Diameter Polystyrene Microspheres Research Articles

Surface light propagating in a dielectric thin film generated via micro-spheres.

Light orbiting through total internal reflection within dielectric spheres or disks is called the whispering gallery mode (WGM). Recently, we have reported anomalously enhanced Raman spectra at the periphery of 3 µm diameter polystyrene (PS) microspheres on a silicon nitride (SiN) film using Raman microscopy. Here, we performed Raman measurements and optical simulation analysis of 3 µm PS spheres on a SiN film using a three-dimensional (3D) model and found that the circumferential light was generated up to 650 nm from the outer circumference of the sphere. Furthermore, a portion of the light circling the sphere travelled to the SiN film and became surface propagating light. These properties are expected to lead to development of new devices such as highly sensitive sensors, quantum optical qubits, and optical integrated circuits.

Robust and High‐Efficient Fabrication of Gold Triangles Array on Optical Fiber Tip for Laser Mode Locking

AbstractThe plasmonic metasurfaces composed of gold triangles (GTAs) array have been directly fabricated onto the optical fiber tip (OFT) using a modified self‐assembly nanosphere lithography technology, featuring intrinsic good compatibility, high‐quality, low‐cost, time‐saving, and large‐scale fabrication. Then, the first experimental realization of all‐fiber mode‐locked lasers based on GTAs array as saturable absorber is reported. The linear transmission spectra of the different‐sized GTAs array fabricated using different‐sized polystyrene (PS) microspheres (diameter: 1000, 1100, 1300, and 1600 nm) demonstrate highly tunable localized surface plasmon resonance (LSPR) across a broad spectral range from 1295 to 1985 nm, and its nonlinear transmission spectra present a larger modulation depth (maximum: 11.5%) when the LSPR is close to the 1550 nm. When inserting the GTAs@OFT samples fabricated using 1100‐nm diameter and 1300‐nm diameter PS microspheres into a fiber‐ring cavity, the all‐fiber picosecond (≈3.7 ps) soliton mode‐locked lasers with high output power (>10 mW) are successfully achieved at optical communication wavelength of 1.5 µm. The findings expand the scopes of plasmonic metasurface composed of GTAs array as saturable absorber, and may pave the way for mass production of ultrafast all‐fiber lasers and novel all‐fiber devices for optical communications, bio‐sensing, and bio‐imaging.

Strategy for optimizing experimental settings for studying low atomic number colloidal assemblies using liquid phase scanning transmission electron microscopy

Observing processes of nanoscale materials of low atomic number is possible using liquid phase electron microscopy (LP-EM). However, the achievable spatial resolution (d) is limited by radiation damage. Here, we examine a strategy for optimizing LP-EM experiments based on an analytical model and experimental measurements, and develop a method for quantifying image quality at ultra low electron dose De using scanning transmission electron microscopy (STEM). As experimental test case we study the formation of a colloidal binary system containing 30 nm diameter SiO2 nanoparticles (SiONPs), and 100 nm diameter polystyrene microspheres (PMs). We show that annular dark field (DF) STEM is preferred over bright field (BF) STEM for practical reasons. Precise knowledge of the material's density is crucial for the calculations in order to match experimental data. To calculate the detectability of nano-objects in an image, the Rose criterion for single pixels is expanded to a model of the signal to noise ratio obtained for multiple pixels spanning the image of an object. Using optimized settings, it is possible to visualize the radiation-sensitive, hierarchical low-Z binary structures, and identify both components.

Raman scattering enhancement of dielectric microspheres on silicon nitride film

Circulating light in the total internal reflection within dielectric spheres or disks is called the whispering gallery mode (WGM), which by itself is highly sensitive to its surface and capable of detecting viruses and single atomic ions. The detection site of the sensors using WGM is created by the evanescent light from the circulating light inside spheres. Here we report anomalous Raman scattering enhancement in dielectric microspheres on a silicon nitride (SiN) film. This Raman enhancement occurs at the periphery of the spheres, and a similar ring of light was also observed under a fluorescence microscope. This is caused by the light circulating around the dielectric spheres as in the WGM. We observed anomalously enhanced Raman spectrum at the periphery of 3 μm diameter polystyrene (PS) microspheres on a SiN film using confocal laser Raman microscopy. The wavelength intensity of this enhanced Raman spectrum was accompanied by periodic changes due to interference. These features may lead to the development of high-sensitive sensors and optical devices.

