Diastolic Blood Pressure Estimation Research Articles

From BpTRU to OMRON: The impact of changing automated blood pressure measurement devices on adult population estimates of blood pressure and hypertension.

In Cycle 7 (2022), the Canadian Health Measures Survey (CHMS) introduced the OMRON (OM) IntelliSense HEM-907XL blood pressure (BP) monitor after using the BpTRU (BT) BPM-300 BP monitor for six cycles. This study assessed differences between adult BP values measured by both devices and whether equations could be developed to compare BP measurements taken using the two devices. In Cycle 6 (2018 to 2019) of the CHMS, BP was measured using BT and OM devices. Between-device estimates of systolic BP (SBP), diastolic BP (DBP), and hypertension prevalence were compared for 1,072 adults aged 18 to 79 years. Sex, age, body mass index (BMI), and the use of antihypertensive medication were examined in linear regression models to predict SBP and DBP values measured with OM based on those measured with BT. Average SBP measured with OM was 6 millimetres of mercury (mmHg) higher than average SBP measured with BT, and average DBP measured with OM was 2 mmHg lower than DBP measured with BT. Hypertension prevalence based on OM readings was 35.4%, compared with 34.0% based on BT readings. Between-device BP differences varied in magnitude by sex, age group, and BMI category. Average model-predicted estimates of BP were comparable to measured estimates, but predicted values were lower at higher levels of BP. Switching BP monitors will substantively affect population estimates of adult SBP and DBP but may have less impact on estimates of adult hypertension prevalence. The prediction equations proposed in this study can be applied to adult BP data from cycles 1 to 6 of the CHMS for comparison with BP measurements taken in Cycle 7, with some caveats. The impact of changing to the OM monitor in Cycle 7 should be acknowledged when reporting estimates of adult BP based on the CHMS.

Performance comparison of machine learning algorithms for the estimation of blood pressure using photoplethysmography

This paper deals with an in-depth performance analysis on the estimation of Systolic Blood Pressure (SBP) and Diastolic Blood Pressure (DBP) by using features from the photoplethysmography (PPG) signal enhanced using the Maximal Overlap Discrete Wavelet Transform (MODWT), to train many machine learning (ML) regression models, including eXtreme Gradient Boost (XGBoost). The impact of different features selections methods, ML methods and training set sizes has been analyzed. One result is on the achievable improvements using features extracted from MODWT enhanced PPG signals. The most significant features have been selected using three different algorithms, namely RReliefF, Minimum Redundancy Maximum Relevance (MRMR) and Correlation-based Feature Selection (CFS). This comparison has been critical to underline that the exploitation of the new features allows to improve SBP and DBP estimation. Moreover, the authors have trained several ML algorithms to provide a comparison of their accuracy and training time, showing the Pareto frontier. RReliefF and MRMR selections algorithms, and several ML algorithms such as XGBoost, Gaussian Process Regression(GPR) and Ensemble stood out for their performance, with a different compromise between prediction error and training time. In addition, a further result has been obtained by varying the dimension of the dataset to understand the impact on Root Mean Square Error (RMSE) for models that have shown better performance, giving an empirical relationship on achievable RMSE as a function of training set size. From that relationship it has been extrapolated an upper boundary of the set size over which no further RMSE improvements are expected.

Proposal of a novel cardiovascular risk prediction score in lupus nephritis.

