Diisopropyl Methylphosphonate Research Articles

Force Fields for Molecular Modeling of Sarin and its Simulants: DMMP and DIMP.

Even three decades after signing the Chemical Weapons Convention, organophosphorus chemical warfare agents (CWAs), such as sarin, remain a threat. The development of novel methods for the detection of CWAs, protection from CWAs, and CWA decontamination motivates research on their physicochemical properties. Due to the extreme toxicity of sarin, most of the experimental studies are carried out using less toxic simulant compounds. In addition to experimental studies of sarin simulants, both sarin and simulants can be studied using in silico experiments-molecular simulations. The results of classical molecular modeling of the compounds and their agreement with experimental data rely on the force field used to describe the system. In recent years, there have been several force fields proposed for sarin and its most common simulant dimethyl methylphosphonate (DMMP). However, other simulants frequently used in experiments received less attention from the molecular simulation perspective, for example, to date, there is no force field and no simulation data for diisopropyl methylphosphonate (DIMP). Here, we compare the literature force fields for sarin and DMMP, focusing specifically on the vapor-liquid equilibrium for the pure species. We carried out Monte Carlo and molecular dynamics simulations using the existing literature force fields from which we predicted the liquid densities and vapor pressures developing the entire binodal curves. We compared the predictions to the experimental data and showed that the TraPPE-UA force field outperformed the other force fields. Thus, we extended TraPPE-UA for DIMP, utilized this force field in molecular simulations, and predicted the liquid densities and vapor pressures for a range of temperatures (binodal curve), which agreed well with the published experimental data. From the binodal, we calculated the critical properties of DIMP and demonstrated that these parameters can be used in the Peng-Robinson equation of state for this compound.

The decisive role of pericyclic reactions in the thermal decomposition of organophosphorus compounds

The understanding of the thermal decomposition chemistry of chemical warfare nerve agents is largely limited by the scarcity of kinetic data. Because of the high toxicity of these molecules, experimental determination of their chemical properties is very difficult. In the present work, a comprehensive detailed kinetic model for the decomposition of sarin and some simulants, i.e. di-isopropyl methyl phosphonate (DIMP), diethyl methylphosphonate (DEMP), and triethyl phosphate (TEP) were developed, containing possible molecular and radical pathways. The importance of unimolecular pericyclic decomposition led to evaluate precisely the rate constants of these reactions with high level theoretical calculations. The QCISD(T)/cc-PV∞QZ//B2PLYPD3/6–311+G(2d,d,p) level of theory was selected after a benchmark. The contribution of hindered rotors was included with the 1D-HR-U approach. Tunneling was taken into account for H-atom transfer. Transition state theory was used to calculate high-pressure limit rate constants and pressure dependent rate constants were calculated using Master Equation modeling. The model was validated against experimental pyrolysis and oxidation experimental data available in literature. Flux analyses showed that whatever the conditions are, the first step of decomposition of the studied phosphorus compounds are pericyclic eliminations leading to successive decompositions, whereas bond-breaking or H-atom abstraction remain negligible, even at high temperature.

Follicular pathway role in chemical warfare simulants percutaneous penetration.

Chemical warfare (CW) exposure could be fatal to military and civilians through skin contamination. Our work and others focus on investigating stratum corneum reservoir with less regards to skin appendageal routes including hair follicles. Here, C-14 CW simulants (CWS) with specific activity of 0.1 mCi/ml were tested on abdominal and scalp human cadaver skin using flow-through diffusion system. Quantitative analysis of simulants in skin compartments were performed using scintillation counter. Scalp permeation of dipropylene glycol monomethyl ether (DPGME), diisopropyl methylphosphonate (DIMP) and methyl salicylate (MeS) exceed abdominal skin by 8%, 15%, and 6% (p value < 0.05) of applied dose, respectively. DPGME and DIMP (most hydrophilic) showed earlier permeation peak time (Tmax) through scalp skin at 2 and 4 h, respectively, comparing with 6 h with abdominal skin. The percentage of applied dose of DPGME and DIMP retained in human skin membrane (SC, epidermis, and viable dermis) showed no statistically significant difference between tested abdominal and scalp skin samples (p value >0.05). The percentage of applied dose of MeS in scalp showed higher partitioning in stratum corneum and viable epidermis than abdominal skin (p value <0.05). In conclusion, human scalp showed greater total skin absorption than abdominal skin. This work points to a qualitative importance of high follicular density body regions in percutaneous penetration and suggests that transfollicular pathway might have a significant role in early stage permeation of chemical warfare simulants. However, the difference noticed here between scalp and abdominal skin could be attributed to regional variability in anatomy, physiology, and barrier characteristics.

