Design Of Devices Research Articles

Elastic metasurfaces for Scholte-Stoneley wave control.

In this work, we investigate the dynamics of Scholte-Stoneley waves (SSWs) travelling along elastic metasurfaces, e.g. thin resonant structures embedding mechanical oscillators, placed at the interface between solid and fluid. To this purpose, an analytical dispersion law, valid in the long-wavelength regime, is derived and used to reveal the hybridization of SSWs with the collective resonance of the mechanical oscillators and the conversion of SSWs into leaky modes within the fluid. The analytical predictions are validated through numerical simulations that include both dispersive and harmonic analysis. Our findings disclose the capabilities of elastic metasurfaces in filtering, trapping and converting SSWs along fluid-solid interfaces, thus supporting the design of novel devices for solid-fluid interaction across various engineering applications, including microfluidics. This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 1)'.

DEVELOPMENT OF NEW DESIGNS OF GP TYPE OIL-GAS BURNER DEVICES WITH NITROGEN OXIDES LOW EMISSION FOR OIL REFINERY FURNACES

The article discusses variants for new designs of GP type combined burner devices developed by the authors for oil refinery furnaces in order to reduce harmful emissions of toxic nitrogen oxides as one of the most dangerous chemicals. The main factors influencing the formation of nitrogen oxides during fuel combustion have been established. A classification of burner devices used in tube furnaces at oil refineries is given. Original designs of low-toxicity burner devices of the GP type, protected by patents for utility models differing from existing analogues in novelty and high environmental efficiency are recommended for implementation.

Ultra-broadband near-field Josephson microwave microscopy

Abstract Advanced microwave technologies constitute the foundation of a wide range of modern sciences, including microwave integrated circuits, quantum computing, microwave photonics, spintronics, etc. To facilitate the design of chip-based microwave devices, there is an increasing demand for state-of-the-art microscopic techniques capable of characterizing the near-field microwave distribution and performance. In this work, we integrate Josephson junctions onto a nano-sized quartz tip, forming a highly sensitive microwave mixer on-tip. This allows us to conduct spectroscopic imaging of near-field microwave distributions with high spatial resolution. Leveraging its microwave-sensitive characteristics, our Josephson microscopy achieves a broad detecting bandwidth of up to 200 GHz, as well as remarkable frequency and intensity resolutions. Near-field characterizations of microwave circuits are also conducted to demonstrate the capabilities of Josephson microscopy. Our work emphasizes the benefits of utilizing Josephson microscopy as a real-time, non-destructive technique to advance integrated microwave devices.

Two‐Electron Phenothiazine Based Cathode Achieved by Raising HOMO Energy Level for High Performance Lithium Organic Battery

AbstractRedox‐active p‐type phenothiazine based organic cathodes have captured increasing attention for lithium‐organic batteries due to their high voltage output and rich chemical modification. However, their capacities are generally limited to one redox event per molecule; while the di‐cation states are subject to rapid decomposition and cannot be effectively utilized. Herein, a scalable synthesis of phenothiazine‐based polymer (MPT‐CC) is reported, that can fully utilize the two‐electron storage by raising its highest occupied molecular orbital (HOMO). Lithium‐organic batteries using this polymer as cathode displayed a high specific capacity of 178 mAh g−1 at 0.2 A g−1. This polymer also displays excellent cycling stability. After 1000 cycles at 0.2 A g−1, a stable capacity of 194 mAh g−1 with ≈100% capacity retention can be obtained. Even at 2 A g−1 after 10,000 cycles, 98 mAh g−1 can be reversibly achieved. Its practical applicability has been successfully demonstrated in MPT‐CC//graphite full cell, also displaying good performance. This work contributes to a major advancement of phenothiazine‐based polymer design for high performance energy storage devices.

Design and Development of a Side Spray Device for UAVs to Improve Spray Coverage in Obstacle Neighborhoods

