Dicopper Center Research Articles

Reductive NO Coupling at Dicopper Center via a [Cu2(NO)2]2+ Diamond-Core Intermediate.

Treatment of a dicopper(I,I) complex with excess amounts of NO leads to the formation of a dicopper dinitrosyl [Cu2(NO)2]2+ complex capable of (i) releasing two equivalents of NO reversibly in 90% yield and (ii) reacting with another equivalent of NO to afford N2O and dicopper nitrosyl oxo species [Cu2(NO)(O)]2+. Resonance Raman characterization of the [Cu2(NO)2]2+ complex shows a 15N-sensitive N═O stretch at 1527.6 cm-1 and two Cu-N stretches at 390.6 and 414.1 cm-1, supporting a symmetric diamond-core structure with bis-μ-NO ligands. The conversion of [Cu2(NO)2]2+ to [Cu2(NO)O]2+ occurs via a rate-limiting reaction with NO and bypasses the dicopper oxo intermediate, a mechanism distinct from that of diFe-mediated NO reduction to N2O.

Controlling the Direction of S-Nitrosation versus Denitrosation: Reversible Cleavage and Formation of an S-N Bond within a Dicopper Center.

Iron and copper enzymes are known to promote reversible S-nitrosation/denitrosation in biology. However, it is unclear how the direction of S-N bond formation/scission is controlled. Herein, we demonstrate the interconversion of metal-S-nitrosothiol adduct M(RSNO) and metal nitrosyl thiolate complex M(NO)(SR), which may regulate the direction of reversible S-(de)nitrosation. Treatment of a dicopper(I,I) complex with RSNO leads to a mixture of two structural isomers: dicopper(I,I) S-nitrosothiol [CuICuI(RSNO)]2+ and dicopper(II,II) nitrosyl thiolate [CuIICuII(NO)(SR)]2+. The Keq between these two structural isomers is sensitive to temperature, the solvent coordination ability, and counterions. Our study illustrates how copper centers can modulate the direction of RS-NO bond formation and cleavage through a minor perturbation of the local environment.

Redox‐Neutral S‐nitrosation Mediated by a Dicopper Center

An redox-neutral S -nitrosation of thiol has been achieved at dicopper(I,I) center. Treatment of dicopper (I,I) complex with excess NO • and thiol generates a dicopper (I,I) di- S -nitrosothiol complex [Cu I Cu I (RSNO) 2 ] 2+ or dicopper (I,I) mono- S -nitrosothiol complex [Cu I Cu I (RSNO)] 2+ , which readily release RSNO in 88-94% yield. The S -nitrosation reaction proceeds through a mixed-valence [Cu II Cu III ( μ -O)( μ -NO)] 2+ species, which deprotonates RS-H at the basic μ -O site and nitrosates the RS - at the μ -NO site. The [Cu II Cu III ( μ -O)( μ -NO)] 2+ complex is also competent for O -nitrosation of MeOH, which is isoelectronic to thiol. In this case, a rare [Cu II Cu II ( μ -NO)(OMe)] 2+ intermediate has been isolated and fully characterized, suggesting the S -nitrosation proceeds through the intermediary of analogous [Cu II Cu II ( μ -NO)(SR)] 2+ species. The redox- and proton-neutral S- nitrosation process reported here represents the first functional model of ceruloplasmin in mediating S -nitrosation of external thiols, adding further implications for biological copper sites in the interconversion of NO • /RSNO.