Patients with systemic lupus erythematosus are prone to develop cardiovascular disease (CVD), and have increased morbidity and mortality. We conducted a retrospective analysis on lupus nephritis patients to assess the occurrence and predictors of major adverse cardiovascular events (MACE). Data were collected from patients who underwent kidney biopsy between 2005 and 2020. Statistical analysis was performed to unveil correlations. 91 patients were analyzed in this period, with a mean age of 37.3 ± 12.3 years and 86% being female. The mean follow-up time was 62 ± 48 months. 15.38% of the patients underwent at least one MACE. Two patients deceased of CVD. Increased age (35.81 ± 11.14 vs 45.5 ± 15.11 years, p=0.012) entailed a higher occurrence of MACEs. Neutrophil count (5.15 ± 2.83 vs 7.3 ± 2.99 Giga/L, p=0.001) was higher, whereas diastolic blood pressure (DBP) was lower (89.51 ± 10.96 vs 78.43 ± 6.9 mmHg, p<0.001) at the time of the biopsy in patients with MACE. Age, neutrophil count, and DBP proved to be independent predictors of MACEs. We propose a new model (CANDE - Cardiovascular risk based on Age, Neutrophil count, and Diastolic blood pressure Estimation score) calculated from these variables, which predicts the probability of MACE occurrence. This study underscores the importance of actively screening for cardiovascular risks in this vulnerable patient population. Age, neutrophil count, and diastolic blood pressure have been established as independent risk factors for MACE in lupus nephritis. The CANDE score derived from these parameters may serve as a prompt, cost-effective, and easily accessible estimation tool for assessing the likelihood of major adverse cardiovascular risk. These findings emphasize the necessity for comprehensive management strategies addressing both immune dysregulation and cardiovascular risk factors in systemic lupus erythematosus to mitigate adverse outcomes.

DNN-BP: a novel framework for cuffless blood pressure measurement from optimal PPG features using deep learning model.

Continuous blood pressure (BP) provides essential information for monitoring one's health condition. However, BP is currently monitored using uncomfortable cuff-based devices, which does not support continuous BP monitoring. This paper aims to introduce a blood pressure monitoring algorithm based on only photoplethysmography (PPG) signals using the deep neural network (DNN). The PPG signals are obtained from 125 unique subjects with 218 records and filtered using signal processing algorithms to reduce the effects of noise, such as baseline wandering, and motion artifacts. The proposed algorithm is based on pulse wave analysis of PPG signals, extracted various domain features from PPG signals, and mapped them to BP values. Four feature selection methods are applied and yielded four feature subsets. Therefore, an ensemble feature selection technique is proposed to obtain the optimal feature set based on major voting scores from four feature subsets. DNN models, along with the ensemble feature selection technique, outperformed in estimating the systolic blood pressure (SBP) and diastolic blood pressure (DBP) compared to previously reported approaches that rely only on the PPG signal. The coefficient of determination ( ) and mean absolute error (MAE) of the proposed algorithm are 0.962 and 2.480 mmHg, respectively, for SBP and 0.955 and 1.499 mmHg, respectively, for DBP. The proposed approach meets the Advancement of Medical Instrumentation standard for SBP and DBP estimations. Additionally, according to the British Hypertension Society standard, the results attained Grade A for both SBP and DBP estimations. It concludes that BP can be estimated more accurately using the optimal feature set and DNN models. The proposed algorithm has the potential ability to facilitate mobile healthcare devices to monitor continuous BP.

MEMS Fingertip Strain Plethysmography for Cuffless Estimation of Blood Pressure.

To develop a cuffless method for estimating blood pressure (BP) from fingertip strain plethysmography (SPG) recordings. A custom-built micro-electromechanical systems (MEMS) strain sensor is employed to record heartbeat-induced vibrations at the fingertip. An XGboost regressor is then trained to relate SPG recordings to beat-to-beat systolic BP (SBP), diastolic BP (DBP), mean arterial pressure (MAP) values. For this purpose, each SPG segment in this setup is represented by a feature vector consisting of cardiac time interval, amplitude features, statistical properties, and demographic information of the subjects. In addition, a novel concept, coined geometric features, are introduced and incorporated into the feature space to further encode the dynamics in SPG recordings. The performance of the regressor is assessed on 32 healthy subjects through 5-fold cross-validation (5-CV) and leave-subject-out cross validation (LSOCV). Mean absolute errors (MAEs) of 3.88 mmHg and 5.45 mmHg were achieved for DBP and SBP estimations, respectively, in the 5-CV setting. LSOCV yielded MAEs of 8.16 mmHg for DBP and 16.81 mmHg for SBP. Through feature importance analysis, 3 geometric and 26 integral-related features introduced in this work were identified as primary contributors to BP estimation. The method exhibited robustness against variations in blood pressure level (normal to critical) and body mass index (underweight to obese), with MAE ranges of [1.28, 4.28] mmHg and [2.64, 7.52] mmHg, respectively. The findings suggest high potential for SPG-based BP estimation at the fingertip. This study presents a fundamental step towards the augmentation of optical sensors that are susceptible to dark skin tones.