Electric multirotor plant protection unmanned aerial vehicles (UAVs) are widely used in China for efficient and precise plant protection at low altitude for low volumes. Unstructured farmland in China has various types of obstacles, and UAVs usually use a detour path to avoid obstacles due to flight altitude limitations. However, existing UAV spray systems do not spray when in obstacle neighborhoods during obstacle avoidance, resulting in insufficient droplet coverage and reduced plant protection quality in the area. To improve the droplet coverage in obstacle neighborhoods, this article carries out a study of side spray technology with an electric quadrotor UAV, and proposes the design and development of a side spray device. The relationship between the obstacle avoidance path of the UAV and the spray pattern of the side spray device and their effect on droplet coverage in obstacle neighborhoods was explored. An accurate measurement method of the relative position between the UAV and obstacles was proposed. Spray angle calculations and nozzle selection for the side spray device were carried out in conjunction with the relative position. A rotor wind field simulation model was designed based on the lattice Boltzmann method (LBM), and the spatial layout of the side spray device on the UAV was designed based on the simulation results. To explore suitable spray patterns for the side spray device, comparative experiments of droplet coverage in obstacle neighborhoods were carried out under different environments, spray patterns, and flight parameter combinations. The relationship between the flight parameter combinations and the distribution uniformity of droplets and the effective swath width of the side spray device was explored. The experimental results were analyzed by an analysis of variance (ANOVA) and a relationship model was obtained. The results showed that the side spray device can effectively improve droplet coverage in obstacle neighborhoods compared to a device without side spray using the same flight parameter combinations. The effective swath width in obstacle neighborhoods can be increased by a minimum of 6.35%, maximum of 35.32%, and average of 15.25% using the side spray device. The error between the predicted values of the relational model and the field experiment results was less than 15%. The results verify the effectiveness and rationality of the method proposed in this article. This study can provide technical and theoretical references for improving the plant protection quality of UAVs in obstacle environments.

Comprehensive numerical prototyping of paper-based microfluidic devices using open-source tools

Paper-based microfluidics has emerged as a promising field with diverse applications ranging from medical diagnostics to environmental monitoring. Despite significant progress in research and development, the translation of paper-based prototypes into practical end-user devices remains limited. This limitation stems from challenges related to devices not being sufficiently portable and autonomous, which paper-based microfluidics is expected to overcome. Yet for this purpose, we note the lack of comprehensive numerical modeling tools capable of simulating the intricate physicochemical phenomena involved in order to optimize the development process; hence, in this study, we introduce porousMicroTransport, a novel simulation package integrated with the open-source platform OpenFOAM®, designed to address these challenges. porousMicroTransport offers efficient solvers for fluid flow and transport phenomena in microfluidic porous media, including capillarity models and (bio)chemical reactions. Moreover, under horizontal flow conditions, porousMicroTransport application field can be extended to any porous media. We demonstrate the software’s effectiveness in two example cases, showcasing its ability to accurately reproduce complex phenomena involved in paper-based devices. By virtue of being an easy-to-use and computationally efficient tool, porousMicroTransport facilitates the design and optimization of devices, potentially enabling more devices to meet the WHO’s REASSURED criteria for point-of-care testing. We anticipate that this tool will accelerate the development and deployment of robust and portable diagnostic devices, bridging the gap between research and practical applications.

ADVANCING MEMORY DENSITY: A NOVEL DESIGN FOR MULTIPLE-BIT-PER-CELL PHASE CHANGE MEMORY

Multiple-bit-per-cell phase-change memory (MPCM) has emerged as a promising solution to address the escalating demands for high-density, low-power, and fast-access memory in modern computing and data storage systems. This paper presents a novel device design aimed at enabling multiple bits per cell in phase-change memory, thereby significantly enhancing memory density while maintaining performance and reliability. Leveraging innovative material compositions and advanced fabrication techniques, the proposed design demonstrates the potential to push the boundaries of memory capacity, efficiency, and scalability. Through comprehensive simulation analysis and performance evaluations, we showcase the feasibility and advantages of the new device design, highlighting its potential to revolutionize memory architectures and meet the evolving needs of next-generation computing systems.

Advancements and challenges of industrial‐level acidic CO2 electrolysis

AbstractThe use of green renewable energy to convert carbon dioxide (CO2) into valuable chemicals and fuels through CO2 electrolysis technology (also known as electrochemical CO2 reduction reaction, eCO2RR) is an advantageous technology, which could greatly aid the global carbon‐neutral goal. Although progress has been made in alkaline/neutral media, low carbon conversion efficiency to target products, carbonate/bicarbonate salt precipitation, and blockage of electrode holes caused by CO2 are not conducive to industrial applications. Acidic media could address these issues; however, in these conditions, there are other challenges that need to be addressed, such as hydrogen evolution, poor tolerance of electrocatalysts, and electrolysers. This review discusses recent advances in industrial‐level acidic CO2 electrolysis, including reaction mechanisms, electrocatalysts, and device design, aiming to promote its commercialization. In addition, a comprehensive evaluation strategy of an acidic eCO2RR system is proposed, and perspectives are provided based on related discussion.