Redox‐Neutral S‐nitrosation Mediated by a Dicopper Center

AbstractA redox‐neutral S‐nitrosation of thiol has been achieved at a dicopper(I,I) center. Treatment of dicopper (I,I) complex with excess NO. and thiol generates a dicopper (I,I) di‐S‐nitrosothiol complex [CuICuI(RSNO)2]2+ or dicopper (I,I) mono‐S‐nitrosothiol complex [CuICuI(RSNO)]2+, which readily release RSNO in 88–94 % yield. The S‐nitrosation proceeds by a mixed‐valence [CuIICuIII(μ‐O)(μ‐NO)]2+ species, which deprotonates RS‐H at the basic μ‐O site and nitrosates RS− at the μ‐NO site. The [CuIICuIII(μ‐O)(μ‐NO)]2+ complex is also competent for O‐nitrosation of MeOH. A rare [CuIICuII(μ‐NO)(OMe)]2+ intermediate was isolated and fully characterized, suggesting the S‐nitrosation may proceed through the intermediary of analogous [CuIICuII(μ‐NO)(SR)]2+ species. This redox‐ and proton‐neutral S‐nitrosation process is the first functional model of ceruloplasmin in mediating S‐nitrosation of external thiols, with implications for biological copper sites in the interconversion of NO./RSNO.

A Dicopper Nitrenoid by Oxidation of a CuICuI Core: Synthesis, Electronic Structure, and Reactivity.

A dicopper nitrenoid complex was prepared by formal oxidative addition of the nitrenoid fragment to a dicopper(I) center by reaction with the iminoiodinane PhINTs (Ts = tosylate). This nitrenoid complex, (DPFN)Cu2(μ-NTs)[NTf2]2 (DPFN = 2,7-bis(fluorodi(2-pyridyl)methyl)-1,8-naphthyridine), is a powerful H atom abstractor that reacts with a range of strong C-H bonds to form a mixed-valence Cu(I)/Cu(II) μ-NHTs amido complex in the first example of a clean H atom transfer to a dicopper nitrenoid core. In line with this reactivity, DFT calculations reveal that the nitrenoid is best described as an iminyl (NR radical anion) complex. The nitrenoid was trapped by the addition of water to form a mixed-donor hydroxo/amido dicopper(II) complex, which was independently obtained by reaction of a Cu2(μ-OH)2 complex with an amine through a protonolysis pathway. This mixed-donor complex is an analogue for the proposed intermediate in copper-catalyzed Chan-Evans-Lam coupling, which proceeds via C-X (X = N or O) bond formation. Treatment of the dicopper(II) mixed donor complex with MgPh2(THF)2 resulted in generation of a mixture that includes both phenol and a previously reported dicopper(I) bridging phenyl complex, illustrating that both reduction of dicopper(II) to dicopper(I) and concomitant C-X bond formation are feasible.

Ditopic Chelators of Dicopper Centers for Enhanced Tyrosinases Inhibition

Tyrosinase enzymes (Tys) are involved in the key steps of melanin (protective pigments) biosynthesis and molecules targeting the binuclear copper active site on tyrosinases represent a relevant strategy to regulate enzyme activities. In this work, the possible synergic effect generated by a combination of known inhibitors is studied. For this, derivatives containing kojic acid (KA) and 2-hydroxypyridine-N-oxide (HOPNO) combined with a thiosemicarbazone (TSC) moiety were synthetized. Their inhibition activities were evaluated on purified tyrosinases from different sources (mushroom, bacterial, and human) as well as on melanin production by lysates from the human melanoma MNT-1 cell line. Results showed significant enhancement of the inhibitory effects compared with the parent compounds, in particular for HOPNO-TSC. To elucidate the interaction mode with the dicopper(II) active site, binding studies with a tyrosinase bio-inspired model of the dicopper(II) center were investigated. The structure of the isolated adduct between one ditopic inhibitor (KA-TSC) and the model complex reveals that the binding to a dicopper center can occur with both chelating sites. Computational studies on model complexes and docking studies on enzymes led to the identification of KA and HOPNO moieties as interacting groups with the dicopper active site.