Measuring blood pressure from Korotkoff sounds as the brachial cuff inflates on average provides higher values than when the cuff deflates

Objectives. In this study, we test the hypothesis that if, as demonstrated in a previous study, brachial arteries exhibit hysteresis as the occluding cuff is deflated and fail to open until cuff pressure (CP) is well below true intra-arterial blood pressure (IAPB), estimating systolic (SBP) and diastolic blood pressure (DBP) from the presence of Korotkoff sounds (KS) as CP increases may eliminate these errors and give more accurate estimates of SBP and DBP relative to IABP readings. Approach. In 62 subjects of varying ages (45.1 ± 19.8, range 20.6–75.8 years), including 44 men (45.3 ± 19.4, range 20.6–75.8 years) and 18 women (44.4 ± 21.4, range 20.9–75.3 years), we sequentially recorded SBP and DBP both during cuff inflation and cuff deflation using KS. Results. There was a significant (p < 0.0001) increase in SBP from 122.8 ± 13.2 to 127.6 ± 13.0 mmHg and a significant (p = 0.0001) increase in DBP from 70.0 ± 9.0 to 77.5 ± 9.7 mmHg. Of the 62 subjects, 51 showed a positive increase in SBP (0–14 mmHg) and 11 subjects showed a reduction (−0.3 to −7 mmHg). The average differences for SBP and DBP estimates derived as the cuff inflates and those derived as the cuff deflates were 4.8 ± 4.6 mmHg and 2.5 ± 4.6 mmHg, not dissimilar to the differences reported between IABP and non-invasive blood pressure measurements. Although we could not develop multiparameter linear or non-linear models to explain this phenomenon we have clearly demonstrated through ANOVA tests that both body mass index (BMI) and pulse wave velocity are implicated, supporting the hypothesis that the phenomenon is associated with age, higher BMI and stiffer arteries. Significance. The implications of this study are that brachial sphygmomanometry carried out during cuff inflation could be more accurate than measurements carried out as the cuff deflates. Further research is required to validate these results with IAPB measurements.

Evaluation of the oscillometric method for noninvasive blood pressure measurement during cuff deflation and cuff inflation with reference to intra-arterial blood pressure.

There is little quantitative clinical data available to support blood pressure measurement accuracy during cuff inflation. In this study of 35 male and 5 female lightly anaesthetized subjects aged 64.1 ± 9.6 years, we evaluate and compare the performance of both the oscillometric ratio and gradient methods during cuff deflation and cuff inflation with reference to intra-arterial measurements. We show that the oscillometric waveform envelopes (OWE), which are key to both methods, exhibit significant variability in both shape and smoothness leading to at least 15% error in the determination of mean pressure (MP). We confirm the observation from our previous studies that K1 Korotkoff sounds underestimate systolic blood pressure (SBP) and note that this underestimation is increased during cuff inflation. The estimation of diastolic blood pressure (DBP) is generally accurate for both the ratio and the gradient method, with the latter showing a significant increase during inflation. Since the gradient method estimates SBP and DBP from points of maximum gradient on each OWE recorded, it may offer significant benefits over the ratio method. However, we have shown that the ratio method can be optimized for any data set to achieve either a minimum mean error (ME) of close to 0 mmHg or minimum root mean square error (RMSE) with standard deviation (SD) of <5.0 mmHg. We conclude that whilst cuff inflation may offer some advantages, these are neither significant nor substantial, leaving as the only benefit, the potential for more rapid measurement and less patient discomfort.