Binding of Organophosphorus Nerve Agents and Their Simulants to Metal Salts.

Nerve agents (NAs) pose a great threat to society because they are easy to produce and are deadly in nature, which makes developing methods to detect, adsorb, and destroy them crucial. To enable the development of these methods, we report the use of first principles electronic structure calculations to understand the binding properties of NAs and NA simulants on metal salt surfaces. We report calculated Gibbs free binding energies (GBE) for four NAs (tabun (GA), sarin (GB), soman (GD), and venomous X (VX)) and five NA simulants (dimethyl methylphosphonate (DMMP), dimethyl chlorophosphate (DMCP), trimethyl phosphate (TMP), methyl dichlorophosphate (MDCP), and di-isopropyl methylphosphonate (DIMP)) on metal perchlorate and metal nitrate salts using density functional theory. Our results indicate a general trend in the binding strength of NAs and NA simulants to metal salt surfaces: MDCP < DMCP < GA < GD ≈ GB < TMP < VX ≈ DMMP < DIMP. Based on their binding properties on salt surfaces, we identify the most effective simulant for each of the studied NAs as follows: DMCP for GA, TMP for GB and GD, and DMMP for VX. To illustrate the utility of the binding energies calculated in our study, we address the design of NA sensors based on the competitive binding of NAs and liquid crystalline compounds on metal salts. We compare our results with previous experimental findings and provide a list of promising combinations of liquid crystal and metal salt systems to selectively and sensitively detect NAs. Our study highlights the great value of computational chemistry for designing selective and sensitive NA sensors while minimizing the number of very dangerous experiments involving NAs.

Ignition delay time and laminar flame speed measurements of mixtures containing diisopropyl-methylphosphonate (DIMP)

Diisopropyl-methylphosphonate (DIMP) is a common surrogate of Sarin for which a detailed kinetics mechanism was developed in 2002 (Glaude et al.— [12]). In the present paper, ignition delay times and laminar flame speeds of DIMP-based mixtures were studied around atmospheric pressure for the first time. Methane and hydrogen were used as baseline fuels, and mixtures of these fuels were doped with DIMP. The DIMP was added at 10% mol. of the fuel concentration for the shock-tube experiments (three equivalence ratios (0.5, 1.0, and 2.0) were investigated with methane). A stoichiometric DIMP/O2 mixture was also studied. For the laminar flame speed experiments, an equivalence ratio sweep was performed, and DIMP was added at 0.1% vol. of the total mixture, although DIMP was added to up to 0.5% vol. for the maximum flame speed condition with H2. Results showed that adding DIMP promotes the ignition of methane but also largely inhibits its laminar flame speed. A decrease in the flame speed with DIMP addition was observed with H2 as well, and the maximum flame speed was found to decrease linearly with the amount of DIMP added. The new results with DIMP were compared to data obtained recently for other Sarin surrogates. The influence of the structure of these surrogates on combustion properties was discussed. The kinetics model for DIMP does not capture the peculiar OH* profiles observed in the shock tube for the DIMP/O2 mixture, and the ignition delay times for the H2-DIMP mixture were very poorly predicted. On the other hand, ignition delay times for the CH4-DIMP mixture were predicted with good-to-fair agreement for most cases. A chemical analysis showed that a sub-mechanism for iso-propanol needs to be added to the mechanism. An updated detailed kinetics model, with a state-of-the-art hydrocarbon chemistry (including iso-propanol chemistry) and updates in the phosphorous chemistry and thermodynamic database was tested. This updated mechanism provides predictions that are less accurate than the original model in most cases, indicating a strong need to revisit the reactions describing the thermal decomposition of DIMP.