Thiosemicarbazide binds with the dicopper center in the competitive inhibition of mushroom tyrosinase enzyme: Synthesis and molecular modeling of theophylline analogues

Theophylline is long known for its anti-ageing and anti-oxidative properties. Moreover, Tyrosinase is a crucial enzyme that regulates the melanin synthetic pathway, which is involved in various physiological metabolic processes including aging. The current paper describes the synthesis of various heterocyclic systems coupled with theophylline moiety along with their tyrosinase inhibition activity in view to identify the potent nucleus. Around 19 compounds were synthesized and screened for enzyme inhibition. Based on the current study, it is suggested that compound 18 having thiosemicarbazide has strong enzyme inhibition potential. The enzyme kinetics and docking studies provide important insights into how the compound interacts with the mushroom tyrosinase active site. The work will provide clue to developing new, potent tyrosinase inhibitors for drug development.

Exceptional Substrate Diversity in Oxygenation Reactions Catalyzed by a Bis(μ-oxo) Copper Complex.

The enzyme tyrosinase contains a reactive side‐on peroxo dicopper(II) center as catalytically active species in C−H oxygenation reactions. The tyrosinase activity of the isomeric bis(μ‐oxo) dicopper(III) form has been discussed controversially. The synthesis of bis(μ‐oxo) dicopper(III) species [Cu2(μ‐O)2(L1)2](X)2 ([O1](X)2, X=PF6 − , BF4 −, OTf−, ClO4 −), stabilized by the new hybrid guanidine ligand 2‐{2‐((dimethylamino)methyl)phenyl}‐1,1,3,3‐tetramethylguanidine (L1), and its characterization by UV/Vis, Raman, and XAS spectroscopy, as well as cryo‐UHR‐ESI mass spectrometry, is described. We highlight selective oxygenation of a plethora of phenolic substrates mediated by [O1](PF6)2, which results in mono‐ and bicyclic quinones and provides an attractive strategy for designing new phenazines. The selectivity is predicted by using the Fukui function, which is hereby introduced into tyrosinase model chemistry. Our bioinspired catalysis harnesses molecular dioxygen for organic transformations and achieves a substrate diversity reaching far beyond the scope of the enzyme.

Assemblierung des CuA-Zentrums in bakterieller Cytochrom-Oxidase

The CuA cofactor in cytochrome oxidase of mitochondria and many aerobic prokaryotes is a di-copper metal center that catalyzes one-electron transfer from cytochrome c to the oxygen-reducing active site. How the two copper ions are brought together for assembly of CuA is reported here. A thioredoxin-like disulfide reductase and two dedicated metal-lochaperones, one for Cu2+ and one for Cu1+, cooperate in this process. Copper insertion into cytochrome oxidase proceeds by a previously unknown mechanism.

Biochemical pathway for the biosynthesis of the CuA center in bacterial cytochrome c oxidase.

The di-copper center CuA is an essential metal cofactor in cytochrome oxidase (Cox) of mitochondria and many prokaryotes, mediating one-electron transfer from cytochrome c to the site for oxygen reduction. CuA is located in subunit II (CoxB) of Cox and protrudes into the periplasm of Gram-negative bacteria or the mitochondrial intermembrane space. How the two copper ions are brought together to build CoxB·CuA is the subject of this review. It had been known that the reductase TlpA and the metallochaperones ScoI and PcuC are required for CuA formation in bacteria, but the mechanism of copper transfer has emerged only recently for the Bradyrhizobiumdiazoefficiens system. It consists of the following steps: (a) TlpA keeps the active site cysteine pair of CoxB in its dithiol state as a prerequisite for metal insertion; (b) ScoI·Cu2+ rapidly forms a transient complex with apo-CoxB; (c) PcuC, loaded with Cu1+ and Cu2+ , dissociates this complex to CoxB·Cu2+ , and a second PcuC·Cu1+ ·Cu2+ transfers Cu1+ to CoxB·Cu2+ , yielding mature CoxB·CuA . Variants of this pathway might exist in other bacteria or mitochondria.