A continuous cuffless blood pressure measurement from optimal PPG characteristic features using machine learning algorithms

Background and objectiveHypertension is a potentially dangerous health condition that can be detected by measuring blood pressure (BP). Blood pressure monitoring and measurement are essential for preventing and treating cardiovascular diseases. Cuff-based devices, on the other hand, are uncomfortable and prevent continuous BP measurement. MethodsIn this study, a new non-invasive and cuff-less method for estimating Systolic Blood Pressure (SBP), Mean Arterial Pressure (MAP), and Diastolic Blood Pressure (DBP) has been proposed using characteristic features of photoplethysmogram (PPG) signals and nonlinear regression algorithms. PPG signals were collected from 219 participants, which were then subjected to preprocessing and feature extraction steps. Analyzing PPG and its derivative signals, a total of 46 time, frequency, and time-frequency domain features were extracted. In addition, the age and gender of each subject were also included as features. Further, correlation-based feature selection (CFS) and Relief F feature selection (ReliefF) techniques were used to select the relevant features and reduce the possibility of over-fitting the models. Finally, support vector regression (SVR), K-nearest neighbour regression (KNR), decision tree regression (DTR), and random forest regression (RFR) were established to develop the BP estimation model. Regression models were trained and evaluated on all features as well as selected features. The best regression models for SBP, MAP, and DBP estimations were selected separately. ResultsThe SVR model, along with the ReliefF-based feature selection algorithm, outperforms other algorithms in estimating the SBP, MAP, and DBP with the mean absolute error of 2.49, 1.62 and 1.43 mmHg, respectively. The proposed method meets the Advancement of Medical Instrumentation standard for BP estimations. Based on the British Hypertension Society standard, the results also fall within Grade A for SBP, MAP, and DBP. ConclusionThe findings show that the method can be used to estimate blood pressure non-invasively, without using a cuff or calibration, and only by utilizing the PPG signal characteristic features.

Photoplethysmogram-based heart rate and blood pressure estimation with hypertension classification

A photoplethysmogram (PPG) is an optically-derived signal that records the variation in blood volume within the microvasculature. Certain cardiovascular diseases (CVDs) are symptomatic of damaged blood vessels and problems in blood flow, including hypertension. While software implementations for heart rate and blood pressure estimation exist, point-of-care systems demand hardware-based implementations for real-time estimations to be useful for CVD detection. In this study, digital field programmable gate array (FPGA) based systems are developed for heart rate and blood pressure estimation from PPG signals by means of linear regression. In addition to the blood pressure estimation system, we present a prototype hypertension level detection system that achieves 92.42% accuracy while consuming 0.364 W of power. The Mean Absolute Error (MAE) ± Standard Deviation (SD) for heart rate estimation is 3.17 ± 2.79 beat per minute. The corresponding results for systolic and diastolic blood-pressure estimation are 4.75 ± 2.78 and 3.34 ± 2.60, respectively. The prototype can be further extended to wearable devices and medical equipment in the future.

PPG SİNYALLERİNİN TQWT TABANLI AYRIŞTIRILMASI YOLUYLA KAN BASINCI VE KALP ATIŞ HIZI TAHMİNİ

Photoplethysmography (PPG) signals are getting more popular and promising for medical applications because of the non-invasive, fast, and simple recording techniques. Using PPG signals for monitoring the blood pressure (BP) and heart rate (HR) levels instead of traditional invasive and cuff-based measurement techniques is possible and continuous tracing of BP and HR levels can be accomplished with high measurement accuracies. These developments are very important and helpful, especially for people suffering from high tension and cardiac problems. In this study, we propose to use Tunable Q-factor Wavelet Transform (TQWT) for decomposing the PPG signals into sub-signals and extracting some statistical features from each of the sub-signals and main signal. Artificial Neural Networks (ANN), Random Forests (RF), and Support Vector Machines (SVM) algorithms are employed to estimate diastolic blood pressure (DBP), systolic blood pressure (SBP), and heart rate (HR) values. PPG signals, DBP, SBP, and HR values which were measured with traditional methods were obtained from the open dataset of Guilin People’s Hospital of China. This dataset includes information of 219 individuals. Each machine learning method was applied to the features separately, and the results of the regression analysis were interpreted by using the error rates and correlations between the actual and estimated values. Results show that the RF algorithm is more successful than ANN and SVM for the estimation of DBP, SBP, and HR levels.

