between doping and the choice of the supporting layer of TMDs. Time-resolved PL measurements, corroborated by a rate equation model accounting for the bright exciton population in the presence of a dark exciton reservoir support our findings. These results suggest a pathway towards engineering valley polarization and exciton lifetimes in TMDs, by controlling the carrier density and/or the dielectric environment at ambient conditions.

Intrinsic Dipole Arrangement to Coordinate Energy Levels for Efficient and Stable Perovskite Solar Cells.

Despite great progress in perovskite photovoltaics, it should be noted that the intrinsic disorder dipolar cations in organic-inorganic hybrid perovskites exert negative effects on the energy band structure as well as the carrier separation and transfer dynamics. However, oriented polarization achieved by applying an external electric field may cause irreversible damage to perovskites. Herein, a unique and efficient strategy is developed to modulate the intrinsic dipole arrangement in perovskite films for high-performance and stable perovskite solar cells (PSCs). The spontaneous reorientation of dipolar cation methylamine is triggered by a polar molecule, constructing a vertical polarization during crystallization regulation. The oriented dipole determines a gradient energy-level arrangement in PSCs and more favorable energetics at interfaces, effectively enhancing the built-in electric field and suppressing the nonradiative recombination. Besides, the dipole reorientation induces a local dielectric environment to remarkably reduce exciton binding energy, leading to an ultralong carrier diffusion length of up to 1708nm. Accordingly, the n-i-p PSCs achieve a significant increase in power conversion efficiency, reaching 24.63% with negligible hysteresis and exhibiting outstanding stabilities. This strategy also provides a facile route to eliminate the mismatched energetics and enhance carrier dynamics for other novel photovoltaic devices.