Dicopper μ-Oxo, μ-Nitrosyl Complex from the Activation of NO or Nitrite at a Dicopper Center.

Treatment of a dicopper(I,I) complex with nitric oxide produces a dicopper μ-oxo, μ-nitrosyl complex [LCu2(μ-O)(μ-NO)]2+, representing the first structurally characterized μ-oxo, μ-nitrosyl metal complex. This compound can also be synthesized from the reaction of nitrite with an [LCuIICuI]3+ synthon. Full characterization of the thermal-sensitive [LCu2(μ-O)(μ-NO)]2+ complex with IR, EPR, and X-ray crystallography suggests a localized mixed-valent CuIII, CuII, O2-, NO- formulation. The [Cu2(μ-O)(μ-NO)]2+ core efficiently oxidizes exogenous substrates, such as phosphine, cyclohexadienes, and isochroman to afford phosphine oxide, benzene, and 1-isochromanone. Since both nitrite and nitric oxide are proposed oxidants in denitrifying methane oxidation, the oxidative reactivity of [Cu2(μ-O)(μ-NO)]2+ core is potentially relevant to anaerobic methane oxidation observed in methanotrophic archaea.

Aryl Group Transfer from Tetraarylborato Anions to an Electrophilic Dicopper(I) Center and Mixed-Valence μ-Aryl Dicopper(I,II) Complexes.

The synthesis of discrete, cationic binuclear μ-aryl dicopper complexes [Cu2(μ-η(1):η(1)-Ar)DPFN]X (Ar = C6H5, 3,5-(CF3)2C6H3, and C6F5; DPFN = 2,7-bis(fluoro-di(2-pyridyl)methyl)-1,8-naphthyridine; X = BAr4(-) and NTf2(-); Tf = SO2CF3) was achieved by treatment of a dicopper complex [Cu2(μ-η(1):η(1)-NCCH3)DPFN]X2 (X = PF6(-) and NTf2(-)) with tetraarylborates. Structural characterization revealed symmetrically bridging aryl groups, and (1)H NMR spectroscopy evidenced the same structure in solution at 24 °C. Electrochemical investigation of the resulting arylcopper complexes uncovered reversible redox events that led to the synthesis and isolation of a rare mixed-valence organocopper complex [Cu2(μ-η(1):η(1)-Ph)DPFN](NTf2)2 in high yield. The solid-state structure of the mixed-valence μ-phenyl complex exhibits inequivalent copper centers, despite a short Cu···Cu distance. Electronic and variable-temperature electron paramagnetic resonance spectroscopy of the mixed-valence μ-phenyl complex suggest that the degree of spin localization is temperature-dependent, with a high degree of spin localization observed at lower temperatures. Electronic structure calculations agree with the experimental results and suggest that the spin is localized almost entirely on one metal center.

A radical rebound mechanism for the methane oxidation reaction promoted by the dicopper center of a pMMO enzyme: a computational perspective.

In this article, we investigated the hydroxylation of methane catalyzed by the binuclear copper site of a pMMO enzyme, through a radical rebound mechanism. All intermediates and transition states along the reaction coordinate were located and the energies involved in the mechanism calculated using the B3LYP functional including dispersion effects. Our B3LYP-D2 results show that the singlet state of the (μ-1,2-peroxo)Cu(II)2 complex plays an important role as the lowest energy species prior to C-H bond activation. A crossing between the singlet and triplet PES is suggested to occur before the cleavage of the C-H bond of methane, where the triplet (bis-μ-oxo)Cu(III)2 is very reactive towards activation of the strong C-H bond of methane. The C-H bond activation is the rate-determining step of the reaction, with an activation energy of 18.6 kcal mol(-1) relative to the singlet (μ-1,2-peroxo)Cu(II)2 species. Comparison with previous theoretical results for a non-synchronous concerted mechanism suggests the radical rebound mechanism as a possible alternative pathway.

Structural and reactivity models for copper oxygenases: cooperative effects and novel reactivities.