Development of continuous cuffless blood pressure prediction platform using enhanced 1-D SENet–LSTM

In this study, we propose a blood pressure estimation that employs a combined 1-D squeeze and excitation network (SENet-LSTM) architecture. Combining photoplethysmography (PPG) and electrocardiogram (ECG) signals can provide more helpful feature information. The original signals were processed by removing the noise and artifacts. By introducing SE block, the ability to learn features is enhanced, and an end-to-end approach is used to realize the automatic learning process. Additionally, the algorithm has the ability to recover arterial blood pressure (ABP) waveforms from blood pressure readings. The results of this study met the Grade A standard for diastolic blood pressure (DBP), systolic blood pressure (SBP), and mean arterial pressure (MAP) set by the British Hypertension Society (BHS) and were also in accordance with the Association for the Advancement of Medical Instrumentation (AAMI) standard. According to the DBP and SBP ranges, blood pressure is divided into the following categories: normal blood pressure, prehypertension, and hypertension. For the classification of Hypertension, Normotension, and Prehypertension using SBP, we achieved accuracy of 94% and F1 scores of 0.92, 0.94, and 0.85. For the results obtained using DBP classification the overall accuracy was 91%, with F1 scores of 0.85, 0.98, and 0.78. When compared to other studies, the classifier results generated by SBP and DBP estimates based on the 1-D SENet-LSTM method improved accuracy by 2% and 11%, respectively.

Photoplethysmography-based cuffless blood pressure estimation: an image encoding and fusion approach

Objective. Photoplethysmography (PPG) is a promising wearable technology that detects volumetric changes in microcirculation using a light source and a sensor on the skin’s surface. PPG has been shown to be useful for non-invasive blood pressure (BP) measurement. Deep learning-based BP measurements are now gaining popularity. However, almost all methods focus on 1D PPG. We aimed to design an end-to-end approach for estimating BP using image encodings from a 2D perspective. Approach. In this paper, we present a BP estimation approach based on an image encoding and fusion (BP-IEF) technique. We convert the PPG into five image encodings and use them as input. The proposed BP-IEF consists of two parts: an encoder and a decoder. In addition, three kinds of well-known neural networks are taken as the fundamental architecture of the encoder. The decoder is a hybrid architecture that consists of convolutional and fully connected layers, which are used to fuse features from the encoder. Main results. The performance of the proposed BP-IEF is evaluated on the UCI database in both non-mixed and mixed manners. On the non-mixed dataset, the root mean square error and mean absolute error for systolic BP (SBP) are 13.031 mmHg and 9.187 mmHg respectively, while for diastolic BP (DBP) they are 5.049 mmHg and 3.810 mmHg. On the mixed dataset, the corresponding values for SBP are 4.623 mmHg and 3.058 mmHg, while for DBP the values are 2.350 mmHg and 1.608 mmHg. In addition, both SBP and DBP estimation on the mixed dataset achieved grade A compared to the British Hypertension Society standard. The DBP estimation on the non-mixed dataset also achieved grade A. Significance. The results indicate that the proposed approach has the potential to improve on the current mobile healthcare for cuffless BP measurement.

Hybrid Deep Morpho-Temporal Framework for Oscillometric Blood Pressure Measurement.

Oscillometric blood pressure (BP) measurement devices are widely utilized as the primary automated BP measurement tools in non-specialist environments. However, their accuracy and reliability vary under different settings and for different age groups and health conditions. An essential constraint of current oscillometric BP measurement devices is their analysis algorithms' incapacity to capture the BP information encoded in the pattern of recorded oscillometric pulses to its fullest extent. In this paper, we propose a new 2D oscillometric data representation that enables a full characterization of arterial system and empowers the application of deep learning to extract the most informative features correlated with BP. A hybrid convolutional-recurrent neural network was developed to capture the oscillometric pulses morphological information as well as their temporal evolution over the cuff deflation period from the 2D structure, and estimate BP. The performance of the proposed method was verified on three oscillometric databases collected from the wrist and upper arms of 245 individuals. It was found that it achieves a mean error and a standard deviation of error of as low as 0.08 mmHg and 2.4 mmHg in the estimation of systolic BP, and 0.04 mmHg and 2.2 mmHg in the estimation of diastolic BP, respectively. Our proposed method outperformed the state-of-the-art techniques and satisfied the current international standards for BP monitors by a wide margin. The proposed method shows promise toward robust and objective BP estimation in a variety of patients and monitoring situations.