Single-Beam Acoustic Tweezer Prepared by Lead-Free KNN-Based Textured Ceramics.

Acoustic tweezers for microparticle non-contact manipulation have attracted attention in the biomedical engineering field. The key components of acoustic tweezers are piezoelectric materials, which convert electrical energy to mechanical energy. The most widely used piezoelectric materials are lead-based materials. Because of the requirement of environmental protection, lead-free piezoelectric materials have been widely researched in past years. In our previous work, textured lead-free (K, Na)NbO3 (KNN)-based piezoelectric ceramics with high piezoelectric performance were prepared. In addition, the acoustic impedance of the KNN-based ceramics is lower than that of lead-based materials. The low acoustic impedance could improve the transmission efficiency of the mechanical energy between acoustic tweezers and water. In this work, acoustic tweezers were prepared to fill the gap between lead-free piezoelectric materials research and applications. The tweezers achieved 13 MHz center frequency and 89% −6 dB bandwidth. The −6 dB lateral and axial resolution of the tweezers were 195 μm and 114 μm, respectively. Furthermore, the map of acoustic pressure measurement and acoustic radiation calculation for the tweezers supported the trapping behavior for 100 μm diameter polystyrene microspheres. Moreover, the trapping and manipulation of the microspheres was achieved. These results suggest that the KNN-based acoustic tweezers have a great potential for further applications.

Multi-scattering software part II: experimental validation for the light intensity distribution

This article, Part II of an article series on GPU-accelerated Monte Carlo simulation of photon transport through turbid media, focuses on the validation of the online software Multi-Scattering. While Part I detailed the implementation of the computational model, simulated and experimental results are now compared for the distribution of the scattered light intensity. The scattering phantoms prepared here are aqueous dispersions of polystyrene microspheres of diameter D = 0.5, 2 and 5 μm and at various concentrations, resulting in optical depth ranging from OD = 1 to 17.5. The Lorenz-Mie scattering phase functions used in the simulations have been verified experimentally at low particle concentrations by analyzing the angular light intensity distribution at the Fourier plane of a collecting lens. The validation approach herein accounts for the specific light collection and image formation by the camera. The front and side surfaces of the medium are imaged and the corresponding light intensity distributions are compared qualitatively and quantitatively. It is concluded that the model enables reliable simulations over the tested parameters, offering predictive simulations of transmitted intensities with a mean relative error ≤~19% over the full range. The online software is available at: https://multi-scattering.com/.

Acoustic Control of Directed Assembly in Microfluidic Devices

A combined top-down/bottom-up microfluidic assembly system is demonstrated in which microspheres undergo directed assembly within microchannels. The approach is adapted from macroscale templated assembly by selective removal (TASR), in which high-frequency acoustic excitations drive selective assembly into shape- and size-matched wells patterned in a planar surface. A PDMS layer patterned with microchannels is bonded to a PDMS layer molded to define assembly wells. A suspension of 10 μm diameter polystyrene microspheres is flowed into the microchannels, and an external, high-frequency ultrasonic transducer circulates the microspheres within the channels and removes them from everywhere except the size-matched wells. Microspheres are successfully assembled in wells inside the microchannels with yields of up to 90%. Smaller channel dimensions reduce assembly yield in part because smaller internal channel volumes reduce the availability of microspheres relative to assembly wells. In addition, reducing channel width below about 500 μm is shown to be an independent predictor of low assembly yields; this is attributed to the physics of acoustic streaming flow under the acoustic excitation. Assembly yield is largely independent of the location of the assembly wells within the microchannels, and selectivity is confirmed by low assembly yield of 6 μm diameter microspheres into the larger wells.

Flow induced particle separation and collection through linear array pillar microfluidics device.

Particle filtration and concentration have great significance in a multitude of applications. Physical filters are nearly indispensable in conventional separation processes. Similarly, microfabrication-based physical filters are gaining popularity as size-based particle sorters, separators, and prefiltration structures for microfluidics platforms. The work presented here introduces a linear combination of obstructions to provide size contrast-based particle separation. Polystyrene particles that are captured along the crossflow filters are packed in the direction of the dead-end filters. Separation of polydisperse suspension of 5 μm and 10 μm diameter polystyrene microspheres is attained with capture efficiency for larger particles as 95%. Blood suspension is used for biocharacterization of the device. A flow induced method is used to improve particle capture uniformity in a single microchannel and reduce microgap clogging to about 30%. This concept is extended to obtain semiquantification obtained by comparison of the initial particle concentration to captured-particle occupancy in a microfiltration channel.