Flexible roles of TiO2 in enhancing carrier separation for the high photocatalytic performance of water treatment under different spectrum sunlight

Construction of heterogeneous-photocatalysts is an effective mean for enhancing charge separation, however, the specific roles of the individual components have not been thoroughly explored. In this article, a heterogeneous-photocatalyst, TiO2/MoO3-x, was constructed, revealing that the two components, TiO2 and MoO3-x, play varying roles under different light spectra. Under full spectrum light, an S-scheme mechanism was achieved, which preserved the high oxidizing and reducing property of MoO3-x and TiO2, facilitating an augmented generation of reactive oxygen species (ROS). Under visible light, the MoO3-x functioned as the donor of hot electrons and the TiO2 served as the receptor platform for these electrons. The presence of the interfacial electric field enabled the transfer of hot electrons, leading to an enhanced ROS generation. Consequently, the TiO2/MoO3-x achieved high photocatalytic activity under both full spectrum and visible light. The optimized TiO2/MoO3-x catalyst demonstrated outstanding antibacterial efficacy, achieving eradication rates of 98.1 % for Staphylococcus aureus, and 99.6 % for Escherichia coli respectively. Additionally, it exhibited substantial degradation activity with a rate of 0.028 min−1 for Rhodamine B (50 mg/L). Furthermore, the TiO2/MoO3-x membrane removed approximately 81.2 % of bacteria from surface water, underscoring the potential of the designed membrane in water purification systems. This article explored the distinct roles and corresponding charge transfer mechanisms of the TiO2 and MoO3-x under full spectrum or visible light, offering innovative ideas for the design of full-spectrum photocatalysts with high efficiency. The straightforward design of membrane-based filtering device demonstrated wide applications for treating wastewater for the removal of dye and bacterial contamination.

A microwave-assisted, solvent-free approach for effective grafting of high-permittivity fillers to construct homogeneous polymer-based dielectric film with high energy density

Polymer-based dielectric film capacitors are essential energy storage components in high-power energy storage devices benefiting from their high breakdown strength (Eb) and ultra-fast charge storage/release capability. However, the state-of-the-art commercial capacitor, biaxially oriented polypropylene (BOPP), exhibits limited energy storage density primarily due to low dielectric constant, which hinders the advancement of the film capacitor industry. Introducing high-permittivity (high-k) nanofillers into PP matrix to improve polarization is a promising method but poor filler dispersion leads to a remarkable decrease of Eb, while various strategies to enhance dispersion of fillers typically require sophisticated process involving toxic procedure and consuming significant time and cost. Herein, we show that a novel and scalable surface grafting method for high-k fillers can be achieved by a facile and short-period microwave irradiation with the assistance of silane coupling agent (KH560). As a demonstration, the KH560 is effectively grafted onto the surface of barium titanate (BT), achieving a high grafting ratio of 4.91 % at a yield of 85.1 % within a short time (40s). Furthermore, the surface modified BT nanofillers are introduced into PP matrix and then biaxially stretched. The as-prepared film exhibits excellent dispersion and superior compatibility, resulting in a remarkable enhancement of tensile strength (from 82 MPa to 115.4 MPa), breakdown strength (from 200 MV/m to 254 MV/m), and energy density (from 1.49 J/cm3 to 2.21 J/cm3). This work proposes a new strategy for constructing homogeneous polymer-based dielectric film by microwave activating high-k fillers and is crucial for the design of next-generation energy storage devices.

Advanced controller design for D-FACTS device in grid-connected photovoltaic system controller

Advanced controller design for D-FACTS device in grid-connected photovoltaic system controller

Phase Separation Manipulated Gradient Conductivity for A High‐Precision Flexible Pressure Sensor

AbstractPiezoresistive pressure sensors, analyzing and converting external pressure signals to readable electrical signals for monitoring human health, are always subjected to simultaneously possess high signal‐linearity and signal sensitivity. Analogous to the control of sophisticated microstructure for increasing active sensing area, the control of gradient conductivity should enable a linear response via regulating the formed saturation current. Here, inspired by phase separation showing the feasibility of controlling material microstructure and conductivity, a high‐performance flexible pressure sensor via the simultaneous control of microgroove structure and wide‐range gradient conductivity is demonstrated. First, a laser‐etching and dopamine (DA)‐doping synergistic approach is used to induce selective phase separation in poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonic acid) (PEDOT:PSS), achieving broad conductivity modulation (from 297 to 4525 S cm−1) and precise microgroove pattern (15.5 µm). Then, by designing conductivity‐gradient PEDOT: PSS‐based multi‐sublayers and microgroove interlocked structure, the sensor shows extraordinarily comprehensive performance of excellent stress‐sensing sensitivity (4 × 105 kPa−1), high linear responsiveness (99.85%) and wide‐range sensing ability (up to 100 kPa). Consequently, this sensor reveals excellent capability in detecting multi‐mode pressure changes and is expected to branch out into other electronic device designs as a general strategy for the precise manipulation of material physical‐chemical properties.