Detection of organophosphorus compounds using a surface acoustic wave array sensor based on supramolecular self-assembling imprinted films

In this study, diisopropyl methylphosphonate (DIMP), tributyl phosphate (TBP), and dimethyl methylphosphonate (DMMP) were selected as organophosphorus chemical warfare agent (CWA) simulants.

Hydrogen-bonding interactions in crown-(thio)urea complexes with anions, chemical warfare agents and simulants

ABSTRACTBenzocrown ethers incorporating phenyl and nitrophenyl urea and thiourea moieties were synthesised. Both the nitrophenyl urea and thiourea derivative gave a fluoride-specific colorimetric response but only the urea derivative bound the organophosphonate nerve agent simulants dimethyl methylphosphonate (DMMP) and diisopropyl methylphosphonate (DIMP). This suggested an application as sensors for the nerve agents sarin, soman and cyclosarin which release fluoride upon hydrolysis. Although no fluoride-induced response was observed in the UV-visible spectrum, binding to soman was determined by 1H NMR. DFT computational simulations suggested that the two crowns adopt different conformations in which both can bind fluoride but only the urea derivative can bind DMMP, DIMP and soman. The results show that, for this system, simulant- and soman-binding behaviours are in good agreement.

Rapid Laser-Induced Temperature Jump Decomposition of the Nerve Agent Simulant Diisopropyl Methylphosphonate under Atmospheric Conditions

We present work detailing the destruction of the nerve agent simulant diisopropyl methylphosphonate (DIMP) via rapid laser heating under atmospheric conditions. Following Nd:YAG laser ablation of l...

Acetylcholinesterase-functionalized two-dimensional photonic crystal for the sensing of G-series nerve agents.

G-series nerve agents, such as sarin, tabun, and soman, would cause tremendous harm in military and terrorist attacks, so it is necessary to develop a simple method for the rapid and efficient detection of these hazardous substances. We have developed a tunable acetylcholinesterase (AChE)-functionalized two-dimensional photonic crystal (2D PhC) for the detection of a real nerve agent, sarin. In accordance with the 2D PhC previously prepared by our group, the AChE-functionalized 2D PhC was optimized by adjustment of the amount of monomer in the hydrogel, which not only increased the sensitivity of the 2D PhC, with the detection limit decreasing by two orders of magnitude, but also ensured the structural color spanned the whole visible region in the detection range. A linear relationship between the logarithm of the sarin concentration and the particle spacing of the AChE-functionalized 2D PhC was observed from 7.1 × 10-17 to 7.1 × 10-4 mol/L. The AChE-functionalized 2D PhC also responded to mimics of G-series nerve agents, including dimethyl methylphosphonate, diisopropyl methylphosphonate, and isodipropyl methylphosphonate, to various degrees. The proposed 2D-PhC hydrogel has potential for low-cost, trace-level, and on-site monitoring of other G-series nerve agents. Graphical abstract.

Thermodynamic Studies on a Hydrogen Bonded Acidic 3,5-Bis(trifluoromethyl)phenol-functionalized Polymer as a Gas Chromatography Stationary Phase for Selectively Speciating Chemical Warfare Agents.