Dioxygen is widely used in nature as oxidant. Nature itself has served as inspiration to use O2 in chemical synthesis. However, the use of dioxygen as an oxidant is not straightforward. Its triplet ground-state electronic structure makes it unreactive toward most organic substrates. In natural systems, metalloenzymes activate O2 by reducing it to more reactive peroxide (O2(2-)) or superoxide (O2(-)) forms. Over the years, the development of model systems containing transition metals has become a convenient tool for unravelling O2-activation mechanistic aspects and reproducing the oxidative activity of enzymes. Several copper-based systems have been developed within this area. Tyrosinase is a copper-based O2-activating enzyme, whose structure and reactivity have been widely studied, and that serves as a paradigm for O2 activation at a dimetal site. It contains a dicopper center in its active site, and it catalyzes the regioselective ortho-hydroxylation of phenols to catechols and further oxidation to quinones. This represents an important step in melanin biosynthesis and it is mediated by a dicopper(II) side-on peroxo intermediate species. In the present accounts, our research in the field of copper models for oxygen activation is collected. We have developed m-xylyl linked dicopper systems that mimick structural and reactivity aspects of tyrosinase. Synergistic cooperation of the two copper(I) centers results in O2 binding and formation of bis(μ-oxo)dicopper(III) cores. These in turn bind and ortho-hydroxylate phenolates via an electrophilic attack of the oxo ligand over the arene. Interestingly the bis(μ-oxo)dicopper(III) cores can also engage in ortho-hydroxylation-defluorination of deprotonated 2-fluorophenols, substrates that are well-known enzyme inhibitors. Analysis of Cu2O2 species with different binding modes show that only the bis(μ-oxo)dicopper(III) cores can mediate the reaction. Finally, the use of unsymmetric systems for oxygen activation is a field that still remains rather unexplored. We envision that the unsymmetry might infere interesting new reactivities. We contributed to this topic with the development of an unsymmetric ligand (m-XYL(N3N4)), whose dicuprous complex reacts with O2 and forms a trans-peroxo dicopper(II) species that showed a markedly different reactivity compared to a symmetric trans-peroxo dicopper(II) analog. Nucleophilic reactivity is observed for the unsymmetric trans-peroxo dicopper(II) species against electrophilies such as H(+), CO2 and aldehydes, and neither oxygen atom transfer nor hydrogen abstraction is observed when reacting with oxygen atom acceptors (triphenyl phosphine, sulfides) and substrates with weak C-H bonds. Instead, electrophilic monooxygenase-like ortho-hydroxylation reactivity is described for these unsymmetric species upon reaction with phenolates. Finally, by using a second dinucleating unsymmetric ligand (L(N3N4)), we have described copper(I) containing heterodimetallic systems and explored their O2 binding properties. Site specific metalation led to the generation of dimeric heterometallic M'CuO2CuM' species from intermolecular O2 binding at copper sites.

Exploring the interaction of N/S compounds with a dicopper center: tyrosinase inhibition and model studies.

Tyrosinase (Ty) is a copper-containing enzyme widely present in plants, bacteria, and humans, where it is involved in biosynthesis of melanin-type pigments. Development of Ty inhibitors is an important approach to control the production and the accumulation of pigments in living systems. In this paper, we focused our interest in phenylthiourea (PTU) and phenylmethylene thiosemicarbazone (PTSC) recognized as inhibitors of tyrosinase by combining enzymatic studies and coordination chemistry methods. Both are efficient inhibitors of mushroom tyrosinase and they can be considered mainly as competitive inhibitors. Computational studies verify that PTSC and PTU inhibitors interact with the metal center of the active site. The KIC value of 0.93 μM confirms that PTSC is a much more efficient inhibitor than PTU, for which a KIC value of 58 μM was determined. The estimation of the binding free energies inhibitors/Ty confirms the high inhibitor efficiency of PTSC. Binding studies of PTSC along with PTU to a dinuclear copper(II) complex ([Cu2(μ-BPMP)(μ-OH)](ClO4)2 (1); H-BPMP = 2,6-bis-[bis(2-pyridylmethyl)aminomethyl]-4-methylphenol) known to be a structural and functional model for the tyrosinase catecholase activity, have been performed. Interactions of the compounds with the dicopper model complex 1 were followed by spectrophotometry and electrospray ionization (ESI). The molecular structure of 1-PTSC and 1-PTU adducts were determined by single-crystal X-ray diffraction analysis showing for both an unusual bridging binding mode on the dicopper center. These results reflect their adaptable binding mode in relation to the geometry and chelate size of the dicopper center.