Electric-Mechanical coupling analysis of two-dimensional piezoelectric heterogeneous materials in flexible electric devices with extended multiscale isogeometric analysis

Piezoelectric heterogeneous materials are widely used in flexible electronic device design, enhancing sensitivity to external stimuli like pressure and acceleration. Despite their usefulness, analyzing these inherently periodic structures poses significant computational challenges. In response, this paper presents a multiscale isogeometric analysis approach tailored for simulating piezoelectric materials. We introduce an electric-mechanical coupling model using isogeometric analysis (IGA) for two-dimensional piezoelectric membrane structures, assuming the plane stress hypothesis. Our proposed algorithm enables precise calculation of both displacement and electric potential solutions, demonstrating superior convergence properties compared to traditional finite element methods. Furthermore, we extend this approach to multiscale isogeometric analysis for computing numerical solutions in porous structures and heterogeneous composite piezoelectric materials under tensile and bending conditions. Through rigorous numerical testing, we evaluate the proposed extended multiscale isogeometric analysis method, showcasing its efficacy in achieving a balance between computational efficiency and simulation accuracy. This IGA-based electro-mechanical coupling model and numerical algorithm pave the way for more streamlined and precise simulations of piezoelectric materials within the context of flexible electronic devices.

Advances in High-Frequency Surgical Device Design and Safety

Advances in High-Frequency Surgical Device Design and Safety

In silico investigation of the reliable models of drug delivery from blood vessels to tumor using tumor spheroid-on-chip models

Due to the limitations of two-dimensional models in mimicking intratumoral drug delivery, three-dimensional tumor spheroid-on-chip models have been considered recently. Even though various models have been proposed in this field, many unknowns still exist about their reliability in imitating in vivo conditions. In addition, most of these models neglect the replication of drug transport from the bloodstream. In the current research, considering the interface of tumor and blood vessels, new designs of microfluidic devices are developed to resemble the in vivo conditions more closely. Then, drug transport in the proposed models is studied numerically using porous media theory under dynamic conditions. The simulation results of drug concentration, cell viability, fluid shear stress, and pressure distributions are compared with those of a solid tumor. As the results demonstrate, our proposed models can well mimic the in vivo conditions, including drug delivery through blood vessels. Therefore, in addition to developing tumor spheroid-on-chip models resembling tumor-vessel interaction, the present study provides a strong strategy to evaluate the reliability of in vitro models in replicating intratumoral drug delivery.

Altermagnetism Induced by Sliding Ferroelectricity via Lattice Symmetry-Mediated Magnetoelectric Coupling.

Altermagnets, distinct from conventional ferromagnets or antiferromagnets, have recently attracted attention as the third category of collinear magnets, which exhibit the coexistence of zero net magnetization and spin polarization due to their unique lattice symmetries. Meanwhile, the additional layer degrees of freedom in multilayer sliding ferroelectrics offer opportunities for coupling with lattice symmetries, paving the way for an innovative approach to constructing multiferroic lattices. In this study, altermagnetic tuning in SnS2/MnPSe3/SnS2 heterostructures is achieved by breaking and restoration of lattice inversion symmetry through sliding ferroelectric switching. First-principles calculations reveal that the spin density and corresponding time-reversal symmetry of MnPSe3 can be manipulated by lattice symmetry, triggering phase transitions between antiferromagnetism and altermagnetism. This research establishes a novel form of magnetoelectric coupling mediated by lattice symmetry and provides a theoretical basis for the design of miniature information processing and memory devices based on altermagnetism.

Raman spectroscopy of atomically thin HfX2 (X=S, Se)

Abstract We investigated interlayer modes of few-layer HfX2 (X=S, Se) by using low-frequency micro-Raman spectroscopy with three excitation energies (1.96 eV, 2.33 eV, 2.54 eV) under vacuum condition (10−6 Torr). We observed interlayer modes in HfSe2 when the 2.54-eV excitation energy was used. The low-frequency Raman spectra reveal a series of shear and breathing modes (<50 cm−1) that are helpful for identifying the number of layers. The in-plane Eg and out-of-plane A1g modes of HfSe2 are located at ~150 cm−1 and ~200 cm−1, respectively. In HfS2, in-plane Eg and out-of-plane A1g optical phonons are observed at ~260 cm−1 and ~337 cm−1, respectively. The in-plane and out-of-plane force constants of atomically thin HfSe2 are obtained to be 1.87 ×1019 N/m3 and 6.55×1019 N/m3, respectively, by fitting the observed interlayer modes using the linear chain model. These results provide valuable information on materials parameters for device designs using atomically-thin layered HfX2 (X=S, Se).