We describe for the first time hydrogen bonded acid (HBA) polymer, poly{methyl[3-(2-hydroxyl, 4,6-bistrifluoromethyl)phenyl]propylsiloxane}, (DKAP), as stationary phase for gas chromatography (μGC) of organophosphate (OP), chemical warfare agent (CWA) surrogates, dimethylmethylphosphonate (DMMP), diisopropylmethylphosphonate (DIMP), diethylmethylphosphonate (DEMP), and trimethylphosphate (TMP), with high selectivity. Absorption of OPs to DKAP was one-to-several orders of magnitude higher relative to commercial polar, mid-polar, and nonpolar stationary phases. We also present for the first-time thermodynamic studies on the absorption of OP vapors and quantitative binding energy data for interactions with various stationary phases. These data help to identify the best pair of hetero-polar columns for a two-dimensional GC system, employing a nonpolar stationary phase as GC1 and DKAP as the GC2 stationary phase, for selective and rapid field detection of CWAs.

Probing Coherent Vibrations of Organic Phosphonate Radical Cations with Femtosecond Time-Resolved Mass Spectrometry.

Organic phosphates and phosphonates are present in a number of cellular components that can be damaged by exposure to ionizing radiation. This work reports femtosecond time-resolved mass spectrometry (FTRMS) studies of three organic phosphonate radical cations that model the DNA sugar-phosphate backbone: dimethyl methylphosphonate (DMMP), diethyl methylphosphonate (DEMP), and diisopropyl methylphosphonate (DIMP). Upon ionization, each molecular radical cation exhibits unique oscillatory dynamics in its ion yields resulting from coherent vibrational excitation. DMMP has particularly well-resolved 45 fs ( cm) oscillations with a weak feature at 610–650 cm, while DIMP exhibits bimodal oscillations with a period of ∼55 fs and two frequency features at and 670–720 cm. In contrast, the oscillations in DEMP decay too rapidly for effective resolution. The low- and high-frequency oscillations in DMMP and DIMP are assigned to coherent excitation of the symmetric O–P–O bend and P–C stretch, respectively. The observation of the same ionization-induced coherently excited vibrations in related molecules suggests a possible common excitation pathway in ionized organophosphorus compounds of biological relevance, while the distinct oscillatory dynamics in each molecule points to the potential use of FTRMS to distinguish among fragment ions produced by related molecules.

MAPLE Assembled Acetylcholinesterase⁻Polyethylenimine Hybrid and Multilayered Interfaces for Toxic Gases Detection.

Developing a controlled method for obtaining hybrid enzymatic-based interfaces for sensing application require the use of a multiuse, reusable sensor. By controlling the interface characteristics in terms of the surface chemistry, thickness, and roughness, a tailored response toward various toxic compounds can be obtained, regarding both materials used as active surfaces and fabrication methods. Herein, we report a preliminary study on using a laser-based method (i.e., matrix-assisted pulsed laser evaporation, or MAPLE) for obtaining active polymeric–enzymatic interfaces as hybrid or layered coatings for detecting toxic vapors. The MAPLE fabrication consisted of the simultaneous alternating evaporation of layers of polyethylenimine (PEI) and acetylcholinesterase (AchE) in order to obtain active surfaces as both hybrid PEI-AchE and a PEI/AchE layered coating, respectively. The deposition processes of the polymer and enzyme were carried out using a double-target system and a Nd:YAG pulsed laser, operating at 0.45 J/cm2 fluences with a wavelength of 266 nm and a repetition rate of 10 Hz. Fourier transform infrared spectroscopy revealed no significant changes in the functional groups of both hybrid and layered coatings compared with the initial material. The thickness and roughness, as well as the morphologies of the coatings revealed by atomic force microscopy and scanning electron microscopy showed coatings thicker than two μm that had smooth surfaces and average roughness values below six nm. The sensors were tested with simulants for nerve gases and pesticides containing phosphonate ester groups, namely dimethyl methylphosphonate (DMMP) and diisopropyl methylphosphonate (DIMP), and a different sensitivity was shown to the selected chemical agents for each of the sensors. The best sensitivities for DMMP and DIMP obtained by using a PEI-AchE coated sensor are 65 kHz and 200 kHz, respectively, whereas the best sensitivity when using multilayered interfaces is 30 kHz and 10 KHz for DIMP and DMMP, respectively.