Beat-to-beat continuous blood pressure estimation with optimal feature set of PPG and ECG signals using deep recurrent neural networks

Aim: Continuous blood pressure (BP) monitoring can provide invaluable information for cardiovascular disease (CVD) diagnosis. The purpose of this study is to develop a deep recurrent neural network (RNN) model with an optimal feature set of photoplethysmogram (PPG) and electrocardiogram (ECG) signals for continuous BP estimation. Methods: This paper presents a novel deep recurrent neural network (RNN), which consists of 2-layered bidirectional Long Short-term Memory (Bi-LSTM) and 6-layered LSTM networks. It is used to estimate BP based on the optimal feature set of PPG and ECG signals. In this work, the optimal feature set is determined using five different feature selection methods. Results: The proposed method is evaluated based on 660 subjects from the University of California Irvine (UCI) machine learning repository. The RNN model with optimal feature set achieved root mean square error (RMSE) of 3.223 and 1.781 mmHg for systolic BP (SBP) and diastolic BP (DBP), respectively. It also showed mean absolute error (MAE) of 2.514 and 1.383 mmHg for SBP and DBP, respectively. Regarding the British Hypertension Society (BHS) standard, the results attained grade A for the estimation of SBP and DBP. Conclusion: The experimental results suggest that the proposed deep RNN model with an optimal feature set can improve the performance of BP prediction. Thus, it is possible to further apply our proposed method to develop a wearable device for real-time BP monitoring.

Noncontact Blood Pressure Estimation Using BP-Related Cardiovascular Knowledge: An Uncalibrated Method Based on Consumer-Level Camera

<italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Objective</i> : The tiny change of skin color, caused by heartbeat, can be captured with consumer-level cameras by using the imaging photoplethysmography (iPPG) technique, offering a non-contact way of extracting pulse signals. The pulse signals have been demonstrated to contain information of human physiological characteristics and have been used for blood pressure (BP) estimation in recent years. According to BP-related cardiovascular knowledge, this paper presents a new method for BP estimation based on the iPPG pulse signals, featured by incorporating cardiovascular characteristics including heart rate (HR), stroke volume (SV), elasticity of vessel walls (EVW), and peripheral vascular resistance (PVR). Correlations between the systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse pressure (PP), and the cardiovascular characteristics are extracted, which facilitates the selection of pulse features consistent with BP properties. Based on the selected features, two Bayesian neural network (BNN) models are constructed for the estimation of SBP and DBP respectively, where the machine learning (ML) uncertainty of the estimation is also evaluated. This method is uncalibrated that means it can work without additional information except for the videos from the camera. The proposed method has been tested on 220 patients with a history of cardiovascular diseases. Errors of the BP estimation are 9±13 (MAE±STD) mmHg for SBP, 7±10 (MAE±STD) mmHg for DBP, and the ML uncertainty of the estimation indicates reliability of the proposed method.

The impact of Ramadan fasting on the metabolic syndrome severity in relation to ethnicity and sex: Results of a systematic review and meta-analysis

AimsThe primary goal of this meta-analysis was to examine the changes in various components of metabolic syndrome (MetS) in healthy adults who observed Ramadan fasting (RF) before Ramadan (T1) and at the end of RF (T2). A secondary goal was to assess the impact of RF on MetS severity in various ethnic and sex groups using the MetS z-score. Data synthesisUsing PRISMA2020, seven databases were searched for relevant studies published between January 1950 and March 2022. Data extraction involved high-density lipoprotein cholesterol (HDL), triglycerides (TG), fasting blood glucose (FBG), waist circumference (WC), systolic blood pressure (SBP), and diastolic blood pressure (DBP) for T1 and T2, respectively. The MetS z-score was computed according to international diabetes federation criteria. At T1, the pooled estimates of HDL, TG, FBG, WC, SBP, DBP, and MAP were 1.20 [1.13; 1.27] mmol/L, 1.32 [1.23; 1.42] mmol/L, 4.98 [4.82; 5.15] mmol/L, 87.21 [84.21; 90.21] Cm, 114.22 [101.45; 126.99] mmHg, 76.80 [70.12; 83.47] mmHg, and 89.27 [80.56; 97.98] mmHg, respectively. At T2, the pooled estimates of HDL, TG, FBG, WC, SBP, DBP, and MAP were 1.24 [1.18; 1.31] mmol/L, 1.24 [1.14; 1.34] mmol/L, 4.77 [4.55; 4.99] mmol/L, 85.73 [82.83; 88.64] Cm, 109.48 [97.20; 121.75] mmHg, 74.43 [68.01; 80.85] mmHg, and 86.11 [77.74; 94.48] mmHg, respectively. The MetS z-score showed improvement at T2 for all ethnic groups and both sexes by −0.22 [-0.24; −0.01]. ConclusionsThe current meta-analysis suggests that the RF positively impact the MetS components and the overall MetS z-score. PROSPERO registration numberID CRD42022329297 Open Science Framework IdentifierDOI 10.17605/OSF.IO/U9H7T