Microfluidic diffraction phase microscopy and its application in parasites measurement

This paper proposes a method of using diffraction phase microscopy combined with microfluidic chip to quantitatively measure waterborne parasites. A diffraction phase microscopy system is built up by combining interferometry with optical microscope to achieve high sensitivity real-time measurement of parasites. Based on soft lithographic techniques, a double-layered microfluidic chip with U-shaped trapping structures is designed and fabricated for high throughput single parasites trapping. Ficoll solution with the same refractive index as polydimethylsiloxane (PDMS) is introduced into the microfluidic chamber to eliminate significant artifacts in phase imaging originating from diffraction at the edges of trapping structures. The accuracy of the system is verified using standard polystyrene microspheres of different diameters, and the error of maximum phase shift does not exceed 3%. 100 Giardia Lamblia (G. Lamblia) cysts and 100 Cryptosporidium Parvum (C. Parvum) oocysts are measured using this system. The phase maps of the parasites are obtained from the interferograms. The morphological parameters and quantitative optical volume difference distribution of the two kind of waterborne parasites are obtained by analyzing the quantitative phase maps. Quantitative data provides the basis for understanding their physiological characteristics. The microfluidic diffraction phase microscopy system has simple structure, good stability and high measurement accuracy, and has great potential for real-time monitoring and label-free quantitative studies of single microorganism.

Low coherence digital holography microscopy based on the Lorenz-Mie scattering model.

We demonstrate the use of low spatial and temporal coherence holography microscopy, based on the Lorenz-Mie model, using the standard tungsten-halogen lamp present in an inverted microscope. An optical model is put forward to incorporate the effect of spectral width and different incidence angles of the incident light determined by the aperture at the back focal plane of the condenser lens. The model is validated for 899 nm diameter polystyrene microspheres in glycerol, giving a resolution of 0.4% for the index of refraction and 2.2% for the diameter of the particles.

Intracellular localization and delivery of plasmid DNA by biodegradable microsphere-mediated femtosecond laser optoporation.

Micro-/nanosphere-mediated femtosecond laser cell perforation is one of the high throughput technologies used for macro-molecule-delivery into multiple cells. We have demonstrated the delivery of plasmid-DNA/liposome complexes into cells using biodegradable polymer microspheres and a femtosecond laser and investigated the intracellular localization of the complexes by delivering fluorescence-labeled plasmid-DNA/liposome complexes into cells. The utilization of liposomes increases the number of complexes delivered into the cytoplasm by laser illumination, which contributed to the increased transfection rate. In the experiment involving polystyrene (PS) microspheres of different diameters, the fluorescence of the complexes was detected in the nucleus as well as cytoplasm after laser illumination for PS microspheres of 3.0 μm diameter. The direct delivery of complexes into the nucleus is probably attributed to the enhancement of the nuclear membrane permeability by the enhanced optical field obtained close to the nucleus. These revelations on the intracellular localization of foreign DNA would provide effective laser-based transfection. Picture: Intranuclear delivery of plasmid-DNA/liposome complexes by utilizing dielectric microspheres and a femtosecond laser.

Microchannel Anechoic Corner for Microparticle Manipulation via Travelling Surface Acoustic Waves

We present a particle manipulation device composed of a pair of slanted interdigitated transducers (SIDTs) and a polydimethyl-siloxane (PDMS) microfluidic channel. Tunable travelling surface acoustic waves (TSAWs) produced by the SIDTs at desired locations are used to separate polystyrene (PS) microspheres of different diameters. The acoustic radiation force (ARF) acting on PS microspheres is estimated to predict the variable deflection of two distinct diameter microspheres that results in bi-separation of particles (3.2 and 4.8μm). Interaction of TSAWs with the fluid and propagation of leaky acoustic waves at Rayleigh angle produce an anechoic corner inside the microchannel. An adequate choice of TSAW-frequency with reference to the particles’ diameters, corresponding ARF-estimation and incorporation of the microchannel anechoic corner results in a tri-separation of PS microspheres (3, 4.2, 5 μm). The tri-separation is achieved by TSAWs − 135 MHz to deflect 5 μm particles upstream of microchannel and 175 MHz to deflect 4.2 μm particles downstream.