Identification of the valence and coordination environment of the particulate methane monooxygenase copper centers by advanced EPR characterization.

Particulate methane monooxygenase (pMMO) catalyzes the oxidation of methane to methanol in methanotrophic bacteria. As a copper-containing enzyme, pMMO has been investigated extensively by electron paramagnetic resonance (EPR) spectroscopy, but the presence of multiple copper centers has precluded correlation of EPR signals with the crystallographically identified monocopper and dicopper centers. A soluble recombinant fragment of the pmoB subunit of pMMO, spmoB, like pMMO itself, contains two distinct copper centers and exhibits methane oxidation activity. The spmoB protein, spmoB variants designed to disrupt one or the other or both copper centers, as well as native pMMO have been investigated by EPR, ENDOR, and ESEEM spectroscopies in combination with metal content analysis. The data are remarkably similar for spmoB and pMMO, validating the use of spmoB as a model system. The results indicate that one EPR-active Cu(II) ion is present per pMMO and that it is associated with the active-site dicopper center in the form of a valence localized Cu(I)Cu(II) pair; the Cu(II), however, is scrambled between the two locations within the dicopper site. The monocopper site observed in the crystal structures of pMMO can be assigned as Cu(I). 14N ENDOR and ESEEM data are most consistent with one of these dicopper-site signals involving coordination of the Cu(II) ion by residues His137 and His139, the other with Cu(II) coordinated by His33 and the N-terminal amino group. 1H ENDOR measurements indicate there is no aqua (HxO) ligand bound to the Cu(II), either terminally or as a bridge to Cu(I).

Mutagenesis of the hydrocarbon monooxygenase indicates a metal centre in subunit-C, and not subunit-B, is essential for copper-containing membrane monooxygenase activity

The hydrocarbon monooxygenase (HMO) of Mycobacterium NBB4 is a member of the copper-containing membrane monooxygenase (CuMMO) superfamily, which also contains particulate methane monooxygenases (pMMOs) and ammonia monooxygenases (AMOs). CuMMOs have broad applications due to their ability to catalyse the oxidation of difficult substrates of environmental and industrial relevance. Most of our understanding of CuMMO biochemistry is based on pMMOs and AMOs as models. All three available structures are from pMMOs. These share two metal sites: a dicopper centre coordinated by histidine residues in subunit-B and a 'variable-metal' site coordinated by carboxylate and histidine residues from subunit-C. The exact nature and role of these sites is strongly debated. Significant barriers to progress have been the physiologically specialized nature of methanotrophs and autotrophic ammonia-oxidizers, lack of a recombinant expression system for either enzyme and difficulty in purification of active protein. In this study we use the newly developed HMO model system to perform site-directed mutagenesis on the predicted metal-binding residues in the HmoB and HmoC of NBB4 HMO. All mutations of predicted HmoC metal centre ligands abolished enzyme activity. Mutation of a predicted copper-binding residue of HmoB (B-H155V) reduced activity by 81 %. Mutation of a site that shows conservation within physiologically defined subgroups of CuMMOs was shown to reduce relative HMO activity towards larger alkanes. The study demonstrates that the modelled dicopper site of subunit-B is not sufficient for HMO activity and that a metal centre predicted to be coordinated by residues in subunit-C is essential for activity.