T-jump pyrolysis and combustion of diisopropyl methylphosphonate

We monitor the T-jump pyrolysis and combustion reactions of diisopropyl methylphosphonate (DIMP) via FTIR and kinetic FTIR. DIMP is heated at 10 °C/s, ∼1800 °C/s, and ∼18,000 °C/s to temperatures between 500 °C and 1200 °C in nitrogen, air, and an oxygen-rich environment. We observe propene, isopropyl methylphosphonate (IMP), and methylphosphonic acid (MPA) as final decomposition products. In addition, we identify 2-propanol in the early phase of the reaction. The results indicate that DIMP has two possible decomposition pathways: (1) A two-step decomposition process in which DIMP first transfers an H atom from the OCH(CH3)2 group to the double-bonded oxygen through a six-membered ring transition state and forms IMP and propene. Subsequently, IMP decomposes into either propene and MPA or 2-propanol and methyl(oxo)-phosphoniumolate (MOPO). (2) DIMP transfers an H atom from the OCH(CH3)2 group to the O atom of the other OCH(CH3)2 group through a different six-membered ring and simultaneously forms MOPO, propene, and 2-propanol. Our theoretical calculation indicates that the energy barriers for the two reaction pathways are 36.5 kcal/mol (pathway 1, 1st step), 49.9 kcal/mol (pathway 1, 2nd step), and 51.2 kcal/mol (pathway 2), respectively. When using a heating rate of 10 °C/s, pathway (1) is the major reaction in the system; using a heating rate of ∼18,000 °C/s, pathway (2) is the most probable reaction; and when the heating rate is ∼1800 °C/s, both pathways are observed during the early phase of the reaction. When heated in air and an oxygen-rich environment, we observe the same decomposition products plus CO and CO2.

In vitro human skin permeation and decontamination of diisopropyl methylphosphonate (DIMP) using Dermal Decontamination Gel (DDGel) and Reactive Skin Decontamination Lotion (RSDL) at different timepoints

This study compared the efficiency for in vitro human skin decontamination using DDGel and RSDL when applied at different timepoints (5 min and 90 min). Experiments were performed using in vitro human skin models, in which skin was mounted onto Flow-Through diffusion cells. The mass of 14-C DIMP removed from skin surface after decontamination was quantitated by measuring radioactivity with a liquid scintillation spectrometer. Both decontaminants removed more than 90% recovery dose of DIMP from skin compared to control group (p < 0.05). DDGel skin decontamination reduced more toxicant amount when compared to RSDL. DDGel showed slight higher decontamination ability of DIMP than RSDL and efficiently removed chemicals from the skin surface, also reduced the amount of DIMP in receptor fluid. A similar decontamination regimen with RSDL and DDGel at 90 min showed that both were still might effectively increase the time window of opportunity for treatment. Thus, DDGel can offer a potential as a next generation skin decontamination platform technology for military and civilian applications.

Gold nanoparticles-enhanced ion-transmission mass spectrometry for highly sensitive detection of chemical warfare agent simulants

Gold nanoparticles (AuNPs)-embedded paper was coupled with ion-transmission mass spectrometry (MS) to enable the highly sensitive detection of chemical warfare agent (CWA) simulants in solutions. With the assistance of a low-temperature plasma (LTP) probe, we found that AuNPs were capable to enhance the ionization efficiencies of target analytes, with MS signal intensities surprisingly undergone an 800-fold increase under optimized conditions. The interaction between AuNPs and the radiofrequency electromagnetic field was believed to promote the desorption/ionization process, resulting in the unusual signal enhancement phenomenon. Based on this finding, we established a method for the rapid analysis of two simulants of nerve agents, dimethyl methylphosphonate (DMMP) and diisopropyl methylphosphonate (DIMP), with a dynamic range from 0.5 ng/mL to 100 ng/mL and detection limits of 0.1 ng/mL and 0.3 ng/mL, respectively. As sample pretreatments have been eliminated, the developed strategy is particularly promising for the on-site detection of CWAs considering its simple and rapid analytical workflow.