Real-space observation of photonic nanojet in dielectric microspheres

The three-dimensional real-space observation of photonic nanojet in different microspheres illuminated by a laser is reported. The finite-difference time-domain technique is used to perform the three-dimensional numerical simulation for the dielectric microspheres. The key parameters of photonic nanojet are measured by using a scanning optical microscope system. We reconstruct the three-dimensional real-space photonic nanojets from the collected stack of scanning images for polystyrene microspheres of 3μm, 5μm, and 8μm diameters deposited on a glass substrate. Experimental results are compared to calculations and are found in good agreement with simulation results. The full width at half-maximum of the nanojet is 331nm for a 3μm microsphere at an incident wavelength of 633nm. Our investigations show that photonic nanojets can be efficiently imaged by a microsphere and straightforwardly extended to rapidly distinguish the nano-objects in the far-field optical system.

Dynamics of microscopic objects in optical tweezers: experimental determination of underdamped regime and numerical simulation using multiscale analysis

This article presents new experimental observations and numerical simulations to investigate the dynamic behavior of micro–nano-sized objects under the influence of optical tweezers (OTs). OTs are scientific tools that can apply forces and moments to small particles using a focused laser beam. The motions of three polystyrene microspheres of different diameters, 1,950, 990, and 500 nm, are examined. The results show a transition from the overdamped motion of the largest bead to the underdamped motion of the smallest bead. The experiments are verified using a dynamic model of a microbead under the influence of Gaussian beam OTs that is modeled using ray-optics. The time required to numerically integrate the classic Newton–Euler model is quite long because a picosecond step size must be used. This run time can be reduced using a first-order model, and greatly reduced using a new multiscale model. The difference between these two models is the underdamped behavior predicted by the multiscale model. The experimentally observed underdamped behavior proves that the multiscale model predicts the actual physics of a nano-sized particle moving in a fluid environment characterized by a low Reynolds number.

Generation of scalable quasi-3D metallo-dielectric SERS substrates through orthogonal reactive ion etching

We combined two orthogonal reactive ion etching strategies on monolayers of 4 μm diameter polystyrene (PS) microspheres assembled on a planar glass substrate to create geometrically diverse but highly regular quasi-3D nano-structured arrays with centimeter length scales. Reactive ion etching (RIE) with O2/CF4 was used to selectively etch PS and, thus, to adjust the morphology of the PS mask, and CHF3 RIE was then used to etch the SiO2 substrate. The dynamic combination of these two etching procedures facilitated the realization of a wide variety of 3D-corrugated surface morphologies, including pedestals, bowls, honeycombs and blossom bud like arrays. The generated structures were then evaporated with Au films of defined thicknesses to generate metallo-dielectric arrays with tunable surface roughness. Hexagonal diffraction patterns from the fabricated structures confirm the successful realization of extended periodic hexagonal structures and the optical transmission spectra showed an efficient trapping of incident light in these ultra-rough metallo-dielectric arrays. The metallo-dielectric substrates were finally optimized for the detection of the pesticide methyl parathion in a concentration as low as 1 × 10−10 M through surface enhanced Raman spectroscopy (SERS).

Acoustic trapping with a high frequency linear phased array

A high frequency ultrasonic phased array is shown to be capable of trapping and translating microparticles precisely and efficiently, made possible due to the fact that the acoustic beam produced by a phased array can be both focused and steered. Acoustic manipulation of microparticles by a phased array is advantageous over a single element transducer since there is no mechanical movement required for the array. Experimental results show that 45 μm diameter polystyrene microspheres can be easily and accurately trapped and moved to desired positions by a 64-element 26 MHz phased array.