Joint Regression Network and Window Function-Based Piecewise Neural Network for Cuffless Continuous Blood Pressure Estimation Only Using Single Photoplethesmogram

The blood pressure (BP) is generally measured using a cuff based sphygmomanometer. However, it is inconvenient to be used. Recently, an alternative solution only using the photoplethesmograms (PPGs) was proposed. In this case, the continuous BP estimation could be performed. First, the features were extracted from the PPGs. Then, a regression network was employed to estimate the BP values. Nevertheless, the accuracy of this approach was not so high. In order to improve the estimation accuracy, this paper proposes to cascade a two layer piecewise neural network to the output of the existing regression network to correct the estimation error. In particular, the overall system is a three layer network. The first layer of the network is the existing regression network. It generates the initial estimated BP values. The second layer of the network consists of the window functions. It segments the range of the BP values into various regions for the further processing. The final layer of the network performs the estimation correction. The performance of our proposed network is evaluated via two practical datasets and three common regression networks including the three layer artificial neural network (ANN) based regression network, the random forest (RF) based regression network and the support vector regression (SVR) based network. For the first dataset, our proposed method with the RF model and the piecewise neural network achieves the systolic BP (SBP) estimation error and the diastolic BP (DBP) estimation error at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$3.01{\pm }2.22$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.926 and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$4.43{\pm }3.37$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.935, respectively. On the other hand, the conventional RF model without the piecewise neural network achieves the SBP estimation error and the DBP estimation error at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$5.34{\pm }4.08$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.740 and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$5.89{\pm }4.98$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.840, respectively. For the second dataset, our proposed method with the RF model and the piecewise neural network achieves the SBP estimation error and the DBP estimation error at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$7.91{\pm }8.06$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.876 and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$3.47{\pm }5.59$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.859, respectively. On the other hand, the conventional RF model without the piecewise neural network achieves the SBP estimation error and the DBP estimation error at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$9.77{\pm }9.01$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.805 and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$7.08{\pm }5.55$ </tex-math></inline-formula> mmHg with the correlation coefficient at 0.612, respectively. It can be seen that our proposed network yields the estimated BP values highly correlated to the reference BP values. Also, our proposed method yields the higher accuracies compared to the existing networks. This demonstrates the effectiveness of our proposed network.

Continuous PPG-Based Blood Pressure Monitoring Using Multi-Linear Regression.

In this work, we present a photoplethy smography-based blood pressure monitoring algorithm (PPG-BPM) that solely requires a photoplethysmography (PPG) signal. The technology is based on pulse wave analysis (PWA) of PPG signals retrieved from different body locations to continuously estimate the systolic blood pressure (SBP) and the diastolic blood pressure (DBP). The proposed algorithm extracts morphological features from the PPG signal and maps them to SBP and DBP values using a multiple linear regression (MLR) model. The performance of the algorithm is evaluated on the publicly available Multiparameter Intelligent Monitoring in Intensive Care (MIMIC I) database. We utilize 28 data-sets (records) that contain both PPG and brachial arterial blood pressure (ABP) signals. The collected PPG and ABP signals are synchronized and divided into intervals of 30 seconds, called epochs. In total, we utilize 47153 clean 30-second epochs for the performance analysis. Out of the 28 data-sets, we use only 2 data-sets with a total of 2677 clean 30-second epochs to build the MLR model of the algorithm. For the SBP, a mean absolute error (MAE) of 6.10 mmHg between the arterial line and the PPG-based values are achieved, with a Pearson correlation coefficient r = 0.90, p = .001. For the DBP, and an MAE of 4.65 mmHg between the arterial line and the PPG-based values are achieved, with a Pearson correlation coefficient r = 0.85, p .001. We also use a binary classifier for the BP values with the positives indicating SBP ≥ 130 mmHg and/or DBP ≥ 80 mmHg and the negatives indicating otherwise. The classifier results generated by the PPG-based SBP and DBP estimates achieve a sensitivity and a specificity of 79.11% and 92.37%, respectively.