Flexible Microtube Plasma (FμTP) as an Embedded Ionization Source for a Microchip Mass Spectrometer Interface.

Dielectric barrier discharges are used as soft ionization sources for mass spectrometers or ion mobility spectrometers, enabling excellent possibilities for analytical applications. A new robust and small-footprint discharge design, flexible microtube plasma (FμTP), developed as a result of ongoing miniaturization and electrode design processes, is presented in this work. This design provides major safety benefits by fitting the electrode into an inert flexible fused silica capillary (tube). Notably, in this context, the small discharge dimensions enable very low gas flows in the range of <100 mL min-1; portability; the use of hydrogen, nitrogen, and air in addition to noble gases such as helium and argon, including its mixtures with propane; and application in microchip environments. By coupling FμTP with gas chromatography/mass spectrometry, we show that the polarity principle of the new discharge design allows it to outperform established ionization sources such as dielectric barrier discharge for soft ionization (DBDI) and low-temperature plasma (LTP) at low concentrations of perfluoroalkanes in terms of sensitivity, ionization efficiency, chemical background, linear dynamic range, and limit of detection by a large margin. In negative ion mode, the limit of detection is improved by more than 3-fold compared with that of DBDI and by 8-fold compared with that of LTP. The protonation capability was evaluated by headspace measurements of diisopropyl methylphosphonate in positive ion mode, showing low fragmentation and high stability in comparison to DBDI and LTP.

Integration of paper spray ionization high-field asymmetric waveform ion mobility spectrometry for forensic applications.

Paper spray ionization (PSI) is an attractive ambient ionization source for mass spectrometry (MS) since it allows the combination of surface sampling and ionization. The minimal sample preparation inherent in this approach greatly reduces the time needed for analysis. However, the ions generated from interfering compounds in the sample and the paper substrate may interfere with the analyte ions. Therefore, the integration of PSI with high-field asymmetric ion mobility spectrometry (FAIMS) is of significant interest since it should reduce the background ions entering the mass analyzer without complicating the analysis or increasing analysis time. Here we demonstrate the integration of PSI with FAIMS/MS and its potential for analysis of samples of forensic interest. In this work, the parameters that can influence the integration, including sampling and ionization by paper spray, the FAIMS separation of analytes from each other and background interferences, and the length of time that a usable signal can be observed for explosives on paper, were evaluated with the integrated system. In the negative ion analysis of 2,4,6-trinitrotoluene (TNT), pentaerythritol tetranitrate (PETN), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), amounts as low as 1ng on paper were readily observed. The successful positive ion separation of a set of illicit drugs including heroin, methamphetamine, and cocaine was also achieved. In addition, the positive ion analysis of the chemical warfare agent simulants dimethyl methylphosphonate (DMMP) and diisopropyl methylphosphonate (DIMP) was evaluated. The integration of PSI-FAIMS/MS was demonstrated for the analyses of explosives in negative ion mode and for illicit drugs and CW simulants in positive mode. Paper background ions that could interfere with these analyses were separated by FAIMS. The compensation voltage of an ion obtained by FAIMS provided an additional identification parameter to be combined with the mass spectrum for each analyte.

Fast Orthogonal Separation by Superposition of Time of Flight and Field Asymmetric Ion Mobility Spectrometry.