Photonic–Plasmonic Mode Coupling in On-Chip Integrated Optoplasmonic Molecules

We investigate photonic-plasmonic mode coupling in a new class of optoplasmonic materials that comprise dielectric microspheres and noble metal nanostructures in a morphologically well-defined on-chip platform. Discrete networks of optoplasmonic elements, referred to as optoplasmonic molecules, were generated through a combination of top-down fabrication and template-guided self-assembly. This approach facilitated a precise and controllable vertical and horizontal positioning of the plasmonic elements relative to the whispering gallery mode (WGM) microspheres. The plasmonic nanostructures were positioned in or close to the equatorial plane of the dielectric microspheres where the fields associated with the plasmonic modes can synergistically interact with the evanescent fields of the WGMs. We characterized the far-field scattering spectra of discrete optoplasmonic molecules that comprised two coupled 2.048 μm diameter polystyrene microspheres each encircled by four 148 nm diameter Au nanoparticles (NPs), through far-field scattering spectroscopy. We observed a broadening of the TE and TM modes in the scattering spectra of the optoplasmonic dimers indicative of an efficient photonic-plasmonic mode coupling between the coupled photonic modes of the WGM resonators and the localized surface plasmon modes of the NPs. Our experimental findings are supported by generalized multiple particle Mie theory simulations, which provide additional information about the spatial distributions of the near fields associated with the photonic-plasmonic hybrid modes in the investigated optoplasmonic molecules. The simulations reveal partial localization of the spectrally sharp hybrid modes outside of the WGM microspheres on the Au NPs where the local E-field intensity is enhanced by approximately 2 orders of magnitude over that of an individual Au NP.

Removal of Cryptosporidium and polystyrene microspheres from swimming pool water with sand, cartridge, and precoat filters

Cryptosporidium has caused the majority of waterborne disease outbreaks in treated recreational water venues in the USA for many years running. This research project evaluated some common US swimming pool filters for removing Cryptosporidium oocysts, 5-µm diameter polystyrene microspheres, and 1-µm diameter polystyrene microspheres. A 946 L hot tub with interchangeable sand, cartridge, and precoat filters was used at room temperature for this research. Simulated pool water for each experiment was created from Charlotte, NC (USA) tap water supplemented with alkalinity, hardness, chlorine, and a mixture of artificial sweat and urine. Precoat (i.e., diatomaceous earth and perlite) filters demonstrated pathogen removal efficiencies of 2.3 to 4.4 log (or 99.4-99.996%). However, sand and cartridge filters had average Cryptosporidium removals of 0.19 log (36%) or less. The combined low filter removal efficiencies of sand and cartridge filters along with the chlorine-resistant properties of Cryptosporidium oocysts could indicate a regulatory gap warranting further attention and having significant implications on the protection of public health in recreational water facilities. The 5-µm microspheres were a good surrogate for Cryptosporidium oocysts in this study and hold promise for use in future research projects, field trials, and/or product testing on swimming pool filters.

Disposable swim diaper retention of Cryptosporidium-sized particles on human subjects in a recreational water setting

Cryptosporidium is a chlorine-resistant protozoan parasite responsible for the majority of waterborne disease outbreaks in recreational water venues in the USA. Swim diapers are commonly used by diaper-aged children participating in aquatic activities. This research was intended to evaluate disposable swim diapers for retaining 5-μm diameter polystyrene microspheres, which were used as non-infectious surrogates for Cryptosporidium oocysts. A hot tub recirculating water without a filter was used for this research. The microsphere concentration in the water was monitored at regular intervals following introduction of microspheres inside of a swim diaper while a human subject undertook normal swim/play activities. Microsphere concentrations in the bulk water showed that the majority (50-97%) of Cryptosporidium-sized particles were released from the swim diaper within 1 to 5 min regardless of the swim diaper type or configuration. After only 10 min of play, 77-100% of the microspheres had been released from all swim diapers tested. This research suggests that the swim diapers commonly used by diaper-aged children in swimming pools and other aquatic activities are of limited value in retaining Cryptosporidium-sized particles. Improved swim diaper solutions are necessary to efficiently retain pathogens and effectively safeguard public health in recreational water venues.

Fabrication and Optical Property of PeriodicSn1-xTixO2Nanostructures Patterned by the Polystyrene Microsphere Templates

Regular arrays ofSn1-xTixO2nanostructures were fabricated by glancing angle sputter deposition onto self-assembled close-packed arrays of 200 nm diameter, 500 nm diameter, and 1 μm diameter polystyrene microspheres, respectively. The morphology of the nanostructures could be modulated by the variation of the sputtering power of Ti target and the size of polystyrene microspheres templates. Accordingly, the performance of reflection which was dependent on the morphology of nanostructures could be tuned by optimizing the parameters. The anisotropic morphology of nanoflakes achieved by adjusting the sputtering power of Ti target could generate the anisotropism of reflectance. With the increase of the PS sphere size, the anisotropism of nanostructures weakened; however, they exhibited excellent antireflection effects by creating a smaller gradient of refractive index.