Concatenated convolutional neural network model for cuffless blood pressure estimation using fuzzy recurrence properties of photoplethysmogram signals

Due to the importance of continuous monitoring of blood pressure (BP) in controlling hypertension, the topic of cuffless BP estimation has been widely studied in recent years. A most important approach is to explore the nonlinear mapping between the recorded peripheral signals and the BP values which is usually conducted by deep neural networks. Because of the sequence-based pseudo periodic nature of peripheral signals such as photoplethysmogram (PPG), a proper estimation model needed to be equipped with the 1-dimensional (1-D) and recurrent layers. This, in turn, limits the usage of 2-dimensional (2-D) layers adopted in convolutional neural networks (CNN) for embedding spatial information in the model. In this study, considering the advantage of chaotic approaches, the recurrence characterization of peripheral signals was taken into account by a visual 2-D representation of PPG in phase space through fuzzy recurrence plot (FRP). FRP not only provides a beneficial framework for capturing the spatial properties of input signals but also creates a reliable approach for embedding the pseudo periodic properties to the neural models without using recurrent layers. Moreover, this study proposes a novel deep neural network architecture that combines the morphological features extracted simultaneously from two upgraded 1-D and 2-D CNNs capturing the temporal and spatial dependencies of PPGs in systolic and diastolic BP estimation. The model has been fed with the 1-D PPG sequences and the corresponding 2-D FRPs from two separate routes. The performance of the proposed framework was examined on the well-known public dataset, namely, multi-parameter intelligent in Intensive Care II. Our scheme is analyzed and compared with the literature in terms of the requirements of the standards set by the British Hypertension Society (BHS) and the Association for the Advancement of Medical Instrumentation (AAMI). The proposed model met the AAMI requirements, and it achieved a grade of A as stated by the BHS standard. In addition, its mean absolute errors and standard deviation for both systolic and diastolic blood pressure estimations were considerably low, 3.05 ± 5.26 mmHg and 1.58 ± 2.6 mmHg, in turn.

A Novel Clustering-Based Algorithm for Continuous and Noninvasive Cuff-Less Blood Pressure Estimation.

Extensive research has been performed on continuous and noninvasive cuff-less blood pressure (BP) measurement using artificial intelligence algorithms. This approach involves extracting certain features from physiological signals, such as ECG, PPG, ICG, and BCG, as independent variables and extracting features from arterial blood pressure (ABP) signals as dependent variables and then using machine-learning algorithms to develop a blood pressure estimation model based on these data. The greatest challenge of this field is the insufficient accuracy of estimation models. This paper proposes a novel blood pressure estimation method with a clustering step for accuracy improvement. The proposed method involves extracting pulse transit time (PTT), PPG intensity ratio (PIR), and heart rate (HR) features from electrocardiogram (ECG) and photoplethysmogram (PPG) signals as the inputs of clustering and regression, extracting systolic blood pressure (SBP) and diastolic blood pressure (DBP) features from ABP signals as dependent variables, and finally developing regression models by applying gradient boosting regression (GBR), random forest regression (RFR), and multilayer perceptron regression (MLP) on each cluster. The method was implemented using the MIMIC-II data set with the silhouette criterion used to determine the optimal number of clusters. The results showed that because of the inconsistency, high dispersion, and multitrend behavior of the extracted features vectors, the accuracy can be significantly improved by running a clustering algorithm and then developing a regression model on each cluster and finally weighted averaging of the results based on the error of each cluster. When implemented with 5 clusters and GBR, this approach yielded an MAE of 2.56 for SBP estimates and 2.23 for DBP estimates, which were significantly better than the best results without clustering (DBP: 6.27, SBP: 6.36).