Ion mobility spectrometry is a powerful and low-cost technique for the identification of chemical warfare agents, toxic chemicals, or explosives in air. Drift tube ion mobility spectrometers (DT-IMS) separate ions by the absolute value of their low field ion mobility, while field asymmetric ion mobility spectrometers (FAIMS) separate them by the change of their ion mobility at high fields. However, using one of these devices alone, some common and harmless substances show the same response as the hazardous target substances. In order to increase the selectivity, orthogonal data are required. Thus, in this work, we present for the first time an ambient pressure ion mobility spectrometer which is able to separate ions both by their differential and low field mobility, providing additional information for selectivity enhancement. This novel field asymmetric time of flight ion mobility spectrometer (FAT-IMS) allows high repetition rates and reaches limits of detection in the low ppb range common for DT-IMS. The device consists of a compact 44 mm drift tube with a tritium ionization source and a resolving power of 70. An increased separation of four substances with similar low field ion mobility is shown: phosgene (K0 = 2.33 cm2/(V s)), 1,1,2-trichlorethane (K0 = 2.31 cm2/(V s)), chlorine (K0 = 2.24 cm2/(V s)), and nitrogen dioxide (K0 = 2.25 cm2/(V s)). Furthermore, the behavior and limits of detection for acetonitrile, dimethyl methylphosphonate, diisopropyl methyl phosphonate in positive polarity and carbon dioxide, sulfur dioxide, hydrochloric acid, cyanogen chloride, and hydrogen cyanide in negative polarity are investigated.

Direct Analysis of Aerosolized Chemical Warfare Simulants Captured on a Modified Glass-Based Substrate by "Paper-Spray" Ionization.

Paper spray ionization mass spectrometry offers a rapid alternative platform requiring no sample preparation. Aerosolized chemical warfare agent (CWA) simulants trimethyl phosphate, dimethyl methylphosphonate, and diisopropyl methylphosphonate were captured by passing air through a glass fiber filter disk within a disposable paper spray cartridge. CWA simulants were aerosolized at varying concentrations using an in-house built aerosol chamber. A custom 3D-printed holder was designed and built to facilitate the aerosol capture onto the paper spray cartridges. The air flow through each of the collection devices was maintained equally to ensure the same volume of air sampled across methods. Each approach yielded linear calibration curves with R2 values between 0.98-0.99 for each compound and similar limits of detection in terms of disbursed aerosol concentration. While the glass fiber filter disk has a higher capture efficiency (≈40%), the paper spray method produces analogous results even with a lower capture efficiency (≈1%). Improvements were made to include glass fiber filters as the substrate within the paper spray cartridge consumable. Glass fiber filters were then treated with ammonium sulfate to decrease chemical interaction with the simulants. This allowed for improved direct aerosol capture efficiency (>40%). Ultimately, the limits of detection were reduced to levels comparable to current worker population limits of 1 × 10-6 mg/m3.

Raman Spectroscopic Detection for Simulants of Chemical Warfare Agents Using a Spatial Heterodyne Spectrometer.

Raman spectroscopic detection is one of the suitable methods for the detection of chemical warfare agents (CWAs) and simulants. Since the 1980s, many researchers have been dedicated to the research of chemical characteristic of CWAs and simulants and instrumental improvement for their analysis and detection. The spatial heterodyne Raman spectrometer (SHRS) is a new developing instrument for Raman detection that appeared in 2011. It is already well-known that SHRS has the characteristics of high spectral resolution, a large field-of-view, and high throughput. Thus, it is inherently suitable for the analysis and detection of these toxic chemicals and simulants. The in situ and standoff detection of some typical simulants of CWAs, such as dimethyl methylphosphonate (DMMP), diisopropyl methylphosphonate (DIMP), triethylphosphate (TEP), diethyl malonate (DEM), methyl salicylate (MES), 2-chloroethyl ethyl sulfide (CEES), and malathion, were tried. The achieved results show that SHRS does have the ability of in situ analysis or standoff detection for simulants of CWAs. When the laser power was set to as low as 26 mW, the SHRS still has a signal-to-noise ratio higher than 5 in in situ detection. The standoff Raman spectra detection of CWAs simulants was realized at a distance of 11 m. The potential feasibility of standoff detection of SHRS for CWAs simulants has been proved.