Investigation of thermal, optical properties, AC conductivity and broadband dielectric spectroscopy of poly(ethyl methacrylate)/poly(vinyl chloride) polymer blend

This work reports the structural, thermal, optical and electrical properties of PEMA, PVC and their polyblends. These properties are investigated by FTIR, TGA, UV/Vis and broadband dielectric spectroscopy. FTIR spectra showed that the characteristic bands of PEMA and PVC are affected by blending and displayed red and blue shifts confirming that an intermolecular interaction between PEMA and PVC is occurred. Thermal degradation kinetics of PEMA, PVC and its polyblend samples is investigated in details and the thermal properties of each decomposition stage are estimated. UV measurements analysis revealed that Urbach energy (EU) is increased while optical bandgap decreased upon increasing the PVC content. The indirect and direct band gap (Eig/Edg) values are decreased from (3.95/4.21) to (3.10/3.92) eV. Also, upon increasing the content of PVC, the lattice dielectric constant (εL) is increased from 2.71 to 7.83. Wemple-DiDomenico model is applied for investigating the refractive index dispersion and to calculate the oscillator and dispersion energies. It is observed that the linear/nonlinear parameters are increased nonlinearly with increasing the PVC content. χ(1), χ(3) and n2 values are found to increase from 0.104, 0.213 × 10−13 and 4.01 × 10−12 to 0.363, 31.26 × 10−13 and 5.33 × 10−12. These results make PEMA/PVC polyblend strong candidates for use in the development and design of advanced optoelectronic devices. AC conductivity (σac) and dielectric measurements are carried out at various temperatures in wide frequency range. Jonscher power law is applied and showed that the predominant conduction mechanism in our samples is overlapping large-polaron tunneling (OLPT). The dielectric constant and electrical impedance are found to be frequency and temperature dependent. The investigation of the electric modulus (M*) revealed that M′ is increased non-linearly with increasing the frequency, while M″ spectra displayed two different modes of relaxation. The interfacial polarization (IP) is observed in low frequency region, while, dipolar relaxation is detected in high frequency region.

Trap Depth Distribution Determines Afterglow Kinetics: A Local Model Applied to ZnGa2O4:Cr3.

Persistent luminescence materials have applications in diverse fields such as smart signaling, anticounterfeiting, and in vivo imaging. However, the lack of a thorough understanding of the precise mechanisms that govern persistent luminescence makes it difficult to develop ways to optimize it. Here we present an accurate model to describe the various processes that determine persistent luminescence in ZnGa2O4:Cr3+, a workhorse material in the field. A set of rate equations has been solved, and a global fit to both charge/discharge and thermoluminescence measurements has been performed. Our results establish a direct link between trap depth distribution and afterglow kinetics and shed light on the main challenges associated with persistent luminescence in ZnGa2O4:Cr3+ nanoparticles, identifying low trapping probability and optical detrapping as the main factors limiting the performance of ZnGa2O4:Cr3+, with a large margin for improvement. Our results highlight the importance of accurate modeling for the design of future afterglow materials and devices.

Design and Experiments of a Roll-Knife Pickup for a Buckwheat Pickup Harvester

To reduce grain loss during pickup and prevent stalk entanglement in buckwheat harvesters, thereby improving the quality of mechanized harvesting, a three-stage pickup conveyor roll with a ground-level rotary knife-type pickup header was designed and tested. This paper, based on the growth characteristics of buckwheat, determined the three-stage pickup conveying process and the overall structure of the ground-level rotary knife-type pickup header. Kinematic analysis and parameter design of the rotary knife-type pickup roll were conducted. Finally, a physical prototype was fabricated, and field performance tests were carried out, using machine forward speed and pickup roll rotational speed as influencing factors and pickup loss rate as an evaluation metric. Results showed that the interaction between pickup roll rotational speed and forward speed had a significant effect on the pickup loss rate, with forward speed having a greater impact than pickup roll rotational speed. Under consideration of their interaction, when the pickup roll rotational speed was within the range of 396–457 r/min, and the forward speed was between 0.9–1.0 m/s, the pickup loss rate was minimized. Based on the regression equation model, the predicted optimal conditions were a forward speed of 1.0 m/s and a roll pickup speed of 396 rpm. Under these conditions, the test results showed a pickup loss rate of 5.235%, indicating good pickup performance. This research provides a reference for the design of pickup devices in grain combine harvesters.