Isolation and Purification of Condensed Tannins from Flamboyant Tree and Their Antioxidant and Antityrosinase Activities

Flamboyant tree, a kind of medicinal plant, was studied as a source of condensed tannins. The antioxidant activities of the condensed tannins from the leaf, fruit, and stem bark of flamboyant tree were screened by ABTS radical and hydroxyl radical scavenging activity methods. The results indicated that these compounds possessed potent antioxidant activity. Their structures were then characterized by high-performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS) after thiolytic degradation. The results showed that the leaf condensed tannins were composed of afzelechin/epiafzelechin, catechin/epicatechin, and gallocatechin/epigallocatechin, while the fruit and stem bark condensed tannins had afzelechin/epiafzelechin and catechin/epicatechin. In addition, the condensed tannins were evaluated for their antityrosinase ability. They were found to have significant antityrosinase activity. The IC50 values were 35 ± 2.0 and 40 ± 0.5μg/ml for the condensed tannins of fruit and stem bark, respectively. Further, fluorescence quenching and copper interacting techniques were utilized to unravel the molecular mechanisms of the inhibition. The results showed that the hydroxyl group of the condensed tannins could chelate the dicopper center of the enzyme and interact with tryptophan residues. Our studies revealed that condensed tannins might be suitable for use in food, agriculture, cosmetic, nutraceutical, and pharmaceutical applications.

Thiomethyl Substituted Dicopper Complexes: Attempts to Reproduce the Asymmetry of the Active Site from Type 3 Copper Enzymes

AbstractTwo new dinucleating phenol‐based ligands (m‐HLSMe and p‐HLSMe) bearing pyridine‐containing pendant arms with a SMe group on one pyridine (meta or para position relative to the pyridine nitrogen atom) have been synthesized. After coordination by two copper(II) ions, the corresponding μ‐phenoxido, μ‐hydroxido dicopper(II) complexes were isolated and characterized by UV/Vis, EPR spectroscopy, single‐crystal X‐ray analysis (for the complex with the SMe substituent at the meta position) and electrochemistry. The presented compounds mimic the active site of type 3 copper enzymes and in particular the distinct environments of the copper ions.Both complexes are active as catalysts for the oxidation of 3, 5‐di‐tert‐butylcatechol to the respective quinone. The catalytic properties of the complexes depend on substrate binding, as reflected by the KM values determined for the complexes in presence of 3, 5‐dtbc and are not correlated directly with the redox properties of the dicopper center.

Evidence for Oxygen Binding at the Active Site of Particulate Methane Monooxygenase

Particulate methane monooxygenase (pMMO) is an integral membrane metalloenzyme that converts methane to methanol in methanotrophic bacteria. The enzyme consists of three subunits, pmoB, pmoA, and pmoC, organized in an α(3)β(3)γ(3) trimer. Studies of intact pMMO and a recombinant soluble fragment of the pmoB subunit (denoted as spmoB) indicate that the active site is located within the soluble region of pmoB at the site of a crystallographically modeled dicopper center. In this work, we have investigated the reactivity of pMMO and spmoB with oxidants. Upon reduction and treatment of spmoB with O(2) or H(2)O(2) or pMMO with H(2)O(2), an absorbance feature at 345 nm is generated. The energy and intensity of this band are similar to those of the μ-η(2):η(2)-peroxo-Cu(II)(2) species formed in several dicopper enzymes and model compounds. The feature is not observed in inactive spmoB variants in which the dicopper center is disrupted, consistent with O(2) binding to the proposed active site. Reaction of the 345 nm species with CH(4) results in the disappearance of the spectroscopic feature, suggesting that this O(2) intermediate is mechanistically relevant. Taken together, these observations provide strong new support for the identity and location of the pMMO active site.